Nutaq's TitanMIMO Massive MIMO Testbeds

Massive MIMO Testbeds

September 2014

Martin Turgeon, PLM

Nutaq

Wireless Product Family

TitanMIMO Series PicoSDR Series ZeptoSDR Series

- Portable Wireless Device

- Low Power, SISO

- FMC-based Radio Head

- BTS, Small Cells, CRs, MIL SDRs

- Up to 8 RF TRXs Support

- FMC-based Radio Head

- 5G Backhaull/RAN, WiGIG,

Beamformers, Massive MIMO

- MIMO RADAR

- Up to 1000 RF TRXs Support

- FMC-based Radio Head

Portable MIL+4G Prototyping Performing MIL+4/5G Prototyping Advanced 5G, Massive MIMO,

MIMO RADAR Prototyping

TitanMIMO Series

Value Proposition

.4

User-defined Topologies

20 Gbps

Copper/Optical

User-Defined Links

MiniSAS High Speed Physical Copper/Optical Interface

Virtex-6 GTX

Provided Aurora-4x (20 Gbps) IP Core

OR

User-Defined IP (CPRI, Others)

RRH 6-Series

RF: • 8x RF TRX

• 70 MHz to 6 GHz Tuning

• 0.2 to 56 MHz BB BW

• RF Filter bank or Bypass

Digital: • 7x 20 Gbps Copper/Optical

Interfaces

• Total = 140 Gbps

• 1x (out of 7 ) 20 Gbps

required for the all 8 TRXs,

full BW full-duplex transfer

FMC Radio640

AD9361

LPC

Ref/Clk IN

TX1 (FDD)

TX/RX1 (TDD)

RX1 (FDD)

PPS/Trig IN

LO IN 1

LO IN 2

Clocking

Clk from carrier

RX and TX data

GPIO

ctrl

ctrl

SWWB

Matching

WB Att and

Gain

SW

Filter banks

(LTE – Massive

MIMO – etc)

WB

Matching

WB Att and

Gain

TX2 (FDD)

TX/RX2 (TDD)

RX2 (FDD)

SWWB

Matching

WB Att and

Gain

SW

Filter banks

(LTE – Massive

MIMO – etc)

WB

Matching

WB Att and

Gain

RRH X-Series 250 MHz BW

IQ Samplers: • 8x 250 MSPS ADCs

(14-bit)

• 8x 1000 MSPS DACs

(16-bit)

• 4x User-Supplied TRX

supported (IQ scheme)

Digital: • 7x 20 Gbps

Copper/Optical

Interfaces

• 2x (out of 7 ) 20 Gbps

required for the all 4

TRXs, full BW full-duplex

transfer

RRH X-Series 125 MHz BW

IQ Samplers: • 16x 125 MSPS ADCs

(14-bit)

• 16x 1000 MSPS DACs

(16-bit)

• 8x User-Supplied TRX

supported (IQ scheme)

Digital: • 7x 20 Gbps

Copper/Optical

Interfaces

• 2x (out of 7 ) 20 Gbps

required for the all 8

TRXs, full BW full-duplex

transfer

RRH X 125 MHz BW

(60GHz RF) QEOS RFIC

16 IQ

16 IQ

QW6022

V-band User-Defined FE

RRH Stand-Alone/Stackable

RRH Stackable Stand-Alone

Optional 4Ci7

1x RRH Nx RRH

Remote Radio Head

Topologies

RRH-Only 6-Series

RRH-Only X-Series

Unlimited BB Processing

Unlimited Channel Count

Processing: • 8x SX475T Virtex-6

• 4GB SDRAM per FPGA

Throughput: • 32x 20 Gbps

Copper/Optical Interfaces

• Total = 640 Gbps

Octal V6 BB Core Detailed

RRH-Octal-V6 6-Series

RRH-Octal-V6 X-Series

Synchronized CLKs

(uSync-CLK)

Synchronized LOs

(uSync-LO)

TitanMIMO-6

TDD Antenna Option

• Dual-band WiFi (2.4 /5 GHz)

• 4 antennas per PCB Module

• 8 antennas per RRH (2 mod)

• Stackable to any 4xN channels

• Support multiple arrays shape

• Customizable to other bands

(LTE, as example)

RRH

TitanMIMO-6

TDD Antenna Option

TitanMIMO-6

TDD Antenna Option

TitanMIMO-6

TDD Antenna Option RX/TX

Calibration Path Included

• Capacitive Links

• For TX calibration, all

transmits signals can be

added at the same receiver

input. Channel separation

can be done at the digital

level since they are

orthogonal.

Thank You!

Martin Turgeon

Product Leader

T. 418 914-7484 x2311 | 1 855 914-7484 | C. 418-262-5820 | F. 418 914-9477

2150, Cyrille-Duquet, Québec (Québec) G1N 2G3 CANADA

martin.turgeon@nutaq.com

www.nutaq.com

Thank You!