View
218
Download
1
Category
Preview:
Citation preview
1
2 0 1 4 P R O D U C T L I S T
ΜΕGANOL LUBRICANTS ARE TOP QUALITY PRIMARY LUBRICANTS,
SPECIFICALLY DEVELOPED TO MEET ALL THE REQUIREMENTS OF
MODERN ENGINES AND TRANSMISSION SYSTEMS USED IN CARS AND
MACHINERY.
THEY EXCEED MANUFACTURER SPECIFICATIONS. THEY ARE
PRODUCED IN THE EUROPEAN UNION (GREECE) IN A MANUFACTURING
PLANT THAT IS CERTIFIED ACCORDING TO THE QUALITY SYSTEM “UKAS
ISO 9001:2008”.
KRYSTALLI ST. & DRAGATSANIOU ST., 30100 AGRINIO. TEL.: +30 26410-
31370, +30 2641 400805 FAX: +30 26410-55140.
E-mail: info@mousakian.gr. Website: www.mousakian.gr
Welcome to the Product List for
MEGANOL LUBRICANTS
I N T R O D U C T I O N
We do hope that the following pages will provide you with a clear and effective
presentation of the products of MEGANOL LUBRICANTS, which are distinguished in the
market for their consistent quality and top technology.
MEGANOL LUBRICANTS is capable of supplying, upon order, other specialized
products too, which are not included in the product list.
2
C O N T E N T S
LUBRICANTS FOR PETROL ENGINES…
LUBRICANTS FOR DIESEL ENGINES…
LUBRICANTS FOR FARM MACHINERY AND TRACTORS …
LUBRICANTS FOR MOTORCYCLES …
LUBRICANTS FOR TRANSMISSION SYSTEMS …
LUBRICANTS FOR DIFFERENTIALS - GEAR OILS …
AUTOMATIC GEARBOX AND POWER ASSISTED STEERING FLUIDS …
LUBRICANTS FOR HYDRAULIC SYSTEMS …
INDUSTRIAL LUBRICANTS FOR ENCASED GEARBOXES (GEAR REDUCERS) …
LUBRICANTS FOR AIR COMPRESSORS …
LUBRICANTS FOR PNEUMATIC TOOLS …
LUBRICANTS FOR HEAT TRANSMISSION SYSTEMS …
LUBRICANTS FOR WIRE RORES …
LUBRICANTS FOR METAL CUTTING AND PROCESSING DEVICES …
LUBRICANTS FOR MARINE OUTBOARD MOTORS …
LUBRICANTS FOR MARINE MOTORS …
LUBRICANTS FOR CHAINSAWS …
ALL PURPOSE LUBRICANTS …
GREASES …
3
L U B R I C A N T S F O R P E T R O L E N G I N E S
MEGANOL MOBI 960 SAE5W30
A 100% synthetic, new generation lubricant based on the LOW SAPS (Sulfated Ash,
Phosphorus, Sulfur) technology. It is custom made for the EURO IV engines of BMW and
MERCEDES BENZ, as well as the state-of-the-art engines manufactured from 2002
onwards. Its top technology improves the lifetime and effectiveness of exhaust gas
processing systems.
It exceeds the following specifications:
API SN/CF, ACEA C3-10, ACEA A3/B3, B4-08
ACEA A5/B5-04, C2-04, MB.229.51
BMW LONG LIFE-ON, VW 502.00/505, PORSCHE.
Packaging:
180KG, 4X4LT, 16X1LT
PRODUCT: ΜΟΒΙ 960 SAE 5W/30
(100% SYNTHETIC)
API SN, SM/CF, ACEA A3/B3/B4-08, C3-10
MERCEDES BENZ 229, 51, VW 502.00/505.00,
PORSCHE, BMW LONG LIFE - 04
ROVER
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,850
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 11,90
3. Viscocity index (ASTM D 2270) 173
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 7,50
MEGANOL MOBI 930 SAE5W40
A 100% synthetic lubricant based on the LOW SAPS (Sulfated Ash, Phosphorus, Sulfur)
technology. It is custom made for the new state-of-the-art engines using the EURO IV
4
technology. Its top technology improves the lifetime and effectiveness of exhaust gas
processing systems. It also keeps the engine perfectly clean and protects it against damage.
It exceeds the following specifications:
API SN/CF, MB 229.31, ACEA C3-10, A3/B4-08
BMW LONG LIFE-ON, VW 502.00/505.00, PORSCHE
Packaging:
4X4LT, 16X1LT
PRODUCT: ΜΟΒΙ 930 SAE 5W/40
(100% SYNTHETIC)
API SN, SM/CF, ACEA A3/B3/B4-08
ACEA C3-10
MERCEDES BENZ 229.31,
BMW LONG LIFE - 04
VW 502.00/505.00
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,860
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,50
3. Viscocity index (ASTM D 2270) 178
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 7,50
MEGANOL MOBI 900 SAE5W40
A 100% synthetic, state-of-the-art, direct-flow lubricant for long oil drain intervals. It is
ideal for catalytic, multi-valve, TURBO petrol engines and diesel engines. It provides
perfect lubrication under the worst operating conditions. It keeps the engine clean and
ensures high anti-oxidation protection. It also ensures minimum lubricant consumption,
thus allowing for long oil drain intervals. It also helps reduce fuel consumption.
It exceeds the following specifications:
API SM/CF, ACEA A3/B3/B4-08,
MERCEDES BENZ 229.3, VW 502.00/505.00,
BMW LONGLIFE-98, PORSCHE, ROVER
Packaging:
180KG, 4X4LT, 16X1LT
5
PRODUCT: ΜΟΒΙ 900 SAE 5W/40
(100% SYNTHETIC)
API SL/CF, ACEA A3/B3/B4
MERCEDES BENZ 229.3, VW 502.00/505.00
PORSCHE, BMW LONG LIFE - 98
ROVER, OPEL GM - LL- B-025
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,860
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,60
3. Viscocity index (ASTM D 2270) 179
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 10,10
MEGANOL MOBI 800 SAE10W40
A 100% synthetic, multigrade lubricant that is custom made for state-of-the-art engines
and high performance levels. It provides the engine with increased protection against
damage, as well as perfect lubrication under a wide range of temperatures, also ensuring
low fuel consumption and exhaust gas levels. It is appropriate for all catalytic, multi-valve
and TURBO petrol engines.
It exceeds the following specifications:
ΑΡΙ SL/CF,ACEA A3/B3/B4,MERCEDES BENZ 229.3,
VW 502.00/505.00,BMW LONG LIFE-98, PORSCHE, ROVER
Packaging:
180KG, 4X4LT, 16X1LT
PRODUCT: ΜΟΒΙ 800 SAE 10W/40
(100% SYNTHETIC)
API SL/CF, ACEA A3/B3/B4
MERCEDES BENZ 229.3, VW 502.00/505.00,
PORSCHE, BMW LONG LIFE -98, ROVER
6
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,865
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,20
3. Viscocity index (ASTM D 2270) 175
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 10,10
MEGANOL MOBI 730 SAE15W40
A semi-synthetic, multigrade lubricant that is custom made for state-of-the-art, high
performance, catalytic, multi-valve, turbo engines. It is ideal for TAXI engines. It ensures
perfect protection under the worst operating conditions. It performs ideally against
oxidation. It helps cut down on fuel consumption and exhaust gas levels. It ensures long
lubricant oil drain intervals.
It exceeds the following specifications:
API SL/CF, ACEA A3-02, B3-00/2, MERCEDES
BENZ 229.1, VW 505.00, ROVER.
Packaging:
4X4LT, 16X1LT
PRODUCT: ΜΟΒΙ 730 SAE 15W/40
(SEMI SYNTHETIC)
API SL/CF, ACEA A3-02, B3-00/2
MERCEDES BENZ 229.1, VW 505.00
ROVER
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,878
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,00
3. Viscocity index (ASTM D 2270) 150
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 6,80
7
MEGANOL MOBI 700A SAE10W40
A semi-synthetic lubricant for petrol and diesel engines used in passenger and lightweight
professional vehicles. It improves engine performance and lifetime under the worst
operating conditions, ensuring long oil drain intervals. It ensures high anti-oxidation
resistance levels, keeps the engine clean and helps reduce fuel consumption levels and
exhaust gas pollutants.
It exceeds the following specifications:
API SM/CF, M.B229.1, VWW505.00 ACEA A3/B4-04
Packaging:
4X4LT, 16X1LT
MEGANOL MOBI 700 SAE10W40
A semi-synthetic, multigrade lubricant that is custom made for state-of-the-art, high
performance, catalytic, multi-valve, turbo engines. It is ideal for TAXI engines. It ensures
perfect protection under the worst operating conditions. It performs ideally against
oxidation. It helps reduce fuel consumption and exhaust gas levels. It ensures long
lubricant oil drain intervals.
It exceeds the following specifications:
API SL/CF, ACEA A3-02, B3-00/2, MERCEDES
BENZ 229.1, VW 505.00, ROVER.
Packaging:
1000LT, 180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: ΜΟΒΙ 700 SAE 10W/40
(SEMI SYNTHETIC)
API SL/CF, ACEA A3-02, B3-00/2
MERCEDES BENZ 229.1, VW 505.00
ROVER
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,875
8
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,70
3. Viscocity index (ASTM D 2270) 155
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 6,80
MEGANOL MOBI 650 SAE10W40
A synthetic-based, multigrade lubricant that is custom made for state-of-the-art, high
performance, catalytic, multi-valve, turbo petrol and diesel engines. It is ideal for TAXI
engines. It ensures perfect protection under the worst operating conditions. It performs
ideally against oxidation. It helps reduce fuel consumption and exhaust gas levels. It
ensures long lubricant oil drain intervals.
It exceeds the following specifications:
API SL/CF, MERCEDES BENZ 229.1, VW 505.00, ROVER.
Packaging:
1000LT, 180KG, 18LT, 4Χ4LT, 16X1LT, 4Χ5LT
PRODUCT: ΜΟΒΙ 650 SAE 10W/40
(SYNTHETIC BLEND)
API SL/CF,
MERCEDES BENZ 229.1, VW 505.00
ROVER
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,878
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,30
3. Viscocity index (ASTM D 2270) 138
4. Pour point (ASTM D 97) °C -36
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MOBI 600 SAE15W50
A semi-synthetic, multigrade, high performance lubricant. It is designed for new
technology, high performance, catalytic, TURBO and multi-valve engines. It keeps the
engine in brand new condition and helps catalysts function efficiently.
9
It exceeds the following specifications:
API SL/CF, ACEA A3-O2, B3-00/2, MERCEDES BENZ 229.1, VW 505.00, ROVER
Packaging:
4Χ4LT, 16X1LT
PRODUCT: ΜΟΒΙ 600 SAE 15W/50
(SEMI SYNTHETIC)
API SL/CF, ACEA A3-02, B3-00/2
MERCEDES BENZ 229.1,VW 505.00
ROVER
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,881
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 19,50
3. Viscocity index (ASTM D 2270) 155
4. Pour point (ASTM D 97) °C -30
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 6,80
MEGANOL MOBI 500 SAE15W50
A top quality mineral oil that is suitable for catalytic and conventional petrol engines, as
well as diesel engines used in passenger vehicles and lightweight trucks.
It exceeds the following specifications:
API SL/CF, ACEA A3-98, B3-98/2, MERCEDES
BENZ 229.1, VW 505.00.
Packaging:
4X4LT, 16X1LT, 18LT
PRODUCT: ΜΟΒΙ 500 SAE 15W/50
API SL/CF, ACEA A3-98, B3-98/2,
10
MERCEDES BENZ 229.1, VW 505.00
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,889
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 19,50
3. Viscocity index (ASTM D 2270) 138
4. Pour point (ASTM D 97) °C -30
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MOBI 400 SAE20W50
An exceptionally strong multigrade lubricant that can be used all year round thanks to its
very high viscosity index and its low pour point when the weather is cold. It is suitable for
state-of-the-art catalytic and conventional engines.
It exceeds the following specifications:
API SG/CF-4, CE, ACEA A3-96/B3-96, CCMC G-4/PD2
Packaging:
4Χ4LT, 16X1LT
PRODUCT: ΜΟΒΙ 400 SAE 20W/50
API SG/CF- 4, CE, ACEA A3-96/B3-96,
CCMC G-4/PD2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,889
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 19,00
3. Viscocity index (ASTM D 2270) 133
4. Pour point (ASTM D 97) °C -30
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 7,00
MEGANOL MOBI 350 SAE20W50
A multigrade high performance lubricant that is recommended for petrol and diesel engines
used under adverse conditions. It ensures protection against friction, damage as well as
combustion residues.
11
It exceeds the following specifications:
API SF/CF, CCMC D4/G2
MERCEDES BENZ 277.0, ALLISON C3
Packaging:
1000LT, 180KG, 18LT, 4X4LT, 16X1LT
MEGANOL MOBI 300 SAE20W50
A multigrade lubricant of mineral origin. It can be used in petrol and diesel engines that are
not very demanding.
It exceeds the following specifications:
API SF/CF, CCMC G2/D1, M.B. 226.0
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: ΜΟΒΙ 300 SAE 20W/50
API SF/CF, CCMC G2/D1, M.B. 226.0
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 298) Kg / l at 15°C 0,890
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 18,80
3. Viscocity index (ASTM D 2270) 126
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MOBI 200 SAE40
Monograde lubricants with special additives intended to protect the engine against
oxidation, corrosion and damage. They are also suitable as supplements for petrol and
diesel engines based on previous technologies.
It exceeds the following specifications:
API SC/CC, MIL-L-2104B
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
12
PRODUCT: ΜΟΒΙ 200 SAE 40
API SC/CC, MIL - L - 2104B
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,888
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,00
3. Viscocity index (ASTM D 2270) 98
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
6. Total number of bases (ASTM D 2896) mg KOH /g 4,00
MEGANOL MOBI 100 SAE30
Monograde lubricants with special additives intended to protect the engine against
oxidation, corrosion and damage. They are also suitable as supplements for petrol and
diesel engines based on previous technologies.
It exceeds the following specifications:
API SC/CC, MIL-L-2104B
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: ΜΟΒΙ 100 SAE 30
API SC/CC, MIL - L - 2104B
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,887
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,30
3. Viscocity index (ASTM D 2270) 99
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 4,00
MEGANOL MOBI 080 SAE20
Monograde lubricants with special additives intended to protect the engine against
oxidation, corrosion and damage. They are also suitable as supplements for petrol and
diesel engines based on previous technologies.
13
It exceeds the following specifications:
API SC/CC, MIL-L-2104B
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
14
L U B R I C A N T S F O R D I E S E L E N G I N E S
MEGANOL MODI 960 SAE5W30
A 100% synthetic, multigrade UHPD (Ultra High Performance Diesel) lubricant for diesel
engines. A lubricant that is custom made for Euro 4 diesel engines. Its pioneering
composition ensures high protection levels for state-of-the-art engines produced by
European manufacturers. It ensures a significant reduction in fuel consumption and
maintenance costs and helps keep the engine clean.
It exceeds the following specifications:
MERCEDES BENZ 228.5, ACEA E4-99/3, ACEA E7-04,
API CF, MAN M 3277,MTU TYPE III, VOLVO VDS-3,
SCANIA LDF-2, CUMMINS CES 20072, DAF, RENAULT RXD
Packaging:
4X4LT, 16X1LT
PRODUCT: MODΙ 960 SAE 5W/30
UHPD TURBO DIESEL
EURO 5 (100% SYNTHETIC)
API CF
ACEA E7-08/2, ACEA E4-08/2
MERCEDES BENZ 228.5, MAN M 3277, MTU TypeIII
CUMMINS CES 20072
VOLVO VDS-3, SCANIA LDF-2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,850
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 12,10
3. Viscocity index (ASTM D 2270) 178
4. Pour point (ASTM D 97) °C -45
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 15,40
MEGANOL MODI 930 SAE5W40
A 100% synthetic UHPD (Ultra High Performance Diesel), LOW SAPS (Low Sulfated
Ash, Phosphorus, Sulfur) lubricant for diesel engines, which ensures prefect protection and
helps cut down on fuel costs. It is designed for the new EURO IV & V engines that feature
a Diesel Particulate Filter (DPF), and a Selective Catalytic Reduction (SCR) system.
15
It exceeds the following specifications:
ACEA E4/Ε6/Ε7, API CΙ-4, JASO DH-2,
MERCEDES BENZ 228.51MAN M 3477, M 3271-1,
VOLVO VDS-3, SCANIA LOW ASH, MTU TYPE 3.1,
CATERPILLAR ECF-1-a, DEUTZ DQC-III-10-LA, DQC-IV-10-LA.
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
MEGANOL MODI 900 SAE10W40
A 100% synthetic, multigrade UHPD (Ultra High Performance Diesel) lubricant for diesel
engines. Its advanced composition, with state-of-the-art additives, ensures ideal protection
for all modern TURBO engines at low and high temperatures. It keeps the engine perfectly
clean and protects it against damage. It ensures a significant reduction in fuel and
maintenance costs. It ensures long lubricant oil drain intervals.
It exceeds the following specifications:
MERCEDES BENZ 228.5, ACEA E4-99/3, ACEA E7-04,
API CF, MAN M 3277,MTU TYPE III,VOLVO VDS-3,
SCANIA LDF-2, CUMMINSCES 20072, DAF, RENAULT RXD
Packaging:
1000LT, 180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 900 SAE 10W/40
UHPD TURBO DIESEL
EURO 5 (100% SYNTHETIC)
API CF
ACEA E7-08/2, ACEA E4-08/2
MERCEDES BENZ 228.5, MAN M 3277, MTU TypeIII
CUMMINS CES 20072
VOLVO VDS-3, SCANIA LDF-2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,860
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,00
3. Viscocity index (ASTM D 2270) 178
4. Pour point (ASTM D 97) °C -45
5. Flash point (ASTM D 92) °C 220
16
6.Total number of bases (ASTM D 2896) mg KOH /g 15,40
MEGANOL MODI 850 SAE10W40
A semi-synthetic multigrade lubricant for diesel engines which, thanks to its new
composition, offers unequalled performance and protection. It ensures long oil drain
intervals and has excellent antioxidant, dispersion and cleaning properties.
It exceeds the following specifications:
API CI-4/SL, ACEA E5-02, A3-02 B4-02, Ε7-04
ALLISON C4, DHD-1, MAN M3275, MTU 2,
MB 228.3. MB 229.1, RENAULT RLD, VW 501/505,
VDS-3, MACK EOM.
Packaging:
1000LT, 180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 850 SAE 10W/40
UHPD TURBO DIESEL
EURO 4 (SEMI SYNTHETIC)
API CI - 4/SL, ACEA E7-04, E5-02, A3-02, B4-02,
ALLISON C4, DHD - 1, MAN M3275, MTU 2,
MB 228.3, MB 229.1, RENAULT RLD, VW 501/505,
VDS -3, MACK EO- M PLUS
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,870
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,00
3. Viscocity index (ASTM D 2270) 153
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 10,40
MEGANOL MODI 800 SAE15W40
A semi-synthetic multigrade lubricant for diesel engines which, thanks to its new
composition, offers unequalled performance and protection. It ensures long oil drain
intervals and has excellent antioxidant, dispersion and cleaning properties.
It exceeds the following specifications:
API CI-4/SL, ACEA E5-02, A3-02 B4-02, Ε7-04
17
ALLISON C4,DHD-1,MAN M3275, MTU 2, MB 228.3. MB 229.1
, RENAULT RLD, VW 501/505, VDS-3, MACK EOM.
Packaging:
1000LT, 180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 800 SAE 15W/40
UHPD TURBO DIESEL
EURO 4 (SEMI SYNTHETIC)
API CI - 4/SL, ACEA E7-04, E5-02, A3-02, B4-02,
ALLISON C4, DHD - 1, MAN M3275, MTU 2,
B 228.3, MB 229.1, RENAULT RLD, VW 501/505,
VDS -3, MACK EO - M PLUS
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,870
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,20
3. Viscocity index (ASTM D 2270) 155
4. Pour point (ASTM D 97) °C - 34
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 10,40
MEGANOL MODI 750 SAE15W40
A synthetic-based, multigrade lubricant that is custom made for state-of-the-art, high
performance, catalytic, multi-valve, turbo diesel and petrol engines. It is ideal for engines
used in TAXIS and professional vehicles. It ensures perfect protection under the worst
operating conditions. It performs ideally against oxidation. It helps reduce fuel consumption
and exhaust gas levels. It ensures long lubricant oil drain intervals.
It exceeds the following specifications:
API CF/SL, ACEA A3/B3-04, MERCEDES BENZ 229.1, VW 505.00, ROVER
Packaging:
1000LT, 180KG, 18LT, 4Χ4LT, 16X1LT, 4Χ5LT
PRODUCT: MODΙ 750 SAE 15W/40
(SYNTHETIC BLEND)
18
API CF/SL,
MERCEDES BENZ 229.1, VW 505.00
ROVER
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,878
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,30
3. Viscocity index (ASTM D 2270) 138
4. Pour point (ASTM D 97) °C - 36
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MODI 700 SAE15W40
A multigrade lubricant for European turbo diesel engines used under adverse conditions. It
protects the engine from damages and keeps it clean. It ensures longer lubricant oil drain
intervals.
It exceeds the following specifications:
API CI-4/SL, ACEA E7-04, B4-02, A3-02, MERCEDES BENZ 228.3,
VOLVO VDS-3, MAN M 3275, MACK EO-L
Packaging:
1000LT, 180KG, 25LT, 18LT
PRODUCT: MODΙ 700 SAE 15W/40
API CI- 4/SL, ACEA E7-04, B4-02, A3-02
MERCEDES BENZ 228.3,
VOLVO VDS-3, MAN M 3275,
MACK EO – M PLUS.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,888
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,10
3. Viscocity index (ASTM D 2270) 140
4. Pour point (ASTM D 97) °C - 34
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 10,40
19
MEGANOL MODI 600 SAE15W40
A multigrade SHPD (Super High Performance Diesel) lubricant that is custom made for
new generation TURBO diesel engines used under adverse conditions. It ensures long oil
drain intervals. It has excellent cleaning and dispersion properties that keep the pistons
clean. Moreover, its top antioxidant and antirust properties ensure long oil drain intervals.
It exceeds the following specifications:
API CG-4/SJ, ACEA E4-98/E3-98MB 228.3, MAN M 3275,
VOLVO VDS-2, MACK EO-L, ALLISON C4, MTU (2) TYPE II
Packaging:
1000LT, 180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 600 SAE 15W/40
SHPD TURBO DIESEL
API CG - 4/SJ, ACEA E4-98/E3-98,
A3/B4-04, MERCEDES BENZ 228.3, MAN M 3275,
VOLVO VDS-2, MACK EO-L, ALLISON C4,MTU (2)
TYPE II.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,888
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,40
3. Viscocity index (ASTM D 2270) 140
4. Pour point (ASTM D 97) °C - 34
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 8,70
MEGANOL MODI 500 SAE20W50
A multigrade SHPD (Super High Performance Diesel) lubricant that is custom made for
new generation TURBO diesel engines used under adverse conditions. It ensures long oil
drain intervals. It has excellent cleaning and dispersion properties that keep the pistons
clean. Moreover, its top antioxidant and antirust properties ensure long oil drain intervals.
It exceeds the following specifications:
API CG-4/SJ, ACEA E4-98/E3-98 MB 228.3, MAN M 3275,
VOLVO VDS-2, MACK EO-L, ALLISON C4, MTU (2) TYPE II
20
Packaging:
1000LT, 180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 500 SAE 20W/50
SHPD TURBO DIESEL
API CG- 4/SJ, ACEA E4-98/E3-98,
A3/B4-04, MERCEDES BENZ 228.3, MAN M 3275,
VOLVO VDS-2, MACK EO-L, ALLISON C4,MTU (2)
TYPE II.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,890
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 20,10
3. Viscocity index (ASTM D 2270) 138
4. Pour point (ASTM D 97) °C -30
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 8,70
MEGANOL MODI 400 SAE20W50
A multigrade lubricant that is suitable for both conventional and TURBO diesel engines. Its
excellent cleaning, dispersion, antioxidant and antifriction properties ensure effective
protection for all engine parts.
It is recommended for lubrication purposes in all types of diesel engines, including TURBO
engines used in trucks, loaders, excavators and generators.
It exceeds the following specifications:
API CF-4. CE/SG, ACEA E2-98/B2-98, MB 228.1, MAN 271,
VOLVO VDS, CATERPILLAR TO-2, ALLISON C4, PERKINS, FORD
Packaging:
1000LT, 180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 400 SAE 20W/50
TURBO DIESEL
API CF 4/SG, ACEA E2-98/B2-98,
MERCEDES BENZ 228.1, MAN 271,
21
VOLVO VDS, CATERPILLAR TO-2,
ALLISON C4, PERKINS, FORD.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,890
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 20,10
3. Viscocity index (ASTM D 2270) 133
4. Pour point (ASTM D 97) °C -30
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 7,00
MEGANOL MODI 350 SAE20W50
A multigrade high performance lubricant that is recommended for diesel and petrol engines
used under adverse conditions. It ensures protection against friction, damage as well as
combustion residues.
It exceeds the following specifications:
API CF/SF, CCMC D4/G2
MERCEDES BENZ 277.0, ALLISON C3
Packaging:
1000LT, 180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 350 SAE 20W/50
API CF/ SF, CCMC D4/G2,
MERCEDES BENZ 227.0, ALLISON C3.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,891
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 18,80
3. Viscocity index (ASTM D 2270) 125
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MODI 200A SAE50
A super strong, monograde lubricant in the III Series for older technology diesel engines
(farm tractors).
22
It exceeds the following specifications:
API CF/SF, CCMC D4/G2, CATERPILLAR TO-2
Packaging:
18LT, 4X4LT
PRODUCT: MODΙ 200A SAE 50
API CF/SF, CCMC D4/G2,
CATERPILLAR TO -2, ALLISON C3,
M.B.227.0
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,891
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 18,80
3. Viscocity index (ASTM D 2270) 97
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 235
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MODI 200 SAE40
A super strong, monograde lubricant in the III Series for diesel engines used under the
worst conditions, even for those in which deposit accumulation is frequent or those using
high-sulfur content fuels. This lubricant is made of top quality key mineral oils enriched
with special additives that ensure high cleaning and dispersion levels and make it a perfect
agent against oxidation, corrosion, damage, friction and foaming.
It exceeds the following specifications:
API CF/SF, CCMC D4/G2, CATERPILLAR TO-2, ALLISON C3, M.B. 227.0
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 200 SAE 40
API CF/SF, CCMC D4/G2,
CATERPILLAR TO -2, ALLISON C3,
M.B.227.0
23
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,889
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,20
3. Viscocity index (ASTM D 2270) 98
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MODI 100 SAE30
A super strong, monograde lubricant in the III Series for diesel engines used under the
worst conditions, even for those in which deposit accumulation is frequent or those using
high-sulfur content fuels. This lubricant is made of top quality key mineral oils enriched
with special additives that ensure high cleaning and dispersion levels and make it a perfect
agent against oxidation, corrosion, damage, friction and foaming.
It exceeds the following specifications:
API CF/SF, CCMC D4/G2, CATERPILLAR TO-2, ALLISON C3, M.B. 227.0
Packaging:
1000LT, 180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 100 SAE 30
API CF/SF, CCMC D4/G2,
CATERPILLAR TO -2, ALLISON C3,
M.B.227.0
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 298) Kg / l at 15°C 0,888
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,50
3. Viscocity index (ASTM D 2270) 99
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
MEGANOL MODI 050 SAE10
A super strong, monograde lubricant in the III Series for diesel engines used under the
worst conditions, even for those in which deposit accumulation is frequent or those using
high-sulfur content fuels. This lubricant is made of top quality key mineral oils enriched
24
with special additives that ensure high cleaning and dispersion levels and make it a perfect
agent against oxidation, corrosion, damage, friction and foaming.
It exceeds the following specifications:
API CF/SF, CCMC D4/G2, CATERPILLAR TO-2, ALLISON C3, M.B. 227.0
Packaging:
1000LT, 180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: MODΙ 050 SAE 10W
API CF/SF, CCMC D4/G2,
CATERPILLAR TO -2, ALLISON C3,
M.B.227.0
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,875
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 6,40
3. Viscocity index (ASTM D 2270) 108
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
L U B R I C A N T S F O R F A R M M A C H I N E R Y
A N D T R A C T O R S
MEGANOL MODU 300 SAE15W40
A strong lubricant for farm tractors and machinery. It is suitable for lubricating the engines,
hydraulic systems, gearboxes, differentials and immersed brake systems of farm tractors.
It exceeds the following specifications:
API CF-4/SF, ACEA E2, API GL-4, ZF TE ML O6A & Β &Ο7Β,
FORD M2C 159 B/C, 134 D, MASSEY FERGUSON CMS M 1143, 1144
JOHN DEERE J20C, CASE NEW HOLLAND MAT 3525, 3526.
Packaging:
180KG, 18LT
25
PRODUCT: MODU 300 SAE 15W/40
STOU
API CF-4/SF, ACEA E2, API GL-4
ZF TE ML 06A & B & 07B FORD M2C 159 B/C, 134 D, JOHN DEERE J20C MASSEY FERGUSON CMS M 1143, 1144, 1139
CASE NEW HOLLAND MAT 3525, 3526
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,888 2. Kinematic viscocity (ASTM D 445) cSt at 100°C 15,10 3. Viscocity index (ASTM D 2270) 137 4. Pour point (ASTM D 97) °C -34 5. Flash point (ASTM D 92) °C 220 6. Total number of bases (ASTM D 2896) mg KOH /g 10,50
MEGANOL MODU 200 SAE10W30 T9
A strong lubricant for the transmission systems and hydraulics of farm tractors.
It exceeds the following specifications:
API GL-4 FORD M2C 134D, ZF TE ML O6A, B & O7B
MASSEY-FERGUSON CMS M 1143, 1135
JOHN-DEER J20, CATERPILLAR TO-2.
Packaging:
180KG, 18LT, 4X4LT, 25LT
PRODUCT: MODU 200 SAE 10W/30 T9
API GL-4,
FORD M2C 134D, ZF TE ML O6A, B & O7B
MASSEY- FERGUSON CMS M 1143, 1139
JOHN - DEERE J20C, CATERPILLAR TO-2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,887
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,20
26
3. Viscocity index (ASTM D 2270) 130
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 10,50
MEGANOL MODU 100 SAE20W30 T8
A strong lubricant for the transmission systems and hydraulics of farm tractors.
It exceeds the following specifications:
API GL-4, MASSEY-FERGUSON M 1135
FORD M2C 86B, CATERPILLAR TO-2
Packaging:
180KG, 25LT, 18LT, 4X4LT
PRODUCT: MODU 100 SAE 20W/30 T8
API GL-4,
MASSEY-FERGUSON M 1135
FORD M2C 86B, CATERPILLAR TO-2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,887
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,40
3. Viscocity index (ASTM D 2270) 120
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 6,00
L U B R I C A N T S F O R M O T O R C Y C L E S
MEGANOL MOTO 500 SAE10W40 4T
A semi-synthetic lubricant for four-stroke motorcycles. Thanks to its antifriction
composition, it ensures top-level lubrication and protection. It ensures perfect lubrication at
high rotation levels, high temperature and pressure.
It exceeds the following specifications:
ΑPI SL, JASO MA/MA-2.
27
Packaging:
180KG, 16X1LT, 18LT,
PRODUCT: MOTO 500 SAE 10W/40
SEMI SYNTHETIC
API SL, JASO MA/MA2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,875
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 14,30
3. Viscocity index (ASTM D 2270) 150
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 7,00
MEGANOL MOTO 400 SAE15W50 4T
A semi-synthetic lubricant for four-stroke motorcycles. Thanks to its antifriction
composition, it ensures top-level lubrication and protection. It ensures perfect lubrication at
high rotation levels, high temperature and pressure.
It exceeds the following specifications:
ΑPI SL, JASO MA/MA-2.
Packaging:
180KG, 16X1LT, 18LT,
PRODUCT: MOTO 400 SAE 15W/50
SEMI SYNTHETIC
SL, JASO MA/ MA2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,880
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 19,10
3. Viscocity index (ASTM D 2270) 146
4. Pour point (ASTM D 97) °C -34
28
5. Flash point (ASTM D 92) °C 220
6. Total number of bases (ASTM D 2896) mg KOH /g 7,00
MEGANOL MOTO 300 SAE20W50 4T
A top quality motor oil for four-stroke motorcycle engines that protects the different parts
of the engine against damage, thus extending its lifetime. Suitable for Yamaha, Honda,
Suzuki, BMW and other motorcycles.
It exceeds the following specifications:
ΑPI SL, JASO MA/MA-2.
Packaging:
180KG, 16Χ1LT, 18LT
PRODUCT: MOTO 300 SAE 20W/50
API SL, JASO MA/MA2
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,890 2. Kinematic viscocity (ASTM D 445) cSt at 100°C 19,50 3. Viscocity index (ASTM D 2270) 135 4. Pour point (ASTM D 97) °C -24 5. Flash point (ASTM D 92) °C 225 6. Total number of bases (ASTM D 2896) mg KOH /g 7,00
MEGANOL MOTO 200A 2-STROKE
A 100% synthetic, no-smoke lubricant with a strawberry odor. It is suitable for both racing
and normal riding modes. It creates no combustion residues.
It exceeds the following specifications:
API TC, JASO FC / FD, ISO-L-EGD
Packaging:
180KG, 16Χ1LT, 18LT
29
MEGANOL MOTO 200AS 100% SYNTHETIC
Packaging:
20X1LT (DOSING BOTTLE)
MEGANOL MOTO 200 2-STROKE
A semi-synthetic, no-smoke lubricant. It is suitable for both racing and normal riding
modes. It creates no combustion residues. It emits a strawberry odor.
It exceeds the following specifications:
API TC, JASO FC/FD, ISO-L-EGD
Packaging:
180KG, 16Χ1LT, 18LT
MEGANOL MOTO 200S TEC-SYN
Packaging:
20X1LT (DOSING BOTTLE)
MEGANOL MOTO 100 2-STROKE
A strong, non-prediluted lubricant suitable for two-stroke engines. It protects the pistons
and spark plugs against corrosion. A typical 2-4% ratio is recommended, or you should
follow the manufacturer’s instructions.
It exceeds the following specifications:
API TB, JASO FB.
Packaging:
180KG, 16X1LT, 18LT, 70X200CC
MEGANOL MOTO 100S MIX 2T
Packaging:
20X1LT (DOSING BOTTLE)
30
PRODUCT: MOTO 100 MIX 2T
API TB, JASO FB
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,887
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,30
3. Viscocity index (ASTM D 2270) 99
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 225
6. Total number of bases (ASTM D 2896) mg KOH /g 0,80
L U B R I C A N T S F O R T R A N S M I S S I O N S Y S T E M S
MEGANOL MATO 050 SAE20W/20
A super strong, monograde lubricant in the III Series for diesel engines used under the
worst conditions, even for those in which deposit accumulation is frequent or those using
high-sulfur content fuels. This lubricant is made of top quality key mineral oils enriched
with special additives that ensure high cleaning and dispersion levels and make it a perfect
agent against oxidation, corrosion, damage, friction and foaming.
It exceeds the following specifications:
CATERPILLAR TO-2
Packaging:
4Χ4LT, 18LT
MEGANOL MATO 100Α SAE10
Custom made lubricants for the hydraulic circuits and transmission systems of
CATERPILLAR machinery.
It exceeds the following specifications:
31
CATERPILLAR TO-4, ALLISON C4
Packaging:
180KG, 18LT
PRODUCT: MATO 100A SAE 10W
CATERPILLAR TO-4
ALLISON C4
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,875
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 6,50
3. Viscocity index (ASTM D 2270) 108
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 215
MEGANOL MATO 100B SAE30
Custom made lubricants for the hydraulic circuits and transmission systems of
CATERPILLAR machinery.
It exceeds the following specifications:
CATERPILLAR TO-4, ALLISON C4
Packaging:
180KG, 18LT
PRODUCT: MATO 100B SAE 30
CATERPILLAR TO-4
ALLISON C4
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,887
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,60
3. Viscocity index (ASTM D 2270) 99
4. Pour point (ASTM D 97) °C -34
32
5. Flash point (ASTM D 92) °C 225
MEGANOL MATO 100C SAE50
Custom made lubricants for the hydraulic circuits and transmission systems of
CATERPILLAR machinery.
It exceeds the following specifications:
CATERPILLAR TO-4, ALLISON C4
Packaging:
180KG, 18LT
PRODUCT: MATO 100C SAE 50
CATERPILLAR TO-4
ALLISON C4
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,890
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 18,70
3. Viscocity index (ASTM D 2270) 98
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
L U B R I C A N T S F O R D I F F E R E N T I A L S
- G E A R O I L S
MEGANOL MOVA 800 SAE75W90
A special 100% synthetic multigrade gear oil for all gearboxes. API GL-5 meets
manufacturer specifications.
It exceeds the following specifications:
VW 501.50, SUZUKI, BMW, MERCEDES,
VOLVO, PORSCHE, HYUNDAI, MAZDA, etc.
33
Packaging:
180KG, 18LT, 16X1LT, 25LT
PRODUCT: MOVA 800 SAE 75W/90
100% SYNTHETIC
API GL-5,
VW 501.50, SUZUKI, BMW, MERCEDES, VOLVO,
PORSCHE, HYUNDAI, MAZDA
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,880
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 16,60
3. Viscocity index (ASTM D 2270) 180
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
MEGANOL MOVA 700B SAE75W80
A special semi-synthetic gear oil for PEUGEOT, CITROEN and other vehicles.
It exceeds the following specifications:
API GL-5, MIL-L- 2105 D.
Packaging:
180KG, 18LT, 16X1LT, 25LT, 4X4LT
PRODUCT: MOVA 700B SAE 75W/80
SEMI SYNTHETIC
API GL-5, MIL - L - 2105 D
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,879
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 11,20
3. Viscocity index (ASTM D 2270) 150
34
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
MEGANOL MOVA 700A SAE75W90
A special semi-synthetic gear oil for PEUGEOT, CITROEN and other vehicles.
It exceeds the following specifications:
API GL-5, MIL-L- 2105 D.
Packaging:
180KG, 18LT, 16X1LT, 25LT, 4X4LT
PRODUCT: MOVA 700A SAE 75W/90
SEMI SYNTHETIC
API GL-5, MIL - L - 2105 D
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,882
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 16,50
3. Viscocity index (ASTM D 2270) 160
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 220
MEGANOL MOVA 600 SAE85W140
A multigrade, top quality, gear oil that is ultra fortified with high pressure additives. It is
recommended for hypoid differentials used under exceptionally high loading conditions.
It exceeds the following specifications:
API GL-5, MIL -L-2105 D.
Packaging:
180KG, 18LT, 16X1LT, 25LT, 4X4LT
PRODUCT: MOVA 600 SAE 85W/140
35
API GL-5, MIL - L - 2105 D
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,910
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 27,30
3. Viscocity index (ASTM D 2270) 97
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 240
MEGANOL MOVA 550LS SAE85W90
Special gear oil for differential locks, with high pressure additives. For high resistance to
loading and high sliding rates, as well as stability under high temperatures. It is suitable for
off-road (4X4) vehicles.
It exceeds the following specifications:
API GL-5,MIL-L-2105D,ZF TE-ML-05C, 12C,16E
Packaging:
18LT, 4X4LT, 16X1LT,
MEGANOL MOVA 500 SAE80W90
A multigrade, top quality, gear oil that is ultra fortified with high pressure additives. It is
recommended for hypoid differentials used under exceptionally high loading conditions.
It exceeds the following specifications:
API GL-5, MIL-L-2105 D
Packaging:
180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MOVA 500 SAE 80W/90
API GL-5, MIL - L - 2105 D
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
36
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,900
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 16,70
3. Viscocity index (ASTM D 2270) 98
4. Pour point (ASTM D 97) °C -30
5. Flash point (ASTM D 92) °C 235
MEGANOL MOVA 400 SAE140
Gear oil fortified with high pressure additives, which is suitable for the lubrication of
gearboxes and differentials. It ensures excellent protection against damage.
It exceeds the following specifications:
API GL-4, MIL-L-2105
Packaging:
180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MOVA 400 SAE 140
API GL- 4, MIL - L-2105
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,910
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 27,00
3. Viscocity index (ASTM D 2270) 97
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 240
MEGANOL MOVA 300B SAE80
Gear oil fortified with high pressure additives, which is suitable for the lubrication of
gearboxes and differentials. It ensures excellent protection against damage.
It exceeds the following specifications:
API GL-4, MIL-L-2105
Packaging:
180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MOVA 300B SAE 80
37
API GL- 4, MIL - L- 2105
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,887
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,60
3. Viscocity index (ASTM D 2270) 99
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
MEGANOL MOVA 300A SAE90
Gear oil fortified with high pressure additives, which is suitable for the lubrication of
gearboxes and differentials. It ensures excellent protection against damage.
It exceeds the following specifications:
API GL-4, MIL-L-2105
Packaging:
180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MOVA 300A SAE 90
API GL- 4, MIL -L -2105
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,890
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 16,50
3. Viscocity index (ASTM D 2270) 98
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 235
MEGANOL MOVA 200A SAE250
It is suitable for the lubrication of gears used under average loading conditions. It protects
gears against damage and corrosion.
It exceeds the following specification:
38
API GL-1
Packaging:
4X4LT, 16X1LT
MEGANOL MOVA 200 SAE140
It is suitable for the lubrication of gears used under average loading conditions. It protects
gears against damage and corrosion.
It exceeds the following specification:
API GL-1
Packaging:
180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MOVA 200 SAE 140
API GL-1
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,910
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 26,50
3. Viscocity index (ASTM D 2270) 97
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 240
MEGANOL MOVA 100B SAE80
It is suitable for the lubrication of gears used under average loading conditions. It protects
gears against damage and corrosion.
It exceeds the following specification:
API GL-1
Packaging:
180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MOVA 100B SAE 80
API GL-1
39
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,887
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,40
3. Viscocity index (ASTM D 2270) 99
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
6. Total number of bases
MEGANOL MOVA 100A SAE90
It is suitable for the lubrication of gears used under average loading conditions. It protects
gears against damage and corrosion.
It exceeds the following specification:
API GL-1
Packaging:
180KG, 25LT, 18LT, 4X4LT, 16X1LT
PRODUCT: MOVA 100A SAE 90
API GL-1
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,890
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 16,30
3. Viscocity index (ASTM D 2270) 98
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 235
AUTOM ATIC GE ARBOX AND POWER ASSISTED
STEERING FLUIDS
MEGANOL MATI 300 A.T.F. DX III
A state-of-the-art lubricant for gearboxes and steering systems, with a high viscosity index.
It is suitable for all modern passenger cars, trucks and earthwork machinery.
40
It exceeds the following specifications:
DEXRON-III, ALLISON C-4, ZF TE-ML-14,
MERCEDES BENZ 236.9
Packaging:
180KG, 18LT, 16X1LT
PRODUCT: ΜATI 300 A.T.F DEXRON - III
GENERAL MOTORS, DEXRON – III,
ALLISON C-4, ZF TE- ML -14
MERCEDES BENZ 236.9
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 298) Kg / l at 15°C 0,870
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 8,10
3. Viscocity index (ASTM D 2270) 180
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 215
MEGANOL MATI 200 A.T.F. DX II
A strong lubricant for automatic gearboxes, with excellent antioxidant, anticorrosion,
antifriction properties under high temperature and loading conditions in particular. It is
suitable for all cars, trucks and earthwork machinery.
It exceeds the following specifications:
DEXRON-II, ALLISON C4,
M.B. 236.7, ZF TE-ML-09, 11, 14 MAN 339-D
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: ΜATI 200 A.T.F DEXRON - II
ALLICON C4, M.B. 236.7, ZF TE- ML -09, 11, 14
MAN 339-D
41
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,875
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 9,50
3. Viscocity index (ASTM D 2270) 170
4. Pour point (ASTM D 97) °C -40
5. Flash point (ASTM D 92) °C 215
MEGANOL MATI 100 A.T.F. TYPE A
A top quality lubricant for automatic gearboxes, torque converters and power assisted
steering systems.
It exceeds the following specifications:
GENERAL MOTORS TYPE A, SUFFIX – A.
Packaging:
180KG, 18LT, 4X4LT, 16X1LT
PRODUCT: ΜATI 100 A.T.F TYPE - A
GENERAL MOTORS TYPE A, SUFFIX - A
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,875
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 7,50
3. Viscocity index (ASTM D 2270) 130
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 215
L U B R I C A N T S F O R H Y D R A U L I C
S Y S T E M S
MEGANOL YDRA 500 ISO-32, 46, 68 ISO-100 ISO -
150
42
A zinc-free lubricant with a high viscosity index (VI=150) for functioning under a wide
range of temperature. It has excellent antifriction properties, resistance to very high loading
conditions and excellent filter permeability.
It exceeds the following specifications:
DIN 51524 PART-III HVLP
Packaging:
180KG
MEGANOL YDRA 400 ISO-32, 46, 68 ISO-100 ISO-
150 ISO-220
A special strong lubricant for hydraulic systems with excellent antifriction properties,
resistance to high loading conditions and excellent filter permeability. It is zinc-free.
It exceeds the following specifications:
DIN 51524 PART-III, HLP.
Packaging:
180KG
MEGANOL YDRA 300 ISO-32, 46, 68
A custom made hydraulic system lubricant with a high viscosity index (VI=155) and
perfect shear stability for POCLAIN machinery.
It exceeds the following specifications:
DIN 51524 HVLP, PART-III.
Packaging:
180KG, 18LT
PRODUCT: YDRA 300B ISO 46 (POCLAIN)
DIN 51524 PART - III, HVLP
43
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,873
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 8,10
3. Viscocity index (ASTM D 2270) 150
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 220
PRODUCT: YDRA 300C ISO 68 (POCLAIN)
DIN 51524 PART - III, HVLP
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,876
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,80
3. Viscocity index (ASTM D 2270) 150
4. Pour point (ASTM D 97) °C -34
5. Flash point (ASTM D 92) °C 220
MEGANOL YDRA 200 ISO-32, 46, 68 ISO-100
An excellent strong lubricant for hydraulic and circulation systems, with special high
pressure and fluidity additives.
It exceeds the following specifications:
DIN 51524 HLP PART-III,
CETOP RP 91 H HM, VICKERS I – 286 – S / M -2950 –S.
Packaging:
180KG, 18LT
MEGANOL YDRA 100 ISO-32, 46, 68 ISO-100
A top quality mineral oil for hydraulic systems. It ensures protection against damage under
high pressure and speed. It keeps the pump system clean and protects it against corrosion. It
is recommended for hydraulic elevator presses, engine parts and coal mine devices.
It exceeds the following specifications:
DIN 51524 HLP PART-II, AFNOR NFE 48-603 (HM, HY), DINISON HF-O.
Packaging:
44
1000LT, 180KG, 25LT, 18LT, 16LT, 4X4LT
PRODUCT: YDRA 100A ISO 32
DIN 51524 HLP PART - II,
AFNOR NFE 48-603 (HM, HY),
DENISON HF-O.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,872
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 5.20
3. Viscocity index (ASTM D 2270) 100
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 215
PRODUCT: YDRA 100B ISO 46
DIN 51524 HLP PART - II,
AFNOR NFE 48-603 (HM, HY),
DENISON HF-O.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,875
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 6,7
3. Viscocity index (ASTM D 2270) 100
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 215
PRODUCT: YDRA 100C ISO 68
DIN 51524 HLP PART - II,
AFNOR NFE 48-603 (HM, HY),
DENISON HF-O.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,880
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 8,7
3. Viscocity index (ASTM D 2270) 100
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 220
45
PRODUCT: YDRA 100D ISO 100
DIN 51524 HLP PART - II,
AFNOR NFE 48-603 (HM, HY),
DENISON HF-O.
PHYSICAL AND CHEMICAL CHARACTERISTICS OF THE FINISHED
PRODUCT
1. Specific weight (ASTM D 1298) Kg / l at 15°C 0,882
2. Kinematic viscocity (ASTM D 445) cSt at 100°C 10,50
3. Viscocity index (ASTM D 2270) 100
4. Pour point (ASTM D 97) °C -24
5. Flash point (ASTM D 92) °C 230
46
I N D U S T R I A L L U B R I C A N T S F O R E N C A S E D
G E A R B O X E S ( G E A R R E D U C E R S )
MEGANOL MABI 300 ISO-680, 1000
A top quality lubricant for industrial gears under heavy-duty operating conditions. It
ensures increased protection against gear damage caused by high load transmission.
It exceeds the following specifications:
DIN 51517 CLP PART-III U.S. STEEL 224, AGMA 250.04
Packaging:
180KG, 18LT
MEGANOL MABI 200 ISO-220 ISO-320 ISO-460
A top quality lubricant for industrial gears under heavy-duty operating conditions. It
ensures increased protection against gear damage caused by high load transmission.
It exceeds the following specifications:
DIN 51517 CLP PART-III U.S. STEEL 224, AGMA 250.04
Packaging:
180KG, 18LT,
MEGANOL MABI 100 ISO-68, 100 ISO-150
A top quality lubricant for industrial gears under heavy-duty operating conditions. It
ensures increased protection against gear damage caused by high load transmission.
It exceeds the following specifications:
DIN 51517 CLP PART-III
U.S. STEEL 224, AGMA 250.04
Packaging:
180KG, 18LT, 180KG, 18LT
47
L U B R I C A N T S F O R A I R C O M P R E S S O R S
MEGANOL MARA 200 ISO-150 ISO-220
An air compressor lubricant that is custom made from basic mineral oils and well-chosen
additives. They are highly resistant to oxidation and prevent deposit accumulation on output
valves. They specifically designed for the lubrication of reciprocating and rotary air
compressors.
It exceeds the following specification:
DIN 51506 VDL.
Packaging:
180KG, 18LT
MEGANOL MARA 100 ISO-32, 46, 68,100
An air compressor lubricant that is custom made from basic mineral oils and well-chosen
additives. They are highly resistant to oxidation and prevent deposit accumulation on
output valves. They specifically designed for the lubrication of reciprocating and rotary air
compressors.
It exceeds the following specification:
DIN 51506 VDL
Packaging:
180KG, 18LT
48
L U B R I C A N T S F O R P N E U M A T I C T O O L S
MEGANOL MERA 100 ISO-32, 68, 100
A strong lubricant with antioxidant properties for pneumatic drills and other pneumatic
devices operating under very high pressure conditions.
Packaging:
180KG, 18LT
L U B R I C A N T S F O R H E A T
T R A N S M I S S I O N S Y S T E M S
MEGANOL CALO 100
A lubricant with special antioxidant additives. It is used in closed heat transmission systems
operating under temperatures of up to 320οC.
Packaging:
180KG, 18LT
L U B R I C A N T S F O R W I R E R O R E S
MEGANOL SYRM 100
A special lubricant with additives intended to keep the lubricant on the lubricated surface. It
is used for the lubrication of wire ropes, chains and guides.
Packaging:
180KG
LUBRICANTS FOR METAL CUTTING AND PROCESSING DEVICES
49
MEGANOL CUTI 200
A state-of-the-art synthetic lubricant with anti-foaming, antifriction and antibacterial
properties.
Packaging:
180KG, 18LT
MEGANOL CUTI 100
Top quality emulsified mineral oil fortified with antibacterial and anticorrosion additives. It
is suitable for processing ferrous and non-ferrous metals. It is used with water at a ratio of
1:20.
Packaging:
180KG, 18LT, 4X4LT
L U B R I C A N T S F O R M A R I N E O U T B O A R D M O T O R S
MEGANOL BORO 100
A high performance lubricant for two-stroke outboard motors of all types.
It exceeds the following specifications:
NMMA (BIA) TC-W3
Packaging:
180KG, 18LT, 16X1LT
MEGANOL BORO 100S
Packaging:
20X1LT (DOSING BOTTLE)
L U B R I C A N T S F O R M A R I N E M O T O R S
50
MEGANOL MARI 700 -70 SAE50
A mineral oil with a very good alkalinity index that is suitable for the lubrication of state-
of-the-art, high performance and high-load cross head engines used on ships, operating on
high-sulfur content fuel (TBN= 70).
Packaging:
180KG
MEGANOL MARI 600 -40 SAE40
A lubricant that is suitable for the lubrication of cylinders and medium speed marine motors
used under heavy duty conditions, operating on high-sulfur content fuel (ΤΒΝ = 40).
It exceeds the following specifications:
CATERPILLAR (ENGINES IN THE SERIES 3600),
PIELSTICK (ENGINE PC 2.6)
Packaging:
180KG
MEGANOL MARI 500 -30 SAE 40
A mineral oil with a high alkalinity index, which is recommended for the lubrication of
cylinders and medium and high speed diesel engines operating on heavy, high sulfur
content fuel (ΤΒΝ=30).
It exceeds the following specifications:
CATERPILLAR (ENGINES IN THE SERIES 3600)
Packaging:
180KG
MEGANOL MARI 400 -30 SAE 3
A mineral oil with a high alkalinity index, which are recommended for the lubrication of
cylinders and medium and high speed diesel engines operating on heavy, high sulfur
content fuel (ΤΒΝ=30).
It exceeds the following specifications:
CATERPILLAR (ENGINES IN THE SERIES 3600)
51
Packaging:
180KG
MEGANOL MARI 300 -12 SAE 500
A lubricant made from basic materials of a high viscosity index and additives that ensure
alkalinity, cleaning, as well as antifoaming and antioxidant properties. It is recommended
for the lubrication of cylinders and medium and high speed diesel engines operating on fuel
with a sulfur content of up to 2%.
It exceeds the following specifications:
API CD, CATERPILLAR, etc.
Packaging:
180KG, 18LT
MEGANOL MARI 200 -12 SAE 40
A lubricant made from basic materials of a high viscosity index and additives that ensure
alkalinity, cleaning, as well as antifoaming and antioxidant properties. It is recommended
for the lubrication of cylinders and medium and high speed diesel engines operating on fuel
with a sulfur content of up to 2%.
It exceeds the following specifications:
API CD, CATERPILLAR, etc.
Packaging:
180KG, 18LT
MEGANOL MARI 100 -12 SAE 30
A lubricant made from basic materials of a high viscosity index and additives that ensure
alkalinity, cleaning, as well as antifoaming and antioxidant properties. It is recommended
for the lubrication of cylinders and medium and high speed diesel engines operating on fuel
with a sulfur content of up to 2%.
It exceeds the following specifications:
API CD, CATERPILLAR, etc.
Packaging:
52
180KG, 18LT
L U B R I C A N T S F O R C H A I N S A W S
MEGANΟL ALIS 300 CHAINSAW OIL
A special adhesive lubricant for chainsaws of all types. It reduces damage to the
minimum possible extent, thus extending the lifetime of the chain. It ensures lower
consumption levels due to its adhesive properties. It prevents spraying. It can be used all
year round.
Packaging:
15LT, 16X1LT, 4X4LT
A L L P U R P O S E L U B R I C A N T S
MEGANΟL PREM 100 SAE10 (ISO32), SAE30 (ISO
68)
Monograde lubricants that are suitable for tool lubrication, where a pure, additive-free
mineral oil is necessary.
Packaging:
1000LT, 180KG, 15LT, 4X4LT, 16X1LT,
G R E A S E S
MEGANOL GREA 500 NLGI/00, EP
A gearbox grease with high pressure additives and high resistance to humidity. It is suitable
for self-greasing vehicles.
Packaging:
180KG, 16KG, 4KG
MEGANOL GREA 400 MoS2
53
Grease that contains graphite and molybdenum disulphide (ΜoS2) with antirust and
anticorrosion additives. It is highly resistant to rinsing. It is suitable for heavy-duty
applications.
Packaging:
180KG, 16KG, 4KG, 24X900GR
MEGANOL GREA 350 NLGI / 2
A lithium (Li) based grease, which is fortified with special additives to withstand high
pressure. It is highly resistant to rinsing and is suitable for application in roller bearings,
sleeve bearings in cars and heavy-duty industrial purposes.
Operating temperatures: -30οC to + 130
οC.
Packaging:
4KG, 24X900GR
MEGANOL GREA 300 NLGI / 3
A lithium (Li) based grease that is highly resistant and chemically stable and ensures
antirust and anticorrosion protection.
Operating temperatures: -30οC to + 130
οC.
Packaging:
180KG, 16KG, 4KG, 24X900GR
MEGANOL GREA 200 NLGI /1.2
A lithium (Li) based grease that is highly resistant and chemically stable and ensures
antirust and anticorrosion protection.
Operating temperatures: -30οC to + 130
οC.
Packaging:
180KG, 6KG, 50KG, 4KG, 24X900GR
MEGANOL GREA 100 NLGI- 2, 3
54
A calcium (Ca) based all-purpose, with a fibrous texture. It is resistant to humidity and has
very good properties. It is suitable for lubrication applications on vehicles frames.
Operating temperatures: -10οC to + 85
οC.
Packaging:
180KG, 50KG, 16ΚG, 4ΚG, 24X900GR
55
G E N E R A L C O M M E N T S
1. THIS LIST INCLUDES SPECIAL PURPOSE PRODUCTS WHICH ARE
AVAILABLE UPON ORDER
2. SAFETY DATA SHEETS ARE PROVIDED TO PROFESSIONALS UPON
REQUEST TEL.: +30 26410-55140, +30 26414-00805, +30 26410-31370. FAX:
+30 26410-55140
MEGANOL LUBRICANTS MOUSAKIAN KYRIAKOS & CO OEE
KRYSTALLI ST. & DRAGATSANIOU ST.
GR 30100 AGRINIO
TEL.: +30 26410-31370,FAX:+30 26410-55140
E-MAIL:info@mousakian.gr
www.mousakian.gr
www.meganol.gr
Recommended