View
222
Download
12
Category
Preview:
DESCRIPTION
Proses Fabrikasi Bejana Tekan Fabrication of pressure vessel
Citation preview
PRESSURE VESSEL:
Perancangan, Fabrikasi
dan Inspeksi
Ir. Tri Prakosa, M.Eng.
LAPI-ITB (22-25 Oktober 2009)
*
3. FABRIKASI
*
URUTAN FABRIKASI
*
http://www.jsw.co.jp/en/product/material/vessel/image/fabricationSequence.gif
Peleburan Baja (Steel Melting)
*
Tempa (Forging)
*
Plate Rolling
*
http://www.tfes.com/pressureVessel02.htm
Head Manufacture
*
Perlakuan Panas
(Heat Treatment)
*
Heat Treatment
*
Heat treatment allows special metallurgies to be quench and tempered. The large stress relief oven gives in-house post weld heat treat.
http://www.tfes.com/pressureVessel04.htm
Pemesinan (Machining)
*
Pengapalan (Shipping)
*
R & D Japan Steel Workss
*
Pengalaman Fabrikasi JSW
*
Fabrication
*
Long seams, girth seams, and nozzle welds (shown here) are done by any one of the following procedures: SAW, SMAW, GTAW, GMAW, FCAW. All Taylor Forge welders are ASME Code Section IX qualified.
After the plate is formed into cylinders, many welding processes are used to fabricate the rest of the vessel. Here a submerged arc procedure is used for a longitudinal seam.
The strip overlay process is used on heavy wall
vessels like reactors, requiring alloy internal surfaces. The strip
overlay method is a submerged arc process, resulting in controlled
chemistry and a high
integrity bond.
http://www.tfes.com/pressureVessel03.htm
Recommended