View
232
Download
0
Category
Preview:
Citation preview
8/8/2019 AKSESOUAR - EXTRA XEIRISTIRIA
1/4
Parts Information
New ordering system for Selective Control Valves (SCV)
To simplify the ordering of SCV (M-SCV and E-SCV) kits for field installation, John Deere nowoffers a new combination of the parts to be ordered.
Following you will find the effected changes in more details:
One part number includes all needed SCV parts
One part number for the needed control parts according to the SCV mounting position
Only for first installation of M-SCV Series 300/301 or E-SCV on position III or IV, an endcover has to be ordered in addition.
SCV CouplerDust
CoverMounting
partsControlparts End Cover
Only needed21
3
1
2
3
8/8/2019 AKSESOUAR - EXTRA XEIRISTIRIA
2/4
Benefits of the new SCV ordering system
Easy to order due to a clearly laid out matrix
Less parts to be ordered additionally - at most 3 diverse part numbers
Less kits in total simplify the system and reduce the inventories - high flexibility
Please find on the following pages the overview of the SCV kits needed for field installation on6020 and 6000/6010 Series tractors. Benefit from a simpler ordering system and an excellentoverview!
For easy M-SCV identification, please note the below information:
M-SCV Identification
Series 100 or 101 (Standard)
Mechanically actuated, with fixed cap
Field installation kits include ISO-Standardquick couplers and dust protection housing
Series 200 or 201 (DeLuxe)
Mechanically actuated, with two operating positions
Field installation kits include ISO-DeLuxequick couplers and dust protection housing
Series 300 or 301 (Super DeLuxe)
Mechanically actuated, with three operating positions
Field installation kits include ISO-DeLuxequick couplers and dust protection housing
8/8/2019 AKSESOUAR - EXTRA XEIRISTIRIA
3/4
M-SCV-Mounting Position on 6000, 6010, 6020 series tractors with corresponding control parts
Position I Position II Position III Position IVRH
End cover
RH
New M-SCV field installation kits for6000, 6010 and 6020 Series tractors withcorresponding SCV Series
AL169860 AL169859
Remark:kit includes as well
hydraulic oilreservoir
PriorityValve &
Hitch Valve
AL169861
Remark:kit includes as well
spacer housing
AL169862
Remark:not for tractorswith AutoPowr
AL169957
AL169787for tractors with
axial piston pump
Series100
AL169860 (A)+ AL169787
AL169859 (B)1)
+ AL169787
AL169861 (C)+ AL169787
AL1698622) 4)
+ AL169787Not required
AL169788for tractors with hydr.
gear-type pump
Series101
AL169860 (A)
+ AL169788
AL169859 (B)1)
+ AL169788
AL169861 (C)
+ AL169788
AL1698622) 4)
+ AL169788
Not required
AL169789for tractors with
axial piston pump
Series200
AL169860 (A)+ AL169789
AL169859 (B)1)
+ AL169789
AL169861 (C)+ AL169789
AL1698622) 4)
+ AL169789Not required
AL169790for tractors with hydr.
gear-type pump
Series201
AL169860 (A)+ AL169790
AL169859 (B)1)
+ AL169790
AL169861 (C)+ AL169790
AL1698622) 4)
+ AL169790
Not required
AL169791for tractors with
axial piston pump
Series300
AL169860 (A)+ AL169791
AL169859 (B)1)
+ AL169791
AL169861 (C)+ AL169791
AL1698622) 4)
+ AL169791
AL1699573)
AL169792for tractors with hydr.
gear-type pump
Series301
AL169860 (A)+ AL169792
AL169859 (B)1)
+ AL169792
AL169861 (C)+ AL169792
AL1698622)
4)
+ AL169792
AL1699573)
1)If a M-SCV is installed on the tractor for the first time, please order M-SCV kit and control parts for position II.
2)With AutoQuad and PowrQuad Plus transmission please order in addition range-shift lever AL153498 (up to tractor serial no. 398655).
3)Only required if M-SCV Serie 300/301 is installed on the tractor on position III or IV for the first time.
4)Control parts required for 6000, 6010 and 6020 series tractors from serial no. 184327. For 6000 series 6-cyl. tractor models with left hand reverser up to tractor serial no. 184326,
please order instead control parts AL81992 and 3 x 42M7054 stud.
1
2 3Overview of M-SCV field installation kits for 6000, 6010 and 6020 Series tractors
8/8/2019 AKSESOUAR - EXTRA XEIRISTIRIA
4/4
E-SCV-Mounting Position on 6020 series tractors including corresponding control parts
Position III Position IV RH End cover
New E-SCV field installation kitfor 6020 Series tractors
Position I Position II
Priority Valve& Hitch Valve
E-SCV kit already includescontrol parts E-SCV kit already includescontrol parts
RH
AL169971for Premium Plus
tractorsE-SCV
Notavailable
Notavailable
AL169971
Remark:
If no spacer has yet beeninstalled, please order
in addition fromtractor serial no. 398656:
AL161388
AL169971
AL169957
Only required ifE-SCV is
installed on thetractor on
position III or IVfor the first time.
E-SCV field installation kit for 6020 Series tractors
2 3
1
Recommended