View
4
Download
0
Category
Preview:
Citation preview
Smarter decisions, better products.
www.bogaziciyazilim.com
NX 11 CAD Yenilikleri
Page 2 Siemens PLM Software www.bogaziciyazilim.com
Gündem
9:30 – 11:00 "NX 11 ile ürün tasarımlarınıza hız katın"
11:00 – 11:15 Kahve Molası
11:15 – 12:30 NX 11 ile ürün tasarımlarınıza hız katın"
12:30 - 13:30 Öğle Yemeği
13:30 – 15:00 "İmalat için NX CAM"
15:00 – 15:15 Kahve molası
15:15 – 16:45 "Simulasyon için Simcenter & Simcenter 3D"
.
Page 3 Siemens PLM Software www.bogaziciyazilim.com
CAD Konuları
9:30
Arayüz Tanıtımı
Convergent Modeling
Modeling Yenilikleri
Point Cloud
Assembly
11:00
Ara
11:15
Iray+ Rendering
Realize Shape
Drafting – PMI
Topology Optimization
3D Printing - Additive Manufacturing
12:30
Page 4 Siemens PLM Software www.bogaziciyazilim.com
NX – Zaman İçinde Gelişimi
Knowledge Fusion
Design Logic
Direct Modeling
New UI
Active Mockup
Synchronous Technology
Product Template Studio
HD3D
Active Workspace Client
4th Generation Design, 4GD
Synchronous Technology 2D
Realize Shape
Convergent Modeling
Iray+ rendering
Revolutionize Sketch
Assembly performance innovation
Page 5 Siemens PLM Software www.bogaziciyazilim.com
NX 11’de Gelen Yenilikler
Convergent Modeling
Massive point cloud
Drawings to PMI
Facet Precise Combined
Advanced Sheet Metal
3D Printing
Flattening & Forming
Realism with real-
time rendering
Iray+ Swept Volume
Page 6 Siemens PLM Software www.bogaziciyazilim.com
NX 11 ile Gelen Yeniliklerin Tümü
Modeling Feature replay performance improvements
Part Modeling version up improvements
Feature algorithm update controls
Edge Blend improvements
Face Blend improvements
Part Modules - Usability & Performance
Interrupt feature
Sketch - Usability Improvements
Sketch – Performance improvements
Sketch – Scale constraint
ST2D- Local Scale
ST2D - Rigid Sets
Sketch - Constraint to string of curves
Sketch - Splines improvements
Sketch - Notes within feature
Sketch - Display dependencies to external geometry
Sketch - Position and reattach improvements
Sketch - Horizontal and Vertical constraints of points and endpoints of lines
Synchronous Modeling - Delete Face supports multi body output
Synchronous Modeling - Replace face at laminar sheet boundary
Synchronous Modeling - Delete Notch/Cliff blends
Synchronous Modeling - Optimize Face Selection improvement
Selection - Select from navigator consistency
Design Templates - Relinking a product interface
Design Templates - Product interface expressions
Design Templates - WAVE link out of date status improvements
SDPD: Modular Interface Design
Variational Sweep improvements
Feature Modeling Swept Volume
Wireframe - Spine Curve feature
Wireframe - Scale Curve feature
Wireframe - Isocline curve feature UI & Selection Intent
Surfacing - Variable offset surface (Tailored blanks)
Surfacing - Flattening and Forming
Surfacing - Studio Surface improvements
Surfacing - Section Surface accuracy
Wireframe - Derived curves improvements
Realize Shape - Connect
Realize Shape - Polish
Analysis - Multi-Face Continuity
Mixed NURBS/Facet modeling
Analysis - AO Performance improvements
Analysis - AO Usability improvements
Analysis – AOs in Assembly Context
Label and Tip Improvements
Boolean Robustness, Performance and Diagnostics
Version Up Reliability - data versioning
Performance Improvements
Feature update
Interaction Performance
Make Current Feature
Extract and Product Interface
Non-Associative Objects Folder in PN Timestamp View
Selection Intent in Datums and Curves
Selection Intent Body Collector
Associative SI in Face Blend
Point Display Clarity
Trim Curve Improvements
Offset Curve in Face Improvements
Sketch Usability of References and Points
Sketch Recipe Curve SI, diagnostics, and reparenting
Synchronous 2D - Improved Rigid Sets
Edge and Face Blend Improvements
Flow Blend Improvements
Draft and Draft Body - usability/diagnostics/robustness
Group Face Enhancements
Part Navigator Workflow Enhancements
User Experience Multi-Core extension
Cloud Licensing Support
Simple Part File Password
Support for Multiple Managed NX Configurations
STEP 242 Adapter Support
Close Subassembly Performance
Improve Units Handling
High End Rendering Engine
Multiple Displayed Parts Investigation
Multi-Core Lightweight Drawing View Completion
Support Remote Display
Support for New Direct Model Version
NX Open Selection Support
Navigator Selection Performance
Circle Selection Method
Selection Tune Up
Convergent Modeling PSM Display Support
Point Cloud - Architecture Support
Plot Support for Colored Drawing Symbols
NX Open Toolkits Upgrades
NX Open Usability
Python UDO Support
NX Open Partner Support
NX Open Support for Spreadsheet Interaction
Timeline Tool
Information Window
Navigator Drag and Drop
Improved Window Management
Automatic Application Change
Upgrade QT
Wide Dialogs with NX Open
ITI Support in UFWrapper for .Net
Graphics and Selection usability enhancements
Python autotest
DEAP: Navigator Framework enhancements
Table support for change management
UI Tools usability enhancements
Permanent display of the Zoom /Scale factor
View Normal to a non planar face
Changeable setting for section plane orientation
Additional option: white background
API for render solids using stored facets
All selection candidates in QuickPick when over handles
Business Intelligence
Isolate in new window
Assemblies 4GD Weld Support (NX 10.0.2)
4GD Constraints (Phase 2)
4GD Support for Change Management
4GD Support for Parts List
Direct Model Integration
Large Assembly Performance
Motion Consolidation Architecture
Component Patterns with Pure Reference Patterns
Support for Multiple Displayed Parts Investigation
Associative References to Multi-CAD Override Geometry
Support for Mixed/Facet Modeling Initiative
Part Information Access in NX
Reference Sets – Enhancements
Drafting & PMI Multi-thread support for Smart Lightweight views
Working with arrangements on drawings
View Break workflows
Settings Enhancements
Track Drawing Changes Enhancements
Drawing Compare
Dimension UI Enhancements
Hole Callout enhancements
Dimension Settings
Limits and Fits
Support for Angular Directed Dimensions
4GD-Parts List Support
4GD-Relations and Where-Used
4GD-View of Part Support
NX Layout-enhanced workflows
NX Layout-leveraging legacy data
2D Drawing to 3D PMI
Part Navigator Performance Improvement
PMI Inherit Enhancements
Support for Angular Directed Dimensions
PMI Lightweight Section View Enhancements
PMI Region Enhancements
PMI Resize Enhancements
PMI display parallel to screen
Dimension UI Enhancements
Hole Callout enhancements
Dimension Settings
Limits and Fits
Support for Angular Directed Dimensions
Selection for Routing Anchor Points
Crosshatch for Drafting Section View
Part Master Metadata Support
FCF Standards – Highlight
PMI Parallel to Screen
PMI Section Cut – Objects
PMI WAVE Workflow
Auto Expand for Part Navigator
Rotation Symbol Option
Orient a View
Enhanced Title bar for Setting dialogs
Navigate to View
Aligned To Plane Inherit PMI Dimension
Retained PMI Display
Inherit PMI Custom Symbol
Detail View Node Enhancement
Detail View Boundary Enhancement
Navigate to Model View
Label for Rectangle Boundary Detail View
View Clipping
Center Mark - Define Angle
Auto Intersection Point for Dimensions
Limits and Fits on Scene Dialog
Retained Chain/Baseline Dimensions
View Labeling Settings
Model View UI Enhancement
Enhanced Copy and Paste for PMI
Locked View
Single Side Dimension Enhancement
Sheet Numbering Enhancement
Insert Custom Symbol Enhancement
Hole Callouts on Non-Planar Faces
Tooling MW and PDW: Performance Improvements
MW and PDW: TC integration
MW: Concept mold design layout
MW: Mold costing
MW: Mold Design Automation
PDW: Die Design and mfg. automation
PDW: Conceptual die layout
MW: Enhanced Moldex3D integration
MW: Parting Design Automation
MW: Electrode Design Automation
Standard part updates
Die engineering process – die line up and layout improvements
Mold design process improvements
Area Calculation
One-Step Formability Analysis
Motion Consolidation NX 11 – foundation for NX 12+ deliverable
Consistent UI & Data Model for creating constraints/joints
Consistent UI & Data Model for defining and editing motion (motion navigator)
Develop a consistent UI & Data Model for defining and organizing movements
(Gantt)
Develop common tools/capabilities in all motion applications (measurements,
interference, envelope…)
Motion Playback
Motion Analysis
MCD GTM Academia China
MCD Player Application
Motion Consolidation - Common Data Model
MCD Motion Consolidation - Prototype
System Navigator Reusable Modules
Electronic Cam Exchange w/ SCOUT
1D Model Generator for SIMIT
4GD Change Automation phase 1
Support for Minor Revision and Baseline
Routing Mechanical (Ship)
P&ID
Constraints phase 2
Drafting Parts List and Where Used
Check-Mate, validation and reporting
Spot Weld, Weld Assistant, BIW Datum
HD3D Validation and Report Foundation Service 4GD
Check-Mate 4GD - Log enhancement for 4GD support
Check-Mate 4GD - Integration with TC Check-Mate agent for 4GD
Check-Mate 4GD - Gadget enhancements for 4GD Support
Check-Mate and NX Visual Reporting - New OOTB
TC Validation Manager for 4GD
Check-Mate Checkers and Functions
NX Die validation
Check Wall Thickness improvements
Modeling, cont. Design Templates - Synch Links
Design Templates - Part Modules
Emboss Body Improvements
Datum CSYS Delete Parent Alerts
Remove Parameter Enhancements
Extrude Improvements
Expressions Dialog Refinements
Product Interface Usability
Scale Body - Change Input Body On Edit
Extension robustness
Offset Face Improvements
WAVE Link Misc. enhancements
Multi-trim
Feature Dependencies
Edit with Rollback Journaling
Transfer attributes
Self-intersecting Surface Alert
Multi Curve Continuity Analysis
Studio Surface improvements
OmniFree Transformer for NX
Routing
Routing support of attributes
Formboard Architecture
Update Bolting Options
Quick Path enhancements (NX 10.0.1
Overstock attributes and UI
Cableways properties enhancements
Spline path extensions direction UI
Sheet Metal
Bridge Bend Enhancements (NX 10.0.2)
Bead across bend and deformed area (NX 10.0.2)
Consolidate Aero and Advanced Sheet Metal
Advanced flange integration
Joggle integration
Lightening Cutouts
IML / OML output
Revise Solid Punch
Teamcenter Inside NX 4GD Weld/Datum - TCIN Support (NX 10.0.2)
Open Native Part Files In Managed Mode (NX 10.0.1)
AD/LD - TCIN Support
NXLE TCIN - Model Support
NXLE TCIN - Managing File Objects in Teamcenter
NXLE TCIN - P&ID Data Model in TC
Active Workspace - Enhancements phase 3
Active Workspace Components in NX phase 1
4GD Change Management - Support for Minor Revisions
4GD Change Management - Integration with Active Workspace
4GD Change Management - Intelligent Save Management
Support 4GD Constraints phase 2
Native Support for PDM Attributes (NX 10.0.1)
4GD Routing - TCIN Support
4GD Drafting - TCIN Support for PL
ECAD-MCAD Ref Designator
TC Session Reconnect phase 2
Integration with RevBOM APIs (Assembly Performance)
Change Management - Intelligent Save Management
Rename JT files on import to Smaragd
Authoring Manufacturing Views and Model View Disclosure
Active Workspace Support for P&ID
DEAP Support
4GD Routing Enhancements
Release Compatibility NX 11.0.0 and TC 9.1.x
Symbolica Teamcenter Integration
Expose part Master Metadata inside NX
Weld 4GD for Weld Assistant (NX 10.0.2)
4GD support for BIW datums (NX 10.0.2)
Impact Analysis for welds - Change management support
Move Rules Based Weld application to common 4GD data
model
Configurable welding symbols
Weld support for Change Management in 4GD
Weld Support for Change Management in 4gd
Edit Multiple Single Welds
Single Feature JointMark
Weld and Sealer Mirror
Symbolica Powerful calculations environment
Engineering calculation note book.
Creation of complex calculations
Bi-directional integration with NX
Simultaneous equation solving
Design Reuse PTS Visual Rules into NX
New Expressions Navigator
Expressions CAE Support
Measurement Support for Mixed Modeling
Web-Based Content Delivery Mechanism
Reuse Library Applications Support
Automotive Packaging Pedestrian Protection Standards Update
Eye Ellipse update
Seat Belt Anchorage updates
Auto Packaging Standards ongoing updates
Retirement of Body Design
Support Facet Body Input - phase 1
Crash Barrier enhancement
Pedestrian protection E NCAP V 8 standards update
Use of Base data consistency
Testing suite enlargement and Use case robustness
P&ID Designer P&ID Library Authoring Tools
P&ID Template Creation
NXLE Diagram Foundation Support for Active Workspace 3.1
NXLE Framework Support for ELD
Intelligent Save
P&ID Active Workspace Integration
UI Consistency
NX Human Deformable mesh figures
Ship Structures Ship Navigator
Multiple selection for stiffener by support
Page 7 Siemens PLM Software www.bogaziciyazilim.com
Kullanıcı Arayüzü
Page 8 Siemens PLM Software www.bogaziciyazilim.com
Geliştirilmiş Pencere Yönetimi
• Ctrl+Tab ile pencereler arası geçiş
• Pencereler içerisinde parçaların
öngörülüşlerinin görülmesi
• Window menüsünün geliştirilmesi
Page 9 Siemens PLM Software www.bogaziciyazilim.com
Otomatik Modül Değişimi
• Önceki NX versiyonlarında hangi modül içerisinde çalışılıyorsa parça değiştirildiğinde aynı modül içerisinde
kalıyordu.
• Örneğin; Drafting olan bir part dosyasında modeling olan bir parçaya geçildiğinde toolbar’ların tümü drafting’te
kalıyordu.
• NX 11 ile parçanın çalışıldığı modül ne ise otomatik olarak o modüle geçer.
Page 10 Siemens PLM Software www.bogaziciyazilim.com
Isolate in New Window
• Tek bir Component’in veya alt montajın
görülebileceği ayrı bir pencere oluşturulabilir.
• Üzerinde çalışılan parça ayrıntılı olarak
görülebilir.
• Ana montaj ve ayrılmış parça ekranda aynı
anda görülebilir.
Page 11 Siemens PLM Software www.bogaziciyazilim.com
Convergent Modeling Technology
…3D printing of production
parts and tooling
…Additive and subtractive
manufacturing processes
Any design medium: Point
Cloud, Polygons, NURBS, …
…Streamlined
workflows without
conversion!
…Simulation driven
design and optimization
Page 12 Siemens PLM Software www.bogaziciyazilim.com
Convergent Modeling Technology
Page 13 Siemens PLM Software www.bogaziciyazilim.com
Convergent Modeling Technology
• NX içerisinde modellenmiş datalar ile facet body’ler
(nokta bulutu) birlikte model oluşturmak için
kullanılabilirler.
• Taranmış datalar veya NX içerisinde ki
operasyonlardan elde edilmiş datalar Convergent
model olarak kullanılabilir.
• Reverse engineering işlemlerine gerek yok.
• Yapılan tüm işlemler parametrik olur.
• Polygon/facet data doğrudan kullanılabilir.
Page 14 Siemens PLM Software www.bogaziciyazilim.com
Convergent Modeling Technology
Reverse Engineering
and Repair
Modifying Optimized
Geometry
Existing Design Modification
Medical
Logo Engraving
Incorporating
Lattice Features
Page 15 Siemens PLM Software www.bogaziciyazilim.com
Modeling’te Gelen Yenilikler
Page 16 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Sketch
• Geliştirilmiş Skecth Arayüzü
• Büyük çizimler için performans iyileştirmeleri
• İlk ölçüde ölçeklendirme
• Scale Curve
• Geliştirilmiş Constraints komutları
• Sketch Browser
• Sketch’in üzerine çizilen obje silinse dahi ilişki
silinmez
Page 17 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Blend
• Edge ve face blend komutları daha komplex
yüzeylerde çalışır hale getirildi.
• Edge Blend yüzeylerin üst üste çakıştığı yerler
kendini otomatik olarak düzeltiyor.
• Face blend içerisinde ki Trim and attach options
Page 18 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Swept Volume
• Swept Volume komutu ile katı obje bir çizgi
yolunca süpürülebilmektedir.
Page 19 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Flattening and Forming
• Hızlı ve doğru geometrik temelli düzleştirici
• 3D parçaları 2D’ye dönüştürür, açılmış parçaları tekrar geri sarar
Original shape
Flattened shape
Create curves Formed curves
Page 20 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Emboss Body
• Emboss Body komutu ile açık kenarlı sheet
body’ler birleştirilebilir.
• Tool obje olarak birden fazla obje seçilebilir.
Page 21 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Combine
• Birden fazla kesişen sheet body bölgelerini
kırpmak veya birleştirmek için combine
komutunu kullanın.
Page 22 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Variable Offset Face
• Sheet veya solid body’lere sınırlar atanarak
farklı ofset veya kalınlıklar verilebilir.
Page 23 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Trim Sheet
• Tool olarak seçilen parça hedef objenin
tamamını kesmese dahi trim işlemi
gerçekleştirilebiliyor.
Page 24 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Extrude
• Extrude içerisinde olan End ve Start
seçenekleri artık açık profil kesitleri
içinde çalışmaktadır.
Page 25 Siemens PLM Software www.bogaziciyazilim.com
NX 11 Design - Synchronous modelling
• Replace Face komutu sheet body’ler üzerinde
de çalışıyor.
• Optimize face komutu otomatik olarak bozuk
yüzeyleri buluyor.
• Delete Face ile multi-body oluşturulabiliyor.
Page 26 Siemens PLM Software www.bogaziciyazilim.com
Point Cloud
Page 27 Siemens PLM Software www.bogaziciyazilim.com
Point Cloud
• Nokta bulutu(Point Cloud) verileri, ürünlerin ve buna bağlı
çevre durumlarını 3 boyutlu ortamda incelenmesine olanak
sağlar. NX 11'de, bu verileri 3B olarak yeniden oluşturmak
yerine doğrudan point cloud verilerine ulaşılabilir bu datalar
üzerinde aşağıda ki işlemler yapılabilir:
• Mesafe gibi basit ölçüm
• Temel düzenleme araçları:
• Göster / gizle
• Parametreleri Düzenle
• Dönüşüm
• Sil
Page 28 Siemens PLM Software www.bogaziciyazilim.com
Point Cloud
Page 29 Siemens PLM Software www.bogaziciyazilim.com
Assembly
Page 30 Siemens PLM Software www.bogaziciyazilim.com
Assembly
• Display Parent: List Parents in Order
• Constraint Limits: Distance and Angle
Page 31 Siemens PLM Software www.bogaziciyazilim.com
NX Iray+ Rendering
Page 32 Siemens PLM Software www.bogaziciyazilim.com
NX Iray+ Rendering
• NX Ray Traced Studio ekranına entegre edilmiş
yeni Lightworks Iray + üst düzey işleme motoru
• Daha kolay gerçekçi interaktif ekran, görüntü
üretimi
• Fiziksel olarak gerçekçi malzemeler
• Uzak bilgisayardan render desteği
Page 33 Siemens PLM Software www.bogaziciyazilim.com
NX Iray+ Rendering
• Yeni Malzemeler ve Sahneler
Page 34 Siemens PLM Software www.bogaziciyazilim.com
Realize Shape
Page 35 Siemens PLM Software www.bogaziciyazilim.com
Realize Shape - Subdivision Modeling
Copy & Paste
Working
region
Connect to
geometry
NX 10 NX 11
• New Select Sharp/Weighted edges selection intent
• New Copy & Paste
• New Split & Merge
• New Mirror & Offset
• New Define working regions
• New Connect to geometry
• Primitive segmentation control
• Continuity control in all creation commands
• Transform – Polylines & within Extrude
• Consistent cage selection intent
• Rationalized selection methods
• Consistent de-select automatically
• Polyline preference settings
• Polyline only bodies
• Snapping to cage objects
• Symmetric edge support in fill
• Bridge between faces with open edges
• Delete supports all entity types
Page 36 Siemens PLM Software www.bogaziciyazilim.com
NX Realize Shape
• Die Haptiker firmasının Mercedes için
yapmış olduğu konsept araba dizayn
• Endüstriyel dizayn için Realize Shape
benzeri programlara göre daha başarılı
Page 37 Siemens PLM Software www.bogaziciyazilim.com
NX Realize Shape
Page 38 Siemens PLM Software www.bogaziciyazilim.com
Drafting
Page 39 Siemens PLM Software www.bogaziciyazilim.com
Secondary Geometry Representations
• Drafting içerisinde ki komponentler birincil veya ikincil
geometri olarak belirlenebilmektedir
• Renk, çizgi/yazı Tipi ve kalınlık, gizli çizgiler için
bağımsız denetimler
• Birincil geometri, çizimde gösterilmek istenen ana
elemanlardır
• İkincil geometri ise çizimde referans olarak
belirtilecek elemanlar tanımlanır
• Birincil ve ikincil nesneler görsel olarak ayırt etmeye
yardımcı olur
Page 40 Siemens PLM Software www.bogaziciyazilim.com
Drawing Compare
• Kaydedilmiş bir part dosyası ile oturumda açılmış
geçerli parça arasında karşılaştırma yapılmasına
olanak sağlar.
• Revizyonlar arasında karşılaştırma yapılabilir.
• Geliştirilmiş karşılaştırma raporları sunar
• Değişiklikleri hızlı ve kolay bir şekilde belirleyerek
çizim kontrol süresini önemli ölçüde azaltır.
• Bir çizim değişikliğinden kaynaklanabilecek üretim
hatalarını azaltmaya yardımcı olur
Page 41 Siemens PLM Software www.bogaziciyazilim.com
View Break
• Kesit alınmış parçaya view break uygulandığında kesit çizgisi artık
silinmiyor.
• View break uygulanmış görünüşlere konulan ölçüler özelleştirildi.
Page 42 Siemens PLM Software www.bogaziciyazilim.com
Hole Callout
• Radyal çap, delik derinliği ve diş derinliği boyutunun görünümünü birbirlerinden bağımsız olarak kontrol
edilebilmektedir.
Page 43 Siemens PLM Software www.bogaziciyazilim.com
PMI
Page 44 Siemens PLM Software www.bogaziciyazilim.com
Convert to PMI
• Model görünümlerini içerisinde bulunan
ölçüleri ve diğer nesnelerin tümünü
PMI’a otomatik olarak dönüştürülebilir.
• Ayrıntılı dönüşüm raporlaması sunar
• Manuel bir işlemle oluşan hataları
azaltmaya yardımcı olur
Page 45 Siemens PLM Software www.bogaziciyazilim.com
Topology Optimization
Page 46 Siemens PLM Software www.bogaziciyazilim.com
Topology Optimization
• Frustum Inc'in teknolojisine dayanılarak hazırlanmıştır
• Geleneksel Topoloji Optimizasyonu çözümlerinden farklı bir yaklaşım kullanır
• NX içerisinde CAD modülü içerisinde çalışır
• Mesh atmaya gerek olmadan çalışır
• Tasarım gereksinimlerini baz alarak analiz yapar
• Hacim ekleme veya çıkartma işlemlerini yapar
• Bağlama kısıtlamaları belirtilir
• Üretim kısıtlamaları
• Yükler ve destekler belirlenir
• Çözünürlük kontrolü seviyesi
• Bir ağırlık ve yoğunluk sınırlaması eklenebilir
• Hızlı Topoloji Optimizasyonu çözümü
• Gerektiğinde keskin kenarları olan, yumuşatılmış organik şekiller sunar
Page 47 Siemens PLM Software www.bogaziciyazilim.com
Topology Optimization
Page 48 Siemens PLM Software www.bogaziciyazilim.com
Topology Optimization
Page 49 Siemens PLM Software www.bogaziciyazilim.com
3D Printing - Additive Manufacturing
Page 50 Siemens PLM Software www.bogaziciyazilim.com
Additive Manufacturing
CAD Lattice creation & representation
Support structure modelling
Page 51 Siemens PLM Software www.bogaziciyazilim.com
Additive Manufacturing
Page 52 Siemens PLM Software www.bogaziciyazilim.com
NX 11 3D Printing
• NX model dataları dönüştürme işlemine
uğramadan doğrudan 3D yazıcıya
model gönderin gönderilebilir.
• File > 3D Print
Page 53 Siemens PLM Software www.bogaziciyazilim.com
Teşekkürler www.bogaziciyazilim.com/
Recommended