View
17
Download
0
Category
Preview:
Citation preview
Plasma APC 500
Nagolder Str. 6172224 Ebhausen
Diener electronic GmbH + Co. KGGERMANY
sales@plasma.dewww.plasma.de
Tel.: +49 (0)7458-999 31-0Fax: +49 (0)7458-999 31-50
TECHNISCHE DATEN• Generator Frequenz: ca. 40 kHz• Leistung: ca. 500 W• Behandlungsbreite: ca. 50 - 60 mm• Versorgungsspannung: 230 V, 50/60 Hz
ABMESSUNGEN
Versorgungseinheit Plasmaerzeuger Flexible Zuleitung
Breite (mm) 562 180
Höhe (mm) 211 60
Tiefe (mm) 420 40
Gewicht (kg) 20 0,5 3
Länge (mm) ca. 300
Durchmesser (mm) ca. 19Plasmaerzeuger
AnwendungenAtmosphärische Plasmatechnologie führt zur Steigerung der Qualität in der Produktion durch Oberfl ächenaktivierung und / oder –reinigung.
Folgende Anwendungen sind mit dem APC 500 möglich:
1. Feinstreinigung und Aktivierung durch die Reaktion der im Plasmastrahl enthaltenen reaktiven Teilchen (Radikale).
2. Zusätzlich werden durch den luftbeschleunigten Plasmastrahl die losen, anhaftenden Partikel von der Oberfl äche entfernt.
Der APC 500 ist für die Vorbehandlung von Oberfl ächen konzipiert, um die Haftung zu verbessern:
Dieses Gerät wird für nicht leitende Ober� ächen benutzt.
Plasma APC500
Druckfarbe
Lack
Klebstoff
Schaum
etc.
Oberfl ächen von
Kunststoff
Elastomer
Keramik
Glas
Automobilindustrie
Medizintechnik
Kunststofftechnik
Elastomertechnik
etc.
auf für
Plasma APC 500
Nagolder Str. 6172224 Ebhausen
Diener electronic GmbH + Co. KGGERMANY
sales@plasma.dewww.plasma.de
Tel.: +49 (0)7458-999 31-0Fax: +49 (0)7458-999 31-50
Printing ink
Varnish
Adhesive
Foam
etc.
Surfaces of
Plastics
Elastomers
Ceramic
Glass
Automotive
Medical
Plastics Industry
Rubber Industry
etc.
on for
Plasma APC500
Plasma Head
ApplicationAtmospheric plasma technology increases production quality by activating and for cleaning the surface.
The following applications are possible with the APC 500:
1. Ultra-fi ne cleaning and activation by means of reactive particles contained in the plasma jet (radicals).
2. Additionally the loose, adhesive particles are removed from the surface by the plasma jet accelerated air.
The APC 500 is designed for pre-treating of surfaces, toimprove the adhesion of:
This device is to be used on non conductive surfaces.
TECHNICAL DATA• Generator frequency: approx. 40 kHz• Power: approx. 500 W• Width of treatment: approx. 50 - 60 mm• Supply voltage: 230 V AC, 50/60 Hz
DIMENSIONS
Power supply Plasma head Flexible tube
Width (mm) 562 180
Height (mm) 211 60
Depth (mm) 420 40
Weight (kg) 20 0,5 3
Lenght (mm) approx. 3000
Diameter (mm) approx. 19
Recommended