View
221
Download
0
Category
Preview:
Citation preview
8/12/2019 Signal & Systems _EDUSAT
1/87
Introduction to Signals &
Systems
By:
Dr. AJAY KUMAR
Associate Prof. ECE
BCET Gurdaspur
8/12/2019 Signal & Systems _EDUSAT
2/87
Introduction to Signals
A Signal is the function of one or more independent
variables that carries some information to represent a
physical phenomenon.
A continuous-time signal, also called an analog signal, is
defined along a continuum of time.
8/12/2019 Signal & Systems _EDUSAT
3/87
A discrete-time signal is defined at discrete
times.
8/12/2019 Signal & Systems _EDUSAT
4/87
Elementary Signals
Sinusoidal & Exponential Signals Sinusoids and exponentials are important in signal and
system analysis because they arise naturally in the
solutions of the differential equations.
Sinusoidal Signals can expressed in either of two ways :
cyclic frequencyform- A sin 2fot =A sin(2/To)t
radian frequency form- A sin ot
o = 2fo = 2/To
To= Time Period of the Sinusoidal Wave
8/12/2019 Signal & Systems _EDUSAT
5/87
Sinusoidal & Exponential Signals Contd.
x(t) = A sin (2fot+ )= A sin (ot+ )
x(t) = Aeat Real Exponential
= Aejt = A[cos (ot) +j sin (ot)]Complex Exponential
= Phase of sinusoidal wave
A = amplitude of a sinusoidal or exponential signal
fo= fundamental cyclic frequency of sinusoidal signal
o = radian frequency
Sinusoidal signal
8/12/2019 Signal & Systems _EDUSAT
6/87
Unit Step Function
1 , 0
u 1/ 2 , 0
0 , 0
tt t
t
Precise Graph Commonly-Used Graph
8/12/2019 Signal & Systems _EDUSAT
7/87
Signum Function
1 , 0
sgn 0 , 0 2u 1
1 , 0
tt t t
t
Precise Graph Commonly-Used Graph
The signum function, is closely related to the unit-step
function.
8/12/2019 Signal & Systems _EDUSAT
8/87
Unit Ramp Function
, 0
ramp u u0 , 0
tt tt d t t
t
The unit ramp function is the integral of the unit step function.
It is called the unit ramp function because for positive t, its
slope is one amplitude unit per time.
8/12/2019 Signal & Systems _EDUSAT
9/87
Rectangular Pulse or Gate Function
Rectangular pulse, 1/ , / 2
0 , / 2a
a t at
t a
8/12/2019 Signal & Systems _EDUSAT
10/87
Unit Impulse Function
As approaches zero, g approaches a unit
step andg approaches a unit impulse
a t
t
So unit impulse function is the derivativeof the unit step
function or unit step is the integral of the unit impulse
function
Functions that approach unit step and unit impulse
8/12/2019 Signal & Systems _EDUSAT
11/87
Representation of Impulse Function
The area under an impulse is called its strength or weight. It is
represented graphically by a vertical arrow. An impulse with a
strength of one is called a unit impulse.
8/12/2019 Signal & Systems _EDUSAT
12/87
Properties of the Impulse Function
0 0g gt t t dt t
The Sampling Property
0 01
a t t t t
a
The Scaling Property
The Replication Property
g(t)(t) = g (t)
8/12/2019 Signal & Systems _EDUSAT
13/87
Unit Impulse Train
The unit impulse train is a sum of infinitely uniformly-spaced impulses and is given by
, an integer Tn
t t nT n
8/12/2019 Signal & Systems _EDUSAT
14/87
The Unit Rectangle Function
The unit rectangle or gate signal can be represented as combinationof two shifted unit step signals as shown
8/12/2019 Signal & Systems _EDUSAT
15/87
The Unit Triangle Function
A triangular pulse whose height and area are both one but its base
width is not, is called unit triangle function. The unit triangle is
related to the unit rectangle through an operation called
convolution.
8/12/2019 Signal & Systems _EDUSAT
16/87
Sinc Function
sinsinc ttt
8/12/2019 Signal & Systems _EDUSAT
17/87
Discrete-Time Signals
Samplingis the acquisition of the values of a
continuous-time signal at discrete points in time
x(t) is a continuous-time signal, x[n] is a discrete-time signal
x x where is the time between sampless sn nT T
8/12/2019 Signal & Systems _EDUSAT
18/87
Discrete Time Exponential and
Sinusoidal Signals
DT signals can be defined in a manner analogous to theircontinuous-time counter part
x[n] = A sin (2n/No+)
= A sin (2Fon+ )
x[n] = an
n = the discrete time
A = amplitude
= phase shifting radians,No= Discrete Period of the wave
1/N0 = Fo = o/2 = Discrete Frequency
Discrete Time Sinusoidal Signal
Discrete Time Exponential Signal
8/12/2019 Signal & Systems _EDUSAT
19/87
Discrete Time Sinusoidal Signals
8/12/2019 Signal & Systems _EDUSAT
20/87
Discrete Time Unit Step Function or
Unit Sequence Function
1 , 0
u0 , 0
nn
n
8/12/2019 Signal & Systems _EDUSAT
21/87
Discrete Time Unit Ramp Function
, 0
ramp u 10 , 0
n
m
n nn m
n
8/12/2019 Signal & Systems _EDUSAT
22/87
Discrete Time Unit Impulse Function or
Unit Pulse Sequence
1 , 0
0 , 0
nn
n
for any non-zero, finite integer .n an a
8/12/2019 Signal & Systems _EDUSAT
23/87
Unit Pulse Sequence Contd.
The discrete-time unit impulse is a function in the
ordinary sense in contrast with the continuous-
time unit impulse. It has a sampling property.
It has no scaling property i.e.
[n]= [an] for any non-zero finite integer a
8/12/2019 Signal & Systems _EDUSAT
24/87
Operations of Signals
Sometime a given mathematical function maycompletely describe a signal .
Different operations are required for different
purposes of arbitrary signals. The operations on signals can be
Time Shifting
Time Scaling
Time Inversion or Time Folding
8/12/2019 Signal & Systems _EDUSAT
25/87
Time Shifting
The original signalx(t) is shifted by anamount t.
X(t)X(t-to) Signal DelayedShift to theright
8/12/2019 Signal & Systems _EDUSAT
26/87
Time Shifting Contd.
X(t)X(t+to) Signal AdvancedShift
to the left
8/12/2019 Signal & Systems _EDUSAT
27/87
Time Scaling
For the given function x(t), x(at) is the time
scaled version of x(t)
For a 1,period of function x(t) reduces andfunction speeds up. Graph of the function
shrinks.
For a 1, the period of the x(t) increasesand the function slows down. Graph of the
function expands.
8/12/2019 Signal & Systems _EDUSAT
28/87
Time scaling Contd.
Example: Givenx(t) and we are to findy(t) =x(2t).
The period ofx(t) is 2 and the period ofy(t) is 1,
8/12/2019 Signal & Systems _EDUSAT
29/87
8/12/2019 Signal & Systems _EDUSAT
30/87
Time Reversal
Time reversal is also called time folding
In Time reversal signal is reversed with
respect to time i.e.
y(t) = x(-t) is obtained for the given
function
8/12/2019 Signal & Systems _EDUSAT
31/87
Time reversal Contd.
O ti f Di t Ti
8/12/2019 Signal & Systems _EDUSAT
32/87
0 0 , an integern n n n Time shifting
Operations of Discrete Time
Functions
8/12/2019 Signal & Systems _EDUSAT
33/87
Operations of Discrete Functions Contd.
Scaling; Signal Compression
n Kn Kan integer > 1
8/12/2019 Signal & Systems _EDUSAT
34/87
Classification of Signals
Deterministic & Non Deterministic Signals
Periodic & A periodic Signals
Even & Odd Signals
Energy & Power Signals
8/12/2019 Signal & Systems _EDUSAT
35/87
D t i i ti & N D t i i ti Si l
8/12/2019 Signal & Systems _EDUSAT
36/87
Deterministic & Non Deterministic Signals
Contd.
Non Deterministic or Random signals
Behavior of these signals is randomi.e. not predictable
w.r.t time.
There is an uncertainty with respect to its value at anytime.
These signals cantbe expressed mathematically. For example Thermal Noise generated is non
deterministic signal.
8/12/2019 Signal & Systems _EDUSAT
37/87
Periodic and Non-periodic Signals
Given x(t) is a continuous-time signal
x (t) is periodic iff x(t) = x(t+T) for any T and any integer n
Example
x(t) = A cos(wt) x(t+T) = A cos[wt+T)] = A cos(wt+wT)= A cos(wt+2)
= A cos(wt)
Note: T=1/fo ; w2fo
8/12/2019 Signal & Systems _EDUSAT
38/87
Periodic and Non-periodic Signals
Contd. For non-periodic signals
x(t) x(t+T)
A non-periodic signal is assumed to have a
period T =
Example of non periodic signal is an
exponential signal
8/12/2019 Signal & Systems _EDUSAT
39/87
Important Condition of Periodicity for
Discrete Time Signals A discrete time signal is periodic if
x(n) = x(n+N)
For satisfying the above condition the
frequency of the discrete time signal should
be ratio of two integers
i.e. fo = k/N
8/12/2019 Signal & Systems _EDUSAT
40/87
Sum of periodic Signals
X(t) = x1(t) + X2(t)
X(t+T) = x1(t+m1T1) + X2(t+m2T2)
m1T1=m2T2= T
= Fundamental period Example: cos(t/3)+sin(t/4)
T1=(2)/(/3)=6; T2 =(2)/(/4)=8;
T1/T2=6/8 = = (rational number) = m2/m1m1T1=m2T2Find m1 and m2
6.4 = 3.8 = 24 = T
8/12/2019 Signal & Systems _EDUSAT
41/87
Sum of periodic Signalsmay not
always be periodic!
T1=(2)/(1)= 2; T2 =(2)/(sqrt(2));
T1/T2= sqrt(2);Note: T1/T2 = sqrt(2) is an irrational number
X(t) is aperiodic
tttxtxtx 2sincos)()()( 21
8/12/2019 Signal & Systems _EDUSAT
42/87
Even and Odd SignalsEven Functions Odd Functions
g t gt g t gt
8/12/2019 Signal & Systems _EDUSAT
43/87
Even and Odd Parts of Functions
g g
The of a function is g 2et t
t
even part
g g
The of a function is g2
o
t tt
odd part
A function whose even part is zero, is oddand a functionwhose odd part is zero, is even.
8/12/2019 Signal & Systems _EDUSAT
44/87
Various Combinations of even and odd
functionsFunction type Sum Difference Product Quotient
Both even Even Even Even Even
Both odd Odd Odd Even Even
Even and odd Neither Neither Odd Odd
8/12/2019 Signal & Systems _EDUSAT
45/87
Product of Two Even Functions
Product of Even and Odd Functions
8/12/2019 Signal & Systems _EDUSAT
46/87
Product of Even and Odd Functions Contd.
Product of an Even Function and an Odd Function
8/12/2019 Signal & Systems _EDUSAT
47/87
Product of an Even Function and an Odd Function
Product of Even and Odd Functions Contd.
8/12/2019 Signal & Systems _EDUSAT
48/87
Product of Two Odd Functions
Product of Even and Odd Functions Contd.
8/12/2019 Signal & Systems _EDUSAT
49/87
Derivatives and Integrals of Functions
Function type Derivative Integral
Even Odd Odd + constant
Odd Even Even
8/12/2019 Signal & Systems _EDUSAT
50/87
Discrete Time Even and Odd Signals
g g
g2
e
n nn
g gg
2o
n nn
g gn n g gn n
8/12/2019 Signal & Systems _EDUSAT
51/87
Combination of even and odd
function for DT SignalsFunction type Sum Difference Product Quotient
Both even Even Even Even Even
Both odd Odd Odd Even Even
Even and odd Even or Odd Even or odd Odd Odd
8/12/2019 Signal & Systems _EDUSAT
52/87
Products of DT Even and Odd
FunctionsTwo Even Functions
P d t f DT E d Odd
8/12/2019 Signal & Systems _EDUSAT
53/87
Products of DT Even and Odd
Functions Contd.An Even Function and an Odd Function
8/12/2019 Signal & Systems _EDUSAT
54/87
Proof Examples
Prove that product of two evensignals is even.
Prove that product of two oddsignals is odd.
What is the product of an evensignal and an odd signal? Prove it!
)()()(
)()()(
)()()(
21
21
21
txtxtx
txtxtx
txtxtx
Eventx
txtxtx
txtxtx
txtxtx
)(
)()()(
)()()(
)()()(
21
21
21
Change t-t
8/12/2019 Signal & Systems _EDUSAT
55/87
Products of DT Even and Odd
Functions Contd.Two Odd Functions
8/12/2019 Signal & Systems _EDUSAT
56/87
Energy and Power Signals
Energy Signal A signal with finite energy and zero power is called
Energy Signal i.e.for energy signal
0
8/12/2019 Signal & Systems _EDUSAT
57/87
Energy and Power Signals Contd.
Power Signal Some signals have infinite signal energy. In that
caseit is more convenient to deal with average
signal power.
For power signals
0
8/12/2019 Signal & Systems _EDUSAT
58/87
Energy and Power Signals Contd.
For a periodic signal x(t) the average signal
power is
Tis any period of the signal.
Periodic signals are generally power signals.
2
x
1
xTP t dtT
8/12/2019 Signal & Systems _EDUSAT
59/87
Signal Energy and Power for DT
Signal
The signal energyof a for a discrete time signal x[n] is
2
x xn
E n
A discrtet time signal with finite energy and zero
power is called Energy Signal i.e.for energy signal
0
8/12/2019 Signal & Systems _EDUSAT
60/87
Signal Energy and Power for DT
Signal Contd.
The average signal power of a discrete time power signal
x[n] is
1
2
x
1lim x
2
N
Nn N
P nN
2
x
1x
n N
P nN
For a periodic signal x[n] the average signal power is
The notation means the sum over any set of
consecutive 's exactly in length.
n N
n N
8/12/2019 Signal & Systems _EDUSAT
61/87
What is System?
Systems process input signals to produce output
signals
A system is combination of elements that
manipulates one or more signals to accomplish a
function and produces some output.
system outputsignal
input
signal
8/12/2019 Signal & Systems _EDUSAT
62/87
8/12/2019 Signal & Systems _EDUSAT
63/87
System - Example
Consider an RL series circuit
Using a first order equation:
dt
tdiLRtitVVtV
dt
tdiLtV
LR
L
)()()()(
)()(
LV(t)
R
8/12/2019 Signal & Systems _EDUSAT
64/87
Mathematical Modeling of Continuous
Systems
Most continuous time systems represent how continuous
signals are transformed via differential equations.
E.g. RC circuit
System indicating car velocity
)(1
)(1)(
tvRC
tvRCdt
tdvsc
c
)()()( tftvdt
tdvm
8/12/2019 Signal & Systems _EDUSAT
65/87
Mathematical Modeling of Discrete
Time Systems
Most discrete time systems represent how discrete signals are
transformed via difference equations
e.g. bank account, discrete car velocity system
][]1[01.1][ nxnyny
][]1[][ nfm
nvm
mnv
8/12/2019 Signal & Systems _EDUSAT
66/87
Order of System
Order of the Continuous System is the highest
power of the derivative associated with the output
in the differential equation
For example the order of the system shown is 1.
)()()(
tftvdt
tdvm
8/12/2019 Signal & Systems _EDUSAT
67/87
Order of System Contd.
Order of the Discrete Time system is the
highest number in the difference equation
by which the output is delayed
For example the order of the system shown
is 1.
][]1[01.1][ nxnyny
8/12/2019 Signal & Systems _EDUSAT
68/87
Interconnected Systems
notes
Parallel
Serial (cascaded)
Feedback
LV(t)
R
L
C
8/12/2019 Signal & Systems _EDUSAT
69/87
Interconnected System Example
Consider the following systems with 4 subsystem Each subsystem transforms it input signal
The result will be:
y3(t)=y1(t)+y2(t)=T1[x(t)]+T2[x(t)]
y4(t)=T3[y3(t)]= T3(T1[x(t)]+T2[x(t)]) y(t)= y4(t)* y5(t)= T3(T1[x(t)]+T2[x(t)])* T4[x(t)]
8/12/2019 Signal & Systems _EDUSAT
70/87
Feedback System Used in automatic control
e(t)=x(t)-y3(t)= x(t)-T3[y(t)]=
y(t)= T2[m(t)]=T2(T1[e(t)])
y(t)=T2(T1[x(t)-y3(t)])= T2(T1([x(t)] - T3[y(t)] ) )=
=T2(T1([x(t)]T3[y(t)]))
8/12/2019 Signal & Systems _EDUSAT
71/87
Types of Systems
Causal & Anticausal Linear & Non Linear
Time Variant &Time-invariant
Stable & Unstable Static & Dynamic
Invertible & Inverse Systems
8/12/2019 Signal & Systems _EDUSAT
72/87
Causal & Anticausal Systems
Causal system : A system is said to be causal if
the present value of the output signal depends only
on the present and/or past values of the input
signal. Example: y[n]=x[n]+1/2x[n-1]
8/12/2019 Signal & Systems _EDUSAT
73/87
Causal & Anticausal Systems Contd.
Anticausal system : A system is said to be
anticausalif the present value of the output
signal depends only on the future values of
the input signal.
Example:y[n]=x[n+1]+1/2x[n-1]
8/12/2019 Signal & Systems _EDUSAT
74/87
Linear & Non Linear Systems
A system is said to be linear if it satisfies the
principle of superposition
For checking the linearity of the given system,
firstly we check the response due to linearcombination of inputs
Then we combine the two outputs linearly in the
same manner as the inputs are combined and again
total response is checked
If response in step 2 and 3 are the same,the system
is linear othewise it is non linear.
8/12/2019 Signal & Systems _EDUSAT
75/87
Time Invariant and Time Variant
Systems
A system is said to be time invariant if a time
delay or time advance of the input signal leads to a
identical time shift in the output signal.
0
0 0
( ) { ( )}
{ { ( )}} { ( )}
i
t t
y t H x t t
H S x t HS x t
00
0 0
( ) { ( )}
{ { ( )}} { ( )}
t
t t
y t S y t
S H x t S H x t
8/12/2019 Signal & Systems _EDUSAT
76/87
Stable & Unstable Systems
A system is said to be bounded-input bounded-
output stable (BIBO stable) iff every bounded
input results in a bounded output.
i.e.| ( ) | | ( ) |x yt x t M t y t M
8/12/2019 Signal & Systems _EDUSAT
77/87
Stable & Unstable Systems Contd.
Example
-y[n]=1/3(x[n]+x[n-1]+x[n-2])
1[ ] [ ] [ 1] [ 2]
3
1(| [ ] | | [ 1] | | [ 2] |)
31
( )3
x x x x
y n x n x n x n
x n x n x n
M M M M
8/12/2019 Signal & Systems _EDUSAT
78/87
Stable & Unstable Systems Contd.
Example:The system represented by
y(t) = A x(t) is unstable ; A1
Reason:let us assume x(t) = u(t), then atevery instant u(t) will keep on multiplying
with A and hence it will not be bonded.
8/12/2019 Signal & Systems _EDUSAT
79/87
Static & Dynamic Systems
A static system is memoryless system
It has no storage devices
its output signal depends on present values of the
input signal
For example
8/12/2019 Signal & Systems _EDUSAT
80/87
8/12/2019 Signal & Systems _EDUSAT
81/87
Example: Static or Dynamic?
8/12/2019 Signal & Systems _EDUSAT
82/87
Example: Static or Dynamic?
Answer:
The system shown above is RC circuit
R is memoryless C is memory device as it stores charge
because of which voltage across it cant
change immediately Hence given system is dynamic or memory
system
8/12/2019 Signal & Systems _EDUSAT
83/87
8/12/2019 Signal & Systems _EDUSAT
84/87
LTI Systems
LTI Systems are completely characterized by its
unit sample response
The output of any LTI System is a convolution of
the input signal with the unit-impulse response, i.e.
Properties of Convolution
8/12/2019 Signal & Systems _EDUSAT
85/87
Commutative Property
][*][][*][ nxnhnhnx
Distributive Property
])[*][(])[*][(
])[][(*][
21
21
nhnxnhnx
nhnhnx
Associative Property
][*])[*][(][*])[*][(
][*][*][
12
21
21
nhnhnxnhnhnx
nhnhnx
Useful Properties of (DT) LTI Systems
http://stellar.mit.edu/S/course/6/sp08/6.003/courseMaterial/topics/topic1/lectureNotes/Lecture__3/Lecture__3.pdfhttp://stellar.mit.edu/S/course/6/sp08/6.003/courseMaterial/topics/topic1/lectureNotes/Lecture__3/Lecture__3.pdfhttp://stellar.mit.edu/S/course/6/sp08/6.003/courseMaterial/topics/topic1/lectureNotes/Lecture__3/Lecture__3.pdf8/12/2019 Signal & Systems _EDUSAT
86/87
Useful Properties of (DT) LTI Systems
Causality:
Stability:
Bounded Input Bounded Output
00][ nnh
k
kh ][
kk
knhxknhkxny
xnx
][][][][
][for
max
max
8/12/2019 Signal & Systems _EDUSAT
87/87
THANKS
Recommended