Stylux LED Recessed Lighting

STFG3202 FEATURESLED Recessed Lighting• Stainless Steel Cover/ Aluminum with plastic housing

• Plastic base

• Casts a Low, Even Spread of Energy Efficient LED Light

• 9 LEDs 0.8W / High CRI / 5500°K

• 220V - 240V AC Operating Range / Integrated, Constant Voltage Driver

• Stainless Steel Mounting Hardware & Junction Box

• Wire Connection Must be Made Inside of Fixture

• Suitable For Use in Wet Location - IP54

• Tamper proof screws

• Ground Connexion

We reserve the right to revise the design or components of any product due to

parts availability or change in UL standards, without assuming any obligation or

liability to modify any products previously manufactured, and without notice.

INSTALLATION INFORMATION

� � � � � � � �� � � � �� � � � � � �� � � � � � � � �

For Warranty Information,

please ask your dealer in your respective country

STYLUX STFG3202

There are two installation methods of this product : Instalation 1(Already has a suitable hole position); Instalation 2(Need to place the plastic housing).

Need all parts except 2pcs Self tapping screws

(top right corner beside the Hexagon tool)

Screw down 2pcs screws of the cover with

the Hexagon tool.Open the cover, everything so clearly now.

(Plastic housing and 2pcs self tapping screws.)

Assemble the panel diffuser. Wires need to be on the inside,

to prevent friction with the installation position.

Now, you can connecting wires

(note the L-Brown, N-Blue),

and necessary to make waterproof.