Saudi Specialized Laboratories Co.www.motabaqah.com*

MOTABAQAH Rule on Consumer Protectionwww.motabaqah.com*

*

*

*

*

*

*

*

*

*

*

*

*

To be a leading provider of testing, calibrating and certification services both locally and internationally and to be recognized and trusted as the supplier of choice for accurate and reliable results delivered in a timely fashion to the manufacturing industry.*

1.psd

MISSION STATEMENTTo provide world class conformity, compliance testing and certification of imported and domestically produced products to enhance the reputation of the manufacturer to and to ensure the highest level of safety and reliability of those products purchased by consumers.*

2.psd

Organizational Structure

Headquarters are in Riyadh Capitalization of SR 500million Offices and Collection Agents in all Major Ports Laboratories in Riyadh, Jeddah and Dammam More than 130 Staff Extensive, state-of-the-art testing equipment

*

Chemical and Microbiological Analysis LaboratoryChemical and Microbiological Analysis Lab is an established analytical laboratory with world class facilities It is licensed by Ministry of Commerce and Industry (MOCI) Accredited by Saudi Arabian Standard Organization (SASO) in compliance with (ISO 17025) as a private laboratory to issue conformity certificates. The Laboratory functions in compliance with the Kingdom regulations which requires mandatory screening and testing of all locally manufactured and imported products. Currently seeking UKAS accreditation

*

3.psd

4.psd

5.psd

Laboratory Equipment: Gas Chromatography- Mass Spectrometry, GC-MS Gas Chromatography (FID) High Performance Liquid Chromatography AAS and ICP UV-Vis Spectrophotometer Infra Red Spectrophotometer (FTIR) A full range of other equipment required for testing and analysis.

*

6.psd

7.psd

8.psd

Services:Chemical and Microbiological Analysis Lab provides extensive testing services for: Cosmetics Perfumes Toiletries Cleaning Agents

*

9.psd

*

*

*2010631020088882626

Genetically Modified Organism Laboratory Jeddah Lab Overview:The GMO Testing Laboratory is the first and only laboratory in the Kingdom approved by the Ministry of Commerce and Industry (MOCI) to provide testing for the detection of pork products or products produced by genetic manipulation techniques

Lab Services:GMO Testing Laboratory utilizes an advanced technology known as Nucleic Acid Testing to identify the presence of foreign DNA in food products. This technique is used to detect pork products in food. *

10.psd

11.psd

12.psd

Measurement, Calibration and Verification Lab (MCVL) Riyadh & DammamMeasurement, Calibration and Verification Lab. (MCVL) Conducts testing on a wide range of electronic, telecommunications and other sophisticated equipment Accredited by Saudi Arabian Standards Organization (SASO) to operate as a calibration, repair and conformity testing laboratory, in-line with ISO/IEC 17025 International Standards.

Calibration and testing of test equipment is achieved using standards that are directly/indirectly traceable to National Institute of Standards and Technology of U.S.A. (NIST) and/or National Physical Laboratory of U.K.

*

LAB Equipment:1. Mechanical Test Equipment2. Electrical Test Equipment3. Electronic Test Equipment4. Temperature Test Equipment5. Pressure / Vacuum / Test Equipment 6. Conformity Testing*

13.psd

14.psd

15.psd

16.psd

MOTABAQAH As ASP

MOTABAQAH as Agilents authorized service provider (ASP) in GCC, the first to be awarded this status in region.This new level of Authorization means that MOTABAQAH can provide exactly the same repair and calibration services as any Agilent service centre.Ensuring the highest levels of customer satisfaction possible. MOTABAQAH calibration lab will be commercial calibration lab to provide accredited measurements up to 50 GHz.and is one of the most comprehensive calibration labs in GCC stats.*

Provide Support to local customers in Agilent namePerform same services like a standard Agilent HubProvide same performance as a standard Agilent Hub (TAT, quality, documents, etc...)Keep MOTABAQAH people up to date by regular technical trainingsMonitor customer satisfactionStock Parts for repairStock Service Manual and Test procedureApplies Service NoteTransfer to Agilent equipment MOTABAQAH cannot service*Assist MOTABAQAH in their daily jobCover Equipment MOTABAQAH cannot handleIntegrate MOTABAQAH in Agilent Operating ModelProvide PartsProvide TrainingProvide an Escalation PathCalibrate MOTABAQAH ETEs for TraceabilityShare Service Note and Product Support PlanProvide New Test SoftwareShare new system setup to extend coverageSupport for warranty handling (Shares support informationCommunicate Safety Service Notes to be appliedProvide access to Metrologist and experienced technicians

ASP Migration Example of Cal Systems Setup (1)*TME Basic (2 Racks)Add-on TME

ASP Migration Example of Cal Systems Setup (2)*Power Supplies and LoadsLow Frequency

Examples of Calibration CapabilitiesNew Power-Supplies and Loads Power-Supplies 62xx, 65xx, 66xx series, E36xx series, N57xx series, N67xx series Load 6050x series, N33xx seriesOther Power-Supplies and Loads Older HP/Agilent Equipment All standards range Power-Supplies and Loads Non-Agilent Equipment All standards range Power-Supplies and Loads, customs test proceduresLow FrequencyInstruments Oscilloscopes Voltmeter, Multimeters Function & Pulse Generators Frequency Counters Data AcquisitionsRF/ Microwave: Power Meter, Scalar Analyzer, Network Analyzer LCR Meter, Signal GenNoise Measurement*

Non-Agilent Products Test System used in this configuration will allow MOTABAQAH to perform calibration on same categories of equipments. Typical equipments to be serviced: Network Analyzers, Spectrum Analyzers Modulation Analyzers RF and Microwave sources Power Meters, Power Sensors Power Supplies, Electronic Loads LCR Meter Multimeters, Oscilloscopes*

Electrical Products Testing Laboratory RiyadhThe lab carries out different test to cover all necessary requirements for safety and quality such as : Electrical Tests. Mechanical Tests. Safety Tests. Radiation, Toxicity and similar Hazards Tests.Durability

*

Electrical Products Testing Laboratory RiyadhThe lab uses high technical expertise, latest equipment and techniques. Some of these equipment are for:Measuring electrical current leakage.Measuring mechanical strength.Treatment of humidity that followed with electrical safety.Measuring radiation leakage

*

*

Toys Testing Laboratory - JeddahToys testing covers the safety requirement according to SASO, GSO, EN 71 and ASTM.The standards requirement covers three major tests:

Mechanical and Physical Tests

Flammability Test.

Chemical Test.

*

Toys Testing LaboratoryMechanical and Physical Tests:Tension TestEyes attachmentSmall partsDrop and ImpactSharpness of Edges and PointsMore than 20 Tests

*

Toys Testing LaboratoryFlammability Test:The standard specifies the categories of flammable materials prohibited in all Toys *

Toys Testing LaboratoryChemical Test:The standard specifies the requirements and test methods for the migration of the following toxic elements:* Mercury (Hg) Lead (Pb) Selenium (Se) Cadmium (Cd)

Chromium (Cr) Barium (Ba) Arsenic (As) Antimoney (Sb)

150 . (Full Member) ILAC .

*Vehicles Testing and Inspection Laboratory - Riyadh

To ensure the validity of the vehicle for the safety of the driver and road user and protect the environment through testing more than 50 items of the vehicle

150 . (Full Member) ILAC .

*Petroleum Testing Laboratory Dammam

Its aim to assure that the petroleum and petrochemical products produced in Saudi Arabia or imported products meet the highest standard utilizing internationally recognized testing methods such as SASO, ASTM and IP

150 . (Full Member) ILAC .

*Petroleum Testing Laboratory Dammam

The lab is using the latest technology for petroleum testing and state of art laboratory equipment and highly qualified staff to give accurate and reliable quantitative and qualitative analysis

150 . (Full Member) ILAC .

*Lubricants TestingAppearanceColour, ASTMDensity @ 15C, Kg/mFlashpoint, PM, C Fuel Dilution TestInsolubles, w/w %Sulfur Content, m/m%Acid Number, mg KOH/gTotal Acid Number, mg KOH/gTotal Base Number, mg KOH/gViscosity @ 40C, mm/sViscosity @ 100C, mm/sWater Content, v/v %Wear Metals, ppm

150 . (Full Member) ILAC .

*FuelsTestingAppearanceColour, Saybolt Density @ 15C, Kg/mDistillation of Petroleum Products Flashpoint, TC, CSulfur Content, m/m%Viscosity @ 50C, mm/sMetals, ppm

150 . (Full Member) ILAC .

*Other testsPour PointFreezing PointFoaming tendencyHeat ContentDensity by HydrometerPotential Gum

*

Local and International AccreditationSaudi MOC&I Cerified.ISO 17025 - SASO Saudi Arabia (SAC)UKAS/SGS ISO9001 - SwitzerlandIn a process of obtaining UKAS or DAkkS ISO/IEC 17025:2005International Proficiency Test

*

*Future PlansMOTABAQAH is already well advanced on work to construct a large scale complex in Riyadh and has also initiated work on similar complexes in both Dammam and Jeddah.

Future Laboratories will include:Construction MaterialsNDT.General MaterialsTextiles

Training Facilities and ProgramsMOTABAQAH is currently establishing Training Facilities and Programs in collaboration with the relevant Regulatory Organizations to ensure compliance with the appropriate legislation. In doing so MOTABAQAH will assist the Regulatory Authorities to achieve a transparent, efficient and world class product evaluation and compliance system throughout the region.

*

SUMMARYMOTABAQAH is a young, dynamic and rapidly growing company founded, owned and operated in Saudi Arabia that uses state-of-the-art technology to offer quality services to its customers. We will continue to grow and to provide socially responsible services and in doing so will form part of the growth of the technology base of both Saudi Arabia and the GCC.*

Saudi Specialized Laboratories Co.www.motabaqah.com Thank You*