محور الميكانيك والمواد

5.00-1.00الجلسة االولى للفترة /2019/3 6التأريخ: (5) قاعة/قسم ميكانيك القدرة

مسؤول المحور: أ.م.د.علي حسن صالح اختصاص البحوث : الميكانيكية مقرر الجلسة:أ.م.د. ماهر يحيى سلوم جية الجامعة التكنولو /رئيس قسم هندسة الطب الحياتي/رئيس الجلسة: أ.د.وسام كاظم حمدان

اسم الباحث ومحل انتسابه اسم البحث ID الوقت1.00 17 Exergy Analysis of Flat Plate Solar Air Heaters Having Obstacles and

Filled With Wire Mesh Layers

Afaq Jasim Mahmood (Middle Technical

University/ Institute of

Technology – Baghdad)

1.10 25 Effect of Ceramic Nanoparticles on Nanofluids Electrical Conduct

Conductivity Kadhum A. Jehhef (Middle Technical University)

Nabil J. Yasin (Middle Technical University)

1.20 26 Assessment the Effect of Nanofluid on Turbulent Heat Transfer and

Pressure Drop Bend Finned Tube Nabil J. Yasin1

Kadhum A. Jehhef2

2(Middle Technical University)

Zahraa A. Mohsen3

1,3(Middle Technical University/Engineering Technical

College –Baghdad)

1.30 27 Convection Heat Transfer Enhancement in Square Cross-Section with

Obstacle Using Nanofluids

Kadhum Audaa Jehhef1

Rehab H. Khanjar2

M A Siba3 1,2,3 (Middle Technical University/ Institute of Technology –

Baghdad)

1.40 34 Reducing the cooling load of a residence building by humidifying

ventilation air (experimental and numerical study) Mr. Atif Ali Hasan1

Dr. Kifah H. Hilal2

2(Middle Technical University/Technical Engineering College –

Baghdad)

Dr. Kadhum Audaa Jehhaf3

1,3(Middle Technical University / Institute of Technology)

1.50 62 Energy and Exergy Analysis of the Solar Radiation Incident over Iraq Fadhil Abdulrazzaq Kareem1

Noor Samir Lafta2

Doaa Zaid Khalaf3

1,2,3(Middle Technical University/Engineering Technical Collage -

Baghdad)

2.00 111 The effect of external helical ribs tube on the heat transfer and pressure drop

performance for multi – tube heat exchanger Ruaa N. Talib1

Nabil J. Yasi2

Mohammed A. Nasser3

1,2,3(Middle Technical University/Engineering Technical College –

Baghdad)

2.10 129 Evaluation of velocity distribution utilizing the helically coiled

tape in a conical diffuser Ehan Sabah Shukri Askari1

Afaf Ali Hussein2

1,2(Middle Technical University/Engineering Technical College –

Baghdad)

Ahmed Khadhier3

3(Ministry of Higher Education and Scientific Research)

2.20 140 Reducing Exhaust Gas Emissions of Stationary Diesel Engines Using

Water Bath Waleed Majeed1 , Ahmed Ibrahim2

2( Middle Technical University , Technical Engineering

College - Baghdad)

Muthana Abdullah3

1,3(Middle Technical University, Institute of Technology-

Baghdad)

2.30 178 Analysis of Wind Turbine Using QBlade Software Mustafa Alaskari ( University of

Baghdad,1Department of Energy Engineering )

Oday Abdullah ( Hamburg University of Technology

, Germany )

Mahir H. Majeed ( Al -Furat Al-Awsat Technical

University )

2.40 258 Characteristics Performance Prediction of PV Panel Using Cuckoo Search

Algorithm Ibtisam A. Hasan1 Mohammed Jawad2

Basma Abdullah3

1,2,3(University of technology , Electromechanical Engineering

Department)

2.50 233 Thermal Analysis of a Cooled Turbine Blade

Adel H. Ayaal1, Jalal M. Jalil1, Kassim K. Abbas1 1Department of Electromechanical Engineering, University of

Technology, Baghdad, Iraq

محور الهندسة المدنية والمعماري

9.00-12.00للفترة الثانية الجلسة /2019/3 7التأريخ: ( 5قسم ميكانيك القدرة :قاعة )

مسؤول المحور:أ.م.د. بيداء حسين مولى اختصاص البحوث: جيو قسم المدني/ الجامعة التكنولوجية /ا.م.د. عدي زكريا مقرر الجلسة: قسم المدني/جامعة النهرين /ا.م.د. اسماء ثامر ابراهيم الجلسة:رئيس

اسم الباحث ومحل انتسابه اسم البحث ID الوقت9.00 47 Developing the geometrical classification of non – cylindrical folds N N Haify (Middle Technical University /Institute of

Technology )

9.10 53 Experimental study for stabilizing clayey soil with eggshell powder and

plastic wastes

Mohammed N J Alzaidy

Assistant lecturer, Civil Engineering Dept., University of

Mosul, Iraq

9.20 216 The Performance of Shear Strength and Volume Changes of Expansive

Soils Utilizing Different Additives

Entisar Joudah Irshayyid (Al-Israa University

College)

Mohammed Fattah (University of Technology)

9.30 236 Heavy Metal Contamination in the Soils Collected From Al-

Muthanna Storage Site

Hisham M. Jawad Al Sharaa, Abdul Hameed M.

Jawad Al Obaid and Abdul Razzak T. Ziboon

Geomatics Eng. Div. Civil Eng. Dept. University of

Technology, Baghdad, Iraq

Environmental Research Center, University of

Technology, Baghdad, Iraq

9.40 272 Finite Element Analysis of Spread Footing Near Slops Basim Jabbar Abbas1, Hussein Yousif Aziz2,

Baydaa Hussain Maula3 and

Raid Tarik Alkateeb4

1,2 and 4, Muthanna University, College of

Engineering, Sammawa, Iraq

3 Middle Technical University, Institute of

Technology, Baghdad, Iraq

9.50 301 Geotechnical Properties of Clayey Soils Induced by the Presence of

Sodium Chloride

Kawther Yaly Hussain (University of Technology)

Falah H. Rahil (University of Technology)

Narjis Sabih Abbas (University of Technology)

10.00 341 Effects of organic warm mix Asphalt Additives on Marshall Properties A J Addahhan (Al - Mustansiriya University College

of Engineering , Highway and Transportation

Department)

M Y Fattah (University of Technology , Civil

Engineering Department)

N M Asmael (Al-Mustansiriya University, College of

Engineering , Highways and Transportation

Department)

محور الميكانيك والمواد

5.00-1.00للفترة لجلسة الثالثةا /2019/3 7التأريخ: (5) قاعة/قسم ميكانيك القدرة

مسؤول المحور: أ.م.د.علي حسن صالح اختصاص البحوث : الميكانيكية .د. حسن عبد الرسول عبد الهادي ممقرر الجلسة: رئيس الجلسة:أ.د. نصري صالح محمد

اسم الباحث ومحل انتسابه اسم البحث ID الوقت1.00

214 Engine performance and emission formation of a diesel engine

fueled with biodiesel B15 at different injection timings

Mohanad Aldhaidhawi1

Muneer Najee2 Mohammad Humid3

1,2,3(Al-Furat tAl-Awsat Technical University)

1.10 266 Experimental Study of Flat Plate Solar Collector Performance with

Twisted Heat Pipe

Prof. Dr. Majid H. Majeed (Middle Technical University)

Basil N. Merzha (Al- Furat Al-Awsat Technical

University)

Dr. Fouad A. Saleh (Mustansiriyah University)

1.20 278 Double – Pass Solar air Heater (DP-SAH) utilizing Latent Thermal

EnergyStorage (LTES)

Salah M. Salih (Al-Furat Al-Awsat Technical University, Engineering

Technical College – Al-Najaf)

Jalal M. Jalil (University of Technology)

Saleh E. Najim (University of Basra)

1.30 282 Numerical Study for Vibration Analysis of Hole Flanged Rectangular

Plate Sami Ali Nama1

Sulaiman M. Khazaal2

1,2 (Middle Technical University/Engineering Technical

College–Baghdad)

1.40 286 Influence of Adding CuO and MoS2 Nano-particles to Castor Oil and

Moulding Oil on Tribological Properties

Asmaa Abdul-Sattar Noori1

Haidar Akram Hussein2

Nasri S. M. Namer3

1,2,3(Middle Technical University, Engineering Technical College /

Baghdad)

1.50 310 Development product of a multi-layer solar distillation system

connected to tubular solar collectors by using gravel Muntadher. H. Abed1

1(Middle Technical University)

Muna S-Kassim2

Fouad A. Saleh3

2,3(Mustansiriyah University / Department of Mechanical

Engine

ering) 2.00 317 Entropy generation and natural convection in a wavy – wall cavity filled

with a nanofluid and containing an inner solid cylinder Mohammed Hussein S. Alnajem1

Ammar I. Alsabery2

1,2(The Islamic University-College of Technical Engineering)

Ishak Hashim3

3(Universiti Kebangsaan Malaysia, Faculty of Science &

Technology) 2.10 338 Effect of Micro-Channel Technique on Solar Collector Performance Jalal M. Jalil (University of Technology , Electromechanical

Engineering Department)

Nashwan A. Abdulkadhi (University of Technology ,

Electromechanical Engineering Department)

2.20 358 Numerical verification for different types of curved baffles as stratifiers

in solar thermal storage tank

Ali A.Abbas Hashim1

Adnan A. Abdulrasool2

1,2(AL-Mustansiriyah University, Department of Mechanical

Engineering)

2.30 365 CFD Modelling for flow and heat transfer in a closed Thermosyphon

charged with water – A new observation for the two phase interaction Alaa A B Temimy1, Adnan A Abdulrasool2 1Training and Power research office / Ministry of

Electricity / Iraq.

2 Mechanical Engineering Department / Faculty of

Engineering / Al-Mustansiriayah University/ Ministry

of Higher education and scientific research / Iraq

2.40 386 Novel of Water With (CeO2-WC) and (SiC-WC) Nanoparticles Systems

For Energy Storage and Release Applications

Aseel Hadi1 , Farhan Lafta Rashid2, Hasan

Qahtan Hussein3, and Ahmed Hashim4 1 Babylon University, Materials Engineering College,

Ceramics and Building Materials Department, Iraq

2 University of Kerbala, College of Engineering,

Mechanical Engineering Department, Iraq

3University of Kerbala, Iraq

4 Babylon University, College of Education for Pure

Sciences, Physics Department, Iraq

2.50 404 The \ Radius Size Variation Effects on Strength of AA6061-T6 and

AA6061-O

Ali Saleh (Middle Technical University/ Institute of

Technology-Mechanical Technologies Department)

محور هندسة تكنولوجيا المعلومات واالتصاالت

5.00-1.00الجلسة االولى للفترة /2019/3 6التأريخ: (2) قاعةقسم االلكترونيك :

مسؤول المحور: أ.م.د.عدنان حسين علي المعلوماتاختصاص البحوث : تكنولوجيا مقرر الجلسة:أ.م.د. ثامر رشيد سعيد قسم الكهرباء /الجامعة التكنولوجية /رئيس الجلسة: أ. م.د. جواد كاظم علي

اسم الباحث ومحل انتسابه اسم البحث ID الوقت 1.00 19 Different Shape and Color Targets Detection Using Auto

Indexing Image Computer Vision system in

D A Taban (Mustansiriyah University , College of Science)

A A Al-Zuky(Mustansiriyah University , College of Science )

A H AlSaleh (Mustansiriyah University,College of Science )

H J Mohamad (Mustansiriyah University,College of Science)

1.10 40 Improvement of Image Steganography Scheme Based on LSB

Value with Two Control Random Parameters and Multi-level

Encryption

Mohammed Mahdi Hashim1 , School of Computing, Facility of Engineering, University Technology Malaysia, Johor Bahru, Malaysia Faculty of Engineering, Uruk University, Baghdad, Iraq Ali Abdulwahhab Abdulrazzaq2,Technical Instructors Training Institute, Middle Technical University, Baghdad, Iraq Mohd Shafry Mohd Rahim1 UTM (IRDA) Digital Media Center, Faculty of Computing, University Technology Malaysia, Johor Bahru, Malaysia Mustafa Sabah Taha, Basrah Oil Training Institute , Ministry of Oil, Iraq School of Computing, Facility of Engineering, University Technology Malaysia, Johor Bahru, Malaysia Hiyam Nadhim Khalid, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 UKM , Bangi, Selangor, Malaysia Sameer abdulsattar lafta, Technical Instructors Training Institute, Middle Technical University, Baghdad, Iraq

1.20 41 Combination of Steganography and Cryptography: A Short Survey

UTM, UKM, ISIS(MTU)

Mustafa Sabah Taha1, School of Computing, Facility of Engineering, University Technology Malaysia,

2-Mohd Shafry Mohd Rahim1, School of Computing, Training Institute )

3-Sameer abdulsattar lafta, Middle Technical University, Technical Instructors Training Institute, Baghdad, Iraq,

4- Mohammed Mahdi Hashim1, School of Computing, Facility of Engineering, University Technology Malaysia, Johor Bahru, Malaysia.

5- Hassanain Mahdi Alzuabidi, Ferdowsi University of Mashhad Faculty of Engineering Computer Engineering Department.

1.30 63 A modified Smart Controlling and Monitoring Scheme of Three

Phase Photovoltaic Inverter rely on LoRa Technology Author

Raad Farhood Chisab, Department of electrical techniques,

technical institute-Kut, Middle Technical University

(MTU), Iraq,

MarwaThamer ali, Department of electrical techniques,

technical institute-Kut, Middle Technical University

(MTU), Iraq

Mohannad Jabbar Mnati, Department of Electronic

Technology, Institute of Technology-Baghdad, Middle

Technical University, Baghdad, Iraq,

Alex Van den Bossche, Department of Electrical Energy,

Metals, Mechanical Constructions and Systems, Ghent

1.40 80 The Use of Nanocomposite Au/ Fe2H2O4 –GO Based on Surface

Plasmon Resonance to Detect Toxic Arsenic(V) in Aqueous

Solution

1-Sura AL-Rekabi (Middle Technical university). 2-

Ali Alwahib (University of Technology).

3-MOHAIMAN SHARBA (Middle Technical university)

1.50 95 Human action Recognition using a corners and blob detector with

different classification methods Zahraa Salim David, Amel Hussain Abbas

Mustansiriyah University,Iraq

هندسة تكنولوجيا المعلومات محور

12.00 -9.00 للفترة الجلسة الثانية /2019/3 7التأريخ: (2) قاعةقسم االلكترونيك :

مسؤول المحور: أ.م.د.عدنان حسين علي اختصاص البحوث : تكنولوجيا المعلومات بغداد/معهد تكنولوجيا/ر. قسم االلكترونك/أ.م.د.فائزة عباس عبدمقرر الجلسة: الكلية التقنية الكهربائية/كامل غركان د.صادقرئيس الجلسة: أ.

اسم الباحث ومحل انتسابه اسم البحث ID الوقت 9.00 145 Estimating the consuming resources of IEEE 802.16e cell in case

of video conference application

1-Firas Alsharbaty (Mosul university).

2-Omar Ali (Mosul University).

3-Yazen Sheet (Mosul University)

9.10 197 OFDM BASED FFT COMPARED WITH OFDM BASED WAVELET

TRANSFORM ,STU, AMARA TECHNICAL INSTITUTE Dr WAEL ZAYER / (Amara Technical Institute)

9.20 218 Study on known models of NB-IoT Applications in Iraqi

environments, MTU, Institute of Applied Arts Dr. Wael Zayer (Amara Technical Institute)

9.30 229 Various Types of Skin Tumors Lesion Medical Imaging

(STLMI) of Healthy, Al-Furat Al-Awsat Technical University

1-Mohanad Aljanabi1,(Al-Furat Al-Awsat Technical

University Najaf )

2-Fadhel A. Jumaa1( Al-Furat Al-Awsat Technical University

Najaf)

3-Ahmed Obaid Aftan1, (Al-Furat Al-Awsat Technical

University Najaf)

4-Muhammed Salah Sadiq Alkafaji1, (Al-Furat Al- Awsat

Technical University Najaf).

5-Zaid H. Al-Tameemi1, (Al-Furat Al-Awsat Technical

University Najaf )

6-Dalya H. Al-Mamoori1, (Al-Furat Al-Awsat Technical

University Najaf)

7-Nadia alanı (Ministry of Science and Technology Phy.)

9.40 240 Design Advanced Algorithm of the Single Dimension for

Resolve the Electrostatic Al-Nahrain University

Dr. Hussein Khamees (Al - Nahrain University)

9.50 265 Remote Heart Rate Monitor System using Node Mcu

Microcontroller and easy pulse sensor v1.1 Salam khalaf Abdullah (Middle Technical University / Institute

of Technology-Baghdad)

10.00 306 Study of heavily thulium-doped fiber amplifier for optical

telecom at 2μm

Mustafa Khamis (Baqubah Technical institute

10.10 212 Implementation of New Combiner for Indoor UWB Wireless

Rate Receiver Dr. Rashid Ali Fayadh1, Maham Kamil Naji2, Suhad

Hasan Rhaif3, Dr. Adnan Hussein Ali3 1Department of Computer Engineering, Middle Technical

University, College of Electrical Engineering Techniques,

Aldora Street, Baghdad, Iraq 2Electronic Technique Department, Institute of Technology,

Middle Technical University, Baghdad, Iraq 3Electrical Techniques Department, Technical Instruction

Training Institute, Middle Technical University, Baghdad, Iraq

10.20 400 Design and Implementation WSN Based on Raspberry Pi for

Medical Application Bahaa Fais Noory Mohsin Alabassby, Dr. Janan Fazl

Mahdi Dr. Mohammed AboudKadhim

Middle Technical University

تكنولوجيا المعلوماتهندسة محور

5.00-1.00 للفترة الجلسة الثالثة /2019/3 7التأريخ: (2) قاعةقسم االلكترونيك :

مسؤول المحور: أ.م.د.عدنان حسين علي اختصاص البحوث : تكنولوجيا المعلومات الجامعة التكنولوجية /مقرر الجلسة: م.د. اخالص كاظم حمزة م. رئيس قسم الكهرباء للشؤون العلمية والدراسات العليا /رئيس الجلسة: أ.م.د. عباس حسين عيسى

اسم الباحث ومحل انتسابه اسم البحث ID الوقت 1.00 316 Design and Performance of MC-CDMA Transceiver based LDWT –

OFDM in Flat Fading Channel, Raya M (Middle Technical University

Raya Majid Alsharfa Middle Technical University)

1.10 325 Design and Simulation of the Fourier Transform Beam

Propagation Method in Different Optical Waveguides,

zina abdulateef ahmed , MTU. IoT

1.20 372 Use of a new approach to automated break transposition cipher system, 1-Ahmed Shibeeb (Middle Technical University).

2- Mohammed Hussein (Al-Mustansiriyah

University)

1.30 401 Wireless Sensor Networks Improvement using LEACH Algorithm

Sadeer Rasheed Ahmed1 (1Neelain University- Sudan)

Ass. Prof .Dr. Mohammed Aboud Kadhim2 2Middle Technical University, Institute of Technology

Baghdad)

Dr.Tarek Abdulkarim3 (Neelain University- Sudan)

1.40 402 Design and Analysis of Erbium Doped Fiber Amplifier for Optical Communication

Network raya al sharf a (Middle Technical University)

1.50 403 IMPROVEMENT IVESTIGATION OF THE TCP ALGORITHMS WITH

AVOIDING NETWORK CONGESTION BASED ON OPNET

1-Dr Adnan Hussein Ali (Middle Technical University),

2-Haeeder Noman (Middle Technical University),

3-Marwa Mahdi Kareem (Al-Israa College University) 4-Dr. Ali Abdulwahhab (Middle Technical University)

البحوث الفديوية

5.00-1.00الجلسة االولى للفترة /2019/3 6التأريخ: ((4قاعة/مركز الحاسبة

فراس هاشم كمرمقرر الجلسة:أ.م.د. بغداد /الكلية التقنية الهندسية/ خضير جعيول جديعد.م.أ. رئيس الجلسة:

الجامعة التقنية الوسطى /غانم صدام حسنمسؤول المحور: م.د.

اسم الباحث عنوان البحث ID الوقت1.00 208 Experimental Study of a Rectangular Storage

Solar Collector with a numerical analysis

Omer K. Ahmed, Raid W. Daoud and Omer

T. Mahmood (Northern Technical )

1.10 355 Selecting The Most Efficient Bearing of Wind

Turbing Gearbox Using (Analytical Hierarchy

Process) Method "AHP

Tahseen Ali Mankhi1 Stanisław Legutko2

Jasim H AL-Bedhany3 (University of Misan , Engineering College )

Abdulmuttalib A Muhsen4 1,2,3 (Poznan University of Technology,

Faculty of Machines and Transport

1.20 390 Numerical Stress Analysis in Adhesive Joints

Under Thermo – Mechanical Load Using Model

With Special Boundary Conditions

Nawres J. Al-Ramahi (Luleå University of Technology , Division of

Materials Science, Institute of Technology / Baghdad )

Roberts Joffe (Luleå University of Technology , Division of

Materials Science, Swerea SICOMP AB)

Janis Varna (Luleå University of Technology , Division of Materials

Science)

1.30 398 Effect of Static Spark Timing on the Performance

and Emissions of a Spark Ignition Engine Using

CNG

Mohamed R. El- Sharkawy1, 2, Mina B. R. Abaskharon1, Ali M. Abd-El-

Tawwab1, Fawzy M. H. Ezzat1

1Minia University, Faculty of Engineering, Automotive and Tractors Eng. Dept. Minia, Egypt 2Al-Amara College University, Engineering of Technical Mechanical Power Department,

Maysan, Iraq

1.40 97 Enhancement of Engine Performance with High

Blended Diesel-Biodiesel

Fuel Using Iso – Butanol Additive

Ahmed H. Ahmed1

Obed M. Ali2

Awad E. Mohamme3

Raid W. Daoud4

1,2,3,4(Northern Technical University, Kirkuk)

Thamir K. Ibrahim5 ( Tikrit University)

1.50 366 Evaluation of Diesel Engine Performance with

High Blended Diesel- Biodiesel Fuel from Waste

Cooking Oil

Obed M. Ali (Northern Technical University, Kirkuk

2.00 151 Human Gait Recognition Based on Feature

Extraction of Support Vector Machine and Pattern

Network Algortim

Shahla Abd Qader (Technical Institute/Northern Technical University)

البحوث الفديوية

12.00-9.00للفترة الثانيةالجلسة /2019/3 7التأريخ: 4قاعة/مركز الحاسبة

معهد تكنولوجيا بغداد/علي ياسر جابرمقرر الجلسة: م.د. واثق رافع عبدرئيس الجلسة: م.د.

أ.د. محمود فرحان مصلح مسؤول المحور:

9.00 92 Enhancement of K-Best Sphere Detection

algorithm Performance in MIMO Systems

Dr Mohammed Sulttan/ University of Technology/

Electromechanical Engineering/ Baghdad

9.10 173 Real – Time Environmental Control System for

Disability Access Under Node – MCu Plat Form Mohammad J.M Zedan (Nineveh University)

Mohammed A.M. Abdullah (Ninevah University, Newcastle

University)

Mamoon Al Jbaar (Nineveh University)

9.20 279 Modeling and simulation of electrolyte pH change

in conventional ISFET using commercial Silvaco

TCAD

1Salehuddin and F. 1AS Mohd Zain, 1,2Ahmed M. Dinar

Faculty of Electronics and Computer Engineering, Universiti Teknikal Malaysia 1

Melaka (UTeM), Malacca, Malaysia; 2Computer Engineering, University of Technology, Baghdad, Iraq

9.30 375 PAPR REDUCTION IN OFDM SYSTEM

USING ADAPTIVE HYBRID TECHNIQUE

Ali jasim ghaffoori1

1Department of Electrical Power Techniques Engineering, Al-

Ma'moun University College, Baghdad, Iraq.

البحوث الفديوية

5.00-1.00للفترة الثالثةالجلسة /2019/3 7التأريخ: ( (4قاعة/مركز الحاسبة

الهندسية الكلية التقنية/م.د.حيدر عبد الهادي عبد الواحدرئيس الجلسة:

مصلح فرحان محمود. د.أمسؤول المحور: معهد التكنولوجيا/ بغداد /اسماعيل حيدر م.د. الحسن مقرر الجلسة:1.00 269 The architectural variables (shape, function, and

durability) and their impact in the architectural

design to guarantee the design efficiency

Nidaa N Majeed, Mohammed S Oleiwi and Rushdi A Yaseen

(Technical Institute of Anbar, Middle Technical University)

1.10 98 Quality Management to continuous improvements

in process of Ready Mix Concrete production Alaa Qasim AL-SAEDI (Poznan university of technology)

1.20 314 Influence of stakeholder management and

communications management in choosing of the

best product achieve quality by Analytic

Hierarchy Process method

Alaa AL-Saedi1 and Jerzy Pasławski1

1Poznan University of technology/Faculty of Civil and Environmental

Engineering, Construction Technology Management, Jana Pawła II,

61-139Poznan, Poland

1.30 393 Nonlinear Finite Element Analysis of Concete Beam

Reinforced with Fiber Reinforced Polymer (FRM) Saad Sh Sammen, S N Al Karawi

(Diyala University , College of Engineering)

1.40 344 Applications of GIS for Bridges Maintenance

Service S Wattan (University of Baghdad , College of Engineering)

M Al-Bakri (University of Baghdad , College of Engineering)

محور الهندسة الكهربائية وااللكترونية

5.00-1.00الجلسة االولى للفترة /2019/3 6التأريخ: ( 3) قسم االلكترونيك : قاعة

مسؤول المحور: أ.د.محمود فرحان مصلح اختصاص : كهرباء والكترون

مسيب الكلية التقنية ال /فاضل عباس جمعة م.د. أ.مقرر الجلسة: عميد معهد تقني كوت /رئيس الجلسة: أ.م.د. مهدي فرحان بنية

اسم الباحث ومحل انتسابه اسم البحث ID الوقت1.00 29 Wideband Square Sierpinski Fractal Microstrip Patch Antenna for

Various Wireless Applications

M A Kadim a, M F Mosleh b and S A Shandal b* a Institute of Technology, Middle Technical University,

Baghdad, Iraq b Electrical Engineering Technical College, Middle

Technical University, Baghdad, Iraq

1.10 31 Integrated solar thermal combined cycle for power generation in Iraq

Khalidah A J Al-Qayim Department of Oil & Gas Refinery Engineering, Al-Farabi

University college, Aldorrah Masafi St., Baghdad, Iraq

1.20 42 Improving of Maximum Power Point Tracking for Photovoltaic Systems

Based Swarm Optimization Techniques Abbas Hussien Miry (Almustansiriyah University)

Ali Mary (University of Baghdad)

Mohammed Miry (University of Technology)

1.30 52 A New Techniques to Calculate The Efficiency of Electric High Voltage

Network in Basra Wathiq Rafa Abed (Middle Technical University

/Institute of Technology)

Qais Mohammed Aish (Middle Technical University

/Institute of Technology) 1.40 55 Secure and efficient image retrieval based on global features

Aqeel A Yaseen1*, Murtad Hussein Sabri1, and

Haitham Ali Hussain21 Department of Technical

Computer Engineering, Faculty of Engineering, Al

Kunooze University College, Basrah, Iraq. 2

Accountant Techniques Department, Management

Technical College of Basrah, Southern Technical

University, Basra, Iraq

1.50 71 Deformation Detection for Car’s parts Products Using 2D/3D Image

Processing Algorithms Murthad Sabri

(Al-Kunooze University College)

Aqeel Yaseen (Al-Kunooze University College)

Mustafa Zuhaer Nayef (Knowledge University)

2.00 109 Fractal Sierpinski Square Patch Antenna for GPS Applications Riyadh Ahmed (University of Diyal)

2.10 117 Selective Branch Prediction Schemes Based on FPGA MIPS Processor

for Educational Purposes Hadeel Mahmood

(Electrical Engineering Technical College)

Safaa Omran (Middle Technical University)

2.20 118 Design System of Optical Heterodyne Detection Based on Temperature

Sensor

D A Resen1, S A Kadhim2, A I Mahmood2 and

A T Lateef2

1 1Middle Technical University, Institute of Technology,

Surveying Department, Baghdad, Iraq. 2Laser & Optoelectronics Research Center, Ministry of

Science &Technology, Iraq.

2.30 147 Thermal Analysis of a Three-Phase Induction Motor with Frame Design

Considerations

Afrah Thamer Abdullah, and Dr. Amer Majbel Ali Electrical Engineering Department, Faculty of

Engineering, Mustansiriyah University, Baghdad, Iraq

2.40 173 Real-time Environmental Control System for Disability Access under

Node-MCU Platform Mohammad Jassim, Mamoon A Al-

Jbaar and Mohammed A M Abdullah Computer and

Information Engineering Department, Ninevah University, Mosul, 41002, Iraq. College of Electronics Engineering,

Ninevah University, Mosul, 41002,

محور الهندسة الكهربائية وااللكترونية

12.00-9.00للفترةثانية الجلسة ال /2019/3 7التأريخ: ( 3) قسم االلكترونيك : قاعة

مسؤول المحور: أ.د.محمود فرحان مصلح اختصاص : كهرباء والكترون

جميل كاظم عبد / الكلية التقنية الهندسية الكهربائية م.د. أ.مقرر الجلسة: .د. عادل احمد عبد / الكلية التقنية الهندسية الكهربائية رئيس الجلسة: أ

اسم الباحث ومحل انتسابه اسم البحث ID الوقت9.00 183 The effect of sand and pipes on the temperature distributions of the

underground cable Ibtisam Hasan (University of Technology)

Sahar Alsakini (University of Technology)

Mohammed Saadi (University of Technology)

9.10 188 Step Voltage Regulator and Capacitor Placement to Improve the

Performance of Rural Electrical Distribution Systems by CYME

Program

A K Hamza1 and M F Bonneya2 1 Meddle Technical University 2 Meddle Technical University

9.20 209 An Android Smart Application for An Arduino Based Local

Meteorological Conditions Data Recording Nadhir Ibrahim Abdulkhaleq (Middle Technical University)

Ihsan Jabbar Hasan Al Nasery(Middle Technical University)

Nahla Abdul Jalil Al Chalaby(Middle Technical University)

Mohannad Jabbar Mnati (Ghent University)

9.30 211 NEURAL NETWORKS FOR SYNCHRONOUS GENERATOR

FAULT DIAGNOSIS

Asaad Al-Maliki (Institute of Technology)

Atheer Herez (Institute of Technology)

9.40 219 Performance Selection Between Different Control Algorithms in

Regulating DC- Voltage

Muhanad Almawlawe (Alqadisiyah University)

9.50 244 Using PC and Microcontroller to Implement Lab kits for Educational

Purpose

Marwan Al-yoonus (University of Mosul)

10.00 246 Direct Use of Solar PV System Generation with Minimum Batteries

Capacity Muayad Hasan Radhi1,4 Emad Jaleel Mahdi 2,4 and

Dhia Jalil Hussein 3,4

Renewable Energy Directorate, Ministry of Science

and Technology, Baghdad, Iraq

10.10 268 Generating High Voltage DC with Cockcroft-Walton Voltage Multiplier

for Testing Locally Assemble Electric Field Sensor Dalya Al-Mamoori (Al-Furat Al-Awsat Technical University)

Omar Neda (Sunni Diwan Endowment)

Zaid Al-Tameemi (Al-Furat Al-Awsat Technical University)

Mohanad Ali (Al-Furat Al-Awsat Technical University)

Ali Alobaidi (Babylon Technical Institute, Al-Furat Al-Awsat Technical University)

10.20 279 Molding and Simulation of Electro light PH Change in Conventional

ISFET Using Commercial Silvaco TCAD

Ahmed Musa Dinar (Technical Universiti of

Malaysia Malacca(UTeM)

Anis Suhaila Mohd Zain (Technical Universiti of

Malaysia Malacca(UTeM)

10.30 287 Optimal Sizing and Location of Units for Enhancing Voltage Profile and

Real Power Losses Based On PSO Technique

Zaid H. Al-Tameemi1, Omar Muhammed Neda2,

Fadhel A. Jumaa1 ,Dalya H. Al-Mamoori1

,Mohanad H. Aljanabi1, Jasim Mohmed Jasim1 1Electrical Power Engineering, Al-Furat Al-Awsat

Technical University ,Najaf, Iraq.

2Depertmant of Engineering Affairs, Sunni Diwan

Endowment, Bagdad, Iraq.

محور الهندسة الكهربائية وااللكترونية

5.00-1.00للفترة ثالثالجلسة ال /2019/3 7التأريخ: ( 3) قسم االلكترونيك : قاعة

مسؤول المحور: أ.د.محمود فرحان مصلح اختصاص : كهرباء والكترون

الكلية التقنية الكهربائية /مقرر الجلسة:أ.م.د. أحمد رشيد عاجل رئيس الجلسة: أ.م.د. انعام ابراهيم علي

اسم الباحث ومحل انتسابه اسم البحث ID الوقت1.00 289 Design and Implementation Smart Monitoring and Controlling System

of Three-Phase Photovoltaic Inverter Based on LoRa

Mohannad Jabbar Mnati (Ghent University)

Aktham Hasan (Middle Technical University, Baghdad)

Adnan Ali (Middle Technical University)

Dimitar V. Bozalakov (Ghent University)

Alex Van den Bossche (University of Gent Belguim)

1.10 294 Security Technology for Realistic Measurements with a Distinction on

the Speech Recognition in Arabic and English Language Using LMS,

Spectral subtraction and A/D Conversions Techniques.

Ismail abduljabbar hasan Muhanad.A. ahmed

Hassan Hayder Dawood Department of Electrical Techology, Technical Institute of

Baghdad, Middle Technical University (MTU) Baghdad/Iraq

1200 296 Design and Analysis of Frequency-Reconfigurable Microstrip Antenna

using Multiple ParasiticPatches

Mohammad Zidan (Technical Institute/AlAnbar)

1.30 302 Highly Accurate Water Level Measurement System Using a

Microcontroller and an Ultrasonic Sensor

Saleem Latteef Mohammed (Middle Technical

University/Electrical Engineering Technical College)

Ali Al-Naji ( University of South Australia)

Mashael M. Farjo (Middle Technical

University/Electrical Engineering Technical College)

Javaan Chahl ( University of South Australia)

1.40 304 Improve Protection Concept of Transmission Line Based on Power

Lines Carrier for microgrid

Ali Hadi Abdulwahid , Diyah K. Shary2 Department of Electrical Power Engineering Techniques;

Engineering Technical College; Southern Technical University;

1.50 315 A New Approach of Mho Distance Relay for Transmission Line

Protection

Abdullah Hamed (Middle Technical university)

2.00 318 Performance Improvement of OFDM System Using New Scrambling

Technique with Precoded Methods

MUNTADHER KADHIM ABDULLAH1, ALI

JAWAD IBADA1 1 Computer Technical Engineering Department,

College of Technical Engineering,

The Islamic University, Najaf, Iraq

2.10 324 A New Technique To Sense Humidity Based on Optical Heterodyne

detection

D A Resen1, S A Kadhim2 and A T Lateef2 , A I

Mahmood2

1Middle Technical 2Laser & Optoelectronics Research

Center, Ministry of Science &Technology, Iraq

2.20 332 An Optimal FACTS Device Allocation for Improving the

Power Loss Factors in IEEE 9 Bus System

Mustafa N Dawood1 and Dr. Jmeel K Abd1

1Electrical Power Engineering Techniques, Middle

Technical University, Baghdad, Iraq

محور الهندسة المدنية والمعماري

1.00-5.00الجلسة االولى للفترة /2019/3 6التأريخ: ( 7:قاعة ) المدني قسم بيداء حسين مولىمسؤول المحور: أ.م.د. اختصاص البحوث: تخطيط حضري

هيئة التعليم–م. المكتب االستشاري / فراس خيري.م.دأ. مقرر الجلسة: عميد مركز التخطيط الحضري واألقليمي/جامعة بغدادا.م.د.عبد الحسين عبد علي/ رئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت

1.00 16 The Role of the information technique in Sustainabal Strategic Planning

_Nejaf Provenance as case study

Dr. Amna Hussain Sabree Ali (University of Baghdad ,

Urban Regional Planning Center for post graduate)

1.10 23 Evaluate the efficiency of the Iraqi city to overcome the challenges of

sustainable smart cities

Dr.Hayder Abdulhadi Alkanaani (Middle Technical

University / (institute of technology - Baghdad)

Dr. Khaleel Husain (Ministry of Justice/Iraq)

1.20 59 Place Energy and Urban Scene Drama in Iraqi City Centers

(Case study Rusafa district in Baghdad- Iraq)

Malk Jamal Hamzah¹ and Dr. Mustafa AbdulJalil².

¹M.Sc. Student, architect, urban and regional planning

center for post graduate studies, university of Baghdad.

²Assistant professor, urban and regional planning

center for post graduate studies, university of Baghdad.

1.30

66 Sustainable engineering factors Affecting the generation of dwelling

Solid Waste in some Residential neighborhoods in the Karkh Region of

Baghdad City in 2014

Kareem Hassan Alwan (middle technical university)

Maarib Youssef Hamden (University of Baghdad

1.40 68

The Concept of Socio Hydrology and Spatial Organization of Human

Settlements (An Analytical Study of Rural Wasit District at Wasit

Governorate)

Harth Hazim Aziz Al Bashagha¹ and Dr.

Mustafa AbdulJalil/urban and regional planning

center for post graduate studies, university of Baghdad.

2 Imam Hussein Holy Shrine, Karbala, Iraq. 3

Department of Civil Engineering, College of Engineering, University of Warith alanbiyaa, Karbala, Iraq.

1.50 76 New attempted moving towards understanding urban system behaviour Safiya Mahdi Khalil, and Mustafa Abduljalil

Ebraheem. (Center of Urban and Regional planning,

Baghdad University)

2.00

124 Transport Systems and the Impact of the Sustainable Activities on the

Permanence of Existing Cities

D M Al-Zubaidy (Al-Farabi University

College,Architecture Department)

F A Majed (Al-Farabi University College,Architecture

Department)

S A Hassan (University of Baghdad, Architecture

Department)

2.10

152 Study the importance of intelligent transportation systems in

solving congestion problems within the city and conservation

of the environment

Dr. Intissar Kadori Jumaah (Middle Technical

University-Technical College/Baghdad)

Dr. Thaer Mohammed (Middle Technical University-

Institute of Technology )

Seda Sarkis Mesrop (Middle Technical University-

Institute of Technology )

2.20

185 Development of Vehicle Queue Model for Selected

Signalized Intersections at CBD in Sulaymaniyah City

Saad M Khaleel1, Gandhi G Sofia2 and Ali J

Kadhim 1 Technical Surveying Department, Baquba Technical

Institute, Middle Technical University, Diyala, Iraq. 2

Highway and Transportation Dept., College of

Engineering Al-Mustansiriyah University, Baghdad,

Iraq

2.30 255 Education of Sustainable Manufacturing in Curriculums:

Evidence from Iraqi Colleges

Yousif Ibrahim (University Utara Malaysia)

Susan Abdulameer (UUM)

Norsiah Hami (University Utara Malaysia (UUM))

Noorulsadiqin Yaacob (University Utara Malaysia)

Siti Norezam Othman (Universiti Utara Malaysia

2.40 349 Urban renewal of the historic center of Rusafa

Dr. Amer Shakir Alkinani

Assistant professor, urban and regional planning center for

postgraduate studies, University of Baghdad.

2.50 394 Urban Transport and G Dynamic Indicators in Diwaniyah City Baydaa Abdul Hussein B. (University of Kufa , College of

Physical Planning, Environmental planning Department) Dr. Kareem Hassan Alwan ( Middle Technical University,

Institute technology – Baghdad) Dr. Moheeb Kamel Fleeh

(Baghdad University , The Center of Urban and Regional

Planning for post graduate )

محور الهندسة المدنية والمعماري

9.00-12.00للفترة ثانيةالجلسة ال /2019/3 7 التأريخ: ( 7:قاعة ) المدني قسم بيداء حسين مولىمسؤول المحور: أ.م.د. المعماري اختصاص البحوث:

القسم المدني/الكلية التقنية الهندسية/انتصار قدوري .د.م.امقرر الجلسة: سعد حسن محمد علي/ كلية الهندسة/الجامعة المستنصرية .د.ارئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت9.00 45 Value as a Criticism Strategy for Contemporary Local Architecture Products Basim Hassan Hashim (University of Technology).

Shaimma M. Hamza Al Hayabi (university of

Mustansiriyah)

9.10 58 Indicators for Sustainable Housing Zaineb Salman Shama (student), Dr. Jamal Baqer

Motlak ( Center of Urban and Regional Planning,

University of Baghdad, Iraq

9.20 103 Evaluation of concrete compressive strength in CFST column using

ultrasonic bulk waves: A simulation study

Nadom K. Mutlib ( Department of Civil techniques

, Technical Institute of Anbar , Middle Technical

University, Baghdad, Iraq)

9.30 105 Sustainability of architectural heritage elements “An Applied Study of

the Basra City from the Establishment to the Present”

1-Armin Sarkis Markaryan1 and 2-Batool Moafaq

al-Zaidi/1 University of Basra College of engineering

Architecture Department. 2 Middle technical university

College of engineering Architecture Department

9.40 126 The Impact Of Climatic Elements On Formal Optimization for

Educational Space ( Evaluation of the reality of local school buildings in

Baghdad )

Maysaa Moffeq Abdulla and Abdulrehman (Mosul University , Architecture Engineering

Department)

9.50 134 Design objective as an effective factor for sustainable environment

Dr. Mohammed jarallah tewfik (Middle Technical

University)

10.00 139 Towards a more relevance university campus with its biosphere based

on LEED Case study: Technology Institute campus/ Baghdad

Hiyam Majeed Jaber Al- Bakry (Mustansiriyah

University)

Suha Mnati Abbas (Institute of Technology-

Baghdad)

10.10 141 The Role of Multi-Story Structural Building Systems on Reducing

Embodied Energy Consumption and Carbon Emissions

Susan Hasan (Al-Nahrian unversity)

Jamal Abed al Wahid Jassim (middle technical

university)

10.20 167 Eco-city applications and standards in one of the Iraqi cities

Hala Ali and , Nada Khalifa

(Baghdad university)

10.30 199 Sustainable Design Treatments for Thermal Range Ass. Prof. Dr. Ahmed Hashim El-Eqapy (University

of Technology)

Dr. Basim H. Hashim Al-Majedy (University of

Technology)

Moheamen Basim Ibrhim (University of Technology)

10.40

200 Smart city planning and sustainable development Ali Abdulsamea Hameed (University of baghdad)

10.50 78 Effect of Steel Fiber on Ultrasonic Pulse Velocity and Mechanical

Properties of Self Compact Light Weight Concerete

Ahmed S D AL-Ridha, Ali Kadhim Ibrahim,

Hayder Mohammed Al-Taweel (Al Mustansiriya

University)

Layth Sahib Dheyab (Consultant Engineer)

محور الهندسة المدنية والمعماري

1.00-5.00للفترة ثالثة الجلسة ال /2019/3 7 التأريخ: ( 7:قاعة ) المدني قسم بيداء حسين مولىمسؤول المحور: أ.م.د. المعماري اختصاص البحوث:

مصطفى طارق مصطفى / ر. قسم المدني / الكلية الهندسيةا.م.د. مقرر الجلسة: ة قسم المدني/ الجامعة التكنولوجي ا.م.د. حسن حمودي جوني/ ر.رئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت1.00 293 Behavior and Strength of Steel-Carbon-Plastic Hybrid Fiber Reinforced

Concrete Beams Esraa Khudhair Mohsin Abuzaid (Al-Mustansiriya University, College of Engineering)

1.10 295 Sustainable Local Architecture as a Base to Create the Future Heritage

in Contemporary Cities

Haitham Al-Shamari, Mr. Hasan Hadi & Mr. Adil

Al-Saidi Al-Nahrain University / College of Engineering

1.20 299 Time as a Critic Factor in Architecture Dr. Basim Hasan Hashim Al Majidi , Aseel Jafer (University of Technology)

1.30 321 The social dimension and its role in the applicability of smart cities in

Iraq" Dr.Nada Khaleefah Mohammed Ali Al-Rikabi

Assistant Professor, urban and regional planning center

for post graduate studies, University of Baghdad, Iraq

1.40 334 Reuse emergency housing in the reconstruction of host region

Russul B Alsaadi and Inaam A Albazzaz

Department of Architecture, Collage of Engineering,

University of Baghdad, Al-jadria street, Baghdad, Iraq

1.50 343 The Impacts of Building Contraventions and Informal Residential Land

Subdivision on the Quality of Life in Baghdad A.S. Hajer Al Ishaqee1 and A. Enam Albazaz2

1Governmental Contract Department, University of

Baghdad, Baghdad, Iraq

2Governmental Architecture Department, engineering

collage, University of Baghdad, Baghdad, Iraq

2.00 351 Iconic architecture and sustainability as a tool to attract the global

attention

Hawraa M S Aatty and Ghada M R Al Slik Department of Architecture, Collage of Engineering,

University of Baghdad, Baghdad, Iraq

2.10

368 Effect of Ethic Discourse in the Sustainability of Architecture Abdullah Saadoon Salman (University of

Technology, Department of Architectural Engineering)

Aseel Jafer Jasem (University of Technology,

Department of Architectural Engineering)

Nibras Mohammad Hadi (University of Technology,

Department of Architectural Engineering)

2.20 384 The Role of Environmental Indicators in Improving the Quality of

Urban Life in the City of Baghdad–A Comparative Study

J Q Zumaya (University of Baghdad , Urban and

Regional Planning Center for

Postgraduate Studies)

J B Motlak (University of Baghdad , Urban and

Regional Planning Center for

Postgraduate Studies)

محور الهندسة المدنية والمعماري

1.00-5.00للفترة الولى الجلسة ا /2019/3 6 التأريخ: ( 6:قاعة ) كهرباءال قسم بيداء حسين مولىمسؤول المحور: أ.م.د. بناء وانشاءات اختصاص البحوث:

معهدتكنولوجيا / بغداد /م.د.محمد معتوك محمد مقرر الجلسة: ا.د.ابراهيم جواد كاظم / ر. قسم هندسة العمارة في الجامعة التكنولوجية رئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت1.00 67 Effect of Metal Tanks Wastes as Fibers on Some Concrete Properties Rana Burhan Abdulrahman

Mohammed Nawaf Jirjees (University of Mosul)

1.10 136 Fire Flame Effect on the Compressive Strength of Reactive Powder

Concrete Using Different Methods of Cooling

Rawaa K Aboud1, Hadeel K Awad1 and Shatha D

Mohammed1 1 Department of Civil Engineering, University of Baghdad,

1.20 170 Practical Analysis Procedures of Steel Portal Frames Having Different

Connections Rigidities Using Modified Stiffness Matrix and End-Fixity

Factor Concept

Ali Msabawy1 , Fouad Mohammad2

1,2(Nottingham Trent University, Design and the Built

Environment, School of Architecture)

1.30 257 Numerical Analysis of Shear Strength Behavior of RC Two-way Bubble

Deck Slab with Shear Reinforcement I S Harba1 and M A Hammed2

1 Al-Nahrain University, College of Engineering,

2 Al-Nahrain University College of Engineering,

1.40 284 Performances of Steel-Concrete Composite Construction with

Demountable Shear Connectors – Review Abdulhadi Thamer Al Muslih (AL-Nahrain University)

Laith Al-hadithy (AL-Nahrain University)

1.50 288 Accuracy Assessment of Digital Elevation Model (DEM) Data Obtained

from ASTER Satellite in Flat Land

Mohammed H Azeez, Dr. Imzahim Abdulkareem Surveying Department. Southern Technical University/Technical

Institute in Al-shtraa.iraq

Civil Engineering Department. University of Technology.iraq

2.00 292 Analysis techniques for folded plate roofs and cellular bridges general

review and comparisons Laith K Al-hadithy1 and Baseem B Al-masoudy2

1Civil Engineering Department, Al-Nahrain University,

2Directorate General of Electrical Transmission Projects)

2.10 305 Behaviour of reinforced concrete deep beams in previous studies Khattab Saleem Abdul-Razzaq1, Ali Mustafa Jalil2,

Sarah Farhan Jebur3

1 Prof. Dr., University of Diyala, Civil Engineering, Diyala, Iraq 2 M.Sc. Student, University of Diyala, Civil Engineering, 3 Lecturer , University of Diyala, Civil Engineering,)

2.20 353 Behavior of Reinforced Reactive Powder Concrete Two – Way Slabs

With Openings

Ola Qasim ( Al- Mansour University )

2.30 362 Determine the factors that affecting on the applicability of Build Operate

Transfer contracts for infrastructure in Iraq Tareq A. Kaleel1 , and Muntadher Kareem21Assist. Prof

Dr. Department of Civil Engineering, Construction Engineering &

Projects Management Branch, University of Technology,

Baghdad, Iraq. 2Msc,

student, Department of Civil Engineering, Construction

Engineering & Projects Management Branch, University of

Technology, Baghdad, Iraq.

2.40 35 Effect of sustainable palm fiber on high strength concrete properties

Nada M. F. Aljalawi (University of Baghdad ,Civil

engineering Department)

محور الهندسة المدنية والمعماري

9.00-12.00للفترة لثانية الجلسة ا /2019/3 7 التأريخ: ( 6:قاعة ) كهرباءال قسم بيداء حسين مولىمسؤول المحور: أ.م.د. مواد اختصاص البحوث:

عالء الدين عبد الرحمن حسن كلية فنون تطبيقية .د.م.ا مقرر الجلسة: زاق طارش زبون/ ر. فرع الجيوماتيك/ قسم الهندسة المدنية/ الجامعة التكنولوجية رأ.د. عبد الرئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت9.00 108 Influence of Hybrid Fibers on the Fresh and Hardened Properties of

Structural Light Weight Self-Compacting Concrete Haider Araby Ibrahim1,and Basim Jabbar Abbas2

-Department of Civil Engineering, University of Al 1.2

Muthanna, Samawa, Iraq

9.10 112 Dynamic modulus of elasticity of geopolymer lightweight aggregate

concrete

Wasan I Khalil (University of Technology)

Waleed A Abbas ( University of Technology)

Ibtesam F Nasser (Middle Technical University/Institute

of Technology)

9.20 225 The Improving of the Solid Block Concrete Thermal Behavior

by Using the Powder Particles of Eucalyptus Camaldulensis

Bark

A A Hassan (Middle Technical University, Institute

technology – Baghdad)

M J Muhammed (Middle Technical University,

Institute technology – Baghdad)

9.30 228 Performance of Cement Mortar Composites Reinforced with Polyvinyl

Alcohol Fibers

Waleed A. Abbas (University of Technology)

Iqbal N. Korkesss (University of Technology)

Mahdi J. Hussein (University of Technology)

9.40 259 Eco-friendly Utilizing of Iron Filings in Production Reactive Powder

Concrete

Aymen J. Alsaad 1 , Mushtaq Sadiq Radhi 1 , and

Muntadher J. Taher 2,3 1 Department of Civil

Engineering, College of Engineering, University of

Kerbala, 56001,Karbala, Iraq .

9.50 261 Utilization of Pulverized Local Wastes for Production Sustainable

Reactive Powder Concrete

Mushtaq Sadiq Radhi 1, Zainab M. R. Abdul

Rasoul 1 and Laith Mohammed Ridha Mahmmod 1

1 Department of Civil Engineering, College of

Engineering, University of Kerbala

10.00 263 Evaluation of sustainable metakaolin-geopolymer concrete with crushed

waste clay brick

Mahmood Fawzi Ahmed Wasan Khalil, Qais Frieh (University of Technology)

10.10

273 Properties of Metakaolin Based Pervious Geopolymer Concrete Wasan I. Khalil (University of Technology)

Qais J. Frayyeh (University of Technology)

Haider T. Abed (University of Technology)

10.20 277 A Review of Previous Studies on the Reinforced Concrete Corbels Khattab S. Abdul-Razzaq (University of Diyala)

Abbas Haraj Mohammed (University of Diyala)

Asala Dawood (University of Diyala)

10.30 359 Relationship between Density and Strength for High-volume Fly Ash

Lightweight Porcelanite Concrete

Tareq S. al-Attar1 , Basil S. Alshathr1 , and

Mahmood E. Mohammed 2 1 Civil Eng. Dept.,University of Technology,Baghdad , Iraq

2 , PhD Candidate, Civil Engineering Department, University of

Technology, Iraq

10.40 377 Comparative study between the Cost of Normal Concrete and Reactive

Powder Concrete

Ola Adel Qasim (Al-Mansour University College)

محور الهندسة المدنية والمعماري

1.00-5.00للفترة ة لثالثالجلسة ا /2019/3 7 التأريخ: ( 6:قاعة ) كهرباءال قسم بيداء حسين مولىمسؤول المحور: أ.م.د. +مساحةد رموااختصاص البحوث:

ر. قسم المساحة/ الكلية التقنية الهندسية /علي حمد أجاسم .د.م.ا مقرر الجلسة: عبد هللا سعدون/ م. العميد للدراسات العليا/ قسم هندسة العمارة/ الجامعة التكنولوجية أ.د. رئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت1.00 22 Assessment of potable water quality in Balad city, Iraq Wesam Mahmood , Alhassan H Ismail

Muntasir A.H (Middle Technical University, Institute of Technology-Baghdad)

1.10 69 Sustainable Used of Natural Coagulants Aid for Enhancing the

Performance of Alum to Treat Turbid Water Ahmed Hassoon Ali , Younis Swadi Tlaiaa

Zainab Abdul Razak Nasir

(Mustansiriyah University / College of Engineering)

1.20 116 Short-Cut Nitrification of Iraqi Municipal Wastewater for Nitrogen

Removal in a Single Reactor

Khairi R. Kalash1, Mohammed A. Kadhom2,

Mustafa H. Al-Furaiji1

1Environment and Water Directorate, Ministry of Science and

Technology, Baghdad, Iraq 2Department of Prothesis and orthosis, Aldour Technical Institute,

Northern Technical University, Saladen, Iraq

1.30 180 Application of Variable Pulsed Irrigation Algorithm (VPIA) for Runoff

Losses Reduction: Case Study of Different Soil Types

Aymen A. Al Al-Baaj (University of Baghdad, Al-Khwarizmi

College of Engineering)

Andrew Lewis (Griffith University, School of Information

and Communication Technology)

Thair J. M. Alfatlawi (University of Babylon, College of

Engineering)

Prasad Kaparaju (Griffith University, School of

Engineering and Built Environment)

1.40 380 A Statistical Moddel to Simulate the Geometry of the Tunnel Gates Lips Mustafa Tariq Mustafa Al-Taie

Middle Technical University, Technical Engineering

College/Baghdad

1.50 396 Environmental Consideration in Flood Mitigation and River Restoration Thamer Ahmed Mohammad

Saad Sh. Sammen Qutaiba G. Majeed (Diyala University , College of Engineering)

2.00 89 The Impact of UAV Flight Planning Parameters on Topographic

Mapping Quality Control

Hassan H. Ali (University of Baghdad)

Dr. Fanar Mansour Abed (University of Baghdad)

2.10 153 Estimation High Resolution Air Temperature Based on landsat8 images

and Climate Datasets

and Z T Mohammed² 2Jasim, O Z ¹Anbari-R H AL

Chairman of committee of Engineering Collage 1

Dijlah University collage, Iraq

² Department of Civil Engineering, University of

Technology, Baghdad, IRAQ

2.20 162 Agro-Climatic Zones (ACZ) Using Climate Satellite Data in Iraq

Republic

Imzahim A. Alwan (Civil Engineering Department,

University of Technology, Baghdad-Iraq)

Hussein Karim (Civil Engineering Department,

University of Technology, Baghdad-Iraq)

Nadia A. Aziz (Ministry of Science and Technology/

Directorate of Space and Communication

2.30 166 Utilization of Reconnaissance Drought Index (RDI) for Monitoring of

Meteorological Drought over Middle Euphrates Region During Period

From 1988 to 2017

Imzahim A. Alwan (Civil Engineering Department,

University of Technology, Baghdad-Iraq)

prof.Dr.Abdul razzak Ziboon (Civil Engineering

Department, University of Technology, Baghdad-Iraq)

Alaa G Khalaf (ministry of science and

technology/space and communication directorate)

2.40 313 Sustainable Spatial Development of Oil Investment Locations in Iraq

)An Analytical Study of Environmental Impact( The site of the field

Ahdab in Wasit province as a case study

Turki Amer Tayeh Zaidi (University of Baghdad ,Urban

and Regional Planning Center for Postgraduate Studies)

Prof. Jamal Baqir Motlak (University of Baghdad, Urban

and Regional PlanningCenter for Postgraduate Studies)

محور الهندسة المدنية والمعماري

12.00 – 9.00للفترة الجلسة الثانية /2019/3 7التأريخ: 8قاعة /قسم الميكانيك

بيداء حسين مولىمسؤول المحور: أ.م.د. اختصاص : مواصالت + ادارة مشاريع

ا.م.د. باسم شبع كلية هندسة /جامعة بغداد قرر الجلسة:م ا.م.د. حسين درويش/ ر. قسم هندسة تخطيط مدن/ الكلية التقنية الهندسية/ السليمانية :رئيس الجلسة

اسم الباحث ومحل انتسابه اسم البحث ID الوقت9.00 77 Improvement of the Traffic Management of Deactivated Al-Faris Al-

Arabi Signalized Roundabout in Baghdad City

Mahmood Khalid Jumaah (Al-Farabi University

College)

9.10 121 The influence of Private Car Ownership on Patterns of Mode Choice in

Baghdad city

Noor Asmael (mustansiriyah university)

9.20 179 Dynamic Preemption Algorithm to Assign Priority for Emergency

Vehicle in Crossing Signalised Intersection

Amenah A Salih (Griffith university)

Andrew Lewis (Griffith University)

9.30 249 Investigate the Ability of Using Eggshell Powder as Filler in Hot Mix

Asphalt Mixture

Ghadah Ghassan Masood (Mustansiriyah University)

9.40 253 Evaluation of the Effect Mixing Conditions of Micro-Silica Modified

Asphalt Binder

Hussein Hamel Zghair (University of Technology)

9.50 312 Influence of Tire Crumb Rubber on Properties of Asphalt Binders G J Qasim, S A Tayh, and R A Yousif

Lecturer Dr. Highway and Transportation

Engineering Department, Faculty of Engineering,

Mustansiriyah University, Baghdad, Iraq

10.00 314 Influence of stakeholder management and communications management

in choosing of the best product achieve quality by Analytic Hierarchy

Process method

Alaa AL-Saedi1 and Jerzy Pasławski1

1Poznan University of technology/Faculty of Civil and

Environmental Engineering, Construction Technology

Management, Jana Pawła II, 61-139Poznan, Poland

10.10 346 Impact of the Feasibility Study on the Construction Projects Sawsan Rasheed Mohammed (University of Baghdad , Civil

Engineering Department)

Hafeth I. Naji (University of Diyala , Civil Engineering

Department)

Rouwaida Hussein Ali (University of Baghdad , Civil

Engineering Department)

10.20 381 The Impact of Financial Problems Related to Investment Projects in Iraq Huda Mohammad (Diyala University)

10.30 341 Effects of organic warm mix Asphalt Additives on Marshall Properties A J Addahhan (Al - Mustansiriya University College

of Engineering , Highway and Transportation

Department)

M Y Fattah (University of Technology , Civil

Engineering Department)

N M Asmael (Al-Mustansiriya University, College of

Engineering , Highways and Transportation

Department)

محور الهندسة المدنية والمعماري

9.00-12.00للفترة الثانية الجلسة /2019/3 7التأريخ: ( 5قسم ميكانيك القدرة :قاعة )

مسؤول المحور:أ.م.د. بيداء حسين مولى اختصاص البحوث: جيو قسم المدني/ الجامعة التكنولوجية /ا.م.د. عدي زكريا مقرر الجلسة: قسم المدني/جامعة النهرين /ا.م.د. اسماء ثامر ابراهيم رئيس الجلسة:

انتسابهاسم الباحث ومحل اسم البحث ID الوقت9.00 47 Developing the geometrical classification of non – cylindrical folds N N Haify (Middle Technical University /Institute of

Technology )

9.10 53 Experimental study for stabilizing clayey soil with eggshell powder and

plastic wastes

Mohammed N J Alzaidy

Assistant lecturer, Civil Engineering Dept., University of

Mosul, Iraq

9.20 216 The Performance of Shear Strength and Volume Changes of Expansive

Soils Utilizing Different Additives

Entisar Joudah Irshayyid (Al-Israa University

College)

Mohammed Fattah (University of Technology)

9.30 236 Heavy Metal Contamination in the Soils Collected From Al-

Muthanna Storage Site

Hisham M. Jawad Al Sharaa, Abdul Hameed M.

Jawad Al Obaid and Abdul Razzak T. Ziboon

Geomatics Eng. Div. Civil Eng. Dept. University of

Technology, Baghdad, Iraq

Environmental Research Center, University of

Technology, Baghdad, Iraq

9.40 272 Finite Element Analysis of Spread Footing Near Slops Basim Jabbar Abbas1, Hussein Yousif Aziz2,

Baydaa Hussain Maula3 and

Raid Tarik Alkateeb4

1,2 and 4, Muthanna University, College of

Engineering, Sammawa, Iraq

3 Middle Technical University, Institute of

Technology, Baghdad, Iraq

9.50 301 Geotechnical Properties of Clayey Soils Induced by the Presence of

Sodium Chloride

Kawther Yaly Hussain (University of Technology)

Falah H. Rahil (University of Technology)

Narjis Sabih Abbas (University of Technology)

محور الميكانيك والمواد

5.00-1.00لجلسة االولى للفترة ا /2019/3 6التأريخ: 8قاعة /قسم الميكانيك

مسؤول المحور: أ.م.د. علي حسن صالح اختصاص : ميكانيك مقرر الجلسة:م.د. أحمد عبدهللا ابراهيم رئيس الجلسة:أ.د. أحمد علي موسى

انتسابهاسم الباحث ومحل اسم البحث ID الوقت1.00 43 Effect of Nd -YAG laser treatment on corrosion behavior of AISI316L

stainless steel in artificial saliva solution Dr. Muna Khethier Abbass (University of

Technology) 1.10 44 Fuzzy logic model analysis of shear force in aluminium / poly

polyethylene lap joined by hot press

Mursal Luaibi Saad1 (Middle Technical University,

Kut Technical Institute)

Mohammed Helan Sar (Middle Technical University,

Engineering Technical College- Baghdad)

Osamah Sabah Barrak Middle Technical University,

Engineering Technical College- Baghdad) Sabah Khammass Hussein (Middle Technical University,

Engineering Technical College- Baghdad) Abbas Khammasse Hussein3 (University of

Technology)

1.20 70 Wear behavior and mechanism of CoCrMo alloy fabricated by

powder metallurgy route

Muna Khethier Abbass1

Jawdat Ali Yagoob2 1,2(University of Technology , Department of Production Engineering and Metalluragy

1.30 74 Studying the Physical and Mechanical Properties of Porcelanite :

lithium Metasilicate Composite as a Dental Veneer Material Raghad saad zinad (Al-Nahrain University, sciences collage)

Dr. Amel Salih Merzah (Al-EsraaUniversity,Building

and Construction Tech. Eng. Dep) Sarah

Kareem Mohammed (Al-Esraa University ,Building and

Construction Tech. Eng. Dep)

1.40 79 Theoretical considerations regarding upward velocity of

graphitelspherical particles in pure aluminum during melting Hazim F. Hassan1 Muna N. Ismael2

1,2(Middle Technical Universty, Institute of Technical/Anbar)

Gigel Neagu3

Florin Stefănescu4 Mihai Chisamera5

(University Politehnica of Bucharest)

1.50 90 Preparation pure ZnO, La-doped ZnO nanoparticles using sol-gel

technique: Characterization and Evaluation Antibacterial Activity Odai Salman Salman1 Duha Ahmed Ahmed2 1,2(University of

Technology, Applied Sciences department)

Ali Laiq Abed3 (University of Technology,

Nanotechnologies and Advanced Materials Research

Center)

2.00 101 Investigation of Deformation Mechanism and Failure Mode in Two

Point Incremental Sheet Forming

Harith Yarub Maan (University of Baghdad,College

of Administration and Economics)

2.10 115 Enhancement the Thermal Effects Produce by EDM Using Hybrid

Machining Dr. Saad k. Shather (University of Technology, Department of

Production Engineering

and Metalluragy) Dr. Shukry H. Aghdeab (University of Technology,

Department of Production Engineering

and Metalluragy) Waqass S. Khudhier (University of Technology, Department

of Production Engineering and

Metalluragy)

2.20 119 Effect of Shot Peening and Solidification on Fatigue Properties of Epoxy

Base Composite Material Hamza Salah Abdul-Kareem1

Dr. Fadhel Abbas Abdulla2 Dr. Mohammed

Abdulraoof Abdulrazzaq3 1,2,3 (Mechanical

Engineering Department, Al-Mustansiriayah

University, Baghdad, Iraq)

2.30 194 Hybrid Analytical Hierarchy Process and Continuous Improvement

Methodology to Enhance Sustainability: A Case Study on a Beverages

Industry

,2MahdyHussein F. 1Mohammed Jalil Ibrahim

4Dr. May George Kassir 3Roaya M. Jailawi

5Dawood Dr. Lamyaa Mohammed

-Institute of Al ,Department of Mechanical Power1

Suwaira, Middle Technical University, Baghdad, Iraq

Engineering, Materials Department of Metallurgical 2

Engineering College, University of Babylon, Hillah,

Iraq

Department of Chemical Engineering, Faculty of 3

University of Babylon, Hillah, Iraq ,Engineering

Department of Production Engineering and 5,4

Metallurgy, University of Technology, Baghdad, Iraq

2.40 204 Investigation of Sinter Braze Ferrous Powder Metallurgy to

Wrought Substrates by Ancorbraze 72 Filler Metal Alloy Doaa A. Falih ( Middle Technical University,

Engineering Technical College)

Fadhil A. Hashim2 (University of Technology)

Sabah Kh. Hussein3

(Middle Technical University, Engineering

Technical College)

2.50 221 Effect of Mechanical Surface Treatments on Impact Strength for Low

Carbon Steel AISI 1020 Dr. Ahmed Abdullah Ebraheem1

Layth Kailan Fairouz2

1,2(Middle Technical University , Institute of Technology-

Baghdad )

3.00 227 the by Dispersion Method on 2TiO-Study the Effect of Addition nano

Some Mechanical Properties and Durability of Cement Mortar

Mohammed J. Kadhim1, Rand Salih Al-Jadiri2 ,

Manolia Abed AL-Wahab Ali3

1,2,3Materials Engineering Department, Al-

Mustansiriayah University, Baghdad, Iraq

3.10 224 The Fresnel Coefficient of Thin Film Multilayer Using Transfer Matrix

Method TMM

Zahraa Hummam Mohammed

Electrical Engineering Department, Al-Mustansiriayah

University, Baghdad, Iraq

محور الهندسة المدنية والمعماري

12.00 – 9.00للفترة الجلسة الثانية /2019/3 7التأريخ: 8قاعة /قسم الميكانيك

بيداء حسين مولىمسؤول المحور: أ.م.د. اختصاص : مواصالت + ادارة مشاريع

ا.م.د. باسم شبع كلية هندسة /جامعة بغداد قرر الجلسة:م التقنية الهندسية/ السليمانيةا.م.د. حسين درويش/ ر. قسم هندسة تخطيط مدن/ الكلية :رئيس الجلسة

اسم الباحث ومحل انتسابه اسم البحث ID الوقت9.00 77 Improvement of the Traffic Management of Deactivated Al-Faris Al-

Arabi Signalized Roundabout in Baghdad City

Mahmood Khalid Jumaah (Al-Farabi University

College)

9.10 121 The influence of Private Car Ownership on Patterns of Mode Choice in

Baghdad city

Noor Asmael (mustansiriyah university)

9.20 179 Dynamic Preemption Algorithm to Assign Priority for Emergency

Vehicle in Crossing Signalised Intersection

Amenah A Salih (Griffith university)

Andrew Lewis (Griffith University)

9.30 249 Investigate the Ability of Using Eggshell Powder as Filler in Hot Mix

Asphalt Mixture

Ghadah Ghassan Masood (Mustansiriyah University)

9.40 253 Evaluation of the Effect Mixing Conditions of Micro-Silica Modified

Asphalt Binder

Hussein Hamel Zghair (University of Technology)

9.50 312 Influence of Tire Crumb Rubber on Properties of Asphalt Binders G J Qasim, S A Tayh, and R A Yousif

Lecturer Dr. Highway and Transportation

Engineering Department, Faculty of Engineering,

Mustansiriyah University, Baghdad, Iraq

10.00 346 Impact of the Feasibility Study on the Construction Projects Sawsan Rasheed Mohammed (University of Baghdad , Civil

Engineering Department)

Hafeth I. Naji (University of Diyala , Civil Engineering

Department)

Rouwaida Hussein Ali (University of Baghdad , Civil

Engineering Department)

10.10 381 The Impact of Financial Problems Related to Investment Projects in Iraq Huda Mohammad (Diyala University)

5.00-1.00للفترة الجلسة الثالثة /2019/3 7التأريخ: 8قاعة /قسم الميكانيك

مسؤول المحور: أ.م.د. علي حسن صالح اختصاص : ميكانيك مقرر الجلسة:أ.م.د. عبد الوهاب خضير حسن رئيس الجلسة:أ.د. أحمد قاسم محمد حسن

اسم الباحث ومحل انتسابه البحثاسم ID الوقت1.00 237 Experimental investigation of machining parameters on material

removal rate and surface roughness in chemical machining

Abbas Fadhil Ibrahim1

(University 1,2 2Ali Mundher Mustafa

ofTechnology)

1.10 242 Influence of Powder Mixed EDM on the Surface Hardness of Die steel Azzam Sabah Hameed1

Farouk O. Hamdoon2 (Wasit University , 1,2,3 3Mohaned S. Jafar

Collage of Engineering) 1.20 251 Mechanical Properties of Tin – Based Babbitt Alloy using the Direct

Extrusion Technique

Ahmed Ameed Zainulabdeen1

Fadhil Hashim Hashim Shams Hadi Assi2

(University of Technology)

1.30 254 An Investigation on Chemical Machining of NiTi SMA Prepared By

Powder Metallurgy Haydar Al-Ethari1 , Ali Hubi Haleem2

Noora Mohammed Gased3 1,2,3(University of Babylon,

College of Material's Engineering)

1.40 264 Development and Properties of Fiber Metal Laminate Used in

Aircraft Wing by Using Epoxy-Novolac Ahmed Mohammad Kadhum1 Saad Theeyab Faris)2

Ali Adwan Al-katawy3

1,2,3(College of Engineering–Daiyla University)

1.50 270 Numerical investigation of stress analysis of composite materials with

various elasticity

, 2Yaesin Bahrian , 1Karim Egab 4Yasir Khalil and 3Abdullah Okab

Minstry of higher education and scientific research, 1

10001,Baghdad, Iraq University of South Carolina Coulmbia, SC, 29208, USA 2

University of Thiqar, 64001, Thiqar, Iraq 3 4 University of Mazaya, 64001, Thiqar, Iraq

2.00 291 Characterization of Diffusion Bonding of Stainless Steel AISI 316 and

Pure Titanium sheets Using Copper Interlayer Ahmed Ali Akbar Akbar1 Bahaa Sami Mahdi2

Adnan Jumaa Aluwi3 1,2,3Production and Metallurgy Eng. Dept. – University of

Technology

2.10 326 The Behavior of Dry Sliding Wear for Aluminum Bronze Alloy

Nanoparticles 2and TiO 3O2Reinforced by Al Sami A. Ajeel , Rabiha S. Yaseen , Asaad KEqal

1,2,3(University of Technology)

2.20 327 Improvement the Corrosion Resistance of Aluminum Bronze Alloy (Cu-

Nanoparticles 2and TiO 3O27.7wt%Al) Reinforced by Al Sami A. Ajeel1

Rabiha S. Yaseen2

Asaad KEqal3

1,2,3 (University of Technology)

2.30 354 Numerical and experimental investigation of parameters affect the

forming load during rubber pad sheet metal forming

, 2Dr. Adnan I. Aljarjary , 1Dr. Karem M. Younis3Jalil J. Shukur

,yProduction Engineering and MetallurgDepartment of 1,2,3 University of Technology, Baghdad, Iraq

2.40 373 Fabrication of Porous NiTi Shape Memory Alloy Objects by Powder

Metallurgy for Biomedical Applications.

Dr. Nawal Mohammed Dawood1,

Dr.Abdul-Raheem Kadhum Abid Ali2 ,

Dr. Alaa Abdulhasan Atiyah3 1, 2 University of Babylon. 3University of Technology

2.50 274 Numerical study of drilling fluids pressure drop in wellbores with pipe

rotation Sara J Flayh1 , Assist. Prof. Dr Hussein S

Sultan2 and Prof. Dr. Ahmed K Alshara3

Address: 1,2Petroleum Engineering Department,

University of Bassra,Iraq 3Civil Engineering Department, University of Misan, Iraq

3.00 307 Effect of die geometry on thermal fatigue of tool steel in aluminium

alloy die-casting

R M Ghusoon*, H M Rawaa and H A Basim

Institute of Technology-Baghdad

Middle technical university

3.10 350 Copper Thin Film Deposited By PVD on Aluminum AA4015 Substrate

for Thermal Solar Application Mohammed J. Kadhim*, Khalid A. Sukkar**,

Ahmed S. Abbas*

*Production and Metallurgy Engineering Department /

University of Technology-Baghdad-Iraq.

** Chemical Engineering / University of Technology/

Baghdad-Iraq

3.20 356 Surface treatments of forged steel AISI6F3 by using high power CO2

laser

Amin D. Thamer¹, Mohammid Jasim Kadhim¹,

Ibrahim Abdu al kareem Ahmed¹.

¹University of Technology, Department of Production

Engineering and Metallurgy

3.30 369 Influence Of Shot Peening On Bending Forces For MIG Dissimilar 1Khairia Salman Hassan 2 Khalil esmail hanash,3 Ahmed

Welding Joint Aluminum Alloys

Ibrahim Razooqi 1,2Middle Technical University (MTU)/ Institute of

Technology –Baghdad –Department of Mechanic

Technician. 3Middle Technical University(MTU)/ Engineering

Technical College/Baghdad

3.40 376 Synthesis and Characterization of Nanocoatings Thin films by Atomic

Layer Deposition for Medical Applications Haitham M. Wadullah1 ( Northern Technical

University, Engineering Technical College) Sami

Abualnoun Ajeel2 Muna Khethier Abbass3

2,3(University of Technology , Department of Production

Engineering and Metallurgy).

3.50 383 Study the Effect of Casting Method on the Mechanical Properties of

ZA-27 Alloy Formed by Equal Channel Angular Extrusion

Reham Raad Ahmed1 Ali Hassan 2 (Middle

Technical University, Institute of Technology-Baghdad)

Khudhayer J. Jadee3 1,3(Technical Engineering College - Baghdad)

4.00 389 Formability of Laser Welding Plates of Dissimilar Materials

Zahraa Thamer Abd alwahed*

Dr. Khudhayer J. Jadee*

Prof. Dr. Hani Aziz Ameen*

*Middle Technical University-Technical Engineering

College/Baghdad

محور الهندسة الكيمياوية وهندسة النفط

5.00- 1.00الجلسة االولى للفترة 6 / 3/ 2019التأريخ: ( 1الكيمياوية قاعة ) الصناعاتقسم

مسؤول المحور: أ.م.د. علي موسى رضا اختصاص البحوث : كيمياوي بغداد/معهد تكنولوجيا /أ.م.د. عالء ضاري جواد مقرر الجلسة: جامعة بغداد /م عميد للشؤون العلمية والدراسات العليا/أ.د. ودود طاهر محمد رئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت

1.00 72

Simulation Physical And Chemical Blowing Agents for

Polyurethane Foam Production

Harith H. Al-Moameri*1, Ghanim Hassan2 and Baydaa Jaber1 1 Materials Engineering Department, Mustansiriayah University,

Baghdad, Iraq. 2 Middle Technical University, Baghdad, Iraq.

1.10 83

Preparation and Characterization of mordenite Zeolite from Iraqi

Sand H M Hussain1 , A A K Mohammed2

1Department of Chemical Engineering/ College of

Engineering/ University of Baghdad/ Baghdad-Iraq 2Al-Farabi University College/ Baghdad-Iraq

1.20

102

A comparative Study of Additives (Fe3+, Al3+, Ca2+) on

Polyacrylamide to Treatment of Waste Water in Refineries

Ali A. Hassan1, Haider T. Naeem1a, Raid T. Hadi1 1Chemical Engineering Department, College of Engineering,

Al-Muthanna University-Iraq

1.30

158 Influence of Nano Fluid on Interfacial Tension oil/water and

Wettability Alteration of limestone

Rana R Jalil1*, a and Hussein1Q Hussein1, b 1Chemical Engineering Department, College of engineering, University of Baghdad Baghdad, Iraq

1.40

174

Determination of the specifications and quantities of pollutants

present in water discharged from oil plant and their treatment

methods

HUSSAM NADUM ABDALRAHEEM AL ANI1,

ABDUL KARIM ABDUL LATIF ALI2, JAMAL ALI

BASHI3 1Institute of Technology- Baghdad, Middle Technical

University

1.50 281 Synthesis and Characterization of Metal Organic Frameworks for

Gas Storage Huda Merza Kareem, Rana Alrubaye

(University of Baghdad)

محور الهندسة الكيمياوية وهندسة النفط

12.00- 9.00للفترة ثانية الجلسة ال 7 / 3/ 2019التأريخ: ( 1الكيمياوية قاعة ) الصناعاتقسم

مسؤول المحور: أ.م.د. علي موسى رضا اختصاص البحوث : كيمياوي

بغداد/معهد تكنولوجيا/م.د. عاصم حسن محمدمقرر الجلسة: بغدادجامقة /كلية هندسة الخوارزمي/أ.د.عمار صالح عباسرئيس الجلسة: اسم الباحث ومحل انتسابه اسم البحث ID الوقت 9.00

175

Effect of nanoparticles on thermal conductivity of

epoxy resin system

Noor S. Majeed1, Shaymaa M. Salih 2 and

Basma A. Abdulmajeed3 1 Chemical Industries Department, Institute of

Technology /Baghdad, Middle Technical University,

Iraq. 2 Materiel Engineering Department, University of

Technology, Iraq. 3 Chemical Engineering Department, University of

Baghdad, Iraq.

9.10

186 Optimization of Continuous Electro-Fenton and Photo

electro-Fenton Processes to Treat Iraqi Oilfield Produced

Water Using Surface Response Methodology

Rand Alkafaji (University of Baghdad)

Abdulhaleem Mohammed ( Al-Farabi University

College)

9.20

198 NEURAL NETWORK PREDICTION OF SULFUR

CONTENT OF DIESEL FUEL FROM ITS PHYSICAL

PROPERTIES

Younis Muhsin Younis/ Middle Technical University –

Technical college Baghdad Material Engineering

Department-Iraq

Hakan Kayi Ankara University, Chemical Engineering

Department,06100 Ankara, Turkey

9.30

217

Removal of Food Carmoisine Dye E-112 From Waste Water

Using Different Manufactured Media

Rawaa Alhamdany Al-Israa University College

Amel S.Marzah Al-Israa University College

Eitizaz Awad Dijlah University College

9.40 232

The effect of sodium chloride on thermodynamic paraemeters

(ΔHo, ΔGo, ΔSo) and activation energy (ΔEs) of ion

association for cysteine and methionine with L-ascorbic acid

in aqueous solution at different temperature as comparative

study

M J Kadhim

Department of Power Mechanical Techniques, Institute of

Technology – Baghdad, Middle Technical University.

9.50 248

Removal of mixture of phenolic compounds from aqueous

solution by tire char adsorption

Abeer M.Abdul Ameer

Chemical Engineering Department –College of

Engineering-Baghdad University

محور الهندسة الكيمياوية وهندسة النفط

5.00- 1.00للفترة ثالثةالجلسة ال 7 / 3/ 2019التأريخ: ( 1الكيمياوية قاعة ) الصناعاتقسم

مسؤول المحور: أ.م.د. علي موسى رضا اختصاص البحوث : كيمياوي الجامعة التقنية الوسطى/م.د. رامي محمد جبرمقرر الجلسة: جامعة بغداد/قسم الهندسة الكيمياوية /أ.د. أحمد فائق حسنرئيس الجلسة:

اسم الباحث ومحل انتسابه اسم البحث ID الوقت

1.00

256

Synthesis of Graphene Oxide Using Simplified

Hummer's Method for Antibacterial Application M.R. Mohammad, Adi M. Abdul Hussien, Russel R. Ghanim

Department of Applied Science, University of Technology

Baghdad-Iraq

1.10

329

Modification and characterization of polyvinyl chloride by

graft copolymerization with acrylamide

Maha J M Al-Bahate1, Kadhum M Shabeeb1 and Bassam I

Khalil1

1Department of Materials Engineering, University of

Technology, Baghdad, Iraq

1.20

335

COD removal from disperse blue dye 79 in wastewater

by using Ozone-Fenton process A E Mohammed 1,*, H H Hamed 1, W M Sh Alabdraba 2 ,

and O M Ali1 1Technical Institute/ Hawija, Northern Technical University,

Iraq 2 Environmental Engineering Department, Tikrit University,

Iraq

1.30

382

Evaluation of a number of coagulants and coagulation

aids in removing water turbidity

1Farhan Rheem -bdul Ahlam A

Asst. Prof.

Institute of Technology / Middle Technical University, 1

Baghdad.

1.40

352

LD 0 (Lethal Does 0) of Clorine in Drinking Water

Systems

Ganim Hassan (Middle Technical University)

Harth Hasson Al-Moamen (Mustansiryah University)

Robert Edyrean (The University of Sheffield)

1.50

392

Chlorine Concentration-Time (CT) Values for

Echhornia Crassipes in Water

Ganim Hassan (Middle Technical University)

Harth Hasson Al-Moamen (Mustansiryah University

AL-Hassan H Ismail (Middle Technical University-Istitute

of Technology/Baghdad/ Water Resources Techniques

Departmen