新建 Microsoft Office Excel 工作表 (2)IEC 60044-1-1996 仪表用变压器. 第 1 部分: 电流变压器 Instrument transformers - Part 1: Current transformers 79P;A4 IEC 60044-2

IEC标准目录

标准号中文标题英文标题

开本页数

IEC 49/569/CDV-2002 频率控制和选择用压电器件和介质装置.词汇.第1部分:压电

和介质谐振器

Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 1:Piezoelectric and dielectric resonators

IEC 60027-1 AMD 1-1997 电气技术用字母符号.第1部分:通则.修改件1Letter symbols to be used in electrical technology - Part 1: General; Amendment 17P;A4

IEC 60027-1-1992 电工技术用字母符号.第1部分:总则Letter symbols to be used in electrical technology; part 1: general111P;A4

IEC 60027-2-2000 电气技术用字母符号.第2部分:电信和电子学Letter symbols to be used in electrical technology - Part 2 : Telecommunications and electronics66P;A4

IEC 60027-3-2002 电气技术用字母符号.第3部分:对数和有关量及其单位Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities,and their units25P;A4

IEC 60027-4-1985 电工技术用字母符号.第4部分:旋转电机用量值符号Letter symbols to be used in electrical technology. Part 4 : Symbols of quantities to be used forrotating electrical machines21P;A4

IEC 60028-1925 铜电阻国际标准International standard of resistance for copper9P;A4

IEC 60034-1 AMD 1-1997 旋转电机.第1部分:额定值及性能.修改件1Rotating electrical machines - Part 1: Rating and performance; Amendment 121P;A4

IEC 60034-1 AMD 2-1999 旋转电机.第1部分:额定值和性能.修改件2Rotating electrical machines - Part 1: Rating and performance; Amendment 241P;A4

IEC 60034-1 Edition 10.2-1999 旋转电机.第1部分:额定值和性能Rotating electrical machines - Part 1: Rating and performance135P;A4

IEC 60034-10-1975 旋转电机.第10部分:同步电机的惯用表达方式Rotating electrical machines; part 10: conventions for description of synchronous machines20P;A4

IEC 60034-11-1978旋转电机.第11部分:内装式热保护.第1章:旋转电机的保护

规则

Rotating electrical machines; part 11: built-in thermal protection; chapter 1: rules for protection ofrotating electrical machines31P;A4

IEC 60034-12-2002 旋转电机.第12部分:单速三相笼型感应电动机的起动性能Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cageinduction motors21P;A4

IEC 60034-14-1996旋转电机.第14部分:轴中心高56mm及以上的电机可靠机械

振动强度的测量、评价和极限值

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaftheights 56 mm and higher - Measurement, evaluation and limits of vibration25P;A4

IEC 60034-15-1995旋转电机.第15部分:耐用线圈架绕线定子线圈交流旋转电

机电平的脉冲电压

Rotating electrical machines - Part 15: Impulse voltage withstand levels of rotating a.c. machineswith form-wound stator coils17P;A4

IEC 60034-16-1-1991 旋转电机.第16部分:同步电机励磁系统.第1章:定义Rotating eletrical machines; part 16: excitation systems for synchronous machines; chapter 1:definitions19P;A4

（1） 351

IEC标准目录


开本页数

IEC 60034-16-2-1991旋转电机.第16部分:同步电机励磁系统.第2章:电力系统研

究模型

Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 2:models for power system studies67P;A4

IEC 60034-18-1 AMD 1-1996旋转电机.第18部分:旋转电机绝缘体系的功能评定.第1节:通则.修改件1

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 1:General guidelines; Amendment 117P;A4

IEC 60034-18-1-1992 旋转电机.第18部分:旋转电机绝缘体系的功能评定.第1节:通则

Functional evaluation of insulation systems for rotating electrical machines; part 1: generalguidelines

IEC 60034-18-21 AMD 1-1994旋转电机.第18部分:绝缘体系的功能评定.第21节:绕组线的

试验程序.热测定和分类.第1次修改

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21:Test procedures for wire-wound windings; Thermal evaluation and classification; Amendment 13P;A4

IEC 60034-18-21 AMD 2-1996旋转电机.第18部分:绝缘体系的功能评定.第21节:绕组线的

试验程序.热测定和分类.修改件2

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21:Test procedures for wire-wound windings - Thermal evaluation and classification; Amendment 213P;A4

IEC 60034-18-21-1992旋转电机.第18部分:绝缘体系的功能评定.第21节:绕组线的

试验程序.热测定和分类

Rotating electrical machines; part 18: functional evaluation of insulation systems; section 21: testprocedures for wire-wound windings; thermal evaluation and classification74P;A4

IEC 60034-18-22-2000旋转电机.第18-22部分:绝缘系统的功能性评定.散线绕组的

试验程序.绝缘元件替代品及改变物的分类

Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Testprocedures for wire-wound-windings; Classification of changes and insulation componentsubstitutions14P;A4

IEC 60034-18-31 AMD 1-1996旋转电机.第18部分:绝缘体系的功能评定.第31节:模绕绕组

线的试验程序.机器大功率为50MVA,电压为15kV的绝缘

系统的热测定和分类.修改件1

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 31:Test procedures for form-wound windings - Thermal evaluation and classification of insulationsystems used in machines up to and including 50 MVA and 15 kV; Amendment 15P;A4

IEC 60034-18-31-1992旋转电机.第18部分:绝缘体系的功能评定.第31节:模绕绕组

线的试验程序.机器大功率为50MVA,电压为15kV的绝缘

系统的热测定和分类

Rotating electrical machines; part 18: functional evaluation of insulation systems; section 31: testprocedures for form-wound windings; thermal evaluation and classification of insulation systemsused in machines up to and including 50 MVA and 15 kV27P;A4

IEC 60034-19-1995旋转电机.第19部分:通用直流电机和整流器馈电装置的特

殊试验法

Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventionaland rectifier-fed supplies37P;A4

IEC 60034-2 AMD 1-1995旋转电机.第2部分:旋转电机试验效率和损耗的测定方法.第一次修改

Rotating electrical machines - Part 2: Methods of determining losses and efficiency of rotatingelectrical machinery from tests (excluding machines for traction vehicles); Amendment 135P;A4

IEC 60034-2 AMD 2-1996旋转电机.第2部分:旋转电机损耗和效率的试验测定方法(不包括牵引车辆用电机).修改件2

Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotatingelectrical machinery from tests (excluding machines for traction vehicles); Amendment 221P;A4

（2） 351

IEC标准目录


开本页数

IEC 60034-2-1972旋转电机.第2部分:旋转电机损耗和效率的试验测定方法(不包括牵引车辆用电机)

Rotating electrical machines; part 2: methods for determining losses and efficiency of rotatingelectrical machinery from tests (excluding machines for traction vehicules)55P;A4

IEC 60034-22-1996旋转电机.第22部分:往复式内燃机驱动的发电机组用交流

发电机

Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC)engine driven generating sets35P;A4

IEC 60034-2A-1974 第2次补充

Rotating electrical machines; part 2: methods for determining losses and efficiency of rotatingelectrical machinery from tests (excluding machines for traction vehicules); first supplement:measurement of losses by the calorimetric method36P;A4

IEC 60034-3-1988 旋转电机.第3部分:50Hz三相汽轮发电机的额定值和特性Rotating electrical machines; part 3: ratings and characteristics of three-phase, 50 Hz turbine-type machines

IEC 60034-4 AMD 1-1995 旋转电机.第1部分:额定值和性能.第一次修改Rotating electrical machines - Part 4: Methods of determining synchronous machine quantitiesfrom tests; Amendment 13P;A4

IEC 60034-4-1985 旋转电机.第4部分:同步电机参数的试验测定方法Rotating electrical machines; part 4 : methods for determining synchronous machine quantitiesfrom tests175P;A4

IEC 60034-5-2000旋转电机.第5部分:旋转电机总体设计的防护等级(IP代码).分级

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design ofrotating electrical machines (IP code); Classification39P;A4

IEC 60034-6-1991 旋转电机.第6部分:冷却方法Rotating electrical machines; part 6: methods of cooling (IC code)39P;A4

IEC 60034-7 AMD 1-2000旋转电机.第7部分:建筑、安装部件和终端接线盒位置的型

式分类.修改件1Rotating electrical machines - Part 7: Classification of types of construction, mountingarrangements and terminal box position (IM Code); Amendment 1

IEC 60034-7 Edition 2.1-2001旋转电机.第7部分:结构类型分类、安装方法和终端接线盒

位置

Rotating electrical machines - Part 7: Classification of types of constructions, mountingarrangements and terminal box position (IM code)49P;A4

IEC 60034-7-1992 旋转电机.第7部分:旋转电机的结构和安装配置型式的分类Rotating electrical machines; part 7: classification of types of constructions and mountingarrangements (IM code)45P;A4

IEC 60034-8-2002 旋转电机.第8部分:旋转电机的线端标志和旋转方向Rotating electrical machines - Part 8: Terminal markings and direction of rotation61P;A4

IEC 60034-9-1997 旋转电机.第9部分:噪声极限值Rotating electrical machines - Part 9: Noise limits19P;A4

IEC 60038 AMD 1-1994 IEC标准电压.修改件1IEC standard voltages; Amendment 19P;A4

IEC 60038 AMD 2-1997 IEC标准电压.第2次修订IEC standard voltages; Amendment 23P;A4

（3） 351

IEC标准目录


开本页数

IEC 60038 Edition 6.2-2002 IEC 标准电压IEC standard voltages21P;A4

IEC 60038-1983 IEC标准电压IEC standard voltages19P;A4

IEC 60041-1991测定水轮机、蓄水泵和水泵-滑轮机水力性能的现场验收试

验

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storagepumps and pump-turbines419P;A4

IEC 60044-1 AMD 1-2000 仪表用变压器.第1部分:电流互感器.修改件1Instrument transformers - Part 1: Current transformers; Amendment 121P;A4

IEC 60044-1 AMD 2-2002 仪表用互感器.第1部分:电流互感器.修改件2Instrument transformers - Part 1: Current transformers; Amendment 217P;A4

IEC 60044-1 Edition 1.2-2003 仪表用变压器.第1部分:电流互感器Instrument transformers - Part 1: Current transformers120P;A4

IEC 60044-1-1996 仪表用变压器.第1部分:电流变压器Instrument transformers - Part 1: Current transformers79P;A4

IEC 60044-2 AMD 1-2000 仪表用变压器.第2部分:感应电压变压器.修改件1Instrument transformers - Part 2: Inductive voltage transformers; Amendment 19P;A4

IEC 60044-2 AMD 2-2002 仪表用互感器.第2部分:电感式电压互感器.修改件3Instrument transformers - Part 2: Inductive voltage transformers; Amendment 213P;A4

IEC 60044-2 Edition 1.2-2003 仪表用变压器.第2部分:感应电压变压器Instrument transformers - Part 2: Inductive voltage transformers106P;A4

IEC 60044-3-2002 仪表用互感器.第3部分:组合式互感器Instrument transformers - Part 3: Combined transformers41P;A4

IEC 60044-6-1992 仪表用互感器.第6部分:瞬时特殊保护用电流互感器的要求Instrument transformers; part 6: requirements for protective current transformers for transientperformance87P;A4

IEC 60044-7-1999 仪表用互感器.第7部分:电子电压互感器Instrument transformers - Part 7: Electronic voltage transformers137P;A4

IEC 60044-8-2002 互感器.第8部分:电子电流互感器Instrument transformers - Part 8: Electronic current transformers124P;A4

IEC 60045-1-1991 汽轮机.第1部分:规范Steam turbines; part 1: specifications87P;A4

IEC 60050-0-1979 国际电工词汇.第0章:国际电工词汇总索引International Electrotechnical Vocabulary General Index1011P;A4

IEC 60050-101-1998 国际电工词汇.第101部分:数学International Electrotechnical Vocabulary - Part 101: Mathematics100P;A4

IEC 60050-111-1996 国际电工词汇.第111章:物理和化学International Electrotechnical Vocabulary - Chapter 111: Physics and chemistry95P;A4

IEC 60050-121 AMD 1-2002 国际电工词汇.第121部分:电磁学.修改件1International Electrotechnical Vocabulary - Part 121: Electromagnetism; Amendment 112P;A4

（4） 351

IEC标准目录


开本页数

IEC 60050-121-1998 国际电工词汇.第121部分:电磁学International Electrotechnical Vocabulary - Part 121: Electromagnetism169P;A4

IEC 60050-131-2002 国际电工词汇.第131部分:电路理论International Electrotechnical Vocabulary - Part 131: Circuit theory212P;A4

IEC 60050-151-2001 国际电工词汇.第151部分:电磁装置International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices150P;A4

IEC 60050-161 AMD 1-1997 国际电工词汇.第161章:电磁兼容性.第1次修订International Elektrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility;Amendment 1

IEC 60050-161 AMD 2-1998 国际电工词汇.第161章:电磁兼容性.修改件2 International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility;

IEC 60050-161-1990 国际电工词汇.第161章:电磁兼容性International elektrotechnical vocabulary; chapter 161: electromagnetic compatibility66P;A4

IEC 60050-191 AMD 1-1999 国际电工词汇.第191章:可靠性和服务质量.修改件1International Electrotechnical Vocabulary - Chapter 191: Dependability and quality of service;Amendment 168P;A4

IEC 60050-191 AMD 2-2002 国际电工词汇.第191部分:可靠性和服务质量.修改件2International Electrotechnical Vocabulary - Part 191: Dependability and quality of service;Amendment 2

IEC 60050-191-1990 国际电工词汇.第191章:可靠性和服务质量International electrotechnical vocabulary; chapter 191: dependability and quality of service135P;A4

IEC 60050-195 AMD 1-2001 国际电工词汇.第195部分:防止电冲击和接地.修改件1International Electrotechnical Vocabulary - Part 195: Earthing and protection against electricshock; Amendment 111P;A4

IEC 60050-195-1998 国际电工词汇.第195章:接地和防止电击International Electrotechnical Vocabulary - Part 195: Earthing and protection against electricshock

IEC 60050-212-1990 国际电工词汇.第212章:绝缘固体,液体和气体International electrotechnical vocabulary; chapter 212: insulating solids, liquids and gases95P;A4

IEC 60050-221 AMD 1-1993 第1次修改International electrotechnical vocabulary; chapter 221: magnetic materials and components;amendment 15P;A4

IEC 60050-221 AMD 2-1999 国际电工词汇.第221章:磁性材料和元件.补充件2International Electrotechnical Vocabulary - Chapter 221: Magnetic materials and components;Amendment 215P;A4

IEC 60050-221-1990 国际电工词汇.第221章:磁性材料和元部件International electrotechnical vocabulary; chapter 221: magnetic materials and components87P;A4

IEC 60050-300-2001

国际电工词汇.电气和电子测量和测量仪器.第311部分:与测

量有关的通用术语.第312部分:与电气测量有关的一般术语.第313部分:电气测量仪器的类型.第314部分:根据仪器类型

用的特殊术语

International Electrotechnical Vocabulary - Electrical and electronic measurements andmeasuring instruments - Part 311: General terms relating to measurements; Part 312: Generalterms relating to electrical measurements; Part 313: Types of electrical measuring instruments;Part 314: Specific terms according to the type of instrument

IEC 60050-321-1986 国际电工词汇.第321章:仪器用互感器International Electrotechnical Vocabulary. Part 321 : Instrument transformers48P;A4

（5） 351

IEC标准目录


开本页数

IEC 60050-351-1998 国际电工词汇.第315章:自动控制International Electrotechnical Vocabulary - Part 351: Automatic control280P;A4

IEC 60050-371 AMD 1-1997 国际电工词汇.第371章:遥控.第1次修订International Electrotechnical Vocabulary - Chapter 371: Telecontrol; Amendment 115P;A4

IEC 60050-371-1984 国际电工词汇.第371章:遥控International Electrotechnical Vocabulary. Part 371 : Chapter 371: Telecontrol52P;A4

IEC 60050-393 AMD 1-2000 国际电工词汇.第393章:核仪器.物理现象和基本概念.修改

件1

International Electrotechnical Vocabulary - Chapter 393: Nuclear instrumentation: Physicalphenomena and basic concepts; Amendment 1

IEC 60050-393-1996 国际电工词汇.第393章:核仪器.物理现象和基本概念International Electrotechnical Vocabulary - Chapter 393: Nuclear instrumentation: Physicalphenomena and basic concepts156P;A4

IEC 60050-394 AMD 1-1996 国际电工词汇.第394章:核仪器:仪器.修改件1International Electrotechnical Vocabulary - Chapter 394: Nuclear instrumentation: Instruments;Amendment 13P;A4

IEC 60050-394 AMD 2-2000 国际电工词汇.第394章:核装置.仪器.修改件2International Electrotechnical Vocabulary - Chapter 394: Nuclear instrumentation; Instruments;Amendment 239P;A4

IEC 60050-394-1995 国际电工词汇.第394章:核装置.仪器International Electrotechnical Vocabulary - Chapter 394: Nuclear instrumentation: Instruments168P;A4

IEC 60050-411-1996 国际电工词汇.第411章:旋转电机International Electrotechnical Vocabulary - Chapter 411: Rotating machines190P;A4

IEC 60050-415-1999 国际电工词汇.第415部分:风力涡轮发电机系统International Electrotechnical Vocabulary - Part 415: Wind turbine generator systems68P;A4

IEC 60050-421-1990 国际电工词汇.第421章:电力变压器和电抗器International electrotechnical vocabulary; chapter 421: power transformers and reactors57P;A4

IEC 60050-426-1990 国际电工词汇.第426章:(爆炸性环境用)防爆电气设备International electrotechnical vocabulary; chapter 426: electrical apparatus for explosiveatmospheres

IEC 60050-431-1980 国际电工词汇.第431章:饱和电抗器International Electrotechnical Vocabulary. Part 431 : Transductors23P;A4

IEC 60050-436-1990 国际电工词汇.第436章:电力电容器International electrotechnical vocabulary; chapter 436: power capacitors25P;A4

IEC 60050-441 AMD 1-2000国际电工词汇.第441章:开关设备、控制设备和熔断器.修改

件1

International Electrotechnical Vocabulary - Chapter 441: Switchgear, controlgear and fuses;Amendment 113P;A4

IEC 60050-441-1984 国际电工词汇.第441章:开关设备、控制设备和熔断器International Electrotechnical Vocabulary. Part 441 : Chapter 441: Switchgear, controlgear andfuses

IEC 60050-442-1998 国际电工词汇.第442章:电气附件International Electrotechnical Vocabulary - Part 442: Electrical accessories156P;A4

IEC 60050-444-2002 国际电工词汇.第444部分:基本继电器International Electrotechnical Vocabulary - Part 444: Elementary relays88P;A4

（6） 351

IEC标准目录


开本页数

IEC 60050-445-2002 国际电工词汇.第445部分:特定时间的有或无继电器International Electrotechnical Vocabulary - Part 445: Specified time all-or-nothing relays52P;A4

IEC 60050-446-1983 国际电工词汇.第446部分:第446章:电气继电器International Electrotechnical Vocabulary. Part 446 : Chapter 446: Electrical relays62P;A4

IEC 60050-448-1995 国际电工词汇.第448章:电力系统保护International Electrotechnical Vocabulary - Chapter 448: Power system protection99P;A4

IEC 60050-461 AMD 1-1993 第1次修改International electrotechnical vocabulary; chapter 461: electric cables; amendment 157P;A4

IEC 60050-461 AMD 2-1999 国际电工词汇.第461章:电缆.补充件2International Electrotechnical Vocabulary - Chapter 461: Electric cables; Amendment 236P;A4

IEC 60050-461-1984 国际电工词汇.第461章:电缆International Electrotechnical Vocabulary. Part 461 : Chapter 461: Electric cables51P;A4

IEC 60050-466-1990 国际电工词汇.第466章:架空线路International electrotechnical vocabulary; chapter 466: overhead lines70P;A4

IEC 60050-471-1984 国际电工词汇.第471章:绝缘子International Electrotechnical Vocabulary. Part 471 : Chapter 471: Insulators30P;A4

IEC 60050-481-1996 国际电工词汇.第481章:原电池和蓄电池International Electrotechnical Vocabulary - Chapter 481: Primary cells and batteries45P;A4

IEC 60050-486-1991 国际电工词汇.第486章:蓄电池和蓄电池组International electrotechnical vocabulary; chapter 486: secondary cells and batteries45P;A4

IEC 60050-521-2002 国际电工词汇.第521部分:半导体器件和集成电路International Electrotechnical Vocabulary - Part 521: Semiconductor devices and integratedcircuits

IEC 60050-531-1974 国际电工词汇.第531章:电子管International Electrotechnical Vocabulary. Part 531 : Electronic tubes167P;A4

IEC 60050-541-1990 国际电工词汇.第541章:印制电路International electrotechnical vocabulary; chapter 541: printed circuits19P;A4

IEC 60050-551-1998 国际电工词汇.第551章:电力电子学International Electrotechnical Vocabulary - Part 551: Power electronics171P;A4

IEC 60050-551-20-2001 国际电工词汇.第551-20部分:电力电子学.谐波分析International Electrotechnical Vocabulary - Part 551-20: Power electronics; Harmonic analysis21P;A4

IEC 60050-55-1970 国际电工词汇.第55章:电报和电话International Electrotechnical Vocabulary. Part 55 : Telegraphy and telephony256P;A4

IEC 60050-561 AMD 1-1995国际电工词汇.第561章:频率控制与选择用压电器件.第1次修改

International Electrotechnical Vocabulary - Chapter 561: Piezoelectric devices for frequencycontrol and selection - Section 561-06: Surface acoustic wave filters; Amendment 124P;A4

IEC 60050-561 AMD 2-1997国际电工词汇.第561章:频率控制和选择用压电器件.第561-07节:表面声波设备的特性.修改件2

International Electrotechnical Vocabulary - Chapter 561: Piezoelectric devices for frequencycontrol and selection - Section 561-07: Characteristics of surface acoustic wave (saw) devices;Amendment 2

（7） 351

IEC标准目录


开本页数

IEC 60050-561-1991 国际电工词汇.第561章:频率控制与选择用压电器件International electrotechnical vocabulary; chapter 561: piezoelectric devices for frequency controland selection49P;A4

IEC 60050-581 AMD 1-1998 国际电工词汇.第581章:电子设备用机电元件.第1次修订International Electrotechnical Vocabulary - Chapter 581: Electromechanical components forelectronic equipment; Amendment 1

IEC 60050-581-1978 国际电工词汇.第581章:电子设备用机电元件International Electrotechnical Vocabulary. Part 581 : Electromechanical components forelectronic equipment93P;A4

IEC 60050-601 AMD 1-1998 国际电工词汇.第601章:发电、输电和配电--总则,修改件1International Electrotechnical Vocabulary - Chapter 601: Generation, transmission anddistribution of electricity - General; Amendment 116P;A4

IEC 60050-601-1985 国际电工词汇.第601章:发电、输电和配电-总则International Electrotechnical Vocabulary. Part 601 : Chapter 601 : Generation, transmission anddistribution of electricity - General40P;A4

IEC 60050-602-1983 国际电工词汇.第602章:发电、输电和配电-发电International Electrotechnical Vocabulary. Chapter 602: Generation, transmission and distributionof electricity - Generation53P;A4

IEC 60050-603 AMD 1-1998国际电工词汇.第603章:发电、输电和配电--电力系统规划

和管理.修改件1International Electrotechnical Vocabulary - Chapter 603: Generation, transmission anddistribution of electricity - Power system planning and management; Amendment 1

IEC 60050-603-1986国际电工词汇.第603章:发电、输电和配电-电力系统规划

和管理

International Electrotechnical Vocabulary. Part 603 : Chapter 603: Generation, transmission anddistribution of electricity. Power system planning and management56P;A4

IEC 60050-604 AMD 1-1998 国际电工词汇.第604章:发电,输电和配电-运行.补充件1International Electrotechnical Vocabulary - Chapter 604: Generation, transmission anddistribution of electricity - Operation; Amendment 120P;A4

IEC 60050-604-1987 国际电工词汇.第604章:发电,输电和配电-运行International Electrotechnical Vocabulary. Part 604 : Chapter 604: Generation, transmission anddistribution of electricity - Operation120P;A4

IEC 60050-605-1983 国际电工词汇.第605章:发电、输电和配电-变电站International Electrotechnical Vocabulary. Part 605 : Chapter 605: Generation, transmission anddistribution of electricity - Substation47P;A4

IEC 60050-651-1999 国际电工词汇.第651部分:带电作业International Electrotechnical Vocabulary - Part 651: Live working96P;A4

IEC 60050-691-1973 国际电工词汇.第691章:电费计算International Electrotechnical Vocabulary. Part 691 : Tariffs for electricity51P;A4

IEC 60050-701-1988 国际电工词汇.第701章:电信、频道和网络International electrotechnical vocabulary; chapter 701: telecommunications, channels andnetworks

IEC 60050-702-1992 国际电工词汇.第702章:振荡、信号及有关设备International electrotechnical vocabulary; chapter 702: oscillations, signals and related devices228P;A4

（8） 351

IEC标准目录


开本页数

IEC 60050-704-1993 国际电工词汇.第704章:传输International electrotechnical vocabulary; chapter 704: transmission203P;A4

IEC 60050-705-1995 国际电技术词汇.第705章:无线电波传播International Electrotechnical Vocabulary - Chapter 705: Radio wave propagation221P;A4

IEC 60050-712-1992 国际电工词汇.第712章:天线International electrotechnical vocabulary; chapter 712: antennas151P;A4

IEC 60050-713-1998国际电工词汇.第713部分:无线电传输:发射器,接收器,网络

和操作

International Electrotechnical Vocabulary - Part 713: Radiocommunications: Transmitters,receivers, networks and operation182P;A4

IEC 60050-714-1992 国际电工词汇.第714章:电信的开关设备和信号设备International electrotechnical vocabulary; chapter 714: switching and signalling intelecommunications

IEC 60050-715-1996 国际电工词汇.第715章:电信网络、电传和操作International Electrotechnical Vocabulary - Chapter 715: Telecommunications networks,teletraffic and operation74P;A4

IEC 60050-716-1-1995国际电工词汇.第716-1章:综合业务数字网(ISDN).第1部分:一般特性

International Electrotechnical Vocabulary - Chapter 716-1: Integrated Services Digital Network(ISDN) - Part 1: General aspects44P;A4

IEC 60050-721-1991 国际电工词汇.第721章:电报、传真和数据通信International electrotechnical vocabulary; chapter 721: telegraphy, facsimile and datacommunication

IEC 60050-722-1992 国际电工词汇.第722章:电话学International Electrotechnical Vocabulary: chapter 722: telephony129P;A4

IEC 60050-723 AMD 1-1999 国际电工词汇.第723部分:广播:声音,电视,数据.补充件1International Electrotechnical Vocabulary - Chapter 723: Broadcasting: Sound, television, data;Amendment 178P;A4

IEC 60050-723-1997 国际电工词汇.第723章:广播:声音,电视,数据International Electrotechnical Vocabulary - Chapter 723: Broadcasting: Sound, television, data292P;A4

IEC 60050-725-1994 国际电工词汇.第725部分:空间无线电通信International Electrotechnical Vocabulary - Chapter 725: Space radiocommunications111P;A4

IEC 60050-726-1982 国际电工词汇.第726章:传输、线路和波导International Electrotechnical Vocabulary. Part 726 : Chapter 726: Transmission, lines andwaveguides

IEC 60050-731-1991 国际电工词汇.第731章:光纤通信International electrotechnical vocabulary; chapter 731: optical fibre communication165P;A4

IEC 60050-801-1994 国际电工词汇.第801章:声学和电声学International Electrotechnical Vocabulary - Chapter 801: Acoustics and electroacoustics166P;A4

IEC 60050-806 AMD 1-2001 国际电工词汇.第806章:音频和视频的录制和放声.修改件1International Electrotechnical Vocabulary - Part 806: Recording and reproduction of audio andvideo; Amendment 122P;A4

IEC 60050-806-1996 国际电技术词汇.第806章:音频和视频的录制和再放声International Electrotechnical Vocabulary - Chapter 806: Recording and reproduction of audioand video165P;A4

（9） 351

IEC标准目录


开本页数

IEC 60050-807-1998 国际电工词汇.第807部分:声音信号和图像信号的数字记录International Electrotechnical Vocabulary - Part 807: Digital recording of audio and video signals53P;A4

IEC 60050-808-2002 国际电工词汇.第808部分:无播音的摄象机International Electrotechnical Vocabulary - Part 808: Video cameras for non-broadcasting55P;A4

IEC 60050-811-1991 国际电工词汇.第811章:电力牵引International electrotechnical vocabulary; chapter 811: electric traction231P;A4

IEC 60050-815-2000 国际电工词汇.第815部分:超导性International Electrotechnical Vocabulary - Part 815: Supraconductivity194P;A4

IEC 60050-826 AMD 1-1990 国际电工词汇.第826章:建筑物的电力装置.修改件1International electrotechnical vocabulary; chapter 826: electrical installations of buildings;amendment 1 to IEC 60050-826:198214P;A4

IEC 60050-826 AMD 2-1995 国际电工词汇.第826章:建筑物的电力装置.修改件2International Electrotechnical Vocabulary - Chapter 826: Electrical installations of buildings;Amendment 214P;A4

IEC 60050-826 AMD 3-1999 国际电工词汇.第826章:建筑物的电力装置.修改件3International Electrotechnical Vocabulary - Chapter 826: Electrical installations of buildings;Amendment 316P;A4

IEC 60050-826-1982 国际电工词汇.第826部分:第826章:建筑物的电力装置International Electrotechnical Vocabulary. Part 826 : Chapter 826: Electrical installations ofbuildings

IEC 60050-841-1983 国际电工词汇.第841章:工业电热International Electrotechnical Vocabulary. Part 841 : Chapter 841: Industrial electroheating164P;A4

IEC 60050-845-1987 国际电工词汇.第845章:照明International electrotechnical vocabulary; chapter 845: lighting365P;A4

IEC 60050-851-1991 国际电工词汇.第851章:电焊International electrotechnical vocabulary; chapter 851: electric welding30P;A4

IEC 60050-881-1983 国际电工词汇.第881章:辐射学和辐射物理学International Electrotechnical Vocabulary. Part 881 : Chapter 881: Radiology and radiologicalphysics

IEC 60050-891-1998 国际电工词汇.第891章:电生物学International Electrotechnical Vocabulary - Part 891: Electrobiology107P;A4

IEC 60051-1-1997直接动作指示模拟电气测量仪器及其附件. 第1部分:定义和

对所有部分共同的一般要求

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1:Definitions and general requirements common to all parts81P;A4

IEC 60051-2-1984直接动作指示模拟电气测量仪器及其附件.第2部分:电流表

和电压表的特殊要求

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2 :Special requirements for amperemeters and voltmeters21P;A4

IEC 60051-3 AMD 1-1994直接动作指示模拟电气测量仪器及其附件.第3部分:瓦特功

率表和无功表的特殊要求.修订件1

Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 3:Special requirements for wattmeters and varmeters; Amendment 13P;A4

（10） 351

IEC标准目录


开本页数

IEC 60051-3-1984直接动作指示模拟电气测量仪器及其附件.第3部分:瓦特功

率表和无功表的特殊要求

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3 :Special requirements for wattmeters and varmeters25P;A4

IEC 60051-4-1984直接动作指示模拟电气测量仪器及其附件.第4部分:频率表

的特殊要求

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4 :Special requirements for frequency meters17P;A4

IEC 60051-5-1985 直接动作指示模拟电气测量仪器及其附件.第5部分:相位表

、功率因数表和同步指示器的特殊要求

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5:Special requirements for phase meters, power factor meters and synchroscopes.

IEC 60051-6-1984直接动作指示模拟电气测量仪器及其附件.第6部分:欧姆表

(阻抗表)和电导表的特殊要求

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6 :Special requirements for ohmmeters (impendance meters) and conductance meters17P;A4

IEC 60051-7-1984直接动作指示模拟电气测量仪器及其附件.第7部分:多功能

仪表的特殊要求

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7 :Special requirements for multi-function instruments13P;A4

IEC 60051-8-1984直接动作指示模拟电气测量仪器及其附件.第8部分:附件的

特殊要求

Direct acting indicating analogue electrical measuring instruments and their accessories. Part 8 :Special requirements for accessories17P;A4

IEC 60051-9 AMD 1-1994直接动作指示模拟电测量仪器及其附件.第9部分:推荐试验

法.修改件1

Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9:Recommended test methods; Amendment 13P;A4

IEC 60051-9 AMD 2-1995直接动作指示模拟电测量仪器及其附件.第9部分:推荐试验

法.修改件2

Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9:Recommended test methods; Amendment 23P;A4

IEC 60051-9-1988直接动作指示模拟电气测量仪器及其附件.第9部分:推荐试

验法

Direct acting indicating analogue electrical measuring instruments and their accessories; part 9:recommended test methods131P;A4

IEC 60052-2002 用标准(空)气隙法测量电压Voltage measurement by means of standard air gaps55P;A4

IEC 60055-1-1997额定电压小于18/30KV的纸绝缘金属护套电缆(用铜芯或铝

芯导线,不包括压气和充油电缆).第1部分:电缆及其附件试

验

Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper oraluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cablesand their accessories53P;A4

IEC 60055-2 AMD 1-1989额定电压小于18/30KV的纸绝缘金属护套电缆(用铜芯或铝

芯导线,不包括压气和充油电缆).第2部分:一般要求和结构

要求.第1次修订

Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper oraluminium conductors and excluding gas-pressure and oil-filled cables); part 2: general andconstruction requirements; amendment No. 1 to IEC 60055-2:19815P;A4

IEC 60055-2-1981额定电压小于18/30KV的纸绝缘金属护套电缆(用铜芯或铝

芯导线,不包括压气和充油电缆).第2部分:一般要求和结构

要求

Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper oraluminium conductors and excluding gas-pressure and oil-filled cables); Part 2: General andconstruction requirements75P;A4

（11） 351

IEC标准目录


开本页数

IEC 60059-1999 IEC标准电流额定值IEC standard current ratings5P;A4

IEC 60060-1-1989 高压试验技术.第1部分:一般定义和试验要求High-voltage test techniques; part 1: general definitions and test requirements131P;A4

IEC 60060-2 AMD 1-1996 高压试验技术.第2部分:测量系统.补充件1High-voltage test techniques - Part 2: Measuring systems; Amendment 127P;A4

IEC 60060-2-1994 高压试验技术.第2部分:测量系统High-voltage test techniques - Part 2: Measuring systems133P;A4

IEC 60060-4-1988 高压试验技术.第4部分:测量装置应用导则High-voltage test techniques. Part 4 : Application guide for measuring devices77P;A4

IEC 60061-1 AMD 21-1998灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.修改件21

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 1: Lamp caps; Amendment 2113P;A4





IEC 60061-1 AMD 24-2000具有可互换性和安全性控制的带量规的灯头和灯座.第1部分:灯头.修改件24














（12） 351

IEC标准目录


开本页数

IEC 60061-1-1969 灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头Lamp caps and holders together with gauges for the control of interchangeability and safety. Part1 : Lamp caps113P;A4

IEC 60061-1G-1977 灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头Lamp caps and holders together with gauges for the control of interchangeability and safety. Part1 : Lamp caps.5P;A4

IEC 60061-1H-1977 灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头Lamp caps and holders together with gauges for the control of interchangeability and safety. Part1 : Lamp caps.35P;A4

IEC 60061-1J-1980 灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头Lamp caps and holders together with gauges for the control of interchangeability and safety. Part1 : Lamp caps.15P;A4

IEC 60061-1K-1983 灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头Lamp caps and holders together with gauges for the control of interchangeability and safety. Part1 : Lamp caps.22P;A4

IEC 60061-1L-1987 灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头Lamp caps and holders together with gauges for the control of interchangeability and safety. Part1: Lamp caps.

IEC 60061-1M-1989灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.包括在活页中的补充件已加进IEC 60061-1标准中,它是

IEC 60061-1标准的第12次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety; part1: lamp caps; the sheets containes in this supplement are to be insertes in publication 60061-1;twelfth supplement to publication 60061-1:196964P;A4

IEC 60061-1N-1992灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.IEC 60061-1-69标准的第13次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety; part1: lamp caps; supplement 13 to IEC 60061-1:1969

IEC 60061-1P-1994灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.IEC 60061-1-69标准的第14次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety; part1: lamp caps; supplement 14 to IEC 60061-1(1969)43P;A4

IEC 60061-1Q-1994灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.IEC 60061-1-69标准的第15次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 1: Lamp caps; Supplement 15 to IEC 60061-1 (1969)22P;A4

IEC 60061-1R-1995灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.补充件16

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 1: Lamp caps; Supplement 1618P;A4

IEC 60061-1S-1996灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.补充件17


IEC 60061-1T-1996具有可互换性和安全性控制的带量规的灯头和灯座.第1部分:灯头.补充件18


（13） 351

IEC标准目录


开本页数

IEC 60061-1U-1996灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.补充件9


IEC 60061-1V-1997灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头.补充件20


IEC 60061-2 AMD 18-1998灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.修改件18

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 2: Lampholders; Amendment 1812P;A4





IEC 60061-2 AMD 21-2000具有可互换性和安全性控制的带量规的灯头和灯座.第2部分:灯座.修改件21














IEC 60061-2-1969 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座Lamp caps and holders together with gauges for the control of interchangeability and safety. Part2 : Lampholders38P;A4

（14） 351

IEC标准目录


开本页数

IEC 60061-2E-1977 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座Lamp caps and holders together with gauges for the control of interchangeability and safety. Part2 : Lampholders.13P;A4

IEC 60061-2F-1980 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座Lamp caps and holders together with gauges for the control of interchangeability and safety. Part2 : Lampholders.22P;A4

IEC 60061-2G-1983 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座Lamp caps and holders together with gauges for the control of interchangeability and safety. Part2 : Lampholders.33P;A4

IEC 60061-2H-1987 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座Lamp caps and holders together with gauges for the control of interchangeability and safety. Part2 : Lampholders.

IEC 60061-2J-1989 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座Lamp caps and holders together with gauges for the control of interchangeability and safety; part2: lampholders; ninth supplement to IEC 60061-2:196964P;A4

IEC 60061-2K-1992 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座Lamp caps and holders together with gauges for the control of interchangeability and safety; part2: lampholders; supplement 10 to IEC 61-2(1969)52P;A4

IEC 60061-2L-1994灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.IEC 60061-2-69标准的第11次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety; part2: lamp holders; supplement 11 to IEC 60061-2(1969)55P;A4

IEC 60061-2M-1994灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.IEC 60061-2-69标准的第12次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 2: Lampholders; Supplement 12 to IEC 60061-2 (1969)42P;A4

IEC 60061-2N-1995灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.补充件13

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 2: Lampholders; Supplement 1317P;A4

IEC 60061-2P-1996灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.补充件14


IEC 60061-2Q-1996灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.补充件15


IEC 60061-2R-1996灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.补充件16


IEC 60061-2S-1997灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座.补充件17


（15） 351

IEC标准目录


开本页数

IEC 60061-3 AMD 20-1998灯头、灯座及检验其互换性和安全性的量规.第3部分:量规.修改件20

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 3: Gauges; Amendment 2043P;A4





IEC 60061-3 AMD 23-2000具有可互换性和安全性控制的带量规的灯头和灯座.第3部分:量规.修改件23














IEC 60061-3-1969 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规Lamp caps and holders together with gauges for the control of interchangeability and safety. Part3 : Gauges124P;A4

IEC 60061-3G-1977 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规Lamp caps and holders together with gauges for the control of interchangeability and safety. Part3 : Gauges.22P;A4

IEC 60061-3H-1980 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规Lamp caps and holders together with gauges for the control of interchangeability and safety. Part3 : Gauges.32P;A4

（16） 351

IEC标准目录


开本页数

IEC 60061-3J-1983 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规Lamp caps and holders together with gauges for the control of interchangeability and safety. Part3 : Gauges.48P;A4

IEC 60061-3K-1987 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规Lamp caps and holders together with gauges for the control of interchangeability and safety. Part3 : Gauges ; 9th supplement

IEC 60061-3L-1989 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规Lamp caps and holders together with gauges for the control of interchangeability and safety; part3: gauges; eleventh supplement to IEC 60061-3:1969160P;A4

IEC 60061-3M-1992灯头、灯座及检验其互换性和安全性的量规.第3部分:量规.IEC 60061-3-69标准的第12次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety; part3: gauges; supplement 12 to IEC 60061-3:1969

IEC 60061-3N-1994灯头、灯座及检验其互换性和安全性的量规.第3部分:量规.IEC 60061-3-69标准的第13次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety; part3: gauges; supplement 13 to IEC 60061-3(1969)109P;A4

IEC 60061-3P-1994灯头、灯座及检验其互换性和安全性的量规.第3部分:量规.IEC 60061-3-69标准的第14次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 3: Gauges; Supplement 14 to IEC 60061-3 (1969)45P;A4

IEC 60061-3Q-1995具有可互换性和安全性控制的带量规的灯头和灯座.第3部分:量规.补充件15

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 3: Gauges; Supplement 1549P;A4

IEC 60061-3R-1996灯头、灯座及检验其互换性和安全性的量规.第3部分:量规.补充件16


IEC 60061-3S-1996灯头、灯座及检验其互换性和安全性的量规.第3部分:量规.补充件17


IEC 60061-3T-1996灯头、灯座及检验其互换性和安全性的量规.第3部分:量规.补充件18


IEC 60061-3U-1997 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 3: Gauges; Supplement 1928P;A4

IEC 60061-4 AMD 5-1998灯头、灯座及检验其互换性和安全性的量规.第4部分:导则

和一般信息.修改件5

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 4: Guidelines and general information; Amendment 520P;A4

IEC 60061-4 AMD 6-2000具有可互换性和安全性控制的带量规的灯头和灯座.第4部分:指南和一般信息.修改件6


IEC 60061-4 AMD 7-2001灯头、灯座及检验其互换性和安全性的量规.第4部分:导则

和一般信息.修改件7


（17） 351

IEC标准目录


开本页数

IEC 60061-4-1990灯头、灯座及检验其互换性和安全性的量规.第4部分:指南

和一般信息

Lamp caps and holders together with gauges for the control of interchangeability and safety; part4: guidelines and general information33P;A4

IEC 60061-4A-1992灯头、灯座及检验其互换性和安全性的量规.第4部分:指南

和一般信息.对IEC 61-4(1990)的补充件1

Lamp caps and holders together with gauges for the control of interchangeability and safety; part4: guidelines and general information; supplement 1 to IEC 61-4(1990)53P;A4

IEC 60061-4B-1994灯头、灯座及检验其互换性和安全性的量规.第4部分:导则

和通用资料.IEC 60061-4-90标准的第2次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety; part4: guidelines and general information; supplement 2 to IEC 60061-4(1990)14P;A4

IEC 60061-4C-1994灯头、灯座及检验其互换性和安全性的量规.第4部分:导则

和通用资料.IEC 60061-4-90标准的第3次补充

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 4: Guidelines and general information; Supplement 3 to IEC 60061-4 (1990)10P;A4

IEC 60061-4D-1995灯头、灯座及检验其互换性和安全性的量规.第4部分:导则

和通用资料.补充件4

Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 4: Guidelines and general information; Supplement 421P;A4

IEC 60062 AMD 1-1995 电阻器和电容器用标识代码.第1次修改Marking codes for resistors and capacitors; Amendment 13P;A4

IEC 60062-1992 电阻器和电容器的标志代码Marking codes for resistors and capacitors21P;A4

IEC 60063-1963 电阻器和电容器的优先数系Preferred number series for resistors and capacitors15P;A4

IEC 60064 AMD 2-2002 家用和类似用途的普通照明用钨丝灯.性能要求.修改件2Tungsten filament lamps for domestic and similar general ligthing purposes - Performancerequirements; Amendment 232P;A4

IEC 60064-1993 家用和类似普通照明用钨灯泡.性能要求Tungsten filament lamps for domestic and similar general ligthing purposes; performancerequirements66P;A4

IEC 60065-2001 音频、视频及类似电子设备的安全要求 Audio, video and similar electronic apparatus - Safety requirements

IEC 60067-1966 电子管尺寸Dimension of electronic tubes and valves216P;A4

IEC 60067A-1967 第1次补充Dimensions of electronic tubes and valves.28P;A4

IEC 60067B-1969 第2次补充Dimensions of electronic tubes and valves.22P;A4

IEC 60067C-1970 第3次补充Dimensions of electronic tubes and valves.6P;A4

IEC 60067D-1977 第4次补充Dimensions of electronic tubes and valves.12P;A4

IEC 60067E-1986 第5次补充Dimensions of electronic tubes and valves.19P;A4

（18） 351

IEC标准目录


开本页数

IEC 60068-1 AMD 1-1992 基本环境试验.第1部分:总则和导则.第1次修订Environmental testing; part 1: general and guidance; amendment 1 to IEC 60068-1:19883P;A4

IEC 60068-1-1988 环境试验.第1部分:总则和导则 Environmental testing. Part 1: General and guidance

IEC 60068-2-1 AMD 1-1993 第1次修改Environmental testing; part 2: tests; tests A: cold; amendment 13P;A4

IEC 60068-2-1 AMD 2-1994 第2次修改Environmental testing - Part 2: Tests - Test A: Cold; Amendment 27P;A4

IEC 60068-2-10-1988 环境试验.第2部分:试验.试验J和指南:长霉 Environmental testing. Part 2: Tests. Test J and guidance : Mould growth

IEC 60068-2-11-1981 基本环境试验程序.第2部分:试验.试验Ka:盐雾Basic environmental testing procedures. Part 2 : Tests. Test Ka: Salt mist11P;A4

IEC 60068-2-1-1990 环境试验.第2部分:试验.试验A:冷却Environmental testing; part 2: tests; tests A: cold43P;A4

IEC 60068-2-13-1983 环境试验.第2部分:试验.试验M:低气压Environmental testing. Part 2: Tests. Test M: Low air pressure13P;A4

IEC 60068-2-14 AMD 1-1986 基本环境试验程序.第2部分:试验.试验N:温度变化.修改件1 Basic environmental testing procedures. Part 2 : Tests. Test N: Change of temperature

IEC 60068-2-14-1984 基本环境试验程序.第2部分:试验.试验N:温度变化Basic environmental testing procedures. Part 2 : Tests. Test N: Change of temperature29P;A4

IEC 60068-2-17-1994 基本环境试验规程.第2部分:试验.试验Q-密封Basic environmental testing procedures - Part 2: Tests - Test Q: Sealing103P;A4

IEC 60068-2-18-2000 环境试验.第2-18部分:试验.试验R和指南:水Environmental testing - Part 2-18: Tests; Test R and guidance: Water75P;A4

IEC 60068-2-2 AMD 1-1993 第1次修改Basic environmental testing procedures; part 2: tests; tests B: dry heat; amendment 13P;A4

IEC 60068-2-2 AMD 2-1994 第2次修改Basic environmental testing procedures - Part 2: Tests - Test B: Dry heat; Amendment 27P;A4

IEC 60068-2-20 AMD 2-1987 基本环境试验规程.第2部分:试验.试验T:锡焊.第2次修订 Environmental testing. Part 2: Tests. Test T: Soldering

IEC 60068-2-20-1979 基本环境试验程序.第2部分:试验.试验T:锡焊Environmental testing. Part 2: Tests. Test T: Soldering52P;A4

IEC 60068-2-21-1999 环境试验.第2-21部分:试验U:终端坚固性和集成固定装置Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integralmounting devices

IEC 60068-2-2-1974 基本环境试验程序.第2部分:试验.试验B:干热Basic environmental testing procedures. Part 2 : Tests. Test B: Dry heat63P;A4

IEC 60068-2-27-1987 环境试验.第2部分:试验.试验Ea和导则:冲击Environmental testing. Part 2: Tests. Test Ea and guidance: Shock49P;A4

IEC 60068-2-29-1987 基本环境试验程序.第2部分:试验.试验Eb和导则:碰撞Basic environmental testing procedures. Part 2 : Tests. Test Eb and guidance: Bump29P;A4

IEC 60068-2-30 AMD 1-1985基本环境试验程序.第2部分:试验.试验Db和指南:交变湿热

(12+12小时循环).修改件1Basic environmental testing procedures. Part 2 : Tests. Test Db and guidance: Damp heat, cyclic(12 + 12-hour cycle)

（19） 351

IEC标准目录


开本页数

IEC 60068-2-30-1980基本环境试验程序.第2部分:试验.试验Db和指南:交变湿热

(12+12小时循环)

Basic environmental testing procedures. Part 2 : Tests. Test Db and guidance: Damp heat, cyclic(12 + 12-hour cycle)19P;A4

IEC 60068-2-31 AMD 1-1982基本环境试验程序.第2部分:试验.试验Ec:跌落和倾倒.主要

用于整机试验.修改件1Basic environmental testing procedures. Part 2 : Tests. Test Ec: Drop and topple, primarily forequipment-type specimens

IEC 60068-2-31-1969基本环境试验程序.第2部分:试验.试验Ec:跌落和倾倒.主要

用于整机试验

Basic environmental testing procedures. Part 2 : Tests. Test Ec: Drop and topple, primarily forequipment-type specimens13P;A4

IEC 60068-2-32 AMD 2-1990基本环境试验规程.第2部分:试验.试验Ed:自由跌落.第2次修订

Basic environmental testing procedures; part 2: tests; test Ed: free fall; amendment 2 to IEC60068-2-32:197511P;A4

IEC 60068-2-32-1975 基本环境试验程序.第2部分:试验.试验Ed:自由跌落Basic environmental testing procedures. Part 2 : Tests. Test Ed: Free fall17P;A4

IEC 60068-2-33 AMD 1-1978 基本环境试验程序.第2部分:试验.温度变化试验指南.修改 Basic environmental testing procedures. Part 2 : Tests. Guidance on change of temperature tests

IEC 60068-2-33-1971 基本环境试验程序.第2部分:试验.第33节:温度变化试验指

南

Basic environmental testing procedures. Part 2 : Tests. Guidance on change of temperature tests13P;A4

IEC 60068-2-38-1974 环境试验.第2部分:试验.第38节:试验Z/AD:温度/湿度综合

循环试验

Environmental testing. Part 2: Tests. Test Z/AD: Composite temperature/humidity cyclic test20P;A4

IEC 60068-2-39-1976基本环境试验程序.第2部分:试验.第39节:试验Z/AMD:低温

、低气压和湿热综合连续试验

Basic environmental testing procedures. Part 2 : Tests. Test Z/AMD: Combined sequential cold,low air pressure, and damp heat test9P;A4

IEC 60068-2-40 AMD 1-1983基本环境试验程序.第2部分:试验.第40节:试验Z/AM:低温/低气压综合试验.第1次修改

Basic environmental testing procedures. Part 2 : Tests. Test Z/AM: Combined cold/low airpressure tests

IEC 60068-2-40-1976基本环境试验程序.第2部分:试验.第40节:试验Z/AM:低温/低气压综合试验

Basic environmental testing procedures. Part 2 : Tests. Test Z/AM: Combined cold/low airpressure tests20P;A4

IEC 60068-2-41 AMD 1-1983基本环境试验程序.第2部分:试验.第41节:试验Z/BM:干热/低气压综合试验.第1次修改

Basic environmental testing procedures. Part 2 : Tests. Test Z/BM: Combined dry heat/low airpressure tests

IEC 60068-2-41-1976基本环境试验程序.第2部分:试验.第41节:试验Z/BM:干热/低气压综合试验

Basic environmental testing procedures. Part 2 : Tests. Test Z/BM: Combined dry heat/low airpressure tests19P;A4

IEC 60068-2-42-1982基本环境试验规程.第2部分:试验.试验Kc:接触点和连接件

的二氧化硫试验

Basic environmental testing procedures. Part 2 : Tests. Test Kc: Sulphur dioxide test for contactsand connections14P;A4

IEC 60068-2-43-1976基本环境试验规程.第2部分:试验.第42节:试验Kd:接触和连

接件的硫化氢试验

Basic environmental testing procedures. Part 2 : Tests. Test Kd: Hydrogen sulphide test forcontacts and connections14P;A4

IEC 60068-2-44-1995 基本环境试验规程.第2部分:试验.第44节:试验T指南:锡焊Environmental testing - Part 2: Tests; Guidance on test T: Soldering45P;A4

（20） 351

IEC标准目录


开本页数

IEC 60068-2-45 AMD 1-1993 第1次修改Basic environmental testing procedures; part 2: tests; test XA and guidance: immersion incleaning solvents; amendment 13P;A4

IEC 60068-2-45-1980 基本环境试验程序.第2部分:试验.试验XA和导则:在清洗剂

中浸渍

Environmental testing. Part 2: Tests. Test XA and guidance: Immersion in cleaning solvents20P;A4

IEC 60068-2-46-1982基本环境试验规程.第2部分:试验.第46节:试验Kd指南:接触

点和连接件的硫化氢试验

Basic environmental testing procedures. Part 2 : Tests. Guidance to Test Kd: Hydrogen sulphidetest for contacts and connections23P;A4

IEC 60068-2-47-1999环境试验.第2-47部分:试验方法.振动、冲击及相似动态试

验用的元件、设备和其它物品的安装

Environmental testing - Part 2-47: Test methods - Mounting of components, equipment and otherarticles for vibration, impact and similar dynamic tests37P;A4

IEC 60068-2-48-1982基本环境试验程序.第2部分:试验.第48节:模拟贮存效应的

IEC标准68试验的应用导则

Basic environmental testing procedures. Part 2 : Tests. Guidance on the application of the testsof IEC publication 60068 to simulate the effects of storage11P;A4

IEC 60068-2-49-1983基本环境试验规程.第2部分:试验.第49节:试验Kc导则:接触

点和连接件的二氧化硫试验

Basic environmental testing procedures. Part 2 : Tests. Guidance to Test Kc: Sulphur dioxide testfor contacts and connections19P;A4

IEC 60068-2-50-1983基本环境试验程序.第2部分:试验.第50节:试验Z/AFc:散热

和非散热试验样品的低温/振动正弦综合试验

Basic environmental testing procedures. Part 2 : Tests. Tests Z/AFc: Combined cold/vibration(sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens21P;A4

IEC 60068-2-51-1983基本环境试验程序.第2部分:试验.第51节:试验Z/BFc:散热

和非散热试验样品的干热/振动正弦综合试验

Basic environmental testing procedures; part 2: tests; test Z/BFc: combined dry heat/vibration(sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens21P;A4

IEC 60068-2-5-1975 环境试验.第2部分:试验.试验Sa:在地平面模拟太阳辐射Environmental testing. Part 2: Tests. Test Sa: Simulated solar radiation at ground level11P;A4

IEC 60068-2-52-1996 环境试验.第2部分:试验.试验Kb:盐雾,循环(氯化钠溶液)Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)21P;A4

IEC 60068-2-53-1984基本环境试验规程.第2部分:试验.第53节:试验Z/AFc和Z/BFc指南:温度(低温和干热)和振动正弦综合试验

Basic environmental testing procedures. Part 2 : Tests. Guidance to Tests Z/AFc and Z/BFc :Combined temperature (cold and dry heat) and vibration (sinusoidal) tests.10P;A4

IEC 60068-2-54-1985基本环境试验规程.第2部分:试验.第54节:试验Ta:锡焊.润湿

平衡法可焊性试验

Environmental testing. Part 2: Tests. Test TA: Soldering. Solderability testing by the wettingbalance method27P;A4

IEC 60068-2-55-1987 环境试验.第2部分:试验.试验Ee及导则:颤动 Environmental testing. Part 2: Tests. Test Ee and guidance : Bounce.

IEC 60068-2-57-1999 环境试验.第2-57部分:试验.试验Ff:振动.时间过程分析法Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history method61P;A4

IEC 60068-2-58-1999环境试验.第2-58部分:试验Td:可焊接性的试验方法,金属熔

化抗性和表面固定装置(SMD)的焊接热量

Environmental testing - Part 2-58: Tests - Test Td - Test methods for solderability, resistance todissolution of metallization and to soldering heat of surface mounting devices (SMD)

IEC 60068-2-59-1990 环境试验.第2部分:试验.第59节:试验Fe:振动;正弦跳动法Environmental testing; part 2: tests methods; test Fe: vibration; sine-beat method50P;A4

（21） 351

IEC标准目录


开本页数

IEC 60068-2-60-1995 环境试验.第2部分:试验.试验Ke:流动混合气体的腐蚀试验Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test41P;A4

IEC 60068-2-61-1991 基本环境试验规程.第2部分:试验.第61节:试验2/ABDM.气候顺序

Environmental testing; part 2: test methods; test Z/ABDM: climatic sequence33P;A4

IEC 60068-2-6-1995 基本环境试验规程.第2部分:试验.第6节:试验Fc:振动(正弦

波)

Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal)87P;A4

IEC 60068-2-64-1993基本环境试验规程.第2部分:试验.试验Fh:振动、宽带随机

抽样(数字控制)

Environmental testing; part 2: test methods; test Fh: vibration, broad-band random (digitalcontrol) and guidance85P;A4

IEC 60068-2-65-1993 环境试验.第2部分:试验方法.Fg试验.振动导致声音Environmental testing; part 2: methods of test; test Fg; vibration, acoustically induced57P;A4

IEC 60068-2-66-1994基本环境试验规程.第2部分:试验方法.试验Cx:稳态湿热(非饱合加压水蒸气)

Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturatedpressurized vapour)33P;A4

IEC 60068-2-67-1995基本环境试验规程.第2部分:试验.第67节:试验Cy:主要用于

组成成分的湿热、稳定状态下的加速试验

Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated testprimarily intended for components17P;A4

IEC 60068-2-68-1994 环境试验.第2部分:试验.试验L:砂尘Environmental testing - Part 2: Tests - Test L: Dust and sand127P;A4

IEC 60068-2-69-1995基本环境试验规程.第2部分:试验.第69节:试验Te:润湿平衡

法对表面镶嵌技术用电子元件的软钎焊试验

Environmental testing - Part 2: Tests - Test Te: Solderability testing of electronic components forsurface mount technology by the wetting balance method43P;A4

IEC 60068-2-7 AMD 1-1986 基本环境试验程序.第2部分:试验.试验Ga和指南:稳态加速

度.

Basic environmental testing procedures. Part 2 : Tests. Test Ga and guidance: Acceleration,steady state

IEC 60068-2-70-1995基本环境试验规程.第2部分:试验.第70节:试验Xb:手和手指

磨擦引起的符号及文字的磨蚀

Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused byrubbing of fingers and hands19P;A4

IEC 60068-2-7-1983基本环境试验程序.第2部分:试验.试验Ga和指南:稳态加速

度

Basic environmental testing procedures. Part 2 : Tests. Test Ga and guidance: Acceleration,steady state23P;A4

IEC 60068-2-74-1999 环境试验.第2部分:试验.试验Xc:液体污染Environmental testing - Part 2: Tests - Test Xc: Fluid contamination25P;A4

IEC 60068-2-75-1997 环境试验.第2部分:试验.试验Eh:锤击试验Environmental testing - Part 2: Tests - Test Eh: Hammer tests67P;A4

IEC 60068-2-77-1999 环境试验.第2-77部分:试验77:整体强度和冲击 Environmental testing - Part 2-77: Tests - Test 77 - Body strength and impact shock

IEC 60068-2-78-2001 环境试验.第2-78部分:试验.试验室:湿热、稳定状态Environmental testing - Part 2-78: Tests; Test Cab: Damp heat, steady state13P;A4

IEC 60068-2-9 AMD 1-1984 环境试验.第2部分:试验.太阳辐射试验导则.修改件1 Environmental testing. Part 2: Tests. Guidance for solar radiation testing

IEC 60068-2-9-1975 环境试验.第2部分:试验.第9节:太阳辐射试验导则Environmental testing. Part 2: Tests. Guidance for solar radiation testing34P;A4

（22） 351

IEC标准目录


开本页数

IEC 60068-3-1-1974基本环境试验程序.第3部分:基本材料.第1节:低温和干热试

验

Basic environmental testing procedures. Part 3 : Background information. Section One - Coldand dry heat tests59P;A4

IEC 60068-3-1A-1978 基本环境试验程序.第3部分:基本材料.第1节:低温和干热试

验

Basic environmental testing procedures. Part 3 :. Section One - Cold and dry heat tests.7P;A4

IEC 60068-3-2-1976基本环境试验程序.第3部分:基本材料.第2节:温度/低气压综

合试验

Basic environmental testing procedures. Part 3 : Background information. Section Two -Combined temperature/low air pressure tests12P;A4

IEC 60068-3-3-1991 基本环境试验规程.第3部分:导则.设备的地震试验方法Environmental testing; part 3: guidance; seismic test methods for equipments83P;A4

IEC 60068-3-4-2001 环境试验.第3-4部分:配套文献和导则、湿热试验Environmental testing - Part 3-4: Supporting documentation and guidance; Damp heat tests31P;A4

IEC 60068-3-5-2001 环境试验.第3-5部分:配套文献和导则.温度室功能的确定Environmental testing - Part 3-5: Supporting documentation and guidance; Confirmation of theperformance of temperature chambers21P;A4

IEC 60068-3-6-2001环境试验.第3-6部分:配套文献和导则.温度/潮湿室功能的

确认

Environmental testing - Part 3-6: Supporting documentation and guidance; Confirmation of theperformance of temperature/humidity chambers19P;A4

IEC 60068-3-7-2001环境试验.第3-7部分:配套文献和指南.试验A和B用温度室

的测量(加载)

Environmental testing - Part 3-7: Supporting documentation and guidance; Measurements intemperature chambers for test A and B (with load)19P;A4

IEC 60068-4 AMD 1-1992 第1次修改Basic environmental testing procedures; part 4: information for specification writers; testsummaries; amendment 171P;A4

IEC 60068-4 AMD 2-1994基本环境试验程序.第4部分:技术规格编制者用材料.试验总

结.修改件2

Basic environmental testing procedures; part 4: information for specification writers; testsummaries; amendment 235P;A4

IEC 60068-4-1987 基本环境试验程序.第4部分:规范编制者用信息.试验总结 Basic environmental testing procedures. Part 4 : Information for specification writers. Test

IEC 60068-5-2-1990 环境试验.第5部分:起草试验方法导则.术语和定义Environmental testing; part 5: guide to drafting of test methods; terms and definitions27P;A4

IEC 60071-1-1993 绝缘配合.第1部分:定义、原理和规则Insulation co-ordination - Part 1: Definitions, principles and rules47P;A4

IEC 60071-2-1996 绝缘配合.第2部分:应用导则Insulation co-ordination - Part 2: Application guide251P;A4

IEC 60072-1-1991旋转电机尺寸和输出系列.第1部分:机座号:56-400,凸缘

号:55-1080

Dimensions and output series for rotating electrical machines; part 1: frame numbers 56 to 400and flange numbers 55 to 1080127P;A4

IEC 60072-2-1990旋转电机尺寸和输出系列.第2部分:机座号:355-1000,凸缘

号:1180-2360

Dimensions and output series for rotating electrical machines; part 2: frame numbers 355 to 1000and flange numbers 1180 to 236029P;A4

（23） 351

IEC标准目录


开本页数

IEC 60072-3-1994旋转电机尺寸和输出系列.第3部分:小型内装式发动机,凸缘

号:BF10-BF50

Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flangenumbers BF10 to BF507P;A4

IEC 60073-2002人-机接口,标记和鉴别用的基本原理和安全原则.指示设备

和调节器的编码原理

Basic and safety principles for man-machine interface, marking and identification - Codingprinciples for indicators and actuators61P;A4

IEC 60076-1 AMD 1-1999 电力变压器.第1部分:总则.修改件1Power transformators - Part 1: General; Amendment 13P;A4

IEC 60076-1 Edition 2.1-2000 电力变压器.第1部分:总则Power transformators - Part 1: General89P;A4

IEC 60076-10-2001 电力变压器.第10部分:声级的测定Power transformers - Part 10: Determination of sound levels35P;A4

IEC 60076-2-1993 电力变压器.第2部分:温升Power transformers; part 2: temperature rise57P;A4

IEC 60076-3-2000 电力变压器.第3部分:空气中绝缘水平、介电试验和外清洁

性

Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air107P;A4

IEC 60076-4-2002电力变压器.第4部分:闪电脉冲和开关脉冲试验指南.电力变

压器和反应器

Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing; Powertransformers and reactors123P;A4

IEC 60076-5-2000 电力变压器.第5部分:耐短路性Power transformers - Part 5: Ability to withstand short circuit43P;A4

IEC 60076-8-1997 电力变压器.第8部分:应用指南Power transformers - Application guide167P;A4

IEC 60077-1-1999铁路设施.机车车辆用电力设备.第1部分:一般服务条件和一

般规则

Railway applications - Electric equipment for rolling stock - Part 1: General service conditions andgeneral rules115P;A4

IEC 60077-2-1999铁路设施.机车车辆用电气设备.第2部分:电工技术元件.一般规则

Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components -General rules63P;A4

IEC 60077-3-2001铁路设施.机车车辆用电气设备.第3部分:电工元件.直流断

路器规则

Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components;Rules for d.c. circuit-breakers53P;A4

IEC 60077-4-2003铁路设施.机车车辆用电气设备.第4部分:电工元件.交流断

路器规则

Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components;Rules for AC circuit-breakers58P;A4

IEC 60078-1967 射频同轴电缆的特性阻抗和尺寸Characteristic impedances and dimensions of radio-frequency coaxial cables11P;A4

IEC 60079-0 AMD 1-2000 易爆气体环境中的电气设备.第0部分:一般要求.修改件1Electrical apparatus for explosive gas atmospheres - Part 0: General requirements; Amendment1

（24） 351

IEC标准目录


开本页数

IEC 60079-0 Edition 3.1-2000 易爆气体环境中的电气设备.第0部分:一般要求Electrical apparatus for explosive gas atmospheres - Part 0: General requirements107P;A4

IEC 60079-0-1998 易爆气体环境中的电气设备.第0部分:一般要求.Electrical apparatus for explosive gas atmospheres - Part 0: General requirements107P;A4

IEC 60079-10-2002 爆炸性气体环境用电气设备.第10部分:危险场所的分类Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas115P;A4

IEC 60079-11-1999 防爆电气设备.第11部分:原设计安全性"i"Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety "i"185P;A4

IEC 60079-1-1-2002易爆气体环境中的电气设备.第1-1部分:防火外壳"d".断定

大实验安全间隙的试验方法

Electrical apparatus for explosive gas atmospheres - Part 1-1: Flameproof enclosures "d";Method of test for ascertainment of maximum experimental safe gap19P;A4

IEC 60079-1-2001 易爆气体环境中的电气设备.第1部分:防火外壳"d"Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures "d"53P;A4

IEC 60079-14-2002爆炸性气体环境的电气设备.第14部分:危险场所(矿井除外)中的电气装置

Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardousareas (other than mines)121P;A4

IEC 60079-15-2001 爆炸性气体环境用电气设备.第15部分:"n"防护型电气设备Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection "n"74P;A4

IEC 60079-17-2002易爆气体环境中的电气设备.第17部分:危险场所(矿井除外)电气设备的检验和维护

Electrical apparatus for explosive gas atmospheres - Part 17: Inspection and maintenance ofelectrical installations in hazardous areas (other than mines)49P;A4

IEC 60079-18-1992 防爆电气设备.第18部分:封装"m"Electrical apparatus for explosive gas atmospheres; part 18: encapsulation "m"49P;A4

IEC 60079-19-1993防爆电气设备.第19部分:防爆电气设备(矿井或爆炸除外)的修理和检修

Electrical apparatus for explosive gas atmospheres; part 19: repair and overhaul for apparatusused in explosive atmospheres (other than mines or explosives)87P;A4

IEC 60079-2-2001 易爆气体环境中的电气设备.第2部分:增压外壳"p"Electrical apparatus for explosive gas atmospheres - Part 2: Pressurized enclosures "p"95P;A4

IEC 60079-4 AMD 1-1995 防爆电气设备.第4部分:着火温度试验方法.修改件1Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignitiontemperature; Amendment 13P;A4

IEC 60079-4-1975 防爆电气设备.第4部分:点燃温度试验方法Electrical apparatus for explosive gas atmospheres. Part 4 : Method of test for ignitiontemperature

IEC 60079-4A-1970 第1次补充Electrical apparatus for explosive gas atmospheres. Part 4 : Method of test for ignitiontemperature. First supplement5P;A4

IEC 60079-5-1997 爆炸性气体环境中使用的电气设备.第5部分:q型Electrical apparatus for explosive gas atmospheres - Part 5: Powder filling "q"25P;A4

IEC 60079-6-1995 防爆电气设备.第6部分:"O"型油浸Electrical apparatus for explosive gas atmospheres - Part 6: Oil-immersion "o"19P;A4

（25） 351

IEC标准目录


开本页数

IEC 60079-7-2001 爆炸性气体环境用电气设备.第7部分:增安型"e"Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety "e"129P;A4

IEC 60081 AMD 1-2000 双端荧光灯.性能规范.修改件1Double-capped fluorescent lamps - Performance specifications; Amendment 185P;A4

IEC 60081 Edition 5.1-2002 双头荧光灯.性能规范 Double-capped fluorescent lamps - Performance specifications

IEC 60081-1997 双端荧光灯.性能规范Double-capped fluorescent lamps - Performance specifications311P;A4

IEC 60085-1984 电绝缘的热评定和分类Thermal evaluation and classification of electrical insulation17P;A4

IEC 60086-1-2000 原电池.第1部分:总则Primary batteries - Part 1: General46P;A4

IEC 60086-2 AMD 1-2001 原电池.第2部分:物理和电气规范.修改件1Primary batteries - Part 2: Physical and electrical specifications; Amendment 17P;A4

IEC 60086-2 Edition 10.1-2001 原电池.第2部分:物理和电气规范Primary batteries - Part 2: Physical and electrical specifications50P;A4

IEC 60086-2-2000 原电池.第2部分:物理和电气规范Primary batteries - Part 2: Physical and electrical specifications50P;A4

IEC 60086-4-2000 原电池.第4部分:锂电池的安全性Primary batteries - Part 4: Safety of lithium batteries33P;A4

IEC 60086-5-2000 原电池.第5部分:含水电解液电池组的安全Primary batteries - Part 5: Safety of batteries with aqueous electrolyte27P;A4

IEC 60092-101 AMD 1-1995 船用电气装置.第101部分:定义和一般要求.第一次修改Electrical installations in ships - Part 101: Definitions and general requirements; Amendment 19P;A4

IEC 60092-101 Edition 4.1-2002

船用电气装置.第101部分:定义和一般要求Electrical installations in ships - Part 101: Definitions and general requirements67P;A4

IEC 60092-101-1994 船上电气安装.第101部分:定义和总则Electrical installations in ships - Part 101: Definitions and general requirements63P;A4

IEC 60092-201-1994 船用电气装置.第201部分:系统设计.通则Electrical installations in ships - Part 201: System design - General78P;A4

IEC 60092-202 AMD 1-1996 船用电气装置.第202部分:系统设计.保护.补充件1Electrical installations in ships - Part 202: System design - Protection; Amendment 111P;A4

IEC 60092-202-1994 船用电气装置.第202部分:系统设计.保护Electrical installations in ships; part 202: system design; protection29P;A4

IEC 60092-203-1985 船用电气装置.第203部分:系统设计-声和光信号Electrical installations in ships. Part 203: System design - Acoustic and optical signals17P;A4

IEC 60092-204-1987 船用电气设施.第204部分:系统设计.电力和电动液压传动操 Electrical installations in ships. Part 204 : System design. Electric and electrohydraulic steering

IEC 60092-3 AMD 1-1969 船用电气装置.第3部分:电缆(结构、试验和敷设).第1次修 Electrical installations in ships. Part 3 : Cables (construction, testing and installations)



（26） 351

IEC标准目录


开本页数




IEC 60092-301 AMD 1-1994 第1次修改Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 13P;A4

IEC 60092-301 AMD 2-1995 船用电气装置.第301部分:设备-发电机和电动机.修改件2Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 23P;A4

IEC 60092-301-1980 船用电气装置.第301部分:设备-发电机和电动机Electrical installations in ships. Part 301 : Equipment - Generators and motors35P;A4

IEC 60092-302-1997 船用电气设施.第302部分:低电压开关设备和控制设备组件Electrical installations in ships - Part 302: Low-voltage switchgear and controlgear assemblies47P;A4

IEC 60092-303 AMD 1-1997船用电气装置.第303部分:设备-电力变压器和照明变压器.第1次修改

Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting;Amendment 15P;A4

IEC 60092-303-1980 船舶电气设施.第303部分:设备.电力变压器和照明变压器Electrical installations in ships. Part 303 : Equipment - Transformers for power and lighting11P;A4

IEC 60092-304 AMD 1-1995 船用电气装置.第304部分:设备-半导体变流器.第1次修改Electrical installations in ships - Part 304: Equipment - Semiconductor convertors; Amendment 13P;A4

IEC 60092-304-1980 船用电气装置.第304部分:设备-半导体变流器Electrical installations in ships. Part 304 : Equipment - Semiconductor convertors13P;A4

IEC 60092-305 AMD 1-1989 船用电气装置.第305部分:设备-蓄电池.第1次修改Electrical installations in ships; part 305: equipment; accumulator (storage) batteries; amendmentNo. 1 to publication 60092-305:19803P;A4

IEC 60092-305-1980 船用电气装置.第305部分:设备-蓄电池Electrical installations in ships. Part 305 : equipment - Accumulator (storage) batteries11P;A4

IEC 60092-306-1980 船用电气装置.第306部分:设备.照明装置和附件Electrical installations in ships. Part 306 : Equipment - Luminaires and accessories19P;A4

IEC 60092-307-1980 船用电气装置.第307部分:设备.电热器和灶具Electrical installations in ships. Part 307 : Equipment - Heating and cooking appliances15P;A4

IEC 60092-3-1965 船用电气装置.第3部分:电缆(结构、试验和敷设)Electrical installations in ships. Part 3 : Cables (construction, testing and installations)200P;A4

IEC 60092-350-2001船用电气装置.第350部分:船用电力电缆.通用建造和试验要

求

Electrical installations in ships - Part 350: Shipboard power cables - General construction andtest requirements44P;A4

IEC 60092-351-2000船中的电力装置.第351部分:船甲板和移动和固定的近海设

备用电力,通信和控制数据电缆用绝缘材料

Electrical installations in ships - Part 351: Insulating materials for shipboard and mobile and fixedoffshore units, power, telecommunication, and control data cables31P;A4

IEC 60092-352 AMD 1-1998船用电气装置.低压电力系统用电缆的选择和安装.第1次修

订

Electrical installations in ships - Part 352: Choice and installation of cables for low-voltage powersystems; Amendment 13P;A4

（27） 351

IEC标准目录


开本页数

IEC 60092-352-1997 船用电气装置.低压电力系统用电缆的选择和安装Electrical installations in ships - Choice and installation of cables for low-voltage power systems55P;A4

IEC 60092-353 AMD 1-2001船用电气装置.第353部分:额定电压为1KV和3KV、挤压固

体绝缘的单芯和多芯非辐射场动力电缆.修改件1

Electrical installations in ships - Part 353: Single and multicore non-radial field power cables withextruded solid insulation for rated voltages 1 kV and 3 kV; Amendment 113P;A4

IEC 60092-353-1995船用电气装置.第353部分:标定电压为1KV和3KV、挤压固

体绝缘的单芯和多芯电缆

Electrical installations in ships - Part 353: Single and multicore non-radial field power cables withextruded solid insulation for rated voltages 1 kV and 3 kV23P;A4

IEC 60092-354-1994船用电气装置.第354部分:标称电压为6KV,10KV和15KV带模压固体装置的单芯和三芯电力电缆

Electrical installations in ships; part 354: single- and three-core power cables with extruded solidinsulation for rated voltages 6 kV, 10 kV and 15 kV31P;A4

IEC 60092-359 AMD 1-1994 船上电气安装.第359部分:船板和通信电缆同性铠装材料Electrical installations in ships - Part 359: Sheathing materials for shipboard power andtelecommunication cables; Amendment 17P;A4

IEC 60092-359 AMD 2-1999船用电气安装.第359部分:船上点缆和通讯电缆的护套材料.补充件2

Electrical installations in ships - Part 359: Sheathing materials for shipboard power andtelecommunication cables; Amendment 25P;A4

IEC 60092-359 Edition 1.2-1999

船上电气安装.第359部分:船上动力和通信电缆用铠装材料Electrical installations in ships - Part 359: Sheathing materials for shipboard power andtelecommunication cables17P;A4

IEC 60092-359-1987 船用电气装置.第359部分:船用电力电缆和电信用电缆的护

套材料

Electrical installations in ships. Part 359 : Sheathing materials for shipboard power andtelecommunication cables

IEC 60092-373-1977船用电气装置.第373部分:船用通信电缆和射频电缆.船用软

同轴电缆

Electrical installations in ships. Part 373 : Shipboard telecommunication cables and radio-frequency cables. Shipboard coaxial cables3P;A4

IEC 60092-374-1977船用电气装置.第374部分:船用通信电缆和射频电缆.非重要

通信业务用电话电缆

Electrical installations in ships. Part 374 : Shipboard telecommunication cables and radio-frequency cables. Telephone cables for non-essential communication cables14P;A4

IEC 60092-375-1977船用电气装置.第375部分:船用通信电缆和射频电缆.一般仪

器仪表、控制和通信电缆

Electrical installations in ships. Part 375 : Shipboard telecommunication cables and readio-frequency cables. General instrumentation, control and communication cables24P;A4

IEC 60092-376-1983 船用电气装置.第376部分:船上控制电路用多芯电缆Electrical installations in ships. Part 376 : Shipboard multicore cables for control circuits19P;A4

IEC 60092-401 AMD 1-1987 船用电气装置.第401部分:安装和安装完工的试验.第1次修 Electrical installations in ships. Part 401 : Installation and test of completed installation

IEC 60092-401 AMD 2-1997 船用电气装置.第401部分:安装和安装完工后的试验.修改件

2

Electrical installations in ships - Part 401: Installation and test of completed installation;Amendment 2

IEC 60092-401-1980 船用电气装置.第401部分:安装和安装完工的试验Electrical installations in ships. Part 401 : Installation and test of completed installation55P;A4

IEC 60092-501-1984 船用电气装置.第501部分:专用装置.电力推进装置Electrical installations in ships. Part 501 : Special features - electric propulsion plant.29P;A4

（28） 351

IEC标准目录


开本页数

IEC 60092-502-1999 船用电气装置.第502部分:油轮.专用装置Electrical installations in ships - Part 502: Tankers - Special features44P;A4

IEC 60092-503-1975船用电气装置.第503部分:专用装置.1KV以上至11KV(含)电压的交流供电系统

Electrical installations in ships. Part 503 : Special features. A.C. supply systems with voltages inthe range above 1 kV up to and including 11 kV19P;A4

IEC 60092-504-2001 船用电气装置.第504部分:专用装置.控制和仪表装置Electrical installations in ships - Part 504: Special features; Control and instrumentation57P;A4

IEC 60092-506-1996船用电气装置.第506部分:专用装置.大容积车载特殊危险商

品和危险材料

Electrical installations in ships - Part 506: Special features - Ships carrying specific dangerousgoods and materials hazardous only in bulk25P;A4

IEC 60092-507-2000 船用电气装置.第507部分:游艇Electrical installations in ships - Part 507: Pleasure craft69P;A4

IEC 60093-1980 固体电气绝缘材料体积电阻系数和表面电阻系数的试验方法

Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials40P;A4

IEC 60094-1 AMD 1-1994 第1次修改Magnetic tape sound recording and reproducing systems - Part 1: General conditions andrequirements; Amendment 15P;A4

IEC 60094-10-1988 磁带录音和放音系统.第10部分:时间码和地址码 Magnetic tape sound recording and reproducing systems. Part 10: Time and address codes

IEC 60094-11-1988 磁带录音和放音系统.第11部分:小型盒式录音磁带的地址

码

Magnetic tape sound recording and reproducing systems. Part 11: Address code for compactcassettes.

IEC 60094-1-1981 磁带录音和放音系统.第1部分:一般条件和要求Magnetic tape sound recording and reproducing systems. Part 1 : General conditions andrequirements43P;A4

IEC 60094-2-1994 磁带录音和放音系统.第2部分:校准磁带Magnetic tape recording and reproducing systems - Part 2: Calibration tapes13P;A4

IEC 60094-3 AMD 2-1988磁带录音和放音系统.第3部分:磁带录音和放音设备特性的

测量方法.修改件2Magnetic tape sound recording and reproducing systems. Part 3: Methods of measuring thecharacteristics of recording and reproducing equipment for sound on magnetic tape

IEC 60094-3 AMD 3-1996磁带录音和放音系统.第3部分:磁带录音和放音设备特性的

测量方法.第3次修改

Magnetic tape sound recording and reproducing systems - Part 3: Methods of measuring thecharacteristics of recording and reproducing equipment for sound on magnetic tape; Amendment3

IEC 60094-3-1979磁带录音和放音系统.第3部分:磁带录音和放音设备特性的

测量方法

Magnetic tape sound recording and reproducing systems. Part 3 : Methods of measuring thecharacteristics of recording and reproducing equipment for sound on magnetic tape56P;A4

IEC 60094-4 AMD 1-1994 第1次修改Magnetic tape sound recording and reproducing systems - Part 4: Mechanical magnetic tapeproperties; Amendment 18P;A4

IEC 60094-4-1986 磁带录音和放音系统.第4部分:磁带的机械特性Magnetic tape sound recording and reproducing systems. Part 4 : Mechanical magnetic tapeproperties26P;A4

（29） 351

IEC标准目录


开本页数

IEC 60094-5 AMD 1-1996 磁带录音和放音系统.第5部分:磁带的电特性.第1次修改Magnetic tape sound recording and reproducing systems - Part 5: Electrical magnetic tapeproperties; Amendment 111P;A4

IEC 60094-5-1988 磁带录音和放音系统.第5部分:磁带的电特性 Magnetic tape sound recording and reproducing systems.. Part 5: Electrical magnetic tape

IEC 60094-6-1985 磁带录音和放音系统.第6部分:双卷盘式磁带系统Magnetic tape sound recording and reproducing systems. Part 6 : Reel-to-reel systems34P;A4

IEC 60094-7 AMD 1-1996磁带录音和放音系统.第7部分:商用和家用盒式录音磁带.第1次修改

Magnetic tape sound recording and reproducing systems - Part 7: Cassette for commercial taperecords and domestic use; Amendment 13P;A4

IEC 60094-7-1986 磁带录音和放音系统.第7部分:商用和家用盒式录音磁带Magnetic tape sound recording and reproducing systems. Part 7 : Cassette for commercial taperecords and domestic use25P;A4

IEC 60095-1-2000 铅酸启动电池组.第1部分:一般要求和试验方法Lead-acid starter batteries - Part 1: General requirements and methods of test41P;A4

IEC 60095-2 AMD 1-1991 第1次修改Lead-acid starter batteries; part 2: dimensions of batteries and dimensions and marking ofterminals; amendment 115P;A4

IEC 60095-2 AMD 2-1993 第2次修改Lead-acid starter batteries; Part 2: dimensions of batteries and dimensions and marking ofterminals; amendment 26P;A4

IEC 60095-2-1984 铅酸起动电池组.第2部分:蓄电池尺寸和端子尺寸及标志Lead-acid starter batteries. Part 2 : Dimensions of batteries and dimensions and marking ofterminals

IEC 60095-4 AMD 1-1996 启动用铅酸蓄电池.第4部分:重型卡车用的蓄电池的尺寸.补充件1

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy trucks; Amendment 113P;A4

IEC 60095-4-1989 启动用铅酸蓄电池.第4部分:重型卡车用的蓄电池的尺寸Lead-acid starter batteries; part 4: dimensions of batteries for heavy trucks12P;A4

IEC 60096-0-1 AMD 1-2000射频电缆规范.第0部分:详细规范制订导则.第1章:共轴电缆.修改件1

Radio-frequency cables - Part 0: Guide to the design of detailed specifications; Section One:Coaxial cables; Amendment 19P;A4

IEC 60096-0-1 Edition 2.1-2000 射频电缆.第0部分:详细规范制订导则.第1章:同轴电缆Radio frequency cables - Part 0: Guide to the design of detail specifications; Section 1: Coaxialcables

IEC 60096-0-1-1990 射频电缆规范.第0部分:详细规范制订导则.第1章:共轴电缆Radio-frequency cables; part 0: guide to the design of detail specifications; section 1: coaxialcables

IEC 60096-1 AMD 2-1993 第2次修改Radio-frequency cables; Part 1: general requirements and measuring methods; amendment 247P;A4

IEC 60096-1-1986 射频电缆.第1部分:一般要求和测量方法Radio-frequency cables. Part 1 : General requirements and measuring methods85P;A4

IEC 60096-2 AMD 1-1990 射频电缆规范.第2部分:相关电缆规范.第1次修改Radio-frequency cables; part 2: relevant cable specifications; amendment No. 1 to IEC 60096-2:1961

（30） 351

IEC标准目录


开本页数

IEC 60096-2-1988 射频电缆规范.第2部分:相关电缆规范Radio-frequency cables; part 2: relevant cable specifications38P;A4

IEC 60096-3-1982射频电缆.第3部分:电缆配电系统用单一同轴电缆的一般要

求和试验

Radio-frequency cables. Part 3 : General requirements and tests for single-unit coaxial cables foruse in cabled distribution systems9P;A4

IEC 60096-4-1-1990射频电缆规范.第4部分:超屏蔽电缆的规范.第1节:一般要求

和试验方法

Radio-frequency cables; part 4: specification for superscreened cables; section 1: generalrequirements and test methods34P;A4

IEC 60097-1991 印制电路的网格体系Grid systems for printed circuits13P;A4

IEC 60098-1987 圆盘唱片和重放设备 Analogue audio disk records and reproducing equipment.

IEC 60099-1 AMD 1-1999电涌放电器.第1部分:交流系统用非线性电阻型间隙式电涌

放电器.修改件1

Surge arresters - Part 1: Non-linear resistor type gapped arresters for a.c. systems; Amendment1

IEC 60099-1 Edition 3.1-1999 电涌放电器.第1部分:交流系统用非线性电阻型间隙式电涌

放电器

Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems93P;A4

IEC 60099-1-1991 电涌放电器.第1部分:交流系统用非线性电阻型间隙式电涌

放电器

Surge arresters; part 1: non-linear resistor type gapped surge arresters for a.c. systems93P;A4

IEC 60099-4 AMD 2-2001 电涌放电器.第4部分:交流电系统用无间隙金属氧化物电涌

放电器

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems; Amendment2

IEC 60099-4 Edition 1.2-2001 避雷器.第4部分:交流电系统用物间隙金属氧化物避雷器 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

IEC 60099-4-1998 电涌放电器.第4部分:交流电系统用无间隙金属氧化物电涌

放电器

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems139P;A4

IEC 60099-5 AMD 1-1999 电涌放电器.第5部分:选择和应用推荐规程.修改件1Surge arresters - Part 5: Selection and application recommendations; Amendment 135P;A4

IEC 60099-5 Edition 1.1-2000 电涌放电器.第5部分:选择和应用推荐规程Surge arresters - Part 5: Selection and application recommendations111P;A4

IEC 60099-5-1996 电涌放电器.第5部分:选择和应用推荐规程Surge arresters - Part 5: Selection and application recommendations89P;A4

IEC 60099-6-2002避雷器.第6部分:额定电压等于或低于52kV的含有串联及并

联间隙结构的避雷器

Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures;Rated 52 kV and less46P;A4

IEC 60100 AMD 1-1969 电子管极间电容的测量方法.第1次修改 Methods for the measurement of direct interelectrode capacitances of electronic tubes and

IEC 60100-1962 电子管极间电容的测量方法Methods for the measurement of direct interelectrode capacitances of electronic tubes andvalves

IEC 60104-1987 架空线路用铝镁硅型铝合金导线Aluminium-magnesium-silicon alloy wire for overhead line conductors.5P;A4

IEC 60105-1958 工业纯铝母线材料的推荐标准Recommendation for commercial-purity aluminium busbar material5P;A4

（31） 351

IEC标准目录


开本页数

IEC 60107-1-1997电视广播传输接收机的测量方法.第1部分:一般要求.广播和

电视频率显示的测量

Methods of measurement on receivers for television broadcast transmissions - Part 1: Generalconsiderations - Measurements on displays at radio and video frequencies395P;A4

IEC 60107-2-1997电视广播传输接收机的测量方法.第2部分:声频通道.单音通

道用一般方法

Methods of measurement on receivers for television broadcast transmissions - Part 2: Audiochannels - General methods and methods for monophonic channels51P;A4

IEC 60107-3 AMD 1-1999电视广播接收机的推荐测量方法.第3部分:副载波系统多声

道电视接收机的电测量.补充件1

Recommended methods of measurement on receivers for television broadcast transmissions -Part 3: Electrical measurements on multichannel sound television receivers using subcarriersystems; Amendment 19P;A4

IEC 60107-3 Edition 1.1-1999电视播放传输的接收器测量的推荐方法.第3部分:用亚载系

统的多频道声音电视接收器的电气测量

Recommended methods of measurement on receivers for television broadcast transmissions -Part 3: Electrical measurements on multichannel sound television receivers using subcarriersystems

IEC 60107-3-1988电视广播接收机的推荐测量方法.第3部分:副载波系统多声

道电视接收机的电测量

Recommended methods of measurement on receivers for television broadcast transmissions;part 3: electrical measurements on multichannel sound television receivers using subcarriersystems

IEC 60107-4 AMD 1-1999电视广播接收机的推荐测量方法.第4部分:双载波调频装置

多声道电视接收机的电测量.补充件1

Recommended methods of measurement on receivers for television broadcast transmissions -Part 4: Electrical measurements on multichannel sound television receivers using the two-carrierFM-system; Amendment 17P;A4

IEC 60107-4 Edition 1.1-1999电视广播接收机的推荐测量方法.第4部分:使用双载波调频

系统多声道电视接收机的电气性能测量

Recommended methods of measurement on receivers for television broadcast transmissions -Part 4: Electrical measurements on multichannel sound television receivers using the two-carrierFM-system

IEC 60107-4-1988电视广播接收机的推荐测量方法.第4部分:双载波调频装置

多声道电视接收机的电测量

Recommended methods of measurement on receivers for television broadcast transmissions;part 4: electrical measurements on multichannel sound television receivers using the two-carrierFM-system

IEC 60107-5 AMD 1-1999电视广播接收机的推荐测量方法.第5部分:使用NICAM双声

道数字音频系统对多声道电视接收机的电气测量.补充件1

Recommended methods of measurement on receivers for television broadcast transmissions -Part 5: Electrical measurements on multichannel sound television receivers using the NICAMtwo-channel digital sound-system; Amendment 17P;A4

IEC 60107-5 Edition 1.1-1999电视广播接收机的推荐测量方法.第5部分:使用NICAM双声

道数字音频系统多声道电视接收机的电气性能测量

Recommended methods of measurements on receivers for television broadcast transmissions -Part 5: Electrical measurements on multichannel sound television receivers using the NICAMtwo-channel digital sound-system37P;A4

IEC 60107-5-1992电视广播接收机的推荐测量方法.第5部分:使用NICAM双声

道数字音频系统测量多声道电视接收机

Recommended methods of measurement on receivers for television broadcast transmissions;part 5: electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system32P;A4

（32） 351

IEC标准目录


开本页数

IEC 60107-6-1989电视广播接收机的推荐测量方法.第6部分:不同广播信号标

准条件下的测量

Recommended methods of measurement on receivers for television broadcast transmissions;part 6: measurement under conditions different from broadcast signal standards81P;A4

IEC 60107-7-1997 电视接收机的测量方法.第7部分:HDTV显示器Methods of measurement on receivers for television - Part 7: HDTV displays129P;A4

IEC 60107-8-1997电视广播传输接收机的测量方法.第8部分:D2-MAC信息包

设备上的测量

Recommended methods of measurement on receivers for television broadcast transmissions -Part 8: Measurements on D2-MAC/packet equipment97P;A4

IEC 60110-1-1998 导热绝缘电力电容器.第1部分:一般Power capacitors for induction heating installations - Part 1: General59P;A4

IEC 60112-2003 固体绝缘材料的比较起痕指数和耐泄痕指数的测定方法

Method for the determination of the proof and the comparative tracking indices of solid insulatingmaterials48P;A4

IEC 60114-1959 铝镁硅型热处理铝合金母线材料的推荐标准

Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type5P;A4

IEC 60115-1 AMD 1-2001 电子设备用固定电阻器.第1部分:总规范.修改件1Fixed resistors for use in electronic equipment - Part 1: Generic specification; Amendment 14P;A4

IEC 60115-1 Edition 3.1-2001 电子设备用固定电阻器.第1部分:总规范Fixed resistors for use in electronic equipment - Part 1: Generic specification59P;A4

IEC 60115-2-1-1982电子设备用固定电阻器.第2部分:空白详细规范.第1节:低功

率非线绕固定电阻器.E级评定

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors. Blankdetail specification: Fixed low-power non-wirewound resistors. Assessment level E19P;A4

IEC 60115-2-1982电子设备用固定电阻器.第2部分:分规范:低功率非线绕固定

电阻器

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors29P;A4

IEC 60115-2-2-1992电子设备用固定电阻器.第2部分:空白详细规范.第2节:低功

率非线绕固定电阻器.F级评定

Fixed resistors for use in electronic equipment; part 2: blank detail specification: fixed low-powernon-wirewound resistors; assessment level F25P;A4

IEC 60115-4 AMD 1-1993 第1次修改Fixed resistors for use in electronic equipment; part 4: sectional specification: fixed powerresistors; amendment 13P;A4

IEC 60115-4-1 AMD 1-1993 第1次修改Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed powerresistors; assessment level E; amendment 13P;A4

IEC 60115-4-101-1995电子设备用固定电阻器.第4部分:详细规范.具有可焊轴向导

线的固定功率线绕电阻器.5%稳定度.评定级E

Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed powerwirewound resistors with solderable axial wire leads - Stability class 5% - Assessment level E23P;A4

（33） 351

IEC标准目录


开本页数

IEC 60115-4-102-1995电子设备用固定电阻器.第4部分:详细规范.具有可焊轴向导

线的固定功率线绕电阻器.1%稳定度.评定级E

Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed powerwirewound resistors with solderable axial wire leads - Stability class 1% - Assessment level E25P;A4

IEC 60115-4-1-1983电子设备用固定电阻器.第4部分:空白详细规范.第1节:功率

型固定电阻器.E级评定

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 4 : Sectional specification: Fixed power resistors. Blank detail specification:Fixed power resistors. Assessment level E21P;A4

IEC 60115-4-1982 电子设备用固定电阻器.第4部分:分规范:功率型固定电阻器Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 4 : Sectional specification: Fixed power resistors31P;A4

IEC 60115-4-2-1992电子设备用固定电阻器.第4部分:空白详细规范:功率型固定

电阻器.第2节:F级评定

Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed powerresistors; assessment level F23P;A4

IEC 60115-4-3-1993电子设备用固定电阻器.第4部分:空白详细规范:散热器型固

定电力电阻器.H级评定

Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed powerresistors, heat-sink types; assessment level H27P;A4

IEC 60115-5-101-1995电子设备用固定电阻器.第5部分:空白详细规范.具有可焊轴

向导线的固定精密线绕电阻器.0.1%稳定度.E级评定

Fixed resistors for use in electronic equipment - Part 5: Detail specification: Fixed precisionwirewound resistors with solderable axial wire leads - Stability class 0,1% - Assessment level E23P;A4

IEC 60115-5-1-1983电子设备用固定电阻器.第5部分:空白详细规范.第1节:精密

固定电阻器.E级评定

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 5 : Sectional specification: Fixed precision resistors. Blank detail specification:Fixed precision resistors. Assessment level E21P;A4

IEC 60115-5-1982 电子设备用固定电阻器.第5部分:分规范:精密固定电阻器Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 5 : Sectional specification: Fixed precision resistors31P;A4

IEC 60115-5-2-1992电子设备用固定电阻器.第5部分:空白详细规范:精密固定电

阻器.第2节:F级评定

Fixed resistors for use in electronic equipment; part 5: blank detail specification: fixed precisionresistors; assessment level F25P;A4

IEC 60115-6 AMD 1-1987电子设备用固定电阻器.第6部分:分规范:各电阻器可单独测

量的固定电阻器网络.第1次修改

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 6 : Sectional specification: Fixed resistors networks with individually

IEC 60115-6-101-1992电子设备用固定电阻器.第6部分:空白详细规范:所有电阻器

都是等阻值等功耗可单独测量的固定厚膜电阻器网络.第101节:1级(双行排列网络)

Fixed resistors for use in electronic equipment; part 6: detail specification: fixed thick film resistornetworks with individually measurable resistors, all of equal value and equal dissipation, class 1(dual-in-line network)23P;A4

IEC 60115-6-102-1992电子设备用固定电阻器.第6部分:空白详细规范:所有电阻器

都是等阻值等功耗可单独测量的固定薄膜电阻器网络.102节:1级(单行排列网络)

Fixed resistors for use in electronic equipment; part 6: detail specification: fixed thick film resistornetworks with individually measurable resistors, all of equal value and equal dissipation, class 1(single-in-line network)23P;A4

（34） 351

IEC标准目录


开本页数

IEC 60115-6-1-1983电子设备用固定电阻器.第6部分:空白详细规范.第1节:所有

电阻器都是等阻值和等功耗可单独测量的固定电阻器网络.E级评定

Fixed resistors for use in electronic equipment. Part 6: Blank detail specification: Fixed resistornetworks with individually measurable resistors, all of equal value and equal dissipation.Assessment Level E19P;A4

IEC 60115-6-1983电子设备用固定电阻器.第6部分:分规范:各电阻器可单独测

量的固定电阻器网络

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 6 : Sectional specification: Fixed resistors networks with individuallymeasurable resistors

IEC 60115-6-2-1983电子设备用固定电阻器.第6部分:空白详细规范.第2节:可单

独测量的不同电阻值或不同额定功耗的固定电阻器网络.E级评定

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 6 : Sectional specification: Fixed resistors networks with individuallymeasurable resistors. Blank detail specification: Fixed resistor networks with inividuallymeasurable resistors, with different values or different rated dissipators - Assessment level E

IEC 60115-7-1-1984电子设备用固定电阻器.第7部分:分规范.第1节:非全部电阻

器均可单独测量的固定电阻器网络.E级评定

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 7 : Sectional specification : Fixed resistor networks in which not all resistors areindivudually measurable. Assessment level E29P;A4

IEC 60115-7-1984电子设备用固定电阻器.第7部分:分规范:非全部电阻器均可

单独测量的固定电阻器网络

Sectional specification : Fixed resistor networks in which not all resistors are individuallymeasurable. Part 7 : Sectional specification : Fixed resistor networks in which not all resistors areindividually measurable45P;A4

IEC 60115-8 AMD 1-2000电子设备用固定电阻器.第8部分:分规范:固定式片状电阻

器.修改件1

Fixed resistors for use in electronic equipment - Part 8: Sectional specification: Fixed chipresistors; Amendment 12P;A4

IEC 60115-8-1-1989电子设备用固定电阻器.第8部分:空白详细规范.第1节:固定

式片状电阻器.E级评定

Fixed resistors for use in electronic equipment; part 8: blank detail specification: fixed chipresistors, assessment level E21P;A4

IEC 60115-8-1989 电子设备用固定电阻器.第8部分:分规范:固定式片状电阻器Fixed resistors for use in electronic equipment; part 8: sectional specification: fixed chip resistors35P;A4

IEC 60118-0 AMD 1-1994 第1次修改Hearing aids; part 0: measurement of electroacoustical characteristics; amendment 13P;A4

IEC 60118-0-1983 助听器.第0部分:电声特性的测量Measurement of electroacoustical characteristics50P;A4

IEC 60118-1 Edition 3.1-1999 助听器.第1部分:有感应接收线圈输入的助听器 Hearing aids - Part 1: Hearing aids with induction pick-up coil input

IEC 60118-11-1983 助听器.第11部分:助听器及有关设备上的符号和其它标记Hearing aids. Part 11 : Symbols and other markings on hearing aids and related equipment25P;A4

IEC 60118-1-1999 助听器.第1部分:具有感应拾音线圈输入的助听器 Hearing aids - Part 1: Hearing aids with induction pick-up coil input

IEC 60118-12-1996 助听器.第12部分:电子连接器系统的尺寸Hearing aids - Part 12: Dimensions of electrical connector systems21P;A4

IEC 60118-13-1997 助听器.第13部分:电磁兼容性(EMC)Hearing aids - Part 13: Electromagnetic compatibility (EMC)25P;A4

（35） 351

IEC标准目录


开本页数

IEC 60118-14-1998 助听器.第14部分:数字接口装置的规范Hearing aids - Part 14: Specification of a digital interface device21P;A4

IEC 60118-2 AMD 1-1993 助听器.第2部分:具有自动增益控制电路的助听器.第1次修

改

Hearing aids; part 2: hearing aids with automatic gain control circuits; amendment 113P;A4

IEC 60118-2 AMD 2-1997 助听器.第2部分:自动增益控制电路的助听器.修改件2Hearing aids - Part 2: Hearing aids with automatic gain control circuits; Amendment 219P;A4

IEC 60118-2-1983 助听器.第2部分:自动增益控制电路的助听器Hearing aids. Part 2 : Hearing aids with automatic gain control circuits17P;A4

IEC 60118-3-1983 助听器.第3部分:不完全戴在听者身上的助听设备Hearing aids. Part 3 : Hearing aid equipment not entirely worn on the listener13P;A4

IEC 60118-4 AMD 1-1998助听器.第4部分:助听器的声频感应回路中磁场强度.补充件

1

Hearing aids - Part 4: Magnetic field strength in audio-frequency induction loops for hearing aidpurposes; Amendment 13P;A4

IEC 60118-4-1981 助听器.第4部分:助听器的声频感应回路中磁场强度Hearing aids. Part 4 : Magnetic field strength in audio-frequency induction loops for hearing aidpurposes9P;A4

IEC 60118-5-1983 助听器.第5部分:塞入式耳机塞头Hearing aids. Part 5 : Nipples for insert earphones7P;A4

IEC 60118-6-1999 助听器.第6部分:助听器电输入线路的特性Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids9P;A4

IEC 60118-7 AMD 1-1994 第1次修改Hearing aids; part 7: measurement of the performance characteristics of hearing aids for qualityinspection for delivery purposes; amendment 13P;A4

IEC 60118-7-1983助听器.第7部分:为交货而进行质量检验的助听器工作特性

的测量

Hearing aids. Part 7 : Measurement of performance characteristics of hearing aids for qualityinspection for delivery purposes27P;A4

IEC 60118-9-1985 助听器.第9部分:骨振子输出助听器特性测量方法Hearing aids. Part 9 : Methods of measurement of characteristics of hearing aids with bonevibrator output23P;A4

IEC 60119-1960 多晶半导体整流堆和整流设备推荐标准Recommendation for polycrystalline semiconductor rectifier stacks and equipment95P;A4

IEC 60120-1984 绝缘子串元件的球与窝连接尺寸Dimensions of ball and socket couplings of string insulator units34P;A4

IEC 60121-1960 工业用退火铝导线的推荐标准Recommendation for commercial annealed aluminium electrical conductor wires5P;A4

IEC 60122-1-2002 经过质量评定的石英晶体元件.第1部分:总规范Quartz crystal units of assessed quality - Part 1: Generic specification79P;A4

IEC 60122-2-1 AMD 1-1993频率控制和选择用的石英晶体元件.第2部分第1节:频率控

制和选择用石英晶体元件的使用指南.第1次修改

Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystalunits for frequency control and selection; section 1: quartz crystal units for microprocessor clocksupply

（36） 351

IEC标准目录


开本页数

IEC 60122-2-1-1991频率控制和选择用的石英谐振器.第2部分:频率控制和选择

元件用石英晶体元件的使用指南

Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystalunits for frequency control and selection; section 1: quartz crystal units for microprocessor clocksupply

IEC 60122-2-1983频率控制和选择用石英谐振器.第2部分:频率控制和选择用

石英谐振器的使用导则

Quartz crystal units for frequency control and selection. Part 2 : Guide to the use of quartz crystalunits for frequency control and selection88P;A4

IEC 60122-3-2001 质量评定过的石英谐振器.第3部分:标准外形图和导线接头Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections63P;A4

IEC 60122-3A-1979 第1次补充Quartz crystal units for frequency control and selection. Part 3 : Standard outlines and pinconnections.

IEC 60122-3B-1980 第2次补充Quartz crystal units for frequency control and selection. Part 3 : Standard outlines and pinconnections.

IEC 60122-3C-1981 第3次补充Quartz crystal units for frequency control and selection. Part 3 : Standard outlines and pinconnections.

IEC 60122-3D-1989频率控制和选择用石英谐振器.第3部分:标准外形和插脚连

接.第4次补充

Quartz crystal units for frequency control and selection; part 3: standard outlines and leadconnections; fourth supplement to IEC 60122-3:197710P;A4

IEC 60126-1973 测试戴耳塞机助听器用的IEC基准耦合腔IEC reference coupler for the measurement of hearing aids using earphones coupled to the earby means of ear inserts17P;A4

IEC 60127-1 AMD 1-1999微型熔断器的管式熔断体.第1部分:微型熔断器的定义和微

型熔断体的通用要求.补充件1

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniaturefuse-links; Amendment 117P;A4

IEC 60127-1 AMD 2-2002小型熔断器.第1部分:小型熔断器的定义和小型熔断体的一

般要求.修改件2

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniaturefuse-links; Amendment 27P;A4

IEC 60127-1 Edition 1.1-1999微型熔断器.第1部分:微型熔断器的定义和微型熔断体的通

用要求

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniaturefuse-links53P;A4

IEC 60127-1 Edition 1.2-2003微型熔断器.第1部分:微型熔断器的定义和微型熔断体的通

用要求

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniaturefuse-links62P;A4

IEC 60127-10-2001 小型熔断器.第10部分:小型熔断器的用户指南Miniature fuses - Part 10: User guide for miniature fuses31P;A4

IEC 60127-1-1988微型熔断器.第1部分:微型熔断器的定义和微型熔断链的一

般要求

Miniature fuses; part 1: definitions for miniature fuses and general requirements for miniaturefuse-links44P;A4

IEC 60127-2-2003 小型熔断器.第2部分:管状熔断体Miniature fuses - Part 2: Cartridge fuse-links64P;A4

（37） 351

IEC标准目录


开本页数

IEC 60127-3 AMD 1-1991 微型熔断器.第3部分:超小型熔断体.修改件1Miniature fuses; part 3: sub-miniature fuse-links; amendment 122P;A4

IEC 60127-3 AMD 2-2002 小型熔断器.第3部分:超小型熔断体.修改件2Miniature fuses - Part 3: Sub-miniature fuse-links; Amendment 211P;A4

IEC 60127-3-1988 微型熔断器.第3部分:超微型熔断体Miniature fuses; part 3: sub-miniature fuse-links38P;A4

IEC 60127-4 AMD 1-2002 小型熔断器.第4部分:通用定型保险丝(UMF).修改件1Miniature fuses - Part 4: Universal Modular Fuse-links (UMF); Amendment 121P;A4

IEC 60127-4-1996 小型熔断器.第4部分:通用保险丝(UMF)Miniature fuses - Part 4: Universal Modular Fuse-links (UMF)56P;A4

IEC 60127-5-1988 微型熔断器的管式熔断体.第5部分:微型熔断体的质量评定

导则

Miniature fuses; part 5: guidelines for quality assessment of miniature fuse-links13P;A4

IEC 60127-6 AMD 1-1996微型熔断器的管式熔断体.第6部分:微型熔断体用保险丝盒.补充件1

Miniature fuses - Part 6: Fuse-holders for miniature fuse-links; Amendment 115P;A4

IEC 60127-6 AMD 2-2002 小型熔断器.第6部分:小型管状熔断体的熔断器支持件.修改

件2

Miniature fuses - Part 6: Fuse-holders for miniature cartridge fuse-links; Amendment 229P;A4

IEC 60127-6-1994 微型熔断器的管式熔断体.第6部分:微型熔断体用保险丝盒Miniature fuses - Part 6: Fuse-holders for miniature cartridges fuse-links89P;A4

IEC 60130-10-1971频率低于3MHz的连接器.第10部分:便携式娱乐设备与外接

低压电源连接用的连接器

Connectors for frequencies below 3 MHz. Part 10 : Connectors for coupling an external low-voltage power supply to portable entertainment equipment21P;A4

IEC 60130-11-1971频率低于3MHz的连接器.第11部分:与印制电板装连接器或

板边具有接触点的印制线路板相配用的带封闭端的触点间距为2.55mm(0.1in)的边缘插座连接器

Connectors for frequencies below 3 MHz. Part 11 : Edge socket connectors with closed ends andhaving a contactspacing of 2.55 mm (0.1 in) mating either with board mounted connectors orprinted wiring boards with edge board contacts27P;A4

IEC 60130-11A-1975 第1次补充

Connectors for frequencies below 3 MHz. Part 11 : Edge socket connectors with closed ends andhaving a contactspacing of 2.55 mm (0.1 in) mating either with board mounted connectors orprinted wiring boards with edge board contacts. First supplement: Multi-row board mountedprinted circuit connectors having contact and termination spacing on a 2.54 mm (0.1 in) squaregrid 21P;A4

IEC 60130-12-1976 频率低于3MHz的连接器.第12部分:连接片和试验用连接器Connectors for frequencies below 3 MHz. Part 12 : Link and test connectors40P;A4

IEC 60130-16-1976频率低于3MHz的连接器.第16部分:具有间距为

2.54mm(0.1in)的双排交错触点和接触端子的印制电路板装

连接器

Connectors for frequencies below 3 MHz. Part 16 : Printed circuit board mounted connectors withtwo rows of staggered contacts and terminations with spacing of 2.54 mm (0.1 in)31P;A4

IEC 60130-17-1998频率低于3MHz的连接器.第17部分:使用可充电电池的允许

多向连接的互连装置的详细规范

Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnectiondevices which permit multi-directional mating, for use with rechargeable batteries67P;A4

IEC 60130-2 AMD 1-1969频率低于3MHz的连接器.第2部分:无线电接收机及相关音

响设备用连接器.第1次修改

Connectors for frequencies below 3 MHz. Part 2 : Connectors for radio receivers and associatedsound equipment

（38） 351

IEC标准目录


开本页数

IEC 60130-2-1965频率低于3MHz的连接器.第2部分:无线电接收机及相关音

响设备用连接器

Connectors for frequencies below 3 MHz. Part 2 : Connectors for radio receivers and associatedsound equipment35P;A4

IEC 60130-3-1965 频率低于3MHz的连接器.第3部分:电池组连接器Connectors for frequencies below 3 MHz. Part 3 : Battery connectors25P;A4

IEC 60130-4-1966 频率低于3MHz的连接器.第4部分:螺纹连接的多极圆形连

接器

Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threadedcoupling

IEC 60130-4A-1970 第1次补充Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threadedcoupling.

IEC 60130-5-1966 频率低于3MHz的连接器.第5部分:扁脚多极矩形连接器Connectors for frequencies below 3 MHz. Part 5 : Rectangular multipole connectors with bladecontacts31P;A4

IEC 60130-6-1965频率低于3MHz的连接器.第6部分:扁脚小型多极矩形连接

器

Connectors for frequencies below 3 MHz. Part 6 : Rectangular miniature multipole connectorswith blade contacts31P;A4

IEC 60130-7-1971频率低于3MHz的连接器.第7部分:卡口连接或推拉连接的

多极圆形连接器

Connectors for frequencies below 3 MHz. Part 7 : Circular multipole connectors with bayonet orpush-pull coupling53P;A4

IEC 60130-8-1976频率低于3MHz的连接器.第8部分:无线电接收机中音频电

路用同轴连接器

Connectors for frequencies below 3 MHz. Part 8 : Concentric connectors for audio circuits inradio receivers11P;A4

IEC 60130-9-2000低于3MHz的射频连接器.第9部分:无线电及相关音响设备

用的圆形连接器

Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associatedsound equipment111P;A4

IEC 60133-2000 磁性氧化物制罐形磁芯及相关件的尺寸Dimensions of pot-cores made of magnetic oxides and associated parts13P;A4

IEC 60134-1961 电子管和类似半导体器件的额定值体系System of limiting values of electronic tubes and valves and the adequate semiconductor devices9P;A4

IEC 60135-1961 电子管电极的编号和部件的命名方法Numbering of electrodes and designation of units in electronic tubes and valves9P;A4

IEC 60136 AMD 1-1995 电机的电刷和刷握尺寸.第1次修改Dimensions of brushes and brush-holders for electrical machinery; Amendment 15P;A4

IEC 60136-1986 电机的电刷和刷握尺寸Dimensions of brushes and brush-holders for electrical machinery62P;A4

IEC 60137-1995 交流电压1000V以上绝缘套管Insulated bushings for alternating voltages above 1000 V91P;A4

IEC 60139-2000 阴极射线管的外形图的准备及其部件、连接和量规Preparation of outline drawings for cathode-ray tubes, their components, connections andgauges

（39） 351

IEC标准目录


开本页数

IEC 60141-1 AMD 1-1995充油电缆和压气电缆及其附件的试验.第1部分:交流电压

400KV及以下的纸绝缘金属护套充油电缆及附件.第1次修

改

Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including400 kV; Amendment 13P;A4


400KV及其以下的纸绝缘金属护套充油电缆及附件.第1次修改

Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including400 kV; Amendment 211P;A4

IEC 60141-1-1993充油电缆和压气电缆及其附件的试验.第1部分:交流电压

400KV及以下的纸绝缘金属护套充油电缆及附件

Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including400 kV


275KV及以下的内部压缩气体电缆及附件.第1次修改

Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressurecables and accessories for alternating voltages up to 275 kV

IEC 60141-2-1963充油电缆和压气电缆及其附件的试验.第2部分:交流电压

275KV及以下的内部压缩气体电缆及附件

Test on oil-filled and gas-pressure cables and their accessories. Part 2 : Internal gas-pressurecables and accessories for alternating voltages up to 275 kV25P;A4

IEC 60141-3 AMD 1-1967充油和压气电缆及其附件的试验.第3部分:交流电压275KV及以下外部压缩气体电缆及附件.第1次修改

Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure(gas compression) cables and accessories alternating voltage up to 275 kV

IEC 60141-3-1963充油和压气电缆及其附件的试验.第3部分:交流电压275KV及以下外部压缩气体电缆及附件

Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure(gas compression) cables and accessories alternating voltage up to 275 kV30P;A4

IEC 60141-4 AMD 1-1990充油和压气电缆及其附件的试验.第4部分:交流电压400KV及以下油浸纸绝缘高压力充油管式电缆及附件.第1次修改

Test on oil-filled and gas-pressure cables and their accessories; part 4: oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up toand including 400 kV; amendment 1 to IEC 60141-4:19805P;A4

IEC 60141-4-1980充油和压气电缆及其附件的试验.第4部分:交流电压400KV及以下油浸纸绝缘高压力充油管式电缆及附件

Test on oil-filled and gas-pressure cables and their accessories. Part 4 : Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up toand including 400 kV35P;A4

IEC 60143-1-1992电力系统用串联电容器.第1部分:概述.性能、试验及定额.安全要求.安装指南

Series capacitors for power systems; part 1: general; performance, testing and rating; safetyrequirements; guide for installation91P;A4

IEC 60143-1992 电力系统用串联电容器Series capacitors for power systems91P;A4

IEC 60143-2-1994 电力系统用串联电容器.第2部分:串联电容组用保护设备Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks101P;A4

IEC 60143-3-1998 电力系统用串联电容器.第3部分:内熔丝Series capacitors for power systems - Part 3: Internal fuses23P;A4

IEC 60145-1963 乏时计(无功能量计)Var-hour (reactive energy) meters39P;A4

（40） 351

IEC标准目录


开本页数

IEC 60146-1-1 AMD 1-1996半导体变流器.电网换相变流器和一般要求.第1部分第1节:基本要求规范.补充件1

Semiconductor convertors - General requirements and line commutated convertors - Part 1-1:Specifications of basic requirements; Amendment 13P;A4

IEC 60146-1-1-1991半导体变流器.电网换相变流器和一般要求.第1部分第1节:基本要求规范

Semiconductor convertors; general requirements and line commutated convertors; part 1-1:specifications of basic requirements135P;A4

IEC 60146-1-2-1991半导体变流器.第1部分:电网换相变流器和一般要求.第2节:应用导则

Semiconductor convertors; general requirements and line commutated convertors; part 1-2:application guide187P;A4

IEC 60146-1-3-1991半导体变流器.第1部分:电网换相变流器和一般要求.第3节:变压器和电抗器

Semiconductor convertors; general requirements and line commutated convertors; part 1-3:transformers and reactors25P;A4

IEC 60146-2-1999半导体变流器.第2部分:包括直流变流器的自换向半导体变

流器

Semiconductor converters - Part 2: Self-commutated semiconductor converters including directd.c. converters91P;A4

IEC 60149-1 AMD 1-1970 电子插塞器件用插座和附件.第1部分:一般要求和试验方法.第1次修改

Sockets and accessories for electronic plug-in devices. Part 1 : General requirements andmethods of test

IEC 60149-1 AMD 2-1972 电子插塞器件用插座和附件.第1部分:一般要求和试验方法.第2次修改

Sockets and accessories for electronic plug-in devices. Part 1 : General requirements andmethods of test

IEC 60151-0-1966 电子管电性能的测量.第0部分:有关电子管测量方法的注意

事顶

Precautions relating to methods of measurement of electronic tubes and valves9P;A4

IEC 60151-10-1966电子管电性能的测量.第10部分:音频输出功率和失真的测

量方法

Measurements of the electrical properties of electronic tubes. Part 10 : Methods of measurementof audio-frequency output power and distortion11P;A4

IEC 60151-11-1966 电子管电性能的测量.第11部分:射频输出功率的测量方法Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurementof radiofrequency output power13P;A4

IEC 60151-1-1963 电子管电性能的测量.第1部分:电极电流的测量Measurements of the electrical properties of electronic tubes. Part 1 : Measurement of electrodecurrent5P;A4

IEC 60151-12-1966电子管电性能的测量.第12部分:电极电阻、跨导、放大系

数、变频电阻和变频跨导的测量方法

Measurements of the electrical properties of electronic tubes. Part 12 : Methods of measuringelectrode resistance, transconductance,amplification factor, conversion resistance andconversion transconductance28P;A4

IEC 60151-13-1966电子管电性能的测量.第13部分:高真空电子管热阴极发射

电流的测量方法

Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurementof emission current from hot cathodes for high-vacuum electronic tubes and valves11P;A4

IEC 60151-14-1975电子管电性能的测量.第14部分:雷达和示波器阴极射线管

的测量方法

Measurements of the electrical properties of electronic tubes. Part 14 : Methods of measurementof radar and oscilloscope cathode-ray tubes31P;A4

（41） 351

IEC标准目录


开本页数

IEC 60151-15-1967电子管电性能的测量.第15部分:寄生和不需要电极电流的

测量方法

Measurements of the electrical properties of electronic tubes. Part 15 : Methods of measurementof spurious and unwanted electrode currents34P;A4

IEC 60151-16-1968 电子管电性能的测量.第16部分:电视显象管的测量方法Measurements of the electrical properties of electronic tubes. Part 16 : Methods of measurementfor television picture tubes19P;A4

IEC 60151-17-1969 电子管电性能的测量.第17部分:充气管的测量方法Measurements of the electrical properties of electronic tubes. Part 17 : Methods of measurementof gas filled tubes and valves51P;A4

IEC 60151-18-1968电子管电性能的测量.第18部分:机械或声激发的噪声的测

量方法

Measurements of the electrical properties of electronic tubes. Part 18 : Methods of measurementof noises due to mechanical or acoustic excitations20P;A4

IEC 60151-19-1969 电子管电性能的测量.第19部分:电晕稳压管的测量方法Measurements of the electrical properties of electronic tubes. Part 19 : Methods of measurementon corona stabilizers17P;A4

IEC 60151-20-1969电子管电性能的测量.第20部分:闸流管脉冲调制器的测量

方法

Measurements of the electrical properties of electronic tubes. Part 20 : Methods of measurementof thyratron pulse modulators32P;A4

IEC 60151-21-1969电子管电性能的测量.第21部分:电子管交叉调制的测量方

法

Measurements of the electrical properties of electronic tubes. Part 21 : Methods of measurementof cross-modulation in electronic tubes and valves14P;A4

IEC 60151-2-1963 电子管电性能的测量.第2部分:热丝或灯丝电流的测量Measurements of the electrical properties of electronic tubes. Part 2 : Measurement of heater orfilament current5P;A4

IEC 60151-22-1970电子管电性能的测量.第22部分:冷阴极计数管和指示管的

测量方法

Measurements of the electrical properties of electronic tubes. Part 22 : Methods of measurementfor cold cathode counting and indicator tubes28P;A4

IEC 60151-23-1970电子管电性能的测量.第23部分:真空脉冲调制管的测量方

法

Measurements of the electrical properties of electronic tubes. Part 23 : Methods of measurementof vacuum pulse modulator tubes and valves23P;A4

IEC 60151-24-1971电子管电性能的测量.第24部分:阴极射线电荷存储管的测

量方法

Measurements of the electrical properties of electronic tubes. Part 24 : Methods of measurementof cathode-ray charge-storage tubes60P;A4

IEC 60151-25-1971电子管电性能的测量.第25部分:盖格-弥勒计数管的测量方

法

Measurements of the electrical properties of electronic tubes. Part 25 : Methods of measurementof Geiger-M乴ler counter tubs34P;A4

IEC 60151-26-1971 电子管电性能的测量.第26部分:摄象管的测量方法Measurements of the electrical properties of electronic tubes. Part 26 : Methods of measurementfor camera tubes43P;A4

（42） 351

IEC标准目录


开本页数

IEC 60151-27-1974电子管电性能的测量.第27部分:发射管互调分量的测量方

法

Measurements of the electrical properties of electronic tubes. Part 27 : Methods of measurementfor intermodulation products in transmitting tubes15P;A4

IEC 60151-28-1978电子管电性能的测量.第28部分:彩色电视显象管的测量方

法

Measurements of the electrical properties of electronic tubes. Part 28 : Methods of measurementof colour television picture tubes21P;A4

IEC 60151-3-1963 电子管电性能的测量.第3部分:等效输入和输出导纳的测量Measurements of the electrical properties of electronic tubes. Part 3 : Measurement of equivalentinput and output admittances9P;A4

IEC 60151-4-1963 电子管电性能的测量.第4部分:噪声系数的测量方法Measurements of the electrical properties of electronic tubes. Part 4 : Methods of measuringnoise factor13P;A4

IEC 60151-5-1964 电子管电性能的测量.第5部分:嘘声和哼声的测量方法Measurements of the electrical properties of electronic tubes. Part 5 : Methods of measuring hissand hum13P;A4

IEC 60151-6-1965电子管电性能的测量.第6部分:对电子管施加机械震动(脉动)激励的方法

Measurements of the electrical properties of electronic tubes. Part 6 : Methods of application ofmechanical shock (impulse) excitation to electronic tubes and valves15P;A4

IEC 60151-7-1964 电子管电性能的测量.第7部分:等效噪声电阻的测量Measurements of the electrical properties of electronic tubes. Part 7 : Measurement of equivalentnoise resistance13P;A4

IEC 60151-8-1966电子管电性能的测量.第8部分:阴极加热时间和热线加温时

间的测量

Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathodeheating time and heater warm-up time12P;A4

IEC 60151-9-1966 电子管电性能的测量.第9部分:阴极中间层阻抗的测量方法Measurements of the electrical properties of electronic tubes. Part 9 : Methods of measuring thecathode-interface impedance39P;A4

IEC 60152-1963 三相电力系统各相导线的钟点序数识别标志Identification by hour numbers of the phase conductors of 3-phase electric systems11P;A4

IEC 60153-1-1964 空腔金属波导管.第1部分:一般要求和测量方法Hollow metallic waveguides. Part 1 : General requirements and measuring methods25P;A4

IEC 60153-2-1974 空腔金属波导管.第2部分:普通矩形波导的有关规范Hollow metallic waveguides. Part 2 : Relevant specifications for ordinary rectangular waveguides22P;A4

IEC 60153-3-1964 空腔金属波导管.第3部分:扁矩形波导的有关规范Hollow metallic waveguides. Part 3 : Relevant specifications for flat rectangular waveguides12P;A4

IEC 60153-4-1973 空腔金属波导管.第4部分:圆波导的有关规范Hollow metallic waveguides. Part 4 : Relevant specifications for circular waveguides20P;A4

IEC 60153-6 AMD 1-1977 空腔金属波导管.第6部分:中扁矩形波导的有关规范.第1次 Hollow metallic waveguides. Part 6 : Relevant specifications for medium flat rectangular

IEC 60153-6-1967 空腔金属波导管.第6部分:中扁矩形波导的有关规范Hollow metallic waveguides. Part 6 : Relevant specifications for medium flat rectangularwaveguides

（43） 351

IEC标准目录


开本页数

IEC 60153-7-1972 空腔金属波导管.第7部分:方波导的有关规范Hollow metallic waveguides. Part 7 : Relevant specifications for square waveguides20P;A4

IEC 60154-1 AMD 1-1993 第1次修改Flanges for waveguides; part 1; general requirements; amendment 120P;A4

IEC 60154-1-1982 波导法兰盘.第1部分:一般要求Flanges for waveguides. Part 1 : General requirements13P;A4

IEC 60154-2 AMD 1-1997波导法兰盘.第2部分:普通矩形波导法兰盘的有关规范.修订

件1

Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangularwaveguides; Amendment 129P;A4

IEC 60154-2-1980 波导法兰盘.第2部分:普通矩形波导法兰盘的有关规范Flanges for waveguides. Part 2 : Relevant specifications for flanges for ordinary rectangularwaveguides46P;A4

IEC 60154-3-1982 波导法兰盘.第3部分:扁矩形波导法兰盘的有关规范Flanges for waveguides. Part 3 : Relevant specifications for flanges for flat rectangularwaveguides

IEC 60154-4-1969 波导法兰盘.第4部分:圆波导法兰盘的有关规范Flanges for waveguides. Part 4 : Relevant specifications for flanges for circular waveguides24P;A4

IEC 60154-6-1983 波导法兰盘.第6部分:中扁矩形波导法兰盘的有关规范Flanges for waveguides. Part 6 : Relevant specifications for flanges for medium flat rectangularwaveguides23P;A4

IEC 60154-7-1974 波导法兰盘.第7部分:方波导法兰盘的有关规范Flanges for waveguides. Part 7 : Relevant specifications for flanges for square waveguides15P;A4

IEC 60155 AMD 1-1995 荧光灯启动器.补充件1Glow-starters for fluorescent lamps; Amendment 17P;A4

IEC 60155-1993 管形荧光灯启动器Glow-starters for fluorescent lamps45P;A4

IEC 60156-1995 绝缘液体.电源频率击穿电压的测定Insulating liquids - Determination of the breakdown voltage at power frequency - Test method21P;A4

IEC 60167-1964 测定固体绝缘材料绝缘电阻的试验方法Methods of test for the determination of the insulation resistance of solid insulating materials21P;A4

IEC 60168 AMD 1-1997标称电压超过1000V的系统的户内外陶瓷或玻璃支柱绝缘

子试验

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominalvoltages greater than 1000 V; Amendment 115P;A4

IEC 60168 AMD 2-2000额定电压大于1000V的陶瓷材料或玻璃材料系统室内和室

外绝缘子试验.修改件2

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominalvoltages greater than 1000 V; Amendment 23P;A4

IEC 60168 Edition 4.2-2001标称电压大于1000V的系统用陶瓷材料或玻璃的户内和户

外柱式绝缘子试验

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominalvoltages greater than 1000 V91P;A4

（44） 351

IEC标准目录


开本页数

IEC 60168-1994公称电压高于1000V系统用户内外瓷或玻璃支柱绝缘子的

试验

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominalvoltages greater than 1000 V91P;A4

IEC 60169-1 AMD 1-1996 射频连接器.第1部分:一般要求和测量方法.补充件1Radio-frequency connectors - Part 1: General requirements and measuring methods;Amendment 1

IEC 60169-10 AMD 1-1986射频连接器.第10部分:外导体内径为3mm(0.12in)、直接固

定连接、特性阻抗为50Ω的射频同轴电缆连接器(SMB型).

Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outerconductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (TypeS )

IEC 60169-10 AMD 2-1996射频连接器.第10部分:外导体内径为3mm(0.12in)、直接固

定连接、特性阻抗为50Ω的射频同轴电缆连接器(SMB型).补充件2

Radio frequency connectors - Part 10: RF coaxial connectors with inner diameter of outerconductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (type SMB);Amendment 2

IEC 60169-10-1983射频连接器.第10部分:外导体内径为3mm(0.12in)、直接固

定连接、特性阻抗为50Ω的射频同轴电缆连接器(SMB型)

Radio-frequency connectors. Part 10 : R.F. coaxial connectors with inner diameter of outerconductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 Ohms (TypeSBM)

IEC 60169-11-1977射频连接器.第11部分:外导体内径为9.5mm(0.374in)、螺

纹连接、特性阻抗为50Ω的射频同轴连接器(4.1/9.5型)

Radio-frequency connectors. Part 11 : R.F. coaxial connectors with inner diameter of outerconductor 9.5 mm (0.374 in) with screw coupling - Characteristic impedance 50 ohms (Type4.1/9.5)

IEC 60169-1-1-1987射频连接器.第1部分:一般要求和测量方法.第1节:电气试验

和测量方法:反射系数

Radio-frequency connectors. Part 1 : General requirements and measuring methods. SectionOne: Electrical tests and measuring procedures: Reflection factor31P;A4

IEC 60169-1-1987 射频连接器.第1部分:一般要求和测量方法Radio-frequency connectors. Part 1 : General requirements and measuring methods67P;A4

IEC 60169-12-1979射频连接器.第12部分:螺纹连接、非匹配射频同轴连接器

(UHF型)

Radio-frequency connectors. Part 12 : R.F. coaxial connectors with screw coupling, unmatched(Type UHF)11P;A4

IEC 60169-1-3 AMD 1-1996射频连接器.第1部分:一般要求和测量方法.第3节:电气试验

和测量程序:屏蔽功能.补充件1

Radio-frequency connectors - Part 1: General requirements and measuring methods - Section 3:Electrical tests and measuring procedures: Screening effectiveness; Amendment 13P;A4

IEC 60169-13 AMD 1-1996射频连接器.第13部分:外导体内径为5.6mm(0.22in)、特性

阻抗为75Ω(1.6/5.6型)、特性阻抗为50Ω(1.8/5.6型)相同连

接尺寸的射频同轴连接器.补充件1

Radio frequency connectors - Part 13: RF coaxial connectors with inner diameter of outerconductor 5,6 mm (0,22 in) - Characteristic impedance 75 ohms (type 1,6/5,6) - Characteristicimpedance 50 ohms (type 1,8/5,6) with similar mating dimensions; Amendment 135P;A4

IEC 60169-13-1976射频连接器.第13部分:外导体内径为5.6mm(0.22in)、特性

阻抗为75Ω(1.6/5.6型)、特性阻抗为50Ω(1.8/5.6型)相同连

接尺寸的射频同轴连接器

Radio-frequency connectors. Part 13 : R.F. coaxial connectors with inner diameter of outerconductor 5.6 mm (0.22 in) - Characteristic impedance 75 ohms (Type1.8/5.6) with similar matingdimensions.37P A4

IEC 60169-1-3-1988射频连接器.第1部分:一般要求和测量方法.第3节:电气试验

和测量方法:屏蔽效率

Radio-frequency connectors. Part 1: General requirements and measuring methods. SectionThree - Electrical tests and measuring procedures : Screening effectiveness

IEC 60169-14-1977射频连接器.第14部分:外导体内径为12mm(0.472in)、螺纹

连接、特性阻抗为75Ω的射频同轴连接器(3.5/12型)

Radio-frequency connectors. Part 14 : R.F. coaxial connectors with inner diameter of outerconductor 12mm(O.472 in) with screw coupling - Characteristic impedance 75 Ohms (Type3.5/12)

（45） 351

IEC标准目录


开本页数

IEC 60169-15 AMD 1-1996射频连接器.第15部分:外导体内径为4.13mm(0.163in)、螺

纹连接、特性阻抗为50Ω的射频同轴连接器(SMA型).补充

件1

Radio frequency connectors - Part 15: RF coaxial connectors with inner diameter of outerconductor 4,13 mm (0,163 in) with screw coupling - Characteristic impedance 50 ohms (typeSMA); Amendment 135P;A4


纹连接、特性阻抗为50Ω的射频同轴连接器(SMA型)

Radio-frequency connectors. Part 15 : R.F. coaxial connectors with inner diameter of outerconductor 4.13mm(0.163 in) with screw coupling - Characteristic impedance 50 Ohms (TypeSMA)

IEC 60169-16 AMD 1-1996射频连接器.第16部分:外导体内径为7mm(0.276in)、螺纹

连接、特性阻抗为50Ω、75Ω的射频同轴连接器(N型).补充

件1

Radio frequency connectors - Part 16: RF coaxial connectors with inner diameter of outerconductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms)(type N); Amendment 135P;A4

IEC 60169-16-1982射频连接器.第16部分:外导体内径为7mm(0.276in)、螺纹

连接、特性阻抗为50Ω、75Ω的射频同轴连接器(N型)

Radio-frequency connectors. Part 16 : R.F. coaxial connectors with inner diameter of outerconductor 7mm(0.276 in) with screw coupling - Characteristic impedance 50 Ohms (75 Ohms)(Type N)

IEC 60169-17 AMD 1-1993 第1次修改

Radio-frequency connectors; part 17: R.F. coaxial connectors with inner diameter of outerconductor 6,5 mm (0,256 in) with screw coupling; characteristic impedance 50 ohms (type TNC);amendment 1


纹连接、特性阻抗为50Ω的射频同轴连接器(TNC型)

Radio-frequency connectors. Part 17 : R.F. coaxial connectors with inner diameter of outerconductor 6.5mm(0.256 in) with screw coupling - Characteristic impedance 50 Ohms (Type TNC)35P;A4


纹连接、特性阻抗为50Ω的射频同轴连接器(SSMA型)

Radio-frequency connectors. Part 18 : R.F. coaxial connectors with inner diameter of outerconductor 2.79 mm (O.110 in) with screw coupling - Characteristic impedance 50 ohms (TypeSSMA)

IEC 60169-19-1985射频连接器.第19部分:外导体内径为2.08mm(0.082in)、特

性阻抗为50Ω的射频同轴连接器(SSMB型)

Radio-frequency connectors. Part 19 : R.F coaxial connectors with inner diameter of outerconductor 2.08 mm (0.082 in) with snap coupling - Characteristic impedance 50 ohms (TypeSSMB)

IEC 60169-2 AMD 1-1982 射频连接器.第2部分:非匹配同轴连接器.第1次修改 Radio-frequency connectors. Part 2 : Coaxial unmatched connector


纹连接、特性阻抗为50Ω的射频同轴连接器(SSMC型)

Radio-frequency connectors. Part 20 : R.F. coaxial connectors with inner diameter of outerconductor 2.08 mm (0.082 in) with screw coupling - Characteristic impedance 50 ohms (TypeSSMC)

IEC 60169-21 AMD 1-1996射频连接器.第21部分:外导体内径为9.5mm(0.374in),不同

型式的螺纹连接,特性阻抗为50Ω,两种型式的射频连接器

(SC-A和SC-B)

Radio frequency connectors - Part 21: Two types of radio-frequency connectors with innerdiameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling -Characteristic impedance 50 ohms (types SC-A and SC-B); Amendment 13P;A4

IEC 60169-21-1985射频连接器.第21部分:外导体内径为9.5mm(0.374in)、不

同型式的螺纹连接、特性阻抗为50Ω、两种型式的射频连

接器(SC-A和SC-B型)

Radio-frequency connectors. Part 21 : Two types of radio-frequency connectors with innerdiameter of outer conductor 9.5 mm (O.374 in) with different versions of screw coupling -Characteristic impedance 50 ohms (Types SC-A and SC-B)35P;A4

IEC 60169-2-1965 射频连接器.第2部分:非匹配同轴连接器Radio-frequency connectors. Part 2 : Coaxial unmatched connector5P;A4

（46） 351

IEC标准目录


开本页数

IEC 60169-22-1985射频连接器.第22部分:与双内导体屏蔽平衡电缆配用的卡

口连接式二极射频连接器(BNO型)

Radio-frequency connectors. Part 22 : R.F. two-pole bayonet coupled connectors for use withshielded balanced cables having twin inner conductors (Type BNO)21P;A4

IEC 60169-23-1991射频连接器.第23部分:外导体内径3.5mm(0.1378in)、用于

3.5mm刚性同轴电缆线路的插销插座式射频连接器

Radio-frequency connectors, part 23: pin and socket connector for use with 3,5 mm rigidprecision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)13P;A4

IEC 60169-24-1991射频连接器.第24部分:一般用于75欧姆电缆分配系统(F型)螺纹联接的射频同轴连接器

Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling,typically for use in 75 ohm cable distribution systems (type F)11P;A4

IEC 60169-25-1992射频连接器.第25部分:外导体直径为

13.56mm(0.534in)(TWHN型)双内导体屏蔽平衡电缆配

(3/4-20UNEF)双极螺丝偶合(3/4-20UNEF)连接器

Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for usewith shielded balanced cables having twin inner conductors with inner diameter of outerconductor 13,56 mm (0,534 in) (type TWHN)13P;A4

IEC 60169-26-1993射频连接器.第26部分:有螺纹连接的射频同轴连接器.50Ω特性阻抗.频率范围0-18Hz (18GHz TNC type)

Radio-frequency connectors; part 26: R.F. coaxial connectors with screw coupling; characteristicimpedance 50 ohms; frequency range 0 to 18 GHz (type TNC 18 GHz)19P;A4

IEC 60169-27-1994射频连接器.第27部分:带有螺纹接口的射频连接器:主要用

于75Ω电缆分配系统(E型).,　　.,.射系数

Radio-frequency connectors; part 27: radio-frequency coaxial connectors with screw coupling,typically for use in 75 ohms cable distribution systems (type E)15P;A4

IEC 60169-28-1994射频连接器.第28部分:外导体内径为5.60mm(0.220),螺纹

锁定,特性阻抗为75Ω的射频同轴连接器

Radio-frequency connectors; part 28: radio-frequency coaxial connectors with inner diameter ofouter conductor of 5,60 mm (0,220 in) with snap-on coupling; characteristic impedance 75 ohms15P;A4

IEC 60169-29-1995射频连接器.第29部分:用螺丝,压紧和搭接联接或滑动导轨

和面板操作的小型r.f.同轴线连接件.电阻50欧姆的特性(型号1,0/2,3)

Radio frequency connectors - Part 29: Miniature r.f. coaxial connectors with screw-, push-pull,and snap-on coupling or slide-in rack and panel applications - Characteristic impedance 50 ohms(type 1, 0/2, 3)35P;A4

IEC 60169-3-1965 射频连接器.第3部分:双股平衡天线馈线用双插针连接器Radio-frequency connectors. Part 3 : Two-pin connector for twin balanced aerial feeders13P;A4

IEC 60169-4-1975射频连接器.第4部分:外导体内径为16mm(0.63in)、螺纹锁

定、特性阻抗为50Ω的射频同轴连接器

Radio-frequency connectors. Part 4 : R.F. coaxial connectors with inner diameter of outerconductor 16 mm (0.63 in) with screw lock. Characteristic impedance 50 ohms (Type 7-16)33P;A4

IEC 60169-5-1970 射频连接器.第5部分:96IEC50-17及更大电缆用射频同轴连

接器

Radio-frequency connectors. Part 5 : R.F. coaxial connectors for cables 96 IEC 60050-17 andlarger

IEC 60169-6-1971 射频连接器.第6部分:96IEC75-17及更大电缆用射频同轴连

接器

Radio-frequency connectors. Part 6 : R.F. coaxial connectors for cables 96 IEC 60075-17 andlarger

IEC 60169-7 AMD 1-1993 第1次修改

Radio-frequency connectors; part 7: R.F. coaxial connectors with inner diameter of outerconductor 9,5 mm (0.374 in) with bayonet lock; characteristic impedance 50 ohms (type C);amendment 1

（47） 351

IEC标准目录


开本页数

IEC 60169-7-1975射频连接器.第7部分:外导体内径为9.5mm(0.374in)、卡口

锁定、特性阻抗为50Ω的射频同轴连接器(C型)

Radio-frequency connectors. Part 7 : R.F. coaxial connectors with inner diameter of outerconductor 9.5 mm (0.374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C)39P;A4

IEC 60169-8 AMD 1-1996射频连接器.第8部分:外导体内径为6.5mm(0.256in)、卡口

锁定、特性阻抗为50Ω的射频同轴连接器(BNC型).补充件1

Radio frequency connectors - Part 8: RF coaxial connectors with inner diameter of outerconductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC);Amendment 1

IEC 60169-8 AMD 2-1997射频连接器.第8部分:外导体内径为6.5mm(0.256in)、卡口

锁定、特性阻抗为50Ω的射频同轴连接器(BNC型).修改件2

Radio-frequency connectors - Part 8: R.F. coaxial connectors with inner diameter of outerconductor 6,5 mm (0,256 in) with bayonet lock - Characteristics impedance 50 ohms (TypeBNC); Amendment 2

IEC 60169-8-1978射频连接器.第8部分:外导体内径为6.5mm(0.256in)、卡口

锁定、特性阻抗为50Ω的射频同轴连接器(BNC型)

Radio-frequency connectors. Part 8 : R.F. coaxial connectors with inner diameter of outerconductor 6.5 mm (0.256 in) with bayonet lock - Characteristic impedance 50 ohms (Type BNC)47P;A4

IEC 60169-9 AMD 1-1996射频连接器.第9部分:外导体内径为3mm(0.12in)、螺纹连

接、特性阻抗为50Ω的射频同轴连接器(SMC型).补充件1

Radio frequency connectors - Part 9: RF coaxial connectors with inner diameter of outerconductor 3 mm (0,12 in) with screw coupling - Characteristic impedance 50 ohms (type SMC);Amendment 1

IEC 60169-9-1978射频连接器.第9部分:外导体内径为3mm(0.12in)、螺纹连

接、特性阻抗为50Ω的射频同轴连接器(SMC型)

Radio-frequency connectors. Part 9 : R.F. coaxial connectors with inner diameter of outerconductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC)37P;A4

IEC 60171 AMD 1-1969 印制线路板连接器的基本参数.第1次修改 Fundamental parameters of connectors for printed wiring boards

IEC 60171-1964 印制线路板连接器的基本参数Fundamental parameters of connectors for printed wiring boards10P;A4

IEC 60172 AMD 1-1997 测定漆包绕组线温度指数的试验规程.修订件1Test procedure for the determination of the temperature index of enamelled winding wires;Amendment 115P;A4

IEC 60172-1987 测定漆包绕组线温度指数的试验规程Test procedure for the determination of the temperature index of enamelled winding wires39P;A4

IEC 60173-1964 软电缆和软线芯线的颜色Colours of the cores of flexible cables and cords5P;A4

IEC 60183 AMD 1-1990 高压电缆选择指南.第1次修改Guide to the selection of high-voltage cables; amendment 1 to IEC 60183:19843P;A4

IEC 60183-1984 高压电缆选择导则Guide to the selection of high-voltage cables17P;A4

IEC 60188-2001 高压汞蒸汽灯.性能规范High pressure mercury vapour lamps - Performance specifications74P;A4

IEC 60189-1 AMD 3-1992 第3次修改Low-frequency cables and wires with PVC insulation and PVC sheath; part 1: general test andmeasuring methods; amendment 35P;A4

IEC 60189-1-1986聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第1部分:一般试验和测量方法

Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 1 : General test andmeasuring methods33P;A4

（48） 351

IEC标准目录


开本页数

IEC 60189-2 AMD 1-1989聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第2部分:内部装置用双芯、三芯、四芯和五芯电缆.第2次修订

Low-frequency cables and wires with PVC insulation and PVC sheath; part 2: cables in pairs,triples, quads and quintuples for inside installations; amendment No. 1 to IEC 60189-2:19815P;A4

IEC 60189-2 AMD 2-1996聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第2部分:内部装置用双芯、三芯、四芯和五芯电缆.修改件2

Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath - Part 2: Cables in pairs,triples, quads and quintuples for inside installations; Amendment 27P;A4

IEC 60189-2-1981聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第2部分:内部装置用双芯、三芯、四芯和五芯电缆

Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 2 : Cables in pairs,triples, quads and quintuples for inside installations39P;A4

IEC 60189-3 AMD 1-1989聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第3部分:聚氯乙烯绝缘的单股、双股、三股实心或绞合线.第1次修

订

Low-frequency cables and wires with PVC insulation and PVC sheath; part 3: equipment wireswith solid or stranded conductor, PVC insulated, in singles, pairs and triples; amendment No. 1 topublication 60189-3:19885P;A4

IEC 60189-3-1988聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第3部分:聚氯乙烯绝缘的单股、双股、三股实心或绞合线

Low-frequency cables and wires with P.V.C. insulation and P.V.C. sheath. Part 3: Equipmentwires with solid or stranded conductor, PVC insulated, in singles, pairs and triples29P;A4

IEC 60189-4 AMD 1-1989聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第4部分:配电用聚氯乙烯绝缘的实心导体双股、三股、四股和五股配电用线.第1次修订

Low-frequency cables and wires with PVC insulation and PVC sheath; part 4: distribution wireswith solid conductors, PVC insulated, in pairs, triples, quads and quintuples; amendment No. 1 topublication 60189-4:19803P;A4

IEC 60189-4-1980聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第4部分:配电用聚氯乙烯绝缘的实心导体双股、三股、四股和五股配电用线

Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 4 : Distribution wireswith solid conductors, p.v.c. insulated, in pairs, triples, quads and quintuples19P;A4

IEC 60189-5 AMD 2-1992 第2次修改

Low-frequency cables and wires with PVC insulation and PVC sheath; part 5: equipment wiresand cables with solid or stranded conductors, PVC insulated, screened, single or one pair;amendment 2

IEC 60189-5-1980聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第5部分:聚氯乙烯绝缘的实心或绞合导体单股(芯)或双股(芯)设备用

电线和电缆

Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 5 : Equipment wiresand cables with solid or stranded conductors, p.v.c. insulated, screened, single or one pair29P;A4

IEC 60189-6 AMD 1-1989聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第6部分:电信设备和设施用单芯信号电缆.第1次修订

Low-frequency cables and wires with PVC insulation and PVC sheath; part 6: signalling cables insingles for telecommunication equipment and installation; amendment 1 to IEC 60189-6:19825P;A4

IEC 60189-6-1982聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第6部分:电信设备和设施用单芯信号电缆

Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 6 : Signalling cablesin singles for telecommunication equipment and installation23P;A4

IEC 60189-7 AMD 1-1989聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第7部分:聚氯乙烯绝缘、聚酰胺涂覆的实心导体单股、双股、三股、四股和五股配电用线.第1次修订

Low-frequency cables and wires with PVC insulation and PVC sheath; part 7: distribution wireswith solid conductors, PVC insulated, polyamide coated, in singles, pairs, triples, quads andquintuples; amendment No. 1 to publication 60189-7:19823P;A4

（49） 351

IEC标准目录


开本页数

IEC 60189-7-1982聚氯乙烯绝缘和聚氯乙烯护套的低频电缆和电线.第7部分:聚氯乙烯绝缘、聚酰胺涂覆的实心导体单股、双股、三股、四股和五股配电用线

Low-frequency cables and wires with p.v.c. insulation and p.v.c. sheath. Part 7 : Distribution wireswith solid conductors, p.v.c. insulated, polyamide coated, in singles, pairs, triples, quads orquintuples

IEC 60190-1966 2型非线绕电位器Non-wirewound potentiometers Type 260P;A4

IEC 60191-1-1966 半导体器件的机械标准化.第1部分:半导体器件图的绘制Mechanical standardization of semiconductor devices. Part 1 : Preparation of drawings ofsemiconductor devices59P;A4

IEC 60191-1A-1969 第1次补充Mechanical standardization of semiconductor devices. Part 1 : Preparation of drawings ofsemiconductor devices.5P;A4

IEC 60191-1B-1970 第2次补充Mechanical standardization of semiconductor devices. Part 1 : Preparation of drawings ofsemiconductor devices.6P;A4

IEC 60191-1C-1974 第3次补充Mechanical standardization of semiconductor devices. Part 1 : Preparation of drawings ofsemiconductor devices.14P;A4

IEC 60191-2 AMD 1-2001 半导体器件的机械标准化.第2部分:尺寸.修改件1Mechanical standardization of semiconductor devices - Part 2: Dimensions; Amendment 117P;A4




IEC 60191-2 AMD 5-2002 半导体器件的机械标准化.第2部分:尺寸Mechanical standardization of semiconductor devices - Part 2: Dimensions12P;A4


IEC 60191-2-1966 半导体器件的机械标准化.第2部分:尺寸Mechanical standardization of semiconductor devices. Part 2 : Dimensions68P;A4

IEC 60191-2A-1967 第1次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.41P;A4

IEC 60191-2B-1969 第2次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.39P;A4

IEC 60191-2C-1970 第3次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.25P;A4

IEC 60191-2D-1971 第4次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.79P;A4

（50） 351

IEC标准目录


开本页数

IEC 60191-2E-1974 第5次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.34P;A4

IEC 60191-2F-1976 第6次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.44P;A4

IEC 60191-2G-1978 第7次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.14P;A4

IEC 60191-2H-1978 第8次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.11P;A4

IEC 60191-2J-1980 第10次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.75P;A4

IEC 60191-2K-1981 第11次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.20P;A4

IEC 60191-2L-1982 第12次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.23P;A4

IEC 60191-2M-1983 第13次补充Mechanical standardization of semiconductor devices. Part 2 : Dimensions.20P;A4

IEC 60191-2N-1987 第14次补充 Mechanical standardization of semiconductor devices. Part 2 : Dimensions.

IEC 60191-2P-1988半导体器件的机械标准化.第2部分:尺寸.IEC 191-2:1966的第14次修改

Mechanical standardization of semiconductor devices; part 2: dimensions; fourteenth supplementto IEC 191-2:196666P;A4

IEC 60191-2Q-1990 第17次补充Fifteenth supplement to IEC 191-2 (1966); mechanical standardization of semiconductor devices;part 2: dimensions;75P;A4

IEC 60191-2R-1995半导体器件的机械标准化.第2部分:尺寸.IEC 191-2-66标准

的第16次补充

Mechanical standardization of semiconductor devices - Part 2: Dimensions; Supplement 16 toIEC 60191-2(1966)65P;A4

IEC 60191-2S-1995半导体器件的机械标准化.第2部分:尺寸.IEC 191-2(1966)补充件17

Mechanical standardization of semiconductor devices - Part 2: Dimensions; 17. Supplement toIEC 191-2 (1966)9P;A4

IEC 60191-2T-1996半导体器件的机械标准化.第2部分:尺寸.IEC 191-2(1966)补充件18

Mechanical standardization of semiconductor devices - Part 2: Dimensions; Supplement 184P;A4

IEC 60191-2U-1997 半导体器件的机械标准化.第2部分:尺寸.补充件19Mechanical standardization of semiconductor devices - Part 2: Dimensions; Supplement 1915P;A4

IEC 60191-2V-1998 半导体器件的机械标准化.第2部分:尺寸.补充件20Mechanical standardization of semiconductor devices - Part 2: Dimensions; Supplement 2022P;A4

IEC 60191-2W-1999 半导体器件的机械标准化.第2部分:尺寸.第21次补充Mechanical standardization of semiconductor devices - Part 2: Dimensions; Supplement 2127P;A4

IEC 60191-2X-1999 半导体器件的机械标准化.第2部分:尺寸.补充件22Mechanical standardization of semiconductor devices - Part 2: Dimensions; Supplement 2232P;A4

（51） 351

IEC标准目录


开本页数

IEC 60191-2Y-2000 半导体器件的机械标准化.第2部分:尺寸.补充件23Mechanical standardization of semiconductor devices - Part 2: Dimensions (23rd Supplement toPublication 60191-2:1966)51P;A4

IEC 60191-2Z-2000 半导体器件的机械标准化.第2部分:尺寸.补充件24 Mechanical standardization of semiconductor devices - Part 2: Dimensions; Supplement 24

IEC 60191-3-1999半导体器件的机械标准化.第3部分:集成电路略图制备的一

般规则

Mechanical standardization of semiconductor devices - Part 3: General rules for the preparationof outline drawings of integrated circuits113P;A4

IEC 60191-4 AMD 1-2001半导体器件的机械标准化.第4部分:半导体器件封装外形图

类型的划分和编号系统.修改件1

Mechanical standardization of semiconductor devices - Part 4: Coding system and classificationinto forms of package outlines for semiconductor device packages; Amendment 15P;A4

IEC 60191-4 AMD 2-2002半导体器件的机械标准化.第4部分:半导体器件封装外壳形

式的分类和编码系统.修改件2

Mechanical standardization of semiconductor devices - Part 4: Coding system and classificationinto forms of package outlines for semiconductor device packages; Amendment 25P;A4

IEC 60191-4 Edition 2.2-2002半导体器件的机械标准化.第4部分:半导体器件封装外壳形

式的分类和编码系统

Mechanical standardization of semiconductor devices - Part 4: Coding system and classificationinto forms of package outlines for semiconductor device packages43P;A4

IEC 60191-4-1999半导体器件的机械标准化.第4部分:半导体器件封装外壳形

式的分类和编码系统

Mechanical standardization of semiconductor devices - Part 4: Coding system and classificationinto forms of package outlines for semiconductor device packages39P;A4

IEC 60191-5-1997半导体器件的机械标准化.第5部分:使用自动粘结装置用于

集成电路包装的推荐规程

Mechanical standardization of semiconductor devices - Part 5: Recommendations applying tointegrated circuit packages using tape automated bonding (TAB)71P;A4

IEC 60191-6 AMD 1-1999半导体器件的机械标准化.第6部分:平面式安装半导体器件

外壳外形图绘制的一般规则.修改件1

Mechanical standardization of semiconductor devices - Part 6: General rules for the preparationof outline drawings of surface mounted semiconductor device packages; Amendment 120P;A4

IEC 60191-6-1-2001半导体器件的机械标准化.第6-1部分:平面式安装半导体器

件外壳外形图绘制的一般规则.海鸥翼式铅终端的设计指南

Mechanical standardization of semiconductor devices - Part 6-1: General rules for thepreparation of outline drawings of surface mounted semiconductor device packages; Designguide for gull-wing lead terminals7P;A4

IEC 60191-6-12-2002半导体器件的机械标准化.第6-12部分:表面安装半导体器

件封装外形图绘制的一般规则.小节距栅极矩阵列的设计指

南

Mechanical standardization of semiconductor devices - Part 6-12: General rules for thepreparation of outline drawings of surface mounted semiconductor device packages; Designguide for fine-pitch land grid array (FLGA); Rectangular type20P;A4

IEC 60191-6-1990半导体器件的机械标准化.第6部分:平面式安装半导体器件

外壳外形图绘制的一般规则

Mechanical standardization of semiconductor devices; part 6: general rules for the preparation ofoutline drawings of surface mounted semiconductor device packages37P;A4

IEC 60191-6-2-2001半导体器件的机械标准化.第6-2部分:绘制表面安装半导体

器件封装外形图的一般规则.1.5mm、1.27mm和1.00mm树脂球和引线端子封装的设计指南

Mechanical standardization of semiconductor devices - Part 6-2: General rules for thepreparation of outline drawings of surface mounted semiconductor device packages; Designguide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages10P;A4

（52） 351

IEC标准目录


开本页数

IEC 60191-6-3-2000半导体器件的机械标准化.第6-3部分:表面安装半导体器件

封装外形图绘制的一般规则.四面扁平部件封装尺寸的测量

方法

Mechanical standardization of semiconductor devices - Part 6-3: General rules for thepreparation of outline drawings of surface mounted semiconductor device packages; Measuringmethods for package dimensions of quad flat packs (QFP)


外壳外形图绘制的一般规则.小螺距刃片栅格排列的设计指

南

Mechanical standardization of semiconductor devices - Part 6-5: General rules for thepreparation of outline drawings of surface mounted semiconductor device packages; Designguide for fine-pitch ball grid array (FBGA)10P;A4

IEC 60191-6-6-2001半导体器件的机械标准化.第6-6部分:平面式安装半导体器

件外壳外形图绘制的一般规则.小螺距刃片栅格排列的设计

指南

Mechanical standardization of semiconductor devices - Part 6-6: General rules for thepreparation of outline drawings of surface mounted semiconductor device packages; Designguide for fine pitch land grid array (FLGA)12P;A4


封装外形图绘制的一般规则.玻璃密封的陶瓷四边形扁平组

件的设计指南(G-QFP)

Mechanical standardization of semiconductor devices - Part 6-8: General rules for thepreparation of outline drawings of surface mounted semiconductor device packages; Designguide for glass sealed ceramic quad flatpack (G-QFP)10P;A4

IEC 60192-2001 低压钠蒸汽灯.性能规范Low pressure sodium vapour lamps - Performance specifications54P;A4

IEC 60193-1999 水轮机、存储泵和水泵水轮机.模型验收试验Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests569P;A4

IEC 60194-1999 印制板设计,制造和组装.术语和定义Printed board design, manufacture and assembly - Terms and definitions116P;A4

IEC 60195-1965 固定电阻器产生的电流噪声的测量方法Method of measurement of current noise generated in fixed resistors27P;A4

IEC 60196-1965 IEC 标准频率I E C standard frequencies5P;A4

IEC 60197-1965 电视接收机用阻燃绝缘高压连接线High-voltage connecting wire with flame retarding insulation for use in television receivers15P;A4

IEC 60204-1 AMD 1-1999 机械安全.机器电动设备.第1部分:一般要求.补充件1Safety of machinery - Electrical equipment of machines - Part 1: General requirements;Amendment 1

IEC 60204-1 Edition 4.1-2000 机械安全.机器电动设备.第1部分:一般要求Safety of machinery - Electrical equipment of machines - Part 1: General requirements201P;A4

IEC 60204-11-2000机械安全.机器电动设备.第11部分:1000V a.c 或1500V d.c以上和36KV以下电压的HV设备的要求

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HVequipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV111P;A4

IEC 60204-1-1997 机械安全.机器电气设备.第1部分:一般要求Safety of machinery - Electrical equipment of machines - Part 1: General requirements183P;A4

IEC 60204-31-2001机械安全.机器用电气设备.第31部分:缝纫机、部件和系统

的特定安全性和EMC要求

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMCrequirements for sewing machines, units and systems49P;A4

（53） 351

IEC标准目录


开本页数

IEC 60204-32-1998 机械的安全性.机械电气设备.第32部分:升降机的要求Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoistingmachines

IEC 60205-2001 磁性零件有效参数的计算Calculation of the effective parameters of magnetic piece parts24P;A4

IEC 60211-1966 1.0级大需量指示器Maximum demand indicators, Class 1.O.21P;A4

IEC 60212-1971 固体电气绝缘材料试验前和试验中所用标准条件Standard conditions for use prior to and during the testing of solid electrical insulating materials17P;A4

IEC 60214-1-2003 抽头切换开关.第1部分:性能要求和试验方法Tap-changers - Part 1: Performance requirements and test methods128P;A4

IEC 60215 AMD 2-1993 无线电发射设备的安全要求.第2次修改Safety requirements for radio transmitting equipment; amendment 25P;A4

IEC 60215-1987 对无线电发射设备的安全要求Safety requirements for radio transmitting equipment49P;A4

IEC 60216-1-2001 电绝缘材料.耐热性能.第1部分:老化过程和试验结果评定Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures andevaluation of test results79P;A4

IEC 60216-2-1990电绝缘材料耐热性能的测定导则.第2部分:材料和适用试验

一览表

Guide for the determination of thermal endurance properties of electrical insulating materials; part2: choice of test criteria29P;A4

IEC 60216-3-2002 电绝缘材料.耐热性能.第3部分:耐热性计算说明Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculatingthermal endurance characteristics125P;A4

IEC 60216-4-1-1990电绝缘材料耐热性能的测定导则.第4部分:老化烘炉.第1节:单腔炉

Guide for the determination of thermal endurance properties of electrical insulating materials; part4: ageing ovens; section 1: single-chamber ovens17P;A4

IEC 60216-4-2-2000电绝缘材料.耐热性能.第4-2部分:老化烘炉.不超过300的

精密烘炉

Electrical insulating materials - Thermal endurance porperties - Part 4-2: Ageing ovens; Precisionovens for use up to 300 鳦33P;A4

IEC 60216-4-3-2000 电绝缘材料.耐热特性.第4-3部分:老化炉.多室炉Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens27P;A4

IEC 60216-5-2003电绝缘材料.耐热特性.第5部分:绝缘材料的相对耐热指数

(RTE)的测定

Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relativethermal endurance index (RTE) of an insulating material48P;A4

IEC 60227-1 AMD 1-1995额定电压450/750V及以下的聚氯乙烯绝缘电缆.第1部分:总要求.补充件1

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1:General requirements; Amendment 13P;A4

（54） 351

IEC标准目录


开本页数

IEC 60227-1 AMD 2-1998额定电压450/750V及以下的聚氯乙烯绝缘电缆.第1部分:总要求.补充件2

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1:General requirements; Amendment 29P;A4

IEC 60227-1 Edition 2.2-1998额定电压450/750V及以下的聚氯乙烯绝缘电缆.第1部分:一般要求

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1:General requirements48P;A4

IEC 60227-1-1993额定电压450/750V及以下的聚氯乙烯绝缘电缆.第1部分:总要求

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 1:general requirements41P;A4

IEC 60227-2-1997额定电压450/750V及以下的聚氯乙烯绝缘电缆.第2部分:试验方法

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Testmethods27P;A4

IEC 60227-3 AMD 1-1997额定电压450/750V及以下的聚氯乙烯绝缘电缆.第3部分:固定电路用非铠装电缆.修订件1

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring; Amendment 17P;A4

IEC 60227-3 Edition 2.1-1997额定电压450/750V及以下的聚氯乙烯绝缘电缆.第3部分:固定布线用无护套电缆

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring46P;A4

IEC 60227-4 AMD 1-1997额定电压450/750V及以下的聚氯乙烯绝缘电缆.第4部分:固定布线用铠装电缆.第1次修改

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4:Sheathed cables for fixed wiring; Amendment 13P;A4

IEC 60227-4 Edition 2.1-1997额定电压450/750V及以下的聚氯乙烯绝缘电缆.第4部分:固定布线用护套电缆

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4:Sheathed cables for fixed wiring28P;A4

IEC 60227-4-1992额定电压450/750V及以下的聚氯乙烯绝缘电缆.第4部分:固定布线用铠装电缆

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 4:sheathed cables for fixed wiring15P;A4

IEC 60227-5 AMD 1-1997额定电压450/750V及以下的聚氯乙烯绝缘电缆.第5部分:软电缆(软线).第1次修改

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5:Flexible cables (cords); Amendment 115P;A4

IEC 60227-5 Edition 2.1-1998额定电压450/750V及以下的聚氯乙烯绝缘电缆.第5部分:软电缆(软线)

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5:Flexible cables (cords)56P;A4

IEC 60227-5-1997额定电压450/750V及以下的聚氯乙烯绝缘电缆.第5部分:软电缆(软线)

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5:Flexible cables (cords)31P;A4

IEC 60227-6-2001额定电压450/750V及以下的聚氯乙烯绝缘电缆.第6部分:电梯电缆和软连接用电缆

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Liftcables and cables for flexible connections39P;A4

（55） 351

IEC标准目录


开本页数

IEC 60227-7-1995额定电压450/750V及以下的聚氯乙烯绝缘电缆.第7部分:屏蔽及未屏蔽的带有两个或多个导体的挠性电缆

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7:Flexible cables screened and unscreened with two or more conductors25P;A4

IEC 60228 AMD 1-1993 第1次修改Conductors of insulated cables; amendment 17P;A4

IEC 60228-1978 绝缘电缆的导体Conductors of insulated cables25P;A4

IEC 60228A-1982 第1次补充Conductors of insulated cables. Guide to the dimensional limits of circular conductors9P;A4

IEC 60229-1982 有特殊保护作用的挤压成型的电缆外护套的试验Tests on cable oversheaths which have a special protective function and are applied by extrusion14P;A4

IEC 60230-1966 电缆及其附件的冲击电压试验Impulse tests on cables and their accessories11P;A4

IEC 60231-1967 核反应堆仪器一般原理General principles of nuclear reactor instrumentation37P;A4

IEC 60231A-1969 第1次补充General principles of nuclear reactor instrumentation33P;A4

IEC 60231B-1972 第2次补充General principles of nuclear reactor instrumentation17P;A4

IEC 60231C-1974 第3次补充General principles of nuclear reactor instrumentation11P;A4

IEC 60231D-1975 第4次补充General principles of nuclear reactor instrumentation17P;A4

IEC 60231E-1977 第5次补充General principles of nuclear reactor instrumentation. Fifth supplement: Gascooled hightemperature power reactor with indirect-cycle turbines15P;A4

IEC 60231F-1977 第6次补充General principles of nuclear reactor instrumentation. Sixth supplement: Heavy-water-moderatedreactor with steam generating direct-cycle turbine19P;A4

IEC 60231G-1977 第7次补充General principles of nuclear reactor instrumentation. Seventh supplement: Liquid-metal cooledfast reactor23P;A4

IEC 60233 AMD 1-1988 电气设备用空心绝缘子的试验.第1次修订Tests on hollow insulators for use in electrical equipment7P;A4

IEC 60233-1974 电气设备用空心绝缘子的试验Tests on hollow insulators for use in electrical equipment19P;A4

IEC 60235-1-1972 微波管电性能的测量.第1部分:术语Measurement of the electrical properties of microwave tubes. Part 1 : Terminology55P;A4

IEC 60235-1A-1975 第1次补充Measurement of the electrical properties of microwave tubes. Part 1 : Terminology.33P;A4

（56） 351

IEC标准目录


开本页数

IEC 60235-2-1972 微波管电性能的测量.第2部分:一般测量Measurement of the electrical properties of microwave tubes. Part 2 : General measurements69P;A4

IEC 60235-2A-1974 第1次补充Measurement of the electrical properties of microwave tubes. Part 2 : General measurements.First supplement: Chapter V: Methods of measuring parasitic noise57P;A4

IEC 60235-2B-1975 第2次补充Measurement of the electrical properties of microwave tubes. Part 2 : General measurements.34P;A4

IEC 60235-2C-1976 第3次补充Measurement of the electrical properties of microwave tubes. Part 2 : General measurements.30P;A4

IEC 60235-2D-1976 第4次补充Measurement of the electrical properties of microwave tubes. Part 2 : General measurements.21P;A4

IEC 60235-2E-1976 第5次补充Measurement of the electrical properties of microwave tubes. Part 2 : General measurements.Fifth supplement: Methods of measuring the influence of nonlinearity43P;A4

IEC 60235-3-1972 微波管电性能的测量.第3部分:盘封管Measurement of the electrical properties of microwave tubes. Part 3 : Disk seal tubes23P;A4

IEC 60235-4-1972 微波管电性能的测量.第4部分:磁控管Measurement of the electrical properties of microwave tubes. Part 4 : Magnetrons20P;A4

IEC 60235-4A-1975 第1次补充Measurement of the electrical properties of microwave tubes. Part 4 : Magnetrons. Firstsupplement: Clause 4: Voltage tunable magnetron5P;A4

IEC 60235-5-1972 微波管电性能的测量.第5部分:小功率振荡器速调管Measurement of the electrical properties of microwave tubes. Part 5 : Low-power oscillatorklystrons

IEC 60235-6-1972 微波管电性能的测量.第6部分:大功率速调管Measurement of the electrical properties of microwave tubes. Part 6 : High-power klystrons21P;A4

IEC 60235-7-1972 微波管电性能的测量.第7部分:高频充气管Measurement of the electrical properties of microwave tubes. Part 7 : High frequency gas-filledtubes

IEC 60235-8-1972 微波管电性能的测量.第8部分:回波振荡管Measurement of the electrical properties of microwave tubes. Part 8 : Backward-wave oscillatortubes - "0" type15P;A4

IEC 60235-8A-1974 第1次补充Measurement of the electrical properties of microwave tubes. Part 8 : Backward-wave oscillatortubes - "0" type.2P;A4

IEC 60235-9-1975 微波管电性能的测量.第9部分:正交场放大管Measurement of the electrical properties of microwave tubes. Part 9 : Crossed-field amplifiertubes

IEC 60236-1974 阴极射线管静电偏转电极的命名方法Methods for the designation of electrostatic deflecting electrodes of cathode-ray tubes7P;A4

IEC 60238 AMD 1-1999 爱迪森螺纹灯座.修改件1Edison screw lampholders; Amendment 15P;A4

（57） 351

IEC标准目录


开本页数

IEC 60238 AMD 2-2002 爱迪森螺纹灯座.修改件2Edison screw lampholders; Amendment 27P;A4

IEC 60238 Edition 7.2-2002 爱迪生螺口灯座Edison screw lampholders141P;A4

IEC 60239-1997 电弧炉用的带螺纹座和连接销的圆柱形机加工石墨电极的公称尺寸

Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets andnipples for use in electric arc furnaces29P;A4

IEC 60240-1-1992 工业加热用电红外发射器的特性.第1部分:短波红外发射器Characteristics of electric infra-red emitters for industrial heating; part 1: short wave infra-redemitters

IEC 60243-1-1998 绝缘材料的电强度.试验方法.第1部分:电源频率下的试验Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies47P;A4

IEC 60243-2-2001绝缘材料的介电强度.试验方法.第2部分:用直流电压测试的

补充技术要求

Electric strength of insulating materials - Test methods - Part 2: Additional requirements for testsusing direct voltage13P;A4

IEC 60243-3-2001绝缘材料的介电强度试验方法.第3部分:1.2/50μS冲击试验

补充要求

Electric strength of insulating materials - Test methods - Part 3: Additional requirements for1,2/50 鎠 impulse tests17P;A4

IEC 60244-10-1986无线电发射机的测量方法.第10部分:采用插入测试信号的

电视发射机和差转机的测量方法

Methods of measurement for radio transmitters. Part 10 : Methods of measurement for televisiontransmitters and transposers employing insertion test signals81P;A4

IEC 60244-11-1989 无线电发射机的测量方法.第11部分:无线电差转机的测量

方法

Methods of measurement for radio transmitters; part 11: transposers for FM sound broadcasting41P;A4

IEC 60244-1-1999 无线电发射机的测量方法.第1部分:广播发射机的总特征Methods of measurement for radio transmitters - Part 1: General characteristics for broadcasttransmitters79P;A4

IEC 60244-12-1-1989无线电发射机的测量方法.第12部分:音响设备和电视播放

设备用发射机和换位器的草拟说明导则.第1节:规定特性

Methods of measurement for radio transmitters; part 12: guideline for drawing up descriptiveleaflets for transmitters and transposers for sound and television broadcasting; characteristics tobe specified

IEC 60244-12-2-1989无线电发射机的测量方法.第12部分:音响设备和电视播放

设备用发射机和换位器的草拟说明导则.第2节:说明卡

Methods of measurement for radio transmitters; part 12: guideline for drawing up descriptiveleaflets for transmitters and transposers for sound and television broadcasting; specificationsheets

IEC 60244-13-1991 无线电发射机的测量方法.第13部分:调频播音的特有性能Methods of measurement for radio transmitters; part 13: performance characteristics for FMsound broadcasting59P;A4

IEC 60244-14-1997无线电发射机测量方法.第14部分:一个或多个使用一样或

邻近天线的发射机外部互调产品

Methods of measurement for radio transmitters - Part 14: External intermodulation productscaused by two or more transmitters using the same or adjacent antennas49P;A4

IEC 60244-15-1999无线电发射机的测量方法.第15部分:声音广播用调幅发射

机

Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters forsound broadcasting53P;A4

（58） 351

IEC标准目录


开本页数

IEC 60244-2 AMD 1-1974无线电发射机的测量方法.第2部分:带宽、带外功率和非主

振功率.第1次修订

Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power andpower of non-essential oscillations

IEC 60244-2-1969无线电发射机的测量方法.第2部分:带宽、带外功率和非主

振功率

Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power andpower of non-essential oscillations79P;A4

IEC 60244-2A AMD 1-1973无线电发射机的测量方法.第2部分:带宽、带外功率和非主

振功率.第1次补充:附录

Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power andpower of non-essential oscillations. First supplement: Appendices

IEC 60244-2A-1969 第2次补充Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power andpower of non-essential oscillations. First supplement: Appendices70P;A4

IEC 60244-2B-1969 第2次补充

Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power andpower of non-essential oscillations. Second supplement: Modulating signals for the measurementof bandwidth and out-of-band power of transmitters for telephony and sound broadcasting40P;A4

IEC 60244-3-1972 无线电发射机的测量方法.第3部分:有用调制和无用调制Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation81P;A4

IEC 60244-3A-1971 第1次补充Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation. Firstsupplement: Appendices23P;A4

IEC 60244-3B-1972 第2次补充Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation.Second supplement: Unwanted modulation, including hum and noise modulation31P;A4

IEC 60244-4-1973无线电发射机的测量方法.第4部分:无线电话和播音发射机

的幅/频特性及非线性失真

Methods of measurement for radio transmitters. Part 4 : Amplitude/frequency characteristics andnon-linearity distortion in transmitters for radiotelephony and sound broadcasting48P;A4

IEC 60244-4A-1976 第1次补充

Methods of measurement for radio transmitters. Part 4 : Amplitude/frequency characteristics andnon-linearity distortion in transmitters for radiotelephony and sound broadcasting. Firstsupplement: Section three47P;A4

IEC 60244-5-1992 无线电发射机的测量方法.第5部分:电视发射机的特性Methods of measurement for radio transmitters; part 5: performance characteristics of televisiontransmitters168P;A4

IEC 60244-6-1976无线电发射机的测量方法.第6部分:频率130KHz-1GHz的机箱辐射

Methods of measurement for radio transmitters. Part 6 : Cabinet radiation at frequencies between130 kHz and 1 GHz103P;A4

IEC 60244-7-1979 无线电发射机的测量方法.第7部分:频率1GHz以上的机箱

辐射

Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1GHz

IEC 60244-7A-1980 第1次补充Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1GHz. First supplement: Sections four and five: Medium-sized and large transmitters7P;A4

（59） 351

IEC标准目录


开本页数

IEC 60244-8-1993无线电发射机的测量方法.第8部分:检验电视发射机和换位

器用的残留边带解调器的特性

Methods of measurement for radio transmitters; part 8: performance characteristics of vestigal-sideband demodulators used for testing television transmitters and transposers49P;A4

IEC 60244-9-1993 无线电发射机的测量方法.第9部分:电视换位器的特性Methods of measurement for radio transmitters; part 9: performance characteristics for televisiontransposers81P;A4

IEC 60245-1 AMD 1-1997额定电压450/750V及以下的橡皮绝缘电缆.第1部分:一般要

求.修订件1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: Generalrequirements; Amendment 13P;A4

IEC 60245-1 AMD 2-1997额定电压450/750V及以下的橡胶绝缘电缆.第1部分:一般要

求.修订件2

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: Generalrequirements; Amendment 23P;A4

IEC 60245-1 Edition 3.2-1998额定电压450/750V及以下的橡皮绝缘电缆.第1部分:一般要

求

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: Generalrequirements64P;A4

IEC 60245-1-1994额定电压450/750V及以下的橡胶绝缘电缆.第1部分:一般要

求

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: Generalrequirements51P;A4

IEC 60245-2 AMD 1-1997额定电压450/750V及以下的橡胶绝缘电缆.第2部分:试验方

法.第1次修订

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods;Amendment 17P;A4

IEC 60245-2 AMD 2-1997额定电压450/750V及以下的橡胶绝缘电缆.第2部分:试验方

法.修订件2

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods;Amendment 211P;A4

IEC 60245-2 Edition 2.2-1998 额定电压450/750V及以下的橡皮绝缘电缆.第2部分:试验方

法

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods58P;A4

IEC 60245-2-1994 额定电压450/750V及以下的橡胶绝缘电缆.第2部分:试验方

法

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods36P;A4

IEC 60245-3 AMD 1-1997橡胶绝缘电缆.额定电压450/750V以下(包括其在内).第3部分:耐热硅绝缘电缆.修改件1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistantsilicone insulated cables; Amendment 13P;A4

IEC 60245-3-1994额定电压450/750V及以下的橡胶绝缘电缆.第3部分:耐热硅

绝缘电缆

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistantsilicone insulated cables11P;A4

IEC 60245-4 AMD 1-1997橡胶绝缘电缆.额定电压450/750V以下(包括其在内).第4部分:芯缆和柔性电缆.修改件1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords andflexible cables; Amendment 113P;A4

IEC 60245-4-1994额定电压450/750V及以下的橡胶绝缘电缆.第4部分:软线和

软电缆

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords andflexible cables43P;A4

（60） 351

IEC标准目录


开本页数

IEC 60245-5-1994 额定电压450/750V及以下的橡胶绝缘电缆.第5部分:提升电

缆

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables17P;A4

IEC 60245-6 AMD 1-1997橡胶绝缘电缆.额定电压450/750V以下(包括其在内).第6部分:弧焊电极电缆.修改件1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc weldingelectrode cables; Amendment 13P;A4

IEC 60245-6-1994额定电压450/750V及以下的橡胶绝缘电缆.第6部分:电弧焊

电极电缆

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc weldingelectrode cables13P;A4

IEC 60245-7 AMD 1-1997橡胶绝缘电缆.额定电压450/750V以下(包括其在内).第7部分:耐热乙烯乙酸乙烯酯橡胶绝缘电缆.修改件1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistantethylene-vinyl acetate rubber insulated cables; Amendment 15P;A4

IEC 60245-7-1994额定电压450/750V及以下的橡胶绝缘电缆.第7部分:耐热乙

烯-乙烯基醋酸脂橡胶绝缘电缆

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistantethylene-vinyl acetate rubber insulated cables19P;A4

IEC 60245-8-1998额定电压450/750V及以下的橡胶绝缘电缆. 第8部分:高柔

性要求适用的软线

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords forapplications requiring high flexibility31P;A4

IEC 60246-1967电视接收机用额定直流电压为20KV与25KV和高工作温

度为105的连接线

Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum workingtemperature of 105 鳦 for use in television receivers17P;A4

IEC 60247-1978 绝缘液体的相对介电常数、介质耗散因数和直流电阻率的测量

Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulatingliquids

IEC 60248-1984 核电子仪表用原盘的尺寸Dimensions of planchets used in nuclear electronic instruments9P;A4

IEC 60249-1 AMD 4-1993 第4次修改Base materials for printed circuits; part 1: test methods; amendment 417P;A4

IEC 60249-1-1982 印制电路用基材.第1部分:试验方法Base materials for printed circuits. Part 1 : Test methods81P;A4

IEC 60249-2-1 AMD 2-1993印制电路用基材.第2部分:规范.第1号规范:高电气质量的酚

醛纤维素纸覆铜层压板.修改件2

Base materials for printed circuits; part 2: specifications; specification 1: phenolic cellulose papercopper-clad laminated sheet, high electrical quality; amendment 27P;A4

IEC 60249-2-1 AMD 4-2000印制电路用基底材料.第2部分:规范.第1号规范:高电气质量

的酚醛纤维素纸覆铜层压板.修改件4

Base materials for printed circuits - Part 2: Specifications - Specification No. 1: Phenolic cellulosepaper copper-clad laminated sheet, high electrical quality; Amendment 49P;A4

IEC 60249-2-1,-3,-6,-7,-11,-12A

印制电路用基材.第2部分:规范.第1,3,6,7,11,12号规范.修改

件3

Base materials for printed circuits - Part 2: Specifications - Specifications Nos. 1, 3, 6, 7, 11 and12; Amendment 35P;A4

（61） 351

IEC标准目录


开本页数

IEC 60249-2-10 AMD 3-1993印制电路用基材.第2部分:规范.第10号规范:规定易燃性的

环氧化合物非机织或机织玻璃纤维增强覆铜层压板(垂直燃

烧试验).修改件3

Base materials for printed circuits; part 2: specifications; specification 10: epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (verticalburning test); amendment 311P;A4


环氧非编织/编织玻璃增强铜覆层压板(垂直燃烧试验).修改

件5

Base materials for printed circuits - Part 2: Specifications; Specification No. 10: Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (verticalburning test); Amendment 5

IEC 60249-2-10-1987印制电路用基材.第2部分:规范.第10号规范:规定易燃性的

环氧化合物非机织或机织玻璃纤维增强覆铜层压板(垂直燃

烧试验)

Base materials for printed circuits; part 2: specifications; specification No. 10: epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (verticalburning test)21P;A4

IEC 60249-2-1-1985印制电路用基材.第2部分:规范.第1号规范:高电气质量的酚

醛纤维素纸覆铜层压板

Base materials for printed circuits. Part 2 : Specifications. Specification No. 1: Phenolic cellulosepaper copper-clad laminated sheet, high electrical quality21P;A4

IEC 60249-2-13 AMD 1-1993 第1次修改Base materials for printed circuits; part 2: specifications; specification 13: flexible copper-cladpolyimide film, general purpose grade; amendment 15P;A4

IEC 60249-2-13-1987印制电路用基材.第2部分:规范.第13号规范:通用级软覆铜

聚酰亚胺薄膜,通用级

Base materials for printed circuits; part 2: specifications; Specification No. 13: flexible copper-clad polyimide film, general purpose grade

IEC 60249-2-14 AMD 3-1993印制电路用基材.第2部分:规范.第14号规范:限定可燃性的

酚醛纤维素纸镀铜层压板(垂直燃烧试验).修改件3

Base materials for printed circuits; part 2: specifications; specification 14: phenolic cellulosepaper copper-clad laminated sheet of defined flammability (vertical burning test), economicquality; amendment 311P;A4

IEC 60249-2-14 AMD 5-2000印制电路用基材.第2部分:规范.第14号规范:规定易燃性和

经济质量的酚醛纤维素纸铜覆层压板.(垂直燃烧试验).修改

件5

Base materials for printed circuits - Part 2: Specifications; Specification No. 14: Phenoliccellulose paper copper-clad laminated sheet of defined flammability (vertical burning test),economic quality; Amendment 5

IEC 60249-2-14-1988印制电路用基材.第2部分:规范.第14号规范:经济型规定易

燃性的酚醛纤维素纸覆铜层压板(垂直燃烧试验)

Base materials for printed circuits. Part 2: Specifications. Specification No. 14: Phenolic cellulosepaper copper-clad laminated sheet of defined flammability (vertical burning test), economicquality

IEC 60249-2-15 AMD 1-1993 第1次修改Base materials for printed circuits; part 2: specifications; specification 15: flexible copper-cladpolyimide film, of defined flammability; amendment 15P;A4

IEC 60249-2-15-1987 印制电路用基材.第2部分:规范.第15号规范:规定的易燃性

的软覆铜聚酰亚胺薄膜

Base materials for printed circuits. Part 2: Specifications. Specification No. 15: Flexible copper-clad polyimide films of defined flammability.

IEC 60249-2-16 AMD 1-1993印制电路用基材.第2部分.规范.第16号规范:规定易燃性的

聚酰亚胺玻璃纤维覆铜层压板(垂直燃烧试验).修改件1

Base materials for printed circuits; part 2: specifications; specification 16: polyimide woven glassfabric copper-clad laminated sheet of defined flammability (vertical burning test); amendment 13P;A4


聚酰亚胺编织玻璃布铜覆层压板.(垂直燃烧试验).修改件3

Base materials for printed circuits - Part 2: Specifications; Specification No. 16: Polyimide wovenglass fabric copper-clad laminated sheet of defined flammability (vertical burning test);

（62） 351

IEC标准目录


开本页数

IEC 60249-2-16 to 19 AMD 2-1994

印制电路用基材.第2部分.规范.第16-19号规范.修改件2Base materials for printed circuits - Part 2: Specifications - Specifications Nos. 16 to 19;Amendment 2

IEC 60249-2-16-1992印制电路用基材.第2部分.规范.第16号规范:规定易燃性的

聚酰亚胺玻璃纤维覆铜层压板(垂直燃烧试验)

Base materials for printed circuits; part 2: specifications; specification 16: polyimide woven glassfabric copper-clad laminated sheet of defined flammability (vertical burning test)31P;A4

IEC 60249-2-17 AMD 1-1993印制电路用基材.第2部分:规范.第17号规范.制造多层印制

板用的规定易燃性的薄聚酰亚胺玻璃纤维织物覆铜层压板.修改件1

Base materials for printed circuits; part 2: specifications; specification 17: thin polyimide wovenglass fabric copper-clad laminated sheet of defined flammability for use in the fabrication ofmultilayer printed boards; amendment 15P;A4

IEC 60249-2-17 AMD 3-2000印制电路用基材.第2部分:规范.第17号规范:多层预制板预

制用规定易燃性的薄聚酰亚胺编织玻璃布铜覆层压板.(垂直燃烧试验).修改件3

Base materials for printed circuits - Part 2: Specifications; Specification No. 17: Thin polyimidewoven glass fabric copper-clad laminated sheet of defined flammability for use in the fabricationof multilayer printed boards; Amendment 3

IEC 60249-2-17-1992印制电路用基材.第2部分:规范.第17号规范.制造多层印制

板用的规定易燃性的薄聚酰亚胺玻璃纤维织物覆铜层压板

Base materials for printed circuits; part 2: specifications; specification No. 17: thin polyimidewoven glass fabric copper-clad laminated sheet of defined flammability for use in the fabricationof multilayer printed boards27P;A4


双对马来酰压胺/三氮杂苯改良型环氧玻璃纤维编织覆铜层

压板(垂直燃烧试验).修改件1

Base materials for printed circuits; part 2: specifications; specification 18: bismaleimide/triazinemodified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (verticalburning test); amendment 13P;A4


双对马来酰亚胺/三氮杂苯改良式环氧编织玻璃布铜覆层压

板.(垂直燃烧试验).修改件3

Base materials for printed circuits - Part 2: Specifications; Specification No. 18:Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet ofdefined flammability (vertical burning test); Amendment 3

IEC 60249-2-18-1992印制电路用基材.第2部分:规范.第18号规范:规定易燃性的

比斯玛勒米德(bismaleimide)/三嗪改型环的氧化物玻璃纤

维编织覆铜层压板(垂直燃烧试验)

Base materials for printed circuits; part 2: specifications; specification 18: bismaleimide/triazinemodified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (verticalburning test)31P;A4

IEC 60249-2-19 AMD 1-1993 第1次修改

Base materials for printed circuits; part 2: specifications; specification 19: thinbismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet ofdefined flammability for use in the fabrication of multilayer printed boards; amendment 13P;A4

IEC 60249-2-19-1992印制电路用基材.第2部分:规范.第19号规范:制造多层印制

板用的规定可燃性能的薄比斯玛勒米德(bismaleimide)/三嗪改型的环氧化物玻璃纤维编织覆铜箔叠层板

Base materials for printed circuits; part 2: specifications; specification 19: thinbismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet ofdefined flammability for use in the fabrication of multilayer printed boards27P;A4

IEC 60249-2-2 AMD 3-1993印制电路用基材.第2部分:规范.第2号规范:酚醛纤维素纸覆

铜层压板,经济质量.修改件3

Base materials for printed circuits; part 2: specifications; specification 2: phenolic cellulose papercopper-clad laminated sheet, economic quality; amendment 39P;A4

（63） 351

IEC标准目录


开本页数

IEC 60249-2-2 AMD 5-2000印制电路用基底材料.第2部分:规范.第2号规范:经济质量的

酚醛纤维素纸覆铜层压板.修改件5

Base materials for printed circuits - Part 2: Specifications - Specification No. 2: Phenolic cellulosepaper copper-clad laminated sheet, economic quality; Amendment 511P;A4

IEC 60249-2-2,-4,-5,-9,-10,-14A

印制电路用基材.第2部分:规范.第2,4,5,9,10,14号规范.修改

件4

Base materials for printed circuits - Part 2: Specifications - Specifications Nos. 2, 4, 5, 9, 10 and14; Amendment 45P;A4

IEC 60249-2-2-1985印制电路用基材.第2部分:规范.第2号规范:经济型酚醛纤维

素纸覆铜层压板

Base materials for printed circuits. Part 2 : Specifications. Specification No. 2: Phenolic cellulosepaper copper-clad laminated sheet, economic quality19P;A4

IEC 60249-2-3 AMD 2-1993印制电路用基材.第2部分:规范.第3号规范:规定易燃性的环

氧化合物纤维素纸覆铜层压板(垂直燃烧试验).修改件2

Base materials for printed circuits; part 2: specifications; specification 3: epoxide cellulose papercopper-clad laminated sheet of defined flammability (vertical burning test); amendment 27P;A4

IEC 60249-2-3 AMD 4-2000印制电路用基底材料.第2部分:规范.第3号规范:规定易燃性

的环氧化合物纤维素纸铜覆层压板(垂直燃烧试验).修改件4

Base materials for printed circuits - Part 2: Specifications - Specification No. 3: Epoxide cellulosepaper copper-clad laminated sheet of defined flammability (vertical burning test); Amendment 411P;A4

IEC 60249-2-3-1987印制电路用基材.第2部分:规范.第3号规范:规定易燃性的环

氧化合物纤维素纸覆铜层压板(垂直燃烧试验)Base materials for printed circuits. Part 2 : Specifications. Specification No. 3: Epoxide cellulosepaper copper-clad laminated sheet of defined flammability (vertical burning test)

IEC 60249-2-6 AMD 4-2000印制电路用基材.第2部分:规范.第6号规范:具有规定易燃性

的酚醛纤维素纸覆铜层压板(水平燃烧试验).修改件4

Base materials for printed circuits - Part 2: Specifications; specification No. 6: Phenolic cellulosepaper copper-clad laminated sheet of defined flammability (horizontal burning test); Amendment4

IEC 60249-2-6-1985印制电路用基材.第2部分:规范.第6号规范:具有规定易燃性

的酚醛纤维素纸覆铜层压板(水平燃烧试验)

Base materials for printed circuits; part 2: specifications; specification No. 6: phenolic cellulosepaper copper-clad laminated sheet of defined flammability (horizontal burning test)23P;A4

IEC 60249-2-7 AMD 4-2000印制电路用基材.第2部分:规范.第7号规范:规定易燃性的酚

醛纤维素纸覆铜层压板(垂直燃烧试验).修改件4

Base materials for printed circuits - Part 2: Specifications; specification No. 7: Phenolic cellulosepaper copper-clad laminated sheet of defined flammability (vertical burning test); Amendment 411P;A4

IEC 60249-2-7-1987印制电路用基材.第2部分:规范.第7号规范:规定易燃性的酚

醛纤维素纸覆铜层压板(垂直燃烧试验)Base materials for printed circuits; part 2: specifications; specification No. 7: phenolic cellulosepaper copper-clad laminated sheet of defined flammability (vertical burning test)

IEC 60249-2-8 AMD 1-1993 第1次修改Base materials for printed circuits; part 2: specifications; specification 8: flexible copper-cladpolyester (PETP) film; amendment 15P;A4

IEC 60249-2-8-1987 印制电路用基材.第2部分:规范.第8号规范:软覆铜聚酯

(PETP)薄膜

Base materials for printed circuits; part 2: specifications; specification No. 8: flexible copper-cladpolyester (PETP) film

IEC 60249-2-9 AMD 3-1993印制电路用基材.第2部分:规范.第9号规范:易燃的具有环氧

纤维纸芯且表面覆铜的环氧玻璃布层压板(垂直燃烧试验).修改件3

Base materials for printed circuits; part 2: specifications; specification 9: epoxide cellulose papercore, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (verticalburning test); amendment 311P;A4

IEC 60249-2-9 AMD 5-2000印制电路用基材.第2部分:规范.第9号规范:规定易燃性的环

氧化合物纤维素纸、环氧玻璃布表面铜覆层压板(垂直燃烧

试验) 修改件5

Base materials for printed circuits - Part 2: Specifications; specification No. 9: Epoxide cellulosepaper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability(vertical burning test); Amendment 5

（64） 351

IEC标准目录


开本页数

IEC 60249-2-9-1987印制电路用基材.第2部分:规范.第9号规范:规定易燃性的环

氧化合物纤维素纸芯的环氧化合物玻璃布表面覆铜层压板(垂直燃烧试验)

Base materials for printed circuits; part 2: specifications; specification No. 9: epoxide cellulosepaper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability(vertical burning test)

IEC 60249-3-1-1981印制电路用基材.第3部分:印制电路用的特殊材料.第1号规

范:制造多层印制板中用作粘结片材料的预浸材料

Base materials for printed circuits. Part 3 : Special materials used in connection with printedcircuits. Specification No. 1: Prepreg for use as bonding sheet material in the fabrication ofmultilayer printed boards20P;A4

IEC 60249-3-3-1991印制电路用基材.第3部分:印制电路连接用特殊材料.第3号规范:制造印制电路板中用的永久性聚合物表面覆盖剂(防焊剂)

Base materials for printed circuits; part 3: special materials used in connection with printedcircuits; specification 3: permanent polymer coating materials (solder resist) for use in thefabrication of printed boards37P;A4

IEC 60250-1969电气绝缘材料在工频、音频和射频(包括米波长)下介电常

数和介质损耗因数的推荐测定方法

Recommended methods for the determination of the permittivity and dielectric dissipation factorof electrical insulating materials at power, audio and radio frequencies including meterwavelengths

IEC 60252-1-2001交流电动机的电容器.第1部分:总则.性能、试验和额定.安全要求.安装和操作指南

A.C. motor capacitors - Part 1: General; Performance, testing and rating; Safety requirements;Guide for installation and operation63P;A4

IEC 60254-1-1997 铅酸牵引蓄电池.第1部分:一般要求和试验方法Lead-acid traction batteries - Part 1: General requirements and methods of test27P;A4

IEC 60254-2 AMD 1-2000牵引用铅酸蓄电池.第2部分:电池的尺寸、接线柱及电池的

两极标记.修改件1

Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity oncells; Amendment 17P;A4

IEC 60255-1-0-1975 继电器.第1部分:有或无电气继电器Electrical relays. Part 1 : All-or-nothing electrical relays67P;A4

IEC 60255-11-1979继电器.第11部分:量度继电器直流辅助激励量的中断和交

流分量(波纹)

Electrical relays. Part 11 : Interruptions to and alternating component (ripple) in d.c. auxiliaryenergizing quantity of measuring relays16P;A4

IEC 60255-12-1980 继电器.第12部分:具有两个输入激励量的定向继电器和功

率继电器

Electrical relays. Part 12 : Directional relays and power relays with two input energizing quantities26P;A4

IEC 60255-13-1980 继电器.第13部分:偏压(比率)差动继电器Electrical relays. Part 13 : Biased (percentage) differential relays24P;A4

IEC 60255-14-1981 继电器.第14部分:继电器触点寿命试验.触点负载优选值Electrical relays. Part 14 : Endurance test for electrical relay contacts - Preferred values ofcontact loads

IEC 60255-15-1981 继电器.第15部分:继电器触点寿命试验.试验设备特性规范Electrical relays. Part 15 : Endurance tests for electrical relay contacts - Specification for thecharacteristics of test equipment13P;A4

IEC 60255-16-1982 继电器.第16部分:阻抗量度继电器Electrical relays. Part 16 : Impedance measuring relays27P;A4

IEC 60255-18-1982 继电器.第18部分:一般用途有或无继电器的尺寸Electrical relays. Part 18 : Dimensions for general purpose all-or-nothing relays21P;A4

（65） 351

IEC标准目录


开本页数

IEC 60255-21-1-1988继电器.第21部分:测量继电器和保护设备上的振动、冲击

、碰撞和地震试验.第1节:振动试验(正弦波)

Electrical relays; part 21: vibration, shock, bump and seismic tests on measuring relays andprotection equipment; section one: vibration tests (sinusoidal)23P;A4


、碰撞和地震试验.第2节:冲击和碰撞试验

Electrical relays; part 21: vibration, shock, bump and seismic tests on measuring relays andprotection equipment; section two: shock and bump tests29P;A4


、碰撞和地震试验.第3节:地震试验

Electrical relays; part 21: vibration, shock, bump and seismic tests on measuring relays andprotection equipment; section 3: seismic tests29P;A4

IEC 60255-22-1-1988电气继电器.第22部分:量度继电器和保护装置的电气骚扰

试验.1MHz猝发骚扰试验

Electrical relays. Part 22: Electrical disturbance tests for measuring relays and protectionequipment. 1 MHz burst disturbance tests

IEC 60255-22-2-1996继电器.第22部分:测量继电器和保护设备的电干扰试验.第2节:静电放射试验

Electrical relays - Part 22: Electrical disturbance tests for measuring relays and protectionequipment - Section 2: Electrostatic discharge tests31P;A4

IEC 60255-22-3-2000继电器.第22-3部分:测试继电器和保护设备的电干扰试验.第3节:辐射电磁场干扰试验

Electrical relays - Part 22-3: Electrical disturbance tests for measuring relays and protectionequipment; Radiated electromagnetic field disturbance tests21P;A4

IEC 60255-22-4-2002电气继电器.第22-4部分:量度继电器和保护装置的电气骚

扰试验.快速瞬变/猝发骚扰试验

Electrical relays - Part 22-4: Electrical disturbance tests for measuring relays and protectionequipment; Electrical fast transient/burst immunity test25P;A4

IEC 60255-22-5-2002继电器.第22-5部分:测量继电器和保护设备的电干扰试验.电流浪涌免疫性试验

Electrical relays - Part 22-5: Electrical disturbance tests for measuring relays and protectionequipment; Surge immunity test31P;A4

IEC 60255-22-6-2001电气继电器.第22-6部分:测量继电器和保护设备的电干扰

试验.抗射频场引起的馈电线感应干扰

Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protectionequipment; Immunity to conducted disturbances induced by radio frequency fields21P;A4

IEC 60255-23-1994 继电器.第23部分:触点性能Electrical relays - Part 23: Contact performance71P;A4

IEC 60255-24-2001电气继电器.第24部分:电力系统用瞬时数据交换

(COMTRADE)通用格式

Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for powersystems105P;A4

IEC 60255-25-2000电气继电器.第25部分:测量继电器和保护设备的电磁辐射

试验

Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protectionequipment25P;A4

IEC 60255-3-1989继电器.第3部分:非固定时限或固定时限的单输入激励量的

测量继电器

Electrical relays; part 3: single input energizing quantity measuring relays with dependent orindependent time19P;A4

IEC 60255-5-2000电气继电器.第5部分:测量继电器和保护设备的绝缘协调性.要求和试验

Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment;Requirements and tests61P;A4

（66） 351

IEC标准目录


开本页数

IEC 60255-6-1988 继电器.第6部分:测量继电器和保护装置Electrical relays; part 6: measuring relays and protection equipment37P;A4

IEC 60255-8-1990 继电器.第8部分:热敏继电器Electrical relays; part 8: thermal electrical relays33P;A4

IEC 60256-1967装有盖格-弥勒计数管或正比计数管或闪烁探测器的圆柱辐

射探头的外径

External diameters of cylindrical radiation probes containing Geiger-M乴ler or proportionalcounter tubes or scintillation detectors5P;A4

IEC 60258 AMD 1-1976 直接记录电气测量仪表及其附件.第1次修改 Direct acting recording electrical measuring instruments and their accessories

IEC 60258-1968 直接记录电气测量仪表及其附件Direct acting recording electrical measuring instruments and their accessories130P;A4

IEC 60261-1989 加压波导管及其组件的密封试验Sealing test for pressurized waveguide tubing and assemblies18P;A4

IEC 60262 AMD 1-1974 高压汞蒸汽灯镇流器.修改件1 Ballasts for high pressure mercury vapour lamps

IEC 60262 AMD 2-1976 高压汞蒸汽灯镇流器.修改件2 Ballasts for high pressure mercury vapour lamps

IEC 60262 AMD 3-1978 高压汞蒸汽灯镇流器.第3次修改 Ballasts for high pressure mercury vapour lamps

IEC 60262-1969 高压汞蒸汽灯镇流器Ballasts for high pressure mercury vapour lamps83P;A4

IEC 60263-1982 绘制频率特性和极座标图用的标度和尺寸Scales and sizes for plotting frequency characteristics and polar diagrams17P;A4

IEC 60264-1-1968 绕组线的封装.第1部分:圆绕组线线筒Packaging of winding wires. Part 1 : Containers for round winding wires8P;A4

IEC 60264-2-1-1989 绕组线的封装.第2部分:圆柱形供线盘.第1节:基本尺寸Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section one; basicdimensions

IEC 60264-2-2-1990绕组线的封装.第2部分:圆柱形供线盘.第2节:由热塑性材料

制成的可回收使用的片盘规范

Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section 2: specificationfor returnable spools made from thermoplastic material15P;A4

IEC 60264-2-3-1990绕组线的封装.第2部分:圆柱形供线盘.第3节:由热塑性材料

制成的不能回收使用的片盘规范

Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section 3: specificationfor non-returnable spools made from thermoplastic material15P;A4

IEC 60264-3-1-1999 绕组线的封装.第3-1部分:锥形供线盘.基本尺寸Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions11P;A4

IEC 60264-3-2-1999绕组线的封装.第3-2部分:锥型筒传递线轴.热塑材料制成的

可回收线轴规格

Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification forreturnable spools made from thermoplastic materials13P;A4

IEC 60264-3-3-1990绕组线的封装.第3部分:锥形供线盘.第3节:由热塑性材料制

成的不能回收使用的片盘规范

Packaging of winding wires; part 3: taper barrelled delivery spools; section 3: specification fornon-returnable spools made from thermoplastic material15P;A4

（67） 351

IEC标准目录


开本页数

IEC 60264-3-4-1999绕组线的封装.第3-4部分:锥型筒传递线轴.锥型筒传递线轴

容器的基本尺寸

Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions ofcontainers for taper barrelled delivery spools9P;A4

IEC 60264-3-5-1999绕组线的封装.第3-5部分:锥型筒传递线轴.热塑材料制成的

传递线轴容器规格

Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spoolcontainers made from thermoplastic material13P;A4

IEC 60264-4-1-1997绕组线的封装.第4-1部分:试验方法.由热塑性塑料制成的供

线盘

Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplasticmaterials19P;A4

IEC 60264-4-2-1992绕组线的封装.第4部分:试验方法.第2节:热塑性材料制成的

锥形供线盘用容器

Packaging of winding wires; part 4: methods of test; section 2: containers made fromthermoplastic material for taper barrelled delivery spools15P;A4

IEC 60264-5-1-1997绕组线的包装.第5-1部分:带锥形法兰的圆柱形供线盘.基本

尺寸

Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges -Basic dimensions9P;A4

IEC 60264-5-2-2001绕组线的包装.第5-2部分:带锥形法兰的圆柱形供线盘.热塑

性材料制成的可回收的供线盘的规范

Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges;Specification for returnable spools made from thermoplastic material13P;A4

IEC 60265-1-1998 高压开关.第1部分:额定电压1KV以上至52KV以下高压开关High-voltage switches - Part 1: Switches for rated voltages above 1 kV and less than 52 kV103P;A4

IEC 60265-2 AMD 1-1994 高压开关.第2部分:额定电压52KV及以下高压开关.修改件1High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above;Amendment 15P;A4

IEC 60265-2 AMD 2-1998高压开关.第2部分:额定电压为52KV及其以上的高压开关.补充件2

High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above;Amendment 23P;A4

IEC 60265-2-1988 高压开关.第2部分:额定电压为52KV及其以上的高压开关High-voltage switches; part 2: high-voltage switches for rated voltage of 52 kV and above92P;A4

IEC 60268-1 AMD 1-1988 音响系统设备.第1部分:总则.第1次修改 Sound system equipment. Part 1: General

IEC 60268-1 AMD 2-1988 音响系统设备.第1部分:总则.第2次修改 Sound system equipment. Part 1: General

IEC 60268-10-1991 音响系统设备.第10部分:峰值音量电平表Sound system equipment; part 10: peak programme level meters63P;A4

IEC 60268-11 AMD 1-1989音响系统设备.第11部分:音响系统部件互连用圆形连接器

的应用.第1次修改

Sound system equipment; part 11: application of connectors for the interconnection of soundsystem components; amendment 1 to IEC 60268-11:19875P;A4

IEC 60268-11 AMD 2-1991 第2次修改Sound system equipment; part 11: application of connectors for the interconnection of soundsystem components; amendment 29P;A4

（68） 351

IEC标准目录


开本页数

IEC 60268-11-1987音响系统设备.第11部分:音响系统部件互连用连接器的应

用

Sound system equipment. Part 11 : Application of connectors for the interconnection of soundsystem components19P;A4

IEC 60268-1-1985 音响系统设备.第1部分:总则 Sound system equipment. Part 1 : General

IEC 60268-12 AMD 1-1991音响系统设备.第12部分:广播用和类似用途连接器的应用.第1次修改

Sound system equipment; part 12: application of connectors for broadcast and similar use;amendment 13P;A4

IEC 60268-12 AMD 2-1994音响系统设备.第12部分:广播用和类似用途连接器的应用.第2次修改

Sound-system equipment - Part 12: Application of connectors for broadcast and similar use;Amendment 29P;A4

IEC 60268-12-1987 音响系统设备.第12部分:广播和类似用途连接器的应用 Sound system equipment. Part 12 : Application of connectors for broadcast and similar use

IEC 60268-14-1980音响系统设备.第14部分:圆形和椭圆形扬声器.外框直径和

安装尺寸

Sound system equipment. Part 14 : Circular and elliptical loudspeakers; outer frame diametersand mounting dimensions13P;A4

IEC 60268-16-1998音响系统设备.第16部分:用语音传输系数测定语音清晰度

的目标额定功率

Sound system equipment - Part 16: Objective rating of speech intelligibility by speechtransmission index51P;A4

IEC 60268-17-1990 音响系统设备.第17部分:标准音量指示器Sound system equipment; part 17: standard volume indicators21P;A4

IEC 60268-2 AMD 1-1991音响系统设备.第2部分:一般术语释义和计算方法.第1次修

改

Sound system equipment; part 2: explanation of general terms and calculation methods;amendment 15P;A4

IEC 60268-2-1987 音响系统设备.第2部分:一般术语释义和计算方法Sound system equipment. Part 2 : Explanation of general terms and calculation methods31P;A4

IEC 60268-3-2000 音响系统设备.第3部分:放大器 Sound system equipment - Part 3: Amplifiers

IEC 60268-4-1997 音响系统设备.第4部分:传声器Sound system equipment - Part 4: Microphones85P;A4

IEC 60268-5 AMD 1-1993 第1次修改Sound-system equipment; part 5: loudspeakers; amendment 113P;A4

IEC 60268-5 AMD 2-1996 音响系统设备.第5部分:扬声器.补充件2Sound-system equipment - Part 5: Loudspeakers; Amendment 213P;A4

IEC 60268-5-1989 音响系统设备.第5部分:扬声器Sound system equipment; part 5: loudspeakers69P;A4

IEC 60268-6-1971 音响系统设备.第6部分:辅助无源元件Sound system equipment. Part 6 : Auxiliary passive elements69P;A4

IEC 60268-7-1996 音响系统设备.第7部分:头戴受话器及耳机Sound system equipment - Part 7: Headphones and earphones65P;A4

IEC 60268-8-1973 音响系统设备.第8部分:自动增益控制器件Sound system equipment. Part 8 : Automatic gain control devices26P;A4

（69） 351

IEC标准目录


开本页数

IEC 60268-9-1977 音响系统设备.第9部分:人工混响、延时和频移设备Sound system equipment. Part 9 : Artificial reverberation, time delay and frequency shiftequipment

IEC 60269-1-1998 低压熔断器.第1部分:一般要求Low-voltage fuses - Part 1: General requirements137P;A4

IEC 60269-2 AMD 1-1995低压熔断器.第2部分:专职人员使用的熔断器(主要是工业用

熔断器)的补充要求.补充件1

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application); Amendment 13P;A4

IEC 60269-2 AMD 2-2001低压熔断器.第2部分:指定人员使用的熔断器(主要是工业用

熔断器)的补充要求.修改件2

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application); Amendment 25P;A4

IEC 60269-2-1 AMD 1-1999低压熔断器.第2-1部分:由规定人员使用的熔断器的补充要

求(主要用于工业的熔断器).第I-V节:标准熔断器种类的样

品.修改件1

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorizedpersons (fuses mainly for industrial application) - Sections I to V: Examples of types ofstandardized fuses; Amendment 119P;A4

IEC 60269-2-1 AMD 2-2002低压熔断器.第2-1部分:指定人员使用的熔断器(主要工业用

熔断器)补充要求.第1-4节:标准化熔断器类型实例.修改件2

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorizedpersons (fuses mainly for industrial application); Sections I to VI: Examples of types ofstandardized fuses; Amendment 281P;A4

IEC 60269-2-1 Edition 3.1-2000低压熔断器.第2-1部分:专职人员使用的熔断器(主要是工业

用熔断器)的补充要求.第1-5节:标准熔断器类型举例

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorizedpersons (fuses mainly for industrial application) - Sections I to V: Examples of types ofstandardized fuses

IEC 60269-2-1-1998低压熔断器.第2-1部分:指定人员使用的熔断器(主要用于工

业的熔断器)的补充要求.第I-V节:标准化熔断器类型实例

Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorizedpersons (fuses mainly for industrial application); Sections I to V: Examples of types ofstandardized fuses

IEC 60269-2-1986 低压熔断器.第2部分:专职人员使用的熔断器的补充要求 Low-voltage fuses. Part 2 : Supplementary requirements for fuses for use by authorized persons

IEC 60269-3-1 AMD 1-1995低压熔断器.第3-1部分:对不熟练人员使用的熔断器(主要家

用和类似用途的熔断器)补充要求.第Ⅰ-Ⅳ节.修改件1

Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons(fuses mainly for household and similar applications) - Sections I to IV; Amendment 121P;A4

IEC 60269-3-1 AMD 2-2001低压熔断器.第3-1部分:对不熟练人员使用的熔断器(主要家

用和类似用途的熔断器)补充要求(第I-IV节).修改件2

Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons(fuses mainly for household and similar applications); Sections I to IV; Amendment 233P;A4

IEC 60269-3-1 Edition 1.2-2001低压熔断器.第3-1部分:非专业人员使用的熔断器(主要是家

用和类似用途的熔断器)的补充要求.第Ⅰ-Ⅳ节

Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons(fuses mainly for household and similar applications) - Sections I to IV260P;A4

IEC 60269-3-1-1994低压熔断器.第3-1部分:非熟练人员使用的熔断器(主要家用

和类似用途的熔断器)补充要求--第I-IV节

Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons(fuses mainly for household and similar applications) - Sections I to IV192P;A4

IEC 60269-3-1987低压熔断器.第3部分:非熟练人员使用的熔断器(主要是家用

和类似用途的熔断器)的补充要求

Low-voltage fuses.. Part 3: Supplementary requirements for fuses for use by unskilled persons(Fuses mainly for household and similar applications)

（70） 351

IEC标准目录


开本页数

IEC 60269-4 AMD 1-1995低压熔断器.第4部分:对半导体器件保护用熔断体的补充要

求.补充件1

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection ofsemiconductor devices; Amendment 15P;A4

IEC 60269-4 AMD 2-2002低压熔断器.第4部分:半导体设备保护用熔断体的补充要求.修改件2

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection ofsemiconductor devices; Amendment 219P;A4

IEC 60269-4-1-2002低压熔断器.第4-1部分:保护半导体器件用熔断体的补充要

求.第1-3节:标准化熔断体的类型实例

Low-voltage fuses - Part 4-1: Supplementary requirements for fuse-links for the protection ofsemiconductor devices; Sections I to III: Examples of types of standardized fuse-links33P;A4

IEC 60269-4-1986低压熔断器.第4部分:对半导体器件保护用熔断体的补充要

求

Low-voltage fuses. Part 4 : Supplementary requirements for fuse links for the protection ofsemiconductor devices55P;A4

IEC 60270-2000 高电压试验技术.部分放电测量High-voltage test techniques - Partial discharge measurements99P;A4

IEC 60273-1990标称电压高于1000V以上系统用户内户外支柱绝缘子的特

性

Charact俽istics of indoor and outdoor post insulators for systems with nominal voltages greatherthan 1000 V52P;A4

IEC 60276 AMD 1-1987 碳刷,刷握和滑环的名称和定义 Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings

IEC 60276-1968 碳刷、刷握、换向器和滑环的定义和名称Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings35P;A4

IEC 60282-1-2002 高压熔断器.第1部分:限流熔断器High-voltage fuses - Part 1: Current-limiting fuses159P;A4

IEC 60282-2 AMD 1-1997 高压熔断器.第2部分:排气熔断器.修订件1High-voltage fuses - Part 2: Expulsion fuses; Amendment 13P;A4

IEC 60282-2 Edition 2.1-1997 高压熔断器.第2部分:喷射式熔断器High-voltage fuses - Part 2: Expulsion fuses126P;A4

IEC 60282-2-1995 高压熔断器.第2部分:排气式熔断器High-voltage fuses - Part 2: Expulsion fuses115P;A4

IEC 60282-3-1976高压熔断器.第3部分:试验限流熔断器和排气式及类似型式

熔断器的短路功率因数的测定

High-voltage fuses. Part 3 : Determination of short-circuit power factor for testing current-limitingfuses and expulsion and similar fuses8P;A4

IEC 60285 AMD 1-1995碱性二次电池和蓄电池组.圆柱形密封可充电镍铬单节电

池.修改件1

Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable singlecells: Amendment 15P;A4

IEC 60285 AMD 2-1998碱性二次电池和蓄电池组.圆柱形密封可充电镍铬单节电

池.修改件2

Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable singlecells; Amendment 23P;A4

IEC 60285 Edition 3.2-1999 碱性充电电池和电池组.密封式圆柱形镍镉可充电单电池Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable singlecells

（71） 351

IEC标准目录


开本页数

IEC 60285-1993 碱性二次电池和蓄电池组.圆柱形密封可充电镍镉单节电池Alkaline secondary cells and batteries; sealed nickel-cadmium cylindrical rechargeable singlecells

IEC 60286-1-1997自动装配用元件的包装.第1部分:具有轴向引线的元件在连

续编带上的带式包装

Packaging of components for automatic handling - Part 1: Tape packaging of components withaxial leads on continuous tapes17P;A4

IEC 60286-2 AMD 1-2002自动装配用元件的包装.第2部分:具有单向引线的元件在连

续编带上的带式包装.修改件1

Packaging of components for automatic handling - Part 2: Tape packaging of components withunidirectional leads on continuous tapes; Amendment 13P;A4

IEC 60286-2 Edition 2.1-2003自动装配元件的封装.第2部分:具有单向引线的元件在连续

带上的带式封装

Packaging of components for automatic handling - Part 2: Tape packaging of components withunidirectional leads on continuous tapes36P;A4

IEC 60286-2-1997元件自动封装.第2部分:具有单向引线的元件在连续带上的

带式封装

Packaging of components for automatic handling - Part 2: Tape packaging of components withunidirectional leads on continuous tapes27P;A4

IEC 60286-3-1997 元件自动封装.第3部分:表面安装的元件在连续带上的封装Packaging of components for automatic handling - Part 3: Packaging of surface mountcomponents on continuous tapes37P;A4

IEC 60286-4-1997自动控制用元件的封装.第4部分:E和G型包装件中密封电

子元件用的粘着料斗

Packaging of components for automatic handling - Part 4: Stick magazines for electroniccomponents encapsulated in packages of form E and G23P;A4

IEC 60286-5-1995 自动装配用元件的包装.第5部分:矩阵式料盘Packaging of components for automatic handling - Part 5: Matrix trays25P;A4

IEC 60286-6-1998 自动装卸组件的包装.第6部分:表面安装组件的批量包装Packaging of components for automatic handling - Part 6: Bulk case packaging for surfacemounting components19P;A4

IEC 60287-1-1 AMD 1-1995电缆.电流强度的计算.第1部分:电流强度因素(100%负载系

数)和电损耗计算.第1节:总则.第1次修改

Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% loadfactor) and calculation of losses - Section 1: General; Amendment 11P;A4

IEC 60287-1-1 AMD 2-2001电缆.额定电流的计算.第1-1部分:额定电流因素(100%负载

系数)和电损耗计算.总则.修改件2

Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% loadfactor) and calculation of losses; General; Amendment 29P;A4

IEC 60287-1-1 Edition 1.2-2001电缆.额定电流的计算.第1-1部分:额定电流方程(100%负载

系数)和电损耗计算.总则

Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100% loadfactor) and calculation of losses; General67P;A4

IEC 60287-1-1-1994电缆.额定电流的计算.第1部分:额定电流方程式(负荷率

100%)和损失率的计算.第1节:总则

Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% loadfactor) and calculation of losses; section 1: General65P;A4

IEC 60287-1-2-1993电缆.额定电流的计算.第1部分:额定电流方程式(负荷率

100%)和损失率的计算.第2节:在平面结构中双电路铅包涡

流损失率的计算

Electric cables; calculation of the current rating; part 1: current rating equations (100% loadfactor) and calculation of losses; section 2: sheath eddy current loss factors for two circuits in flatformation

（72） 351

IEC标准目录


开本页数

IEC 60287-1-3-2002电缆.额定电流的计算.第1-3部分:额定电流方程式(负荷率

100%)和损失率的计算.并联单心电缆间电流共享和循环电

流损失率的计算

Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % loadfactor) and calculation of losses; Current sharing between parallel single-core cables andcalculation of circulating current losses39P;A4

IEC 60287-2-1 AMD 1-2001 电缆.额定电流的计算.第2-1部分:热阻.热阻计算.修改件1Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance; Calculation ofthermal resistance; Amendment 15P;A4

IEC 60287-2-1 Edition 1.1-2001 电缆.额定电流的计算.第2-1部分:热阻.第1节:热阻的计算Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance; Calculation ofthermal resistance79P;A4

IEC 60287-2-1-1994电缆.额定电流的计算.第2部分:热绝缘电阻.第1节:热绝缘电

阻计算

Electric cables - Calculation of the current rating - Part 2: Thermal resistance; section 1:Calculation of thermal resistance65P;A4

IEC 60287-2-2-1995电缆.额定电流的计算.第2部分:热绝缘电阻.第2节:室外避免

阳光照射的电缆组用计算简化系数的方法

Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: Amethod for calculating reduction factors for groups of cables in free air, protected from solarradiation

IEC 60287-3-1 AMD 1-1999电缆.额定电流的计算.第3-1部分:操作条件部分.参考操作

条件和电缆类型的选择.补充件1

Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions -Reference operating conditions and selection of cable type; Amendment 13P;A4

IEC 60287-3-1 Edition 1.1-1999电缆.电流额定的计算.第3部分:操作条件的选择.参考操作

条件和电缆类型的选择

Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions -Reference operating conditions and selection of cable type31P;A4

IEC 60287-3-1-1995电缆.额定电流的计算.第3部分:操作条件部分.第1节:标准操

作条件和电缆型号选择

Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions -Section 1: Reference operating conditions and selection of cable type35P;A4

IEC 60287-3-2 AMD 1-1996电缆.额定电流的计算.第3部分:操作条件的分类.第2节:电力

电缆尺寸的经济优选法.修改件1

Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions -Section 2: Economic optimization of power cable size; Amendment 13P;A4

IEC 60287-3-2-1995电缆.额定电流的计算.第3部分:操作条件的分类.第2节:电力

电缆尺寸的经济优选法

Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions -Section 2: Economic optimization of power cable size59P;A4

IEC 60289-1988 电抗器 Reactors

IEC 60294-1969 具有两个轴向引出端的圆柱形元件尺寸的测量Measurement of the dimensions of a cylindrical component having two axial terminations11P;A4

IEC 60296 AMD 1-1986 变压器和开关设备未使用过的矿物绝缘油规范.第1次修改 Specification for unused mineral insulating oils for transformers and switchgear

IEC 60296-1982 变压器和开关设备用未使用过的矿物绝缘油规范Specification for unused mineral insulating oils for transformers and switchgear21P;A4

IEC 60297-1-1986 482.6mm(19.in)系列机械结构件的尺寸.第1部分:面板和机

架

Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1 : Panels and racks7P;A4

（73） 351

IEC标准目录


开本页数

IEC 60297-2-1982482.6mm(19.in)系列机械结构件的尺寸.第2部分:机箱以及

机架结构间距

Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 2 : Cabinets andpitches of rack structures9P;A4

IEC 60297-3 AMD 1-1992 第1次修改Dimensions of mechanical structures of the 482,6 mm (19 in) series; part 3: subracks andassociated plug-in units; amendment 121P;A4

IEC 60297-3-1984482.6mm(19.in)系列机械结构件的尺寸.第3部分:分机架及

相关插件

Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 3 : Subracks andassociated plug-in units31P;A4

IEC 60297-4 AMD 1-1999电气设备机械结构件.482,6mm(19in)系列机械结构尺寸.第4部分:辅助框架和相关插头元件.附加尺寸.补充件1

Mechanical structures for electronical equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions;Amendment 15P;A4

IEC 60297-4 Edition 1.1-1999电子设备机械结构件.482,6mm(19in)系列机械结构尺寸.第4部分:辅助框架和相关插头元件.附加尺寸

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions31P;A4

IEC 60297-4-1995电气设备的机械结构.482.6mm(19.in)系列机械结构件的尺

寸.第4部分:分机架及相关插件.附加尺寸

Mechanical structures for electronical equipment - Dimensions of mechanical structures of the482,6 mm(19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions31P;A4

IEC 60297-5-100-2001电子设备的机械结构.482,6mm(19in)系列的机械结构的尺

寸.第5-100部分:机架和相关插件.设计总览

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units; Design overview11P;A4


寸.第5-101部分:注射和抽提器柄

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in units; Injector/extractorhandle


寸.第5-102部分:电磁屏蔽设备

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 5-102: Subracks and associated plug-in units; Electromagneticshielding provision11P;A4


寸.第5-103部分:静电放电保护

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in units; Electrostaticdischarge protection11P;A4


寸.第5-104部分:支架和相关插件.键控

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in units; Keying15P;A4


寸.第5-105部分:辅助框架和相关插件.定位销和/或接地销

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units; Alignment and/orearth pin

（74） 351

IEC标准目录


开本页数


寸.第5-107部分:支架和相关插件.后背固定的插件

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units; Rear-mounted plug-in units

IEC 60298 AMD 1-1994额定电压大于1KV,小于等于52KV交流金属开关和控制开

关

A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to andincluding 52 kV; Amendment 119P;A4

IEC 60298-1990额定电压1KV以上至52KV(含)交流金属外壳开关设备和控

制设备

A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to andincluding 52 kV111P;A4

IEC 60299-1994 家用电热毯.特性的测量方法Household electric blankets; methods for measuring performance21P;A4

IEC 60300-1-1993 可信性管理.第1部分:可信性方案管理Dependability management; part 1: dependability programme management21P;A4

IEC 60300-2-1995 可信性管理.第2部分:可信性大纲要素和任务Dependability management - Part 2: Dependability programme elements and tasks73P;A4

IEC 60300-3-10-2001 可靠性管理.第3-10部分:应用指南.维修性Dependability management - Part 3-10: Application guide; Maintainability67P;A4

IEC 60300-3-11-1999 可信性管理.第3-11部分:应用指南.以可靠性为中心的维修Dependability management - Part 3-11: Application guide - Reliability centred maintenance107P;A4

IEC 60300-3-1-2003可信性管理.第3-1部分:应用指南.可信性技术分析:方法指

南

Dependability management - Part 3-1: Application guide; Analysis techniques for dependability;Guide on methodology66P;A4

IEC 60300-3-12-2001 可信性管理.第3-12部分:应用指南.综合后勤保障Dependability management - Part 3-12: Application guide; Integrated logistic support93P;A4

IEC 60300-3-2-1993 可靠性管理.第3部分:应用指南.第2节:可靠性数据的收集Dependability management; part 3: application guide; section 2: collection of dependability datafrom the field29P;A4

IEC 60300-3-3-1996 可信性管理.第3部分:应用指南.第3节:寿命周期费用分析Dependability management - Part 3: Application guide - Section 3: Life cycle costing47P;A4

IEC 60300-3-4-1996 可靠性管理.第3部分:应用指南.第4节:可靠性要求规范指南Dependability management - Part 3: Application guide - Section 4: Guide to the specification ofdependability requirements35P;A4

IEC 60300-3-5-2001可靠性管理.第3-5部分:应用指南.可靠性试验条件和统计试

验原则

Dependability management - Part 3-5: Application guide; Reliability test conditions and statisticaltest principles139P;A4

IEC 60300-3-6-1997 可靠性管理.第3部分:应用指南.第6节:软件样品的可靠性Dependability management - Part 3: Application guide - Section 6: Software aspects ofdependability

IEC 60300-3-7-1999 可靠性管理.第3-7部分:应用指南.电子硬件可靠性压力扫描Dependability management - Part 3-7: Application guide - Reliability stress screening ofelectronic hardware69P;A4

（75） 351

IEC标准目录


开本页数

IEC 60300-3-9-1995 可靠性管理.第3部分:应用指南.第9节:技术设备的磁盘分析Dependability management - Part 3: Application guide - Section 9: Risk analysis of technologicalsystems67P;A4

IEC 60301 AMD 1-1972 电容器和电阻器引出线端的优先直径.第1次修改 Preferred diameters of wire terminations of capacitors and resistors

IEC 60301-1971 电容器和电阻器引出线端的优先直径Preferred diameters of wire terminations of capacitors and resistors8P;A4

IEC 60304-1982 低频电缆和电线用绝缘的标准颜色Standard colours for insulation for low-frequency cables and wires7P;A4

IEC 60305-1995标称电压1000V以上架空线用绝缘子.交流设备用陶瓷或玻

璃绝缘子.盘形和针形悬式绝缘子串元件的特性

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulatorunits for a.c. systems - Characteristics of insulator units of the cap and pin type11P;A4

IEC 60306-1-1969 光敏器件的测量.第1部分:基本介绍Measurement of photosensitive devices. Part 1 : Basic recommendations27P;A4

IEC 60306-2-1969 光敏器件的测量.第2部分:光电管的测量方法Measurement of photosensitive devices. Part 2 : Methods of measurement of phototubes9P;A4

IEC 60306-3-1970光敏器件的测量.第3部分:用于可见光谱的光电导管的测量

方法

Measurement of photosensitive devices. Part 3 : Methods of measurement of photoconductivecells for use in the visible spectrum15P;A4

IEC 60306-4-1971 光敏器件的测量.第4部分:光电倍增管的测量方法Measurement of photosensitive devices. Part 4 : Methods of measurement of photo multipliers35P;A4

IEC 60308-1970 水轮机调速系统试验国际规程International code for testing of speed governing systems for hydraulic turbines95P;A4

IEC 60309-1-1999 工业用插头-插座和耦合器.第1部分:通用要求Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements153P;A4

IEC 60309-2-1999工业用插头-插座和耦合器.第2部分:针头和接触管附件的尺

寸可转换性要求

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeabilityrequirements for pin and contact-tube accessories95P;A4

IEC 60310-1991 牵引变压器和电抗器Traction transformers and inductors65P;A4

IEC 60311-2002 家用或类似用途的电熨斗.性能测量方法Electric irons for household or similar use - Methods for measuring performance49P;A4

IEC 60312 AMD 1-2000 家用真空吸尘器.性能的测量方法.修改件1Vacuum cleaners for household use - Methods of measuring the performance; Amendment 119P;A4

IEC 60313-2002 核实验室仪器用同轴连接器Coaxial connectors used in nuclear laboratory instrumentation11P;A4

IEC 60314 AMD 1-1979 石英晶体谐振器的温度控制装置.第1次修改 Temperature control devices for quartz crystal units

IEC 60314-1970 石英晶体谐振器的温度控制装置Temperature control devices for quartz crystal units51P;A4

IEC 60314A-1971 第1次补充Temperature control devices for quartz crystal units.35P;A4

（76） 351

IEC标准目录


开本页数

IEC 60315-1-1988各种发射类别的无线电接收机的测量方法.第1部分:测量(包括声频测量)的一般条件和方法

Methods of measurement on radio receivers for various classes of emission; part 1: generalconsiderations and methods of measurement, including audio-frequency measurements86P;A4

IEC 60315-3 AMD 1-1999各种发射类别的无线电接收机的测量方法.第3部分:调幅广

播发射接收机.补充件1

Methods of measurement on radio receivers for various classes of emission - Part 3: Receiversfor amplitude-modulated sound-broadcasting emissions; Amendment 131P;A4

IEC 60315-3 Edition 2.1-1999各种发射类别的无线电接收机的测量方法. 第3部分:放大调

制声音播送接收器.

Methods of measurement on radio receivers for various classes of emission - Part 3: Receiversfor amplitude-modulated sound-broadcasting emissions87P;A4

IEC 60315-3-1989各种发射类别的无线电接收机的测量方法.第3部分:调幅广

播发射接收机

Methods of measurement on radio receivers for various classes of emission; part 3: receivers foramplitude-modulated sound-broadcasting emissions7P;A4

IEC 60315-4-1997各种发射类别的无线电接收机的测量方法.第4部分:调频声

音广播接收机的射频测量

Methods of measurement on radio receivers for various classes of emission - Part 4: Receiversfor frequency-modulated sound broadcasting emissions147P;A4

IEC 60315-6-1991各种发射类别的无线电接收机的测量方法.第6部分:一般通

信接收机

Methods of measurement on radio receivers for various classes of emission; part 6: generalpurpose communication receivers51P;A4

IEC 60315-9-1996各种发射类别的无线电接收机的测量方法.第9部分:无线电

数据系统接收特性测试

Methods of measurement on radio receivers for various classes of emission - Part 9:Measurement of the characteristics relevant to radio data system (RDS) reception29P;A4

IEC 60317 AMD 1-1997

特种绕组线规范.IEC 60317系列标准以下部分2-90,3-90,4-90,10-90,12-90,14-90,15-90,16-90,17-90,18-90,19-90,20-90,21-90,22-90,23-90,24-90,26-90,28-90,29-90,30-90,35-90,36-90,37-90,38-90的修订件1

Specifications for particular types of winding wires; Amendment 1 to the following parts of IEC60317 series: Part 2 (1990), Part 3 (1990), Part 4 (1990), Part 10 (1978), Part 12 (1990), Part 14(1990), Part 15 (1990), Part 16 (1990), Part 17 (1990), Part 18 (1990), Part 19 (1990), Part 20(1990), Part 21 (1990), Part 22 (1990), Part 23 (1990), Part 24 (1990), Part 26 (1990), Part 28(1990), Part 29 (1990), Part 30 (1990), Part 35 (1990), Pa3P;A4

IEC 60317 AMD 2-1997特种绕组线规范.IEC60317系列以下部分修订件2:1-90,7-90,8-90,11-90,13-93,25-90

Specifications for particular types of winding wires; Amendment 2 to the following parts of IEC60317 series: Part 1 (1990), Part 7 (1990), Part 8 (1990), Part 11 (1990), Part 13 (1990), Part 25(1990)

IEC 60317-0-1 AMD 1-1999 特种绕组线规范.第0-1部分:一般要求.漆包圆铜线.修改件1Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelledround copper wire; Amendment 13P;A4

IEC 60317-0-1 Edition 2.1-2000 绕组线特殊类型规范.第0-1部分:一般要求.瓷漆圆形铜线Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelledround copper wire53P;A4

IEC 60317-0-2 AMD 1-1999 特种绕组线规范.第0-2部分:一般要求.漆包扁铜线.修改件1Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelledrectangular copper wire; Amendment 13P;A4

（77） 351

IEC标准目录


开本页数

IEC 60317-0-2 Edition 2.1-2000 绕组线特殊类型规范.第0-2部分:一般要求.瓷漆矩形铜线Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelledrectangular copper wire45P;A4

IEC 60317-0-3 AMD 1-1999特种绕组线规范.第0部分:一般要求.第3节:漆包圆铝线.修改

件1

Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelledround aluminium wire; Amendment 13P;A4

IEC 60317-0-3 Edition 2.1-2000 绕组线特殊类型规范.第0-3部分:一般要求.瓷漆圆形铝线Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelledround aluminium wire39P;A4

IEC 60317-0-4 AMD 1-1999特种绕组线规范.第0-4部分:一般要求.玻璃纤维绕组树脂或

清漆浸渍裸铜线或漆包扁铜线.修改件1

Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibrewound resin or varnish impregnated, bare or enamelled rectangular copper wire; Amendment 13P;A4

IEC 60317-0-4 Edition 2.1-2000绕组线特殊类型规范.第0-4部分:一般要求.玻璃纤维缠绕的

树脂或清漆浸渍的,裸露或瓷漆的矩形铜线

Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibrewound resin or varnish impregnated, bare or enamelled rectangular copper wire43P;A4

IEC 60317-0-5 AMD 1-1997特种绕组线规范.第0部分:一般要求.第5节:带玻璃纤维编织

层的、裸的或漆包扁铜线.修改件1

Specifications for particular types of winding wires - Part 0: General requirements - Section 5:Glass-fibre braided, bare or enamelled rectangular copper wire; Amendment 15P;A4

IEC 60317-0-5 AMD 2-1999特种绕组线规范.第0-5部分:一般要求.带玻璃纤维编织层的

、裸的或漆包扁铜线.修改件2

Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibrebraided, bare or enamelled rectangular copper wire; Amendment 23P;A4

IEC 60317-0-5 Edition 1.2-2000绕组线特殊类型规范.第0-5部分:一般要求.玻璃纤维编织的

树脂或清漆浸渍的,裸露或瓷漆的矩形铜线

Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibrebraided resin or varnish impregnated, bare or enamelled rectangular copper wire41P;A4

IEC 60317-0-6-2001特种绕组线规范.第0-6部分:一般要求.玻璃纤维绕组树脂的

或清漆浸渍的、裸的或漆包圆铜线

Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibrewound resin or varnish impregnated, bare or enamelled round copper wire35P;A4

IEC 60317-1 AMD 1-1997特种绕组线规范.第1部分:聚乙烯醇乙醛漆包圆铜绕组

线.105级.修改件1

Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled roundcopper wire, class 105; Amendment 13P;A4

IEC 60317-1 Edition 3.2-1997特种绕组线规范.第1部分:聚乙烯醇缩乙醛漆包圆铜线.105级

Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled roundcopper wire, class 10528P;A4

IEC 60317-11-1999特种绕组线规范.第11部分:带丝包可焊接的聚氨基甲酸乙

酯漆包圆铜绕组线,130级

Specifications for particular types of winding wires - Part 11: Bunched solderable polyurethaneenamelled round copper wires, class 130, with silk covering39P;A4

IEC 60317-1-1990特种绕组线规范.第1部分:聚乙烯醇乙醛漆包圆铜绕组

线.105级

Specifications for particular types of winding wires; part 1: polyvinyl acetal enamelled roundcopper wire, class 10515P;A4

（78） 351

IEC标准目录


开本页数

IEC 60317-12-1990特种绕组线规范.第12部分:聚乙烯醇乙醛漆包圆铜绕组

线,120级

Specifications for particular types of winding wires; part 12: polyvinyl acetal enamelled roundcopper wire, class 12015P;A4

IEC 60317-13 AMD 1-1997特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆聚酯或聚

酰胺酯漆包的圆铜绕组线,200级.修改件1

Specifications for particular types of winding wires - Part 13: Polyester or polyesterimideovercoated with polyamide-imide enamelled round copper wire, class 200; Amendment 13P;A4

IEC 60317-13 Edition 2.2-1997特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆的聚酯或

聚酯酰亚胺漆包的圆铜线.200级

Specifications for particular types of winding wires - Part 13: Polyester or polyesterimideovercoated with polyamide-imide enamelled round copper wire, class 20030P;A4

IEC 60317-13-1990特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆聚酯或聚

酰胺酯漆包的圆铜绕组线,200级

Specifications for particular types of winding wires; part 13: polyester or polyesterimideovercoated with polyamide-imide enamelled round copper wire, class 20017P;A4

IEC 60317-14-1990特种绕组线规范.第14部分:聚乙烯醇乙醛漆包圆铝绕组

线,105级

Specifications for particular types of winding wires; part 14: polyvinyl acetal enamelled roundaluminium wire, class 10515P;A4

IEC 60317-15-1990特种绕组线规范.第15部分:聚酰胺酯漆包圆铝绕组线,180级

Specifications for particular types of winding wires; part 15: polyesterimide enamelled roundaluminium wire, class 18015P;A4

IEC 60317-16-1990 特种绕组线规范.第16部分:聚酯漆包扁铜绕组线,155级Specifications for particular types of winding wires; part 16: polyester enamelled rectangularcopper wire, class 15513P;A4

IEC 60317-17-1990特种绕组线规范.第17部分:聚乙烯醇乙醛漆包扁铜绕组

线,105级

Specifications for particular types of winding wires; part 17: polyvinyl acetal enamelledrectangular copper wire, class 10515P;A4

IEC 60317-18-1990特种绕组线规范.第18部分:聚乙烯醇乙醛漆包扁铜绕组

线,120级

Specifications for particular types of winding wires; part 18: polyvinyl acetal enamelledrectangular copper wire, class 12015P;A4

IEC 60317-19 AMD 2-1999特种绕组线规范.第19部分:涂覆聚酰胺的可焊接聚氨基甲

酸乙酯漆包圆铜绕组线,130级.修改件2

Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelledround copper wire overcoated with polyamide, class 130; Amendment 23P;A4

IEC 60317-19 Edition 2.2-2000绕组线特殊类型规范.第19部分:130级聚酰氨包覆的可焊聚

氨酯瓷漆圆形铜线

Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelledround copper wire, overcoated with polyamide, class 13019P;A4

IEC 60317-19-1990特种绕组线规范.第19部分:涂覆聚酰胺的可焊接聚氨基甲

酸乙酯漆包圆铜绕组线,130级

Specifications for particular types of winding wires; part 19: solderable polyurethane enamelledround copper wire overcoated with polyamide, class 13019P;A4

IEC 60317-2 AMD 2-1999特种绕组线规范.第2部分:带粘合层的可焊接的聚氨基甲酸

乙酯漆包圆铜绕组线,130级.修改件2

Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelledround copper wire, class 130, with a bonding layer; Amendment 27P;A4

（79） 351

IEC标准目录


开本页数

IEC 60317-2 Edition 3.2-2000绕组线特殊类型规范.第2部分:130级带粘合层的可焊聚氨

酯瓷漆圆形铜线

Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelledround copper wire, class 130, with a bonding layer19P;A4

IEC 60317-20 AMD 2-1999特种绕组线规范.第20部分:可焊接的聚氨基甲酸乙酯漆包

圆铜绕组线,155级.修改件2

Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelledround copper wire, class 155; Amendment 23P;A4

IEC 60317-20 Edition 2.2-2000绕组线特殊类型规范.第20部分:155级可焊聚氨酯瓷漆圆形

铜线

Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelledround copper wire, class 15515P;A4

IEC 60317-20-1990特种绕组线规范.第20部分:可焊接的聚氨基甲酸乙酯漆包

圆铜绕组线,155级

Specifications for particular types of winding wires; part 20: solderable polyurethane enamelledround copper wire, class 15517P;A4

IEC 60317-21 AMD 2-1999特种绕组线规范.第21部分:涂覆聚酰胺的可焊接聚氨基甲

酸乙酯漆包圆铜绕组线,155级.修改件2

Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelledround copper wire overcoated with polyamide, class 155; Amendment 23P;A4

IEC 60317-21 Edition 2.2-2000绕组线特殊类型规范.第21部分:155级聚酰氨包覆的可焊聚

氨酯瓷漆圆形铜线

Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelledround copper wire overcoated with polyamide, class 15519P;A4

IEC 60317-21-1990特种绕组线规范.第21部分:涂覆聚酰胺的可焊接聚氨基甲

酸乙酯漆包圆铜绕组线,155级

Specifications for particular types of winding wires; part 21: solderable polyurethane enamelledround copper wire overcoated with polyamide, class 15519P;A4

IEC 60317-2-1990特种绕组线规范.第2部分:带粘合层的可焊接的聚氨基甲酸

乙酯漆包圆铜绕组线,130级

Specifications for particular types of winding wires; part 2: solderable polyurethane enamelledround copper wire, class 130, with a bonding layer17P;A4

IEC 60317-22-1990特种绕组线规范.第22部分:涂覆聚酰胺的聚酯或聚酰胺酯

漆包圆铜绕组线,180级

Specifications for particular types of winding wires; part 22: polyester or polyesterimideenamelled round copper wire overcoated with polyamide, class 18019P;A4

IEC 60317-23 AMD 2-1999特种绕组线规范.第23部分:可焊接的聚酰胺酯漆包圆铜绕

组线,180级.修改件2

Specifications for particular types of winding wires - Part 23: Solderable polyesterimideenamelled round copper wire, class 180; Amendment 23P;A4


铜线

Specifications for particular types of winding wires - Part 23: Solderable polyesterimideenamelled round copper wire, class 18015P;A4

IEC 60317-23-1990特种绕组线规范.第23部分:可焊接的聚酰胺酯漆包圆铜绕

组线,180级

Specifications for particular types of winding wires; part 23: solderable polyesterimide enamelledround copper wire, class 18017P;A4

IEC 60317-24-1990特种绕组线规范.第24部分:涂覆聚酰胺的聚酯或聚酰胺酯

漆包圆铝绕组线,180级

Specifications for particular types of winding wires; part 24: polyester or polyesterimideenamelled round aluminium wire overcoated with polyamide, class 18017P;A4

（80） 351

IEC标准目录


开本页数

IEC 60317-25 AMD 1-1997特种绕组线规范.第25部分:涂覆聚酰胺-酰亚胺酯的聚亚酰

胺酯漆包圆铝绕组线,200级.修改件1

Specifications for particular types of winding wires - Part 25: Polyester or polyesterimideovercoated with polyamide-imide enamelled round aluminium wire, class 200; Amendment 13P;A4

IEC 60317-25 Edition 2.2-1997特种绕组线规范.第25部分:涂覆聚酰胺-酰亚胺的聚酯或聚

酯酰亚胺漆包圆铝线.200级

Specifications for particular types of winding wires - Part 25: Polyester or polyesterimideovercoated with polyamide-imide enamelled round aluminium wire, class 20030P;A4

IEC 60317-25-1990特种绕组线规范.第25部分:涂覆聚酰胺-酰亚胺酯的聚亚酰

胺酯漆包圆铝绕组线,200级

Specifications for particular types of winding wires; part 25: polyester or polyesterimideovercoated with polyamide-imide enamelled round aluminium wire, class 20017P;A4

IEC 60317-26-1990特种绕组线规范.第26部分:聚酰胺-亚酰胺酯漆包圆铜绕组

线,200级

Specifications for particular types of winding wires; part 26: polyamide-imide enamelled roundcopper wire, class 20015P;A4

IEC 60317-27 AMD 1-1999 特种绕组线规范.第27部分:包漆绝缘带的扁铜线.修改件1Specifications for particular types of winding wires - Part 27: Enamelled tape covered rectangularcopper wire; Amendment 13P;A4

IEC 60317-27-1998 特种绕组线规范.第27部分:纸包覆的扁铜线Specifications for particular types of winding wires - Part 27: Paper type covered rectangularcopper wire17P;A4

IEC 60317-28-1990特种绕组线规范.第28部分:聚酰胺酯漆包扁铜绕组线,180级

Specifications for particular types of winding wires; part 28: polyesterimide enamelled rectangularcopper wire, class 18013P;A4

IEC 60317-29-1990特种绕组线规范.第29部分:涂覆聚酰胺-酰亚胺的聚酯或聚

酰胺酯漆包圆扁铜绕组线,200级

Specifications for particular types of winding wires; part 29: polyester or polyesterimideovercoated with polyamide-imide enamelled rectangular copper wire, class 20013P;A4

IEC 60317-30-1990特种绕组线规范.第30部分:聚酰亚胺漆包扁铜绕组线,220级

Specifications for particular types of winding wires; part 30: polyimide enamelled rectangularcopper wire, class 22013P;A4

IEC 60317-31 AMD 1-1997特种绕组线规范.第31部分:温度系数为180的玻璃纤维绕制

的,聚脂或聚酰胺酯漆处理的裸线或漆包扁铜绕组线.修订

件1

Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnishimpregnated, bare or enamelled rectangular copper wire, temperature index 180; Amendment 13P;A4

IEC 60317-31 Edition 1.1-1997特种绕组线规范.第31部分:温度指数为180的、玻璃丝绕包

的、树脂或清漆浸渍的裸线或漆包扁铜线

Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnishimpregnated, bare or enamelled rectangular copper wire, temperature index 18026P;A4

IEC 60317-31-1990特种绕组线规范.第31部分:致冷温度指数为180的,玻璃纤

维绕制的,聚酯或聚酰胺酯漆处理过的,裸线或漆包扁铜绕

组线

Specifications for particular types of winding wires; part 31: glass-fibre wound, polyester orpolyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index180

IEC 60317-3-1990 特种绕组线规范.第3部分:聚酯漆包圆铜绕组线,155级Specifications for particular types of winding wires; part 3: polyester enamelled round copperwire, class 15515P;A4

（81） 351

IEC标准目录


开本页数



件1




Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or varnishimpregnated, bare or enamelled rectangular copper wire, temperature index 15526P;A4


维绕制的,聚酯或聚酰胺酯漆处理过的,裸线或漆包扁铜绕

组线

Specifications for particular types of winding wires; part 32: glass-fibre wound, polyester orpolyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index155



件1




Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnishimpregnated, bare or enamelled rectangular copper wire, temperature index 20026P;A4


维绕制的,硅氧烷漆处理过的,裸线或漆包扁铜绕组线

Specifications for particular types of winding wires; part 33: glass-fibre wound, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 20015P;A4

IEC 60317-34-1997 特种绕组线规范.第34部分:聚酯漆包圆铜线.130L级Specifications for particular types of winding wires - Part 34: Polyester enamelled round copperwire, class 130 L13P;A4

IEC 60317-35 AMD 2-1999特种绕组线规范.第35部分:有粘结层的可焊接聚氨基甲酸

乙酯漆包圆铜绕组线.155级.修改件2

Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelledround copper wire, class 155, with a bonding layer; Amendment 27P;A4

IEC 60317-35 Edition 1.2-2000绕阻线特殊类型规范.第35部分:155级带粘合层的可焊接的

聚氨酯瓷漆园形铜线

Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelledround copper wire, class 155, with a bonding layer19P;A4

IEC 60317-36 AMD 2-1999特种绕组线规范.第36部分:有粘结层的可焊接聚酰胺酯漆

包圆铜绕组线.180级.修改件2

Specifications for particular types of winding wires - Part 36: Solderable polyesterimideenamelled round copper wire, class 180, with a bonding layer; Amendment 27P;A4

IEC 60317-36 Edition 1.2-2000绕阻线特殊类型规范.第36部分:180级带粘合层的可焊接的

聚酯瓷漆园形铜线

Specifications for particular types of winding wires - Part 36: Solderable polyesterimideenamelled round copper wire, class 180, with a bonding layer19P;A4

IEC 60317-37 AMD 2-1999特种绕组线规范.第37部分:有粘结层的聚酰胺酯漆包圆铜

绕组线.180级.修改件2

Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled roundcopper wire, class 180, with a bonding layer; Amendment 27P;A4

IEC 60317-37 Edition 1.2-2000绕阻线特殊类型规范.第37部分:180级带粘合层的聚酯瓷漆

园形铜线

Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled roundcopper wire, class 180, with a bonding layer19P;A4

（82） 351

IEC标准目录


开本页数

IEC 60317-38 AMD 2-1999特种绕组线规范.第38部分:有粘结层的涂覆聚酯或聚酰胺

酯的聚酰胺-酰亚胺漆包圆铜绕组线.200级.修改件2

Specifications for particular types of winding wires - Part 38: Polyester or polyesterimideovercoated with polyamid-imide enamelled round copper wire, class 200, with a bonding layer;Amendment 2

IEC 60317-38 Edition 1.2-2000绕阻线特殊类型规范.第38部分:200级的带粘合层的聚酯或

聚亚胺瓷漆园形铜线

Specifications for particular types of winding wires - Part 38: Polyester or polyesterimideovercoated with polyamid-imide enamelled round copper wire, class 200, with a bonding layer19P;A4

IEC 60317-39 AMD 1-1997特种绕组线规范.第39部分:致冷温度指数为180的带玻璃

纤维编织层的,聚酯或聚酰胺酯漆处理过的裸线或漆包扁铜

绕组线.修改件1

Specifications for particular types of winding wires - Part 39: Glass-fibre braided, polyester orpolyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index180; Amendment 13P;A4

IEC 60317-39-1992特种绕组线规范.第39部分:温度指数为180的玻璃纤维编

织的聚酯或聚酰胺酯漆处理过的裸线或漆包扁铜线

Specifications for particular types of winding wires; part 39: glass-fibre braided, polyester orpolyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index180

IEC 60317-4 AMD 2-1999特种绕组线规范.第4部分:可焊接的聚氨基甲酸乙酯漆包圆

铜绕组线,130级.修改件2

Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelledround copper wire, class 130; Amendment 23P;A4


铜线

Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelledround copper wire, class 13015P;A4

IEC 60317-40 AMD 1-1997特种绕组线规范.第40部分:致冷温度指数为200的带玻璃

纤维编织层的,硅氧烷漆处理过的裸线或漆包扁铜绕组线.修改件1

Specifications for particular types of winding wires - Part 40: Glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200; Amendment 13P;A4

IEC 60317-40-1992特种绕组线规范.第40部分:温度指数为200的玻璃纤维编

织的硅树脂清漆处理过的裸线或漆包扁铜线

Specifications for particular types of winding wires; part 40: glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 20015P;A4

IEC 60317-41-1996特种绕组线规范.第41部分:130L类可钎焊的聚酯漆包圆铜

绕组线

Specifications for particular types of winding wires - Part 41: Solderable polyester enamelledround copper wire, class 130L17P;A4

IEC 60317-4-1990特种绕组线规范.第4部分:可焊接的聚氨基甲酸乙酯漆包圆

铜绕组线,130级

Specifications for particular types of winding wires; part 4: solderable polyurethane enamelledround copper wire, class 13017P;A4

IEC 60317-42-1997 特种绕组线规范.第42部分:聚亚酰胺酯漆包圆铜线.200级Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelledround copper wire, class 20013P;A4

IEC 60317-43-1997特种绕组线规范.第43部分:芳香聚酰亚胺绝缘胶带包圆铜

线.240级

Specification for particular types of winding wires - Part 43: Aromatic polyimide tape wrappedround copper wire, class 24025P;A4

IEC 60317-44-1997特种绕组线规范.第44部分:芳族聚酰亚胺包装矩形铜

线.240级

Specification for particular types of winding wires - Part 44: Aromatic polyimide tape wrappedrectangular copper wire, class 24021P;A4

（83） 351

IEC标准目录


开本页数

IEC 60317-45-1998特殊类型的绕阻线规范.第45部分:聚酯涂釉的圆形铜

线.130级

Specifications for particular types of winding wires - Part 45: Polyester enamelled round copperwire, class 13013P;A4

IEC 60317-46-1997 特种绕组线规范.第46部分:芳族聚酰胺漆包圆铜线.240级Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled roundcopper wire, class 24015P;A4

IEC 60317-47-1997特种绕组线规范.第47部分:芳族聚酰胺漆包矩形铜线.240级

Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelledrectangular copper wire, class 24013P;A4

IEC 60317-48-1999特种绕组线规范.第48部分:玻璃纤维绕组树脂或清漆浸渍

裸铜线或漆包圆铜线.温度指数155

Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnishimpregnated, bare or enamelled round copper wire, temperature index 15511P;A4







IEC 60317-51-2001 特种绕组线规范.第51部分:钎焊聚氨酯漆包圆铜线180级Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelledround copper wire, class 18013P;A4

IEC 60317-52-1999特种绕组线规范.第52部分:聚芳香酰胺酯型包被的圆铜线.温度指数220

Specifications for particular types of winding wires - Part 52: Aromatic polyamide (aramid) tapewrapped round copper wire, temperature index 22025P;A4

IEC 60317-53-1999特种绕组线规范.第53部分:芳香聚酰胺带包装的矩型铜线.温度指数220

Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tapewrapped rectangular copper wire, temperature index 22041P;A4

IEC 60317-54-2001 特种绕组线规范.第54部分:聚酯漆包圆铜线155L级Specifications for particular types of winding wires - Part 54: Polyester enamelled round copperwire, class 155L17P;A4

IEC 60317-7 AMD 1-1997特种绕组线规范.第7部分:聚酰亚胺漆包圆铜绕组线,220级.修改件1

Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copperwire, class 220; Amendment 13P;A4

IEC 60317-7 Edition 3.2-1997 特种绕组线规范.第7部分:聚酰亚胺漆包圆铜线.220级Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copperwire, class 22028P;A4

IEC 60317-7-1990 特种绕组线规范.第7部分:聚酰亚胺漆包圆铜绕组线,220级Specifications for particular types of winding wires; part 7: polyimide enamelled round copperwire, class 22015P;A4

（84） 351

IEC标准目录


开本页数

IEC 60317-8 AMD 1-1997特种绕组线规范.第8部分:聚酰胺酯漆包圆铜绕组线,180级.修改件1

Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled roundcopper wire, class 180; Amendment 13P;A4

IEC 60317-8 Edition 3.2-1997 特种绕组线规范.第8部分:聚酯酰亚胺漆包圆铜线.180级Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled roundcopper wire, class 18030P;A4

IEC 60317-8-1990 特种绕组线规范.第8部分:聚酰胺酯漆包圆铜绕组线,180级Specifications for particular types of winding wires; part 8: polyesterimide enamelled roundcopper wire, class 18017P;A4

IEC 60318-1-1998电声学.人的头和耳的模拟器.第1部分:耳模拟器用超级听力

耳机的校正

Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration ofsupra-aural earphones21P;A4

IEC 60318-2-1998电声学.人头和耳模拟器.第2部分:在扩展高频范围内测听力

耳机校正用间歇听力偶合器

Electroacoustics - Simulators of human head and ear - Part 2: An interim acoustic coupler for thecalibration of audiometric earphones in the extended high-frequency range19P;A4

IEC 60318-3-1998电声学.人头和耳模拟器.第3部分:用于听力测定计的超听力

耳机校正用声耦合器

Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibrationof supra-aural earphones used in audiometry17P;A4

IEC 60319-1999 电子元器件可靠性数据的表示和规范Presentation and specification of reliability data for electronic components39P;A4

IEC 60320-1-2001 家用和类似一般用途器具连接器.第1部分:一般要求Appliance couplers for household and similar general purposes - Part 1: General requirements235P;A4

IEC 60320-2-1-2000 家用和类似一般用途器具连接器.第2-1部分:缝纫机连接器Appliance couplers for household and similar general purposes - Part 2-1: Sewing machinecouplers

IEC 60320-2-2-1998家用和类似一般用途电器连接器.第2-2部分:家用和类似设

备用互联耦合器

Appliance couplers for household and similar general purposes - Part 2-2: Interconnectioncouplers for household and similar equipment75P;A4

IEC 60320-2-3-1998家用和类似通用电器连接器.第2-3部分:保护等级高于IPXO的连接器

Appliance coupler for household and similar general purposes - Part 2-3: Appliance coupler witha degree of protection higher than IPXO59P;A4

IEC 60321 AMD 1-1975供安装在印制线路和印制电路板上用的元件的设计和使用指南.第1次修改

Guidance for the design and use of components intended for mounting on boards with printedwiring and printed circuits

IEC 60321-2-1987供安装在印制线路和印制电路板上用的元件的设计和使用指南.第2部分:再次使用、修理、修改

Guidance for the design and use of components intended for mounting on boards with printedwiring and printed circuits. Part 2: Rework, repair, modifications.

IEC 60321-3-1990 辅助印制电路板信息.第3部分:图形用指南Auxiliary printed board information; part 3: guidelines for artwork37P;A4

IEC 60322-2001铁路应用.铁道车辆用电气设备.开式结构的电源电阻器的

规则

Railway applications - Electric equipment for rolling stock - Rules for power resistors of openconstruction39P;A4

（85） 351

IEC标准目录


开本页数

IEC 60325-2002辐射防护仪.α、β和α/β(β 能量大于60 keV)污染测量仪和监

测仪

Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy 60 keV)contamination meters and monitors79P;A4

IEC 60326-10-1991印制电路板.第10部分:有贯穿连接的弯曲刚性双面印制电

路板规范

Printed boards; part 10: specification for flex-rigid double-sided printed boards with throughconnections51P;A4

IEC 60326-11-1991 印制电路板.第11部分:有贯穿连接的弯曲刚性多层印制电

路板规范

Printed boards; part 11: specification for flex-rigid multilayer printed boards with throughconnections

IEC 60326-12-1992印制电路板.第12部分:大块分层面板(半成品多层印制板)规范

Printed boards; part 12: specification for mass lamination panels (semi-manufactured multilayerprinted boards)33P;A4

IEC 60326-2 AMD 1-1992 第1次修改Printed boards; part 2: test methods; amendment 18P;A4

IEC 60326-2-1990 印制电路板.第2部分:试验方法Printed boards; part 2: test methods121P;A4

IEC 60326-3-1991 印制电路板.第3部分:印制电路板的设计和应用Printed boards; part 3: design and use of printed boards109P;A4

IEC 60326-4 AMD 1-1989印制板.第4部分:具有非金属化孔的单面和双面印制板规范.第1次修改

Printed boards; part 4: specification for single and double sided printed boards with plain holes;amendment 1 to IEC 60326-4:19809P;A4

IEC 60326-4-1980 印制板.第4部分:具有非金属化孔的单面和双面印制板规范Printed boards. Part 4 : Specification for single and double sided printed boards with plain holes23P;A4

IEC 60326-5 AMD 1-1989印制板.第5部分:具有金属化孔的单面和双面印制板规范.第1次修改

Printed boards; part 5: specification for single and double sided printed boards with plated-through holes; amendment No. 1 to IEC 60326-5:19809P;A4

IEC 60326-5-1980 印制板.第5部分:具有金属化孔的单面和双面印制板规范Printed boards. Part 5 : Specification for single and double sided printed boards with plated-through holes29P;A4

IEC 60326-7 AMD 1-1989印制板.第7部分:无贯穿连接的单面和双面挠性印制板规范.第1次修改

Printed boards; part 7: specification for single and double sided flexible printed boards withoutthrough connections; amendment 1 to IEC 60326-7:19813P;A4

IEC 60326-7-1981 印制板.第7部分:无贯穿连接的单面和双面挠性印制板规范Printed boards. Part 7 : Specification for single and double sided flexible printed boards withoutthrough connections30P;A4

IEC 60326-8 AMD 1-1989印制板.第8部分:有贯穿连接的单面和双面挠性印制板规范.第1次修改

Printed boards; part 8: specification for single and double sided flexible printed boards withthrough connections; amendment 1 to IEC 60326-8:19813P;A4

IEC 60326-8-1981 印制板.第8部分:有贯穿连接的单面和双面挠性印制板规范Printed boards. Part 8 : Specification for single and double sided flexible printed boards withthrough connection33P;A4

（86） 351

IEC标准目录


开本页数

IEC 60326-9-1991 印制电路板.第9部分:有贯穿连接的挠性多层印制板规范Printed boards; part 9: specification for flexible multilayer printed boards with through connections63P;A4

IEC 60327-1971采用互易技术对1英寸标准电容传声器进行压力校准的精

密方法

Precision method for pressure calibration of one-inch standard condenser microphones by thereciprocity technique37P;A4

IEC 60329-1985 用于电子和电信设备的晶粒取向硅铁合金带绕切割磁芯

Strip-wound cut cores of grain oriented silicon-iron alloy, used for electronic andtelecommunication equipment67P;A4

IEC 60331-11-1999着火条件下电缆的试验.在至少750摄氏度下火焰中设备线

路完整性

Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone ata flame temperature of at least 750 C33P;A4

IEC 60331-12-2002着火条件下电缆的试验.电路完整性.第12部分:仪器.至少在

830鳦条件下冲击燃烧

Tests for electric cables under fire conditions - Circuit integrity - Part 12: Apparatus; Fire withshock at a temperature of at least 830 鳦29P;A4

IEC 60331-21-1999着火条件下电缆的试验.线路完整性.第21部分:过程和要求.额定电压达到和包括0,6/1,0KV的电缆

Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures andrequirements - Cables of rated voltage up to and including 0,6/1,0 kV19P;A4

IEC 60331-23-1999着火条件下电缆的试验.线路完整性.第23部分:过程和要求.电数据电缆

Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures andrequirements - Electric data cables19P;A4

IEC 60331-25-1999着火条件下电缆的试验.线路完整性.第25部分:过程和要求.光纤电缆

Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures andrequirements - Optical fibre cables13P;A4

IEC 60331-31-2002着火条件下电缆的试验.电路完整性.第31部分:冲击着火的

程序和要求.额定电压高达(和包括)0,6/1,0 KV的电缆

Tests for electric cables under fire conditions - Circuit integrity - Part 31: Procedures andrequirements for fire with shock; Cables of rated voltage up to and including 0,6/1,0 kV21P;A4

IEC 60332-1-1993 电缆在着火条件下的试验.第1部分:单根垂直绝缘线或电缆

的试验

Tests on electric cables under fire conditions; part 1: test on a single vertical insulated wire orcable

IEC 60332-2-1989电缆在着火条件下的试验.第2部分:单根细绝缘铜线电缆的

试验

Tests on electric cables under fire conditions; part 2: test on a single small vertical insulatedcopper wire or cable9P;A4

IEC 60332-3-10-2000电缆在着火条件下的试验.第3-10部分:垂直束状电线或电

缆垂直火焰蔓延的试验.仪器

Tests on electric cables under fire conditions - Part 3-10: Test for vertical flame spread ofvertically-mounted bunches wires or cables; Apparatus39P;A4


缆垂直火焰蔓延的试验.A F/R类

Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread ofvertically-mounted bunched wires or cables; Category A F/R25P;A4


缆垂直火焰蔓延的试验.A类

Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread ofvertically-mounted bunched wires or cables; Category A27P;A4

（87） 351

IEC标准目录


开本页数


缆垂直火焰蔓延的试验.B类

Tests on electric cables under fire conditions - Part 3-23: Test for vertical flame spread ofvertically-mounted bunched wires or cables; Category B25P;A4


缆垂直火焰蔓延的试验.C类

Tests on electric cables under fire conditions - Part 3-24: Test for vertical flame spread ofvertically-mounted bunched wires or cables; Category C25P;A4


缆垂直火焰蔓延的试验.D类

Tests on electric cables under fire conditions - Part 3-25: Test for vertical flame spread ofvertically-mounted bunched wires or cables; Category D25P;A4

IEC 60333-1993 核仪表.半导体带电粒子探测器试验程序Nuclear instrumentation; semiconductor charged-particle detectors; test procedures76P;A4

IEC 60335-1-2001 家用和类似用途电器的安全.第1部分:一般要求 Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-2-100-2002家用和类似电器的安全.第2-100部分:手持式电动真空花园

用鼓风机和真空鼓风机的特殊要求

Household and similar electrical appliances - Safety - Part 2-100: Particular requirements forhand-held mains-operated garden blowers, vacuums and blower vacuums15P;A4

IEC 60335-2-101-2002 家用和类似电器的安全.第2-101部分:蒸发器的特殊要求Household and similar electrical appliances - Safety - Part 2-101: Particular requirements forvaporizers25P;A4

IEC 60335-2-10-2002家用和类似用途电器的安全.第2-10部分:地板处理机和湿

式擦洗机的特殊要求

Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floortreatment machines and wet scrubbing machines12P;A4

IEC 60335-2-103-2002家用和类似用途电器的安全.第2-103部分:大门、房门和窗

户的驱动装置的特殊要求

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements fordrives for gates, doors and windows23P;A4

IEC 60335-2-104-2003家用和类似用途电器的安全.第2-104部分:从空调和冷藏设

备中恢复和/或再循环冷冻剂的器具的特殊要求

Household and similar electrical appliances - Safety - Part 2-104: Particular requirements forappliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment50P;A4

IEC 60335-2-11 AMD 1-2003家用和类似用途电器的安全.第2-11部分:滚筒式干衣机的

特殊要求.修改1

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements fortumble dryers; Amendment 14P;A4

IEC 60335-2-11 Edition 6.1-2003

家用和类似用途电器.安全.第2-11部分:滚筒干衣机的特殊

要求

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements fortumble dryers24P;A4

IEC 60335-2-11-2002家用和类似用途电器.安全.第2-11部分:滚筒干衣机的特殊

要求

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements fortumble dryers18P;A4

IEC 60335-2-12-2002家用和类似用途电器的安全.第2-12部分:保温板和类似器

具的特殊要求

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements forwarming plates and similar appliances13P;A4

（88） 351

IEC标准目录


开本页数

IEC 60335-2-13-2002家用和类似用途电器的安全.第2-13部分:深油煎锅、浅平

底锅和类似器具的特殊要求

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deepfat fryers, frying pans and similar appliances13P;A4

IEC 60335-2-14-2002家用和类似用途电器的安全.第2-14部分:厨房机械的特殊

要求

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements forkitchen machines26P;A4

IEC 60335-2-15 Edition 4.1-2000

家用和类似用电器的安全.第2-15部分:加热液体用器具的

特殊要求

Safety of household and similar electrical appliances - Part 2-15: Particular requirements forappliances for heating liquids41P;A4

IEC 60335-2-15-2002家用和类似电器的安全.第2-15部分:液体加热器的特殊要

求

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements forappliances for heating liquids21P;A4

IEC 60335-2-16-2002家用和类似用途电器的安全.第2-16部分:食物废弃物处理

器的特殊要求

Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for foodwaste disposers12P;A4

IEC 60335-2-17-2002家用和类似用途电器的安全.第2-17部分:电热毯、电热垫

和类似柔性加热电器的特殊要求

Household and similar electrical appliances - Safety - Part 2-17: Particular requirements forblankets, pads and similar flexible heating appliances53P;A4

IEC 60335-2-21-2002家用和类似电器的安全.第2-21部分:贮水式加热器的特殊

要求

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements forstorage water heaters21P;A4

IEC 60335-2-2-2002家用和类似电器的安全.第2-2部分: 真空吸尘器和吸水式吸

尘器的特殊要求

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements forvacuum cleaners and water-suction cleaning appliances21P;A4

IEC 60335-2-23-2003家用和类似用途电器的安全.第2-23部分:皮肤或毛发护理

器具的特殊要求

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements forappliances for skin or hair care24P;A4

IEC 60335-2-24-2002家用和类似用途电器的安全.第2-24部分:制冷电器、冰激

淋机和制冰机的特殊要求

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements forrefrigerating appliances, ice-cream appliances and ice-makers47P;A4

IEC 60335-2-25-2002家用和类似用途电器.安全.第2-25部分:微波炉(包括组合微

波炉)的特殊要求

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements formicrowave ovens, including combination microwave ovens51P;A4

IEC 60335-2-26-2002 家用和类似用途电器的安全.第2-26部分:钟表的特殊要求Household and similar electrical appliances - Safety - Part 2-26: Particular requirements forclocks

IEC 60335-2-27-2002家用和类似用途电器的安全.第2-27部分:紫外和红外辐射

皮肤护理电器的特殊要求

Household and similar electrical appliances; Safety - Part 2-27: Particular requirements forappliances for skin exposure to ultraviolet and infrared radiation21P;A4

（89） 351

IEC标准目录


开本页数

IEC 60335-2-28-2002家用和类似用途电器的安全.第2-28部分:缝纫机的特殊要

求

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements forsewing machines12P;A4

IEC 60335-2-29-2003家用和类似用途电器.安全.第2-29部分:电池充电器的特殊

要求

Household and similar electrical appliances; Safety - Part 2-29: Particular requirements forbattery chargers40P;A4

IEC 60335-2-30-2002家用和类似用途电器的安全.第2部分:房间加热器的特殊要

求

Household and similar electrical appliances; Safety - Part 2-30: Particular requirements for roomheaters26P;A4

IEC 60335-2-31-2002家用和类似用途电器的安全.第2-31部分:排油烟机的特殊

要求

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements forrange hoods13P;A4

IEC 60335-2-3-2002 家用和类似用途电器.安全.第2-3部分:电熨斗的特殊要求Household and similar electrical appliances - Safety - Part 2-3: Particular requirements forelectric irons17P;A4

IEC 60335-2-32-2002家用和类似用途电器的安全.第2-32部分:按摩电器的特殊

要求

Household and similar electrical appliances - Safety - Part 2-32: Particular requirements formassage appliances12P;A4

IEC 60335-2-34-2002家用和类似用途电器的安全.第2-34部分:电动机-压缩机组

的特殊要求

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements formotor-compressors26P;A4

IEC 60335-2-35-2002家用和类似用途电器的安全.第2-35部分:快热式热水器的

特殊要求

Household and similar electrical appliances; Safety - Part 2-35: Particular requirements forinstantaneous water heaters20P;A4

IEC 60335-2-36-2002家用和类似用途电器的安全.第2部分:商用电灶、电烤炉、

电灶台及灶台元件的特殊要求

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements forcommercial electric cooking ranges, ovens, hobs and hob elements28P;A4

IEC 60335-2-37-2002家用和类似用途电器的安全.第2-37部分:商用电深油煎锅

的特殊要求

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements forcommercial electric deep fat fryers23P;A4

IEC 60335-2-38-2002家用和类似用途电器的安全.第2-38部分:商用电烤盘和烤

架的特殊要求

Household and similar electrical appliances - Safety - Part 2-38: Particular requirements forcommercial electric griddles and griddle grills22P;A4

IEC 60335-2-39-2002家用和类似用途电器的安全.第2-39部分:商业多用途电烹

调平锅的特殊要求

Household and similar electrical appliances - Safety - Part 2-39: Particular requirements forcommercial electric multi-purpose cooking pans20P;A4

IEC 60335-2-40-2002家用和类似用途电器的安全.第2-40部分:电动热泵、空调

器和去湿器的特殊要求

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements forelectrical heat pumps, air conditioners and dehumidifiers36P;A4

（90） 351

IEC标准目录


开本页数

IEC 60335-2-41-2002 家用和类似用途电器的安全.第2-41部分:泵的特殊要求Household and similar electrical appliances - Safety - Part 2-41: Particular requirements forpumps

IEC 60335-2-4-2003家用和类似用途电器.安全.第2-4部分:离心脱水机的特殊要

求

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spinextractors40P;A4

IEC 60335-2-42-2002家用和类似用途电器的安全.第2-42部分:商用强制对流电

烤炉、蒸锅和蒸汽对流炉的特殊要求

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements forcommercial electric forced convection ovens, steam cookers and steam-convection ovens24P;A4

IEC 60335-2-43-2002家用和类似用途电器的安全.第2-43部分:干衣机和毛巾架

的特殊要求

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements forclothes dryers and towel rails12P;A4

IEC 60335-2-44-2002 家用和类似用途电器的安全.第2-44部分:熨平机的特殊要

求

Household and similar electrical appliances; Safety - Part 2-44: Particular requirements forironers

IEC 60335-2-45-2002家用和类似用途电器的安全.第2-45部分:便携式电热工具

及其类似电器的特殊要求

Household and similar electrical appliances - Safety - Part 2-45: Particular requirements forportable heating tools and similar appliances18P;A4

IEC 60335-2-47-2002家用和类似用途电器的安全.第2-47部分:商用电煮锅的特

殊要求

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements forcommercial electric boiling pans21P;A4

IEC 60335-2-48-2002家用和类似用途电器的安全.第2-48部分:商用电烤架和面

包片烘烤器的特殊要求

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements forcommercial electric grillers and toasters18P;A4

IEC 60335-2-49-2002家用和类似用途电器的安全.第2-49部分:商用电烘干碗柜

的特殊要求

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements forcommercial electric hot cupboards19P;A4

IEC 60335-2-50-2002家用和类似用途电器的安全.第2-50部分:商用双层电蒸锅

的特殊要求

Household and similar electrical appliances - Safety - Part 2-50: Particular requirements forcommercial electric bains-marie20P;A4

IEC 60335-2-51-2002家用和类似用途电器的安全.第2-51部分:加热和供水设施

用固定式循环泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements forstationary circulation pumps for heating and service water installations12P;A4

IEC 60335-2-5-2002 家用和类似用途电器.安全.第2-5部分:洗碗机的特殊要求Household and similar electrical appliances - Safety - Part 2-5: Particular requirements fordishwashers19P;A4

IEC 60335-2-52-2002家用和类似用途电器的安全.第2-52部分:口腔保健电器的

特殊要求

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oralhygiene appliances11P;A4

IEC 60335-2-53-2002家用和类似用途电器的安全.第2-53部分:桑拿浴加热电器

的特殊要求

Household and similar electrical appliances - Safety - Part 2-53: Particular requirements forsauna heating appliances17P;A4

（91） 351

IEC标准目录


开本页数

IEC 60335-2-54-2002家用和类似电器的安全.第2-54部分:用液体或蒸汽的表面

清洁电器的特殊要求

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements forsurface-cleaning appliances use employing liquids or steam20P;A4

IEC 60335-2-55-2002家用及类似用途电器的安全.第2-55部分:养鱼池和花园池

塘用电器的特殊要求

Household and similar electrical appliances - Safety - Part 2-55: Particular requirements forelectrical appliances for use with aquariums and garden ponds13P;A4

IEC 60335-2-56-2002家用和类似用途电器的安全.第2-56部分:投影仪及类似电

器的特殊要求

Household and similar electrical appliances - Safety - Part 2-56: Particular requirements forprojectors and similar appliances15P;A4

IEC 60335-2-57-1989家用和类似电器的安全.第2部分第57节:带插入式电动压缩

机的冰淇淋机的特殊要求

Safety of household and similar electrical appliances; part 2: particular requirements for ice-cream appliances with incorporated motor-compressors32P;A4

IEC 60335-2-58-2002家用和类似用途电器的安全.第2-58部分:商用电洗碟机的

特殊要求

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements forcommercial electric dishwashing machines31P;A4

IEC 60335-2-59-2002家用和类似用途电器的安全.第2-59部分:杀虫器的特殊要

求

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements forinsect killers15P;A4

IEC 60335-2-60-2002家用和类似用途电器的安全.第2-60部分:涡流浴器的特殊

要求

Household and similar electrical appliances - Safety - Part 2-60: Particular requirements forwhirlpool baths13P;A4

IEC 60335-2-61-2002家用和类似用途电器的安全.第2-61部分:贮热式房间电暖

器的特殊要求

Household and similar electrical appliances; Safety - Part 2-61: Particular requirements forthermal-storage room heaters19P;A4

IEC 60335-2-6-2002家用和类似电器的安全.第2-6部分:固定烹调灶具,炉架,烤炉和类似器具的特殊要求

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements forstationary cooking ranges, hobs, ovens and similar appliances38P;A4

IEC 60335-2-62-2002家用和类似用途电器的安全.第2-62部分:商用电洗池的特

殊要求

Household and similar electrical appliances - Safety - Part 2-62: Particular requirements forcommercial electric rinsing sinks18P;A4

IEC 60335-2-64-2002家用及类似用途电器的安全.第2-64部分:商用炊事电机械

的特殊要求

Household and similar electrical appliances - Safety - Part 2-64: Particular requirements forcommercial electric kitchen machines27P;A4

IEC 60335-2-65-2002家用和类似用途电器的安全.第2-65部分:空气净化电器的

特殊要求

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances12P;A4

IEC 60335-2-66-2003家用和类似用途电器.安全.第2-66部分:水床加热器的特殊

要求

Household and similar electrical appliances; Safety - Part 2-66: Particular requirements for water-bed heaters40P;A4

（92） 351

IEC标准目录


开本页数

IEC 60335-2-67-2002家用和类似电器的安全.第2-67部分:工业和商用地板处理

机和地板清洗机的特殊要求.修改件1

Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floortreatment and floor cleaning machines, for industrial and commercial use19P;A4

IEC 60335-2-68-2002家用和类似电器的安全.第2-68部分:工业和商用喷雾萃取

装置的特殊要求

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for sprayextraction appliances, for industrial and commercial use20P;A4

IEC 60335-2-69-2002家用和类似电器的安全.第2-69部分:工业和商用带电动刷

的湿式和干式真空吸尘器的特殊要求

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wetand dry vacuum cleaners, including power brush, for industrial and commercial use35P;A4

IEC 60335-2-70-2002 家用和类似用途电器.安全.第2-70部分:挤奶机的特殊要求Household and similar electrical appliances - Safety - Part 2-70: Particular requirements formilking machines18P;A4

IEC 60335-2-71-2002家用和类似用途电器.安全.第2-71部分:家畜繁殖和饲养用

电热器的特殊要求

Household and similar electrical appliances - Safety - Part 2-71: Particular requirements forelectrical heating appliances for breeding and rearing animals17P;A4

IEC 60335-2-7-2002 家用和类似电器的安全.第2-7部分:洗衣机的特殊要求Household and similar electrical appliances - Safety - Part 2-7: Particular requirements forwashing machines21P;A4

IEC 60335-2-72-2002家用和类似电器的安全.第2-72部分:工业和商用地板自动

处理机械的特殊要求

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements forautomatic machines for floor treatment for commercial and industrial use23P;A4

IEC 60335-2-73-2002家用和类似用途电器的安全.第2-73部分:固定浸入式加热

器的特殊要求

Household and similar electrical appliances; Safety - Part 2-73: Particular requirements for fixedimmersion heaters11P;A4

IEC 60335-2-74-2003家用和类似用途电器.安全.第2-74部分:便携浸入式加热器

的特殊要求

Household and similar electrical appliances; Safety - Part 2-74: Particular requirements forportabel immersion heaters30P;A4

IEC 60335-2-75-2002家用和类似用途电器的安全.第2-75部分:商业分配电器和

自动售货机的特殊要求

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements forcommercial dispensing appliances and vending machines28P;A4

IEC 60335-2-76-2002家用和类似用途电器的安全.第2-76部分:栅栏充电器的特

殊要求

Household and similar electrical appliances - Safety - Part 2-76: Particular requirements forelectric fence energizers43P;A4

IEC 60335-2-77-2002家用和类似电器的安全.第2-77部分:脚踏控制的电源线操

作的剪草机的特殊要求

Household and similar electrical appliances - Safety - Part 2-77: Particular requirements forpedestrian controlled mains-operated lawnmowers111P;A4

IEC 60335-2-78-2002家用和类似用途电器的安全.第2-78部分:户外烤肉架的特

殊要求

Household and similar electrical appliances - Safety - Part 2-78: Particular requirements foroutdoor barbecues12P;A4

（93） 351

IEC标准目录


开本页数

IEC 60335-2-79-2002家用和类似电器的安全.第2-79部分:工业和商业用高压清

洁器和蒸汽清洁器的特殊要求

Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for highpressure cleaners and steam cleaners28P;A4

IEC 60335-2-80-2002 家用和类似用途电器的安全.第2-80部分:风扇的特殊要求Household and similar electrical appliances; Safety - Part 2-80: Particular requirements for fans13P;A4

IEC 60335-2-81-2002家用和类似用途电器的安全.第2-81部分:暖脚器和加热垫

的特殊要求

Household and similar electrical appliances; Safety - Part 2-81: Particular requirements for footwarmers and heating mats21P;A4

IEC 60335-2-8-2002家用和类似用途电器的安全.第2-8部分:电动剃须刀、电推

子和类似电器的特殊要求

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements forshavers, hair clippers and similar appliances14P;A4

IEC 60335-2-82-2002家用和类似用途电器的安全.第2-82部分:服务机械和娱乐

机械的特殊要求

Household and similar electrical appliances - Safety - Part 2-82: Particular requirements foramusement machines and personal service machines19P;A4

IEC 60335-2-83-2001家用和类似用途电器的安全.第2-83部分:屋顶排水用加热

集水沟的特殊要求

Household and similar electrical appliances - Safety - Part 2-83: Particular requirements forheated gullies for roof drainage11P;A4

IEC 60335-2-84-2002 家用和类似用途电器的安全.第2-84部分:座便器的特殊要

求

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements fortoilets

IEC 60335-2-85-2002家用和类似用途电器的安全.第2-85部分:织物蒸汽熨斗的

特殊要求

Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabricsteamers13P;A4

IEC 60335-2-86-2002家用和类似用途电器.安全.第2-86部分:电动捕鱼机具的特

殊要求

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements forelectric fishing machines19P;A4

IEC 60335-2-87-2002家用和类似用途电器.安全.第2-87部分:牲畜用电昏迷设备

的特殊要求

Household and similar electrical appliances - Safety - Part 2-87: Particular requirements forelectrical animal-stunning equipment21P;A4

IEC 60335-2-88-2002家用和类似用途电器的安全.第2-88部分:加热、通风或空

调系统用加湿器的特殊要求

Household and similar electrical appliances - Safety - Part 2-88: Particular requirements forhumidifiers intended for use with heating, ventilation, or air conditioning systems18P;A4

IEC 60335-2-89-2002家用和类似电器的安全.第2-89部分: 带插入式或间接冷冻

装置或压缩机的商用致冷设备的的特殊要求

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements forcommercial refrigerating appliances with an incorporated or remote refrigerant condensing unit orcompressor71P;A4

IEC 60335-2-90-2002家用和类似电器的安全.第2-90部分:商用微波炉的特殊要

求

Household and similar electrical appliances - Safety - Part 2-90: Particular requirements forcommercial microwave ovens49P;A4

（94） 351

IEC标准目录


开本页数

IEC 60335-2-91-2002家用和类似用途电器的安全.第2-91部分:拉式手持草坪修

整机和草坪修边机的特殊要求

Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers28P;A4

IEC 60335-2-9-2002家用和类似用途电器.安全.第2-9部分:烤架、烤箱及类似便

携式灶具的特殊要求

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills,toasters and similar portable cooking appliances27P;A4

IEC 60335-2-92-2002家用和类似电器的安全.第2-92部分:脚踏控制的电源线操

作的草坪松土机和松砂机

Household and similar electrical appliances - Safety - Part 2-92: Particular requirements forpedestrian-controlled mains-operated lawn scarifiers and aerators44P;A4

IEC 60335-2-94-2002家用和类似电器的安全.第2-94部分:剪刀式剪草机的特殊

要求

Household and similar electrical appliances - Safety - Part 2-94: Particular requirements forscissors type grass shears20P;A4

IEC 60335-2-95-2002家用和类似用途电器的安全.第2-95部分:住宅用垂直移动

汽车库门驱动装置的特殊要求

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements fordrives for vertically moving garage doors for residential use19P;A4

IEC 60335-2-96-2002家用和类似用途电器.安全.第2-96部分:房间加热器用软片

型加热元件的特殊要求

Household and similar electrical appliances - Safety - Part 2-96: Particular requirements forflexible sheet heating elements for room heating71P;A4

IEC 60335-2-97-2002家用和类似用途电器的安全.第2-97部分:卷动百叶窗、遮

阳蓬、遮帘和类似设备驱动装置的特殊要求

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements fordrives for rolling shutters, awnings, blinds and similar equipment17P;A4

IEC 60335-2-98-2002家用和类似用途电器的安全.第2-98部分:加湿器的特殊要

求

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements forhumidifiers13P;A4

IEC 60335-2-99-2003家用和类似用途电器.安全.第2-99部分:商用电炉罩的特殊

要求

Household and similar electrical appliances - Safety - Part 2-99: Particular requirements forcommercial electric hoods22P;A4

IEC 60336-1993 医用诊断装置X射线管组件的焦点特性X-ray tubes assemblies for medical diagnosis; characteristics of focal spots75P;A4

IEC 60338-1970 耗量和需量的遥测仪器Telemetering for consumption and demand21P;A4

IEC 60339-1-1971一般用途的刚性同轴传输线及其连带的凸缘连接器.第1部分:一般要求和测量方法

General purpose rigid coaxial transmission lines and their associated flange connectors. Part 1 :General requirements and measuring methods23P;A4

IEC 60339-2-1996一般用途的刚性同轴传输线及其连带的凸缘连接器.第2部分:详细规格

General purpose rigid coaxial transmission lines and their associated flange connectors - Part 2:Detail specifications61P;A4

IEC 60343-1991 测定绝缘材料的表面放电击穿相应电阻的推荐试验法

Recommended test methods for determining the relative resistance of insulating materials tobreakdown by surface discharges25P;A4

（95） 351

IEC标准目录


开本页数

IEC 60344 AMD 1-1985低频电缆和电线的单一铜导体和有涂层的铜导体电阻的计算导则.第1次修改

Guide to the calculation of resistance of plain and coated copper conductors of low-frequencycables and wires

IEC 60344-1980 低频电缆和电线的单一铜导体和有涂层的铜导体电阻的计算导则

Guide to the calculation of resistance of plain and coated copper conductors of low-frequencycables and wires9P;A4

IEC 60345-1971 绝缘材料在高温下电阻和电阻率的试验方法Method of test for electrical resistance and resistivity of insulating materials at elevatedtemperatures

IEC 60347-1982 横向磁迹录像机Transverse track video recorders39P;A4

IEC 60349-1 AMD 1-2002电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子交流

器供电的交流电动机之外的旋转电机.修改1

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines otherthan electronic convertor-fed alternating current motors; Amendment 121P;A4

IEC 60349-1 Edition 1.1-2002电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子变流

器供电的交流电动机之外的旋转电机

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines otherthan electronic convertor-fed alternating current motors131P;A4

IEC 60349-1-1999电力牵引.铁路与公路车辆用旋转电机.第1部分:不同于电子

变换加速电流发动机的设备

Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines otherthan electronic convertor-fed alternating current motors131P;A4

IEC 60349-2-2002电力牵引.铁路与道路车辆用旋转电机.第2部分:电子变流器

供电的交流电动机

Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronicconvertor-fed alternating current motors69P;A4

IEC 60350-1999 家用电灶、灶台、烤炉、烤架.性能测试方法Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuringperformance71P;A4

IEC 60351-1-1976 阴极射线示波器性能的表示法.第1部分:总则Expression of the properties of cathode-ray oscilloscopes. Part 1 : General104P;A4

IEC 60351-2-1976 阴极射线示波器性能的表示法.第2部分:存储示波器Expression of the properties of cathode-ray oscilloscopes. Part 2 : Storage oscilloscopes19P;A4

IEC 60352-1-1997无焊连接.第1部分:无焊绕接.一般要求、试验方法和使用指

南

Solderless connections - Part 1: Wrapped connections - General requirements, test methods andpractical guidance61P;A4

IEC 60352-2 AMD 1-1996无焊连接.第2部分:无焊压接.一般要求、试验方法和使用指

南.修改件1

Solderless connections - Part 2: Solderless crimped connections - General requirements, testmethods and practical guidance; Amendment 155P;A4

IEC 60352-2 AMD 2-2002无钎焊连接.第2部分:无钎焊压接连接.总体要求、试验方法

和实用指南

Solderless connections - Part 2: Solderless crimped connections - General requirements, testmethods and practical guidance9P;A4

IEC 60352-2-1990无焊连接.第2部分:无焊压接.一般要求、试验方法和使用指

南

Solderless connections; part 2: solderless crimped connections; general requirements, testmethods and practical guidance83P;A4

（96） 351

IEC标准目录


开本页数

IEC 60352-3-1993无焊连接.第3部分:可接近无焊绝缘位移连接.一般要求、试

验方法和使用指南

Solderless connections; part 3: solderless accessible insulation displacement connections;general requirements, test methods and practical guidance61P;A4

IEC 60352-4 AMD 1-2000无焊连接.第4部分:不可接近无焊绝缘位移连接.一般要求、

试验方法和使用指南.修改件1

Solderless connections - Part 4: Solderless non-accessible insulation displacement connections;general requirements, test methods and practical guidance; Amendment 137P;A4

IEC 60352-4-1994无焊连接.第4部分:不可接近无焊绝缘位移连接.一般要求、

试验方法和使用指南

Solderless connections - Part 4: Solderless non-accessible insulation displacement connections -General requirements, test methods and practical guidance71P;A4

IEC 60352-5-2001无焊连接.第5部分:压入式连接.一般要求、试验方法和使用

指南

Solderless connections - Part 5: Press-in connections; General requirements, test methods andpractical guidance69P;A4

IEC 60352-6-1997无焊连接.第6部分:绝缘刺破连接.一般要求,试验方法和使

用指南

Solderless connections - Part 6: Insulation piercing connections - General requirements, testmethods and practical guidance53P;A4

IEC 60352-7-2003无焊连接.第7部分:弹簧夹件连接.一般要求、试验方法和实

施指南

Solderless connections - Part 7: Spring clamp connections; General requirements, test methodsand practical guidance60P;A4

IEC 60353-1989 交流电力系统用的线路陷波器Line traps for a.c. power systems79P;A4

IEC 60354-1991 油浸变压器负载导则Loading guide for oil-immersed power transformers157P;A4

IEC 60356-1971 换向器和滑环的尺寸Dimensions for commutators and slip-rings23P;A4

IEC 60358-1990 耦合电容器和电容式分压器Coupling capacitors and capacitor dividers81P;A4

IEC 60359-2001 电气和电子测量设备.性能表示Electrical and electronic measurement equipment - Expression of performance67P;A4

IEC 60360-1998 灯头温升的标准测量方法Standard method of measurement of lamp cap temperature rise35P;A4

IEC 60364-1-2001建筑物的电气装置.第1部分:基本原则、一般特性的评定和

定义

Electrical installations of buildings - Part 1: Fundamental principles, assessment of generalcharacteristics, definitions71P;A4

IEC 60364-4-41-2001 建筑物的电气装置.第4-41部分:安全防护.电击防护Electrical installations of buildings - Part 4-41: Protection for safety; Protection against electricshock

IEC 60364-4-42-2001 建筑物的电气装置.第42部分:安全防护.热效应的防护Electrical installations of buildings - Part 42: Protection for safety; Protection against thermaleffects

IEC 60364-4-43-2001 建筑物的电气装置.第4-43部分:安全防护.过电流的防护Electrical installations of buildings - Part 4-43: Protection for safety; Protection againstovercurrent

（97） 351

IEC标准目录


开本页数

IEC 60364-4-44-2001建筑物的电气装置.第4-44部分:安全防护.电压和电磁干扰

的防护

Electrical installations of buildings - Part 4-44: Protection for safety; Protection against voltagedisturbances and electromagnetic disturbances81P;A4

IEC 60364-4-443-1999建筑物的电气装置.第4部分:安全防护.第44章:过电压防护.第443节:由于开关导致的大气来源的过电压防护

Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection againstovervoltages - Section 443: Protection against overvoltages of atmospheric origin or due toswitching

IEC 60364-4-473-1999建筑物的电气装置.第4部分:安全防护.第47章:安全防护措

施的应用.第473节:过电流防护措施

Electrical installations of buildings - Part 4: Protection for safety - Chapter 47: Application ofprotective measures for safety - Section 473: Measures of protection against overcurrent21P;A4

IEC 60364-5-51-2001建筑物的电气装置.第5-51部分:电气设备的选择和安装.一般规则

Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment;Common rules77P;A4

IEC 60364-5-52-2001建筑物的电气设施.第5-52部分:电气设备的选择和安装.布线系统

Electrical installations of buildings - Part 5-52: Selection and erection of electrical equipment;Wiring systems127P;A4

IEC 60364-5-53 Edition 3.1-2002

建筑物的电气装置.第5-53部分:电气设备的选择和安装.绝缘、开关和控制

Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment;Isolation, switching and control71P;A4

IEC 60364-5-53-2001建筑物的电气装置.第5-53部分:电气设备的选择和安装.绝缘、开关和控制

Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment;Isolation, switching and control53P;A4

IEC 60364-5-54-2002建筑物的电气设施.第5-54部分:电气设备的选择和安装.接地措施、保护导体和保护跨接线

Electrical installations of buildings - Part 5-54: Selection and erection of electrical equipment;Earthing arrangements, protective conductors and protective bonding conductors41P;A4

IEC 60364-5-548-1999建筑物电气安装.第5部分:电气设备的安放和选择.第548部分:接地和与信息技术安装接和的设备潜能

Electrical installations of buildings - Part 5: Selection and erection of electrical equipment -Section 548: Earthing arrangements and equipotential bonding for information technologyinstallations

IEC 60364-5-55 AMD 1-2001建筑物的电气设施.第5-55部分:电气设备的选择和安装.其它设备.修改件1

Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment;Other equipment; Amendment 115P;A4

IEC 60364-5-55 Edition 1.1-2002

建筑物的电气装置.第5-55部分:电气设备的选择和安装.其它设备

Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment;Other equipment43P;A4

IEC 60364-5-55-2001建筑物的电气装置.第5-55部分:电气设备的选择和安装.其它设备

Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment;Other equipment35P;A4

IEC 60364-5-56-1999 建筑物的电气装置.第5部分:电气设备的选择和安装.第56章:安全服务

Electrical installations of buildings - Part 5: Selection and erection of electrical equipment -Chapter 56: Safety services

IEC 60364-6-61-2001 建筑物的电气装置.第6-61部分:验证.初始验证Electrical installations of buildings - Part 6-61: Verification; Initial verification57P;A4

（98） 351

IEC标准目录


开本页数

IEC 60364-7-701-1984建筑物的电气设施.第7部分:特殊设施或场所的要求.第701节:浴室内的电气设施

Electrical installations of buildings. Part 7: Requirements for special installations or locations.Section 701 - Locations containing a bath tub or shower basin17P;A4

IEC 60364-7-702-1997建筑物的电气设施.第7部分:特殊设施或场所的要求.第702节:游泳池

Electrical installations of buildings - Part 7: Requirements for special installations or locations -Section 702: Swimming pools and other basins35P;A4

IEC 60364-7-703-1984建筑物的电气设施.第7部分:特殊设施或场所的要求.第703节:蒸汽浴室加热器的连接点

Electrical installations of buildings. Part 7 : Requirements for special installations or locations.Section 703 - Locations containing sauna heaters.8P;A4

IEC 60364-7-704 AMD 1-1999建筑物的电气装置.第7部分:特殊装置和场所的要求.第704节:安装和拆除施工现场设备.补充件1

Electrical installations of buildings - Part 7: Requirements for special installations or locations -Section 704: Construction and demolition site installations; Amendment 13P;A4

IEC 60364-7-704 Edition 1.1-1999

建筑物电气安装.第7部分:特殊安装和定位的要求.第704节:建造和拆毁点的安装

Electrical installations of buildings - Part 7: Requirements for special installations or locations -Section 704: Construction and demolition site installations11P;A4

IEC 60364-7-704-1989建筑物的电气装置.第7部分:特殊装置或场所的要求.第704节:安装和拆除施工现场设备

Electrical installations of buildings; part 7: requirements for special installations or locations;section 704: construction and demolition site installations11P;A4

IEC 60364-7-705-1984建筑物的电气设施.第7部分:特殊设施或场所的要求.第705节:农艺和圆艺房屋的电气设施

Electrical installations of buildings. Part 7 : Requirements for special installations or locations.Section 705 : Electrical installations of agricultural and horticultural premises9P;A4

IEC 60364-7-706-1983建筑物的电气设施.第7部分:特殊设施或场所的要求.第706节:受限制的导电场所

Electrical installations of buildings. Part 7 : Requirements for special installations or locations.Section 706 - Restrictive conducting locations9P;A4

IEC 60364-7-707-1984建筑物的电气设施.第7部分:特殊设施或场所的要求.第707节:数据处理设备安装的接地要求

Electrical installations of buildings. Part 7 : Requirements for special installations or locations.Section 707 : Earthing requirements for the installations of data processing equipment19P;A4

IEC 60364-7-708 AMD 1-1993 第1次修改Electrical installations of buildings; part 7: requirements for special installations or locations;section 708: electrical installations in caravan parks and caravans; amendment 13P;A4

IEC 60364-7-708-1988 建筑物的电气设施.第7部分:特殊设施或场所的要求.第708节:旅居用车辆及其停车场的电气装备

Electrical installations of buildings. Part 7: Requirements for special installations or locations.Section 708 - Electrical installations in caravan parks and caravans

IEC 60364-7-709-1994建筑物的电气装置.第7部分:特殊安装和定位的要求.第709节:摩托艇码头和游艇

Electrical installations of buildings - Part 7: Requirements for special installations or locations -Section 709: Marinas and pleasure craft31P;A4

IEC 60364-7-710-2002建筑物的电气设施.第7-710部分:特殊设施或场所的要求.医疗场所

Electrical installations of buildings - Part 7-710: Requirements for special installations orlocations; Medical locations39P;A4

（99） 351

IEC标准目录


开本页数

IEC 60364-7-711-1998建筑物的电气装置.第7-711部分:特殊安装和定位的要求.展览设施,陈列设施和看台设施

Electrical installations of buildings - Part 7-711: Requirements for special installations or locations- Exhibitions, shows and stands25P;A4

IEC 60364-7-712-2002建筑物的电气装置.第7-712部分:特殊安装和定位的要求.太阳光电能源供应系统

Electrical installations of buildings - Part 7-712: Requirements for special installations orlocations; Solar photovoltaic (PV) power supply systems23P;A4

IEC 60364-7-713-1996建筑物的电气装置.第7部分:特殊装置和场所的要求.第713节:设施

Electrical installations of buildings - Part 7: Requirements for special installations and locations -Section 713: Furniture13P;A4

IEC 60364-7-714-1996建筑物的电气装置.第7部分:特殊装置和场所的要求.第714节:外部照明装置

Electrical installations of buildings - Part 7: Requirements for special installations or locations -Section 714: External lighting installations15P;A4

IEC 60364-7-715-1999建筑物电气装置.第7-715部分:特殊装置和定位的要求.超低

压照明装置

Electrical installations of buildings - Part 7-715: Requirements for special installations or locations- Extra-low-voltage ligthing installations17P;A4

IEC 60364-7-717-2001建筑物的电气设施.第7-717部分:特殊设施或场所的要求.移动或便携式装置

Electrical installations of buildings - Part 7-717: Requirements for special installations orlocations; Mobile or transportable units33P;A4

IEC 60364-7-740-2000建筑物的电气设施.第7-740部分:特殊设施或场所的要求.集市场所、娱乐场和马戏场上的建筑物、娱乐设施和临时构筑物的临时电气装置

Electrical installations of buildings - Part 7-740: Requirements for special installations orlocations; Temporary electrical installations for structures, amusement devices and booths atfairgrounds, amusement parks and circuses23P;A4

IEC 60367-1 AMD 1-1984 用于电信的电感器和变压器用磁芯.第1部分:测量方法.第1 Cores for inductors and transformers for telecommunications. Part 1 : Measuring methods

IEC 60367-1 AMD 2-1992 第2次修改Cores for inductors and transformers for telecommunications; part 1: measuring methods;amendment 29P;A4

IEC 60367-2 AMD 1-1983用于电信的电感器和变压器用磁芯.第2部分:起草性能规范

的导则.第1次修改

Cores for inductors and transformers for telecommunications. Part 2 : Guides for the drafting ofperformance specifications

IEC 60367-2-1974用于电信的电感器和变压器用磁芯.第2部分:起草性能规范

的导则

Cores for inductors and transformers for telecommunications. Part 2 : Guides for the drafting ofperformance specifications27P;A4

IEC 60367-2A-1976 第1次补充Cores for inductors and transformers for telecommunications. Part 2 : Guides for the drafting ofperformance specifications.13P;A4

IEC 60368-1-2000 经质量评定的压电滤波器.第1部分:一般规范Piezoelectric filters of assessed quality - Part 1: Generic specification67P;A4

IEC 60368-2-1-1988 压电滤波器.第2部分:压电滤波器使用指南.第1节:石英晶体 Piezoelectric filters. Part 2: Guide to the use of piezoelectric filters. Section One - Quartz crystal

IEC 60368-2-2-1996压电滤波器.第2部分:压电滤波器应用指南.第2节:压电陶瓷

滤波器

Piezoelectric filters - Part 2: Guide to the use of piezoelectric filters - Section 2: Piezoelectricceramic filters45P;A4

（100） 351

IEC标准目录


开本页数

IEC 60368-3-2001 经质量评定的压电滤波器.第3部分:标准外形和导线连接Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections37P;A4

IEC 60368-4-1-2000 经质量评定的压电滤波器.第4-1部分:空白详细规范.能力鉴

定

Piezoelectric filters of assessed quality - Part 4-1: Blank detail specification; Capability approval21P;A4

IEC 60368-4-2000 质量评定的压电滤波器.第4部分:分规范.能力鉴定 Piezoelectric filters of assessed quality - Part 4: Sectional specification; Capability approval

IEC 60369-1971 家用和类似用途地板擦光机性能的测量方法Methods for measuring performance of floor polishers for household and similar purposes33P;A4

IEC 60370-1971 绝缘漆耐热性试验规程.电气强度法Test procedure for thermal endurance of insulating varnishes - Electric strength method18P;A4

IEC 60371-1-1980 云母基绝缘材料规范.第1部分:定义和一般要求Specification for insulating materials based on mica. Part 1 : Definitions and generalrequirements

IEC 60371-2 AMD 1-1994 以云母为基材的绝缘材料规范.第2部分:试验方法.补充件1Specification for insulating materials based on mica - Part 2: Methods of test; Amendment 15P;A4

IEC 60371-2-1987 云母基绝缘材料规范.第2部分:试验方法Specification for insulating materials based on mica. Part 2 : Methods of test45P;A4

IEC 60371-3-1-1984云母基绝缘材料规范.第3部分:单项材料规范.第1活页:换向

器隔板和材料

Specification for insulating materials based on mica. Part 3 : Specifications for individualmaterials. Sheet 1 : Commutator separators and materials15P;A4

IEC 60371-3-2-1991云母基绝缘材料规范.第3部分:单项材料规范.第2活页:云母

纸

Specification for insulating materials based on mica; part 3: specifications for indvidual materials;sheet 2: mica paper20P;A4

IEC 60371-3-3-1983云母基绝缘材料规范.第3部分:单项材料规范.第3活页:加热

设备用硬质云母材料

Specification for insulating materials based on mica. Part 3 : Specifications for individualmaterials. Sheet 3: Specification for rigid mica materials for heating equipment9P;A4

IEC 60371-3-4-1992云母基绝缘材料规范.第3部分:单项材料规范.第4活页:用B级环氧树脂粘合剂粘结的聚酯薄膜衬底云母纸

Specification for insulating materials based on mica; part 3: specifications for individual materials;sheet 4: polyester film-backed mica paper with a B-stage epoxy resin binder19P;A4

IEC 60371-3-5-1992云母基绝缘材料规范.第3部分:单项材料规范.第5活页:用环

氧树脂粘合剂粘结的待浸渍处理的玻璃纤维织物衬底云母纸

Specification for insulating materials based on mica; part 3: specifications for individual materials;sheet 5: glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)19P;A4

IEC 60371-3-6-1992云母基绝缘材料规范.第3部分:单项材料规范.第6活页:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸

Specification for insulating materials based on mica; part 3: specifications for individual materials;sheet 6: glass-backed mica paper with a B-stage epoxy resin binder21P;A4

IEC 60371-3-7-1995云母基绝缘材料.第3部分:单项材料规范.第7活页:单导体胶

带用带有环氧树脂的聚脂薄膜云母纸

Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7:Polyester film mica paper with an epoxy resin binder for single conductor taping13P;A4

IEC 60371-3-8-1995云母基绝缘材料规范.第3部分:单项材料规范.第8活页:耐火

安全电缆用云母纸带

Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Micapaper tapes for flame-resistant security cables18P;A4

（101） 351

IEC标准目录


开本页数

IEC 60371-3-9-1995云母基绝缘材料规范.第3部分:单项材料规范.第9活页:模制

胶合云母板

Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9:Moulding micanite15P;A4

IEC 60372 AMD 1-1991 第1次修改Locking devices for ball and socket couplings of string insulator units; dimensions and tests;amendment 16P;A4

IEC 60372-1984 绝缘子串元件球窝连接用锁紧销.尺寸和试验Locking devices for ball and socket couplings of string insulator units. Dimensions and tests25P;A4

IEC 60373-1990 骨传振动器测量用机械耦合器Mechanical coupler for measurements on bone vibrators25P;A4

IEC 60374-1971 选择波导元件模数尺寸的导则Guide for choosing modular dimensions for waveguide components8P;A4

IEC 60375-1972 有关电路和磁路的惯用规定Conventions concerning electric and magnetic circuits55P;A4

IEC 60376-1971 新六氟化硫的规格和验收Specification and acceptance of new sulphur hexafluoride43P;A4

IEC 60376A-1973 第1次补充Specification and acceptance of new sulphur hexafluoride. First supplement: Section Thirteen:Mineral oil content15P;A4

IEC 60376B-1974 第2次补充Specification and acceptance of new sulphur hexafluoride. Second supplement: Clause 2617P;A4

IEC 60377-1-1973绝缘材料在300MHz以上频率下介电性能测定方法.第1部分:总则

Methods for the determination of the dielectric properties of insulating materials at frequenciesabove 300 MHz. Part 1 : General25P;A4

IEC 60377-2-1977绝缘材料在300MHz以上频率下介电性能测定方法.第2部分:谐振法

Methods for the determination of the dielectric properties of insulating materials at frequenciesabove 300 MHz. Part 2 : Resonance methods38P;A4

IEC 60379-1987 家用电热水器性能测量方法Methods for measuring the performance of electrical water-heaters for household purposes23P;A4

IEC 60381-1-1982 过程控制系统用模拟信号.第1部分:直流电流信号Analogue signals for process control systems. Part 1 : Direct current signals9P;A4

IEC 60381-2-1978 过程控制系统用模拟信号.第2部分:直流电压信号 Analogue signals for process control systems. Part 2 : Direct voltage signals

IEC 60382-1991 过程控制系统用模拟气动信号Analogue pneumatic signal for process control systems9P;A4

IEC 60383-1-1993公称电压高于1000V的架空线路用绝缘子.第1部分:交流系

统用陶瓷或玻璃绝缘子的定义、试验方法和验收要求

Insulators for overhead lines with nominal voltage above 1000 V; part 1: ceramic or glassinsulator units for a.c. systems; definitions, test methods and acceptance criteria111P;A4

IEC 60383-2-1993公称电压高于1000V的架空线路用绝缘子.第2部分:交流电

路系统绝缘子串和绝缘子装置.试验方法和验收指标

Insulators for overhead lines with a nominal voltage above 1000 V; part 2: insulator strings andinsulator sets for a.c. systems; definitions, test methods and acceptance criteria23P;A4

（102） 351

IEC标准目录


开本页数

IEC 60384-10 AMD 1-1993电子设备用固定电容器.第10部分:分规范:固定多层陶瓷片

电容器.第1次修改

Fixed capacitors for use in electronic equipment; part 10: sectional specification: fixed multilayerceramic chips capacitors; amendment 13P;A4

IEC 60384-10 AMD 2-2000电子设备用固定电容器.第10部分:分规范:固定式多层瓷片

电容器.修改件2Fixed capacitors for use in electronic equipment - Part 10: Sectional specification: Fixedmultilayer ceramic chip capacitors; Amendment 2

IEC 60384-10-1 AMD 1-1993 第1次修改Fixed capacitors for use in electronic equipment; part 10: blank detail specification: fixedmultilayer ceramic chips capacitors; assessment level E; amendment 13P;A4

IEC 60384-10-1-1989电子设备用固定电容器.第10部分:空白详细规范:固定式多

层陶瓷片电容器.第1节:E级评定

Fixed capacitors for use in electronic equipment; part 10: blank detail specification; fixedmultilayer ceramic chip capacitors; assessment level E23P;A4

IEC 60384-10-1989电子设备用固定电容器.第10部分:分规范:固定式多层瓷片

电容器

Fixed capacitors for use in electronic equipment; part 10: sectional specification: fixed multilayerceramic chip capacitors87P;A4

IEC 60384-11-1-1988电子设备用固定电容器.第11部分:空白详细规范:固定聚乙

烯-对苯二酸酯薄膜介质金属箔直流电容器.第1节:E级评定

Fixed capacitors for use in electronic equipment; part 11: blank detail specification; fixedpolyethylene-terephthalate film dielectric metal foil d.c. capacitors; assessment level E27P;A4

IEC 60384-11-1988电子设备用固定电容器.第11部分:分规范:固定聚乙烯-对苯

二酸酯薄膜介质金属箔直流电容器

Fixed capacitors for use in electronic equipment; part 11: sectional specification; fixedpolyethylene-terephthalate film dielectric metal foil d.c. capacitors55P;A4

IEC 60384-1-1999 电子设备用固定电容器.第1部分:总规范.Fixed capacitors for use in electronic equipment - Part 1: Generic specification137P;A4

IEC 60384-12-1-1988电子设备用固定电容器.第12部分:空白详细规范:金属箔式

聚碳酸酯薄膜介质直流固定电容器.第1节:E级评定

Fixed capacitors for use in electronic equipment; part 12: blank detail specification; fixedpolycarbonate film dielectric metal foil d.c. capacitors; assessment level E27P;A4

IEC 60384-12-1988电子设备用固定电容器.第12部分:分规范:固定聚碳酸酯薄

膜介质金属箔直流电容器

Fixed capacitors for use in electronic equipment; part 12; sectional specification; fixedpolycarbonate film dielectric metal foil d.c. capacitors55P;A4

IEC 60384-13-1-1991电子设备用固定电容器.第13部分:空白详细规范:固定聚苯

乙烯薄膜绝缘金属箔直流电容器.第1节:E级评定

Fixed capacitors for use in electronic equipment; part 13: blank detail specification; fixedpolypropylene film dielectric metal foil d.c. capacitors; assessment level E25P;A4

IEC 60384-13-1991电子设备用固定电容器.第13部分:分规范:固定聚苯乙烯薄

膜绝缘金属箔直流电容器

Fixed capacitors for use in electronic equipment; part 13: sectional specification; fixedpolypropylene film dielectric metal foil d.c. capacitors57P;A4

IEC 60384-14 AMD 1-1995电气设备用固定电容器.第14部分:分规范:抑制电磁干扰固

定电容器和与电源连接.第1次修改

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification: Fixedcapacitors for electromagnetic interference suppression and connection to the supply mains;Amendment 1

IEC 60384-14-1-1993电子设备用固定电容器.第14部分:空白详细规范:抑制电磁

干扰固定式电容器和与电源连接.D级评定

Fixed capacitors for use in electronic equipment; part 14: blank detail specification: fixedcapacitors for electromagnetic interference suppression and connection to the supply mains;assessment level D

（103） 351

IEC标准目录


开本页数

IEC 60384-14-1993电子设备用固定电容器.第14部分:分规范:抑制电磁干扰固

定式电容器和与电源连接

Fixed capacitors for use in electronic equipment; part 14: sectional specification: fixed capacitorsfor electromagnetic interference suppression and connection to the supply mains109P;A4

IEC 60384-15 AMD 1-1987 第1次修改Fixed capacitors for use in electronic equipment. Part 15 : Sectional specification : Fixedtantalum capacitors with non-solid or solid electrolyte

IEC 60384-15 AMD 2-1992电子设备用固定电容器.第15部分:分规范:固态和非固态电

解的固定式钽质电容器.第2次修改

Fixed capacitors for use in electronic equipment; part 15: sectional specification: fixed tantalumcapacitors with non-solid or solid electrolyte; amendment 27P;A4

IEC 60384-15-1-1984电子设备用固定电容器.第15部分:分规范:固体或非固体电

解质固定钽电容器.第1节:空白详细规范:非固体电解质和箔

电极的固定钽电容器.E级评定

Fixed capacitors for use in electronic equipment. Part 15 : Sectional specification : Fixedtantalum capacitors with non-solid or solid electrolyte. Blank detail specification : Fixed tantalumcapacitors with non-solid electrolyte and foil electrode. Assessment level E27P;A4

IEC 60384-15-1982电子设备用固定电容器.第15部分:分规范:固体或非固体电

解质固定钽电容器

Fixed capacitors for use in electronic equipment. Part 15 : Sectional specification : Fixedtantalum capacitors with non-solid or solid electrolyte59P;A4


解质固定钽电容器.第2节:空白详细规范:非固体电解质和多

孔阳极的固定钽电容器.E级评定

Fixed capacitors for use in electronic equipment. Part 15 : Sectional specification : Fixedtantalum capacitors with non-solid or solid electrolyte. Blank detail specification : Fixed tantalumcapacitors with non-solid electrolyte and porous anode. Assessment level E.27P;A4

IEC 60384-15-3 AMD 1-1992 第1次修改Fixed capacitors for use in electronic equipment; part 15: blank detail specification: fixed tantalumcapacitors with solid and porous anode; assessment level E; amendment 13P;A4


解质固定钽电容器.第3节:空白详细规范:固体电解质和多孔

阳极固定钽电容器.E级评定

Fixed capacitors for use in electronic equipment. Part 15 : Sectional specification : Fixedtantalum capacitors with non-solid or solid electrolyte. Blank detail specification : Fixed tantalumcapacitors with solid electrolyte and and porous anode. Assessment level E27P;A4

IEC 60384-16 AMD 1-1987 第1次修改Fixed capacitors for use in electronic equipment. Part 16 : Sectional specification: Fixedmetallized polypropylene film dielectric d.c. capacitors

IEC 60384-16 AMD 2-1992 第2次修改Fixed capacitors for use in electronic equipment; part 16: sectional specification: fixed metallizedpolypropylene film dielectric d.c. capacitors; amendment 25P;A4

IEC 60384-16-1 AMD 1-1987 第1次修改Fixed capacitors for use in electronic equipment. Part 16 : Sectional specification: Fixedmetallized polypropylene film dielectric d.c. capacitors. Blank detail specification: Fixed metallizedpolypropylene film dielectric d.c. capacitors. Assessment level E

IEC 60384-16-1-1982电子设备用固定电容器.第16部分:分规范:金属化聚丙烯薄

膜介质直流固定电容器.第1节:空白详细规范:固定式金属化

聚丙烯薄膜介质直流电容器.E级评定

Fixed capacitors for use in electronic equipment. Part 16 : Sectional specification: Fixedmetallized polypropylene film dielectric d.c. capacitors. Blank detail specification: Fixed metallizedpolypropylene film dielectric d.c. capacitors. Assessment level E21P;A4

（104） 351

IEC标准目录


开本页数

IEC 60384-16-1982电子设备用固定电容器.第16部分:分规范:金属化聚丙烯薄

膜介质直流固定电容器

Fixed capacitors for use in electronic equipment. Part 16 : Sectional specification: Fixedmetallized polypropylene film dielectric d.c. capacitors51P;A4

IEC 60384-17-1-1987电子设备用固定电容器.第17部分:分规范:固定金属化聚丙

烯薄膜介质交流和脉冲电容器.第1节:空白详细规范:固定金

属化聚丙烯薄膜介质交流和脉冲电容器.E级评定

Fixed capacitors for use in electronic equipment; part 17: blank detail specification; fixedmetallized polypropylene film dielectric a.c. and pulse capacitors; assessment level E29P;A4

IEC 60384-17-1987电子设备用固定电容器.第17部分:分规范.固定金属化聚丙

烯薄膜介质交流和脉冲电容器

Fixed capacitors for use in electronic equipment; part 17: sectional specification; fixed metallizedpolypropylene film dielectric a.c. and pulse capacitors55P;A4

IEC 60384-18 AMD 1-1998电子设备用固定电容器.第18部分:有固体电介质的固定铝

电解质芯片电容器分规范.第1次修订

Fixed capacitors for use in electronic equipment - Part 18: Sectional specification: Fixedaluminium electrolytic chip capacitors with solid and non-solid electrolyte; Amendment 17P;A4

IEC 60384-18-1 AMD 1-1998电子设备用固定电容器.第18部分:有固体电介质的固定铝

电解质芯片电容器分规范.第1节:E级评定.第1次修订

Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification: Fixedaluminium electrolytic chip capacitors with solid electrolyte - Assessment level E; Amendment 15P;A4

IEC 60384-18-1-1993电子设备用固定电容器.第18部分:有固体电介质的固定铝

电解质芯片电容器分规范.第1节:E级评定

Fixed capacitors for use in electronic equipment; part 18: sectional specification: fixed aluminiumelectrolytic chip capacitors with solid electrolyte; assessment level E29P;A4

IEC 60384-18-1993电子设备用固定电容器.第18部分:有固体电解质和非固体

电解质的固定铝解质芯片电容器.分规范

Fixed capacitors for use in electronic equipment; part 18: sectional specification: fixed aluminiumelectrolytic chip capacitors with solid and non-solid electrolyte65P;A4

IEC 60384-18-2-1993电子设备用固定电容器.第18部分:有非固体电介质的固定

铝电解质芯片电容器分规范.第2节:E级评定

Fixed capacitors for use in electronic equipment; part 18: sectional specification: fixed aluminiumelectrolytic chip capacitors with non-solid electrolyte; assessment level E31P;A4

IEC 60384-19-1-1993电子设备用固定电容器.第19部分:空白详细规范:覆金属聚

对苯二甲酸乙酯薄膜介质芯张式直流固定电容器.E级评定

Fixed capacitors for use in electronic equipment; part 19: blank detail specification: fixedmetallized polyethylene-terephthalate film dielectric chip d.c. capacitors; assessment level E25P;A4

IEC 60384-19-1993电子设备用固定电容器.第19部分:覆金属聚对苯二甲酸乙

酯薄膜介质芯张式直流固定电容器

Fixed capacitors for use in electronic equipment; part 19: sectional specification: fixed metallizedpolyethylene-terephthalate film dielectric chip d.c. capacitors53P;A4

IEC 60384-2 AMD 1-1987电子设备用固定电容器.第2部分:分规范:金属化聚乙烯对苯

二甲酸乙二酸酯薄膜介质直流固定电容器.第1次修改

Fixed capacitors for use in electronic equipment. Part 2 : Sectional specification: Fixed metallizedpolyethyleneterephthalate film dielectric d.c. capacitors

IEC 60384-2 AMD 2-1992 第2次修改

Fixed capacitors for use in electronic equipment; part 2: blank detail specification: fixedmetallized polyethylene-terephthalate film dielectric d.c. capacitors; assessment level E;amendment 2

IEC 60384-20-1-1996电子设备用固定电容器.第20-1部分:空白详细规范:金属化

聚苯硫醚膜介质直流片式固定电容器.评定水平EZ

Fixed capacitors for use in electronic equipment - Part 20: Blank detail specification: Fixedmetallized polyphenylene sulfide film dielectric chip d.c. capacitors - Assessment level EZ29P;A4

（105） 351

IEC标准目录


开本页数

IEC 60384-20-1996电子设备用固定电容器.第20部分:分规范:金属化金属化聚

苯硫醚膜介质直流片式固定电容器

Fixed capacitors for use in electronic equipment - Part 20: Sectional specification: Fixedmetallized polyphenylene sulfide film dielectric chip d.c. capacitors57P;A4

IEC 60384-2-1 AMD 1-1987

电子设备用固定电容器.第2部分:分规范:金属化聚乙烯对苯

二甲酸乙二酸酯薄膜介质直流固定电容器.第1节:空白详细

规范:金属化聚乙烯对苯二甲酸乙二酸酯薄膜介质直流固定

电容器.E级评定.第1次修改

Fixed capacitors for use in electronic equipment. Part 2: Blank detail specification: Fixedmetallized polyethyleneterephthalate film dielectric d.c. capacitors, Assessment Level E5P;A4

IEC 60384-2-1-1982电子设备用固定电容器.第2部分:分规范:金属化聚乙烯对苯

二甲酸乙二酸酯薄膜介质直流固定电容器.第1节:空白详细

规范:金属化聚乙烯对苯二甲酸乙二酸酯薄膜介质直流固定

Fixed capacitors for use in electronic equipment. Part 2: Blank detail specification: Fixedmetallized polyethylene-terephthalate film dielectric d.c. capacitors. Assessment Level E21P;A4

IEC 60384-2-1982电子设备用固定电容器.第2部分:分规范:金属化聚乙烯对苯

二甲酸乙二酸酯薄膜介质直流固定电容器

Fixed capacitors for use in electronic equipment. Part 2 : Sectional specification: Fixed metallizedpolyethyleneterephthalate film dielectric d.c. capacitors.51P;A4

IEC 60384-3-101-1995电子设备用固定电容器.第3-10部分:详细规范:带有固体电

解质和多孔阳极的表面安装用固定钽片式电容器.类型I-评估水准E

Fixed capacitors for use in electronic equipment - Part 3-101: Detail specification: Fixed tantalumchip capacitors for surface mounting with solid electrolyte and porous anode, style I -Assessment level E

IEC 60384-3-1-1989电子设备用固定电容器.第3部分:分规范:固定式钽片电容

器.第1节:空白详细规范:固定式钽片电容器.E级评定

Fixed capacitors for use in electronic equipment; part 3: Blank detail specification: fixed tantalumchip capacitors; assessment level E29P;A4

IEC 60384-3-1989 电子设备用固定电容器.第3部分:分规范:固定式钽片电容器Fixed capacitors for use in electronic equipment; part 3: sectional specification; fixed tantalumchip capacitors53P;A4

IEC 60384-4 AMD 1-2000电子设备用固定电容器.第4部分:分规范.有固态和非固态电

解质的铝电解电容器的分规范.修改件1

Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminiumelectrolytic capacitors with solid and non-solid electrolyte; Amendment 13P;A4

IEC 60384-4-1-2000电子设备用固定电容器.第4部分:空白详细规范:非固态电解

的铝质电解电容器.评定等级E

Fixed capacitors for use in electronic equipment - Part 4: Blank detail specification - Aluminiumelectrolytic capacitors with non-solid electrolyte; Assessment level E15P;A4

IEC 60384-4-1998电子设备用固定电容器.第4部分:分规范.有固态和非固态电

解质的铝电解电容器的分规范

Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminiumelectrolytic capacitors with solid and non-solid electrolyte67P;A4

IEC 60384-4-2 AMD 1-1992 第1次修改Fixed capacitors for use in electronic equipment; part 4: blank detail specification: aluminiumelectrolytic capacitors with solid electrolyte; assessment level E; amendment 13P;A4

IEC 60384-4-2 AMD 2-1996电子设备用固定电容器.第4部分:空白详细规范:含有固态电

解质的铝电解质电容器.评定等级E.补充件2

Fixed capacitors for use in electronic equipment - Part 4: Blank detail specification: Aluminiumelectrolyte capacitors with solid electrolyte - Assessment level E; Amendment 23P;A4

（106） 351

IEC标准目录


开本页数

IEC 60384-4-2-1985电子设备用固定电容器.第4部分:分规范:固体或非固体电解

质铝电解电容器.第2节:空白详细规范:固体电解质铝电解电

容器.E级评定

Fixed capacitors for use in electronic equipment. Part 4 : Sectional specification : Aluminiumelectrolytic capacitors with solid or non-solid electrolyte. Selection of methods of test and generalrequirements. Blank detail specification: Aluminium electrolyte capacitors with solid electrolyte.Assessment level E

IEC 60384-5-1-1993电子设备用固定电容器.第5部分:额定电压不超过3000V的固定式直流云母电容器.第1节:E级评定

Fixed capacitors for use in electronic equipment; part 5: blank detail specification: fixed micadielectric d.c. capacitors with a rated voltage not exceeding 3000 V; assessment level E25P;A4

IEC 60384-5-1993电子设备用固定电容器.第5部分:分规范:额定电压不超过

3000V的固定式直流云母电容器.试验方法的选择和一般要

求

Fixed capacitors for use in electronic equipment; part 5: sectional specification: fixed micadielectric d.c. capacitors with a rated voltage not exceeding 3000 V; selection of methods of testand general requirements59P;A4

IEC 60384-6 AMD 1-1992 第1次修改Fixed capacitors for use in electronic equipment; part 6: sectional specification: fixed metallizedpolycarbonate film dielectric d.c. capacitors; amendment 15P;A4

IEC 60384-6-1-1987电子设备用固定电容器.第6部分:分规范:固定金属化聚碳酸

酯薄膜介质直流电容器.第1节:空白详细规范:固定金属化聚

碳酸酯薄膜介质直流电容器.E级评定

Fixed capacitors for use in electronic equipment. Part 6 : Blank detail specification. Fixedmetallized polycarbonate film dielectric d.c. capacitors. Assessment level E21P;A4

IEC 60384-6-1987电子设备用固定电容器.第6部分:分规范:固定金属化聚碳酸

酯薄膜介质直流电容器

Fixed capacitors for use in electronic equipment. Part 6 : Sectional specification. Fixed metallizedpolycarbonate film dielectric d.c. capacitors51P;A4

IEC 60384-7-1-1991电子设备用固定电容器.第7部分:空白详细规范:固定聚苯乙

烯薄膜绝缘金属箔直流电容器.第1节:E级评定

Fixed capacitors for use in electronic equipment; part 7: blank detail specification for fixedpolystyrene film dielectric metal foil d.c. capacitors; assessment level E27P;A4

IEC 60384-7-1991电子设备用固定电容器.第7部分:分规范:固定聚苯乙烯薄膜

绝缘金属箔直流电容器

Fixed capacitors for use in electronic equipment; part 7: sectional specification; fixed polystyrenefilm dielectric metal foil d.c. capacitors64P;A4

IEC 60384-8 AMD 1-1993 第1次修改Fixed capacitors for use in electronic equipment; part 8: sectional specification: fixed capacitorsof ceramic dielectric class 1; amendment 13P;A4

IEC 60384-8 AMD 2-2000电子设备用固定电容器.第8部分:分规范.陶瓷电介质1级固

定电容器.修改件2

Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitorsof ceramic dielectric, class 1; Amendment 24P;A4

IEC 60384-8-1 AMD 1-1993 第1次修改Fixed capacitors for use in electronic equipment; part 8: blank detail specification: fixedcapacitors of ceramic dielectric class 1; assessment level E; amendment 13P;A4

IEC 60384-8-1 AMD 2-2000电子设备用固定电容器.第8部分:空白详细规范.陶瓷介质的

固定电容器.1级.评价级E.修改件2Fixed capacitors for use in electronic equipment - Part 8: Blank detail specification: Fixedcapacitors of ceramic dielectric, class 1; Assessment level E; Amendment 2

IEC 60384-8-1-1988电子设备用固定电容器.第8部分:空白详细规范:1类陶瓷介

质固定电容器.第1节:E级评定

Fixed capacitors for use in electronic equipment. Part 8: Blank detail specification: Fixedcapacitors of ceramic dielectric class 1. Assessment level E

（107） 351

IEC标准目录


开本页数

IEC 60384-8-1988电子设备用固定电容器.第8部分:分规范:1类陶瓷介质固定

电容器

Fixed capacitors for use in electronic equipment; part 8: sectional specification: fixed capacitorsof ceramic dielectric, class 178P;A4

IEC 60384-9 AMD 1-2000电子设备用固定电容器.第9部分:分规范.陶瓷介质的固定电

容器.2级.评价级E.修改件1Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitorsof ceramic dielectric, Class 2; Amendment 1

IEC 60384-9-1-1988电子设备用固定电容器.第9部分:分规范:第2类陶瓷介质固

定电容器.试验方法的选择和一般要求.第1节:空白详细规

范:第2类陶瓷介质固定电容器.E级评定

Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification - Fixedcapacitors of ceramic dielectric class 2. Assessement level E

IEC 60384-9-1988电子设备用固定电容器.第9部分:分规范:第2类陶瓷介质固

定电容器.试验方法的选择和一般要求

Fixed capacitors for use in electronic equipment.. Part 9: Sectional specification: Fixed capacitorsof ceramic dielectric, Class 2. Selection of methods of test and general requirements

IEC 60386 AMD 1-1988 第1次修改 Method of measurement of speed fluctuations in sound recording and reproducing equipment

IEC 60386-1972 录音和放音设备速度波动的测量方法Method of measurement of speed fluctuations in sound recording and reproducing equipment19P;A4

IEC 60387-1992 交流电量表的符号Symbols for alternating-current electricity meters35P;A4

IEC 60388-1-1972用于电信设备和采用类似技术的电子用品方面的热时间延迟开关.第1部分:一般要求和测量方法

Thermal time delay switches for use in equipment for telecommunication and in electronicapplications employing similar techniques. Part 1: General requirements and measuring methods45P;A4

IEC 60389-1 AMD 1-1976主要用于通信设备和采用类似技术的电子用品方面的恒温开关.第1次修改

Thermostatic switches primarily for use in equipment for telecommunications and in electronicapplications employing similar techniques. Part 1 : General requirements and measuring

IEC 60389-1-1972 主要用于通信设备和采用类似技术的电子用品方面的恒温开关

Thermostatic switches primarily for use in equipment for telecommunications and in electronicapplications employing similar techniques. Part 1 : General requirements and measuringmethods

IEC 60390 AMD 1-1976 手动电子元件的轴端尺寸.第1次修改 Dimensions of spindle ends for manually operated electronic components

IEC 60390-1972 手动电子元件的轴端尺寸Dimensions of spindle ends for manually operated electronic components25P;A4

IEC 60390A-1976 第1次补充Dimensions of spindle ends for manually operated electronic components.21P;A4

IEC 60392-1972 起草微波铁氧体规范的导则Guide for the drafting of specifications for microwave ferrites9P;A4

IEC 60393-1 AMD 1-1992 用于电子设备的电势计;第1部分:一般规范.第1次修改Potentiometers for use in electronic equipment; part 1: generic specification; amendment 123P;A4

IEC 60393-1-1989 电子设备使用的电位器.第1部分:通用规范Potentiometers for use in electronic equipment; part 1: generic specification175P;A4

IEC 60393-2-101-1994电子设备使用的电位器.第2部分:详细规范.螺杆操纵的预置

电位器.稳定级5％.评定级E

Potentiometers for use in electronic equipment - Part 2: Detail specification: Lead-screw actuatedpreset potentiometers - Stability class 5% - Assessment level E33P;A4

（108） 351

IEC标准目录


开本页数

IEC 60393-2-1-1989电子设备使用的电位器.第2部分:空白详细规范.第1节:螺杆

驱动和旋转预调电位器.E级评定

Potentiometers for use in electronic equipment; part 2: blank detail specification: lead-screwactuated and rotary preset potentiometers; assessment level E37P;A4

IEC 60393-2-1989电子设备使用的电位器.第2部分:分规范:螺杆驱动和旋转预

调电位器

Potentiometers for use in electronic equipment; part 2: sectional specification; lead-screwactuated and rotary preset potentiometers55P;A4

IEC 60393-2-2-1992电子设备使用的电位器.第2部分:空白详细规范.第2节:丝杆

驱动和旋转预调电位器.F级评定

Potentiometers for use in electronic equipment; part 2: blank detail specification: lead-screwactuated and rotary preset potentiometers; assessment level F31P;A4

IEC 60393-3-1-1992电子设备使用的电位器.第3部分第1节:空白详细规范.旋转

精密电位器.E级评定

Potentiometers for use in electronic equipment; part 3: blank detail specification: rotary precisionpotentiometers; assessment level E41P;A4

IEC 60393-3-1992 电子设备使用的电位器.第3部分:分规范:旋转精密电位器Potentiometers for use in electronic equipment; part 3: sectional specification: rotary precisionpotentiometers63P;A4

IEC 60393-4-1-1992电子设备使用的电位器.第4部分第1节:空白详细规范:单圈

旋转式功率电位器.E级评定

Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turnrotary power potentiometers; assessment level E33P;A4

IEC 60393-4-1992电子设备使用的电位器.第4部分:分规范:单圈旋转式功率电

位器

Potentiometers for use in electronic equipment; part 4: sectional specification: single-turn rotarypower potentiometers51P;A4


旋转式功率电位器.F级评定

Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turnrotary power potentiometers; assessment level F33P;A4


旋转式低功率电位器.E级评定

Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turnrotary low-power potentiometers; assessment level E43P;A4

IEC 60393-5-1992电子设备使用的电位器.第5部分:分规范:单圈旋转式线绕和

非线绕低功率电位器

Potentiometers for use in electronic equipment; part 5: sectional specification: single-turn rotarylow-power wirewound and non-wirewound potentiometers63P;A4


旋转式低功率电位器.F级评定

Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turnrotary low-power potentiometers; assessment level F37P;A4

IEC 60394-1-1972 电工用浸漆织物.第1部分:定义和一般要求Varnished fabrics for electrical purposes. Part 1 : Definitions and general requirements9P;A4

IEC 60394-2-1972 电工用浸漆织物.第2部分:试验方法Varnished fabrics for electrical purposes. Part 2 : Methods of test24P;A4

IEC 60394-3-1-1976电工用浸漆织物.第3部分:单项材料规范.第1活页:油性树脂

漆浸渍棉织物

Varnished fabrics for electrical purposes. Part 3 : Specifications for individual materials. Sheet 1:Oleoresinous varnish-cotton base, OR/C9P;A4

（109） 351

IEC标准目录


开本页数

IEC 60394-3-2-1988电工用浸漆织物.第3部分:单项材料规范.第2活页:用环氧树

脂、聚氨基甲酸乙酯、有机硅树脂、聚酯、沥青或油性树脂清漆浸渍的玻璃纤维基织物

Varnished fabrics for electrical purposes. Part 3: Specifications for individual materials. Sheet 2 :Glass-fibre based varnished fabrics with epoxy, polyurethane, silicone, polyester, bituminous oroleoresinous varnish.

IEC 60396-1991 槽式感应炉的试验方法Test methods for induction channel furnaces27P;A4

IEC 60397-1994 有金属加热电阻的间歇生产炉的试验方法Test methods for batch furnaces with metallic heating resistors35P;A4

IEC 60398-1999 工业电热安装.一般试验方法Industrial electroheating installations - General test methods25P;A4

IEC 60399 AMD 1-1997 带灯罩座的E14和E27灯座柱筒螺纹活页标准.补充件1Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring;Amendment 1

IEC 60399 AMD 2-1999 E14和E27带底座环的灯座用柱螺纹的活页标准.修改件2Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring;Amendment 2

IEC 60399 Edition 1.2-2002 带灯罩座环的E14和E27灯座园筒尾端螺纹用标准活页Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring7P;A4

IEC 60399-1972 带灯罩座环的E14和E27灯座柱筒螺纹用标准活页Standard sheets for barrel thread for E14 and E27 lampholders with shade holder ring7P;A4

IEC 60400 AMD 1-2002 管形荧光灯和启动器座用灯座.修改件1Lampholders for tubular fluorescent lamps and starterholders; Amendment 111P;A4

IEC 60400 Edition 6.1-2002 管形荧光灯和启动器座用灯座Lampholders for tubular fluorescent lamps and starterholders155P;A4

IEC 60400-1999 管形荧光灯灯座和起动器座Lampholders for tubular fluorescent lamps and starterholders155P;A4

IEC 60401-1-2002 铁氧体软磁芯的术语和命名.第1部分:物理不规则性术语Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used forphysical irregularities37P;A4

IEC 60401-1993铁氧体材料.变压器和电感器铁芯制造厂产品目录中刊登的

数据格式导则

Ferrite materials; guide on the format of data appearing in manufacturers` catalogues oftransformer and inductor cores15P;A4

IEC 60404-10-1988磁性材料.第10部分:磁钢板材和带材的中频磁特性测量方

法

Magnetic materials; part 10: methods of measurement of magnetic properties of magnetic steelsheet and strip at medium frequencies39P;A4

IEC 60404-11 Edition 1.1-1999 磁性材料.第11部分:磁带和磁条表面绝缘电阻测定的试验

方法

Magnetic materials - Part 11: Method of test for the determination of surface insulation resistanceof magnetic sheet and strip

IEC 60404-11-1999 磁性材料.第11部分:磁性片,条表面绝缘抗性测定的方法Magnetic materials - Part 11: Method of test for the determination of surface insulation resistanceof magnetic sheet and strip

IEC 60404-1-2000 磁性材料.第1部分:分类 Magnetic materials - Part 1: Classification

IEC 60404-12-1992磁性材料.第12部分:层间绝缘涂覆物的温度性能的评定方

法指南

Magnetic materials; part 12: guide to methods of assessment of temperature capability ofinterlaminar insulation coatings25P;A4

（110） 351

IEC标准目录


开本页数

IEC 60404-13-1995磁性材料.第13部分:带电的带钢和钢板的密度、电阻率和

叠层系数的测量方法

Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factorof electrical steel sheet and strip30P;A4

IEC 60404-14-2002磁性材料.第14部分:用拔出或旋转法对铁磁材料试样的磁

偶极矩的测量方法

Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of aferromagnetic material specimen by the withdrawal or rotation method27P;A4

IEC 60404-2-1996磁性材料.第2部分:用爱普斯坦法测量电工钢片和钢带的磁

性能

Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electricalsteel sheet and strip by means of an Epstein frame37P;A4

IEC 60404-3 AMD 1-2002磁性材料.第3部分:用单片试验器测量磁钢片和磁钢带的磁

性能的方法.修改件1

Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magneticsheet and strip by means of a single sheet tester; Amendment 113P;A4

IEC 60404-3 Edition 2.1-2002磁性材料.第3部分:用单片测试仪测量磁性钢片和钢带的磁

性能的方法

Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magneticsheet and strip by means of a single sheet tester45P;A4

IEC 60404-3-1992磁性材料.第3部分:用单片试验器测量磁钢片和磁钢带的磁

性能的方法

Magnetic materials; part 3: methods of measurement of the magnetic properties of magneticsheet and strip by means of a single sheet tester35P;A4

IEC 60404-4 AMD 1-2000 磁性材料.第4部分:软磁材料的磁特性测量方法.修改件1Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magneticallysoft materials; Amendment 13P;A4

IEC 60404-5-1993 磁性材料.第5部分:永磁(硬磁)材料磁性能的测量方法Magnetic materials; part 5: permanent magnet (magnetically hard) materials; methods ofmeasurement of magnetic properties29P;A4

IEC 60404-6-1986磁性材料.第6部分:各向同性的镍铁软磁合金(E1、E3和E4型)磁特性的测量方法

Magnetic materials. Part 6 : Methods of measurement of the magnetic properties of isotropicnickel-iron soft magnetic alloys, types E1, E3 and E440P;A4

IEC 60404-7-1982 磁性材料.第7部分:开磁路中磁性材料矫顽力的测量方法Magnetic materials. Part 7 : Method of measurement of the coercivity of magnetic materials in anopen magnetic circuit17P;A4

IEC 60404-8-10-1994磁性材料.第8部分:单项材料规范.第10节:继电器用磁性材

料(铁和钢)规范

Magnetic materials - Part 8: Specifications for individual materials - Section 10: Specification formagnetic materials (iron and steel) for use in relays37P;A4

IEC 60404-8-1-2001 磁性材料.第8-1部分:单项材料规范.磁性硬质材料Magnetic materials - Part 8-1: Specifications for individual materials; Magnetically hard materials65P;A4

IEC 60404-8-2-1998 磁性材料.第8-2部分:半加工状态的冷轧合金钢片材和带材

独立规范

Magnetic materials - Part 8-2: Specifications for individual materials - Cold-rolled electricalalloyed steel sheet and strip delivered in the semi-processed state

IEC 60404-8-3-1998 磁性材料.第8-3部分:半加工状态的冷轧非合金钢片材和带

材独立规范

Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state

（111） 351

IEC标准目录


开本页数

IEC 60404-8-4-1998 磁性材料.第8-4部分:全加工状态的冷轧非定向电气钢片材

和带材独立规范

Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non orientedelectrical steel sheet and strip delivered in the fully-processed state

IEC 60404-8-5-1989磁性材料.第8部分:单项材料的规范.第5节:具备规定机械性

能和磁渗透性的磁钢片和磁钢带的规范

Magnetic materials; part 8: specifications for individual materials; section five: specification forsteel sheet and strip with specified mechanical properties and magnetic permeability30P;A4

IEC 60404-8-6-1999 磁性材料.第8-6部分:单个材料规范.软磁性金属材料Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallicmaterials

IEC 60404-8-7-1998 磁性材料.第8-7部分:全加工状态的冷轧晶粒定向电气钢片

材和带材独立规范

Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-orientedelectrical steel sheet and strip delivered in the fully-processed state

IEC 60404-8-8-1991磁性材料.第8部分:单项材料规范.第8节:中频下使用的薄磁

钢带规范

Magnetic materials; part 8: specifications for individual materials; section 8: specification for thinmagnetic steel strip for use at medium frequencies29P;A4

IEC 60404-8-9-1994磁性材料.第8部分:单项材料规范.第9节:烧结的软磁性材料

的标准规范

Magnetic materials - Part 8: Specifications for individual materials - Section 9: Standardspecification for sintered soft magnetic materials19P;A4

IEC 60404-9-1987 磁性材料.第9部分:磁性钢板材和带材几何特性测定法Magnetic materials. Part 9 : Methods of determination of the geometrical characteristics ofmagnetic steel sheet and strip

IEC 60405-1972 核仪表:提供电离辐射个人防护的结构要求Nuclear instruments: Constructional requirements to afford personal protection against ionizingradiation21P;A4

IEC 60410-1973 计数检查抽样方案和程序Sampling plans and procedures for inspection by attributes82P;A4

IEC 60412-1973 闪烁体的标准尺寸Standard dimensions of scintillators7P;A4

IEC 60413-1972 确定电机电刷材料物理性能的试验规程Test procedures for determining physical properties of brush materials for electrical machines41P;A4

IEC 60414-1973 指示式和记录式电气测量仪表及其附件的安全要求

Safety requirements for indicating and recording electrical measuring instruments and theiraccessories50P;A4

IEC 60417-1-2002 设备上用的图形符号.第1部分:综览和使用Graphical symbols for use on equipment - Part 1: Overview and application199P;A4

IEC 60417-2 AMD 1-2000 设备上用的图形符号.第2部分:原符号.修改件1Graphical symbols for use on equipment - Part 2: Symbol originals; Amendment 143P;A4

IEC 60417-2 AMD 2-2002 设备上用的图形符号.第2部分:符号原型.修改件2Graphical symbols for use on equipment - Part 2: Symbol originals; Amendment 249P;A4

IEC 60417-2-1998 设备上用的图形符号.第2部分:原形符号Graphical symbols for use on equipment - Part 2: Symbol originals278P;A4

IEC 60418-1 AMD 1-1976 可变电容器.第1部分:术语和试验方法.第1次修改 Variable capacitors. Part 1 : Terms and methods of test

IEC 60418-1 AMD 2-1981 可变电容器.第1部分:术语和试验方法.第2次修改 Variable capacitors. Part 1 : Terms and methods of test

（112） 351

IEC标准目录


开本页数

IEC 60418-1-1974 可变电容器.第1部分:术语和试验方法Variable capacitors. Part 1 : Terms and methods of test59P;A4

IEC 60418-2 AMD 1-1981 可变电容器.第2部分:A型可变调谐电容器的型式规范.第1 Variable capacitors. Part 2 : Type specification for variable tuning capacitors Type A

IEC 60418-2-1976 可变电容器.第2部分:A型可变调谐电容器的型式规范Variable capacitors. Part 2 : Type specification for variable tuning capacitors Type A30P;A4

IEC 60418-2A-1980 第1次补充Variable capacitors. Part 2: Type specification for variable tuning capacitors Type A. Firstsupplement: Blank detail specification for variable tuning capacitors Type A19P;A4

IEC 60418-2B-1980 第2次补充

Variable capacitors. Part 2 : Type specification for variable tuning capacitors Type A. Secondsupplement: Blank detail specification for variable tuning capacitors Type A fitted with integralpre-set capacitors Type C23P;A4

IEC 60418-3-1976 可变电容器.第3部分:B型微调可变电容器的型式规范Variable capacitors. Part 3 : Type specification for variable trimmer capacitors Type B23P;A4

IEC 60418-3A-1980 第1次补充Variable capacitors. Part 3 : Type specification for variable trimmer capacitors Type B. Firstsupplement: Blank detail specification19P;A4

IEC 60418-4-1976 可变电容器.C型预调可变电容器的型式规范Variable capacitors. Part 4 : Type specification for variable pre-set capacitors Type C21P;A4

IEC 60418-4A-1980 第1次补充Variable capacitors. Part 4 : Type specification for variable pre-set capacitors Type C. Firstsupplement: Blank detail specification17P;A4

IEC 60422-1989 电气设备中矿物绝缘油的维护和管理指南Supervision and maintenance guide for mineral insulating oils in electrical equipment71P;A4

IEC 60423-1993电气设备用导管.电气安装用导管的外径和导管及配件的螺

纹

Conduits for electrical purposes; outside diameters of conduits for electrical installations andthreads for conduits and fittings23P;A4

IEC 60424-1-1999 铁氧体磁心.表面不规则性限制的指南.第1部分:一般规范Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification17P;A4

IEC 60424-2-1997 铁氧体磁芯表面不平度极限值的导则.第2部分:RM-磁芯Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores17P;A4

IEC 60424-3-1999 铁氧体磁心.表面不规则性限制的指南.第3部分:ETD芯和E芯

Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores19P;A4

IEC 60424-4-2001 铁氧体磁心.表面不规则性限值的指南.第4部分:环形芯Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores5P;A4

IEC 60425-1973 电容器和电阻器标记用颜色的选择导则Guide for the choice of colours to be used for the marking of capacitors and resistors5P;A4

IEC 60426-1973 测定绝缘材料所引起的电解腐蚀的试验方法Test methods for determining electrolytic corrosion with insulating materials40P;A4

（113） 351

IEC标准目录


开本页数

IEC 60427-2000 高压交流断路器合成试验Synthetic testing of high-voltage alternating current circuit-breakers145P;A4

IEC 60428-1973 标准电池Standard cells23P;A4

IEC 60431 AMD 1-1995磁性氧化铁及相关部件组成的方形磁芯(RM磁芯)的尺寸.补充件1

Dimensions of square cores (RM cores) made of magnetic oxides and associated parts;Amendment 113P;A4

IEC 60431 AMD 2-1996 磁性氧化铁及相关部件制方芯(RM-芯)的尺寸Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts;Amendment 213P;A4

IEC 60431-1983 磁性氧化物正方形磁芯(RM磁芯)及其相关件的尺寸Dimensions of square cores (RM-cores) made of magnetic oxides and associated parts26P;A4

IEC 60432-1-1999 白炽灯.安全规范.第1部分:家用和类似一般照明用钨丝灯Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic andsimilar general lighting purposes85P;A4

IEC 60432-2-1999 白炽灯.安全规范.第2部分:家用和类似一般照明用石英碘灯Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic andsimilar general lighting purposes25P;A4

IEC 60432-3-2002 白炽灯.安全规范.第3部分:卤钨灯(非车用)Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)55P;A4

IEC 60433-19981000V以上额定电压的架空电线用绝缘子.交流电系统用瓷

绝缘子.长棒型绝缘子元件的特性

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c.systems - Characteristics of insulator units of the long rod type13P;A4

IEC 60434 AMD 1-1981 飞机用白炽丝灯.第1次修改 Aircraft electrical filament lamps

IEC 60434 AMD 2-1984 飞机用白炽丝灯.第2次修改 Aircraft electrical filament lamps

IEC 60434-1973 飞机用白炽灯泡Aircraft electrical filament lamps60P;A4

IEC 60436 AMD 3-1994 电动洗碟机性能的测量方法.补充件3Methods of measuring the performance of electric dishwashers; Amendment 313P;A4

IEC 60436-1981 电动洗碟机性能的测试方法Methods for measuring the performance of electric dishwashers54P;A4

IEC 60437-1997 高电压绝缘子无线电干扰试验Radio interference test on high-voltage insulators19P;A4

IEC 60439-1-1999低压开关设备和控制设备组件.第1部分:经过型式试验和部

分型式试验的组件

Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies199P;A4

IEC 60439-2-2000低压开关设备和控制设备组件.第2部分:母线干线系统的特

殊要求(线路)

Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbartrunking systems (busways)67P;A4

（114） 351

IEC标准目录


开本页数

IEC 60439-3 AMD 1-1993低压开关设备和控制设备组合装置.第3部分:用于安装在非

熟练人员可能进入使用的场所的低压开关设备和控制设备组合装置的特殊要求:配电盘.修改件1

Low-voltage switchgear and controlgear assemblies; part 3: particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilledpersons have access for their use; distribution boards; amendment 115P;A4

IEC 60439-3 AMD 2-2001低压开关设备和控制设备组合装置.第3部分:用于安装在非

熟练人员可能进入使用的场所的低压开关设备和控制设备组合装置的特殊要求:配电盘.修改件2

Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilledpersons have access for their use; Distribution boards; Amendment 213P;A4

IEC 60439-3 Edition 1.2-2001低压开关设备和控制设备装置.第3部分:对安装在不熟练人

员使用场所的低压开关设备和控制设备装置的特殊要求.配电盘

Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilledpersons have access for their use - Distribution boards41P;A4

IEC 60439-3-1990低压开关设备和控制设备组件.第3部分:安装于由不熟练人

员使用的地点的低压开关设备和控制设备处的特殊要求.配电盘

Low-voltage switchgear and controlgear assemblies; part 3: particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilledpersons have access for their use; distribution boards31P;A4

IEC 60439-4 AMD 1-1995低压开关设备和控制设备组件.第4部分:施工现场总装的特

殊要求.补充件1

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements forassemblies for construction sites (ACS); Amendment 15P;A4

IEC 60439-4 AMD 2-1999低压开关设备和控制设备组件.第4部分:建筑工地组装的特

殊要求ACS)补充件2

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements forassemblies for construction sites (ACS); Amendment 29P;A4

IEC 60439-4 Edition 1.2-1999低压开关设备和控制设备组件.第4部分:施工现场总装的特

殊要求

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements forassemblies for construction sites (ACS)49P;A4

IEC 60439-4-1990低压开关设备和控制设备组件.第4部分:施工现场总装的特

殊要求

Low-voltage switchgear and controlgear assemblies; part 4: particular requirements forassemblies for construction sites (ACS)46P;A4

IEC 60439-5 Edition 1.1-1998低压开关设备和控制设备组件.第5部分:公共场所室外安装

的组件的特殊要求.网络电力配电用电缆分配箱

Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements forassemblies intended to be installed outdoors in public places - Cable distribution cabinets(CDCs) for power distribution in networks49P;A4

IEC 60439-5-1998低压开关设备和控制设备组件.第5部件:室外公共场所中预

期安装组件的特殊要求.电网中配电用电缆配电盒(CDCs)

Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements forassemblies intended to be installed outdoors in public places - Cable distribution cabinets(CDCs) for power distribution in networks49P;A4

IEC 60441-1974 阴极射线管荧光屏发射光的光度和色度测量方法

Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tubescreen23P;A4

（115） 351

IEC标准目录


开本页数

IEC 60442 AMD 1-2003 家用和类似用途的电烤箱.性能的测量方法.修改件1Electric toasters for household and similar purposes - Methods for measuring the performance;Amendment 16P;A4

IEC 60442-1998 家用和类似用途的电面包烘烤器.性能的测量方法Electric toasters for household and similar purposes - Methods for measuring the performance25P;A4

IEC 60443-1974 测量用稳定电源装置Stabilized supply apparatus for measurement81P;A4

IEC 60444-1 AMD 1-1999用π型网络的零相位技术测量石英谐振器参数.第1部分:用π型网络零相位技术测量石英谐振器的谐振频率和谐振电阻的基本方法.第1次修订

Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1:Basic method for the measurement of resonance frequency and resonance resistance of quartzcrystal units by zero phase technique in a -network; Amendment 115P;A4

IEC 60444-1-1986用π型网络的零相位技术测量石英谐振器参数.第1部分:用π型网络零相位技术测量石英谐振器的谐振频率和谐振电阻的基本方法

Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 1:basic method for the measurement of resonance frequency and resonance resistance of quartzcrystal units by zero phase technique in a -network43P;A4

IEC 60444-2-1980用π型网络的零相位技术测量石英谐振器参数.第2部分:测量石英谐振器的动态电容的相位偏离法

Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 2 :phase offset method for measurement of motional capacitance of quartz crystal units18P;A4

IEC 60444-4-1988用π型网络的零相位技术测量石英谐振器参数.第4部分:石英晶体元件负荷谐振频率fl、负荷谐振电阻Rl的测量方法,以及石英晶体元件其他导出值的计算方法(频率小于

Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 4:method for the measurement of the load resonance frequency FL load resonance resistance RLand the calculation of other derived values of quartz crystal units, up to 30 MHz

IEC 60444-5-1995石英谐振器参数测量.第5部分:用自动网络分析仪和误差修

正技术评定电气参数的测量方法

Measurement of quartz crystal unit parameters - Part 5: Methods for the determination ofequivalent electrical parameters using automatic network analyzer techniques and errorcorrection

IEC 60444-6-1995 用π型网络的零相位技术测量石英谐振器参数.第6部分:驱动级测量

Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence(DLD)

IEC 60445-1999人机接口、作标记和识别的基本与安全原则.电器端子和用

相应符号标志的接线端子的识别方法(包括字母数字标志识

别通则)

Basic and safety principles for man-machine interface, marking and identifiation - Identification ofequipment terminals and of terminations of certain designated conductors, including generalrules for an alphanumeric system23P;A4

IEC 60446-1999人-机接口标记和鉴别的安全和基本规则.用颜色和数字对

导体的鉴别

Basic and safety principles for man-machine interface, marking and identification - Identificationof conductors by colours or numerals17P;A4

IEC 60447-1993 人机联系装置.驱动原理Man-machine interface (MMI); actuating principles38P;A4

IEC 60449 AMD 1-1979 建筑物电气设施的电压区段.第1次修改 Voltage bands for electrical installatons of buildings

IEC 60449-1973 建筑物电气设施的电压区段Voltage bands for electrical installiatons of buildings7P;A4

IEC 60450-1974 新的和老化的电工绝缘纸平均粘滞聚合度的测量Measurement of the average viscometric degree of polymerization of new and aged electricalpapers

（116） 351

IEC标准目录


开本页数

IEC 60454-1-1992 电工用压敏粘带规范.第1部分:一般要求Specifications for pressure-sensitive adhesive tapes for electrical purposes; part 1: generalrequirements19P;A4

IEC 60454-2-1994 电工用压敏粘带规范.第2部分:试验方法Specification for pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods oftest

IEC 60454-3-1 AMD 1-2001电工用压敏粘带.第3-1部分:单项材料规范.PVC压敏薄膜胶

粘带.修改件1

Pressure-sensitive adhesive tapes for electrical purposes - Part 3-1: Specifications for individualmaterials; PVC film tapes with pressure-sensitive adhesive; Amendment 13P;A4

IEC 60454-3-1 Edition 2.1-2002电工用压敏粘带.第3部分:单项材料规范.活页1:涂压敏粘合

剂的聚氯乙烯带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials; Sheet 1: PVC film tapes with pressure-sensitive adhesive15P;A4

IEC 60454-3-10-1995电工用压敏胶粘带.第3部分:单项材料规范.活页10:带有橡

胶制热固性胶的乙酸丁酸纤维素薄膜胶粘带的要求

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specification for individualmaterials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubberthermosetting adhesive11P;A4

IEC 60454-3-11-1998电工用压敏粘带.第3部分:单项材料规范.第11活页:用热固

橡胶粘合的纤维素皱纹纸和聚对苯二甲酸乙酯薄膜制成的混合带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 11: Combination tapes made of creped cellulosic paper and polyethyleneterephthalate film with rubber thermosetting adhesive11P;A4

IEC 60454-3-1-1998电工用压敏粘带.第3部分:单项材料规范.第1活页:聚氯乙烯

薄膜压敏粘带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 1: PVC film tapes with pressure-sensitive adhesive15P;A4

IEC 60454-3-12-1998电工用压敏粘带规范.第3部分:单项材料规范.第12活页:聚乙烯压敏薄膜粘带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 12: Polyethylene film tapes with pressure-sensitive adhesive13P;A4

IEC 60454-3-13-1995电工用压敏胶粘带.第3部分:单项材料规范.活页13:一侧涂

覆热塑材料、另一侧带有橡胶制热固性胶的复合纤维素胶粘编织带的要求

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 13: Requirements for combined cellulose-viscose woven fabric tapes, one sidecovered with a thermoplastic material, the other side with rubber thermosetting adhesive11P;A4

IEC 60454-3-14-2001电工用压敏粘带.第3部分:单项材料规范.活页14:具有压敏

粘性的聚四氟乙烯粘膜胶带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials; Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive11P;A4

IEC 60454-3-15-2001电工用压敏粘带.第3部分:单项材料规范.活页15:涂橡胶热

固性粘合剂的聚脂薄膜/聚脂非编织复合的带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials; Sheet 15: Polyester film/polyester non-woven combinations with rubber thermosettingadhesive11P;A4

IEC 60454-3-17-2001电工用压敏粘带.第3部分:单项材料规范.活页17:涂热敏粘

合剂的聚酯/环氧树脂复合的带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials; Sheet 17: Polyester/epoxy combinations with pressure-sensitive adhesive11P;A4

（117） 351

IEC标准目录


开本页数

IEC 60454-3-2-1998电工用压敏粘带.第3部分:单项材料规范.第2活页:用热固橡

胶或交联丙烯粘合的聚酯薄膜带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 2: Polyester film tapes with rubber thermosetting or acrylic crosslinkedadhesives


胶粘合的聚酯薄膜带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 3: Polyester film tapes with rubber thermoplastic adhesive11P;A4


胶粘合的纤维素皱纹纸

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive11P;A4


胶粘合的纤维素非皱纹纸

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive11P;A4

IEC 60454-3-6-1998电工用压敏粘带.第3部分:单项材料规范.第6活页:用丙烯酸

热固塑料粘合的聚碳酸酯薄膜带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive11P;A4

IEC 60454-3-7-1998电工用压敏粘带规范.第3部分:单项材料规范.第7活页:聚酰

亚胺薄膜粘带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive11P;A4

IEC 60454-3-8-1998电工用压敏粘带规范.第3部分:单项材料规范.第8活页:玻璃

纤维压敏粘带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 8: Glass fabric with pressure-sensitive adhesive11P;A4

IEC 60454-3-9-1998电工用压敏粘带规范.第3部分:单项材料规范.第9活页:热固

性橡胶醋酯编织纤维粘带

Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individualmaterials - Sheet 9: Cellulose acetate woven fabric tapes with rubber thermosetting adhesive11P;A4

IEC 60455-1-1998 电气绝缘用树脂基电抗化合物.第1部分:定义和一般要求Resin based reactive compounds used for electrical insulation - Part 1: Definitions and generalrequirements19P;A4

IEC 60455-2-1998 电气绝缘用树脂基反应化合物.第2部分:试验方法Resin based reactive conpounds used for electrical insulation - Part 2: Methods of test49P;A4

IEC 60455-2-2-1984电气绝缘用无溶剂可聚合树脂化合物规范.第2部分:试验方

法.电工用涂敷粉末试验方法

Specification for solventless polymerisable resinous compounds used for electrical insulation.Part 2 : Methods of test. Test methods for coating powders for electrical purposes39P;A4

IEC 60455-3-11-1988电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:单项材

料规范.第11活页:环氧树脂基粉末涂料

Specification for solventless polymerisable resinous compounds used for electrical insulation.Part 3: Specifications for individual materials. Sheet 11 : Epoxy resin-based coating powders


料规范.第1活页:未加填料的环氧树脂化合物

Specification for solventless polymerisable resinous compounds used for electrical insulation.Part 3 : Specifications for individual materials. Sheet 1: Unfilled epoxy resinous compounds9P;A4

（118） 351

IEC标准目录


开本页数

IEC 60455-3-2 AMD 1-1994电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:专用材

料规范.第2节:石英填充环氧树脂化合物.补充件1

Specification for solventless polymerisable resinous compounds used for electrical insulation -Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds;Amendment 15P;A4


料规范.第2活页:石英充填环氧树脂复合物

Specification for solventless polymerisable resinous compounds used for electrical insulation.Part 3 : Specifications for individual materials. Sheet 2: Quartz filled epoxy resinous compounds7P;A4


料规范.第3活页:未加填料的聚氨酯化合物

Specification for solventless polymerisable resinous compounds used for electrical insulation.Part 3 : Specifications for individual materials. Sheet 3 - Unfilled polyurethane compounds9P;A4


料规范.第4活页:加填料的聚氨酯化合物

Specification for solventless polymerisable resinous compounds used for electrical insulation.Part 3 : Specifications for individual materials. Sheet 4: Filled polyurethane compounds7P;A4

IEC 60455-3-5-2001电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第5活页:不饱和聚酯基浸渍树脂

Resin based reactive compounds used for electrical insulation - Part 3: Specifications forindividual materials; Sheet 5: Unsaturated polyester based impregnating resins15P;A4

IEC 60456-1998 家用洗衣机.性能的测量方法Clothes washing machines for household use - Methods for measuring the performance121P;A4

IEC 60457-1-1974刚性精密同轴线及其连带的精密连接器.第1部分:一般要求

和测量方法

Rigid precision coaxial lines and their associated precision connectors. Part 1 : Generalrequirements and measuring methods27P;A4

IEC 60457-2-1974刚性精密同轴线及其连带的精密连接器.第2部分:50Ω、7mm刚性精密同轴线及其连带的单一型精密同轴连接器

Rigid precision coaxial lines and their associated precision connectors. Part 2 : 50 ohm 7 mmrigid precision coaxial line and associated hermaphroditic precision coaxial connector12P;A4

IEC 60457-3-1980刚性精密同轴线及其连带的精密连接器.第3部分:14mm刚

性精密同轴线及其连带的单一型精密同轴连接器-特性阻抗

为50Ω和75Ω

Rigid precision coaxial lines and their associated precision connectors. Part 3 : 14 mm rigidprecision coaxial line and associated hermaphroditic precision coaxial connector - Characteristicimpedances 50 ohms and 75 ohms13P;A4

IEC 60457-4-1978刚性精密同轴线及其连带的精密连接器.第4部分:21mm刚

性精密同轴线及其连带的单一型精密同轴连接器.特性阻抗

50Ω(9/21型)、75Ω(6/21型)

Rigid precision coaxial lines and their associated precision connectors. Part 4 : 21 mm rigidprecision coaxial line and associated hermaphroditic precision coaxial connector. Characteristicimpedance 50 ohms (Type 9/21) - Characteristic impedance 75 ohms (Type 6/21).12P;A4

IEC 60457-5-1984刚性精密同轴线及其连带的精密连接器.第5部分:50Ω、3.5mm刚性精密同轴线和连接器的安装规定

Rigid precision coaxial lines and their associated precision connectors. Part 5 : 50 ohms 3.5 mmrigid precision coaxial line with provision for mounting connectors5P;A4

IEC 60461-2001 磁带录像机的时间码和控制码Time and control code for video tape recorders67P;A4

IEC 60462-1974 闪烁计数用光电倍增管的标准试验程序Standard test procedures for photomultiplier tubes for scintillation counting37P;A4

（119） 351

IEC标准目录


开本页数

IEC 60464-1-1998 电绝缘漆.第1部分:定义和一般要求Varnishes used for electrical insulation - Part 1: Definitions and general requirements15P;A4

IEC 60464-2-2001 电绝缘用清漆.第2部分:试验方法Varnishes used for electrical insulation - Part 2: Methods of test39P;A4

IEC 60464-3-1-2001 电气绝缘漆.第3部分:单项材料规范.活页1:室温固化饰面漆Varnishes used for electrical insulation - Part 3: Specifications for individual materials; Sheet 1:Ambient curing finishing varnishes11P;A4

IEC 60464-3-2-2001 电气绝缘漆.第3部分:单项材料规范.活页2:热固化浸渍漆Varnishes used for electrical insulation - Part 3: Specifications for individual materials; Sheet 2:Hot curing impregnating varnishes15P;A4

IEC 60465-1988 带油槽电缆用的新绝缘矿物油的规范Specification for unused insulating mineral oils for cables with oil ducts19P;A4

IEC 60466 AMD 1-1994额定电压大于1KV,小于等于38KV绝缘金属壳交流开关和

控制开关.第1次修改

A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to andincluding 38 kV; Amendment 15P;A4

IEC 60466-1987 高压绝缘封闭开关设备的控制设备A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1kV and up to andincluding 38 kV

IEC 60468-1974 金属材料电阻率测量方法Method of measurement of resistivity of metallic materials31P;A4

IEC 60469-1-1987 脉冲技术和仪器.第1部分:脉冲术语和定义Pulse techniques and apparatus. Part 1 : Pulse terms and definitions42P;A4

IEC 60469-2-1987 脉冲技术和仪器.第2部分:脉冲测量和分析,概论Pulse techniques and apparatus. Part 2 : Pulse measurement and analysis, generalconsiderations

IEC 60470-2000 高压交流接触器和基于接触器的电动机起动器High-voltage alternating current contactors and contactor-based motor-starters155P;A4

IEC 60471 AMD 1-1980 绝缘子串元件槽型和扁脚连接的尺寸.第1次修改 Dimensions of clevis and tongue couplings of string insulator units

IEC 60471-1977 绝缘子串元件槽型和扁脚连接的尺寸Dimensions of clevis and tongue couplings of string insulator units11P;A4

IEC 60475-1974 液体电介质取样方法Method of sampling liquid dielectrics22P;A4

IEC 60476-1993 核仪表.使用电离辐射源的电气测量系统和仪表.一般特性Nuclear instrumentation; electrical measuring systems and instruments utilizing ionizing radiationsources; general aspects41P;A4

IEC 60477 AMD 1-1997 实验室用直流电阻.第1次修订Laboratory d.c. resistors; Amendment 15P;A4

IEC 60477-1974 实验室用直流电阻器Laboratory d.c. resistors29P;A4

IEC 60477-2 AMD 1-1997 实验室用电阻.第2部分:实验室用交流电阻.第1次修订Laboratory resistors - Part 2: Laboratory a.c. resistors; Amendment 13P;A4

（120） 351

IEC标准目录


开本页数

IEC 60477-2-1979 实验室用电阻器.第2部分:实验室用交流电阻器Laboratory resistors. Part 2 : Laboratory a.c. resistors29P;A4

IEC 60478-1-1974 直流输出稳压电源.第1部分:术语和定义Stabilized power supplies, d.c. output. Part 1 : Terms and definitions35P;A4

IEC 60478-4-1976 直流输出稳压电源.第4部分:除射频干扰外的试验Stabilized power supplies, d.c. output. Part 4 : Tests other than radio-frequency interference75P;A4

IEC 60478-5-1993 直流输出稳定电源.第5部分:近场磁分量测量Stabilized power supplies, d.c. output; part 5: measurement of the magnetic component of thereactive near field19P;A4

IEC 60480-1974 来自电气设备的六氟化硫的检测方法指南Guide to the checking of sulphur hexafluoride (SF6) taken from electrical equipment41P;A4

IEC 60481-1974 电力线载波系统的结合设备Coupling devices for power line carrier systems26P;A4

IEC 60482-1975 电子仪器插件的尺寸Dimensions of electronic instrument modules (for nuclear electronic instruments)19P;A4

IEC 60483-1976 高机电耦合压电陶瓷的动态测量导则Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling35P;A4

IEC 60485-1974 数字电子直流电压表和直流电子模拟数转换器Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital converters96P;A4

IEC 60487-1-1984地面无线电接力系统所用设备的测量方法.第1部分:分系统

和模拟无线电中继系统通用测量方法

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 1 :Measurements common to sub-systems and simulated radio-relay systems109P;A4

IEC 60487-2-1-1981地面无线电接力系统所用设备的测量方法.第2部分:分系统

测量.第1节:总则

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section One - General7P;A4


测量.第2节:备用波道倒换机

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section Two - Stand-by channel switching equipment41P;A4


测量.第3节:射频分支网络

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section Three - R.F. branching networks15P;A4


测量.第4节:调频器

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section Four - Frequency modulators24P;A4


测量.第5节:频率解调器

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section Five - Frequency demodulators28P;A4


测量.第6节:分集、双路和热备用设备

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section Six - Diversity, twin-path and hot stand-by equipment38P;A4

（121） 351

IEC标准目录


开本页数


测量.第7节:无线电发射机

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section Seven - Radio transmitters15P;A4


测量.第8节:无线电接收机

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 :Measurements for sub-systems. Section Eight - Radio receivers20P;A4

IEC 60487-3-1975地面无线电接力系统所用设备的测量方法.第3部分:模拟系

统

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 :Simulated systems19P;A4

IEC 60487-3-2-1981地面无线电接力系统所用设备的测量方法.第3部分:模拟系

统.第2节:基带测量

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 :Simulated systems. Section Two - Measurements in the baseband7P;A4


统.第3节:黑白和彩色电视传输的测量

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 :Simulated systems. Section Three - Measurements for monochrome and colour televisiontransmission


统.第4节:分频多路传输的测量

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 :Simulated systems. Section Four - Measurements for f.d.m. transmission29P;A4


统.第5节:互干扰测量

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 :Simulated systems. Section Five - Measurement of mutual interference23P;A4


统.第6节:声节目传输测量

Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 :Simulated systems. Section Six - Measurements for sound-programme transmission36P;A4

IEC 60488-1974 市话电缆的铜导体尺寸Dimensions of copper conductors in local cables3P;A4

IEC 60489-1 AMD 1-1996移动设备中用的无线电设备的测量方法.第1部分:测量的通

用定义和标准状态.补充件1

Methods of measurement for radio equipment used in the mobile services - Part 1: Generaldefinitions and standard conditions of measurement; Amendment 13P;A4

IEC 60489-1 AMD 2-1999移动设备中用的无线电设备的测量方法.第1部分:测量的通

用定义和标准状态.补充件2

Methods of measurement for radio equipment used in the mobile services - Part 1: Generaldefinitions and standard conditions of measurement; Amendment 258P;A4

IEC 60489-1-1983移动设备使用的无线电设备的测量方法.第1部分:一般定义

和标准测量条件

Methods of measurement for radio equipment used in the mobile services. Part 1 : Generaldefinitions and standard conditions of measurement54P;A4

IEC 60489-2 AMD 1-1999移动设备中用无线电设备的测量方法.第2部分:采用A3E、F3E或G3E发射的发射机.补充件1

Methods of measurement for radio equipment used in the mobile services - Part 2: Transmittersemploying A3E, F3E or G3E emissions; Amendment 124P;A4

（122） 351

IEC标准目录


开本页数

IEC 60489-2-1991移动设备中用的无线电设备的测量方法.第2部分:采用A3E、F3E或G3E发射的发射机

Methods of measurement for radio equipment used in the mobile services; part 2: transmittersemploying A3E, F3E or G3E emissions105P;A4

IEC 60489-3 AMD 1-1999移动设备使用的无线电设备的测量方法.第3部分:A3E或F3E和G3E发射的接收机.第1次修订

Methods of measurement for radio equipment used in the mobile services - Part 3: Receiversemploying A3E, F3E or G3E emissions; Amendment 141P;A4

IEC 60489-3-1988移动设备中用无线电设备的测量方法.第3部分:A3E或F3E发射的接收机

Methods of measurement for radio equipment used in the mobile services; part 3: receivers forA3E or F3E emissions176P;A4

IEC 60489-4-1991移动设备中用无线电设备的测量方法.第4部分:采用单边带

发射的(R3E、H3E或J3E)发射机

Methods of measurement for radio equipment used in the mobile services; part 4: transmittersemploying single-sideband emissions (R3E, H3E or J3E)107P;A4

IEC 60489-5-1987移动设备中用无线电设备的测量方法.第5部分:采用单边带

技术(R3E.H3E或J3E)的接收机

Methods of measurement for radio equipment used in the mobile services; part 5: receiversemploying single-sideband techniques (R3E, H3E or J3E)158P;A4

IEC 60489-6-1999 用于移动服务的无线电设备.测量方法.第6部分:数据设备Radio equipment used in mobile services - Methods of measurement - Part 6: Data equipment146P;A4

IEC 60489-8 AMD 1-2000移动设备中用无线电设备的测量方法.第8部分:天线及辅助

设备的测量方法.修改件1

Methods of measurement for radio equipment used in the mobile services - Part 8: Methods ofmeasurement for antennas and ancillary equipment; Amendment 127P;A4

IEC 60489-8-1984 移动设备中用无线电设备的测量方法.第8部分:天线Methods of measurement for radio equipment used in the mobile services. Part 8 : Methods ofmeasurement for antennas27P;A4

IEC 60491-1984 对照相用电子闪光装置的安全要求Safety requirements for electronic flash apparatus for photographic purposes101P;A4

IEC 60493-1-1974老化试验数据的统计分析导则.第1部分:以正态分布试验结

果平均值为基础的方法

Guide for the statistical analysis of ageing test data. Part 1 : Methods based on mean values ofnormally distributed test results38P;A4

IEC 60494-1-2002铁路设施.机车车辆.受电弓.特征和试验.第1部分:干线车辆

用受电弓

Railway applications - Rolling stock; Pantographs; Characteristics and tests - Part 1:Pantographs for mainline vehicles55P;A4

IEC 60494-2-2002铁路设施.机车车辆.导电弓架.特性和试验.第2部分:地下铁

路和轻轨车辆用导电弓架

Railway applications - Rolling stock; Pantographs; Characteristics and tests - Part 2:Pantographs for metros and light rail vehicles49P;A4

IEC 60495-1993 单边带供电线载波端子Single sideband power-line carrier terminals71P;A4

IEC 60496 AMD 1-1977 家用和类似用途的电热板性能的测量方法.第1次修改Methods for measuring the performance of electric warming plates for household and similarpurposes

（123） 351

IEC标准目录


开本页数

IEC 60496 AMD 2-1992 第2次修改Methods of measuring performance of electric warming plates for household and similarpurposes; amendment 23P;A4

IEC 60496-1975 家用和类似用途的电热板性能的测量方法

Methods for measuring the performance of electric warming plates for household and similarpurposes18P;A4

IEC 60498-1975 核仪器用高压同轴连接器High-voltage coaxial connectors used in nuclear instrumentation18P;A4

IEC 60500-1974 IEC标准水听器IEC standard hydrophone24P;A4

IEC 60502-1 Edition 1.1-1998额定电压由1KV到30KV的挤压绝缘电力电缆和其附件.第1部分:额定电压为1KV的电缆

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U = 1,2kV) up to 30 kV (U = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U = 1,2 kV) and 3 kV (U =3,6 kV)

IEC 60502-1-1998额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘

电力电缆及其附件.第1部分:额定电压1kV(Um=1.2kV)和3kV(Um=3.6kV)的电缆

Power cables with extruded insulation and their accessories for rated voltages from 1 kV ( = 1,2kV) up to 30 kV ( = 36 kV) - Part 1: Cables for rated voltages of 1 kV ( = 1,2 kV) and 3 kV ( = 3,6kV)93P A4

IEC 60502-2 Edition 1.1-1998额定电压由1KV到30KV的挤压绝缘电力电缆和其附件.第2部分:额定电压为6-30KV的电缆

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U = 1,2kV) up to 30 kV (U = 36 kV) - Part 2: Cables for rated voltages from 6 kV (U = 7,2 kV) up to 30 kV(U = 36 kV)

IEC 60502-2-1998额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘

电力电缆及其附件.第2部分:额定电压从1kV(Um=1.2kV)到30kV(Um=36kV)的电缆

Power cables with extruded insulation and their accessories for rated voltages from 1 kV ( = 1,2kV) up to 30 kV ( = 36 kV) - Part 2: Cables for rated voltages from 6 kV ( = 7,2 kV) up to 30 kV (= 36 kV)107P A4

IEC 60502-4-1997额定电压1kV(Um=1.2kV)到30kV(Um=36kV)的挤压绝缘电

力电缆及其附件.第4部分:额定电压6kV(Um=7.2kV)到30kV(Um=36kV)的电缆附件的试验要求

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U=1,2kV) up to 30 kV (U=36 kV) - Part 4: Test requirements on accessories for cables with ratedvoltages from 6 kV (U=7,2 kV) up to 30 kV (U=36 kV)51P;A4

IEC 60503-1998 广播磁带录像机(VTRS)用片盘Spools for broadcast videotape recorders (VTRS)17P;A4

IEC 60505-1999 电绝缘系统的评价和合格鉴定Evaluation and qualification of electrical insulation systems75P;A4

IEC 60507-1991 交流系统高压绝缘子的人为污染试验Artificial pollution tests on high-voltage insulators to be used on a.c. systems56P;A4

IEC 60508-1975 家用和类似用途电熨机性能的测量方法

Methods for measuring the performance of electric ironing machines for household and similarpurposes26P;A4

IEC 60509-1988 可再充电的封闭式钮扣形镍-镉单体电池Sealed nickel-cadmium button rechargeable single cells23P;A4

IEC 60510-1-1975 卫星地面站用无线电设备的测量方法.第1部分:总则Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : General19P;A4

（124） 351

IEC标准目录


开本页数

IEC 60510-1-2-1984卫星地面站用无线电设备的测量方法.第1部分:分系统和分

系统组合件通用的测量.第2节:射频范围内的测量

Methods of measurement for radio equipment used in satellite earth stations.. Part 1 :Measurements common to sub-systems and combinations of sub-systems.. Section Two -Measurements in the r.f. range46P;A4

IEC 60510-1-3 AMD 1-1988卫星地面站用无线电设备的测量方法.第1部分:分系统和分

系统组合件通用的测量.第3节:中频范围内的测量.第1次修

改

Methods of measurement for radio equipment used in satellite earth stations; part 1:measurements common to sub-systems and combinations of sub-systems; section three:measurements in the i.f. range; amendment No. 1 to publication 60510-1-3 (1980)15P;A4


系统组合件通用的测量.第3节:中频范围内的测量

Methods of measurement for radio equipment used in satellite earth stations.. Part 1 :Measurements common to sub-systems and combinations of sub-systems.. Section Three -Measurements in the i.f. range29P;A4


系统组合件通用的测量.第4节:基本频带域中的测量

Methods of measurement for radio equipment used in satellite earth stations.. Part 1 :Measurements common to sub-systems and combinations of sub-systems.. Section Four -Measurement in the baseband27P;A4


系统组合件通用的测量.第5节:噪声温度测量

Methods of measurement for radio equipment used in satellite earth stations. Part 1:Measurements common to sub-systems and combinations of sub-systems. Section Five: Noisetemperature measurements33P;A4

IEC 60510-1A-1980 第1次补充

Methods of measurement for radio equipment used in satellite earth stations.. Part 1 :Measurements common to sub-systems and combinations of sub-systems.. First supplement:Sub-clause 6.2: D.C. source conditions7P;A4

IEC 60510-2-1 AMD 1-1989卫星地面站用无线电设备的测量方法.第2部分:分系统测量.第1节:总则.第2节:天线(包括馈线网络).第1次修改

Methods of measurement for radio equipment used in satellite earth stations; part 2:measurements for sub-systems; section one: general; section two: antenna (including feednetwork); amendment No. 1 to IEC 60510-2-1:197613P;A4

IEC 60510-2-1-1978卫星地面站用无线电设备的测量方法.第2部分:分系统测量.第1节:总则.第2节:天线(包括馈线网络)

Methods of measurement for radio equipment used in satellite earth stations.. Part 2 :Measurements for sub-system. Section One - General. Section Two - Antenna (includingnetwork)

IEC 60510-2-3-1989卫星地面站用无线电设备的测量方法.第2部分:分系统的测

量.第3节:低噪声放大器

Methods of measurement for radio equipment used in satellite earth stations; part 2:measurements for sub-systems; section three: low-noise amplifier11P;A4


量.第4节:向上、向下变换器

Methods of measurement for radio equipment used in satellite earth stations; part 2:measurements for sub-systems; section four: up- and down-converters34P;A4


量.第5节:调频器

Methods of measurement for radio equipment used in satellite earth stations; part 2:measurement for sub-systems; section 5: frequency modulators29P;A4

（125） 351

IEC标准目录


开本页数


量.第6节:频率解调器

Methods of measurement for radio equipment used in satellite earth stations; part 2:measurement for sub-systems; section 6: frequency demodulators43P;A4


量.第7节:大功率放大器

Methods of measurement for radio equipment used in satellite earth stations; part 2:measurements for sub-systems; section seven, high-power amplifier27P;A4

IEC 60510-3-1-1981卫星地面站用无线电设备的测量方法.第3部分:分系统组合

件的测量方法.第1节:总则

Methods of measurement for radio equipment used in satellite earth stations. Part 3 : Methods ofmeasurement for combinations of sub-systems. Section One - General9P;A4


件的测量方法.第2节:频率范围为4GHz-6GHz的接收系统

品质因数(G/T)的测量

Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods ofmeasurement on combinations of sub-systems. Section Two: Measurement of the figure of merit(G/T) of the receiving system in the 4 GHz to 6 GHz range27P;A4


件的测量方法.第3节:黑白电视和彩色电视传送的测量

Methods of measurement for radio equipment used in satellite earth stations; part 3: methods ofmeasurement for combination of sub-systems; section three; measurements for monochromeand colour television transmission64P;A4


件的测量方法.第4节:分频多路传输

Methods of measurement for radio equipment used in satellite earth stations; part 3: methods ofmeasurement on combinations of sub-systems; section 4: measurements for frequency divisionmultiplex (f.d.m) transmission43P;A4

IEC 60512-10-4-1996电子设备用机电元件.基本试验程序和测量方法.第10部分:冲击试验(自由元件)、静荷载试验(固定元件)、寿命试验和

过负荷试验.第4节:试验10d:连接器电过负荷

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 10: Impact tests (free components), static load tests (fixedcomponents), endurance test and overload tests - Section 4: Test 10d: Electrical overload(connectors)

IEC 60512-1-100-2001电子设备连接件.试验和测量.第1-100部分:总则.应用出版

物

Connectors for electronic equipment - Tests and measurements - Part 1-100: General;Applicable publications15P;A4

IEC 60512-11-10-2002电子设备连接器.试验和测量.第11-10部分:气候试验.试验

11j:低温

Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests; Test11j: Cold9P;A4


11k:低气压

Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests; Test11k: Low air pressure7P;A4

IEC 60512-11-1-1995电子设备用机电元件.基本试验程序和测量方法.第11部分:气候试验.第1节:11a:气候顺序

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence9P;A4


11m:湿热、循环

Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests; Test11m: Damp heat, cyclic9P;A4

（126） 351

IEC标准目录


开本页数


11n:无钎焊包装连接的气密性

Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test11n: Gas tightness, solderless wrapped connections7P;A4

IEC 60512-11-14-1996电子设备用机电元件.基本试验程序和测量方法.第11部分:气候试验.第14节:11P试验.流动性单一气体的腐蚀试验

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 11: Climatic tests - Section 14: Test 11p - Flowing single gas corrosiontest

IEC 60512-1-1-2002电子设备连接器.试验和测量.第1-1部分:一般检查.试验1a:外观检查

Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination;Test 1a: Visual examination7P;A4


11b:组合的/顺序的低温、低气压和湿热

Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests; Test11b: Combined/sequential cold, low air pressure and damp heat7P;A4


11c:湿热、稳态

Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests; Test11c: Damp heat, steady state9P;A4


11d:温度的快速变化

Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests; Test11d: Rapid change of temperature7P;A4


11e:霉菌生长

Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests; Test11e: Mould growth7P;A4


11f:盐雾腐蚀

Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests; Test11f: Corrosion, salt mist7P;A4

IEC 60512-11-7-1996电子设备用机电元件.基本试验程序和测量方法.第11部分:气候试验.第7节:试验11g:流动混合气体腐蚀性试验

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 11: Climatic tests - Section 7: Test 11g: Flowing mixed gas corrosiontest

IEC 60512-11-8-1995电子设备用机电元件.基本试验程序和测量方法.第11部分:气候试验.第8节:11h:砂尘

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 11: Climatic tests - Section 8: Test 11h: Sand and dust9P;A4


11i:干热

Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests; Test11i: Dry heat9P;A4

IEC 60512-1-2001 电子设备连接件.试验和测量.第1部分:总则Connectors for electronic equipment - Tests and measurements - Part 1: General11P;A4

IEC 60512-1-2-2002电子设备连接器.试验和测量.第1-2部分:一般检查.试验1b:尺寸和质量检查

Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination;Test 1b: Examination of dimension and mass7P;A4

（127） 351

IEC标准目录


开本页数

IEC 60512-12-6-1996电子设备用机电元件.基本试验程序和测量方法.第12部分:焊接试验.第6节:试验12f:机械焊接过程中耐稀释和清洗剂

用密封件

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux andcleaning solvents in machine soldering15P;A4

IEC 60512-12-7-2001电子设备连接器.试验和测量.第12-7部分:焊接试验.试验

12g.可焊接性.湿润平衡方法

Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests; Test12g: Solderability, wetting balance method7P;A4

IEC 60512-13-1-1996电子设备用机电元件.基本试验程序和测量方法.第13部分:机械操作试验.第1节:试验13a:啮合力和离心力

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 13: Mechanical operating tests - Section 1: Test 13a: Engaging andseparating forces

IEC 60512-1-3-1997电子设备用机电元件.基本试验程序和测量方法.第1部分:一般检测.第3节:试验1c.电接合长度

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagementlength

IEC 60512-1-4-1997电子设备用机电元件.基本试验程序和测量方法.第1部分:总则.第4节:试验1d:接触保护效果(防碰擦)

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness(scoop-proof)

IEC 60512-14-7-1997电子设备用机电元件.基本试验程序和测量方法.第14部分:密封试验.第7节:试验14g:水冲击

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water7P;A4

IEC 60512-15-8-1995电子设备用机电元件.基本试验程序和测量方法.第15部分:接触件及引出端机械试验.第8节:试验15h:接触件固定结构

耐工刀具使用性

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test15h: Contact retention system resistance to tool application9P;A4

IEC 60512-16-20-1996电子设备用机电元件.基本试验程序和测量方法.第16部分:接触件及引出端机械试验.第20节:试验16t:无焊接绕线端机

械强度

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test16t: Mechanical strength (wired termination of solderless connections)7P;A4

IEC 60512-19-3-1997电子设备用机电元件.基本试验程序和测量方法.第19部分:耐化学试验.第3节:试验19c:流阻

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c: Fluid resistance11P;A4

IEC 60512-2 AMD 1-1994电子设备用机电元件.基本试验规程和测量方法.第2部分:一般检查,电连续性和接触电阻试验,绝缘试验和电压应力试

验.补充件1

Electromechanical components for electronic equipment; basic testing procedures andmeasuring methods - Part 2: General examination, electrical continuity and contact resistancetests, insulation tests and voltage stress tests; Amendment 15P;A4

IEC 60512-20-2-2000电子设备用电机元件.基本试验程序和测量方法.第20-2部分:试验20b.易燃试验.耐火性

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness23P;A4

IEC 60512-2-1-2002电子设备连接器.试验和测量.第2-1部分:电连续性和接触电

阻试验.试验2a:接触电阻.毫伏法

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuityand contact resistance tests; Test 2a: Contact resistance - Millivolt level method9P;A4

（128） 351

IEC标准目录


开本页数


阻试验.试验2c:接触电阻偏差

Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuityand contact resistance tests; Test 2c: Contact resistance variation7P;A4

IEC 60512-23-3-2000电子设备用电机元件.基本试验程序和测量方法.第23-3部分:试验23c.连接件和附属件的屏蔽效应

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories23P;A4

IEC 60512-23-4-2001电子设备连接器.试验和测量.第23-4部分:屏蔽和过滤试验.试验23d:传输线路的时域反射

Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening andfiltering tests; Test 23d: Transmission line reflections in the time domain29P;A4

IEC 60512-25-1-2001 电子设备用接头.试验和测量.第25-1部分:试验25a.串音比

率

Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a; Crosstalkratio

IEC 60512-25-2-2002电子设备连接器.试验和测量.第25-2部分:试验25b.衰减(介入损耗)

Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b -Attenuation (insertion loss)27P;A4

IEC 60512-25-3-2001电子设备用接头.试验和测量.第25-3部分:试验25c.上升时

间递降

Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c; Rise timedegradation23P;A4

IEC 60512-25-4-2001电子设备用接头.试验和测量.第25-4部分:试验25d.扩展延

迟

Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d;Propagation delay23P;A4


阻试验.试验2f:外壳电连续性

Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuityand contact resistance tests; Test 2f: Housing (shell) electrical continuity7P;A4

IEC 60512-3-1-2002电子设备连接器.试验和测量.第3-1部分:绝缘试验.试验3a:绝缘电阻

Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests; Test3a: Insulation resistance7P;A4

IEC 60512-4-2-2002电子设备连接器.试验和测量.第4-2部分:电压应力试验.试验4b:部分放电

Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests;Test 4b: Partial discharge5P;A4

IEC 60512-4-3-2002电子设备连接器.试验和测量.第4-3部分:电压应力试验.试验4c:预绝缘卷筒的电压检验

Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests;Test 4c: Voltage proof of pre-insulated crimp barrels7P;A4

IEC 60512-5-1-2002电子设备连接器.试验和测量.第5-1部分:载流容量试验.试验5a:温升

Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carryingcapacity tests; Test 5a: Temperature rise7P;A4

IEC 60512-5-2-2002电子设备连接器.试验和测量.第5-2部分:载流容量试验.试验5b:电流-温度下降

Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carryingcapacity tests; Test 5b: Current-temperature derating13P;A4

（129） 351

IEC标准目录


开本页数

IEC 60512-6-1-2002电子设备连接器.试验和测量.第6-1部分:动态应力试验.试验6a:稳态加速度

Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests;Test 6a: Acceleration, steady state9P;A4

IEC 60512-6-2-2002电子设备连接器.试验和测量.第6-2部分:动态应力试验.试验6b:冲击

Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests;Test 6b: Bump9P;A4

IEC 60512-6-3-2002电子设备连接器.试验和测量.第6-3部分:动态应力试验.试验6c:冲击

Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests;Test 6c: Shock9P;A4

IEC 60512-6-4-2002电子设备连接器.试验和测量.第6-4部分:动态应力试验.试验6d:振动(正弦)

Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests;Test 6d: Vibration (sinusoidal)9P;A4

IEC 60512-6-5-1997电子设备用机电元件.基本试验规程和测量方法.第6部分:动态应力试验.第5节:6e试验:无规则振动

Electromechanical components for electronic equipment - Basic testing procedures andmeasuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration9P;A4

IEC 60512-8-1993电子设备用机电部件.基本试验规程和试验方法.第8部分:连接试验(机械)和接触件与接线端的机械试验

Electromechanical components for electronic equipment; basic testing procedures andmeasuring methods; part 8: connector tests (mechanical) and mechanical tests on contacts andterminations

IEC 60512-9-1992电子设备用机电元件.基本试验规程和测量方法.第9部分:杂项试验

Electromechanical components for electronic equipment; basic testing procedures andmeasuring methods; part 9: miscellaneous tests35P;A4

IEC 60515-1975 核反应堆仪器和防护用辐射探测器.特性和试验方法Radiation detectors for the instrumentation and protection of nuclear reactors; characteristics andtest methods45P;A4

IEC 60516 AMD 1-1984 数据处理用模块式仪器系统.CAMAC系统.第1次修改 A modular instrumentation system for data handling; CAMAC system

IEC 60516-1975 数据处理用模块式仪器系统.CAMAC系统A modular instrumentation system for data handling; CAMAC system65P;A4

IEC 60517 AMD 1-1994 额定电压72.5KV以上气绝缘金属壳开关.第1次修改Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above; Amendment 17P;A4

IEC 60517-1990 额定电压72.5KV及以上的气体绝缘的金属壳式开关设备Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above117P;A4

IEC 60519-11-1997电热装置的安全.第11部分:金属液体的电磁扰动,运输和净

化安装设备的特殊要求

Safety in electroheat installations - Part 11: Particular requirements for installations forelectromagnetic stirring, transport or pouring of metal liquids29P;A4

IEC 60519-1-1984 电热装置的安全.第1部分:一般要求Safety in electroheat installations. Part 1 : General requirements39P;A4

IEC 60519-21-1998电热装置的安全.第21部分:电阻加热设备的特殊要求.玻璃

加热和玻璃熔化设备

Safety in electroheat installations - Part 21: Particular requirements for resistance heatingequipment - Heating and melting glass equipment15P;A4

（130） 351

IEC标准目录


开本页数

IEC 60519-2-1992 电热装置的安全.第2部分:对电阻加热设备的特殊要求Safety in electroheat installations; part 2: particular requirements for resistance heatingequipment

IEC 60519-3-1988 电热装置的安全.第3部分:对感应和传导加热设备以及感应

熔化设备的特殊要求

Safety in electroheat installations.. Part 3: Particular requirements for induction and conductionheating and induction melting installations

IEC 60519-4 AMD 1-2000 电热装置的安全.第4部分:电弧炉安装的特殊要求.修改件1Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations;Amendment 110P;A4

IEC 60519-4 Edition 2.1-2000 电热装置的安全.第4部分:电弧炉安装的特殊要求Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations35P;A4

IEC 60519-4-1995 电热装置的安全.第4部分:电弧炉安装的特殊要求Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations31P;A4

IEC 60519-5-1980 电热装置的安全.第5部分:等离子装置安全规范Safety in electroheat installations. Part 5 : Specifications for safety in plasma installations17P;A4

IEC 60519-6-2002 电热装置的安全.第6部分:工业微波加热设备安全规范Safety in electroheat installations - Part 6: Specifications for safety in industrial microwaveheating equipment27P;A4

IEC 60519-7-1983 电热装置的安全.第7部分:对有电子枪的装置的特殊要求Safety in electroheat installations. Part 7 : Particular requirements for installations with electronguns

IEC 60519-8-1983 电热装置的安全.第8部分:对电渣重熔炉的特殊要求Safety in electroheat installations. Part 8 : Particular requirements for electro-slag remeltingfurnaces

IEC 60519-9-1987 电热装置的安全.第9部分:高频电介质加热装置的特殊要求Safety in electroheat installations. Part 9 : Particular requirements for high-frequency dielectricheating installations21P;A4

IEC 60522-1999 X射线管装置的永久滤波的测定Determination of the permanent filtration of X-ray tube assemblies9P;A4

IEC 60523 AMD 1-1979 直流电位计.第1次修改 Direct-current potentiometers

IEC 60523 AMD 2-1997 直流电位计.第2次修订Direct-current potentiometers; Amendment 25P;A4

IEC 60523-1975 直流电位计Direct-current potentiometers44P;A4

IEC 60524 AMD 1-1981 直流电阻电压比例箱.第1次修改 Direct-current resistive volt ratio boxes

IEC 60524 AMD 2-1997 直流电阻电压比例箱.第2次修订Direct-current resistive volt ratio boxes; Amendment 25P;A4

IEC 60524-1975 直流电阻电压比例箱Direct-current resistive volt ratio boxes30P;A4

IEC 60525 AMD 1-1980 磁性氧化物或铁粉环形磁心的尺寸.第1次修改 Dimensions of toroids made of magnetic oxides or iron powder

IEC 60525-1976 磁性氧化物或铁粉环形磁心的尺寸Dimensions of toroids made of magnetic oxides or iron powder11P;A4

IEC 60526-1978 医用X线设备用高压电缆插头和插座连接High-voltage cable plug and socket connections for medical X-ray equipment18P;A4

（131） 351

IEC标准目录


开本页数

IEC 60527-1975 直流放大器.特性和试验方法Direct current amplifiers; characteristics and test methods67P;A4

IEC 60528-1975 红外线空气质量分析仪性能的表示法Expression of performance of air quality infra-red analyzers35P;A4

IEC 60529 AMD 1-1999 外壳防护等级(国际防护等级代码).修改件1Degrees of protection provided by enclosures (IP code); Amendment 17P;A4

IEC 60529 Edition 2.1-2001 外壳保护度(IP代码)Degrees of protection provided by enclosures (IP code)91P;A4

IEC 60529-1989 外壳防护等级(国际防护等级代码)Degrees of protection provided by enclosures (IP code)73P;A4

IEC 60530 AMD 1-1992 第1次修改Methods for measuring performance of electric kettles and jugs for household and similarpurposes; amendment 13P;A4

IEC 60530-1975 家用和类似用途电水壶和电水罐性能的测量方法

Methods for measuring the performance of electric kettles and cooking vessels for householdand similar purposes10P;A4

IEC 60531-1999 家用电热存储式房间加热器.测量性能的方法 Household electric thermal storage room heaters - Methods for measuring performance

IEC 60532-1992辐射防护仪表.内装的剂量强度计.报警装置和监视仪.能量

在50keV和70MeV之间的X和γ辐射

Radiation protection instrumentation; installed dose ratemeters, warning assemblies andmonitors; X and gamma radiation of energy between 50 keV and 7 MeV75P;A4

IEC 60533-1999 船用电气和电子装置.电磁兼容性Electrical and electronic installations in ships - Electromagnetic compatibility49P;A4

IEC 60534-1-1987 工业过程控制阀.第1部分:控制阀术语和一般原理 Industrial-process control valves. Part 1: Control valve terminology and general considerations.

IEC 60534-2-1-1998工业过程控制阀.第2-1部分:流量.安装条件下流体流量的校

准公式

Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow underinstalled conditions47P;A4

IEC 60534-2-3-1997 工业过程控制阀.第2-3部分:流通能力.试验规程Industrial-process control valves - Part 2-3: Flow capacity - Test procedures47P;A4

IEC 60534-2-4-1989工业过程控制阀.第2部分:流通能力.第4节:天然流动特性和

量程范围

Industrial-process control valves; part 2: flow capacity; section four: inherent flow characteristicsand rangeability15P;A4

IEC 60534-3-1-2001工业过程控制阀.第3-1部分:尺寸.法兰面对面尺寸,两路,直型和法兰中心对面尺寸,两路,球形,角型控制阀门

Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged,two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves13P;A4

IEC 60534-3-1976工业过程控制阀.第3部分:尺寸.第1节:二通球形控制阀的法

兰端面距

Industrial-process control valves. Part 3 : Dimensions. Section One: Face-to-face dimensions forflanged, two-way, globe-type control valves.11P;A4

（132） 351

IEC标准目录


开本页数

IEC 60534-3-2-2001工业过程控制阀.第3-2部分:尺寸.蝶形阀除外的转式控制阀

的端面距

Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotarycontrol valves except butterfly valves11P;A4

IEC 60534-3-3-1998工业过程控制阀.第3部分:尺寸.对接焊的两向阀,球型阀,直接图形控制阀的首尾相接尺寸

Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld,two-way, globe-type, straight pattern control valves7P;A4

IEC 60534-4-1999 工业过程控制阀.第4部分:检验和常规试验Industrial-process control valves - Part 4: Inspection and routine testing43P;A4

IEC 60534-5-1982 工业过程控制阀.第5部分:标志Industrial-process control valves. Part 5 : Marking11P;A4

IEC 60534-6-1-1997工业过程控制阀.第6部分:定位器装到控制驱动器的安装细

则.第1节:线型致动器上定位器安装

Industrial-process control valves - Part 6: Mounting details for attachment of positioners to controlvalves - Section 1: Positioner mounting on linear actuators27P;A4

IEC 60534-6-2-2000工业过程控制阀.第6-2部分:定位器联接到控制阀的安装细

则.环行执行机构定位器

Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners tocontrol valves; Positioner mounting on rotary actuators11P;A4

IEC 60534-7-1989 工业过程控制阀.第7部分:数据表Industrial-process control valves; part 7: control valve data sheet28P;A4

IEC 60534-8-1-1986工业过程控制阀.第8部分:噪声的考虑.第1节:流经控制阀的

气动流产生的噪声的实验室测量

Industrial-process control valves. Part 8 : Noise considerations. Section one - Laboratorymeasurement of noise generated by aerodynamic flow through control walves18P;A4

IEC 60534-8-2-1991工业过程控制阀.第8部分:噪声问题.第2节:由通过控制阀的

液力流产生的噪声的实验室测量

Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurementof noise generated by hydrodynamic flow through control valves33P;A4

IEC 60534-8-3-2000工业过程控制阀.第8-3部分:噪声的考虑.控制阀的气动噪声

预测法

Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamicnoise prediction method113P;A4

IEC 60534-8-4-1994工业过程控制阀.第8部分:噪声状态.第4节.流动产生的噪声

的预报

Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noisegenerated by hydrodynamic flow25P;A4

IEC 60535-1977 喷流扇和调速器Jet fans and regulators24P;A4

IEC 60539-1-2002 直热式负温度系数热敏电阻器.第1部分:总规范Directly heated negative temperature coefficient thermistors - Part 1: Generic specification46P;A4

IEC 60541-1976 IEC与北美软线类型对比资料Comparative information on I E C and North American flexible cord types25P;A4

IEC 60542 AMD 1-1988 有载分接开关应用导则.第1次修改Application guide for on-load tap-changers; amendment No. 1 to publication 60542 (1976)7P;A4

IEC 60542-1976 有载分接开关应用导则Application guide for on-load tap-changers17P;A4

（133） 351

IEC标准目录


开本页数

IEC 60544-1-1994电器绝缘材料.确定电离辐射的影响.第1部分:辐射的互作用

和剂量测定

Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1:Radiation interaction and dosimetry61P;A4

IEC 60544-2-1991确定电离辐射对绝缘材料影响的导则.第2部分:辐照和试验

规程

Guide for determining the effects of ionizing radiation on insulating materials; part 2: proceduresfor irradiation and test39P;A4

IEC 60544-4-1985确定电离辐射对绝缘材料影响的导则.第4部分:在辐射环境

中工作的分类体系

Guide for determining the effects of ionizing radiation on insulating materials. Part 4 :Classification system for service in radiation environments15P;A4

IEC 60544-5-2003电绝缘材料.确定电离辐射的影响.第5部分:在使用过程中的

老化评定方法

Electrical insulating materials - Determination of the effects of ionizing radiation - Part 5:Procedures for assessment of ageing in service74P;A4

IEC 60545-1976 水轮机试运转、运行和维护导则Guide for commissioning, operation and maintenance of hydraulic turbines41P;A4

IEC 60546-1-1987 模拟信号控制器性能的评定方法.第1部分:性能估定法Controllers with analogue signals for use in industrial-process control systems. Part 1: Methodsof evaluating the performance.

IEC 60546-2-1987 模拟信号控制器性能的评定方法.第2部分:检验和常规试验

指南

Controllers with analogue signals for use in industrial-process control systems. Part 2: Guidancefor inspection and routine testing.

IEC 60547 AMD 1-1985基于NIM标准(用于核电子仪器)的插件单元和标准19英寸

机架安装单元.第1次修改

Modular plug-in unit and standard 19-inch rack mounting unit based on NIM standard (forelectronic nuclear instruments)

IEC 60547-1976基于NIM标准(用于核电子仪器)的插件单元和标准19英寸

机架安装单元

Modular plug-in unit and standard 19-inch rack mounting unit based on NIM standard (forelectronic nuclear instruments)23P;A4

IEC 60548-1976 取样示波器性能的表示法Expression of the properties of sampling oscilloscopes97P;A4

IEC 60549-1976 并联电力电容器外部保护用高压熔断器High-voltage fuses for the external protection of shunt power capacitors24P;A4

IEC 60552 AMD 1-1984CAMAC-多机箱系统组织.分支信息通道和A1型CAMAC机

箱控制器规范.第1次修改

CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMACcrate controller Type A1

IEC 60552-1977CAMAC-多机箱系统组织.分支信息通道和A1型CAMAC机

箱控制器规范

CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMACcrate controller Type A177P;A4

IEC 60554-1 AMD 1-1983 电工用纤维素纸规范.第1部分:定义和一般要求.第1次修改Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and generalrequirements

IEC 60554-1-1977 电工用纤维素纸规范.第1部分:定义和一般要求Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and generalrequirements11P;A4

IEC 60554-2-2001 电工用纤维素纸.第2部分:试验方法Cellulosic papers for electrical purposes - Part 2: Methods of test69P;A4

（134） 351

IEC标准目录


开本页数

IEC 60554-3-1-1979电工用纤维素纸规范.第3部分:单项材料规范.第1活页:一般

用途电工纸

Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individualmaterials. Sheet 1: General purpose electrical paper19P;A4

IEC 60554-3-2-1983电工用纤维素纸规范.第3部分:单项材料规范.第2活页:电容

器纸

Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individualmaterials. Sheet 2: Capacitor paper17P;A4

IEC 60554-3-3-1980电工用纤维素纸规范.第3部分:单项材料规范.第3活页:皱纹

纸

Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individualmaterials. Sheet 3: Crepe paper11P;A4

IEC 60554-3-4-1979电工用纤维素纸规范.第3部分:单项材料规范.第4活页:电解

电容器纸

Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individualmaterials. Sheet 4: Electrolytic capacitor paper9P;A4

IEC 60554-3-5-1984电工用纤维素纸规范.第3部分:单项材料规范.第5活页:专用

纸

Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individualmaterials. Sheet 5: Special papers35P;A4

IEC 60556 AMD 1-1997 用于微波频率的旋磁材料性能的测量方法.补充件1Measuring methods for properties of gyromagnetic materials intended for application atmicrowave frequencies; Amendment 19P;A4

IEC 60556-1982 用于微波频率的旋磁材料性能的测量方法

Measuring methods for properties of gyromagnetic materials intended for application atmicrowave frequencies103P;A4

IEC 60557-1982 核反应堆领域的IEC术语I E C terminology in the nuclear reactor field13P;A4

IEC 60558 AMD 1-1987 C型螺旋扫描磁带录像机.第1次修改Type C helical video tape recorders6P;A4

IEC 60558 AMD 2-1993 第2次修改Type C helical video tape recorders; amendment 23P;A4

IEC 60558-1982 C型螺旋扫描磁带录像机Type C helical video tape recorders41P;A4

IEC 60559-1989 微处理机系统的二进制浮点运算Binary floating-point arithmetic for microprocessor systems45P;A4

IEC 60560-1977 电机刷握的定义和术语Definitions and terminology of brush-holders for electrical machines23P;A4

IEC 60562-1976 电子管入射电离辐射的测量Measurements of incidental ionizing radiation from electronic tubes18P;A4

IEC 60564 AMD 1-1981 电阻测量用直流电桥.第1次修改 D.C. bridges for measuring resistance

IEC 60564 AMD 2-1997 电阻测量用直流电桥.第2次修订DC bridges for measuring resistance; Amendment 25P;A4

IEC 60564-1977 电阻测量用直流电桥D.C. bridges for measuring resistance33P;A4

（135） 351

IEC标准目录


开本页数

IEC 60565-1977 水听器的校准Calibration of hydrophones90P;A4

IEC 60565A-1980 第1次补充Calibration of hydrophones.24P;A4

IEC 60567-1992 充油电气设备中气体和油的取样以及游离气体和溶解气体的分析导则

Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysisof free and dissolved gases81P;A4

IEC 60568-1977 动力反应堆内中子注量率(通量)测量用燃料芯体仪器 Incore instrumentation for the measurement of fluence in power reactors

IEC 60570-2003 灯具用电源导轨装置Electrical supply track systems for luminaires50P;A4

IEC 60571-1998 铁路车辆用电子设备Electronic equipment used on rail vehicles91P;A4

IEC 60574-10 AMD 2-1989视听、视频和电视设备及系统.第10部分:音频盒式系统.第2次修改

Audiovisual, video and television equipment and systems; part 10: audio cassette systems;amendment No. 2 incorporating amendment No. 1 (1988) to IEC 60574-10:19833P;A4

IEC 60574-10-1983 视听、视频和电视设备及系统.第10部分:音频盒式系统Audio-visual, video and television equipment and systems. Part 10 : Audio cassette systems20P;A4

IEC 60574-11-1987 视听、视频和电视设备及系统.第11部分:录像系统用于阅

读的操作规程

Audiovisual, video and television equipment and systems. Part 11: Video recording systems -Operating practices to facilitate browsing.

IEC 60574-1-1977 视听、视频和电视设备及系统.第1部分:总则Audio-visual, video and television equipment and systems. Part 1 : General15P;A4

IEC 60574-13-1982视听、视频和电视设备及系统.第13部分:音频盒式系统用

数字计数器

Audio-visual, video and television equipment and systems. Part 13 : Digital counter for audiocassette systems6P;A4

IEC 60574-14 AMD 1-1988视听、视频和电视设备及系统.第14部分:带式录音卡系统.第1次修改

Audio-visual, video and television equipment and systems; part 14: audio striped card system;amendment No. 1 to IEC 60574-14:19835P;A4

IEC 60574-14-1983 视听、视频和电视设备及系统.第14部分:带式录音卡系统Audio-visual, video and television equipment and systems. Part 14 : Audio striped card system11P;A4

IEC 60574-15-1984 视听、视频和电视设备及系统.第15部分:录音页Audio-visual, video and television equipment and systems. Part 15 : Audio pages9P;A4

IEC 60574-16-1987视听、视频和电视设备及系统.第16部分:教育录音盒的标

记

Audio-visual, video and television equipment and systems. Part 16 : Labelling for educationalaudio cassettes9P;A4

IEC 60574-17-1989 视听、视频和电视设备与系统.第17部分:音频学习系统Audiovisual, video and television equipment and systems; part 17: audio-learning systems37P;A4

IEC 60574-18-1987 视听、视频和电视设备及系统.第18部分:声像应用的自动

幻灯片放映机与内装双向三极管开关的连接器

Audiovisual, video and television equipment and systems. Part 18: Connectors for automaticslide projectors with built-in-triacs for audiovisual application.

IEC 60574-20-1988 视听、视频和电视设备及系统.第20部分:16mm有声电影胶

片放映机的性能测量和报导方法

Audiovisual, video and television equipment and systems. Part 20: Methods of measuring andreporting the performance of 16 mm sound film projectors

（136） 351

IEC标准目录


开本页数

IEC 60574-21-1992视听、视频和电视设备及系统.第21部分:教育和培训用录

相磁带片头和片尾

Audiovisual, video and television equipment and systems; part 21: video tape leader and trailerfor education and training applications11P;A4

IEC 60574-2-1992 视听、视频和电视设备及系统.第2部分:一般术语的定义Audiovisual, video and television equipment and systems; part 2: definition of general terms29P;A4

IEC 60574-3-1983视听、视频和电视设备及系统.第3部分:视听系统中设备互

连用连接器

Audio-visual, video and television equipment and systems. Part 3 : Connectors for theinterconnection of equipment in audio-visual systems23P;A4

IEC 60574-5-1980视听、视频和电视设备及系统.第5部分:控制、同步和地址

码.第I章:同步磁带/视像操作习惯作法

Audiovisual, video and television equipment and systems. Part 5: Control, synchronization andaddress codes. Chapter I: Synchronized tape/visual operating practice15P;A4

IEC 60574-5-2-1983视听、视频和电视设备及系统.第5部分:控制、同步和地址

码.第Ⅱ章:同步磁带/视像操作习惯作法

Audio-visual, video and television equipment and systems. Part 5 : Control synchronization andaddress codes. Chapter II: Control systems for two still projectors - Operating practice17P;A4

IEC 60574-7-1987视听、视频和电视设备及系统.第7部分:声像设备的安全操

作和运行

Audio-visual, video and television equipment and systems. Part 7 : Safe handling and operationof audiovisual equipment19P;A4

IEC 60574-8 AMD 1-1988 第1次修改 Audiovisual, video and television equipment and systems. Part 8: Symbols and identification

IEC 60574-8-1979 视听、视频和电视设备及系统.第8部分:符号和标识Audio-visual, video and television equipment and systems. Part 8 : Symbols and identification15P;A4

IEC 60576-1977 便携式钻孔测井设备(深至300m).一般特性Portable bore-hole logging equipment (down to 300m). General characteristics37P;A4

IEC 60579-1977 放射性气溶胶污染测量仪和监视仪Radioactive aerosol contamination meters and monitors55P;A4

IEC 60580-2000 医用电气设备.剂量面积仪Medical electrical equipment - Dose area product meters32P;A4

IEC 60581-10-1986 高保真音响设备和系统. 低性能要求.第10部分:头戴式耳

机

High fidelity audio equipment and systems; Minimum performance requirements. Part 10 :Headphones

IEC 60581-1-1977 高保真音响设备和系统. 低性能要求.第1部分:总则High fidelity audio equipment and systems; Minimum performance requirements. Part 1 : General7P;A4

IEC 60581-12-1988 高保真音响设备和系统. 低性能要求.第12部分:电视调谐

器的声音输出

High fidelity audio equipment and systems; Minimum performance requirements. Part 12: Soundoutput of television tuners

IEC 60581-13-1988高保真音响设备和系统. 低性能要求.第13部分:车辆用高

保真装置:调频无线电调谐部件

High fidelity audio equipment and systems; Minimum performance requirements. Part 13: Highfidelity systems for use in vehicles (for example, motor cars): FM radio tuner units

IEC 60581-3-1978高保真音响设备和系统. 低性能要求.第3部分:唱机设备和

拾音器心座

High fidelity audio equipment and systems; Minimum performance requirements. Part 3 : Recordplaying equipment and cartridges11P;A4

IEC 60581-4-1979高保真音响设备和系统. 低性能要求.第4部分:磁带录音和

放音设备

High fidelity audio equipment and systems; Minimum performance requirements. Part 4 :Magnetic recording and reproducing equipment13P;A4

（137） 351

IEC标准目录


开本页数

IEC 60581-5-1981 高保真音响设备和系统. 低性能要求.第5部分:传声器High fidelity audio equipment and systems; Minimum performance requirements. Part 5 :Microphones

IEC 60581-7-1986 高保真音响设备和系统. 低性能要求.第7部分:扬声器High fidelity audio equipment and systems; Minimum performance requirements. Part 7 :Loudspeakers21P;A4

IEC 60581-8-1986 高保真音响设备和系统. 低性能要求.第8部分:组合设备High fidelity audio equipment and systems; Minimum performance requirements. Part 8 :Combination equipment43P;A4

IEC 60582-1977 液体闪烁计数用瓶的尺寸Dimensions of vials for liquid scintillation counting7P;A4

IEC 60583-1977 放射性测量用玻璃或塑料制试管的尺寸Dimensions of test tubes made of glass or plastics for radioactivity measurements7P;A4

IEC 60583A-1981 第1次补充Dimensions of test tubes made of glass or plastics for radioactivity measurements.5P;A4

IEC 60584-1-1995 热电偶.第1部分:分度表Thermocouples - Part 1: Reference tables155P;A4

IEC 60584-2 AMD 1-1989 热电偶.第2部分:容差.修改件1Thermocouples; part 2: tolerances; amendment 1 to IEC 60584-2:19825P;A4

IEC 60584-2-1982 热电偶.第2部分:公差Thermocouples. Part 2 : Tolerances2P;A4

IEC 60584-3-1989 热电偶.第3部分:加长电缆和补偿电缆.容差和鉴定系统Thermocouples; part 3: extension and compensating cables; tolerances and identification system9P;A4

IEC 60587-1984 评定电气绝缘材料在严酷环境条件下使用时耐起痕和耐腐蚀性的试验方法

Test methods for evaluating resistance to tracking and erosion of electrical insulating materialsused under severe ambient conditions19P;A4

IEC 60588-1-1977 变压器和电容器用氯化联苯.第1部分:总则Askarels for transformers and capacitors. Part 1 : General9P;A4

IEC 60588-2-1978 变压器和电容器用氯化联苯.第2部分:试验方法Askarels for transformers and capacitors. Part 2 : Test methods45P;A4

IEC 60588-3-1977 变压器和电容器用氯化联苯.第3部分:新氯化联苯规范Askarels for transformers and capacitors. Part 3 : Specifications for new askarels19P;A4

IEC 60588-4-1979变压器和电容器用氯化联苯.第4部分:设备中变压器用氯化

联苯维护导则

Askarels for transformers and capacitors. Part 4 : Guide for maintenance of transformer askarelsin equipment31P;A4

IEC 60588-5-1979变压器和电容器用氯化联苯.第5部分:材料与变压器用氯化

联苯兼容性的筛选试验

Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials andtransformer askarels11P;A4

IEC 60588-6-1979变压器和电容器用氯化联苯.第6部分:材料对电容器用氯化

联苯影响的筛选试验

Askarels for transformers and capacitors. Part 6 : Screening test for effects of materials oncapacitor askarels14P;A4

（138） 351

IEC标准目录


开本页数

IEC 60589-1977 测定电气绝缘材料中离子杂质的液体萃取试验方法

Methods of test for the determination of ionic impurities in electrical insulating materials byextraction with liquids13P;A4

IEC 60590-1977 新矿物绝缘油中芳香烃含量的测定Determination of the aromatic hydrocarbon content of new mineral insulating oils17P;A4

IEC 60591-1978公称电压高于1000v的架空线路用陶瓷材料或玻璃绝缘子

采用统计控制方法进行机械和机电试验时的取样规则和验收准则

Sampling rules and acceptance criteria when applying statistical control methods for mechanicaland electromechanical tests on insulators of ceramic material or glass for overhead lines with anominal voltage greater than 1 000 V24P;A4

IEC 60593 AMD 1-1980 并联电容器的内部熔断器和内部过压力隔离器.修改件1 Internal fuses and internal overpressure disconnectors for shunt capacitors

IEC 60593 AMD 2-1986 并联电容器的内部熔断器和内部过压力隔离器.第2次修改 Internal fuses and internal overpressure disconnectors for shunt capacitors

IEC 60594 AMD 2-1987 第2次修改Internal fuses and internal overpressure disconnectors for capacitors for inductive heatgenerating plants

IEC 60594-1977 感应加热装置用电容器的内部熔断器和内部过压力隔离器

Internal fuses and internal overpressure disconnectors for capacitors for inductive heatgenerating plants28P;A4

IEC 60595 AMD 2-1987 串联电容器的内部熔断器.第2次修改 Internal fuses for series capacitors

IEC 60598-1-1999 灯具.第1部分:总要求和试验Luminaires - Part 1: General requirements and tests351P;A4

IEC 60598-2-1 AMD 1-1987 灯具.第2部分:特殊要求.普通固定式灯具Luminaires. Part 2 : Particular requirements. Fixed general purpose luminaires3P;A4

IEC 60598-2-10 AMD 1-1990灯具.第2部分:特殊要求.第10节:儿童用便携式灯及有关设

备.第1次修改

Luminaires; part 2: particular requirements; section ten: portable child-appealing luminaires;amendment 1 to IEC 60598-2-10:19873P;A4

IEC 60598-2-10 AMD 2-1995灯具.第2部分:特殊要求.第10节:便携式儿童趣味灯.第2次修改

Luminaires - Part 2: Particular requirements - Section 10: Portable child-appealing luminaires;Amendment 23P;A4

IEC 60598-2-10-1987 灯具.第2部分:特殊要求.第10节:儿童用便携式灯及有关设 Luminaires. Part 2: Particular requirements. Section Ten - Portable child-appealing luminaires

IEC 60598-2-1-1979 灯具.第2部分:特殊要求.普通固定式灯具Luminaires. Part 2 : Particular requirements. Fixed general purpose luminaires*Requirement9P;A4

IEC 60598-2-17 AMD 2-1990灯具.第2部分:特殊要求.第17节:舞台照明、电视和电影摄

影场(室内外)用灯具.第2次修改

Luminaires; part 2: particular requirements; section seventeen: luminaires for stage lighting,television, film and photographic studios (outdoor and indoor); amendment 2 to IEC 60598-2-17:1984

IEC 60598-2-17-1984灯具.第2部分:特殊要求.第17节:舞台照明、电视和电影摄

影场(室内外)用灯具

Luminaires. Part 2 : Particular requirements. Section seventeen - Luminaires for stage lighting,television and film studios (outdoor and indoor)15P;A4

IEC 60598-2-18-1993 灯具.第2部分:特殊要求.第18节:游泳池和类似用途的灯具Luminaires; part 2: particular requirements; section 18: luminaires for swimming pools and similarapplications14P;A4

（139） 351

IEC标准目录


开本页数

IEC 60598-2-19 AMD 1-1987 灯具.第2部分:特殊要求.第19节:空气控制灯具(安全要求).第1次修改

Luminaires. Part 2 : Particular requirements. Air-handling luminaires. Safety requirements

IEC 60598-2-19 AMD 2-1997灯具.第2部分:特殊要求.第19节:空气处理灯具(安全要求).第2次修改

Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safetyrequirements); Amendment 23P;A4

IEC 60598-2-19-1981 灯具.第2部分:特殊要求.空气处理灯具(安全要求)Luminaires. Part 2 : Particular requirements. Air-handling luminaires. Safety requirements19P;A4

IEC 60598-2-2 Edition 2.1-1997 灯具.第2部分:特殊要求.第2节:凹槽式灯具Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires15P;A4

IEC 60598-2-20 Edition 2.1-1998

灯具.第2-20部分:特殊要求.照明线Luminaires - Part 2-20: Particular requirements - Lighting chains31P;A4

IEC 60598-2-20 Edition 2.2-2002

灯具.第2-20部分:照明器用链的特殊要求Luminaires - Part 2-20: Particular requirements; Lighting chains33P;A4

IEC 60598-2-20-1998 灯具.第2-20部分:特殊要求.照明器用链Luminaires - Part 2-20: Particular requirements - Lighting chains31P;A4

IEC 60598-2-2-1997 灯具.第2部分:特殊要求.第2节:凹槽式灯具Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires15P;A4

IEC 60598-2-22 AMD 1-2002 灯具.第2-22部分:凹槽式灯具的特殊要求.修改件1Luminaires - Part 2-22: Particular requirements; Luminaires for emergency lighting; Amendment1

IEC 60598-2-22 Edition 3.1-2002

灯具.第2-22部分:特殊要求.应急照明灯具Luminaires - Part 2-22: Particular requirements; Luminaires for emergency lighting45P;A4

IEC 60598-2-22-1997 灯具.第2-22部分:特殊要求.事故照明用灯具Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting47P;A4

IEC 60598-2-23 AMD 1-2000照明器具.第2-23部分:特殊要求.白热丝灯用备用超低压照

明系统.修改件1

Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filamentlamps

IEC 60598-2-23 Edition 1.1-2001

灯具.第2-23部分:特殊要求.白热丝灯超低压照明系统Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filamentlamps

IEC 60598-2-23-1996照明器具.第2部分:特殊要求.第23节:白热丝灯用备用超低

压照明系统

Luminaires - Part 2: Particular requirements - Section 23: Extra low voltage lighting systems forfilament lamps18P;A4

IEC 60598-2-24-1997 灯具.第2-24部分:特殊要求.带有限表面温度的灯具Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures13P;A4

IEC 60598-2-25-1994照明设备.第2部分:特殊要求.第25节:医院和医疗保健中心

临床用灯具

Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas ofhospitals and health care buildings27P;A4

IEC 60598-2-3-2002 灯具.第2-3部分:特殊要求.道路和街道照明用灯具Luminaires - Part 2-3: Particular requirements; Luminaires for road and street ligthing31P;A4

IEC 60598-2-4-1997灯具.第2部分:特殊要求.第4节:便携式通用灯具(IEC 598-2-4-79+AMD 1-83+AMD 2-87,修订)

Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires13P;A4

（140） 351

IEC标准目录


开本页数

IEC 60598-2-5-1998 灯具.第2-5部分:特殊要求.泛光灯Luminaires - Part 2-5: Particular requirements - Floodlights15P;A4

IEC 60598-2-6 AMD 1-1996灯具.第2部分:特殊要求.第6节:白炽灯用带有插入变压器的

灯具.第1次修改

Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers forfilament lamps; Amendment 17P;A4

IEC 60598-2-6-1994灯具.第2部分:特殊要求.第6节:白炽灯用带有插入变压器的

灯具

Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers forfilament lamps19P;A4

IEC 60598-2-7 AMD 1-1987 灯具.第2部分:特殊要求.第7节:庭园用便携式灯具.第1次修 Luminaires. Part 2 : Particular requirements. Portable luminaires for garden use

IEC 60598-2-7 AMD 2-1994 第2次修改Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden use;Amendment 25P;A4

IEC 60598-2-7-1982 灯具.第2部分:特殊要求.庭园用便携式灯具Luminaires. Part 2 : Particular requirements. Portable luminaires for garden use11P;A4

IEC 60598-2-8 AMD 1-2000 灯具.第2-8部分:特殊要求.手提灯.修改件1Luminaires - Part 2-8: Particular requirements - Handlamps; Amendment 13P;A4

IEC 60598-2-8 Edition 2.1-2001 灯具.第2-8部分:特殊要求.手提灯Luminaires - Part 2-8: Particular requirements - Handlamps25P;A4

IEC 60598-2-8-1996 灯具.第2部分:特殊要求.第8节:手提灯Luminaires - Part 2: Particular requirements - Section 8: Handlamps24P;A4

IEC 60598-2-9 AMD 1-1993 第1次修改Luminaires; part 2: particular requirements; section 9: photo and film luminaires (non-professional); amendment 15P;A4

IEC 60598-2-9-1987 灯具.第2部分:特殊要求.第9节:摄影和电影灯具(非专业性

的)

Luminaires; part 2: particular requirements; section nine: photo and film luminaires (non-professional)

IEC 60599-1999 矿物油浸渍的电气设备.不溶解的和自由气体分析说明指南Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolvedand free gases analysis69P;A4

IEC 60600-1979 坑口分析和容器中放射性矿物分选用设备Equipment for minehead assay and sorting radioactive ores in containers19P;A4

IEC 60601-1 AMD 1-1991 第1次修改Medical electrical equipment; part 1: general requirements for safety; amendment 151P;A4

IEC 60601-1 AMD 2-1995 医疗电器设备.第1部分:安全的通用要求.第2次修改Medical electrical equipment - Part 1: General requirements for safety; Amendment 291P;A4

IEC 60601-1-1-2000医用电气设备.第1-1部分:安全的一般要求.对照标准.医用

电气系统的安全要求

Medical electrical equipment - Part 1-1: General requirements for safety; Collateral standard:Safety requirements for medical electrical systems57P;A4

IEC 60601-1-1988 医用电气设备.第1部分:安全的通用要求Medical electrical equipment; part 1: general requirements for safety351P;A4

（141） 351

IEC标准目录


开本页数

IEC 60601-1-2-2001医用电气设备.第1-2部分:通用安全要求.并行标准.电磁兼

容性.要求和试验

Medical electrical equipment - Part 1-2: General requirements for safety; Collateral standard:Electromagnetic compatibility; Requirements and tests93P;A4

IEC 60601-1-3-1994医疗电器设备.第1部分:安全通用要求.第3节:附属标准-X射线诊断设备射线防护的总要求

Medical electrical equipment - Part 1: General requirements for safety - 3. Collateral standard:General requirements for radiation protection in diagnostic X-ray equipment99P;A4

IEC 60601-1-4 AMD 1-1999医疗电气设备.第1-4部分:安全的一般要求.第4节:对照标准:程序控制的电气医疗系统.修改件1

Medical electrical equipment - Part 1-4: General requirements for safety - Collateral standard:Programmable electrical medical systems; Amendment 115P;A4

IEC 60601-1-4 Edition 1.1-2000医用电气设备.第1-4部分:安全的一般要求.并行的标准:可程序化的医用电气设备

Medical electrical equipment - Part 1-4: General requirements for safety - Collateral standard:Programmable electrical medical systems65P;A4

IEC 60601-2-1 AMD 1-2002医疗电气设备.第2-1部分:1-50MeV范围内医用电子加速器

安全的特殊要求.修改件1

Medical electrical equipment - Part 2-1: Particular requirements for the safety of electronaccelerators in the range 1 MeV to 50 MeV; Amendment 14P;A4

IEC 60601-2-10 AMD 1-2001医疗电气设备.第2-10部分:神经和肌肉刺激器安全性的特

殊要求.修改件1

Medical electrical equipment - Part 2-10: Particular requirements for the safety of nerve andmuscle stimulators; Amendment 19P;A4

IEC 60601-2-10-1987医疗电气设备.第2部分:神经和肌肉刺激器安全性的特殊要

求

Medical electrical equipment; part 2: particular requirements for the safety of nerve and musclestimulators35P;A4

IEC 60601-2-11-1997医疗电气设备.第2部分第11节:γ射线治疗设备安全的特殊

要求

Medical electrical equipment - Part 2: Particular requirements for the safety of gamma beamtherapy equipment95P;A4

IEC 60601-2-1-1998医用电气设备.第2-1部分:在1MeV至50MeV范围的电子加

速器安全的特殊要求

Medical electrical equipment - Part 2-1: Particular requirements for the safety of electronaccelerators in the range 1 MeV to 50 MeV131P;A4

IEC 60601-2-12-2001医疗电气设备.第2-12部分:医用附助肺部呼吸装置通风机

的安全性的特殊要求.特护通风机

Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators;Critical care ventilators42P;A4

IEC 60601-2-13-1998 医疗电气设备.第2-13部分:麻醉工作台安全的特殊要求Medical electrical equipment - Part 2-13: Particular requirements for the safety of anaestheticworkstations

IEC 60601-2-15-1988医疗电气设备.第2部分第15节:电容器放电式X射线发生器

安全的特殊要求

Medical electrical equipment; part 2: particular requirements for the safety of capacitor dischargeX-ray generators77P;A4

IEC 60601-2-16-1998医用电气设备.第2-16部分:血液透析,血液透析过滤和血液

过滤设备安全的特殊要求

Medical electrical equipment - Part 2-16: Particular requirements for safety of haemodialysis,haemodiafiltration and haemofiltration equipment25P;A4

（142） 351

IEC标准目录


开本页数

IEC 60601-2-17 AMD 1-1996医疗电气设备.第2部分第17节:移动式自动控制γ射线后源

装设备安全的特殊要求.补充件1

Medical electrical equipment - Part 2: Particular requirements for the safety of remote-controlledautomatically-driven gamma-ray afterloading equipment; Amendment 115P;A4

IEC 60601-2-17-1989医用电气设备.第2-17部分:遥控自动驱动式γ射线后装设备

安全的特殊要求

Medical electrical equipment; part 2: particular requirements for the safety of remote-controlledautomatically-driven gamma-ray afterloading equipment51P;A4

IEC 60601-2-18 AMD 1-2000医疗电气设备.第2-18部分:内窥镜设备安全的特殊要求.修改件1

Medical electrical equipment - Part 2-18: Particular requirements for the safety of endoscopicequipment; Amendment 110P;A4

IEC 60601-2-18-1996 医疗电气设备.第2部分:内窥镜设备安全的特殊要求Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopicequipment

IEC 60601-2-19 AMD 1-1996医疗电气设备.第2部分第19节:婴儿保育箱的特殊安全要求.修改件1

Medical electrical equipment - Part 2: Particular requirements for safety of baby incubators;Amendment 127P;A4

IEC 60601-2-19-1990 医疗电气设备.第2部分:婴儿恒温箱的安全性的特殊要求Medical electrical equipment; part 2: particular requirements for safety of baby incubators57P;A4

IEC 60601-2-20 AMD 1-1996医疗电气设备.第2部分第20节:运输型婴儿保育箱的特殊安

全要求.修改件1

Medical electrical equipment - Part 2: Particular requirements for the safety of transportincubators; Amendment 121P;A4

IEC 60601-2-20-1990 医疗电气设备.第2部分:运输型婴儿恒温箱的安全性的特殊

要求

Medical electrical equipment; part 2: particular requirements for safety of transport incubators61P;A4

IEC 60601-2-21 AMD 1-1996医疗电气设备.第2部分第21节:婴儿保温箱的特殊要求.修改

件1

Medical electrical equipment - Part 2: Particular requirements for the safety of infant radiantwarmers; Amendment 117P;A4

IEC 60601-2-21-1994 医疗电气设备.第2部分:婴儿保温箱安全性的特殊要求Medical electrical equipment; part 2: particular requirements for the safety of infant radiantwarmers

IEC 60601-2-2-1998 医疗电气设备.第2-2部分:高频手术设备安全性的特殊要求Medical electrical equipment -Part 2-2: Particular requirements for the safety of high frequencysurgical equipment43P;A4

IEC 60601-2-22-1995医疗电气设备.第2部分:诊断和治疗用激光设备安全性特殊

要求

Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic andtherapeutic laser equipment53P;A4

IEC 60601-2-23-1999医疗电气设备.第2-23部分:包括基本性能部分压力检测设

备的特殊要求

Medical electrical equipment - Part 2-23: Particular requirements for the safety, includingessential performance, of transcutaneous partial pressure monitoring equipment35P;A4

IEC 60601-2-24-1998医疗电气设备.第2部分第24节:注射泵和调节器安全的特殊

安全要求

Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumpsand controllers63P;A4

（143） 351

IEC标准目录


开本页数

IEC 60601-2-25 AMD 1-1999医疗电气设备.第2-25部分:心电图扫描仪安全性的特殊要

求.修改件1

Medical electrical equipment - Part 2-25: Particular requirements for the safety ofelectrocardiographs; Amendment 113P;A4

IEC 60601-2-25-1993 医疗电气设备.第2-25部分:心电图仪安全性的特殊要求Medical electrical equipment; part 2: particular requirements for the safety of electrocardiographs59P;A4

IEC 60601-2-26-2002 医用电气设备.第2-26部分:脑电图机安全的特殊要求Medical electrical equipment - Part 2-26: Particular requirements for the safety ofelectroencephalographs20P;A4

IEC 60601-2-27-1994医疗电气设备.第2部分第27节:心电描速器监视设备安全的

特殊要求

Medical electrical equipment - Part 2: Particular requirements for the safety ofelectrocardiographic monitoring equipment59P;A4

IEC 60601-2-28-1993医疗电气设备.第2部分第28节:医疗诊断设备用X射线源组

件和X射线管组件的特殊安全要求

Medical electrical equipment; part 2: particular requirements for the safety of X-ray sourceassemblies and X-ray tube assemblies for medical diagnosis41P;A4

IEC 60601-2-29-1999 医用电气设备.第2-29部分:辐射模拟安全的特殊要求Medical electrical equipment - Part 2-29: Particular requirements for the safety of radiotherapysimulators

IEC 60601-2-3 AMD 1-1998 医疗电气设备.第2-3部分:短波治疗设备安全的特殊要求Medical electrical equipment - Part 2: Particular requirements for the safety of short-wave therapyequipment; Amendment 16P;A4

IEC 60601-2-30-1999医疗电气设备.第2-30部分:自动循环非侵入式血压监控设

备的安全(包括主要性能)的特殊要求

Medical electrical equipment - Part 2-30: Particular requirements for the safety, includingessential performance, of automatic cycling non-invasive blood pressure monitoring equipment45P;A4

IEC 60601-2-31 AMD 1-1998医疗电气设备.第2-31部分:带有内电源的外部心脏起搏器

的特殊安全要求.第1次修订

Medical electrical equipment - Part 2-31: Particular requirements for the safety of external cardiacpacemakers with internal power source; Amendment 18P;A4

IEC 60601-2-31-1994医疗电器设备.第2部分:具有内部功率源的外部心脏起搏器

的特殊安全要求

Medical electrical equipment - Part 2: Particular requirements for the safety of external cardiacpacemakers with internal power source63P;A4

IEC 60601-2-3-1991 医疗电气设备.第2-3部分:短波治疗设备安全性的特殊要求Medical electrical equipment; part 2: particular requirements for the safety of short-wave therapyequipment39P;A4

IEC 60601-2-32-1994 医疗电气设备.第2部分第32节:X射线设备安全的特殊要求Medical electrical equipment; part 2: particular requirements for the safety of X-ray equipment39P;A4

IEC 60601-2-33-2002医用电气设备.第2-33部分:医疗诊断用磁共振设备安全的

特殊要求

Medical electrical equipment - Part 2-33: Particular requirements for the safety of magneticresonance equipment for medical diagnosis83P;A4

IEC 60601-2-34-2000医疗电气设备.第2-34部分:侵入式血压监测仪器安全性(包括基本性能)的特殊要求

Medical electrical equipment - Part 2-34: Particular requirements for the safety, includingessential performance, of invasive blood pressure monitoring equipment59P;A4

（144） 351

IEC标准目录


开本页数

IEC 60601-2-35-1996医疗电器设备.第2部分第35节:医疗保温的预订计划及毛毯

、衬垫和坐垫安全的特殊要求.

Medical electrical equipment - Part 2: Particular requirements for the safety of blankets, pads andmattresses, intended for heating in medical use95P;A4

IEC 60601-2-36-1997 医用电气设备.第2部分:体外感应碎石机安全的特殊要求Medical electrical equipment - Part 2: Particular requirements for the safety of equipment forextracorporeally induced lithotripsy35P;A4

IEC 60601-2-37-2001医疗电气设备.第2-37部分:超声医疗诊断和监测设备安全

的特殊要求

Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonicmedical diagnostic and monitoring equipment62P;A4

IEC 60601-2-38 AMD 1-1999 医疗电气设备.第2-38部分:电控病床安全的特殊要求Medical electrical equipment - Part 2-38: Particular requirements for the safety of electricallyoperated hospital beds; Amendment 115P;A4

IEC 60601-2-38-1996医疗电器设备.第2部分第38节:电动医院用床安全的特殊要

求.

Medical electrical equipment - Part 2: Particular requirements for the safety of electricallyoperated hospital beds69P;A4

IEC 60601-2-39-1999 医疗电气设备.第2-39部分:腹膜透析仪安全性的特殊要求Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritonealdialysis equipment13P;A4

IEC 60601-2-40-1998医疗电气设备.第2-40部分:肌电图仪和激发响应设备安全

的特殊要求

Medical electrical equipment - Part 2-40: Particular requirements for the safety ofelectromyographs and evoked response equipment35P;A4

IEC 60601-2-41-2000医疗电气设备.第2-41部分:外科手术灯和诊断用灯的安全

性的特殊要求

Medical electrical equipment - Part 2-41: Particular requirements for the safety of surgicalluminaires and luminaires for diagnostic38P;A4

IEC 60601-2-4-2002 医用电气设备.第2-4部分:心脏除颤器安全的特殊要求Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiacdefibrillators

IEC 60601-2-43-2000医疗电气设备.第2-43部分:处置过程用X射线设备安全性的

特殊要求

Medical electrical equipment - Part 2-43: Particular requirements for the safety of X-rayequipment for interventional procedures36P;A4

IEC 60601-2-44 AMD 1-2002医用电气设备.第2-44部分:计算机断层摄影用X射线设备安

全的特殊要求.修改1

Medical electrical equipment - Part 2-44: Particular requirements for the safety of X-rayequipment for computed tomography; Amendment 17P;A4

IEC 60601-2-44 Edition 2.1-2002

医用电气设备.第2-44部分:X射线计算机体层摄影设备安全

的特殊要求

Medical electrical equipment - Part 2-44: Particular requirements for the safety of X-rayequipment for computed tomography36P;A4

IEC 60601-2-44-2001医用电气设备.第2-44部分:计算机断层摄影用X射线设备安

全的特殊要求

Medical electrical equipment - Part 2-44: Particular requirements for the safety of X-rayequipment for computed tomography34P;A4

（145） 351

IEC标准目录


开本页数

IEC 60601-2-45-2001医疗电气设备.第2-45部分:乳腺X光设备和乳腺定位装置的

安全性的特殊要求

Medical electrical equipment - Part 2-45: Particular requirements for the safety of mammographicX-ray equipment and mammographic stereotactic devices42P;A4

IEC 60601-2-46-1998 医疗电气设备.第2-46部分:手术台安全的特殊要求Medical electrical equipment - Part 2-46: Particular requirements for the safety of operatingtables

IEC 60601-2-47-2001医疗电气设备.第2-47部分:不固定的心电图仪的安全(包括

主要性能)的特殊要求

Medical electrical equipment - Part 2-47: Particular requirements for the safety, includingessential performance, of ambulatory electrocardiographic systems44P;A4

IEC 60601-2-49-2001医用电气设备.第2-49部分:多功能病人监测设备安全的特

殊要求

Medical electrical equipment - Part 2-49: Particular requirements for the safety of multifunctionpatient monitoring equipment45P;A4

IEC 60601-2-50-2000医用电气设备.第2-50部分:婴幼儿光治疗设备安全性的特

殊要求

Medical electrical equipment - Part 2-50: Particular requirements for the safety of infantphototherapy equipment24P;A4

IEC 60601-2-51-2003医用电气设备.第2-51部分:单道和多道心电描记器记录和

分析的安全性的特殊要求

Medical electrical equipment - Part 2-51: Particular requirements for the safety, includingessential performance, of recording and analysing single channel and multichannelelectrocardiographs

IEC 60601-2-5-2000 医用电气设备.第2-5部分:超声治疗设备安全的特殊要求Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonicphysiotherapy equipment20P;A4

IEC 60601-2-6-1984医疗电气设备.第2部分第6节:微波治疗设备的安全的特殊

要求

Medical electrical equipment. Part 2: Particular requirements for the safety of microwave therapyequipment35P;A4

IEC 60601-2-7-1998医疗电气设备.第2-7部分:诊断用X射线发生器的高压发生

器安全性的特殊要求

Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltagegenerators of diagnostic X-ray generators42P;A4

IEC 60601-2-8 Edition 1.1-1999医用电气设备.第2-8部分:在10KV-1MV范围操作的治疗X射线设备的安全性的特殊要求.

Medical electrical equipment - Part 2-8: Particular requirements for the safety of therapeutic X-rayequipment operating in the range 10 kV to 1 MV79P;A4

IEC 60601-2-8-1999医用电气设备.第2-8部分:在10KV-1MV范围操作的X-射线

治疗设备的特殊安全要求

Medical electrical equipment - Part 2-8: Particular requirements for the safety of therapeutic X-rayequipment operating in the range 10 kV to 1 MV79P;A4

IEC 60601-2-9-1996医疗电气设备.第2部分第9节:有电连接辐射探测器进行放

射治疗时使用的剂量计规范安全的特殊要求.

Medical electrical equipment - Part 2: Particular requirements for the safety of patient contactdosimeters used in radiotherapy with electrically connected radiation detectors27P;A4

IEC 60601-3-1-1996医用电气设备.第3-1部分:经皮氧分压和二氧化碳分压监护

设备的基本性能要求

Medical electrical equipment - Part 3-1: Essential performance requirements for transcutaneousoxygen and carbon dioxide partial pressure monitoring equipment31P;A4

IEC 60602 AMD 1-1987 B型螺旋扫描录像机.第1次修改 Type B helical video recorders

（146） 351

IEC标准目录


开本页数

IEC 60602-1980 B型螺旋扫描录像机Type B helical video recorders29P;A4

IEC 60603-1 AMD 1-1992印制板用频率低于3MHz的连接器.第1部分:总规范.具有评

定质量的详细规范的总要求和指南.修改件1

Connectors for frequencies below 3 MHz for use with printed boards; part 1: genericspecification; general requirements and guide for the preparation of detail specifications, withassessed quality; amendment 15P;A4

IEC 60603-10-1991印制板用频率低于3MHz的连接器.第10部分:倒置型

2.54mm(0.1in)厚印制电路板双件型连接器

Connectors for frequencies below 3 MHz for use with printed boards; part 10: two-partconnectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type45P;A4

IEC 60603-11-1992印制板用频率低于3MHz的连接器.第11部分:同轴连接器的

详细规范(自由连接器和固定连接器的尺寸)

Connectors for frequencies below 3 MHz for use with printed boards; part 11: detail specificationfor concentric connectors (dimensions for free connectors and fixed connectors)43P;A4

IEC 60603-1-1991印制板用频率低于3MHz的连接器.第1部分:总规范.带质量

评定的一般要求和详细规范的导则

Connectors for frequencies below 3 MHz for use with printed boards; part 1: genericspecification; general requirements and guide for the preparation of detail specifications, withassessed quality

IEC 60603-12-1992印制板用频率低于3MHz的连接器.第12部分:为集成电路用

的插座尺寸、一般要求和试验的详细规范

Connectors for frequencies below 3 MHz for use with printed boards; part 12: detail specificationfor dimensions, general requirements and tests for a range of sockets designed for use withintegrated circuits46P;A4

IEC 60603-13-1995印制电路板用频率低于3MH2的连接器.第13部分:质量评定

双部件连接器,2.54mm(0.1in)印制板和不易绝缘可置换终

端独立连接器详细规范

Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detailspecification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)83P;A4

IEC 60603-14-1998印制电路板用频率低于3MHz的连接器.第14部分:低频音频

和视频用声频,视频和视听设备用圆形连接器的详细规范

Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detailspecification for circular connectors for low-frequency audio and video applications such asaudio, video and audio-visual equipment29P;A4

IEC 60603-2 AMD 1-2000印制板用频率低于3MHz的连接器.第1部分:总规范.具有评

定质量的详细规范的总要求和指南.修改件1

Connectors for frequencies below 3 MHs for use with printed boards - Part 2: Detail specificationfor two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1in) with common mounting features; Amendment 1

IEC 60603-2-1995印制板用频率低于3MHz的连接器.第2部分:具有共同安装

特征的2·54mm(0·1in)基本网格印制电路板用带质量保证的

两对端连接器的详细规范

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specificationfor two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1in) with common mounting features153P;A4

IEC 60603-3-1987印制板用频率低于3MHz的连接器.第3部分:触点中心相隔

距离和交错线端子相隔距离为2.54mm(0.10in)的印制电路

板用两对端连接器

Connectors for frequencies below 3 MHz for use with printed boards. Part 3 : Two-partconnectors for printed boards having contacts spaced 2.54 mm (O.100 in) centres and staggeredterminations at that same spacing33P;A4

（147） 351

IEC标准目录


开本页数

IEC 60603-4-1987印制板用频率低于3MHz的连接器.第4部分:触点中心相隔

距离和交错线端子相隔距离均为1·91mm(0·75in)的印制电

路板用的两对端连接器

Connectors for frequencies below 3 MHz for use with printed boards. Part 4 : Two-partconnectors for printed boards having contacts spaced at 1.91 mm (0.075 in) centres andstaggered terminations at that same spacing35P;A4

IEC 60603-5-1987印制板用频率低于3MHz的连接器.第5部分:有2·54mm(0·70in)间隔的两面印制电路板用边缘插接器和两对端连接器

Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : Edge-socketconnectors and two-part connectors for double-sided printed boards with 2.54 mm (O.1 in)spacing

IEC 60603-6-1987印制板用频率低于3MHz的连接器.第6部分:标称厚度为

1.6mm(0.068in)的单面或双面印制电路板用接点间隔

2.54mm(0.10in)的边缘插接器和印制板连接器

Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge-socketconnectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single ordouble-sided printed boards of 1.6 mm (0.063 in) nominal thickness.

IEC 60603-7-1-2002电气设备用连接器.第7-1部分:有质量评定的具有通用插合

特性的屏蔽的自由和固定连接器的8位连接器详细规范

Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free andfixed connectors with common mating features, with assessed quality147P;A4

IEC 60603-7-1996印制板用频率低于3MHz的连接器.第7部分:有质量评定的

具有通用插合特性的包括固定和自由连接器的8位连接器

的详细规范

Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specificationfor connectors, 8-way, including fixed and free connectors with common mating features, withassessed quality101P;A4

IEC 60603-7-7-2002电子设备用连接器.第7-7部分:有大频率为600MHz的(7类屏蔽)数据传输用8路屏蔽的固定和自由连接器的详细规

范

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free andfixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded)80P;A4

IEC 60603-8-1990印制板用频率低于3MHz的连接器.第8部分:具有0.63mm×0.63mm方形插头的2.54m(0.1in)基本网格印制电路板用两

件式连接器

Connectors for frequencies below 3 MHz for use with printed boards; part 8: two-part connectorsfor printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm ?0,63mm73P A4

IEC 60603-9-1990印制板用频率低于3MHz的连接器.第9部分:2.54mm(0.1in)基本网格印制电路板,底板和电缆连接器用两件式连接器

Connectors for frequencies below 3 MHz for use with printed boards; part 9: two-part connectorsfor printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)129P;A4

IEC 60605-1 AMD 1-1982 设备可靠性试验.第1部分:一般要求.第1次修改 Equipment reliability testing. Part 1 : General requirements

IEC 60605-1-1978 设备可靠性试验.第1部分:一般要求Equipment reliability testing. Part 1 : General requirements66P;A4

IEC 60605-2-1994 设备可靠性试验.第2部分:试验周期的设计Equipment reliability testing - Part 2: Design of test cycles57P;A4

IEC 60605-3-1-1986设备可靠性试验.第3部分:优选试验条件.第1节:低模拟度户

内便携设备

Equipment reliability testing. Part 3 : Preferred test conditions. Indoor portable equipment - Lowdegree of simulation19P;A4

IEC 60605-3-2-1986设备可靠性试验.第3部分:优选试验条件.第2节:固定使用在

有气候防护场所的高模拟度设备

Equipment reliability testing. Part 3 : Preferred test conditions. Equipment for stationary use inweatherprotected locations - High degree of simulation21P;A4

IEC 60605-3-3-1992设备可靠性试验.第3部分:优选试验条件.第3节:第3循环试

验:部分抗大气影响地点使用的固定设备;低程度模拟

Equipment reliability testing; part 3: preferred test conditions; section 3: test cycle 3: equipmentfor stationary use in partially weatherprotected locations; low degree of simulation29P;A4

（148） 351

IEC标准目录


开本页数

IEC 60605-3-4-1992设备可靠性试验.第3部分:优选试验条件.第4节:便携式和非

固定使用的低模拟度设备

Equipment reliability testing; part 3: preferred test conditions; section 4: test cycle 4: equipmentfor portable and non-stationary use; low degree of simulation33P;A4

IEC 60605-3-5-1996设备可靠性试验.第3部分:优选试验条件.第5节:试验循环5:低模拟度地面移动设备

Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Groundmobile equipment - Low degree of simulation35P;A4

IEC 60605-3-6-1996设备可靠性试验.第3部分:优选试验条件.第6节:试验周期6:低模拟度的户外运输设备

Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoortransportable equipment - Low degree of simulation33P;A4

IEC 60605-4-2001设备可靠性试验.第4部分:指数分布的统计方法.点估计、置

信区间、预测区间和公差区间

Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Pointestimates, confidence intervals, prediction intervals and tolerance intervals65P;A4

IEC 60605-6-1997设备可靠性试验.第6部分:恒定失效率和恒定失效强度先决

条件下的有效性试验

Equipment reliability testing - Part 6: Tests for the validity of the constant failure rate or constantfailure intensity assumptions29P;A4

IEC 60609-1978 水轮机、蓄能泵和涡轮泵气蚀损坏的评定Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines30P;A4

IEC 60609-2-1997水轮机、蓄能泵和涡轮泵气蚀损坏的评定.第2部分:水戽式

水轮机的评定

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2:Evaluation in Pelton turbines31P;A4

IEC 60613-1989 医疗诊断用旋转阳极X射线管的电、热和负载性能Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis29P;A4

IEC 60614-1 AMD 1-1995 电气安装用导管规范.第1部分:一般要求.第1次修改Conduits for electrical installations - Specification - Part 1: General requirements; Amendment 15P;A4

IEC 60614-1-1994 电气安装用导管规范.第1部分:一般要求Conduits for electrical installations; specification; part 1: general requirements47P;A4

IEC 60614-2-1 AMD 1-1993 第1次修改Specification for conduits for electrical installations; part 2: particular specifications for conduits;section 1: metal conduits; amendment 15P;A4

IEC 60614-2-1-1982电气安装用导管规范.第2部分:导管特殊规范.第1节:金属导

管

Specification for conduits for electrical installations. Part 2 : Specification for conduits forelectrical installations. Section one: Metal conduits16P;A4

IEC 60614-2-2 AMD 1-1993 第1次修改Specification for conduits for electrical installations; part 2: particular specifications for conduits;section 2: rigid plain conduits of insulting materials; amendment 14P;A4

IEC 60614-2-2-1980电气设备用导管规范.第2部分:普通刚性绝缘材料导管的特

殊规范

Specification for conduits for electrical installations. Part 2 : Particular specification for rigid plainconduits of insulating materials19P;A4

（149） 351

IEC标准目录


开本页数

IEC 60614-2-3-1990电气安装用导管规范.第2部分:导管特殊规范.第3节:绝缘材

料用软管

Specification for conduits for electrical installations; part 2: particular specifications for conduits;section three: pliable conduits of insulating material25P;A4

IEC 60614-2-4 AMD 1-1993 第1次修改Specification for conduits for electrical installations; part 2: particular specifications for conduits;section 4: pliable self-recovering conduits of insulting materials; amendment 15P;A4

IEC 60614-2-4-1985电气设备用导管规范.第2部分:导管特殊规范.第4节:柔性自

恢复绝缘材料导管

Specification for conduits for electrical installations. Part 2 : Section four: Pliable self-recoveringconduits of insulating materials20P;A4

IEC 60614-2-5-1992 电气安装用导管规范.第2部分:导管特殊规范.第5节:软导管Specification for conduits for electrical installations; part 2: particular specifications for conduits;section 5: flexible conduits32P;A4

IEC 60614-2-6-1992电气安装用导管规范.第2部分:导管特殊规范.第6节:由金属

或复合材料制成的可塑导管

Specification for conduits for electrical installations; part 2: particular specifications for conduits;section 6: pliable conduits of metal or composite materials32P;A4

IEC 60614-2-7-1995电气安装用导管.规范.第2部分:导管的特殊规范.第7节:铝合

金的硬性非丝状导管

Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits -Section 7: Rigid non-threadable conduits of aluminium alloy25P;A4

IEC 60615-1978 微波仪器术语Terminology for microwave apparatus43P;A4

IEC 60617-12-1997 制图用图形符号.第12部分:二进制逻辑元件Graphical symbols for diagrams - Part 12: Binary logic elements246P;A4

IEC 60617-13-1993 制图用图形符号.第13部分:模拟元件Graphical symbols for diagrams; part 13: analogue elements49P;A4

IEC 60617-DB-2001 简图用图形符号 Graphical symbols for diagrams

IEC 60618 AMD 1-1981 感应分压器 Inductive voltage dividers

IEC 60618 AMD 2-1997 感应电压分压器.第2次修订Inductive voltage dividers; Amendment 25P;A4

IEC 60618-1978 感应电压分压器Inductive voltage dividers38P;A4

IEC 60619 AMD 1-1995 电动食品加工器具.测量方法.补充件1Electrically operated food preparation appliances - Measuring methods; Amendment 113P;A4

IEC 60619-1993 食品制备电动器具.性能测量方法Electrically operated food preparation appliances; methods for measuring the performance51P;A4

IEC 60620-1984 单孔、轴套安装、轴操作电子元件的安装尺寸Dimensions for the mounting of single-hole, bush-mounted, spindle-operated electroniccomponents

IEC 60621-1-1987户外恶劣条件下(包括露天矿和采石场)用电气设施.第1部分:范围和定义

Electrical installations for outdoor sites under heavy conditions (including opencast mines andquarries). Part 1 : Scope and definitions23P;A4

（150） 351

IEC标准目录


开本页数

IEC 60621-2-1987户外恶劣条件下(包括露天矿和采石场)用电气设施.第2部分:一般防护要求

Electrical installations for outdoor sites under heavy conditions (including open-cast mines andquarries); part 2: general protection requirements103P;A4

IEC 60621-3 AMD 1-1986 户外恶劣条件下(包括露天矿和采石场)用电气设施.第3部分:设备及附件的一般要求

Electrical installations for outdoor sites under heavy conditions (including opencast mines andquarries). Part 3 : General requirements for equipment and auxiliaries

IEC 60621-3-1979户外恶劣条件下(包括露天矿和采石场)用电气设施.第3部分:设备和辅助设备的一般要求

Electrical installations for outdoor sites under heavy conditions (including opencast mines andquarries). Part 3 : General requirements for equipment and auxiliaries39P;A4

IEC 60621-4 AMD 1-1987 第1次修改Electrical installations for outdoor sites under heavy conditions (including opencast mines andquarries). Part 4 : Requirements for the installation

IEC 60621-4-1981户外恶劣条件下(包括露天矿和采石场)用电气设施.第4部分:安装的要求

Electrical installations for outdoor sites under heavy conditions (including opencast mines andquarries). Part 4 : Requirements for the installation39P;A4

IEC 60621-5-1987户外恶劣条件下(包括露天矿和采石场)用电气设施.第5部分:操作要求

Electrical installations for outdoor sites under heavy conditions (including opencast mines andquarries). Part 5 : Operating requirements23P;A4

IEC 60622-2002含碱性或其它非酸性电解液的蓄电池和蓄电池组.密封镍镉

方形可充电单体电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells29P;A4

IEC 60623-2001含碱性或其他非酸性电解质的二次电池和蓄电池.可再充电

的柱形通气镍镉电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells33P;A4

IEC 60624-1978 脉冲发生器性能的表示法Expression of the performance of pulse generators59P;A4

IEC 60625-1-1993可编程序测量仪的接口系统(字节串行,位并行).第1部分:功能规范、电气规范、机械规范、系统应用和对设计者及用户使用的要求

Programmable measuring instruments; interface system (byte serial, bit parallel); part 1:functional, electrical and mechanical specifications, system applications and requirements for thedesigner and user271P;A4

IEC 60625-2-1993可编程序测量仪的接口系统(字节串行,位并行).第2部分:代码和格式惯例

Programmable measuring instruments; interface system (byte serial, bit parallel); part 2: codes,formats, protocols and common commands563P;A4

IEC 60626-1 AMD 1-1996电气绝缘用复合柔软材料.第1部分:定义和一般要求.补充件

1

Combined flexible materials for electrical insulation - Part 1: Definitions and generalrequirements; Amendment 13P;A4

IEC 60626-1-1995 电气绝缘用复合柔软材料.第1部分:定义和一般要求Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements11P;A4

IEC 60626-2-1995 电气绝缘用复合柔软材料规范.第2部分:试验方法Combined flexible materials for electrical insulation - Part 2: Methods of test25P;A4

（151） 351

IEC标准目录


开本页数

IEC 60626-3 AMD 1-1999 电气绝缘用复合柔软材料.第3部分:专用材料规范.补充件1Combined flexible materials for electrical insulation - Part 3: Specifications for individualmaterials; Amendment 151P;A4

IEC 60626-3 Edition 2.1-2002 电绝缘用复合柔软材料.第3部分:专项材料规范Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials73P;A4

IEC 60626-3-1996 电气绝缘用复合柔软材料.第3部分:专用材料规范Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials49P;A4

IEC 60627-2001 X射线成像诊断设备.通用和乳腺X线照射反散射栅的特性Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographicanti-scatter grids55P;A4

IEC 60628-1985 绝缘液体在电应力和电离作用下的析气Gassing of insulating liquids under electrical stress and ionization34P;A4

IEC 60630 AMD 1-1997 白炽灯用大电灯外形图.修改件1Maximum lamp outlines for incandescent lamps; Amendment 136P;A4

IEC 60630 AMD 2-1998 白炽灯的大灯泡外形图.第2次修订Maximum lamp outlines for incandescent lamps; Amendment 217P;A4

IEC 60630 AMD 3-1999 白炽灯的大灯泡外形图.补充件3Maximum lamp outlines for incandescent lamps; Amendment 39P;A4

IEC 60630 AMD 4-2002 白炽灯的大外形尺寸.修改件4Maximum lamp outlines for incandescent lamps; Amendment 425P;A4

IEC 60630 Edition 2.4-2002 白炽灯的大外形尺寸Maximum lamp outlines for incandescent lamps100P;A4

IEC 60630-1994 白炽灯的大灯泡外形图Maximum lamp outlines for incandescent lamps75P;A4

IEC 60631-1978 电动和电磁制动系统的特性和试验Characteristics and tests for electrodynamic and electromagnetic braking systems19P;A4

IEC 60633-1998 高压直流电传输术语Terminology for high-voltage direct current (HVDC) transmission65P;A4

IEC 60634-1993 灯具耐热试验用热试验源(H.T.S).灯Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires18P;A4

IEC 60635 AMD 1-1997 软磁材料环形带绕磁芯.第1次修订Toroidal strip-wound cores made of magnetically soft material; Amendment 13P;A4

IEC 60635-1978 软磁材料环形带绕磁芯Toroidal strip-wound cores made of magnetically soft material17P;A4

IEC 60636-1979 柔性波导组件的性能Flexible waveguide assembly performance35P;A4

IEC 60639-1979 核反应堆.非安全目的防护系统的使用Nuclear reactors. Use of the protection system for non-safety purposes15P;A4

IEC 60640 AMD 1-1984 计算机辅助测量和控制.串行信息通路接口系统 CAMAC - Serial Highway Interface System

（152） 351

IEC标准目录


开本页数

IEC 60640-1979 CAMAC-串行信息通道接口系统CAMAC - Serial Highway Interface System240P;A4

IEC 60641-1 AMD 1-1993 第1次修改Specification for pressboard and presspaper for electrical purposes; part 1: definitions andgeneral requirements; amendment 13P;A4

IEC 60641-1-1979 电工用压纸板和厚纸板规范.第1部分:定义和一般要求Specification for pressboard and presspaper for electrical purposes. Part 1 : Definitions andgeneral requirements11P;A4

IEC 60641-2 AMD 1-1993 第1次修改Specification for pressboard and presspaper for electrical purposes; part 2: methods of test;amendment 15P;A4

IEC 60641-2-1979 电工用压纸板和厚纸板规范.第2部分:试验方法Specification for pressboard and presspaper for electrical purposes. Part 2 : Methods of test42P;A4

IEC 60641-3-1-1992电工用压纸板和厚纸板规范.第3部分:个别材料规范.第1活页:0.01、B.2.1、B.2.3、B.3.1、B.3.3、B.4.1、B.4.3、B.5.1、B.6.1和B.7.1型压纸板的要求

Specification for pressboard and presspaper for electrical purposes; part 3: specifications forindividual materials; sheet 1: requirements for pressboard, types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3,B.4.1, B.4.3, B.5.1, B.6.1 and B.7.155P;A4

IEC 60641-3-2-1992电工用压纸板和厚纸板规范.第3部分:个别材料规范.第2活页:P.2.1、P.4.1、P.4.2、P.4.3、P.6.1和P.7.1型厚纸板的

要求

Specification for pressboard and presspaper for electrical purposes; part 3: specifications forindividual materials; sheet 2: requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1and P.7.126P;A4

IEC 60642 AMD 1-1992 第1次修改Piezoelectric ceramic resonators and resonator units for frequency control and selection; chapter1: standard values and conditions; chapter 2: measuring and test conditions; amendment 15P;A4

IEC 60642-1979频率控制和选择用压电陶瓷谐振子和谐振器.第1章:标准值

和条件.第2章:测量和试验条件

Piezoelectric ceramic resonators and resonator units for frequency control and selection. ChapterI: Standard values and conditions. Chapter II: Measuring and test conditions49P;A4

IEC 60642-2-1994 压电陶瓷谐振器.第2部分:压电陶瓷谐振器的使用指南Piezoelectric ceramic resonator units; part 2: guide to the use of piezoelectric ceramic resonatorunits

IEC 60642-3-1992 压电陶瓷谐振器.第3部分:标准轮廓Piezoelectric ceramic resonators; part 3: standard outlines10P;A4

IEC 60644-1979 电动机电路用高压熔断体规范Specification for high-voltage fuse-links for motor circuit applications18P;A4

IEC 60645-1-2001 电声学.测听设备.第1部分:纯音测听计Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers69P;A4

IEC 60645-2-1993 测听计.第2部分:语言测听装置Audiometers; part 2: equipment for speech audiometry37P;A4

IEC 60645-3-1994 听力计.第3部分:声学和耳神经学用短持续试验信号Audiometers - Part 3: Auditory test signals of short duration for audiometric and neuro-otologicalpurposes18P;A4

（153） 351

IEC标准目录


开本页数

IEC 60645-4-1994 听力计.第4部分:高频声学设备Audiometers - Part 4: Equipment for extended high-frequency audiometry19P;A4

IEC 60646-1992 坩埚感应炉的试验方法Test methods for crucible induction furnaces25P;A4

IEC 60647-1979 电源用磁性氧化物磁芯(EC磁芯)的尺寸Dimensions for magnetic oxide cores intended for use in power supplies (EC-cores)12P;A4

IEC 60650-1979 模拟计数率表.特性和试验方法Analogue counting ratemeters. Characteristics and test methods77P;A4

IEC 60652-2002 架空线建筑物的负荷试验Loading tests on overhead line structures23P;A4

IEC 60654-1-1993 工业过程测量和控制设备的工作条件.第1部分:气候条件Industrial-process measurement and control equipment; operating conditions; part 1: climaticconditions37P;A4

IEC 60654-2 AMD 1-1992工业过程测量和控制设备的工作条件.第2部分:功率.第1次修改

Operating conditions for industrial-process measurement and control equipment; part 2: power;amendment 13P;A4

IEC 60654-2-1979 工业过程测量和控制设备的工作条件.第2部分:动力Operating conditions for industrial-process measurement and control equipment. Part 2 : Power25P;A4

IEC 60654-3-1983 工业过程测量和控制设备的工作条件.第3部分:机械影响Operating conditions for industrial-process measurement and control equipment. Part 3 :Mechanical influences27P;A4

IEC 60654-4-1987 工业过程测量和控制设备的工作条件.第4部分:腐蚀和侵蚀

影响

Operating conditions for industrial-process measurement and control equipment. Part 4 :Corrosive and erosive influence

IEC 60655-19791英寸标准电容传声器自由场灵敏度级与压力场灵敏度级

的差值

Values for the difference between free-field and pressure sensitivity levels for one-inch standardcondenser microphones15P;A4

IEC 60660-1999绝缘子.标称电压1000V以上至300KV(不含)的系统用有机

材料户内支柱绝缘子的试验

Insulators - Tests on indoor post insulators of organic material for systems with nominal voltagesgreater than 1000 V up to but not including 300 kV51P;A4

IEC 60661 AMD 1-2003 家用电咖啡壶性能的测量方法.修改件1Methods for measuring the performance of electric household coffee makers; Amendment 16P;A4

IEC 60661-1999 家用电咖啡壶性能的测量方法Methods for measuring the performance of electric household coffee makers21P;A4

IEC 60662 AMD 10-1997 高压钠蒸气灯.第10次修订High pressure sodium vapour lamps; Amendment 1013P;A4

IEC 60662 AMD 2-1987 高压钠蒸气灯.第2次修改 High pressure sodium vapour lamps

IEC 60662 AMD 3-1990 第3次修改High-pressure sodium vapour lamps; amendment 3 to IEC 662:1980112P;A4

IEC 60662 AMD 4-1992 第4次修改 High-pressure sodium vapour lamps; amendment 4

（154） 351

IEC标准目录


开本页数

IEC 60662 AMD 5-1993 第5次修改High-pressure sodium vapour lamps; amendment 556P;A4

IEC 60662 AMD 6-1994 第6次修改High-pressure sodium vapour lamps; Amendment 627P;A4

IEC 60662 AMD 7-1995 高压钠蒸气灯.补充件7High-pressure sodium vapour lamps; Amendment 778P;A4

IEC 60662 AMD 8-1995 高压钠蒸汽灯.补充件8High-pressure sodium vapour lamps; Amendment 85P;A4

IEC 60662 AMD 9-1997 高压钠蒸气灯.修改件9High-pressure sodium vapour lamps; Amendment 947P;A4

IEC 60662-1980 高压钠蒸气灯High pressure sodium vapour lamps42P;A4

IEC 60663-1980 单边带电力线载波系统的设计Planning of (single-sideband) power line carrier systems89P;A4

IEC 60664-1 AMD 1-2000低压系统内设备的绝缘配合.第1部分:原则、要求和试验.修改件1

Insulation coordination for equipment within low-voltage systems - Part 1: Principles,requirements and tests; Amendment 111P;A4

IEC 60664-1 AMD 2-2002低压系统内设备的绝缘配合.第1部分:原则、要求和试验.修改件2

Insulation coordination for equipment within low-voltage systems - Part 1: Principles,requirements and tests; Amendment 241P;A4

IEC 60664-1 Edition 1.1-2000 低压系统内设备的绝缘配合.第1部分:原则、要求和试验.Insulation coordination for equipment within low-voltage systems - Part 1: Principles,requirements and tests131P;A4

IEC 60664-1 Edition 1.2-2002 低压系统内设备的绝缘配合.第1部分:原则、要求和试验Insulation coordination for equipment within low-voltage systems - Part 1: Principles,requirements and tests133P;A4

IEC 60664-3-2003低压系统内设备的绝缘配合.第3部分:防污染用铸封或压模

涂层的使用

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coatings, pottingor moulding for protection against pollution56P;A4

IEC 60665-1980 家用和类似用途交流排气扇和调速器A.C. electric ventilating fans and regulators for household and similar purposes53P;A4

IEC 60666-1979 绝缘油中规定的抗氧化添加剂的检验和测定Detection and determination of specified anti-oxidant additices in insulating oils24P;A4

IEC 60667-1-1980 电工用硫化纤维制品规范.第1部分:定义和一般要求Specification for vulcanized fibre for electrical purposes. Part 1 : Definitions and generalrequirement

IEC 60667-2 AMD 1-1986 电工用硫化纤维制品规范.第2部分:试验方法 Specification for vulcanized fibre for electrical purposes. Part 2 : Methods of test

IEC 60667-2-1982 电工用硫化纤维制品规范.第2部分:试验方法Specification for vulcanized fibre for electrical purposes. Part 2 : Methods of test24P;A4

（155） 351

IEC标准目录


开本页数

IEC 60667-3-1-1986电工用硫化纤维制品规范.第3部分:单项材料规范.第1活页:扁片材

Specification for vulcanized fibre for electrical purposes. Part 3 : Specifications for individualmaterials. Sheet one: Flat sheets11P;A4

IEC 60669-1 AMD 1-1999家用和类似的固定电气设施用开关.第1部分:一般要求.修改

件1

Switches for household and similar fixed-electrical installations - Part 1: General requirements;Amendment 127P;A4

IEC 60669-1 Edition 3.1-2000 家用和类似固定电气安装开关.第1部分:一般要求Switches for household and similar fixed-electrical installations - Part 1: General requirements187P;A4

IEC 60669-1-1998 家用和类似用途固定电气设备开关.第1部分:总要求Switches for household and similar fixed-electrical installations - Part 1: General requirements181P;A4

IEC 60669-2-1-2002家用和类似的固定电气设施用开关.第2-1部分:特殊要求.电子开关

Switches for household and similar fixed electrical installations - Part 2-1: Particularrequirements; Electronic switches85P;A4

IEC 60669-2-2 AMD 1-1997家用和类似固定电气装置用开关.第2部分第2节:电磁遥控

开关(R.C.S.)的特殊要求.第1次修改

Switches for household and similar fixed electrical installations - Part 2: Particular requirements -Section 2: Electromagnetic remote-control switches (RCS); Amendment 19P;A4

IEC 60669-2-2 Edition 2.1-2002家用和类似固定电气装置用开关.第2-2部分:遥控开关

(RCS)的特殊要求

Switches for household and similar fixed electrical installations - Part 2: Particular requirements;Section 2: Remote-control switches (RCS)27P;A4

IEC 60669-2-2-1996家用和类似的固定电气设施用开关.第2-2部分:电磁遥控开

关(RCS)的特殊要求

Switches for household and similar fixed electrical installations - Part 2: Particular requirements -Section 2: Electromagnetic remote-control switches (RCS)25P;A4

IEC 60669-2-3-1997家用和类似固定电气装置用开关.第2-3部分:对延时开关

(TDS)的特殊要求

Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements- Time-delay switches (TDS)25P;A4

IEC 60670-1-2002 家用和类似用途固定电气设施附件外壳.第1部分:一般要求Boxes and enclosures for electrical accessories for household and similar fixed electricalinstallations - Part 1: General requirements113P;A4

IEC 60671-1980 核反应堆防护系统的定期试验和监视Periodic tests and monitoring of the protection system of nuclear reactors33P;A4

IEC 60672-1-1995 陶瓷和玻璃绝缘材料.第1部分:定义和分类Ceramic and glass insulating materials - Part 1: Definitions and classification29P;A4

IEC 60672-2-1999 陶瓷和玻璃绝缘材料.第2部分:试验方法Ceramic and glass insulating materials - Part 2: Methods of test87P;A4

IEC 60672-3-1997 陶瓷和玻璃绝缘材料.第3部分:单项材料规范Ceramic and glass-insulating materials - Part 3: Specifications for individual materials25P;A4

IEC 60673-1980 低频微型设备用氟化多聚碳类绝缘的实心或绞合导体单芯电线

Low-frequency miniature equipment wires with solid or stranded conductor, fluorinatedpolyhydrocarbon type insulation, single35P;A4

（156） 351

IEC标准目录


开本页数

IEC 60674-1-1980 电工用塑料薄膜规范.第1部分:定义和一般要求Specifications for plastic films for electrical purposes. Part 1 : Definitions and generalrequirements

IEC 60674-2 AMD 1-2001 电工用塑料薄膜规范.第2部分:试验方法.修改件1Specification for plastic films for electrical purposes - Part 2: Methods of test; Amendment 113P;A4

IEC 60674-2-1988 电工用塑料薄膜规范.第2部分:试验方法 Specification for plastic films for electrical purposes. Part 2: Methods of test

IEC 60674-3-1-1998电工用塑料薄膜.第3部分:专用材料规范.第1活页:电容器用

双向取向聚丙烯薄膜

Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1:Biaxially oriented polypropylene (PP) film for capacitors21P;A4

IEC 60674-3-2-1992电工用塑料薄膜规范.第3部分:各别材料规范.第2活页:电绝

缘用平衡双轴取向聚对苯二甲酸乙二醇酯薄膜要求

Specification for plastic films for electrical purposes; part 3: specifications for individual materials;sheet 2: requirements for balanced biaxially oriented polyethylene terephthalate (PET) films usedfor electrical insulation21P;A4

IEC 60674-3-3-1992电工用塑料薄膜规范.第3部分:各别材料规范.第3活页:电绝

缘用聚碳酸酯薄膜要求

Specification for plastic films for electrical purposes; part 3: specifications for individual materials;sheet 3: requirements for polycarbonate (PC) films used for electrical insulation21P;A4

IEC 60674-3-4 to 6-1993电工用塑料薄膜规范.第3部分:各别材料规范.第4-6活页:电绝缘用聚酰亚胺薄膜要求

Specification for plastic films for electrical purposes; part 3: specifications for individual materials;sheets 4 to 6: requirements for polyimide films used for electrical insulation29P;A4

IEC 60674-3-7-1992电工用塑料薄膜规范.第3部分:各别材料规范.第7活页:氟乙

烯丙烯薄膜要求

Specification for plastic films for electrical purposes; part 3: specifications for individual materials;sheet 7: requirements for fluoroethylene-propylene (FEP) films used for electrical insulation17P;A4

IEC 60675 Edition 2.1-1998 家用电直接式房间加热器.性能测量方法Household electric direct-acting room heaters - Methods for measuring performance43P;A4

IEC 60675-1998 家用直热房间电暖炉.性能的测量方法Household electric direct-acting room heaters - Methods for measuring performance43P;A4

IEC 60676-2002 工业电加热设备.直接电弧炉的试验方法Industrial electroheating equipment - Test methods for direct arc furnaces39P;A4

IEC 60677-1980 CAMAC系统中的字组转移Block transfers in CAMAC system39P;A4

IEC 60678-1980 IEC标准中使用的CAMAC术语的定义Definitions of CAMAC terms used in IEC publications33P;A4

IEC 60679-1 AMD 1-2002 质量评定的石英晶体振荡器.第1部分:总规范.修改件1Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification;Amendment 1

IEC 60679-1-1997 已质量评定的石英晶体受控振荡器.第1部分:总规范Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification159P;A4

IEC 60679-2-1981 石英晶体受控振荡器.第2部分:石英晶体受控振荡器使用导

则

Quartz crystal controlled oscillators. Part 2 : Guide to the use of quartz crystal controlledoscillators

IEC 60679-3-2001经质量评定的石英晶体振荡器.第3部分:标准外形和引线连

接

Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and leadconnections69P;A4

（157） 351

IEC标准目录


开本页数

IEC 60679-4-1-1998已质量评定的石英晶体受控振荡器.第4-1部分:空白详细规

范.能力鉴定

Quartz crystal controlled oscillators of assessed quality - Part 4-1: Blank detail specification -Capability approval23P;A4

IEC 60679-4-1997 石英晶体受控振荡器.第4部分:分规范.能力鉴定Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional specification -Capability approval59P;A4

IEC 60679-5-1-1998已评定质量的石英晶体受控振荡器.第5-1部分:空白详细规

范.质量验证

Quartz crystal controlled oscillators of assessed quality - Part 5-1: Blank detail specification -Qualification approval19P;A4

IEC 60679-5-1998已评定质量的石英晶体受控振荡器.第5部分:分规范.质量验

证

Quartz crystal controlled oscillators of assessed quality - Part 5: Sectional specification -Qualification approval31P;A4

IEC 60680-1980 电热用等离子设备的试验方法Test methods of plasma equipment for electroheat applications37P;A4

IEC 60681-1-1980 规定用途的小功率电动机的尺寸.第1部分:燃油器电动机Dimensions of small power motors for definite purpose application. Part 1 : Oil burner motors18P;A4

IEC 60682 AMD 1-1987 测量石英卤钨灯夹封部温度的标准方法 Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps

IEC 60682 AMD 2-1997 测量石英玻璃夹封部温度的方法.修订件2Method of measuring the pinch temperature of quartz glass lamps; Amendment 25P;A4

IEC 60682-1980 测量石英卤钨灯夹封部温度的标准方法Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps18P;A4

IEC 60683-1980 埋弧炉的试验方法Test methods for submerged arc furnaces22P;A4

IEC 60684-1-1980 绝缘软套管规范.第1部分:定义和一般要求Specification for flexible insulating sleeving. Part 1 : Definitions and general requirements9P;A4

IEC 60684-2-1997 绝缘软套管.第2部分:试验方法Flexible insulating sleeving - Part 2: Methods of test141P;A4

IEC 60684-3-100 to 105-2001绝缘软套管.第3部分:各种型号套管的规范.第100至105活页:挤压聚氯乙烯(PVC)套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 100 to105: Extruded PVC sleeving25P;A4

IEC 60684-3-116 to 118-1991绝缘软套管规范.第3部分:各种型号套管的规范要求.第116至118活页:通用挤压氯丁绝缘软套管

Specification for flexible insulating sleeving; part 3: specification requirements for individual typesof sleeving; sheets 116 to 118: extruded polychloroprene, general purpose11P;A4

IEC 60684-3-121 to 124-2001绝缘软套管.第3部分:各种型号套管的规范要求.第121和124活页:挤制硅橡胶套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 121 to124: Extruded silicone sleeving15P;A4

IEC 60684-3-136-1997绝缘软套管.第3部分:各种型号套管的规范.第136活页:挤压

氟硅酮套管.一般用途

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136:Extruded fluorosilicone sleeving - General purpose13P;A4

（158） 351

IEC标准目录


开本页数

IEC 60684-3-145 to 147-2001绝缘软套管.第3部分:各种型号套管的规范.第145和147活页:挤压聚四氟乙烯套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 145 to147: Extruded PTFE sleeving15P;A4

IEC 60684-3-151-1998柔软绝缘套管.第3部分:套管单独类型规范.第151页:挤压成

型的PVC/晴橡胶,一般目的

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151:Extruded PVC/nitrile rubber - General purpose13P;A4

IEC 60684-3-211-2002绝缘软套管.第3部分:各种型号套管的规范.表211:半硬式热

缩聚烯烃套管,收缩率2:1

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 211:Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:115P;A4

IEC 60684-3-212-1998绝缘软套管.第3部分:各种型号套管的规范.第212活页:收缩

比为2:1的阻燃聚烯烃热缩套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212:Heat-shrinkable polyolefin sleeving, flame retarted, shrink ratio 2:1

IEC 60684-3-213-1998绝缘软套管.第3部分:各种型号套管的规范.第213活页:热缩

聚烯烃套管.非火焰回缩,热缩比率2:1

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 213:Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:115P;A4

IEC 60684-3-214-2001绝缘软套管.第3部分:各种型号套管的规范.第214活页:不耐

火的热缩聚烯烃套管.热缩比率3:1.厚和中壁

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 214:Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1; Thick and medium wall19P;A4

IEC 60684-3-216-2001绝缘软套管.第3部分:各种型号套管的规范.第216活页:热缩

、阻燃的防火套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216:Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving21P;A4

IEC 60684-3-217-1998柔软绝缘套管.第3部分:套管单独类型规范.第217页:热缩聚

烯烃套管.火焰滞后.收缩比3:1Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217:Heat-shrinkable polyolefin sleeving, flame retarted, shrink ratio 3:1

IEC 60684-3-218-1998柔软绝缘套管.第3部分:套管单独类型规范.第218页:热缩聚

烯烃套管.无火焰滞后.收缩比3:1

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218:Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:117P;A4

IEC 60684-3-228-1998柔软绝缘套管.第3部分:套管单独类型规范.第228页:热缩半

刚性聚偏二氟乙烯套管.火焰滞后.抗液流,收缩比2:1

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228:Heat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarted, fluid resistant, shrink

IEC 60684-3-229-2003绝缘软套管.第3部分:各种型号套管的规范要求.第229活页:热缩半挠性阻燃抗液流收缩比2:1的聚偏二氟乙烯套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 229:Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant,shrink ratio 2:1

IEC 60684-3-233-1998柔软绝缘套管.第3部分:套管单独类型规范.第233页:热缩氟

化物弹性套管.火焰滞后.抗液流,收缩比2:1

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233:Heat-shrinkable fluorelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:121P;A4

IEC 60684-3-240 to 243-2002绝缘软管.第3部分:各种型号软管规范.第240至243篇:热收

缩聚四氟乙烯(PTFE)绝缘软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to243: Heat-shrinkable PTFE sleeving17P;A4

IEC 60684-3-246-2001绝缘软管.第3部分:各种型号软管规范.第246篇:双壁不阻燃

聚烯烃热收缩软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246:Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded17P;A4

（159） 351

IEC标准目录


开本页数

IEC 60684-3-271-1998柔软绝缘套管.第3部分:套管单独类型规范.第271页:热缩弹

性套管, 火焰滞后.抗液流,收缩比2:1

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271:Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:121P;A4

IEC 60684-3-272-1998柔软绝缘套管.第3部分:套管单独类型规范.第271页:热缩弹

性套管, 火焰滞后.抗液流,收缩比2:1,簿壁

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 272:Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall21P;A4

IEC 60684-3-300-2002绝缘软管.第3部分:各种型号软管规范.第300篇:无涂层的玻

璃纤维编织软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300:Glass textile fibre sleeving, braided, uncoated11P;A4

IEC 60684-3-320-2002绝缘软管.第3部分:各种型号软管规范.第320篇:轻度浸渍的

聚对苯二甲酸乙二醇酯编织物

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 320:Polyethylene terephthalate textile sleeving, lightly impregnated11P;A4

IEC 60684-3-340 to 342-1992绝缘软套管规范.第3部分:各种型号套管的规范要求.第340至342活页:可扩张的编织聚脂纤维软管

Specification for flexible insulating sleeving; part 3: specification requirements for individual typesof sleeving; sheets 340 to 342: expandable braided polyethylene terephthalate textile sleeving15P;A4

IEC 60684-3-343 to 345-2002绝缘软管.第3部分:各种型号软管规范.第343至345篇:无涂

层可扩张编织的乙烯三氟氯乙烯纤维软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated15P;A4

IEC 60684-3-400 to 402-2002绝缘软管.第3部分:各种型号软管规范.第400至402篇:硅弹

性玻璃纤维软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to402: Glass textile sleeving with silicone elastomer coating17P;A4

IEC 60684-3-403 to 405-2002绝缘软套管.第3部分:各种型号套管的规范.表403至405:有丙烯酸基覆层的玻璃丝纺织套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to405: Glass textile sleeving with acrylic based coating17P;A4

IEC 60684-3-406 to 408-1988绝缘软套管规范.第3部分:各种型号套管的规范要求,第406至408活页:有PVC为基底涂覆层的玻璃丝织套管

Specification for flexible insulating sleeving; part 3: specification requirements for individual typesof sleeving; sheets 406 to 408; glass textile sleeving with PVC based coating

IEC 60684-3-409-1999绝缘软套管规范.第3部分:套管专型规范.第409章:带聚胺酯

(PUR)基涂覆层的玻璃织物套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409:Glass textile sleeving with polyurethane (PUR)-based coating17P;A4

IEC 60684-3-420 to 422-2002绝缘软套管.第3部分:各种型号套管的规范.表420至第422:有丙烯酸底漆的聚对苯二甲酸乙二醇酯编织软套管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to422: Polyethylene terephthalate textile sleeving with acrylic based coating15P;A4

IEC 60686-1980 交流输出稳压电源Stabilized power supplies, a.c. output65P;A4

IEC 60688 AMD 1-1997交流电量转换成模拟信号或数字信号用的电气测量变换器.修改件1

Electrical measuring transducers for converting a.c. electrical quantities to analogue or digitalsignals; Amendment 15P;A4

IEC 60688 AMD 2-2001交流电量转换成模拟信号或数字信号用的电气测量变换器.修改件2

Electrical measuring transducers for converting a.c. electrical quantities to analogue or digitalsignals; Amendment 29P;A4

（160） 351

IEC标准目录


开本页数

IEC 60688 Edition 2.2-2002 交流电量转换成模拟信号或数字信号的电测量变换器Electrical measuring transducers for converting a.c. electrical quantities to analogue or digitalsignals

IEC 60688-1992 交流电量转换成模拟信号或数字信号用的电气测量变换器Electrical measuring transducers for converting a.c. electrical quantities to analogue or digitalsignals

IEC 60689-1980 手表用32KHz石英谐振器的测量和试验方法及标准值Measurements and test methods for 32 kHz quartz crystal units for wrist watches and standardvalues

IEC 60691-2002 热熔断体.要求和应用指南Thermal-links - Requirements and application guide77P;A4

IEC 60692-1999 核检测仪表.利用电离辐射的密度计.定义和试验方法Nuclear instrumentation - Density gauges utilizing ionizing radiation - Definitions and testmethods

IEC 60694 AMD 1-2000 高压开关设备和控制设备标准用一般规范.修改件1 Common specifications for high-voltage switchgear and controlgear standards; Amendment 1

IEC 60694 AMD 2-2001 高压开关和控制设备标准的一般规范.修改件2Common specifications for high-voltage switchgear and controlgear standards; Amendment 219P;A4

IEC 60694 Edition 2.2-2002 高压开关设备和控制设备标准的通用规范Common specifications for high-voltage switchgear and controlgear standards225P;A4

IEC 60694-1996 高压开关设备和控制设备标准的通用条款Common specification high-voltage switchgear and controlgear standards179P;A4

IEC 60695-10-2 AMD 1-2001着火危险试验.第10-2部分:着火过程中电工产品受异常热

而产生的低影响的导则和试验方法.使用球压试验对由非

金属材料制成的产品的耐热性的试验方法.修改件1

Fire hazard testing - Part 10-2: Guidance and test methods for the minimization of the effects ofabnormal heat on electrotechnical products involved in fires; Method for testing products madefrom non-metallic materials for resistance to heat using the ball pressure test; Amendment 19P;A4

IEC 60695-10-2 Edition 1.1-2001

着火危险试验.第10-2部分:着火过程中电工产品受异常热

而产生的低影响的导则和试验方法.使用球压试验对由非

金属材料制成的产品的耐热性的试验方法

Fire hazard testing - Part 10-2: Guidance and test methods for the minimization of the effects ofabnormal heat on electrotechnical products involved in fires; Method for testing products madefrom non-metallic materials for resistance to heat using the ball pressure test23P;A4

IEC 60695-10-2-1995着火危险试验.第10部分:将火中电工产品不正常热的效应

减至小的指南和试验方法.第2节:使用球压试验的非金属

材料制成的产品的耐热性试验方法

Fire hazard testing - Part 10: Guidance and test methods for the minimization of the effects ofabnormal heat on electrotechnical products involved in fires - Section 2: Method for testingproducts made from non-metallic materials for resistance to heat using the ball pressure test11P;A4

IEC 60695-10-3-2002 着火危险试验.第10-3部分:不正常热.模型应力释放扭变试

验

Fire hazard testing - Part 10-3: Abnormal heat; Mould stress relief distortion test11P;A4

IEC 60695-11-10-1999 着火危险试验.第11-10部分:50W水平和垂直火焰的试验方

法

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods45P;A4

IEC 60695-1-1-1999着火危险试验.第1-1部分:电工产品着火危险评定指南.通用

指南

Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products- General guidelines73P;A4

IEC 60695-11-20-1999 着火危险试验.第11-20部分:500W火焰的试验方法Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods37P;A4

（161） 351

IEC标准目录


开本页数

IEC 60695-1-2-1982着火危险试验.第1部分:电工产品着火危险评定技术要求和

试验规范制订指南.第2节:电子元件的指南

Fire hazard testing. Part 1 : Guidance for the preparation of requirements and test specificationsfor assessing fire hazard of electrotechnical products. Guidance for electronic components13P;A4

IEC 60695-1-30-2002着火危险试验.第1-30部分:电工产品着火危险评定指南.预选规程使用指南

Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnicalproducts; Use of preselection testing procedures41P;A4

IEC 60695-2-10-2000着火危险试验.第2-10部分:灼热金属线/热线的试验方法.灼热金属线仪器和通用试验方法

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods; Glow-wire apparatus andcommon test procedure29P;A4

IEC 60695-2-11-2000着火危险试验.第2-11部分:灼热金属线/热线的试验方法.终产品的灼热金属线可燃性试验方法

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods; Glow-wire flammability testmethod for end-products17P;A4

IEC 60695-2-12-2000着火危险试验.第2-12部分:灼热金属线/热线的试验方法.材料的灼热金属线可燃性试验方法

Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods; Glow-wire flammability testmethod for materials13P;A4

IEC 60695-2-13-2000着火危险试验.第2-13部分:灼热金属线/热线的试验方法.材料的灼热金属线着火性试验方法

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods; Glow-wire ignitability testmethod for materials13P;A4

IEC 60695-2-2 AMD 1-1994 着火危险试验.第2部分:试验方法.第2节:针焰试验Fire hazard testing; part 2: test methods; section 2: needle-flame test10P;A4

IEC 60695-2-20-1995着火危险试验.第2部分:灼烧/发热导线基础试验方法.20节:热线卷点火试验

Fire hazard testing - Part 2: Glowing/hot wire based test methods - Section 20: Hot-wire coilignitability test on materials14P;A4

IEC 60695-2-2-1991 着火危险试验.第2部分:试验方法.第2节:针焰试验Fire hazard testing; part 2: test method; section 2: needle-flame test18P;A4

IEC 60695-2-3-1984 着火危险试验.第2部分:试验方法.第3节:用发热器作不良接

触试验

Fire hazard testing. Part 2 : Test methods. Bad-connection test with heaters29P;A4

IEC 60695-2-4/0-1991着火危险试验.第2部分:试验方法.第4节/第0页:扩散型和预

混型燃烧试验方法

Fire hazard testing; part 2: test methods; section 4/sheet 0: diffusion type and premixed typeflame test methods28P;A4

IEC 60695-2-4/1 AMD 1-1994着火危险试验.第2部分:试验方法.第4节/第1页:1KW额定预

混型燃烧试验和导则.第1次修改

Fire hazard testing - Part 2: Test methods - Section 4/sheet 1: 1 kW nominal pre-mixed testflame and guidance; Amendment 13P;A4

IEC 60695-2-4/1-1991着火危险试验.第2部分:试验方法.第4节/第1页:1KW额定预

混型燃烧试验和导则

Fire hazard testing; part 2: test methods; section 4/sheet 1: 1 kW nominal pre-mixed test flameand guidance24P;A4

IEC 60695-3-1-1982着火危险试验.第3部分:着火危险评定规程举例和试验结果

解释.第1节:燃烧特性及其测定的试验方法综述

Fire hazard testing. Part 3 : Examples of fire hazard assessment procedures and interpretation ofresults. Combustion characteristics and survey of test methods for their determination17P;A4

（162） 351

IEC标准目录


开本页数

IEC 60695-4 AMD 1-1995 着火危险试验.第4部分:着火试验术语.补充件1Fire hazard testing - Part 4: Terminology concerning fire tests; Amendment 15P;A4

IEC 60695-4 AMD 2-2001 着火危险试验.第4部分:着火试验术语.修改件2Fire hazard testing - Part 4: Terminology concerning fire tests; Amendment 27P;A4

IEC 60695-4 Edition 2.2-2001 着火危险试验.第4部分:着火试验有关术语Fire hazard testing - Part 4: Terminology concerning fire tests45P;A4

IEC 60695-4-1993 着火危险试验.第4部分:着火试验术语Fire hazard testing; part 4: terminology concerning fire test39P;A4

IEC 60695-5-1-2002 着火危险试验.第5-1部分:燃烧废气引起的腐蚀损害效果.一般指南

Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent; General guidance35P;A4

IEC 60695-6-1-2001 着火危险试验.第6-1部分:烟蔽光性.一般指南Fire hazard testing - Part 6-1: Smoke opacity; General guidance59P;A4

IEC 60695-6-31-1999 着火危险试验.第6-31部分:烟雾模糊.小范围静态试验.材料Fire hazard testing - Part 6-31: Smoke obscuration - Small-scale static test - Materials33P;A4

IEC 60695-7-1-1993火灾危险试验.第7部分:包括电器产品的着火过程中小毒

性试验导则.第1节:总则

Fire hazard testing; part 7: guidance on the minimization of toxic hazards due to fires involvingelectrotechnical products; section 1: general19P;A4

IEC 60695-8-1-2001 着火危险试验.第8-1部分:热的释放.通用指南Fire hazard testing - Part 8-1: Heat release; General guidance25P;A4

IEC 60695-9-1-1998 着火危险试验.第9-1部分:火焰的表面扩展.通用导则Fire hazard testing - Part 9-1: Surface spread of flame - General guidance17P;A4

IEC 60700-1 AMD 1-2003高压直流(HVDC)电力传输用可控硅阀门.第1部分:电气试

验.修改件1

Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electricaltesting; Amendment 120P;A4

IEC 60700-1-1998 高压直流(HVDC)传输用可控硅阀门.第1部分:电气试验Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electricaltesting

IEC 60701-1981 磁性氧化物或铁粉制轴向引线磁芯Axial lead cores made of magnetic oxides or iron powder21P;A4

IEC 60702-1-2002额定电压不超过750V的矿物绝缘电缆及其终端.第1部分:电缆

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1:Cables45P;A4

IEC 60702-2-2002额定电压不超过750V的矿物绝缘电缆及其终端.第2部分:终端

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2:Terminations17P;A4

IEC 60703-1981 带有电子枪的电热装置的试验方法Test methods for electroheating installations with electron guns15P;A4

IEC 60704-1-1997家用及类似用途电器.空气噪声测量的试验规程.第1部分:一般要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 1: General requirements57P;A4

（163） 351

IEC标准目录


开本页数

IEC 60704-2-11-1998家用和类似用途电器.空气传播噪声测量的试验规程.第2-11部分:电控食品加工器具的特殊要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 2-11: Particular requirements for electrically-operated food preparationappliances

IEC 60704-2-1-2000家用和类似用途电气设备.测定空气噪声的试验规程.第2-1部分:真空吸尘器的特殊要求

Household and similar electrical applicances - Test code for the determination of airborneacoustical noise - Part 2-1: Particular requirements for vacuum cleaners27P;A4

IEC 60704-2-13-2000家用和类似用途电器.测定空中传播噪声的试验规程.第2-13部分:排油烟机的特殊要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 2-13: Particular requirements for range hoods29P;A4

IEC 60704-2-2-1985测定家用和类似电器发出的空气传播的噪声的试验规程.第2部分:对送风式对流电暖炉的特殊要求

Test code for the determination of airborne acoustical noise emitted by household and similarelectrical appliances. Part 2 : Particular requirements for forced draught convection heaters19P;A4

IEC 60704-2-3-2001家用和类似用途电器.测定空气传播噪声的试验规范.第2-3部分:洗碗机的特殊要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 2-3: Particular requirements for dishwashers14P;A4

IEC 60704-2-4-2001家用和类似用途电器.测定空气传播的噪声的试验规程.第2-4部分:洗衣机和离心式脱水机的特殊要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors27P;A4

IEC 60704-2-5-1989测定家用和类似电器发出的空气传播的噪声的试验规程.第2部分:贮存型房间加热器的特殊要求

Test code for the determination of airborne acoustical noise emitted by household and similarelectrical appliances; part 2: particular requirements for room heaters of the storage type15P;A4

IEC 60704-2-6-2003测定家用和类似用途电器发出的空中传播噪声的试验规范.第2-6部分:滚筒式干衣机的特殊要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 2-6: Particular requirements for tumble dryers20P;A4

IEC 60704-2-7-1997家用及类似用途电气装置.空气噪声测定的试验规程.第2部分:风扇的特殊要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 2: Particular requirements for fans21P;A4

IEC 60704-2-8-1997家用及类似用途电气装置.空气噪声测定的试验规程.第2部分:电动剃须刀的特殊要求

Household and similar electrical appliances - Test code for the determination of airborneacoustical noise - Part 2: Particular requirements for electric shavers19P;A4

IEC 60704-3-1992测定家用和类似电器发出的空气传播的噪声的试验规程.第3部分:测定和检验标称噪音污染值的程序

Test code for the determination of airborne acoustical noise emitted by household and similarelectrical appliances; part 3: procedure for determining and verifying declared noise emissionvalues

IEC 60705-1999 家用微波炉.性能的测定方法Household microwave ovens - Methods for measuring performance63P;A4

IEC 60706-1-1982设备维修性导则.第1部分:第1节、第2节、第3节:引言、要

求、维修性大纲

Guide on maintainability of equipment. Part 1 : Sections One, Two and Three. Introduction,requirements and maintainability programs39P;A4

（164） 351

IEC标准目录


开本页数

IEC 60706-2-1990 设备维修性导则.第2部分第5节:设计阶段的可维护性研究Guide on maintainability of equipment; part 2: section five; maintainability studies during thedesign phase39P;A4

IEC 60706-3-1987 设备维修性导则.第3部分:第6节、第7节:数据的验证和采集

、分析和表述

Guide on maintainability of equipment. Part 3: Sections Six and Seven - Verification andcollection, analysis and presentation of data.

IEC 60706-4-1992 设备维修性导则.第4部分:第8节:维护和维护支援计划Guide on maintainability of equipment; part 4, section 8: maintenance and maintenance supportplanning63P;A4

IEC 60706-5-1994 设备维修性导则.第5部分:第4节:诊断试验Guide on maintainability of equipment - Part 5, Section 4: Diagnostic testing53P;A4

IEC 60706-6-1994 设备维修性导则.第5部分:第9节:维护评定中的统计方法Guide on maintainability of equipment - Part 6; section 9: Statistical methods in maintainabilityevaluation41P;A4

IEC 60707-1999 当暴露于火源时固体非金属材料的可燃性.试验方法目录Flammability of solid non-metallic materials when exposed to flame sources - List of test methods15P;A4

IEC 60708-1 AMD 3-1988聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第1部分:一般设计细节与要求.IEC 60708-4-81的包括修改件1,2在内

的修改件3

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath; part 1:general design details and requirements; amendment No. 3 incorporating amendment No. 1 andamendment No. 2 to publication 60708-1:198119P;A4

IEC 60708-1-1981聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第1部分:一般设计细节与要求

Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath. Part 1 :General design details and requirements45P;A4

IEC 60708-2 AMD 1-1983聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第2部分:组合式、有填充、固体或泡沫绝缘的聚乙烯防潮护套铜导体电缆

Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath. Part 2 :Unittype, filled, moisture barrier polyethylene sheathed cables with copper conductors and solid orcellular insulation

IEC 60708-2-1981聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第2部分:组合式、有填充、固体或泡沫绝缘的聚乙烯防潮护套铜导体电缆

Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath. Part 2 :Unittype, filled, moisture barrier polyethylene sheathed cables with copper conductors and solid orcellular insulation9P;A4

IEC 60708-3 AMD 1-1983聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第3部分:组合式、无填充、固体或泡沫绝缘的聚乙烯防潮护套铜导体电缆

Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath. Part 3 :Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors andsolid or cellular insulation

IEC 60708-3-1981聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第3部分:组合式、无填充、固体或泡沫绝缘的聚乙烯防潮护套铜导体电缆

Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath. Part 3 :Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors andsolid or cellular insulation9P;A4

IEC 60708-4 AMD 1-1983聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第4部分:带聚乙烯防潮护套的、实心绝缘和整体悬挂绞线的组合式无填充铜导体电缆

Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath. Part 4 :Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors, solidinsulation and integral suspension strand

（165） 351

IEC标准目录


开本页数

IEC 60708-4-1981聚烯烃绝缘和带聚烯烃防潮层护套的低频电缆.第4部分:带层聚乙烯防潮护套的、实心绝缘和整体悬挂绞线的组合式无填充铜导体电缆

Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheath. Part 4 :Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors, solidinsulation and integral suspension strand9P;A4

IEC 60709-1981 反应堆防护系统内部的隔离Separation within the reactor protection systems15P;A4

IEC 60710-1981 测量和监视空气中氚的辐射防护设备Radiation protection equipment for the measuring and monitoring of airborne tritium64P;A4

IEC 60711-1981 用耳塞耦合到人耳的耳机测量用塞耳模拟器Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts24P;A4

IEC 60712 AMD 1-1993 第1次修改Helical-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format;amendment 127P;A4

IEC 60712-1993 U型格式19mm(3/4in)螺旋扫描盒式录像磁带装置Helical-scan video-tape cassette system using 19 mm (3/4 in) magnetic tape, known as U-format83P;A4

IEC 60713-1981 CAMAC的子程序Subroutines for CAMAC57P;A4

IEC 60714-1981 频谱分析仪性能的表示法Expression of the properties of spectrum analyzers51P;A4

IEC 60715 AMD 1-1995低压开关设备和控制设备的尺寸.开关设备和控制设备中电

气器件的机械支承用轨道上的标准化安装.修改件1

Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails formechanical support of electrical devices in switchgear and controlgear installations; Amendment1

IEC 60715-1981低压开关设备和控制设备的尺寸.开关设备和控制设备中电

气器件的机械支承用轨道上的标准化安装

Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails formechanical support of electrical devices in switchgear and controlgear installations41P;A4

IEC 60716-1981 信号发生器性能的表示法Expression of the properties of signal generators95P;A4

IEC 60717-1981 具有单向引出终端的电容器和电阻器所需空间的确定方法

Method for the determination of the space required by capacitors and resistors with unidirectionalterminations9P;A4

IEC 60719-1992额定电压450/750V(含)以下的圆铜导体电缆平均外径尺寸

上限和下限的计算

Calculation of the lower and upper limits for the average outer dimensions of cables with circularcopper conductors and of rated voltages up to and including 450/750 V13P;A4

IEC 60720-1981 线路支柱绝缘子的特性Characteristics of line post insulators15P;A4

IEC 60721-1 AMD 1-1992环境条件的分类.第一部分:环境参数和它们的严酷性.第1次修改

Classification of environmental conditions; part 1: environmental parameters and their severities;amendment 13P;A4

（166） 351

IEC标准目录


开本页数

IEC 60721-1 AMD 2-1995环境条件的分类.第1部分:环境参数及其严酷程度的分级.第2次修改

Classification of environmental conditions - Part 1: Environmental parameters and theirseverities; Amendment 29P;A4

IEC 60721-1 Edition 2.2-2002 环境条件分类.第1部分:环境参数及其严酷程度Classification of environmental conditions - Part 1: Environmental parameters and their severities41P;A4

IEC 60721-1-1990 环境条件分类.第1部分:环境参数和严酷条件Classification of environmental conditions; part 1: environmental parameters and their severities41P;A4

IEC 60721-2-1 AMD 1-1987 第1次修改Classification of environmental conditions. Part 2: Environmental conditions appearing in nature.Temperature and humidity.

IEC 60721-2-1 Edition 1.1-2002环境条件分类.第2-1部分:自然界出现的环境条件.温度和湿

度

Classification of environmental conditions - Part 2-1: Environmental conditions appearing innature; Temperature and humidity57P;A4

IEC 60721-2-1-1982 环境条件分类.第2部分:自然环境条件.温度和湿度Classification of environmental conditions. Part 2: Environmental conditions appearing in nature.Temperature and humidity.26P;A4

IEC 60721-2-2-1988 环境条件分类.第2部分:自然环境条件.第2节:降水和风Classification of environmental conditions. Part 2: Environmental conditions appearing in nature.Precipitation and wind

IEC 60721-2-3-1987 环境条件分类.第2部分:自然环境条件.第3节:气压Classification of environmental conditions. Part 2: Environmental conditions appearing in nature.Air pressure.

IEC 60721-2-4 AMD 1-1988 环境条件分类.第2部分:自然环境条件.太阳辐射和温度Classification of environmental conditions. Part 2: Environmental conditions appearing in nature.Solar radiation and temperature.

IEC 60721-2-4 Edition 1.1-2002环境条件分类.第2-4部分:自然界出现的环境条件.太阳辐射

和温度

Classification of environmental conditions - Part 2-4: Environmental conditions appearing innature; Solar radiation and temperature29P;A4

IEC 60721-2-4-1987环境条件分类.第2部分:自然环境条件.第4节:太阳辐射和温

度

Classification of environmental conditions. Part 2: Environmental conditions appearing in nature.Solar radiation and temperature.15P;A4

IEC 60721-2-5-1991环境条件分类.第2部分:自然环境条件.第5节:粉尘、砂、盐

雾

Classification of environmental conditions; part 2: environmental conditions appearing in nature;section 5: dust, sand, salt mist35P;A4

IEC 60721-2-6-1990 环境条件分类.第2部分:自然环境条件.地震振动和冲击Classification of environmental conditions; part 2: environmental conditions appearing in nature;earthquake vibration and shock22P;A4

IEC 60721-2-7-1987 环境条件分类.第2部分:自然环境条件.第7节:动物群与植物

群

Classification of environmental conditions. Part 2: Environmental conditions appearing in nature.Fauna and flora.

IEC 60721-2-8-1994 环境条件分类.第2部分:自然环境条件.第8节:燃烧条件Classification of environmental conditions - Part 2: Environmental conditions appearing in nature- Section 8: Fire exposure43P;A4

IEC 60721-3-0 AMD 1-1987 第1次修改Classification of environmental conditions. Part 3 : Classification of groups of environmentalparameters and their severities. Introduction

（167） 351

IEC标准目录


开本页数

IEC 60721-3-0 Edition 1.1-2002环境条件分类.第3-0部分:环境参数组及其严酷程度的分类

分级.导言

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities; Introduction23P;A4

IEC 60721-3-0-1984环境条件分类.第3部分:环境参数组分类及其严酷程度分级.导言

Classification of environmental conditions: Part 3: Classification of groups of environmentalparameters and their severities. Introduction17P;A4

IEC 60721-3-1-1997环境条件的分类.第3部分:环境参数及其等级组的分类.第1节:储存

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 1: Storage42P;A4

IEC 60721-3-2-1997环境条件的分类.第3部分:环境参数及其等级组的分类.第2节:传输

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 2: Transportation46P;A4

IEC 60721-3-3 AMD 1-1995环境条件的分类.第3部分:环境参数组的分类及其严酷程度

分级.第3节:气候防护场所固定用.第1次修改

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 3: Stationary use at weatherprotected locations;Amendment 113P;A4

IEC 60721-3-3 AMD 2-1996环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第3节:气候防护场所用固定装置.修改件2

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 3: Stationary use at weatherprotected locations;Amendment 28P;A4


分级.在有气候防护场所的固定使用

Classification of environmental conditions - Part 3-3: Classification of groups of environmentalparameters and their severities; Stationary use at weatherprotected locations101P;A4

IEC 60721-3-3-1994环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第3节:气候防护场所用固定装置

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities; section 3: Stationary use at weatherprotected locations79P;A4

IEC 60721-3-4 AMD 1-1996环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第4节:在无天气防护位置固定使用的产品.修改件1

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 4: Stationary use at non-weatherprotected locations;Amendment 18P;A4

IEC 60721-3-4-1995环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第4节:在无天气防护位置固定使用的产品

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 4: Stationary use at non-weatherprotected locations53P;A4

IEC 60721-3-5-1997环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第5节:地面车辆装配

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 5: Ground vehicle installations56P;A4

IEC 60721-3-6 AMD 1-1991环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第6节:制造船舶所需环境.修改件1

Classification of environmental conditions; part 3: classification of groups of environmentalparameters and their severities; ship environment; amendment 13P;A4

（168） 351

IEC标准目录


开本页数

IEC 60721-3-6 AMD 2-1996环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第6节:制造船舶所需环境.修改件2

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 6: Ship environment; Amendment 28P;A4

IEC 60721-3-6-1987环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第6节:制造船舶所需环境

Classification of environmental conditions. Part 3 : Classification of groups of environmentalparameters and their severities. Introduction. Ship environment25P;A4

IEC 60721-3-7 AMD 1-1996环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第7节:便携式和不固定使用的产品.修改件1

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 7: Portable and non-stationary use; Amendment 18P;A4


分级.便携式和非固定使用

Classification of environmental conditions - Part 3-7: Classification of groups of environmentalparameters and their severities; Portable and non-stationary use71P;A4

IEC 60721-3-7-1995环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第7节:便携式和不固定使用的产品

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and their severities - Section 7: Portable and non-stationary use67P;A4

IEC 60721-3-9 AMD 1-1994环境条件分类.第3部分:环境参数组分类及其严酷程度分级.第9节:产品内微气候.第1次修改

Classification of environmental conditions - Part 3: Classification of groups of environmentalparameters and thier severities; section 9: Microclimates inside products; Amendment 13P;A4

IEC 60721-3-9-1993环境条件分类.第3部分:环境参数组及其严酷程度分类.第9节:产品内的小气候

Classification of environmental conditions; part 3: classification of groups of environmentalparameters and their severities; section 9: microclimates inside products21P;A4

IEC 60723-1-1982 电信用电感器和变压器磁芯.第1部分:总规范Inductor and transformer cores for telecommunications. Part 1 : Generic specification29P;A4

IEC 60723-2 AMD 1-1989电信用电感器和变压器磁芯.第2部分:分规范:用于电感器的

磁性氧化物磁芯.IEC 60723-2-83的修改件1

Inductor and transformers cores for telecommunications; part 2: sectional specification; magneticoxide cores for inductor applications; amendment No. 1 to publication 60723-2:19833P;A4

IEC 60723-2-1-1983电信用电感器和变压器磁芯.第2部分:分规范:用于电感器的

磁性氧化物磁芯.第1节:空白详细规范:A级评定

Inductor and transformer cores for telecommunications. Part 2 : Sectional specification -Magnetic oxide cores for induction applications. Blank detail specification. Assessment level A19P;A4

IEC 60723-2-1983电信用电感器和变压器磁芯.第2部分:分规范:用于电感器的

磁性氧化物磁芯

Inductor and transformer cores for telecommunications. Part 2 : Sectional specification -Magnetic oxide cores for induction applications19P;A4

IEC 60723-3-1-1985电信用电感器和变压器磁芯.第3部分:分规范:用于宽带变压

器的磁性氧化物磁芯.第1节:空白详细规范:A级和B级评定

Inductor and transformer cores for telecommunications. Part 3 : Sectional specification: Magneticoxide cores for broad-bandtransformers. Blank detail specification. Assessment levels A and B19P;A4

IEC 60723-3-1985电信用电感器和变压器磁芯.第3部分:分规范:宽带变压器用

磁性氧化物磁芯

Inductor and transformer cores for telecommunications. Part 3 : Sectional specification: Magneticoxide cores for broad-bandtransformers17P;A4

（169） 351

IEC标准目录


开本页数

IEC 60723-4-1-1987电信用电感器和变压器磁芯.第4部分:分规范:变压器用磁性

氧化磁芯和电力扼流圈.第1节:空白详细规范:A级评定

Inductor and transformer cores for telecommunications. Part 4 : Sectional specification: magneticoxide cores for transformers and chokes for power applications. Assessment level A17P;A4

IEC 60723-4-1987电信用电感器和变压器磁芯.第4部分:分规范:变压器用磁性

氧化磁芯和电力扼流圈

Inductor and transformer cores for telecommunications. Part 4 : Sectional specification: magneticoxide cores for transformers and chokes for power applications17P;A4

IEC 60723-5-1-1993电信用电感器和变压器铁芯.第5部分:分规范.同磁性氧化物

铁芯一起用于可调电感器和变压器的调节器.第1节:空白详

细规范.A级评定

Inductor and transformer cores for telecommunications; part 5: sectional specification: adjustersused with magnetic oxide cores for use in adjustable inductors and transformers; section 1: blankdetail specification; assessment level A15P;A4

IEC 60723-5-1993电信用电感器和变压器铁芯.第5部分:分规范:同磁性氧化物

铁芯一起用于可调电感器和变压器的调节器

Inductor and transformer cores for telecommunications; part 5: sectional specification: adjustersused with magnetic oxide cores for use in adjustable inductors and transformers19P;A4

IEC 60724-2000额定电压为1kV(U=1.2kV)和3kV(U=3.6kV)的电缆的短路温

度极限值

Short-circuit temperature limits of electric cables with a rated voltage of 1 kV (U = 1,2 kV) and 3kV (U = 3,6 kV)17P;A4

IEC 60726 AMD 1-1986 干式电力变压器.修改件1 Dry-type power transformers

IEC 60726-1982 干式电力变压器Dry-type power transformers39P;A4

IEC 60728-10-2001电视和声音信号用电缆分布系统.第10部分:回程线路的系

统性能

Cabled distribution systems for television and sound signals - Part 10: System performance ofreturn path28P;A4

IEC 60728-11 AMD 1-2000 电视和声音信号用电缆分布系统.第11部分:安全.修改件1Cabled distribution systems for television and sound signals - Part 11: Safety; Amendment 112P;A4

IEC 60728-11-1997 电视和声音信号用电缆分布系统.第11部分:安全Cabled distribution systems for television and sound signals - Part 11: Safety65P;A4

IEC 60728-1-2001电视和声音信号的电缆分布系统.第1部分:测量方法和系统

性能

Cabled distribution systems for television and sound signals - Part 1: Methods of measurementand system performance100P;A4

IEC 60728-12-2001电视和声音信号用电缆配线系统.第12部分:系统的电磁兼

容性

Cabled distribution systems for television and sound signals - Part 12: Electromagneticcompatibility of systems19P;A4

IEC 60728-2-2002电视和声音信号用电缆分配系统.第2部分:设备的电磁兼容

性

Cabled distribution systems for television and sound signals - Part 2: Electromagneticcompatibility for equipment41P;A4

IEC 60728-3-2000电视和声音信号用电缆配线系统.第3部分:有效同轴宽频分

配设备

Cabled distribution systems for television and sound signals - Part 3: Active coaxial widebanddistribution equipment93P;A4

（170） 351

IEC标准目录


开本页数

IEC 60728-4-2000电视和声音信号用电缆配线系统.第4部分:惰性同轴宽频分

配设备

Cabled distribution systems for television and sound signals - Part 4: Passive coaxial widebanddistribution equipment49P;A4

IEC 60728-5-2001 电视和声音信号的电缆分配系统.第5部分:头终端的设备Cabled distribution systems for television and sound signals - Part 5: Headend equipment129P;A4

IEC 60728-6-2001 电视和声音信号用电缆配线系统.第6部分:光学设备Cabled distribution systems for television and sound signals - Part 6: Optical equipment50P;A4

IEC 60728-9-2000电视和声音信号用电缆分配系统.第9部分:数字调制信号用

电缆分配系统的接口

Cabled distribution systems for television and sound signals - Part 9: Interfaces of cableddistribution systems for digitally modulated signals50P;A4

IEC 60729-1982 CAMAC机箱中的多重控制器Multiple controllers in a CAMAC crate63P;A4

IEC 60730-1-1999 家用和类似用途的电气自动控制器.第1部分:一般要求Automatic electrical controls for household and similar use - Part 1: General requirements514P;A4

IEC 60730-2-10 AMD 1-1994 第1次修改Automatic electrical controls for household and similar use - Part 2: Particular requirements forelectrically operated motor starting relays; Amendment 19P;A4

IEC 60730-2-10 AMD 2-2001家用和类似用途的电气自动控制器.第2-10部分:电驱动的

电动机起动继电器的特殊要求.修改件2

Automatic electrical controls for household and similar use - Part 2-10: Particular requirementsfor motor starting relays; Amendment 27P;A4

IEC 60730-2-10-1991家用和类似用途的电器自动控制器.第2部分第10节:电驱动

发动机起动继电器

Automatic electrical controls for household and similar use; part 2: particular requirements forelectrically operated motor starting relays19P;A4

IEC 60730-2-11-1997家用和类似用途的电器自动控制器.第2部分:能量调节器的

特殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forenergy regulators27P;A4

IEC 60730-2-1-1989家用和类似用途的电器自动控制器.第2部分第1节:家用电

器设备用的电气控制器安全特殊要求

Automatic electrical controls for household and similar use; part 2: particular requirements forelectrical controls for electrical household appliances25P;A4

IEC 60730-2-12 AMD 1-1995家用和类似用途的电自动控制器.第2部分:电操作门锁的特

殊要求.修改件1

Automatic electrical controls for household and similar use - Part 2: Particular requirements forelectrically operated door locks; Amendment 111P;A4

IEC 60730-2-12-1993家用和类似用途的电器自动控制器.第2部分第12节:电操作

门锁的特殊要求

Automatic electrical controls for household and similar use; part 2: particular requirements forelectrically operated door locks27P;A4

IEC 60730-2-13 AMD 2-2000家用及类似用途的电气自动控制器.第2-13部分:湿度敏感

度控制器的特殊要求.修改件2

Automatic electrical controls for household and similar use - Part 2-13: Particular requirementsfor humidity sensing controls; Amendment 213P;A4

（171） 351

IEC标准目录


开本页数

IEC 60730-2-13 Edition 1.2-2001

家用及类似用途的电自动控制器.第2部分:湿敏控制器的特

殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forhumidity sensing controls29P;A4

IEC 60730-2-13-1997家用和类似用途的电器自动控制器.第2部分:湿敏控制器的

特殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forhumidity sensing controls25P;A4

IEC 60730-2-14 AMD 1-2001家用和类似用途的电自动控制器.第2-14部分:电传动装置

的特殊要求.修改件1

Automatic electrical controls for household and similar use - Part 2-14: Particular requirementsfor electric actuators; Amendment 15P;A4

IEC 60730-2-14 Edition 1.1-2001

家用和类似用途的电自动控制器.第2-14部分:电传动装置

的特殊要求

Automatic electrical controls for household and similar use - Part 2-14: Particular requirementsfor electric actuators31P;A4

IEC 60730-2-14-1995家用和类似用途电器自动控制器.第2部分:电子传动装置的

特殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forelectric actuators33P;A4

IEC 60730-2-15-1997家用和类似用途电器自动控制器.第2部分:锅炉用浮子或电

极感应器型自动水位感知控制器的特殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forautomatic electrical water level sensing controls of the float or electrode-sensor type used inboiler applications37P;A4

IEC 60730-2-16 AMD 1-1997家用和类似用途的电器自动控制器.第2部分:家用和类似用

途浮子式水位自动电控制器的特殊要求.修改件1

Automatic electrical controls for household and similar use - Part 2: Particular requirements forautomatic electrical water level operating controls of the float type for household and similarapplications; Amendment 13P;A4

IEC 60730-2-16 AMD 2-2001家用和类似用途的电自动控制器.第2-16部分:家用和类似

用途浮子式水位自动电控制器的特殊要求

Automatic electrical controls for household and similar use - Part 2-16: Particular requirementsfor automatic electrical water level controls of the float type for household and similarapplications; Amendment 213P;A4

IEC 60730-2-16 Edition 1.2-2001

家用和类似用途的电自动控制器.第2-16部分:家用和类似

用途浮子式水位自动电控制器的特殊要求

Automatic electrical controls for household and similar use - Part 2-16: Particular requirementsfor automatic electrical water level controls of the float type for household and similar applications29P;A4

IEC 60730-2-17 AMD 1-2000家用和类似用途的自动电气控制.第2-17部分:电气操作气

体阀门的特殊要求,包括机械要求.修改件1

Automatic electrical controls for household and similar use - Part 2-17: Particular requirementsfor electrically operated gas valves, including mechanical requirements; Amendment 111P;A4

IEC 60730-2-17 Edition 1.1-2001

家用和类似用途的自动电气控制.第2-17部分:电控气阀的

特殊要求,包括机械要求

Automatic electrical controls for household and similar use - Part 2-17: Particular requirementsfor electrically operated gas valves, including mechanical requirements61P;A4

IEC 60730-2-17-1997家用及类似用途的电自动控制器.第2部分:包括机械要求的

电动气阀的特殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forelectrically operated gas valves, including mechanical requirements59P;A4

（172） 351

IEC标准目录


开本页数


自动水和空气流量感知控制器的特殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forautomatic electrical water and air flow sensing controls, including mechanical requirements39P;A4

IEC 60730-2-19 AMD 1-2000家用和类似用途的自动电气控制.第2-19部分:电气操作油

阀门的特殊要求,包括机械要求.修改件1

Automatic electric controls for household and similar use - Part 2-19: Particular requirements forelectrically operated oil valves, including mechanical requirements; Amendment 19P;A4

IEC 60730-2-19 Edition 1.1-2001

家用和类似用途的自动电气控制.第2-19部分:电控油阀的


Automatic electric controls for household and similar use - Part 2-19: Particular requirements forelectrically operated oil valves, including mechanical requirements55P;A4


电动油阀的特殊要求

Automatic electric controls for household and similar use - Part 2: Particular requirements forelectrically operated oil valves, including mechanical requirements55P;A4

IEC 60730-2-2-2001家用和类似用途的电气自动控制器.第2-2部分:电动机热保

护器的特殊要求

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements forthermal motor protectors45P;A4

IEC 60730-2-3 AMD 1-1995家用和类似用途的电器自动控制器.第2部分第3节:管形荧

光灯镇流器的热防护器的特殊要求.第1次修改

Automatic electrical controls for household and similar use - Part 2: Particular requirements forthermal protectors for ballast for tubular fluorescent lamps; Amendment 17P;A4

IEC 60730-2-3 AMD 2-2001家用和类似用途的电自动控制器.第2-3部分:管状荧光灯用

镇流器的热防护器的特殊要求.修改件2

Automatic electrical controls for household and similar use - Part 2-3: Particular requirements forthermal protectors for ballasts for tubular fluorescent lamps; Amendment 27P;A4

IEC 60730-2-3 Edition 1.2-2001家用和类似用途的电自动控制器.第2-3部分:管形荧光灯镇

流器的热防护器的特殊要求

Automatic electrical controls for household and similar use - Part 2-3: Particular requirements forthermal protectors for ballasts for tubular fluorescent lamps31P;A4

IEC 60730-2-3-1990家用和类似用途的电器自动控制器.第2部分第3节:管形荧

光灯镇流器的热防护器的特殊要求

Automatic electrical controls for household and similar use; part 2: particular requirements forthermal protectors for ballasts for tubular fluorescent lamps27P;A4

IEC 60730-2-4 AMD 1-1994 第1次修改

Automatic electrical controls for household and similar use; part 2: particular requirements forthermal motor protectors for motor-compressors of hermetic and semi-hermetic type; amendment1

IEC 60730-2-4 AMD 2-2001家用和类似用途的自动电控制器.第2-4部分:密封和半密封

的电动压缩机用防热电动保护器的特殊要求.修改件2

Automatic electrical controls for household and similar use - Part 2-4: Particular requirements forthermal motor protectors for motor-compressors of hermetic and semi-hermetic type;Amendment 2

IEC 60730-2-4 Edition 1.2-2002家用和类似用途的电气自动控制器.第2-4部分:密封和半密

封电动机-压缩机组的电动机热保护器的特殊要求

Automatic electrical controls for household and similar use - Part 2: Particular requirements forthermal motor protectors for motor-compressors of hermetic and semi-hermetic type35P;A4

IEC 60730-2-4-1990家用和类似用途的电器自动控制器.第2部分第4节:密封和

半密封式电动压缩机的电动机热保护装置的特殊要求

Automatic electrical controls for household and similar use; part 2: particular requirements forthermal motor protectors for motor-compressors of hermetic and semi-hermetic type37P;A4

（173） 351

IEC标准目录


开本页数

IEC 60730-2-5-2000家用和类似用途的电气自动控制器.第2-5部分:燃烧器电气

自动控制系统的特殊要求

Automatic electrical controls for household and similar use - Part 2-5: Particular requirements forautomatic electrical burner control systems97P;A4

IEC 60730-2-6 AMD 1-1994家用和类似用途的电器自动控制器.第2部分:自动压力传感

控制的特殊要求,包括机械要求.第1次修改

Automatic electrical controls for household and similar use - Part 2: Particular requirements forautomatic electrical pressure sensing controls including mechanical requirements; Amendment 121P;A4

IEC 60730-2-6 AMD 2-1997家用和类似用途用电器自动控制器.第2部分:包括机械要求

在内的自动电气压敏控制器的特殊要求.修改件2

Automatic electrical controls for household and similar use - Part 2: Particular requirements forautomatic electrical pressure sensing controls including mechanical requirements; Amendment 23P;A4

IEC 60730-2-6-1991家用和类似用途的电器自动控制器.第2部分:包括机械要求

在内的自动电气压敏控制器的特殊要求

Automatic electrical controls for household and similar use; part 2: particular requirements forautomatic electrical pressure sensing controls including mechanical requirements47P;A4

IEC 60730-2-7 AMD 1-1994 第1次修改Automatic electrical controls for household and similar use; part 2: particular requirements fortimers and time switches; amendment 19P;A4

IEC 60730-2-7-1990家用和类似用途的电器自动控制器.第2部分第7节:定时器

和定时开关的特殊要求

Automatic electrical controls for household and similar use; part 2: particular requirements fortimers and time switches49P;A4

IEC 60730-2-8 AMD 1-2002家用和类似用途的电气自动控制器.第2-8部分:电动水阀的

特殊要求(包括机械要求).修改件1

Automatic electrical controls for household and similar use - Part 2-8: Particular requirements forelectrically operated water valves, including mechanical requirements; Amendment 111P;A4

IEC 60730-2-8 Edition 2.1-2003家用和类似用途的电器自动控制器.第2-8部分:电动水阀的

特殊要求(包括机械要求)

Automatic electrical controls for household and similar use - Part 2-8: Particular requirements forelectrically operated water valves, including mechanical requirements86P;A4

IEC 60730-2-8-2000家用和类似用途的电气自动控制器.第2-8部分:电动水阀的


Automatic electrical controls for household and similar use - Part 2-8: Particular requirements forelectrically operated water valves, including mechanical requirements77P;A4

IEC 60730-2-9 AMD 1-2002家用和类似用途的电气自动控制器.第2-9部分:温度敏感控

制器的特殊要求.修改件1

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements fortemperature sensing controls; Amendment 121P;A4

IEC 60730-2-9 Edition 2.1-2002家用和类似用途的电气自动控制器.第2-9部分:温度敏感控

制器的特殊要求.修改件1

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements fortemperature sensing controls75P;A4

IEC 60730-2-9-2000家用和类似用途的电气自动控制器.第2-9部分:温度敏感控

制器的特殊要求

Automatic electrical controls for household and similar use - Part 2-9: Particular requirements fortemperature sensing controls77P;A4

IEC 60731 AMD 1-2002医用电气设备.放射治疗中使用的带电离室的剂量仪.修改

件1

Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy;Amendment 13P;A4

（174） 351

IEC标准目录


开本页数

IEC 60731-1997 医疗电气设备.在放射治疗中使用的带电离室的剂量仪Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy181P;A4

IEC 60732-1982 磁性氧化物圆柱形、管形和螺纹磁芯的测量方法Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides21P;A4

IEC 60734-2001 家用电器.性能.硬水试验Household electrical appliances - Performance - Hard water testing15P;A4

IEC 60735-1991 录像带性能的测量方法Measuring methods for video tape properties29P;A4

IEC 60737-1982核动力反应堆中燃料芯体温度或主包壳温度测量.特性和试

验方法

In-core temperature or primary envelope temperature measurements in nuclear power reactors.Characteristics and test methods25P;A4

IEC 60738-1-1-1998热敏电阻器.直热式突变型正温度系数.第1-1部分:空白详细

规范:限流应用.评估级别EZ

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blankdetail specification: Current limiting application - Assessment level EZ11P;A4

IEC 60738-1-1998 热敏电阻器.直热式突变型正温度系数.第1部分:总规范Thermistors - Directly heated positive step-function temperature coefficient - Part 1: Genericspecification49P;A4


规范:加热元件应用.评估级别EZ

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blankdetail specification: Heating element application - Assessment level EZ11P;A4


规范:起动电流应用.评估级别EZ

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blankdetail specification: Inrush current application - Assessment level EZ10P;A4


规范:敏感作用.评估级别EZ

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blankdetail specification: Sensing application - Assessment level EZ11P;A4

IEC 60739-1983 数字式计数率表.特性和试验方法Digital counting ratemeters. Characteristics and test methods73P;A4

IEC 60740 AMD 1-1991 通信和电子设备用变压器和电感器用铁芯片.第1次修改Laminations for transformers and inductors for use in telecommunication and electronicequipment; amendment 17P;A4

IEC 60740-1982 电信和电子设备用变压器和电感用叠片Laminations for transformers and inductors for use in telecommunication and electronicequipment

IEC 60740-2-1993电信和电子设备用变压器和电感器用铁芯片.第2部分:软磁

金属材料制铁芯片的小漏磁性规范

Laminations for transformers and inductors for use in telecommunication and electronicequipment; part 2: specification for the minimum permeabilities of laminations made of softmagnetic metallic materials38P;A4

IEC 60741-1982 多通道振幅分析器.时间-振幅转换器标准Multichannel amplitude analyzers: Standards for time-to-amplitude converters19P;A4

（175） 351

IEC标准目录


开本页数

IEC 60742 AMD 1-1992 第1次修改Isolating transformers and safety isolating transformers; requirements; amendment 167P;A4

IEC 60743-2001 带电作业用工具和设备术语Live working - Terminology for tools, equipment and devices97P;A4

IEC 60744-1983 核电厂的安全逻辑装置.特性和试验方法Safety logic assemblies of nuclear power plants. Characteristics and test methods25P;A4

IEC 60745-1 AMD 1-2002 手持式电动工具的安全.第1部分:一般要求.修改件1Hand-held motor-operated electric tools - Safety - Part 1: General requirements; Amendment 124P;A4

IEC 60745-1-2001 手持式电动工具.安全性.第1部分:一般要求Hand-held motor-operated electric tools - Safety - Part 1: General requirements95P;A4

IEC 60745-2-11-2003手持式电动工具的安全.第2-11部分:往复锯(曲线锯和刀锯)的特殊要求

Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements forreciprocating saws (jig and sabre saws)16P;A4

IEC 60745-2-1-2003手持式电动工具的安全.第2-1部分:电钻和冲击钻的特殊要

求

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills andimpact drills20P;A4

IEC 60745-2-12-2003手持式电动工具的安全.第2-12部分:混凝土振捣器的特殊

要求

Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concretevibrators16P;A4

IEC 60745-2-13 AMD 1-1992 第1次修改Safety of hand-held motor-operated electric tools; part 2: particular requirements for chain saws;amendment 17P;A4

IEC 60745-2-13-1989 手持式电动工具的安全.第2部分第13节:链锯的特殊要求Safety of hand-held motor-operated electric tools; part 2: particular requirements for chain saws21P;A4

IEC 60745-2-14-2003 手持式电动工具的安全.第2-14部分:电刨的特殊要求Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers26P;A4

IEC 60745-2-15-1984手持式电动工具的安全.第2部分第15节:修枝剪和剪草机的

特殊要求

Safety of hand-held motor-operated electric tools. Part 2-15: Particular requirements for hedgetrimmers and grass-shears17P;A4

IEC 60745-2-16-1993 手持式电动工具的安全.第2部分第16节:定位搭焊工的特殊

要求

Safety of hand-held motor-operated electric tools; part 2: particular requirements for tackers17P;A4

IEC 60745-2-17-2003手持式电动工具的安全.第2-17部分:木铣和修整机的特殊

要求

Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routersand trimmers30P;A4

IEC 60745-2-18-2003 手持式电动工具的安全.第2-18部分:打包工具的特殊要求Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strappingtools

IEC 60745-2-20-2003 手持式电动工具的安全.第2-20部分:带锯的特殊要求Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for bandsaws

IEC 60745-2-21-2002 手持式电动工具的安全.第2-21部分:排水式洗尘器的特殊

要求

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for draincleaners

（176） 351

IEC标准目录


开本页数

IEC 60745-2-2-2003手持式电动工具的安全.第2-2部分:电动螺丝刀和冲击扳手

的特殊要求

Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements forscrewdrivers and impact wrenches14P;A4

IEC 60745-2-3 AMD 1-1995手持式电动工具的安全.第2部分第3节:电磨、抛光机和盘

式砂光机的特殊要求.补充件1

Safety of hand-held motor operated electric tools - Part 2: Particular requirements for grinders,polishers and disk-type sanders; Amendment 13P;A4

IEC 60745-2-3-1984手持式电动工具的安全.第2部分第3节:电磨、抛光机和盘

式砂光机的特殊要求

Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for grinders,polishers and disk-type sanders17P;A4

IEC 60745-2-4-2002手持式电动工具的安全.第2-4部分:盘式除外的砂轮机和抛

光机的特殊要求

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sandersand polishers other than disk type8P;A4

IEC 60745-2-5-2003 手持式电动工具的安全.第2-5部分:圆盘锯的特殊要求Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circularsaws

IEC 60745-2-6-2003 手持式电动工具的安全.第2-6部分:电锤的特殊要求Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers18P;A4

IEC 60745-2-7-1989手持式电动工具的安全.第2部分:不可燃烧液体用喷枪的特

殊要求

Safety of hand-held motor-operated electric tools; part 2: particular requirements for spray gunsfor non-flammable liquids15P;A4

IEC 60745-2-8-2003手持式电动工具的安全.第2-8部分:金属板剪和步冲轮廓机

的特殊要求

Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for sheetmetal shears and nibblers26P;A4

IEC 60745-2-9-2003 手持式电动工具的安全.第2-9部分:攻丝机的特殊要求Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers26P;A4

IEC 60746-1-2003 电化学分析仪性能的表示法.第1部分:总则Expression of performance of electrochemical analyzers - Part 1: General30P;A4

IEC 60746-2-2003 电化学分析仪性能的表示法.第2部分:pH值Expression of performance of electrochemical analyzers - Part 2: pH- value28P;A4

IEC 60746-3-2002 电化学分析器性能表示.第3部分:电解导电率Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity17P;A4

IEC 60746-4-1992电化学分析仪性能的表示法.第4部分:用包有薄膜的电流传

感测量的水中溶解氧

Expression of performance of electrochemical analyzers; part 4: dissolved oxygen in watermeasured by membrane covered amperometric sensors56P;A4

IEC 60746-5-1992 电化学分析仪性能的表示法.第5部分:氧化还原电势Expression of performance of electrochemical analyzers; part 5: oxidation-reduction potential orredox potential55P;A4

IEC 60747-1 AMD 3-1996 半导体器件.分立器件和集成电路.第1部分:总则.第3次修改Semiconductor devices - Discrete devices and integrated circuits - Part 1: General; Amendment3

（177） 351

IEC标准目录


开本页数

IEC 60747-10 AMD 1-1995半导体器件.第10部分:分立器件和集成电路的总规范.第1次修改

Semiconductor devices - Part 10: Generic specification for discrete devices and integratedcircuits; Amendment 15P;A4

IEC 60747-10 AMD 2-1996半导体器件.第10部分:分立器件和集成电路的总规范.补充

件2


IEC 60747-10 AMD 3-1996半导体器件.第10部分:分立器件和集成电路的总规范.修改

件3


IEC 60747-10-1991 半导体器件.第10部分:分立器件和集成电路的总规范Semiconductor devices; part 10: generic specification for discrete devices and integrated circuits86P;A4

IEC 60747-11 AMD 1-1991 半导体器件.第11部分:分立器件分规范.第1次修改Semiconductor devices; part 11: sectional specification for discrete devices; amendment 15P;A4

IEC 60747-11 AMD 2-1996 半导体器件.第11部分:分立器件分规范.第2次修改Semiconductor devices - Part 11: Sectional specification for discrete devices; Amendment 215P;A4

IEC 60747-11-1985 半导体器件.分立器件.第11部分:分立器件分规范Semiconductor devices. Discrete devices. Part 11 : Sectional Specification for discrete devices35P;A4

IEC 60747-1-1983 半导体器件.分立器件.第1部分:总则Semiconductor devices. Discrete devices. Part 1 : General113P;A4

IEC 60747-12-1-1995半导体器件.第12部分:光电子器件.第2节:光缆系统和子系

统用的带有引线的激光二极管模数的空白详细规范

Semiconductor devices - Part 12: Optoelectronic devices - Section 1: Blank detail specificationfor light emitting/infrared emitting diodes with/without pigtail for fibre optic systems or sub-systems

IEC 60747-12-1991 半导体器件.第12部分:光电器件的分规范Semiconductor devices; part 12: sectional specification for optoelectronic devices39P;A4

IEC 60747-12-2-1995半导体器件.第12部分:光电子器件.第2节:光缆系统和子系

统用的带有引线的激光二极管模数的空白详细规范

Semiconductor devices - Part 12: Optoelectronic devices - Section 2: Blank detail specificationfor laser diode modules with pigtail for fibre optic systems and sub-systems31P;A4

IEC 60747-12-3-1998半导体器件.第12-3部分:光电子器件.发光二极管的空白详

细规范.显示应用

Semiconductor devices - Part 12-3: Optoelectronic devices - Blank detail specification for light-emitting diodes - Display application12P;A4

IEC 60747-12-4-1997半导体器件.第12-4部分:光电子器件.光纤维系统或分系统

用带/不带引线的场效应管管脚组件额空白详细规格

Semiconductor devices - Part 12-4: Optoelectronic devices - Blank detail specification for pin-FET modules with/without pigtail, for fibre optic systems or subsystems29P;A4

IEC 60747-12-5-1997半导体器件.第12-5部分:光电子器件.光纤系统或子系统用

有/无引线的针形光电管空白详细规范

Semiconductor devices - Part 12-5: Optoelectronic devices - Blank detail specification of pin-photodiodes with/without pigtail, for fibre optic systems or subsystems25P;A4

IEC 60747-12-6-1997半导体器件.第12-6部分:光电子器件.光纤系统或子系统用

有/无引线的雪崩光电管空白详细规范

Semiconductor devices - Part 12-6: Optoelectronic devices - Blank detail specification foravalanche photodiodes with/without pigtail, for fibre optic systems or subsystems29P;A4

（178） 351

IEC标准目录


开本页数

IEC 60747-14-1-2000 半导体器件.第14-1部分:半导体传感器.总则和分类Semiconductor devices - Part 14-1: Semiconductor sensors; General and classification10P;A4

IEC 60747-14-2-2000 半导体器件.第14-2部分:半导体感应器.霍尔元件Semiconductor devices - Part 14-2: Semiconductor sensors; Hall elements14P;A4

IEC 60747-14-3-2001 半导体器件.第14-3部分:半导体传感器.压力传感器Semiconductor devices - Part 14-3: Semiconductor sensors; Pressure sensors18P;A4

IEC 60747-16-1-2001 半导体器件.第16-1部分:微波集成电路.放大器Semiconductor devices - Part 16-1: Microwave integrated circuits; Amplifiers44P;A4

IEC 60747-16-2-2001 半导体器件.第16-2部分:微波集成电路.频率预定标器Semiconductor devices - Part 16-2: Microwave integrated circuits; Frequency prescalers29P;A4

IEC 60747-16-3-2002 半导体器件.第16-3部分:微波集成电路.频率变压器Semiconductor devices - Part 16-3: Microwave integrated circuits; Frequency converters40P;A4

IEC 60747-2-1-1989半导体器件.分立器件.第2部分:整流二极管.第1节:电流在

100A以下具有规定环境和外壳的整流二极管(包括雪崩式

整流二极管)的空白详细规范

Semiconductor devices; discrete devices; part 2: rectifier diodes; section one: blank detailspecification for rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, upto 100 A23P A4

IEC 60747-2-2000 半导体器件.分立器件和集成电路.第2部分:整流二极管Semiconductor devices - Discrete devices and integrated circuits - Part 2: Rectifier diodes129P;A4

IEC 60747-2-2-1993半导体器件.分立器件.第2部分:整流二极管.第1节:电流在

100A以上具有规定环境和外壳的整流二极管(包括雪崩式

整流二极管)的空白详细规范

Semiconductor devices; discrete devices; part 2: rectifier diodes; section 2: blank detailspecification for rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, forcurrents greater than 100 A31P;A4

IEC 60747-3 AMD 1-1991 第1次修改Semiconductor devices; discrete devices; part 3: signal (including switching) and regulatordiodes; amendment 111P;A4

IEC 60747-3 AMD 2-1993半导体器件.分立器件.第3部分:信号二极管(包括开关二极

管和稳压二极管).第2次修改件

Semiconductor devices; discrete devices; part 3: signal (including switching) and regulatordiodes; amendment 27P;A4

IEC 60747-3-1-1986半导体器件.分立器件.第3部分:信号二极管(包括开关二极

管)和调节二极管.第1节:信号二极管、开关二极管和受控雪

崩二极管空白详细规范

Semiconductor devices. Discrete devices. Part 3 : Signal (including switching) and regulatordiodes. Section One: Blank detail specification for signal diodes, switching diodes and controlled-avalanche diodes

IEC 60747-3-1985半导体器件.分立器件.第3部分:信号二极管(包括开关二极

管和稳压二极管)

Semiconductor devices. Discrete devices. Part 3 : Signal (including switching) and regulatordiodes.

IEC 60747-3-2-1986半导体器件.分立器件.第3部分:信号二极管(包括开关二极

管)和调节二极管.第2节:稳压二极管和基准电压二极管(不包括温度补偿精密基准二极管)的空白详细规范

Semiconductor devices. Discrete devices. Part 3 : Signal (including switching) and regulatordiodes. Section Two: Blank detail specification for voltage-regulator diodes and voltage-referencediodes, excluding temperature-compensated precision reference diodes

IEC 60747-4 AMD 1-1993 第1次修改Semiconductor devices; discrete devices; part 4: microwave diodes and transistors; amendment1

IEC 60747-4 AMD 2-1999 半导体设备.分立设备.第4部分:微波设备.补充件2Semiconductor devices - Discrete devices - Part 4: Microwave devices; Amendment 242P;A4

（179） 351

IEC标准目录


开本页数

IEC 60747-4 Edition 1.2-2001 半导体器件.分立器件.第4部分:微波器件Semiconductor devices - Discrete devices - Part 4: Microwave devices219P;A4

IEC 60747-4-1-2000半导体器件.分立器件.第4-1部分:微波二极管和晶体管.微波领域有效晶体管.空白详细规范

Semiconductor devices - Discrete devices - Part 4-1: Microwave diodes and transistors;Microwave field effect transistors; Blank detail specification17P;A4

IEC 60747-4-1991 半导体器件.分立器件.第4部分:微波二极管和晶体管Semiconductor devices; discrete devices; part 4: microwave diodes and transistors159P;A4

IEC 60747-4-2-2000半导体器件.分立器件和集成电路.第4-2部分:微波二极管和

晶体管.集成线路微波放大器.空白详细规范

Semiconductor devices - Discrete devices - Part 4-2: Microwave diodes and transistors -Integrated-circuit microwave amplifiers - Blank detail specification17P;A4

IEC 60747-5-1 AMD 1-2001半导体分立器件和集成电路.第5-1部分:光电器件.总则.修改件1

Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices;General; Amendment 17P;A4

IEC 60747-5-1 AMD 2-2002 半导体分立器件和集成电路.第5-1部分:光电子器件.总则Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices;General; Amendment 215P;A4

IEC 60747-5-1-1997 半导体分立器件和集成电路.第5-1部分:光电子器件.总规范Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices -General

IEC 60747-5-2 AMD 1-2002半导体分立器件和集成电路.第5-2部分:光电子器件.基础额

定值及特性

Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices;Essential ratings and characteristics; Amendment 223P;A4

IEC 60747-5-2-1997半导体分立器件和集成电路.第5-2部分:光电子器件.基本额

定值及特性

Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices -Essential ratings and characteristics51P;A4

IEC 60747-5-3 AMD 1-2002半导体分立器件和集成电路.第5-3部分:光电子器件.测量方

法

Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices;Measuring methods; Amendment 125P;A4

IEC 60747-5-3-1997半导体分立器件和集成电路.第5-3部分:光电子器件.测试方

法

Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices -Measuring methods61P;A4

IEC 60747-6-1-1989半导体器件.分立器件.第6部分:晶闸管.第1节:电流在100A以下的额定环境和外壳的反向阻断三极闸流晶体管的空白详细规范

Semiconductor devices; discrete devices; part 6: thyristors; section one: blank detail specificationfor reverse blocking triode thyristors, ambient and case-rated, up to 100 A25P;A4

IEC 60747-6-2000 半导体装置.第6部分:三极管 Semiconductor devices - Part 6: Thyristors

IEC 60747-6-2-1991半导体器件.分立器件.第6部分:晶体闸流管.第2节:双向三极

晶体闸流(三极双向可控硅开关元件),电流多为100A空白

详细规范

Semiconductor devices; discrete devices; part 6: thyristors; section 2: blank detail specificationfor bidirectional triode thyristors (triacs), ambient or case, up to 100 A29P;A4

IEC 60747-6-3-1993半导体器件.分立器件.第6部分:晶体闸流管.第3节:电流在

100A以下的额定环境和外壳的反向阻挡三极闸流晶体管的

空白详细规范

Semiconductor devices; discrete devices; part 6: thyristors: section 3: blank detail specificationfor reverse blocking triode thyristors, ambient and case-rated, for currents greater than 100 A31P;A4

（180） 351

IEC标准目录


开本页数

IEC 60747-7-1-1989半导体器件.分立器件.第7部分:双极性晶体管.第1节:低频和

高频放大用的额定环境晶体管的空白详细规范

Semiconductor devices; discrete devices; part 7: bipolar transistors; section one: blank detailspecification for ambient-rated bipolar transistors for low and high-frequency amplification31P;A4

IEC 60747-7-2000 半导体装置.第7部分:双极晶体管Semiconductor devices - Part 7: Bipolar transistors239P;A4

IEC 60747-7-2-1989半导体器件.分立器件.第7部分:双极性晶体管.第2节:低频放

大用的额定环境双极性晶体管的空白详细规范

Semiconductor devices; discrete devices; part 7: bipolar transistors; section two: blank detailspecification for case-rated bipolar transistors for low-frequency amplification27P;A4

IEC 60747-7-3-1991半导体器件.分立器件.第7部分:双极晶体管.第3节:开关设备

用双极晶体管的空白详细规范

Semiconductor devices; discrete devices; part 7: bipolar transistors; section 3: blank detailspecification for bipolar transistors for switching appliances35P;A4

IEC 60747-7-4-1991半导体器件.分立器件.第7部分:双极晶体管.第4节:高频放大

双极晶体管的空白详细规范

Semiconductor devices; discrete devices; part 7: bipolar transistors; section 4: blank detailspecification for case-rated bipolar transistors for high-frequency amplification33P;A4

IEC 60747-8-1-1987 半导体器件.分立器件.第8部分:场效应晶体管.第1节:1GHz5W以下的单栅极场效应晶体管的空白详细规范

Semiconductor devices - Discret devices. Part 8: Field-effect transistors. Blank detailspecification for single-gate field-effect transistors, up to 5 W and 1 GHz.

IEC 60747-8-2000 半导体装置.第8部分:场效应晶体管Semiconductor devices - Part 8: Field-effect transistors135P;A4

IEC 60747-8-2-1993半导体器件.分立器件.第8部分:场效应晶体管.第2节:外壳限

定的功率放大器用场效应晶体管空白详细规范

Semicoductor devices; discrete devices; part 8: field-effect transistors; section 2: blank detailspecification for field-effect transistors for case-rated power amplifier applications35P;A4

IEC 60747-8-3-1995半导体器件.分立器件和集成电路.第8部分:场效应晶体管.第3节:开关电路用场效应晶体管空白详细规范

Semiconductor devices - Discrete devices - Part 8: Field-effect transistors - Section 3: Blankdetail specification for case-rated field-effect transistors for switching applications37P;A4

IEC 60747-9 AMD 1-2001 半导体器件.第9部分:绝缘双极晶体管(IGBTS).修改件1Semiconductor devices - Part 9: Insulated-gate bipolar transistors (IGBTs); Amendment 179P;A4

IEC 60747-9 Edition 1.1-2001 半导体器件.分立器件.第9部分:绝缘双极晶体管(IGBTS)Semiconductor devices - Discrete devices - Part 9: Insulated-gate bipolar transistors (IGBTs)131P;A4

IEC 60747-9-1998 半导体器件.分立器件.第9部分:绝缘双极晶体管(IGBTS)Semiconductor devices - Discrete devices - Part 9: Insulated-gate bipolar transistors (IGBTs)51P;A4

IEC 60748-11 AMD 1-1995半导体器件.集成电路.第11部分:半导体集成电路(混合电路

除外)的分规范.第1次修改

Semiconductor devices - Integrated circuits - Part 11: Sectional specification for semiconductorintegrated circuits excluding hybrid circuits; Amendment 111P;A4

IEC 60748-11 AMD 2-1999半导体器件.集成电路.第11部分:不包括混合电路的半导体

集成线路分规范.补充件2

Semiconductor devices - Integrated circuits - Part 11: Sectional specification for semiconductorintegrated circuits excluding hybrid circuits; Amendment 25P;A4

IEC 60748-11-1-1992半导体器件.集成电路.第11部分第1节:半导体集成电路(混合电路除外)内部目视检查

Semiconductor devices; integrated circuits; part 11; section 1: internal visual examination forsemiconductor integrated circuits excluding hybrid circuits71P;A4

（181） 351

IEC标准目录


开本页数

IEC 60748-11-1990半导体器件.集成电路.第11部分:半导体集成电路(混合电路

除外)的分规范

Semiconductor devices; integrated circuits; part 11: sectional specification for semiconductorintegrated circuits excluding hybrid circuits63P;A4

IEC 60748-1-2002 半导体器件.集成电路.第1部分:总则Semiconductor devices - Integrated circuits - Part 1: General57P;A4

IEC 60748-20 AMD 1-1995半导体器件.集成电路.第20部分:薄膜集成电路及混合薄膜

集成电路的总规范.第1次修改

Semiconductor devices - Integrated circuits - Part 20: Generic specification for film integratedcircuits and hybrid film integrated circuits; Amendment 17P;A4

IEC 60748-20-1-1994半导体器件.集成电路.第20部分:薄膜集成电路及混合薄膜

集成电路的总规范.第1节:内部表观检验要求

Semiconductor devices; integrated circuits; part 20: generic specification for film integratedcircuits and hybrid film integrated circuits; section 1: requirements for internal visual examination55P;A4

IEC 60748-20-1988 半导体器件.集成电路.第20部分:薄膜集成电路及混合薄膜

集成电路的总规范

Semiconductor devices - Intergrated circuits. Part 20: Generic specification for film integratedcircuits and hybrid film intergrated circuits

IEC 60748-2-10-1994半导体器件.集成电路.第2部分:数字集成电路.第10节:集成

电路动态读/写存储器空白详细规范

Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits; section 10: Blankdetail specification for integrated circuit dynamic read/write memories43P;A4

IEC 60748-21-1-1997半导体器件.集成电路.第21部分第1节:基于质量保证程序的

薄膜集成电路和混合薄膜集成电路空白详细规范

Semiconductor devices - Integrated circuits - Part 21-1: Blank detail specification for filmintegrated circuits and hybrid film integrated circuits on the basis of qualification approvalprocedures

IEC 60748-2-11-1999半导体器件.集成电路.第2-11部分:数字集成线路.单供应集

成电路空白详细规范.电可擦的,只读程序化存储器

Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detailspecification for single supply integrated circuit, electrically erasable, and programmable read-only memory39P;A4

IEC 60748-2-1-1991半导体器件.集成电路.第2部分:数字集成电路.第1节:双极整

体数字集成电路门(自由逻辑数组除外)

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 1: blankdetail specification for bipolar monolithic digital integrated circuits gates (excluding uncommittedlogic arrays)31P;A4

IEC 60748-21-1997半导体器件.集成电路.第21部分:基于质量保证程序的薄膜

集成电路和混合薄膜集成电路分规范

Semiconductor devices - Integrated circuits - Part 21: Sectional specification for film integratedcircuits and hybrid film integrated circuits on the basis of the qualification approval procedure43P;A4

IEC 60748-2-12-2001半导体装置.集成电路.第2-12部分:数字集成电路.程序逻辑

装置的空白详细规范

Semiconductor devices - Integrated circuits - Part 2-12: Digital integrated circuits; Blank detailspecification for programmable logic devices (PLDs)51P;A4

IEC 60748-2-1997 半导体器件.集成电路.第2部分:数字集成电路Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits347P;A4

IEC 60748-2-2 AMD 1-1994 第1次修改

Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits - Section 2: Familyspecification for HCMOS digital integrated circuits, series 54/74 HC, 54/74 HCT, 54/74 HCU;Amendment 15P;A4

（182） 351

IEC标准目录


开本页数

IEC 60748-2-20-2000半导体器件.集成电路.第2-20部分:数字集成电路.系列规范:低压集成电路

Semicondutor devices - Integrated circuits - Part 2-20: Digital integrated circuits; Familyspecifications: Low voltage integrated circuits13P;A4

IEC 60748-22-1-1997半导体器件.集成电路.第22部分第1节:基于能力鉴定程序的

薄膜集成电路和混合薄膜集成电路空白详细规范

Semiconductor devices - Integrated circuits - Part 22-1: Blank detail specification for filmintegrated circuits and hybrid film integrated circuits on the basis of the capability approvalprocedures

IEC 60748-2-2-1992半导体器件.集成电路.第2部分:数字集成电路.第2节:54/74HC、54/74HCT、54/74HCU系列的HCMOS数字

集成电路类规范

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 2: familiyspecification for HCMOS digital integrated circuits, series 54/74 HC, 54/74 HCT, 54/74 HCU43P;A4

IEC 60748-22-1997半导体器件.集成电路.第22部分:基于能力鉴定程序的薄膜

集成电路和混合薄膜集成电路分规范

Semiconductor devices - Integrated circuits - Part 22: Sectional specification for film integratedcircuits and hybrid film integrated circuits on the basis of the capability approval procedures121P;A4

IEC 60748-2-3-1992半导体器件.集成电路.第2部分:数字集成电路.第3节:54/74HC、54/74HCT、54/74HCU系列的HCMOS数字

集成电路的空白详细规范

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 3: blankdetail specification for HCMOS digital integrated circuits (series 54/74 HC, 54/74 HCT, 54/74HCU)25P A4

IEC 60748-23-2-2002半导体器件.集成电路.第23-2部分:混合集成电路和薄膜结

构.生产线认证.内部审查和特殊试验

Semiconductor devices - Integrated circuits - Part 23-2: Hybrid integrated circuits and filmstructures; Manufacturing line certification; Internal visual inspection and special tests97P;A4

IEC 60748-2-4-1992半导体器件.集成电路.第2部分:数字集成电路.第4节:互补金

属氧化物半导体数字集成电路类规范.系列4000B和4000UB

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section four: familyspecification for complementary MOS digital integrated circuits; series 4000 B and 4000 UB29P;A4

IEC 60748-2-5-1992半导体器件.集成电路.第2部分:数字集成电路.第5节:互补金

属氧化物半导体数字集成电路空白详细规范.系列4000B和4000UB

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section five: blankdetail specification for complementary MOS digital integrated circuits; series 4000 B and 4000UB

IEC 60748-2-6-1992半导体器件.集成电路.第2部分:数字集成电路.第6节:微处理

机集成电路的空白详细规范

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section six: blankdetail specification for microprocessor integrated circuits41P;A4

IEC 60748-2-7-1992半导体器件.集成电路.第2部分:数字集成电路.第7节:集成电

路可熔断线路可编程双极只读存储器空白详细规范

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 7: blankdetail specification for integrated circuit fusible-link programmable bipolar read-only memories41P;A4

IEC 60748-2-8-1993半导体器件.集成电路.第2部分:数字集成电路.第8节:集成电

路静态读/写存储器空白详细规范

Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 8: blankdetail specification for integrated circuit static read/write memories37P;A4

IEC 60748-2-9-1994半导体器件.集成电路.第2部分:数字集成电路.第9节:MOS超紫外光可删除可编程只读存储器空白详细规范

Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits; section 9: Blankdetail specification for MOS ultraviolet light erasable electrically programmable read-onlymemories

IEC 60748-3 AMD 1-1991 第1次修改Semiconductor devices; integrated circuits; part 3: analogue integrated circuits; amendment 167P;A4

IEC 60748-3 AMD 2-1994 第2次修改Semiconductor devices; integrated circuits; part 3: analogue integrated circuits; amendment 225P;A4

（183） 351

IEC标准目录


开本页数

IEC 60748-3-1-1991半导体器件.集成电路.第3部分:模拟集成电路.第1节:单块集

成电路运算放大器

Semiconductor devices; integrated circuits; part 3: analogue integrated circuits; section 1: blankdetail specification for monolithic integrated operational amplifiers33P;A4

IEC 60748-3-1986 半导体器件.集成电路.第3部分:模拟集成电路Semiconductor devices. Integrated circuits.. Part 3 : Analogue integrated circuits263P;A4

IEC 60748-4-1-1993 半导体器件.集成电路.空白详细规.线性数字模拟变压器Semiconductor devices; integrated circuits; part 4: interface integrated circuits; section 1: blankdetail specification for linear digital-to-analogue converters (DAC)41P;A4

IEC 60748-4-1997 半导体器件.集成电路.第4部分:界面集成电路Semiconductor devices - Integrated circuits - Part 4: Interface integrated circuits355P;A4

IEC 60748-4-2-1993 半导体设备.集成电路.空白详细规范.线性数字模拟转换器Semiconductor devices; integrated circuits 4: interface integrated circuits; section 2: blank detailspecification for linear analogue-to-digital converters (ADC)39P;A4

IEC 60748-5-1997 半导体器件.集成电路.第5部分:半非标准集成电路Semiconductor devices - Integrated circuits - Part 5: Semicustom integrated circuits47P;A4

IEC 60749 AMD 1-2000 半导体器件.机械和气候试验方法.修改件1Semiconductor devices - Mechanical and climatic test methods; Amendment 121P;A4

IEC 60749 AMD 2-2001 半导体器件.机械和气候试验方法.修改件2Semiconductor devices - Mechanical and climatic test methods; Amendment 263P;A4

IEC 60749-10-2002 半导体器件.机械和气候试验方法.第10部分: 机械振动Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock7P;A4

IEC 60749-11-2002半导体器件.机械和气候试验方法.第11部分: 温度的急速变

化.双液电镀槽法

Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change oftemperature; Two-fluid-bath method13P;A4

IEC 60749-1-2002 半导体器件.机械和气候试验方法.第1部分:总则Semiconductor devices - Mechanical and climatic test methods - Part 1: General15P;A4

IEC 60749-12-2002 半导体器件.机械和气候试验方法.第12部分: 振动,可变频率Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variablefrequency

IEC 60749-13-2002 半导体器件.机械和气候试验方法.第13部分: 盐性环境Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere9P;A4

IEC 60749-15-2003半导体器件.机械和气候试验方法.第15部分:通孔安装设备

的耐钎焊温度

Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to solderingtemperature for through-hole mounted devices20P;A4

IEC 60749-16-2003半导体器件.机械和气候试验方法.第16部分:粒子冲击噪声

探测(PIND)

Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noisedetection (PIND)22P;A4

IEC 60749-17-2003 半导体器件.机械和气候试验方法.第17部分:中子辐照Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation20P;A4

IEC 60749-18-2002 半导体器件.机械和气候试验方法.第18部分:电离辐射(总剂

量)

Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (totaldose)

（184） 351

IEC标准目录


开本页数

IEC 60749-19-2003 半导体器件.机械和气候试验方法.第19部分:模剪切强度试

验

Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength test20P;A4

IEC 60749-1996 半导体器件.机械和气候试验方法Semiconductor devices - Mechanical and climatic test methods95P;A4

IEC 60749-20-2002半导体器件.机械和气候试验方法.第20部分:SMDs塑料囊

状物抗湿气和焊接热的综合影响

Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat49P;A4

IEC 60749-2-2002 半导体器件.机械和气候试验方法.第2部分:低气压Semiconductor devices - Mechanical and climatic test methods - Part 2: Low air pressure11P;A4

IEC 60749-22-2002 半导体器件.机械和气候试验方法.第22部分:粘接强度Semiconductor devices - Mechanical and climatic test methods - Part 22: Bond strength41P;A4

IEC 60749-31-2002半导体器件.机械和气候试验方法.第31部分:塑料密封器件

的易燃性(内部感应)

Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced)9P;A4

IEC 60749-3-2002 半导体器件.机械和气候试验方法.第3部分:外观检验Semiconductor devices - Mechanical and climatic test methods - Part 3: External visualexamination

IEC 60749-32-2002半导体器件.机械和气候试验方法.第32部分:塑料密封器件

的易燃性(外部感应)

Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced)9P;A4

IEC 60749-36-2003 半导体器件.机械和气候试验方法.第36部分:稳态加速Semiconductor devices - Mechanical and climatic test methods - Part 36: Acceleration, steadystate

IEC 60749-4-2002半导体器件.机械和气候试验方法.第4部分:湿热,稳态,高加

速应力试验

Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steadystate, highly accelerated stress test (HAST)15P;A4

IEC 60749-5-2003半导体器件.机械和气候试验方法.第5部分:稳态温度湿度偏

差耐久性试验

Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-statetemperature humidity bias life test22P;A4

IEC 60749-6-2002 半导体器件.机械和气候试验方法.第6部分:高温下储存Semiconductor devices - Mechanical and climatic test methods - Part 6: Storage at hightemperature

IEC 60749-7-2002半导体器件.机械和气候试验方法.第7部分:其他残余气体的

分析和内部水分含量的测量

Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture contentmeasurement and the analysis of other residual gases15P;A4

IEC 60749-8-2002 半导体器件.机械和气候试验方法.第8部分:密封Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing31P;A4

IEC 60749-9-2002 半导体器件.机械和气候试验方法.第9部分:标记的永久性Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking9P;A4

IEC 60751 AMD 1-1986 工业铂电阻温度计传感器 Industrial platinium resistance thermometer sensors

IEC 60751 AMD 2-1995 工业铂电阻温度计敏感元件.第2次修改Industrial platinum resistance thermometer sensors; Amendment 25P;A4

（185） 351

IEC标准目录


开本页数

IEC 60751-1983 工业铂电阻温度计传感器Industrial platinium resistance thermometer sensors39P;A4

IEC 60754-1-1994电缆燃烧放出的气体的试验.第1部分:电缆中的聚合物燃烧

时放出的氢卤酸气体量的测定

Test on gases evolved during combustion of materials from cables; part 1: determination of theamount of halogen acid gas25P;A4

IEC 60754-2 AMD 1-1997电缆燃烧时排出气体的试验.第2部分:通过测量pH值和电导

性来测定电缆中的材料在燃烧时所排气体的酸度.修改件1

Test on gases evolved during combustion of electric cables - Part 2: Determination of degree ofacidity of gases evolved during the combustion of materials taken from electric cables bymeasuring pH and conductivity; Amendment 17P;A4

IEC 60754-2-1991电缆燃烧放出的气体的试验.第2部分:用测量pH值和导电性

的方法对电缆中的材料燃烧时释出气体的酸度的测定

Test on gases evolved during combustion of electric cables; part 2: determination of degree ofacidity of gases evolved during the combustion of materials taken from electric cables bymeasuring pH and conductivity27P;A4

IEC 60755 AMD 1-1988残余电流操作保护设备的一般要求.IEC 60755-83的修改件

1

General requirements for residual current operated protective devices; amendment No. 1 topublication 60755-198317P;A4

IEC 60755 AMD 2-1992 剩余电流保护器的一般要求.第2次修改General requirements for residual current operated protective devices; amendment 221P;A4

IEC 60755-1983 对剩余电流动作保护器的一般要求General requirements for residual current operated protective devices96P;A4

IEC 60756-1991 非广播磁带录像机的时基稳定性Non-broadcast video tape recorders; time based stability21P;A4

IEC 60757-1983 颜色标示的代号Code for designation of colours7P;A4

IEC 60758 AMD 1-1997 人造石英晶体.规范和使用指南.修改件1Synthetic quartz crystal - Specifications and guide to the use; Amendment 19P;A4

IEC 60758 AMD 2-2001 合成石英晶体.规范和使用指南.修改件2Synthetic quartz crystal - Specifications and guide to the use; Amendment 219P;A4

IEC 60758-1993 人造石英晶体.规范和使用导则Synthetic quartz crystal; specifications and guide to the use69P;A4

IEC 60759 AMD 1-1991 半导体X射线能谱仪的标准试验程序.第1次修改Standard test procedures for semiconductor X-ray energy spectrometers; amendment 14P;A4

IEC 60759-1983 半导体x射线能谱仪的标准试验程序Standard test procedures for semiconductor X-ray energy spectrometers97P;A4

IEC 60760 AMD 1-1993 第1次修改Flat, quick-connect terminations; amendment 115P;A4

IEC 60760-1989 扁平快速连接线端子Flat, quick-connect terminations59P;A4

（186） 351

IEC标准目录


开本页数

IEC 60761-1-2002 气态排出流放射性连续监视设备.第1部分:一般要求Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 1: Generalrequirements63P;A4

IEC 60761-2-2002气态排出流放射性连续监视设备.第2部分:包括铀后气溶胶

的放射性气溶胶监视设备的特殊要求

Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 2: Specificrequirements for radioactive aerosol monitors including transuranic aerosols47P;A4

IEC 60761-3-2002气态排出流放射性连续监视设备.第3部分:惰性气体排出流

监视仪的特殊要求

Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 3: Specificrequirements for radioactive noble gas monitors39P;A4

IEC 60761-4-2002气态排出流放射性连续监视设备.第4部分:碘监视仪的特殊

要求

Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 4: Specificrequirements for radioactive iodine monitors31P;A4

IEC 60761-5-2002气态排出流放射性连续监视设备.第5部分:氚监视仪的特殊

要求

Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 5: Specificrequirements for tritium monitors35P;A4

IEC 60763-1-1983 层压板规范.第1部分:层压板规范Specification for laminated pressboard. Part 1 : Specification for laminated pressboard9P;A4

IEC 60763-2-1991 层压板规范.第2部分:试验方法Specification for laminated pressboard; part 2: methods of test35P;A4

IEC 60763-3-1-1992层压板规范.第3部分:各种材料规范.活页1:预压层压板规范.型号LB 3.1.1,3.1.2,3.3.1和3.3.2

Specification for laminated pressboard; part 3: specification for individual materials; sheet 1:specifications for laminated precompressed board; types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.29P;A4

IEC 60767-1983 B型12.65mm(0.5in)磁带螺旋扫描盒式磁带录像系统Helical-scan video tape cassette system using 12.65 mm (0,5 in) magnetic tape on type betaformat

IEC 60768-1983 轻水核反应堆在正常运行和事故情况下的过程流辐射监视设备

Process stream radiation monitoring equipment in light water nuclear reactors for normaloperating and incident conditions19P;A4

IEC 60770-1-1999 用于工业处理控制系统的发射机.第1部分:性能评估方法Transmitters for use in industrial-process control systems - Part 1: Methods for performanceevaluation37P;A4

IEC 60770-2-2003 工业过程控制系统用变送器.第2部分:检验和常规试验方法Transmitters for use in industrial-process control systems - Part 2: Methods for inspection androutine testing18P;A4

IEC 60772-1983 核电站外壳结构的电气穿入件Electrical penetration assemblies in containment structures for nuclear power generating stations33P;A4

IEC 60773-1983 测量电刷运行特性的试验方法和设备Test methods and apparatus for the measurement of the operational characteristics of brushes59P;A4

IEC 60774-1-1994VHS型12.65mm(0.5in)磁带螺旋扫描盒式磁带录像系统;第1部分:VHS和袖珍VHS盒式录像带系统

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS;part 1: VHS and compact VHS video cassette system83P;A4

（187） 351

IEC标准目录


开本页数

IEC 60774-2-1999使用VHS型12.65mm(0.5in)磁带的螺旋扫描盒式录像带系

统.第2部分:调频录音

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS -Part 2: FM audio recording21P;A4

IEC 60774-3-1993VHS型12.65mm(0.5in)磁带螺旋扫描盒式磁带录像系统.第3部分:S-VHS

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS;part 3: S-VHS35P;A4

IEC 60774-4-2002利用VHS型12.65mm(0.5in)磁带螺旋扫描盒式磁带录像系

统.第4部分:S-VHS 视频卡式录音带系统.ET模式

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS -Part 4: S-VHS video cassette system; ET mode10P;A4

IEC 60775-1983 CAMAC用实时BASICReal-time BASIC for CAMAC37P;A4

IEC 60776-1983 逻辑分析仪性能的表示法Expression of the properties of logic analysers33P;A4

IEC 60777-1983 辐射防护用量和单位的一般术语Terminology, quantities and units concerning radiation25P;A4

IEC 60779-1983 电渣重熔炉的试验方法Test methods for electro-slag remelting furnaces16P;A4

IEC 60780-1998 核电厂.安全系统的电气设备.鉴定Nuclear power plants - Electrical equipment of the safety system - Qualification59P;A4

IEC 60781-1989 在低压径向配电制中短路电流计算的应用指南Application guide for calculation of short-circuit currents in low-voltage radial systems57P;A4

IEC 60787 AMD 1-1985 变压器电流回路用高压熔断器的熔丝选择指南 Application guide for the selection of fuse-links of high-voltage fuses for transformer circuit

IEC 60787-1983 变压器电路用高压熔断器熔断体选择的应用导则Application guide for the selection of fuse-links of high-voltage fuses for transformer circuitapplications

IEC 60788-1984 医疗放射技术.术语Medical radiology - Terminology112P;A4

IEC 60789-1992 放射性核素成象装置的特殊和试验条件.安格型γ射线照相

机

Characteristics and test conditions of radionuclide imaging devices; Anger type gamma cameras34P;A4

IEC 60793-1-1-2002 光纤.第1-1部分:测量方法和试验规程.总则和指南Optical fibres - Part 1-1: Measurement methods and test procedures; General and guidance25P;A4

IEC 60793-1-20-2001 光学纤维.第1-20部分:测量方法和试验规程.纤维几何Optical fibres - Part 1-20: Measurement methods and test procedures; Fibre geometry53P;A4

IEC 60793-1-21-2001 光学纤维.第1-21部分:测量方法和试验规程.覆层几何Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry29P;A4

IEC 60793-1-22-2001 光学纤维.第1-22部分:测量方法和试验规程.长度测量Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement61P;A4

IEC 60793-1-30-2001 光学纤维.第1-30部分:测量方法和试验规程.纤维验证试验Optical fibres - Part 1-30: Measurement methods and test procedures; Fibre proof test21P;A4

IEC 60793-1-31-2001 光学纤维.第1-31部分:测量方法和试验规程.抗拉强度Optical fibres - Part 1-31: Measurement methods and test procedures; Tensile strength11P;A4

（188） 351

IEC标准目录


开本页数

IEC 60793-1-32-2001 光学纤维.第1-32部分:测量方法和试验规程.覆层可剥离性Optical fibres - Part 1-32: Measurement methods and test procedures; Coating strippability21P;A4

IEC 60793-1-33-2001 光学纤维.第1-33部分:测量方法和试验规程.应力腐蚀性Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosionsusceptibility

IEC 60793-1-34-2001 光学纤维.第1-34部分:测量方法和试验规程.纤维卷曲Optical fibres - Part 1-34: Measurement methods and test procedures; Fibre curl27P;A4

IEC 60793-1-40-2001 光学纤维.第1-40部分:测量方法和试验规程.衰减Optical fibres - Part 1-40: Measurement methods and test procedures; Attenuation57P;A4

IEC 60793-1-41-2001 光学纤维.第1-41部分:测量方法和试验规程.频带宽度Optical fibres - Part 1-41: Measurement methods and test procedures; Bandwidth25P;A4

IEC 60793-1-42-2001 光学纤维.第1-42部分:测量方法和试验规程.色散Optical fibres - Part 1-42: Measurement methods and test procedures; Chromatic dispersion65P;A4

IEC 60793-1-43-2001 光学纤维.第1-43部分:测量方法和试验规程.数值孔径Optical fibres - Part 1-43: Measurement methods and test procedures; Numerical aperture25P;A4

IEC 60793-1-44-2001 光学纤维.第1-44部分:测量方法和试验规程.截止波长Optical fibres - Part 1-44: Measurement methods and test procedures; Cut-off wavelength43P;A4

IEC 60793-1-45-2001 光学纤维.第1-45部分:测量方法和试验规程.模型场径Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter59P;A4

IEC 60793-1-46-2001光学纤维.第1-46部分:测量方法和试验规程.光透射率变化

监测

Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes inoptical transmittance23P;A4

IEC 60793-1-47-2001 光学纤维.第1-47部分:测量方法和试验规

程.MACROBENDING损耗

Optical fibres - Part 1-47: Measurement methods and test procedures; Macrobending loss15P;A4

IEC 60793-1-49-2003 手持式电动工具的安全.第2-21部分:雨水清洁器的特殊要

求

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for draincleaners

IEC 60793-1-50-2001 光学纤维.第1-50部分:测量方法和试验规程.湿热(稳态)Optical fibres - Part 1-50: Measurement methods and test procedures; Damp heat (steady state)17P;A4

IEC 60793-1-51-2001 光学纤维.第1-51部分:测量方法和试验规程.干热Optical fibres - Part 1-51: Measurement methods and test procedures; Dry heat17P;A4

IEC 60793-1-52-2001 光学纤维.第1-52部分:测量方法和试验规程.温度的变化Optical fibres - Part 1-52: Measurement methods and test procedures; Change of temperature17P;A4

IEC 60793-1-53-2001 光学纤维.第1-53部分:测量方法和试验规程.浸水Optical fibres - Part 1-53: Measurement methods and test procedures; Water immersion15P;A4

IEC 60793-2-10-2002 光纤.第2-10部分:产品规范.A1类多模光纤分规范Optical fibres - Part 2-10: Product specifications; Sectional specification for category A1multimode fibres43P;A4

IEC 60793-2-20-2001 纤维光学.第2-20部分:产品规范.A2类多模光纤分规范Optical fibres - Part 2-20: Product specifications; Sectional specification for category A2multimode fibres21P;A4

（189） 351

IEC标准目录


开本页数



IEC 60793-2-50-2002 纤维光学.第2-50部分:产品规范.B级单模光纤分规范Optical fibres - Part 2-50: Product specifications; Sectional specification for class B single-modefibres

IEC 60794-1-1-2001 光缆.第1-1部分:通用规范.总则Optical fibre cables - Part 1-1: Generic specification; General65P;A4

IEC 60794-1-2 AMD 1-2002 光学纤维电缆.第1-2部分:总规范.光缆基本试验程序.修改

件1

Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures;Amendment 1

IEC 60794-1-2-1999 光缆.第1-2部分:总规范.基本光缆试验过程Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures155P;A4

IEC 60794-2-10-2003光纤电缆.第2-10部分:室内光缆.单股光缆和双股光缆的类

规范

Optical fibre cables - Part 2-10: Indoor optical fibre cables; Family specification for simplex andduplex cables34P;A4

IEC 60794-2-2002 光缆.第2部分:室内光缆.分规范Optical fibre cables - Part 2: Indoor cables; Sectional specification17P;A4

IEC 60794-2-20-2003 光纤电缆.第2-20部分:室内光缆.多纤配电光缆的类规范Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre opticaldistribution cables38P;A4

IEC 60794-2-30-2003 光纤电缆.第2-30部分:室内光缆.光纤带状电缆类规范Optical fibre cables - Part 2-30: Indoor optical fibrea cables; Family specification for optical fibreribbon cables30P;A4

IEC 60794-3-10-2002光学纤维电缆.第3-10部分:户外电缆.管道光缆和直埋通信

光缆的系列规范

Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buriedoptical telecommunication cables29P;A4

IEC 60794-3-2001 光缆.第3部分:分规范:户外电缆Optical fibre cables - Part 3: Sectional specification; Outdoor cables59P;A4

IEC 60794-3-20-2002光缆.第3-20部分:户外电缆.自立式架空光通信电缆的系列

规范

Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supportingaerial telecommunication cables31P;A4

IEC 60794-3-30-2002光缆.第3-30部分:户外光缆.穿越湖、河的通信光缆的系列

规范

Optical fibre cables - Part 3-30: Outdoor cables; Family specification for opticaltelecommunication cables for lake and river crossings33P;A4

IEC 60794-4-1-1999 光纤电缆.第4-1部分:高电压线用空中光纤电缆 Optical fibre cables - Part 4-1: Aerial optical cables for high-voltage power lines

IEC 60795-1984 用缠绕管法评定柔软片材耐热性的试验方法

Test method for evaluating thermal endurance of flexible sheet materials using the wrapped tubemethod9P;A4

（190） 351

IEC标准目录


开本页数

IEC 60796-1-1990微处理机系统总线.8位和16位数据(多总线接口).第1部分:电气和定时特性功能描述

Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I); part 1: functional descriptionwith electrical and timing specifications111P;A4

IEC 60796-2-1990微处理机系统总线.8位和16位数据(多总线接口).第2部分:具有印刷板插头座(直接式)的系统总线配置的机械和插脚

描述

Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I); part 2: mechanical and pindescriptions for the system bus configuration, with edge connectors (direct)17P;A4

IEC 60796-3-1990微处理机系统总线:8位和16位数据(多总线接口).第3部分:具有插头座(间接式)的欧洲卡片形配置适用的机械和插脚

描述

Microprocessor system BUS I, 8-bit and 16-bit data; part 3: mechanical and pin descriptions forthe eurocard configuration with pin and socket (indirect) connectors19P;A4

IEC 60798-1984 设备电线用铜合金Copper alloy used for equipment wires.5P;A4

IEC 60799-1998 电器附件.软线组件和互联线组件Electrical accessories - Cord sets and interconnection cord sets19P;A4

IEC 60800-1992 取暖设备和防结冰用额定电压为300/500V的加热电缆Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of iceformation

IEC 60803 AMD 1-1995射频电缆和连接器用六角形和方形压接模槽、钳口、量规、外导体压接套和中心接触压接圆筒的推荐尺寸.补充件1

Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges,outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors;Amendment 1

IEC 60803-1984 射频电缆和连接器用六角形和方形压接模槽、钳口、量规、外导体压接套和中心接触压接圆筒的推荐尺寸

Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges,outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors36P;A4

IEC 60805-1985 蓄能泵和作为水泵运行的涡轮泵的试运转、运行和维护导则

Guide for commissioning, operation and maintenance of storage pumps and of pump-turbinesoperating as pumps47P;A4

IEC 60806-1984 医疗诊断用旋转阳极X射线管的大对称辐射域的测定Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube formedical diagnosis21P;A4

IEC 60807-1-1991频率低于3MHz的矩形连接器.第1部分:总规范.评定质量连

接器详细规范制订的一般要求与导则

Rectangular connectors for frequencies below 3 MHz; part 1: generic specification; generalrequirements and guide for the preparation of detail specifications for connectors with assessedquality68P;A4

IEC 60807-2 AMD 1-1996频率低于3MHz的矩形连接器.第2部分:带质量评定的带梯

形金属套和圆形接触件的连接器系列的详细规范.固定的钎

焊接型.补充件1

Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range ofconnectors, with assessed quality, with trapezoidal shaped metal shells and round contacts -Fixed solder contact types; Amendment 13P;A4

IEC 60807-2-1992频率低于3MHz的矩形连接器.第2部分:带质量评定的带梯

形金属套和圆形接触件的连接器系列的详细规范.固定的的

钎焊接型

Rectangular connectors for frequencies below 3 MHz; part 2: detail specification for a range ofconnectors, with assessed quality, with trapezoidal shaped metal shells and round contacts; fixedsolder contact types67P;A4

（191） 351

IEC标准目录


开本页数

IEC 60807-3-1990频率低于3MHz的矩形连接器.第3部分:梯形金属壳和圆触

点连接器范围的详细规范.带闭式圆筒,后插入/后抽取的可

拆卸的压扁触点型系列详细规范

Rectangular connectors for frequencies below 3 MHz; part 3: detail specification for a range ofconnectors with trapezoidal shaped metal sheels and round contacts; removable crimp contacttypes with closed crimp barrels, rear insertion/rear extraction57P;A4

IEC 60807-6-1988频率低于3MHz的矩形连接器.第6部分:一系列矩形连接器

的详细规范.连接器具有标明极性的尺寸20(7.5A)的圆触点.固定锡焊接触点形式

Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range ofrectangular connectors with size 20 (7,5A) round contacts having polarized guides - Fixed soldercontact types

IEC 60807-7-1991

频率低于3MHz的矩形连接器.第7部分:一系列矩形连接器

的详细规范:具有评定标明极性式插孔,螺纹尺寸为16(13A)圆触点的,压接圆套可拆压合触点的;可后面插入/前面拔出

的

Rectangular connectors for frequencies below 3 MHz; part 7: detail specification for a range ofconnectors with polarized guides or jackscrews and size 16 (13 A) round contacts; removablecrimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality105P;A4

IEC 60807-8-1992频率低于3MHz的矩形连接器.第8部分:电缆屏蔽用四信号

触点和接地触点连接器详细规范

Rectangular connectors for frequencies below 3 MHz; part 8: detail specification for connectors,four-signal contacts and earthing contacts for cable screen91P;A4

IEC 60807-9-1993 频率低于3MHz的矩形连接器.第9部分:环形电视连接器Rectangular connectors for frequencies below 3 MHz; part 9: detail specification for a range ofperitelevision connectors31P;A4

IEC 60808-1985 计数率表的辅助仪器.特性和试验方法Complementary instrumentation for counting ratemeters. Characteristics and test methods103P;A4

IEC 60809 AMD 1-1996 道路车辆用白热丝灯.尺寸的、电的和照明的要求.第1次修

改

Filament lamps for road vehicles - Dimensional, electrical and luminous requirements;Amendment 1

IEC 60809 AMD 2-2002 道路车辆用灯.尺寸、电和照明要求.修改2Lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 297P;A4

IEC 60809 Edition 2.2-2002 道路车辆灯.尺寸,电气和亮度要求Lamps for road vehicles - Dimensional, electrical and luminous requirements222P;A4

IEC 60809-1995 道路车辆用白炽灯.尺寸、电气和照明要求Filament lamps for road vehicles - Dimensional, electrical and luminous requirements155P;A4

IEC 60810 AMD 1-1994 道路车辆灯.性能要求.修改件1Lamps for road vehicles - Performance requirements; Amendment 130P;A4

IEC 60810 AMD 2-2001 道路车量用灯.性能要求.修改件2Lamps for road vehicles - Performance requirements; Amendment 221P;A4

IEC 60810 Edition 2.2-2002 道路车辆灯.性能要求Lamps for road vehicles - Performance requirements59P;A4

IEC 60810-1993 道路车辆灯.性能要求Lamps for road vehicles; performance requirements42P;A4

IEC 60811-1-1 AMD 1-2001电缆和光缆绝缘和护套材料通用试验方法.第1-1部分:一般

应用方法.厚度和外形尺寸的测量.机械性能测定试验.修改

件1

Common test methods for insulating and sheathing materials of electric and optical cables - Part1-1: Methods for general application; Measurement of thickness and overall dimensions; Testsfor determining the mechanical properties; Amendment 15P;A4

（192） 351

IEC标准目录


开本页数

IEC 60811-1-1 Edition 2.1-2001电缆和光缆的绝缘和护套材料通用试验方法.第1-1部分:一般应用方法.厚度和总尺寸的测量.机械性能测定试验

Common test methods for insulating and sheathing materials of electric cables and optical cables- Part 1-1: Methods for general application; Measurement of thickness and overall dimensions;Tests for determining the mechanical properties45P;A4

IEC 60811-1-1-1993电缆绝缘和护套材料的通用试验方法.第1部分:一般应用方

法.第1节:厚度和外形尺寸的测量.机械性能测定试验

Common test methods for insulating and sheathing materials of electric cables; part 1: methodsfor general application; section 1: measurement of thickness and overall dimensions; tests fordetermining the mechanical properties39P;A4

IEC 60811-1-2 AMD 1-1989电缆用绝缘和护套材料的一般检验方法.第1部分:一般应用

方法.第2节:热老化法.IEC 60811-1-2-85的修改件1

Common test methods for insulating and sheathing materials of electric cables; part 1: methodsfor general application; section two: thermal ageing methods; amendment No. 1 to IEC 60811-1-2:1985

IEC 60811-1-2 AMD 2-2000电缆和光缆用绝缘和护套材料的一般检验方法.第1-2部分:一般应用方法.热老化法.修改件2

Common tests methods for insulating and sheathing materials of electric and optical cables - Part1-2: Methods for general application; Thermal ageing methods; Amendment 211P;A4

IEC 60811-1-2-1985电缆绝缘和护套材料通用试验方法.第1部分:一般应用方法.第2节:热老化方法

Common test methods for insulating and sheathing materials of electric cables; part 1: methodsfor general application; section two: thermal ageing methods21P;A4

IEC 60811-1-3 AMD 1-2001电缆绝缘和护套材料通用试验方法.第1-3部分:一般应用方

法.密度测定方法.吸水试验.收缩试验.修改件1

Common test methods for insulating and sheathing materials of electric and optical cables - Part1-3: General application - Methods for determining the density; Water absorption tests; Shrinkagetest; Amendment 17P;A4

IEC 60811-1-3 Edition 2.1-2001电缆和光缆的绝缘和护套材料通用试验方法.第1-3部分:一般应用.密度测定方法.吸水试验.收缩试验

Common test methods for insulating and sheathing materials of electric and optical cables - Part1-3: General application; Methods for determining the density; Water absorption tests; Shrinkagetest

IEC 60811-1-4 AMD 1-1993电缆绝缘护套材料的通用试验方法.第1部分:一般应用方法.第4节:低温试验.第2次修改

Common test methods for insulating and sheathing materials of electric cables; part 1: methodsfor general application; section 4: test at low temperature; amendment 13P;A4

IEC 60811-1-4 AMD 2-2001电缆和光缆的绝缘和护套材料通用试验方法.第1-4部分:一般应用方法.低温试验.修改件2

Common test methods for insulating and sheathing materials of electric and optical cables - Part1-4: Methods for general application; Test at low temperature; Amendment 25P;A4

IEC 60811-1-4-1985电缆绝缘和护套材料通用试验方法.第1部分:一般应用方法.第4节:低温试验

Common test methods for insulating and sheathing materials of electric cables. Part 1 : Methodsfor general application. Section Four - Tests at low temperature27P;A4

IEC 60811-2-1 AMD 1-2001电缆和光缆的绝缘和护套材料通用试验方法.第2-1部分:弹性体所用特定方法.臭氧抗性,热固和矿物油浸试验.修改件1

Common test methods for insulating and sheathing materials of electric and optical cables - Part2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oilimmersion tests; Amendment 17P;A4

（193） 351

IEC标准目录


开本页数

IEC 60811-2-1 Edition 2.1-2001电缆和光缆用绝缘和屏蔽材料的共同试验方法.第2-1部分:弹性体所用特定方法.臭氧抗性、热固和矿物油浸试验

Common test methods for insulating and sheathing materials of electric and optical cables - Part2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oilimmersion tests23P;A4

IEC 60811-2-1-1998电缆和光缆用绝缘和屏蔽材料.一般试验方法.第2-1部分:弹性体所用特定方法.臭氧抗性,热固和矿物油浸试验

Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oilimmersion tests21P;A4

IEC 60811-3-1 AMD 1-1994电缆绝缘和护套材料通用试验方法.第3部分:聚氯乙烯专用

方法.第1节:高温下压力试验.耐裂性试验.第1次修改

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methodsspecific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistanceto cracking; Amendment 13P;A4

IEC 60811-3-1 AMD 2-2001电缆绝缘和护套材料通用试验方法.第3-1部分:聚氯乙烯专

用方法.高温下压力试验.耐裂性试验.修改件2

Common test methods for insulating and sheathing materials of electric and optical cables - Part3-1: Methods specific to PVC compounds - Pressure test at high temperature; Tests forresistance to cracking; Amendment 27P;A4

IEC 60811-3-1-1985电缆绝缘和护套材料通用试验方法.第3部分:聚氯乙烯专用

方法.第1节:高温下压力试验.耐裂性试验

Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methodsspecific to PVC compounds. Section One : Pressure test at high temperature - Tests forresistance to cracking25P;A4

IEC 60811-3-2 AMD 1-1993电缆绝缘和护套材料通用试验方法.第3部分:聚氯乙烯专用

方法.第2节:质量损失试验.热稳定性试验.第1次修改

Common test methods for insulating and sheathing materials of electric cables; part 3: methodsspecific to PVC compounds; section 2: loss of mass test; thermal stability test; amendment 15P;A4

IEC 60811-3-2-1985电缆绝缘和护套材料通用试验方法.第3部分:聚氯乙烯专用

方法.第2节:质量损失试验.热稳定性试验

Common test methods for insulating and sheathing materials of electric cables. Part 3 : Methodsspecific to PVC compounds. Section Two : Loss of mass test - Thermal stability test21P;A4

IEC 60811-4-1 AMD 2-1993

电缆绝缘和护套材料通用试验方法.第4部分:聚氯乙烯和聚

丙烯专用方法.第1节:耐环境应力破裂性.在空气中热老化后

的卷绕试验.熔体流动指数测量.聚乙烯中炭黑和(或)矿物质

含量的测定(第二次修改)

Common test methods for insulating and sheathing materials of electric cables; part 4: methodsspecific to polyethylene and polypropylene compounds; section 1: resistance to environmentalstress cracking; wrapping test after thermal ageing in air; measurement of the melt flow index;carbon black and/or mineral content measurement in PE; amendment 25P;A4

IEC 60811-4-1-1985电缆绝缘护套材料的通用试验方法.第4部分:聚乙烯和聚丙

烯专用方法.第1节:耐环境应力破裂性.在空气中热老化后的

卷绕试验.熔体流动指数测量.聚乙烯中炭黑和(或)矿物质含

37P;A4

IEC 60811-4-2-1990

电缆绝缘护套材料的通用试验方法.第4部分:聚乙烯与聚丙

烯复合物专用方法.第2节:预处理后的断裂伸长率、预处理

后的翘曲试验、在空气中热老化后的翘曲试验、增加量测量、长期稳定性试验(附录A);铜催化氧化解除作用试验方

法(附录B)

Common test methods for insulating and sheathing materials of electric cables; part 4: methodsspecific to polyethylene and polypropylene compounds; section two: elongation at break afterpre-conditioning; wrapping test after pre-conditioning; wrapping test after thermal ageing in air;measurement of mass increase; long-term stability test (appendix A); test method for copper-catalysed oxidative degradation (appendix B) 34P;A4

（194） 351

IEC标准目录


开本页数

IEC 60811-5-1-1990

电缆绝缘和护套材料的通用试验方法.第5部分:填充复合物

的专用方法.第1节:滴点、油分离、较低温脆性、总酸值、

无腐蚀性成分.在23时的电容率、在23和100时的直

流电阻率

Common test methods for insulating and sheathing materials of electric cables; part 5: methodsspecific to filling compounds; section one: drop point; separation of oil; lower temperaturebrittleness; total acid number; absence of corrosive components; permittivity at 23 鳦; d.c.resistivity at 23 鳦 and 100 鳦

IEC 60812-1985 系统可靠性分析技术.失效模式和效应分析(FMEA)程序Analysis techniques for system reliability - Procedure for failure mode and effects analysis(FMEA)

IEC 60814-1997绝缘液体.含油纸和纸板.用卡尔·费歇尔自动电量滴定法测

定水的含量

Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automaticcoulometric Karl Fischer titration43P;A4

IEC 60819-1 AMD 1-1996 电工用非纤维素纸.第1部分:定义和一般要求.补充件1Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements;Amendment 13P;A4

IEC 60819-1-1995 电工用非纤维素纸.第1部分:定义和一般要求Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements9P;A4

IEC 60819-2-2001 电工用非纤维素纸.第2部分:试验方法Non-cellulosic papers for electrical purposes - Part 2: Methods of test25P;A4

IEC 60819-3-1-2001电工用非纤维素纸.第3部分:单项材料规范.第1活页:填充玻

璃砂纸

Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials;Sheet 1: Filled glass paper9P;A4

IEC 60819-3-2-2001电工用非纤维素纸.第3部分:单项材料规范.第2活页:混合无

机-有机纸

Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials;Sheet 2: Hybrid inorganic-organic paper9P;A4

IEC 60819-3-3-1991电工用非纤维素纸规范.第3部分:各种材料规范.第3活页:未添加聚芳基酰胺(芳族聚酰胺)纸

Specification for non-cellulosic papers for electrical purposes; part 3: specifications for individualmaterials; sheet 3: unfilled aramid (aromatic polyamide) papers11P;A4

IEC 60819-3-4-2001电工用非纤维素纸.第3部分:单项材料规范.第4活页:含不超

过50%的云母粒子的芳香族纤维素纸

Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials;Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles11P;A4

IEC 60821 AMD 1-1999 YME总线.1字节至4字节数据的微处理系统.补充件1 VMEbus - Microprocessor system bus for 1 byte to 4 byte data; Amendment 1

IEC 60821-1991 IEC 60821-VME总线:1比特到4比特数据微处理器系统总

线

IEC 60821-VMEbus; microprocessor system bus for 1 byte to 4 byte data475P;A4

IEC 60822-1988 IEC 822 VSB.IEC 60821VME总线的平行分系统总线IEC 60822 VSB; parallel sub-system bus of the IEC 60821 VMEbus311P;A4

IEC 60823-1990 微处理机系统总线(VMS总线).IEC 60821总线的子系统串

联总线

Microprocessor system bus (VMSbus); serial sub-system bus of the IEC 60821 bus (VMEbus)319P;A4

IEC 60824-1988 微处理机.术语 Terminology related to microprocessors

IEC 60825-1 AMD 1-1997激光设备的安全.第1部分:设备分类、要求和用户指南.修改

件1

Safety of laser products - Part 1: Equipment classification, requirements and user`s guide;Amendment 121P;A4

（195） 351

IEC标准目录


开本页数

IEC 60825-1 AMD 2-2001激光产品的安全.第1部分:设备分级,要求和使用者指南.修改件2

Safety of laser products - Part 1: Equipment classification, requirements and user`s guide;Amendment 268P;A4

IEC 60825-1 Edition 1.2-2001 激光产品的安全.第1部分:设备分类、要求和用户指南Safety of laser products - Part 1: Equipment classification, requirements and user`s guide115P;A4

IEC 60825-1-1993 激光产品的安全.第1部分:设备分类、要求和使用者指南Safety of laser products; part 1: equipment classification, requirements and user`s guide207P;A4

IEC 60825-2-2000 激光产品的安全.第2部分:光纤通信系统的安全性Safety of laser products - Part 2: Safety of optical fibre communication systems37P;A4

IEC 60825-4 AMD 1-2002 激光产品的安全.第4部分:激光防护器.修改件1Safety of laser products - Part 4: Laser guards; Amendment 14P;A4

IEC 60825-4-1997 激光产品的安全.第4部分:激光监视器Safety of laser products - Part 4: Laser guards22P;A4

IEC 60830-1987 用作多路定标器的多通道分析器的试验方法 Test methods for multichannel analyzers as multichannel scalers.

IEC 60831-1 AMD 1-2002额定电压1000V及以下交流系统用自愈式并联电力电容器.第1部分:总则.性能,试验和定额.安全要求.安装及运行导则.修改件1

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to andincluding 1 000 V - Part 1: General; Performance, testing and rating; Safety requirements; Guidefor installation and operation; Amendment 15P;A4

IEC 60831-1 Edition 2.1-2002额定电压1000V及以下交流系统用自愈式并联电力电容器.第1部分:总则.性能、试验和定额.安全要求.安装及操作指

南

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to andincluding 1000 V - Part 1: General; Performance, testing and rating; Safety requirements; Guidefor installation and operation71P;A4

IEC 60831-1-1996额定电压小于交流1000v(含1000v)的自恢复型旁路电容器.第1部分:概述.性能,试验,额定值.安全要求.安装及运行导则

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to andincluding 1000 V - Part 1: General - Performance, testing and rating - Safety requirements -Guide for installation and operation68P;A4

IEC 60831-2-1995额定电压在1000v以下含1000V的交流自恢复型旁路电容

器.第2部分:老化试验、自恢复试验和破坏性试验

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to andincluding 1000 V - Part 2: Ageing test, self-healing test and destruction test21P;A4

IEC 60832-1988 带电作业用绝缘棒及万能工具配件 Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working

IEC 60833-1987 工频电场测定Measurement of power-frequency electric fields45P;A4

IEC 60834-1-1999 电力系统遥护设备.性能和试验.第1部分:指令系统Teleprotection equipment of power systems - Performance and testing - Part 1: Commandsystems

IEC 60834-2-1993 电力系统遥护设备的性能和试验.第2部分:模拟比较系统Performance and testing of teleprotection equipment of power systems; part 2: analoguecomparison systems77P;A4

（196） 351

IEC标准目录


开本页数

IEC 60835-1-1-1990数字微波无线电发射系统使用设备的测量方法.第1部分:地面无线电中继系统的测量.第1节:总则

Methods of measurement for equipment used in digital microwave radio transmission systems;part 1: measurements common to terrestrial radio-relay systems and satellite earth stations;section one: general33P;A4

IEC 60835-1-2 AMD 1-1995数字微波无线电发射系统使用设备的测量方法.第1部分:卫星地面站和地面无线电中继系统的测量方法.第2节:基本特

性.第1次修改

Methods of measurement for equipment used in digital microwave transmission systems - Part 1:Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2:Basic characteristics; Amendment 123P;A4

IEC 60835-1-2-1992数字微波无线电发射系统使用设备的测量方法.第1部分:卫星地面站和地面无线电中继系统的测量.第2节:基本特性

Methods of measurement for equipment used in digital microwave radio transmission systems;part 1: measurements common to terrestrial radio-relay systems and satellite earth stations;section 2: basic characteristics37P;A4

IEC 60835-1-3 AMD 1-1995数字微波无线电传榆系统使用设备的测量方法.第1部分:地面无线电中继系统和卫星地面站的测量方法.第3节:传输特

性.第1次修改

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -Section 3: Transmission characteristics; Amendment 115P;A4

IEC 60835-1-3-1992数字微波无线电发射系统使用设备的测量方法.第1部分:地面无线电中继系统和卫星地面站的测量.第3节:传输特性

Methods of measurement for equipment used in digital microwave radio transmission systems;part 1: measurements common to terrestrial radio-relay systems and satellite earth stations;section 3: transmission characteristics33P;A4

IEC 60835-1-4 AMD 1-1995数字微波无线电发射系统使用设备的测量方法.第1部分:卫星地面站和地面无线电中继系统的测量方法.第4节:发射性

能.第1次修改

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -Section 4: Transmission performance; Amendment 15P;A4

IEC 60835-1-4-1992数字微波无线电发射系统使用设备的测量方法.第1部分:卫星地面站和地面无线电中继系统的测量.第4节:发射性能

Methods of measurement for equipment used in digital microwave radio transmission systems;part 1: measurements common to terrestrial radio-relay systems and satellite earth stations;section 4: transmission performance25P;A4

IEC 60835-2-10-1992数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第10节:系统总性能

Methods of measurement for equipment used in digital microwave radio transmission systems;part 2: measurements on terrestrial radio-relay systems; section 10: overall system performance19P;A4

IEC 60835-2-11-1996数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第11节:+交叉极化擀扰消除器

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 2: Measurements on terrestrial radio-relay systems - Section 11: Cross-polarizationinterference canceller39P;A4

IEC 60835-2-1-1990数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第1节:总则

Methods of measurement for equipment used in digital microwave radio transmission systems;part 2: measurements on terrestrial radio-relay systems; section one: general5P;A4

（197） 351

IEC标准目录


开本页数

IEC 60835-2-2-1994数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第2节:天线

Methods of measurement for equipment used in digital microwave transmission systems - Part 2:Measurements on terrestrial radio-relay systems - Section 2: Antenna43P;A4

IEC 60835-2-3-1992数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第3节:RF分支网络

Methods of measurement for equipment used in digital microwave radio transmission systems;part 2: measurements on terrestrial radio-relay systems; section 3: RF branching networks14P;A4

IEC 60835-2-4 AMD 1-1997数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第4节:发射机/接收包括调制器解

调器.修改件1

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiverincluding modulator/demodulator; Amendment 111P;A4

IEC 60835-2-4 Edition 1.1-1998数字微波无线电传输系统使用设备的测量方法.第2-4部分:地面无线电中继系统的测量.包括调制器/解调器的发射机/接收机

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 2-4: Measurements on terrestrial radio-relay systems; Transmitter/receiver includingmodulator/demodulator60P;A4

IEC 60835-2-4-1993数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第4节:发射机/接收包括调制器解

调器

Methods of measurement for equipment used in digital microwave radio transmission systems;part 2: measurements on terrestrial radio-relay systems; section 4: transmitter/receiver includingmodulator/demodulator41P;A4

IEC 60835-2-5-1993数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第5节:数字信号处理子系统

Methods of measurement for equipment used in digital microwave radio transmission systems;part 2: measurements on terrestrial radio-relay systems; section 5: digital signal processing sub-system

IEC 60835-2-6-1995数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量方法.第6节:保护开关

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching39P;A4

IEC 60835-2-7-1994数字微波无线电传输系统设备的测量方法.第2部分:地面无

线电中继系统的测量.第7节:开关变换设备

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching andcombining equipment51P;A4

IEC 60835-2-8 AMD 1-1996数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第8节:适配补偿器.补充件1

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer;Amendment 1

IEC 60835-2-8-1993数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第8节:适配补偿器

Methods of measurement for equipment used in digital microwave radio transmission systems;part 2: measurements on terrestrial radio-relay systems; section 8: adaptive equalizer37P;A4

IEC 60835-2-9-1995数字微波无线电发射系统使用设备的测量方法.第2部分:地面无线电中继系统的测量.第9节:业务波道

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels35P;A4

（198） 351

IEC标准目录


开本页数

IEC 60835-3-10-1994数字微波无线电传输系统设备的测量方法.第3部分:卫星地

面站测量方法.第10节:终端设备-TDMA通信地面站

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA trafficearth station35P;A4


面站测量方法.第11节:SCPC-PSK传输信道装置

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment forSCPC-PSK transmission11P;A4

IEC 60835-3-1-1990数字微波无线电发射系统使用设备的测量方法.第3部分:卫星地面站的测量.第1节:总则

Methods of measurement for equipment used in digital microwave radio transmission systems;part 3: measurements on satellite earth stations; section one: general5P;A4

IEC 60835-3-12-1993数字微波无线电发射系统使用设备的测量方法.第3部分:卫星地面站的测量.第12节:总系统的性能

Methods of measurement for equipment used in digital microwave radio transmission systems;part 3: measurements on satellite earth stations; section 12: overall system performance7P;A4

IEC 60835-3-13-1996数字微波无线电发射系统使用设备的测量方法.第3部分:地球卫星接收站的测量.第13节:VSAT系统

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 3: Measurements on satellite earth stations - Section 13: VSAT systems41P;A4

IEC 60835-3-14-1996数字微波无线电发射系统使用设备的测量方法.第3部分:地球卫星接收站的测量.第14节:卫星新闻采访用地面站

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 3: Measurements on satellite earth stations - Section 14: Earth stations for satellite newsgathering (SNG)21P;A4

IEC 60835-3-2-1995数字微波无线电发射系统使用设备的测量方法.第3部分:卫星地面站的测量.第2节:天线

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 3: Measurements on satellite earth stations - Section 2: Antenna105P;A4

IEC 60835-3-4-1993数字微波无线电发射系统使用设备的测量方法.第3部分:卫星地面站的测量.第4节:低噪声放大器

Methods of measurement for equipment used in digital microwave radio transmission systems;part 3: measurements on satellite earth stations; section 4: low noise amplifier13P;A4

IEC 60835-3-5-1994数字微波无线电发射系统使用设备的测量方法.第3部分:卫星地面站的测量.第5节:上变频器和下变频器

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 3: Measurement on satellite earth stations - Section 5: Up- and down-converters35P;A4

IEC 60835-3-6-1996数字微波无线电发射系统使用设备的测量方法.第3部分:地球卫星接收站的测量.第6节:大功率放大器

Methods of measurement for equipment used in digital microwave transmission systems - Part 3:Measurements on satellite earth stations - Section 6: High-power amplifiers23P;A4


面站测量方法.第7节:接收系统质量因数

Methods of measurement for equipment used in digital microwave radio transmission systems -Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system41P;A4

IEC 60835-3-9-1993数字微波无线电发射系统使用设备的测量方法.第3部分:人造卫星地面站的测量.第9节:CSP-PSK终端设备

Methods of measurement for equipment used in digital microwave radio transmission systems;part 3: measurements on satellite earth stations; section 9: terminal equipment SCP-PSK51P;A4

（199） 351

IEC标准目录


开本页数

IEC 60836-1988 电气设备用硅酮液体的规范Specifications for silicone liquids for electrical purposes28P;A4

IEC 60838-1 AMD 1-1999 各式灯座.第1部分:总要求和试验.修改件1Miscellaneous lampholders - Part 1: General requirements and tests; Amendment 17P;A4

IEC 60838-1 AMD 2-2002 杂类灯座.第1部分:一般要求和试验.修改件2Miscellaneous lampholders - Part 1: General requirements and tests; Amendment 25P;A4

IEC 60838-1-1997 各式灯座.第1部分:总要求和试验Miscellaneous lampholders - Part 1: General requirements and tests56P;A4

IEC 60838-2-1 AMD 1-1998 各式灯座.第2部分:特殊要求.第1节:S14型灯座.补充件1Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14;Amendment 13P;A4

IEC 60838-2-1-1994 各式灯座.第2部分:特殊要求.第1节:S14灯座Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S1415P;A4

IEC 60839-10-1-1995 警报系统.第10部分:道路车辆用警报系统.第1节:客车Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars55P;A4

IEC 60839-1-1-1988 警报系统.第1部分:一般要求.第1节:总则Alarm systems; part 1: general requirements; section one: general25P;A4

IEC 60839-1-2-1987 报警系统.第1部分:一般要求.第2节:电源设备、试验方法和

性能规范

Alarm systems. Part 1: General requirements. Section Two - Power units, test methods andperformance criteria.

IEC 60839-1-3-1988 报警系统.第1部分:一般要求.第3节:环境试验 Alarm systems. Part 1: General requirements. Section Three - Environmental testing

IEC 60839-1-4-1989 警报系统.第1部分:一般要求.第4节:实用规程Alarm systems; part 1: general requirements; section four; code of practice29P;A4

IEC 60839-2-2-1987 警报系统.第2部分:闯入者报警系统的要求.第2节:探测器的

一般要求

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Two - Requirements fordetectors - General.

IEC 60839-2-3-1987报警系统.第2部分:闯入者报警系统的要求.第3节:建筑物内

红外光束中断探测器的要求

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Three - Requirementsfor infrared-beam interruption dectors in buildings13P;A4

IEC 60839-2-4-1990警报系统.第2部分:闯入者报警系统的要求.第4节:建筑物内

使用的超声波多普勒探测器

Alarm systems; part 2: requirements for intruder alarm systems; section 4: ultrasonic dopplerdetectors for use in buildings19P;A4

IEC 60839-2-5-1990警报系统.第2部分:闯入者报警系统的要求.第5节:建筑物内

使用的微波多普勒探测器

Alarm systems; part 2: requirements for intruder alarm systems; section 5: microwave dopplerdetectors for use in buildings19P;A4

IEC 60839-2-6-1990警报系统.第2部分:闯入者报警系统的要求.第6节:建筑物使

用的无源红外探测器

Alarm systems; part 2: requirements for intruder alarm systems; section six: passive infra-reddetectors for use in buildings23P;A4

IEC 60839-2-7-1994报警系统.第2部分:闯入者报警系统的要求.第7节:建筑物使

用的玻璃断口状通过探测器

Alarm systems - Part 2: Requirements for intruder alarm systems; section 7: Passive glass-breakdetectors for use in buildings35P;A4

（200） 351

IEC标准目录


开本页数

IEC 60839-5-1-1991警报系统.第5部分:警报传输系统要求.第1节:系统的一般要

求

Alarm systems; part 5: requirements for alarm transmission systems; section 1: generalrequirements for systems31P;A4

IEC 60839-5-2-1991警报系统.第5部分:警报传输系统要求.第2节:设备的一般要

求

Alarm systems; part 5: requirements for alarm transmission systems; section 2: generalrequirements for equipment25P;A4

IEC 60839-5-4-1991警报系统.第5部分:警报传输系统要求.第4节:利用专用警报

传输通路的警报传输系统

Alarm systems; part 5: requirements for alarm transmission systems; section 4: alarmtransmission systems using dedicated alarm transmission paths13P;A4

IEC 60839-5-5-1991警报系统.第5部分:警报传输系统要求.第5节:利用公用电话

交换网络的数字报知器系统的要求

Alarm systems; part 5: requirements for alarm transmission systems; section 5: requirements fordigital communicator systems using the public switched telephone network17P;A4

IEC 60839-5-6-1991警报系统.第5部分:警报传输系统要求.第6节:利用公用电话

交换网络的发话报知器系统的要求

Alarm systems; part 5: requirements for alarm transmission systems; section 6: requirements forvoice communicator systems using the public switched telephone network15P;A4

IEC 60839-7-11-2001警报系统.第7-11部分:警报传输系统串行数据接口的信息

格式和协议.与PSTN接口处的ITU-T推荐V.23信令数字通

信装置系统用串行协议

Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarmtransmission systems; Serial protocol for use by digital communicator systems using ITU-TRecommendation V.23 signalling at interfaces with the PSTN6P;A4

IEC 60839-7-1-2001警报系统.第7-1部分:警报传输系统串行数据接口的信息格

式和协议.总则

Alarm systems - Part 7-1: Message formats and protocols for serial data interfaces in alarmtransmission systems; General19P;A4


格式和协议.使用ITU-T推荐V.23信令的专用通信信道的

PTT接口

Alarm systems - Part 7-12: Message formats and protocols for serial data interfaces in alarmtransmission systems; PTT interfaces for dedicated communications channels using ITU-TRecommendation V.23 signalling6P;A4


格式和协议.使用ITU-T推荐V.24/V.28信令的终端接口

Alarm systems - Part 7-20: Message formats and protocols for serial data interfaces in alarmtransmission systems; Terminal interfaces employing ITU-T recommendation V.24/V.28signalling


式和协议.公共应用层协议

Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarmtransmission systems; Common application layer protocol27P;A4


式和协议.公共数据链接层协议

Alarm systems - Part 7-3: Message formats and protocols for serial data interfaces in alarmtransmission systems; Common data link layer protocol14P;A4


式和协议.公共传输层协议

Alarm systems - Part 7-4: Message formats and protocols for serial data interfaces in alarmtransmission systems; Common transport layer protocol11P;A4

（201） 351

IEC标准目录


开本页数


式和协议.与ISO/IEC 8482相符的二线构型的警报系统接口

Alarm systems - Part 7-5: Message formats and protocols for serial data interfaces in alarmtransmission systems; Alarm system interfaces employing a two-wire configuration in accordancewith ISO/IEC 84826P;A4


式和协议.利用ITU-T推荐V.24/V.28信令的警报系统接口

Alarm systems - Part 7-6: Message formats and protocols for serial data interfaces in alarmtransmission systems; Alarm system interfaces employing ITU-T Recommendation V.24/V.28signalling6P;A4


式和协议.插入式无线电收发机用警报系统接口

Alarm systems - Part 7-7: Message formats and protocols for serial data interfaces in alarmtransmission systems; Alarm system interfaces for plug-in alarm system transceivers10P;A4

IEC 60840-1999额定电压为30KV(Um=36KV)以上至150KV(Um=170KV)以下的挤压绝缘的动力电缆试验.试验方法和要求

Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U =36 kV) up to 150 kV (U = 170 kV) - Test methods and requirements69P;A4

IEC 60841-1988 录音.脉冲数调制(PCM)编码/解码系统 Audio recording - PCM encoder/decoder system.

IEC 60842-1988 氢冷式涡轮同步电机的使用与运行导则Guide for application and operation of turbine-type synchronous machines using hydrogen as acoolant.

IEC 60843-1-1993使用8mm磁带的螺旋扫描盒式磁带录像系统.8mm录像机.第1部分:一般规格

Helical-scan video tape cassette system using 8 mm magnetic tape; 8 mm video; part 1: generalspecifications111P;A4

IEC 60843-2-1992使用8mm磁带螺旋扫描盒式8mm视频系统.8mm录象机.第2部分:PCM多触点音频系统

Helical-scan video tape cassette system using 8 mm magnetic tape; 8 mm video; part 2: PCMmulti-track audio system27P;A4

IEC 60843-3-1993使用8mm磁带螺旋扫描盒式8mm视频系统.8mm录像机.第3部分:8号Hi的高频带规范

Helical-scan video tape cassette system using 8 mm magnetic tape; 8 mm video; part 3: high-band specifications for Hi 819P;A4

IEC 60843-4-2000使用8mm磁带的螺旋扫描盒式录像带系统(8mm录像).第4部分:视频二级编码(VSC)

Helical-scan video tape cassette system using 8 mm magnetic tape (8 mm video) - Part 4: Videosubcode (VSC)49P;A4

IEC 60846-2002辐射防护仪.β、X和γ照射的环境和/或定向剂量当量(率)测量仪和(或)监测仪

Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) metersand/or monitors for beta, X and gamma radiation97P;A4

IEC 60847-1988 本地网络特性 Characteristics of local area networks (LAN).

IEC 60848-2002 顺序功能表图用GRAFCET规范语言GRAFCET specification language for sequential function charts101P;A4

IEC 60849-1998 备用音响系统Sound systems for emergency purposes43P;A4

IEC 60850-2000 铁路应用.牵引装置的供电 Railway applications - Supply voltages of traction systems

IEC 60851-1-1996 绕组线.试验方法.第1部分:总则Winding wires - Test methods - Part 1: General19P;A4

（202） 351

IEC标准目录


开本页数

IEC 60851-2 AMD 1-1997 绕组线试验方法.第2部分:尺寸的确定.补充件1Winding wires - Test methods - Part 2: Determination of dimensions; Amendment 15P;A4

IEC 60851-2 Edition 2.1-1997 绕组线.试验方法.第2部分:尺寸的测定Winding wires - Test methods - Part 2: Determination of dimensions28P;A4

IEC 60851-2-1996 绕组线.试验方法.第2部分:尺寸的测定Winding wires - Test methods - Part 2: Determination of dimensions14P;A4

IEC 60851-3 AMD 1-1997 绕组线试验方法.第3部分:机械性能.补充件1Winding wires - Test methods - Part 3: Mechanical properties; Amendment 123P;A4

IEC 60851-3 Edition 2.1-1997 绕组线.试验方法.第3部分:机械性能Winding wires - Test methods - Part 3: Mechanical properties83P;A4

IEC 60851-3-1996 绕组线试验方法.第3部分:机械性能Winding wires - Test methods - Part 3: Mechanical properties51P;A4

IEC 60851-4 AMD 1-1997 绕组线.试验方法.第4部分:化学性能.修改件1Winding wires - Test methods - Part 4: Chemical properties; Amendment 19P;A4

IEC 60851-4 Edition 2.1-1997 绕组线.试验方法.第4部分:化学性能Winding wires - Test methods - Part 4: Chemical properties42P;A4

IEC 60851-5 AMD 1-1997 绕组线.试验方法.第5部分:电特性.修改件1Winding wires - Test methods - Part 5: Electrical properties; Amendment 13P;A4

IEC 60851-5 Edition 3.1-1997 绕组线.试验方法.第5部分:电性能Winding wires - Test methods - Part 5: Electrical properties40P;A4

IEC 60851-5-1996 绕组线.试验方法.第5部分:电特性Winding wires - Test methods - Part 5: Electrical properties28P;A4

IEC 60851-6 AMD 1-1997 绕组线.试验方法.第6部分:热性能.修订件1Winding wires - Test methods - Part 6: Thermal properties; Amendment 13P;A4

IEC 60851-6-1996 绕组线试验方法.第6部分:热性能Winding wires - Test methods - Part 6: Thermal properties23P;A4

IEC 60852-1-1986电信和电子设备用变压器和电感器的外形尺寸.第1部分:使用YEI-1型叠片的变压器和电感器

Outline dimensions of transformers and inductors for use in telecommunication and electronicequipment. Part 1 : Transformers and inductors using YEI-1 laminations18P;A4

IEC 60852-2-1992电信和电子设备用变压器和电感器的外形尺寸.第2部分:印制线路板座用采用YEx-2薄片的变压器和电感器

Outline dimensions of transformers and inductors for use in telecommunication and electronicequipment; part 2: transformers and inductors using YEx-2 laminations for printed wiring boardmounting19P;A4

IEC 60852-3-1992电信和电子设备用变压器和电感器的外形尺寸.第3部分:使用YUI-1型叠片铁芯的变压器和电感器

Outline dimensions of transformers and inductors for use in telecommunication and electronicequipment; part 3: transformers and inductors using YUI-1 laminations17P;A4

IEC 60852-4-1996电信和电子设备用变压器和电感器的外形尺寸.第4部分:使用YEI-2型叠片的变压器和电感器

Outline dimensions of transformers and inductors for use in telecommunication and electronicequipment - Part 4: Transformers and inductors using YUI-2 laminations33P;A4

（203） 351

IEC标准目录


开本页数

IEC 60852-5-1994电信和电子设备用变压器和电感器的外形尺寸.第5部分:使用C铁芯的Q系列变压器和电感器

Outline dimensions of transformers and inductors for use in telecommunication and electronicequipment - Part 5: Transformers and inductors using the series Q of C-cores13P;A4

IEC 60853-1 AMD 1-1994电缆周期电流和备用电流的计算.第1部分: 大、包括

18/30(36)kV的电缆的周期因数.补充件1

Calculation of the cyclic and emergency current rating of cables - Part 1: Cyclic rating factor forcables up to and including 18/30(36) kV; Amendment 15P;A4

IEC 60853-1-1985电缆周期性和应急电流额定值的计算.第1部分:18/30(36)KV及以下的电缆周期性额定值因数

Calculation of the cyclic and emergency current rating of cables. Part 1 : Cyclic rating factor forcables up to and including 18/30 (36) kV39P;A4

IEC 60853-2-1989电缆周期性和应急电流额定值的计算.第2部分:电压大于

18/30(36)KV的适于所有电压应急额定值的电缆周期性额

定值

Calculation of the cyclic and emergency current rating of cables; part 2: cyclic rating of cablesgreater than 18/30 (36) kV and emergency ratings for cables of all voltages104P;A4

IEC 60853-3-2002电缆周期性和事故电流定额的计算.第3部分:在半干燥土壤

中全压电缆的周期性定额因数

Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor forcables of all voltages, with partial drying of the soil29P;A4

IEC 60855-1985 带电作业用泡沫填充绝缘管和实心棒Insulating foam-filled tubes and solid rods for live working36P;A4

IEC 60856 AMD 1-1991 第1次修改Pre-recorded optical reflective videodisk system; "laser vision" 50 Hz/625 lines; PAL; amendment1

IEC 60856 AMD 2-1997 预录光学反射视盘系统."激光电视".50Hz/625行.PAL制.修订件2

Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL;Amendment 2

IEC 60856-1986 预录光学反射视盘系统."激光电视".50Hz/625行.PAL制Pre-recorded optical reflective videodisk system. "Laser vision" 50 Hz/625 lines - PAL67P;A4

IEC 60857 AMD 1-1991 第1次修改Pre-recorded optical reflective videodisk system; "laser vision" 60 Hz/525 lines; M/NTSC;amendment 1

IEC 60857 AMD 2-1997预录光学反射视盘系统."激光电视".60Hz/525行.M/NTSC制.修订件2

Pre-recorded optical reflective videodisk system - "Laser vision" 60 Hz/525 lines - M/NTSC;Amendment 239P;A4

IEC 60857-1986 预录光学反射录像磁盘系统."激光电视".60Hz/525行.M/NTSC制

Pre-recorded optical reflective videodisk system. "Laser vision" 60 Hz/525 lines - M/NTSC69P;A4

IEC 60860-1987 危急事故报警设备Warning equipment for criticality accidents37P;A4

IEC 60861-1987 排出废液中β和γ发射放射性核素的连续监控设备 Equipment for continuously monitoring for beta and gamma emitting radionuclides in liquid

IEC 60862-1-1989表面声波(SAW)滤波器.第1部分:一般介绍、标准值和试验

条件.第1章:一般介绍和标准值.第2章:试验条件

Surface acoustic wave (SAW) filters; part 1: general information, standard values and testconditions; chapter I: general information and standard values; chapter II: test conditions51P;A4

IEC 60862-2-2002 质量评定的声表面波(SAW)滤波器.第2部分:使用指南Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidance on use115P;A4

IEC 60862-3-1986 表面声波(SAW)滤波器.第3部分:标准外形(第Ⅳ章)Surface acoustic wave (SAW) filters. Part 3 : Standard outlines (Chapter IV)19P;A4

（204） 351

IEC标准目录


开本页数

IEC 60863-1986 可靠性、维修性和可用性预计的报告 Presentation of reliability, maintainability and availability predictions

IEC 60864-1 AMD 1-1987 第1次修改Standardization of interconnections between broadcasting transmitters or transmitter systemsand supervisory equipment. Part 1 : Interface standards for systems using dedicated

IEC 60864-1-1986广播发射机或发射机系统与监控装置互连的标准化.第1部分:采用专用互连的系统接口标准

Standardization of interconnections between broadcasting transmitters or transmitter systemsand supervisory equipment. Part 1 : Interface standards for systems using dedicatedinterconnections

IEC 60864-2-1997广播发射机或发射机系统和监督设备之间互连的标准化.第2部分:使用数据总线互连的接口标准

Standardization of interconnections between broadcasting transmitters or transmitter systemsand supervisory equipment - Part 2: Interface standards for systems using data bus typeinterconnections

IEC 60865-1-1993 短路电流效应的计算.第1部分:测定和计算方法Short-circuit currents; calculation of effects; part 1: definitions and calculation methods115P;A4

IEC 60865-2-1994 短路电流效应的计算.第2部分:计算举例Short-circuit currents - Calculation of effects - Part 2: Examples of calculation81P;A4

IEC 60866-1987 在0.50--15MHz频率范围内运行的水听器的特性和校准Characteristics and calibration of hydrophones for operation in the frequency range O.5 MHz to15 MHz

IEC 60867-1993 绝缘油.合成芳香烃基新鲜油的规范Insulating liquids; specifications for unused liquids based on synthetic aromatic hydrocarbons27P;A4

IEC 60869-1-1999 纤维光学衰减器.第1部分:总规范Fibre optic attenuators - Part 1: Generic specification47P;A4

IEC 60870-1-2-1989 遥控设备和系统.第1部分:概论.第2节:规范用指南Telecontrol equipment and systems; part 1: general considerations; section 2: guide forspecifications

IEC 60870-2-1-1995遥控设备和系统.第2部分:操作条件.第1节:电源和电磁兼容

性

Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply andelectromagnetic compatibility43P;A4

IEC 60870-2-2-1996遥控设备和系统.第2部分:使用条件.第2节:环境条件(气候

的、机械的及其它非电气条件的影响)

Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmentalconditions (climatic, mechanical and other non-electrical influences)33P;A4

IEC 60870-3-1989 遥控设备和系统.第3部分:接口(电特性)Telecontrol equipment and systems; part 3: interfaces (electrical characteristics)65P;A4

IEC 60870-4-1990 遥控设备和系统.第4部分:性能要求Telecontrol equipment and systems; part 4: performance requirements59P;A4

IEC 60870-5-101-2003远动设备和系统.第5-101部分:传输协议.基本远动任务的配

套标准

Telecontrol equipment and systems - Part 5-101: Transmission protocols; Companion standardfor basic telecontrol tasks184P;A4

IEC 60870-5-102-1996遥控设备和系统.第5部分:传输协议.第102节:总电源系统传

输的标准手册

Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companionstandard for the transmission of integrated totals in electric power systems99P;A4

IEC 60870-5-103-1997遥控设备和系统.第5部分:传输协议.第103节:保护设备的信

息接口用标准手册

Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standardfor the informative interface of protection equipment203P;A4

（205） 351

IEC标准目录


开本页数

IEC 60870-5-104-2000遥控设备和系统.第5-104部分:传输协议.使用标准传输轮廓

的IEC 60870-5-101所列标准的网络存取

Telecontrol equipment and systems - Part 5-104: Transmission protocols; Network access forIEC 60870-5-101 using standard transport profiles107P;A4

IEC 60870-5-1-1990 遥控设备和系统.第5部分:传输协议.第1节:传输帧格式Telecontrol equipment and systems; part 5: transmission protocols; section one: transmissionframe formats79P;A4

IEC 60870-5-2-1992 遥控设备和系统.第5部分:传输协议.第2节:中继发射程序Telecontrol equipment and systems; part 5: transmission protocols; section 2: link transmissionprocedures99P;A4

IEC 60870-5-3-1992遥控设备和系统.第5部分:传输协议.第3节:应用数据的一般

结构

Telecontrol equipment and systems; part 5: transmission protocols; section 3: general structureof application data43P;A4

IEC 60870-5-4-1993遥控设备和系统.第5部分:传输协议.第4节:应用信息元件的

定义和编码

Telecontrol equipment and systems; part 5: transmission protocols; section 4: definition andcoding of application information elements45P;A4

IEC 60870-5-5-1995 遥控设备和系统.第5部分:传输协议.第5节:基本应用功能Telecontrol equipment and systems - Part 5: Transmission protocols - Section 5: Basicapplication functions101P;A4

IEC 60870-6-2-1995遥控设备和系统.第6部分:与ISO标准和ITU-T推荐一致的遥

控协议.第2节:基本标准(OSI层1-4)

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standardsand ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4)83P;A4


控协议.第501节:TASE.1服务定义

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standardsand ITU-T recommendations - Section 501: TASE.1 service definitions169P;A4


控协议.第502节:TASE.1协议规范

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standardsand ITU-T recommendations - Section 502: TASE.1 protocol definitions57P;A4

IEC 60870-6-503-2002远程控制设备和系统.第6-503部分:与ISO标准和ITU-T推荐

标准相一致的远程控制协议.TASE.2服务和协议

Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations; TASE.2 services and protocol129P;A4

IEC 60870-6-601-1994远程控制设备和系统.第6部分:与ISO标准和ITU推荐相兼容

的传输协议.第601节:经过不变存取与包开关数据网络相连

系统定向连接传输协议

25P;A4

IEC 60870-6-701-1998远程控制设备和系统.第6-701部分:与ISO标准和ITU-T标准

相一致的远程控制协议.在终端系统中提供TASE.1应用服

务的功能图

Telecontrol equipment and systems - Part 6-701: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations - Functional profile for providing the TASE.1 applicationservice in end systems37P;A4

（206） 351

IEC标准目录


开本页数

IEC 60870-6-702-1998遥控设备和系统.第6-702部分:与ISO标准及ITU-T推荐标准

相适应的遥控协议.提供终端系统中TASE.2应用服务的功

能图

Telecontrol equipment and systems - Part 6-702: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations - Functional profile for providing the TASE.2 applicationservice in end systems57P;A4

IEC 60870-6-802-2002远程控制设备和系统.第6-802部分:与ISO标准和ITU-T推荐

标准相一致的远程控制协议.TASE.2目标模式

Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations; TASE.2 Object models81P;A4

IEC 60871-1-1997额定电压超过660V的交流电力系统用并联电容器.第1部分:总则.性能、试验和额定值.安全要求.安装和运行指南

Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 1: General -Performance, testing and rating - Safety requirements - Guide for installation and operation87P;A4

IEC 60871-4-1996 大约1000V电压的交流电力系统用分路电容器.第4部分:内部熔断器

Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 4: Internalfuses

IEC 60872-1-1998航海和无线电通信设备及系统.雷达测绘辅助设备.第1部分:自动雷达测绘辅助(ARPA).测试方法和所要求的测试结果

Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part1: Automatic radar plotting aids (ARPA) - Methods of testing and required test results43P;A4

IEC 60872-2-1999航海和无线电通信设备及系统.雷达测绘辅助设备.第2部分:自动跟踪辅助(ATA).测试方法和所要求的测试结果

Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part2: Automatic tracking aids (ATA) - Methods of testing and required test results

IEC 60872-3-2000海上导航和无线电通信设备及系统.雷达标绘仪.第3部分:电子标绘仪(EPA)性能要求.测试方法和要求的测试结果

Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part3: Electronic plotting aid (EPA); Performance requirements; Methods of testing and required test

IEC 60873-1986 工业过程控制系统用电动和气动模拟图表记录仪性能的评定方法

Methods of evaluating the performance of electrical and pneumatic analogue chart recorders foruse in industrial-process control systems67P;A4

IEC 60874-0-1988 光纤和光缆连接器.第0部分:分规范的制定指南Connectors for optical fibres and cables; part 0: guide for the construction of sectionalspecifications

IEC 60874-10-1-1997光纤和光缆连接器.第10-1部分:与A1型多模纤维连接的

BFOC/2.5光纤连接器详细规范

Connectors for optical fibres and cables - Part 10-1: Detail specification for fibre optic connectortype BFOC/2,5 terminated to multimode fibre type A112P;A4

IEC 60874-10-2-1997光纤和光缆连接器.第10-2部分:与B1型单模纤维连接的

BFOC/2.5光纤连接器详细规范

Connectors for optical fibres and cables - Part 10-2: Detail specification for fibre optic connectortype BFOC/2,5 terminated to single-mode fibre type B113P;A4

IEC 60874-10-3-1997光纤和光缆连接器.第10-3部分:单模和多模纤维用

BFOC/2,5型光纤适配器的详细规范

Connectors for optical fibres and cables - Part 10-3: Detail specification for fibre optic adaptortype BFOC/2,5 for single and multimode fibre13P;A4

IEC 60874-1-1-1994 光纤和光缆连接器.第1-1部分:分规范:环境分类Connectors for optical fibres and cables; part 1-1: blank detail specification; environmentalcategories

IEC 60874-1-1999 光纤和光缆连接器.第1部分:通用规范Connectors for optical fibres and cables - Part 1: Generic specification61P;A4

IEC 60874-14-10-1999光纤和光缆连接器.第14-10部分:连接B1型单模纤维的SC-APC型8级非调谐光纤连接器.详细规范

Connectors for optical fibres and cables - Part 14-10: Fibre optic pigtail or patch cord connectortype SC-APC untuned 8 terminated on single mode fibre type B1 - Detail specification19P;A4

（207） 351

IEC标准目录


开本页数

IEC 60874-14-1-1997光纤和电缆连接器.第14-1部分:连接A1a,A1b型多模纤维的

SC-PC型标准光纤连接器的详细规范

Connectors for optical fibres and cables - Part 14-1: Detail specification for fibre optic connectortype SC-PC standard terminated to multimode fibre type A1a, A1b17P;A4

IEC 60874-14-2-1997光纤和电缆连接器.第14-2部分:连接B1型单模纤维的SC-PC型调谐光纤连接器的详细规范

Connectors for optical fibres and cables - Part 14-2: Detail specification for fibre optic connectortype SC-PC tuned terminated to single-mode fibre type B116P;A4

IEC 60874-14-3-1997光纤和光缆连接器.第14-3部分:单模纤维用SC型光纤连接

器的详细规范

Connectors for optical fibres and cables - Part 14-3: Detail specification for fibre optic adaptor(simplex) type SC for single-mode fibre15P;A4

IEC 60874-14-4-1997光纤和光缆连接器.第14-4部分:多模纤维用SC型光纤连接

器的详细规范

Connectors for optical fibres and cables - Part 14-4: Detail specification for fibre optic adaptor(simplex) type SC for multimode fibre15P;A4

IEC 60874-14-5-1997光纤和光缆连接器.第14-5部分:与B1型单模纤维连接的SC-PC不调谐光纤连接器详细规范

Connectors for optical fibres and cables - Part 14-5: Detail specification for fibre optic connectortype SC-PC untuned terminated to single-mode fibre type B116P;A4

IEC 60874-14-6-1997光纤和光缆连接器.第14-6部分:连接B1型单模纤维的SC-APC型9级非调谐光纤连接器的详细规范

Connectors for optical fibres and cables - Part 14-6: Detail specification for fibre optic connectortype SC-APC 9?untuned terminated to single-mode fibre type B119P;A4

IEC 60874-14-7-1997光纤和电缆连接器.第14-6部分:连接B1型单模纤维的SC-APC型9级调谐光纤连接器的详细规范

Connectors for optical fibres and cables - Part 14-7: Detail specification for fibre optic connectortype SC-APC 9 tuned terminated to single-mode fibre type B117P;A4

IEC 60874-14-9-1999光纤和光缆连接器.第14-9部分:连接B1型单模纤维的SC-APC型8级调谐光纤连接器.详细规范

Connectors for optical fibres and cables - Part 14-9: Fibre optic connector type SC-APC tuned 8terminated on single-mode fibre type B1 - Detail specification19P;A4

IEC 60874-15-1994 光纤和光缆连接器.第15部分:DS型光纤连接器的分规范Connectors for optical fibres and cables - Part 15: Sectional specification for fibre opticconnector; type DS19P;A4

IEC 60874-16-1994 光纤和光缆连接器.第16部分:MT型光纤连接器分规范Connectors for optical fibres and cables - Part 16: Sectional specification for fibre optic connector- Type MT33P;A4

IEC 60874-17-1995 光纤和光缆连接器.第17部分:F-0.5光纤连接器分规范Connectors for optical fibres and cables - Part 17: Sectional specification for fibre opticconnector; Type F-05 (friction lock)19P;A4

IEC 60874-19-1-2003光纤光缆连接器.第19-1部分:A1a、A1b类多模纤维端接

SC-PC型(浮动双总)跳线光纤连接器.详细规范

Connectors for optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC(floating duplex) standard terminated on multimode fibre type A1a, A1b; Detail specification30P;A4

IEC 60874-19-1995光纤和光缆连接器.第19部分:光纤连接器的分规范.SC-D(uplex)型

Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector- Type SC-D(uplex)19P;A4

（208） 351

IEC标准目录


开本页数

IEC 60874-19-2-1999光纤和光缆连接器.第19-2部分:单模纤维连接器用SC(双向)光纤适配器.详细规范

Connectors for optical fibres and cables - Part 19-2: Fibre optic adaptor (duplex) type SC forsingle-mode fibre connectors - Detail specification18P;A4

IEC 60874-19-3-1999光纤和光缆连接器.第19-3部分:多模纤维连接器用SC(双向)光纤适配器.详细规范

Connectors for optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC formultimode fibre connectors - Detail specification19P;A4

IEC 60875-1-2000 非波长选定光纤分支器件.第1部分:总规范Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification67P;A4

IEC 60875-2-1992 光纤分支器件.第2部分:非波长选择分支器件的分规范Fibre optic branching devices; part 2: sectional specification; non-wavelength selective branchingdevices59P;A4

IEC 60875-3-1992 光纤分支器件.第3部分:分规范.波长选定分支器件Fibre optic branching devices; part 3: sectional specification; wavelength selective branchingdevices

IEC 60876-1-2001 光纤空间开关.第1部分:总规范Fibre optic spatial switches - Part 1: Generic specification65P;A4

IEC 60878-1988 医用电气设备的图形符号 Graphical symbols for electrical equipment in medical practice

IEC 60879-1986 循环喷流扇和调速器的性能与结构Performance and construction of electric circulating fans and regulators24P;A4

IEC 60880-1986 核电站安全系统用计算机软件Software for computers in the safety systems of nuclear power stations133P;A4

IEC 60880-2-2000核电站安全系统用计算机软件.第2部分:使用软件工具和预

先开发的软件对由常规失误导致的安全防护的软件情况

Software for computers important to safety for nuclear power plants - Part 2: Software aspects ofdefence against common cause failures, use of software tools and of pre-developed software79P;A4

IEC 60883-1987 录象带的色度信号与随机噪声之比的测定方法Measuring method for chrominance signal-to-random noise ratio for video tape recorders21P;A4

IEC 60884-1-2002 家用和类似用途的插头和插座引出线.第1部分:一般要求 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements

IEC 60884-2-1-1987 家用和类似用途的插头和插座引出线.第2部分第1节:插塞

式保险丝的特殊要求

Plugs and socket-outlets for household and similar purposes. Part 2: Particular requirements forfused plugs

IEC 60884-2-2-1989家用和类似用途的插头和插座引出线.第2部分第2节:电器

插座的特殊要求

Plugs and socket-outlets for household and similar purposes; part 2: particular requirements forsocket-outlets for appliances27P;A4

IEC 60884-2-3-1989家用和类似用途的插头和插座引出线.第2部分第3节:定置

设备用无联锁开关插座的特殊要求

Plugs and socket-outlets for household and similar purposes; part 2: particular requirements forswitched socket-outlets without interlock for fixed installations31P;A4

IEC 60884-2-4-1999家用和类似用途的插头和插座引出线.第2-4部分:SELV用的插头和插座引出线的特殊要求

Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirementsfor plugs and socket-outlets for SELV41P;A4

IEC 60884-2-5-1995家用和类似用途的插头和插座引出线.第2部分第5节:插线

板的特殊要求

Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements foradaptors37P;A4

（209） 351

IEC标准目录


开本页数

IEC 60884-2-6-1997家用和类似用途的插头和插座引出线.第6部分:固定设备用

带内锁的开关插座引出线的特殊要求

Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirementsfor switched socket-outlets with interlock for fixed installations27P;A4

IEC 60885-1-1987电缆的电气试验方法.第1部分:电压在450/750V以下(含450/750V)用电缆、花线和电线的电气试验

Electrical test methods for electric cables. Part 1 : Electrical tests for cables, cords and wires forvoltages up to and including 450/750 V9P;A4

IEC 60885-2-1987 电缆的电气试验方法.第2部分:局部放电试验Electrical test methods for electric cables. Part 2 : Partial discharge tests9P;A4

IEC 60885-3-1988电缆的电气试验方法.第3部分:挤压电力电缆长度方向局部

放电测量的试验方法

Electrical test methods for electric cables; part 3: test methods for partial dischargemeasurements on lengths of extruded power cable52P;A4

IEC 60888-1987 绞合导线的镀锌钢丝 Zinc-coated steel wires for stranded conductors.

IEC 60889-1987 用于架空导线的冷拔铝丝 Hard-drawn aluminium wire for overhead line conductors.

IEC 60891 AMD 1-1992对晶体硅光电器件测量特性I-V的温度修正和辐照度修正的

方法.修改件1

Procedures for temperature and irradiance corrections to measured I-V characteristics ofcrystalline silicon photovoltaic devices; amendment 13P;A4

IEC 60891-1987对晶体硅光电器件测量特性I-V的温度修正和辐照度修正的

方法

Procedures for temperature and irradiance corrections to measured I-V characteristics ofcrystalline silicone photovoltaic devices14P;A4

IEC 60893-1-1987电工用热固性树脂基工业刚性层压板规范.第1部分:定义、

标记和一般要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes. Part 1 : Definitions, designations and general requirements9P;A4

IEC 60893-2-1992电工用热固性树脂基工业刚性层压板规范.第2部分:试验方

法

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes; part 2: methods of test31P;A4

IEC 60893-3-1 AMD 1-1996电工用热固性树脂工业硬质层压片规范.第3部分:单项材料

规范.活页1:工业硬质层压片类型.修改件1

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes - Part 3: Specifications for individual materials - Sheet 1: Types of industrial rigidlaminated sheets; Amendment 13P;A4

IEC 60893-3-1-1992电工用热固性树脂基工业刚性层压板规范.第3部分:各种材

料规范.第1活页:工业刚性层压板的型号

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes; part 3: specifications for individual materials; sheet 1: types of industrial rigid laminatedsheets13P;A4

IEC 60893-3-2 Edition 1.1-1998电工用热固性树脂基工业刚性层压板规范.第3部分:特殊材

料规范第2章:环氧树脂基刚性层压板要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigidlaminated sheets based on epoxide resins29P;A4

（210） 351

IEC标准目录


开本页数


料规范.第2活页:环氧树脂基刚性层压板的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigidlaminated sheets based on epoxide resins29P;A4


料规范.第3活页:密胺树脂基刚性层压板的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes; part 3: specifications for individual materials; sheet 3: requirements for rigid laminatedsheets based on melamine resins17P;A4


料规范.第4活页:酚醛树脂基刚性层压板的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes; part 3: specifications for individual materials; sheet 4: requirements for rigid laminatedsheets based on phenolic resins21P;A4


料规范.第5活页:聚酯树脂基刚性压板的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes; part 3: specifications for individual materials; sheet 5: requirements for rigid laminatedsheets based on polyester resins19P;A4


料规范.第6活页:硅氧烷树脂基刚性层压板的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes; part 3: specifications for individual materials; sheet 6: requirements for rigid laminatedsheets based on silicone resins17P;A4

IEC 60893-3-7-1994电工用热固性树脂基工业刚性层压板规范.第3部分:专用材

料规范规范.第7活页:聚酰亚胺树脂基刚性层压板的要求

Specification for industrial rigid laminated sheets based on thermosetting resins for electricalpurposes - Part 3: Specifications for individual materials; sheet 7: Requirements for rigidlaminated sheets based on polyimide resins15P;A4

IEC 60894-1987 机器绕组线圈和棒的切向损耗测量用试验方法指南Guide for a test procedure for the measurement of loss tangent of coils and bars for machinewindings

IEC 60895-2002 带电作业.标称交流电压800kV以下和直流电压±600kV的带

电作业用的导电衣着

Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ?00 kV d.c.79P;A4

IEC 60896-11-2002 固定式铅酸蓄电池组.第11部分:开孔透气型.一般要求和试

验方法

Stationary lead-acid batteries - Part 11: Vented types; General requirements and methods of test39P;A4

IEC 60896-2-1995 固定式铅酸蓄电池.一般要求和试验方法.第2部分:阀调节型Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valveregulated types51P;A4

IEC 60897-1987 绝缘液体的闪电脉冲击穿电压测定方法Methods for the determination of the lightning impulse breakdown voltage of insulating liquids27P;A4

IEC 60898-1 AMD 1-2002电气附件.家用和类似设施用的过电流保护断路器.第1部分:交流操作断路器.修改件1

Electrical accessories - Circuit-breakers for overcurrent protection for household and similarinstallations - Part 1: Circuit-breakers for a.c. operation; Amendment 137P;A4

（211） 351

IEC标准目录


开本页数

IEC 60898-1 Edition 1.1-2002电气附件.家用和类似设施用的过电流保护断路器.第1部分:交流操作断路器.修改件1

Electrical accessories - Circuit-breakers for overcurrent protection for household and similarinstallations - Part 1: Circuit-breakers for a.c. operation249P;A4

IEC 60898-1-2002电气附件.家用和类似设施用的过电流保护断路器.第1部分:交流操作断路器

Electrical accessories - Circuit-breakers for overcurrent protection for household and similarinstallations - Part 1: Circuit-breakers for a.c. operation229P;A4

IEC 60898-2-2000家用和类似用途装置过电流保护断路器.第2部分:交流和直

流操作的线路断路器

Circuit-breakers for overcurrent protection for household an similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation37P;A4

IEC 60900 AMD 1-1995在交流电1000V和直流电1500V的情况下带电作业用的手

工工具.修改件1Hand tools for live working up to 1000 V a.c. and 1500 V d.c.; Amendment 139P;A4

IEC 60900 AMD 2-2002 高达1000V交流电和1500V直流电的带电作业用手工工具.修改件2

Hand tools for live working up to 1 000 V a.c. and 1 500 V d.c.; Amendment 23P;A4

IEC 60900-1987 在交流电1000V和直流电1500V的情况下带电作业用的手 Hand tools for live working up to 1000 V a.c. and 1500 V d.c.

IEC 60901 AMD 1-1997 单灯口荧光灯.性能规范.修改件1Single-capped fluorescent lamps - Performance specifications; Amendment 141P;A4

IEC 60901 AMD 2-2000 单灯头荧光灯.性能规范.修改件2Single-capped fluorescent lamps - Performance specifications; Amendment 2124P;A4

IEC 60901 Edition 2.2-2001 单头荧光灯.性能规范 Single-capped fluorescent lamps - Performance specifications

IEC 60901-1996 单灯头荧光灯.性能规范Single-capped fluorescent lamps - Performance specifications360P;A4

IEC 60903-2002 带电作业.绝缘材料手套Live working - Gloves of insulating material125P;A4

IEC 60904-10-1998 光电器件.第10部分:线性测量方法Photovoltaic devices - Part 10: Methods of linearity measurement25P;A4

IEC 60904-1-1987 光电器件.第1部分:光电池电流.电压性能的测定Photovoltaic devices; part 1: measurement of photovoltaic current-voltage characteristics10P;A4

IEC 60904-2 AMD 1-1998 光电器件.第2部分:标准太阳能电池的要求.修订件1Photovoltaic devices - Part 2: Requirements for reference solar cells; Amendment 13P;A4

IEC 60904-2-1989 光电器件.第2部分:基准太阳能电池的要求Photovoltaic devices; part 2: requirements for reference solar cells16P;A4

IEC 60904-3-1989光电器件.第3部分:带基准光谱辐照数据的地球光电太阳能

器件的测量原理

Photovoltaic devices; part 3: measurement principles for terrestrial photovoltaic (PV) solardevices with reference spectral irradiance data25P;A4

IEC 60904-5-1993光电器件.第5部分:用开路电压法测定光电器件等效电池的

温度

Photovoltaic devices; part 5: determination of the equivalent cell temperature (ECT) ofphotovoltaic (PV) devices by the open-circuit voltage method11P;A4

IEC 60904-6 AMD 1-1998 光电器件.第6部分:标准太阳能量参数要求.第1次修订Photovoltaic devices - Part 6: Requirements for reference solar modules; Amendment 13P;A4

（212） 351

IEC标准目录


开本页数

IEC 60904-6-1994 光电器件.第6部分:标准太阳能量参数要求Photovoltaic devices - Part 6: Requirements for reference solar modules13P;A4

IEC 60904-7-1998 光电器件.第7部分:光电器件检验中对失配误差的计算Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing ofa photovoltaic device7P;A4

IEC 60904-8-1998 光电器件.第8部分:光电器件光谱反应的测量Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device17P;A4

IEC 60904-9-1995 光电器件.第9部分:太阳能模拟器性能要求Photovoltaic devices - Part 9: Solar simulator performance requirements6P;A4

IEC 60905-1987 干式电力变压器加载导则 Loading guide for dry-type power transformers.

IEC 60906-1-1986家用和类似电器的IEC制插头和插座.第1部分:交流16A250V插头和插座

IEC System of plugs and socket outlets for household and similar purposes. Part 1 : Plugs andsocket-outlets 16 A 250 V a.c.31P;A4

IEC 60906-2-1997家用和类似用插头和插座出口的IEC系统.第2部分:15A、125V交流插头和插座出口

IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs andsocket-outlets 15 A 125 V a.c.19P;A4

IEC 60906-3-1994家用和类似电器的IEC制插头和插座.第3部分:交流和直流

16A 6V,12V,24V,48V,SELV插头和插座

IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugsand socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.c. and d.c.11P;A4

IEC 60908-1999 音频记录.小型磁盘数字音频系统Audio recording - Compact disc digital audio system209P;A4

IEC 60909-0-2001 三相交流系统内短路电流.第0部分:电流的计算Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents137P;A4

IEC 60909-3-1995三相交流系统短路电流计算.第3部分:同时双分流单相对地

短路电流和部分短路径流地电流

Short-circuit current calculation in three-phase a.c. systems - Part 3: Currents during twoseparate simultaneous single phase line-to-earth short circuits and partial short-circuit currentsflowing through earth53P;A4

IEC 60910-1988 轻水反应堆正常运行时泄漏的早期检查用污染监控仪Containment monitoring instrumentation for early detection of developing deviations from normaloperation in light water reactors.

IEC 60911-1987 加压轻水反应堆堆芯中适度冷却的监测Measurements for monitoring adequate cooling within the core of pressurized light water reactors39P;A4

IEC 60912-1996 核仪器.计数器逻辑中的ECL(发射极耦合逻辑)面板联结Nuclear instrumentation - ECL (Emitter Coupled Logic) front panel interconnections in counterlogic

IEC 60913-1988 电牵引架空线Electric traction overhead lines45P;A4

IEC 60914-1988 电话会议的电气及音响设备的要求 Conference systems - Electrical and audio requirements

IEC 60915-1987电子设备用电容电阻.单孔轴套安装轴动电子元件的轴端.轴套及装配佳尺寸

Capacitors and resistors for electronic equipment; preferred dimensions of spindle ends, bushesand for the mounting of single-hole, bush-mounted, spindle-operated electronic components18P;A4

（213） 351

IEC标准目录


开本页数

IEC 60917-1 AMD 1-2000研制电子设备机械构件用模块排序.第1部分:总标准.修改件

1

Modular order for the development of mechanical structures for electronic equipment practices -Part 1: Generic standard; Amendment 17P;A4

IEC 60917-1-1998 研制电子设备机械构件用模块排序.第1部分:总标准Modular order for the development of mechanical structures for electronic equipment practices -Part 1: Generic standard41P;A4

IEC 60917-2-1-1993发展中的电子设备构体机械结构模数序列.第2部分:分规

范.25mm设备构体接口的协调尺寸.第1节:详细规范.机柜和

机架的尺寸

Modular order for the development of mechanical structures for electronic equipment practices;part 2: sectional specification; interface co-ordination dimensions for the 25 mm equipmentpractice; section 1: detail specification; dimensions for cabinets and racks21P;A4

IEC 60917-2-1992研制电子设备机械构件用模块排序.第2部分:25mm设备的

接口配合尺寸的分规范

Modular order for the development of mechanical structures for electronic equipment practices;part 2: sectional specification; interface co-ordination dimensions for the 25 mm equipmentpractice

IEC 60917-2-2-1994研制电子设备机械构件用模块排序.第2部分:25mm设备的

接口配合尺寸的分规范.第2节:辐助框架、底盘、底板、面

板及插入件

Modular order for the development of mechanical structures for electronic equipment practices -Part 2: Sectional specification; interface co-ordination dimensions for the 25 mm equipmentpractice; section 2: Detail specification; dimensions for subracks, chassis, backplanes, frontpanels and plug-in units

IEC 60918 AMD 1-1992节距为1.27mm的适用于绝缘移动终端的聚氯乙烯绝缘带

状电缆

PVC insulated ribbon cable with a pitch of 1,27 mm suitable for insulation displacementtermination; amendment 1 to IEC 60918:19875P;A4

IEC 60918-1987 节距为1.27mm的适用于移动终端绝缘的聚氯乙烯绝缘带 PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement

IEC 60921 AMD 1-1990 管形荧光灯镇流器.性能要求.IEC 60921-88的修改件1Ballasts for tubular fluorescent lamps; performance requirements; amendment 1 to IEC60921:1988

IEC 60921 AMD 2-1994 第2次修改Ballasts for tubular fluorescent lamps - Performance requirements; Amendment 23P;A4

IEC 60921-1988 管形荧光灯镇流器.性能要求 Ballasts for tubular fluorescent lamps - Performance requirements

IEC 60923 AMD 1-2001灯附件.放电式灯用镇流器(管状荧光灯除外).性能要求.修改

件1

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) -Performance requirements; Amendment 17P;A4

IEC 60923 Edition 2.1-2001 灯的辅助设备.放电灯用镇流器(管状荧光灯除外).性能规范Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) -Performance requirements51P;A4

IEC 60923-1995 灯附件.放电式灯用镇流器(管状荧光灯除外).性能要求Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) -Performance requirements45P;A4

IEC 60925 AMD 1-1996 管形荧光灯直流电源镇流器.性能要求.第1次修改DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements;Amendment 15P;A4

（214） 351

IEC标准目录


开本页数

IEC 60925 AMD 2-2001 管状荧光灯用直流电子镇流器.性能要求.修改件2DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements;Amendment 23P;A4

IEC 60925 Edition 1.2-2001 管状荧光灯用直流电子镇流器.性能要求DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements37P;A4

IEC 60925-1989 管形荧光灯直流电源镇流器.性能要求D.c. supplied electronic ballasts for tubular fluorescent lamps; performance requirements36P;A4

IEC 60927 AMD 1-1999 灯的附件.启动装置(辉光启动器除外).性能要求.修改件1Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements;Amendment 15P;A4

IEC 60927 Edition 2.1-2000 电灯附件.起动装置(而不是起辉器).性能要求Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements59P;A4

IEC 60929 AMD 1-1994 荧光灯交流供电电子镇流器.性能要求.第1次修改A.C.-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements;Amendment 117P;A4

IEC 60929 AMD 2-1996 管形荧光灯用交流电子镇流器.性能要求.第2次修改AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements;Amendment 25P;A4

IEC 60929-1990 管形荧光灯用交流电子镇流器.性能要求A.C.-supplied electronic ballasts for tubular fluorescent lamps; performance requirements71P;A4

IEC 60930-1988 管理、医疗、护理人员安全使用医疗电子设备导则

Guidelines for administrative, medical, and nursing staff concerned with the safe use of medicalelectrical equipment21P;A4

IEC 60931-1 AMD 1-2002额定电压1000V及以下的交流系统用非自愈式并联电力电

容器.第1部分:总则.性能、试验和定额.安全要求.安装和操

作指南.修改件1

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up toand including 1000 V - Part 1: General; Performance, testing and rating; Safety requirements;Guide for installation and operation; Amendment 15P;A4

IEC 60931-1-1996额定电压1000V以下(含1000V)交流系统用非自恢复型并联

电力电容器.第1部分:总则.性能、试验和额定值.安全要求.安装和操作指南

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up toand including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements -Guide for installation and operation68P;A4

IEC 60931-2-1995额定电压在1000V以下(含1000V)交流系统用非自恢复型并

联功率电容器.第2部分:老化试验和破坏试验

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up toand including 1000 V - Part 2: Ageing test and destruction test17P;A4

IEC 60931-3-1996大于等于1000V电压的交流系统用非自愈并联电力电容器.第3部分:内部熔断器

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up toand including 1000 V - Part 3: Internal fuses19P;A4

IEC 60933-1 AMD 1-1992 第1次修改Audio, video and audiovisual systems; interconnections and matching values; part 1: 21-pinconnector for video systems; application no. 1; amendment 17P;A4

（215） 351

IEC标准目录


开本页数

IEC 60933-1-1988音频、视频和视听系统.互连和匹配值.第1部分:视频系统用

21管脚连接器.应用表1Audio, video and audiovisual systems - Interconnections and matching values. Part 1: 21-pinconnector for video systems - Application No.1

IEC 60933-3-1992音频、视频和视听系统.互连和匹配值.第3部分:电子新闻收

集摄影机和采用625行/50场系统复合消隐图象信号的便携

式磁带录象设备接口

Audio, video and audiovisual systems; interconnections and matching values; part 3: interface forthe interconnection of ENG cameras and portable VTRs using non-composite signals, for 625line/50 field systems19P;A4

IEC 60933-4-1994音频、视频和视听系统.互连和匹配值.第4部分:内部数字总

线用连接器和接线点

Audio, video and audiovisual systems - Interconnections and matching values - Part 4:Connector and cordset for domestic digital bus (D2B)9P;A4

IEC 60933-5-1992音频、视频和视听系统.互连和匹配值.第5部分:录象系统

Y/C连接器;连接器的电匹配值和描述

Audio, video and audiovisual systems; interconnections and matching values; part 5: Y/Cconnector for video systems; electrical matching values and description of the connector11P;A4

IEC 60934-2000 设备断路器(CBE)Circuit-breakers for equipment (CBE)225P;A4

IEC 60935-1996 核仪器.模块高速数据采集系统.快速信息通路(FASTBUS)Nuclear instrumentation - Modular high speed data acquisition system - FASTBUS215P;A4

IEC 60936-1 AMD 1-2002船舶导航和无线电通信设备及系统.雷达.第1部分:船载雷达

的性能要求.试验方法和要求的试验结果.修改件1

Maritime navigation and radiocommunication equipment and systems - Radar - Part 1: Shipborneradar; Performance requirements; Methods of testing and required test results; Amendment 18P;A4

IEC 60936-1 Edition 1.1-2002海上导航和无线电通信设备及系统.雷达.第1部分:船用雷达

的性能要求.试验方法和要求的测试结果

Maritime navigation and radiocommunication equipment and systems - Radar - Part 1: Shipborneradar; Performance requirements; Methods of testing and required test results67P;A4

IEC 60936-1-1999海上导航和无线电通信设备及系统.雷达.第1部分:船用雷

达.性能要求.测试方法和要求的测试结果

Maritime navigation and radiocommunication equipment and systems - Radar - Part 1: Shipborneradar - Performance requirements - Methods of testing and required test results62P;A4

IEC 60936-2-1998航海和无线电设备和系统.雷达.第2部分:高速飞行器用船载

雷达.试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborneradar for high-speed craft (HSC) - Methods of testing and required test results74P;A4

IEC 60936-3-2002船舶导航和无线电通信设备及系统.雷达.第3部分:有海图设

备的雷达性能要求.试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Radar - Part 3: Radarwith chart facilities; Performance requirements; Methods of test and required test results21P;A4

IEC 60937-1988 锗半导体γ射线光谱分析仪用锗半导体探头晶体端.帽罩尺

寸

Cryostat end-cap dimensions for germanium semiconductor detectors for gamma-rayspectrometers

IEC 60938-1-1999 抑制无线电磁干扰用固定电感器.第1部分:总规范Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification31P;A4

IEC 60938-2-1-1999抑制无线电磁干扰用固定电感器.第2-1部分:空白详细规范.被要求的电感器安全试验.评定等级为D级

Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification- Inductors for which safety tests are required - Assessment level D11P;A4

IEC 60938-2-1999 抑制无线电干扰用固定电感器.第2部分:分规范Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification30P;A4

（216） 351

IEC标准目录


开本页数

IEC 60938-2-2-1999抑制无线电磁干扰用固定电感器.第2-2部分:空白详细规范.仅要求做安全试验的电感器

Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification- Inductors for which safety tests are required (only)9P;A4

IEC 60939-1-1988 抑制无线电干扰用整套滤波装置.第1部分:一般说明 Complete filter units for radio interference suppression. Part 1: Generic specification

IEC 60939-2 AMD 1-1996抑制无线电干扰用整套滤波装置.第2部分:分规范.检验方法

的选择和一般要求.补充件1

Complete filter units for radio interference suppression - Part 2: Sectional specification - Selectionof methods of test and general requirements; Amendment 13P;A4

IEC 60939-2-1988 抑制无线电干扰用整套滤波装置.第2部分:分规范:试验方法

的选择及一般要求

Complete filter units for radio interference suppression. Part 2: Sectional specification - Selectionof methods of test and general requirements

IEC 60940-1988 抑制无线电干扰用电容、电阻、电感器及整套滤波装置的使用导则

Guidance information on the application of capacitors, resistors, inductors and complete filterunits for radio interference suppression

IEC 60942-2003 电声学.音响校准器Electroacoustics - Sound calibrators186P;A4

IEC 60944-1988 硅酮变压器用液体的维护导则Guide for the maintenance of silicone transformer liquids13P;A4

IEC 60945-2002海上导航和无线电通信设备及系统.一般要求.测试方法和

要求的测试结果

Maritime navigation and radiocommunication equipment and systems - General requirements -Methods of testing and required test results179P;A4

IEC 60946-1988 过程测量和控制装置的二元直流电压信号Binary direct voltage signals for process measurement and control systems13P;A4

IEC 60947-1 AMD 1-2000 低压开关设备和控制设备.第1部分:总则.修改件1 Low-voltage switchgear and controlgear - Part 1: General rules; Amendment 1

IEC 60947-1 AMD 2-2001 低压开关设备和控制设备.第1部分:总则.修改件2Low-voltage switchgear and controlgear - Part 1: General rules; Amendment 229P;A4

IEC 60947-1 Edition 3.2-2001 低压开关设备和控制设备.第1部分:总则 Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-2 AMD 1-1997 低压开关设备和控制设备.第2部分:断路器.修改件1Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment 157P;A4

IEC 60947-2 AMD 2-2001 低压开关设备和控制装置.第2部分:断路器.修改件2Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment 2109P;A4

IEC 60947-2 Edition 2.2-2001 低压开关设备和控制设备.第2部分:断路器 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-2-1995 低压开关设备和控制设备.第2部分:断路器Low-voltage switchgear and controlgear - Part 2: Circuit-breakers255P;A4

IEC 60947-3 AMD 1-2001低压开关设备和控制设备.第3部分:开关、隔离开关、开关-隔离开关和保险丝组合部件.修改件1

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectorsand fuse-combination units; Amendment 133P;A4

IEC 60947-3 Edition 2.1-2001低压开关设备和控制设备.第3部分:开关、隔离开关、开关-隔离开关和保险丝组合部件

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectorsand fuse-combination units103P;A4

IEC 60947-3-1999 低压开关和控制装置.第3部分:开关,断路器,开关断路器和

熔燃单元

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectorsand fuse-combination units

（217） 351

IEC标准目录


开本页数

IEC 60947-4-1 AMD 1-2002低压开关设备和控制设备.第4-1部分:接触器和电动机起动

器.机电式接触器和电动机起动器.修改件1

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters;Electromechanical contactors and motor starters; Amendment 137P;A4

IEC 60947-4-1 Edition 2.1-2002低压开关设备和控制设备.第4-1部分:接触器和电动机起动

器.机电式接触器和电动机起动器

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters;Electromechanical contactors and motor-starters191P;A4

IEC 60947-4-1-2000低压开关设备和控制设备.第4-1部分:接触器和起动器.电气

机械接触器和起动器

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters;Electromechanical contactors and motor starters177P;A4

IEC 60947-4-2 AMD 1-2001低压开关设备和控制设备.第4-2部分:接触器和电动机起动

器.交流半导体电动机控制器和起动器.修改件1

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters; ACsemiconductor motor controllers and starters; Amendment 141P;A4

IEC 60947-4-2 Edition 2.1-2002低压开关设备和控制设备.第4-2部分:接触器和电动机起动

器.交流半导体电动机控制器和起动器

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters; ACsemiconductor motor controllers and starters171P;A4

IEC 60947-4-2-1999低压开关设备和控制设备.第4-2部分:接触器和电动机起动

器.交流半导体电动机控制器和起动器

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - ACsemiconductor motor controllers and starters155P;A4

IEC 60947-4-3-1999低压开关设备和控制装置.第4-3部分:接触器和电动机起动

器.AC半导体控制器和非电动机负载用起动器

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - ACsemiconductor controllers and contactors for non-motor loads141P;A4

IEC 60947-5-1 AMD 1-1999低压开关设备和控制设备.第5部分:控制电路设备和开关元

件.第1节:机电控制电路设备.修改件1

Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements -Section 1: Electromechanical control circuit devices; Amendment 15P;A4

IEC 60947-5-1 AMD 2-1999低压开关设备和控制设备.第5-1部分:控制电路设备和开关

元件.机电控制电路设备.修改件2

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switchingelements - Electromechanical control circuit devices; Amendment 29P;A4

IEC 60947-5-1 Edition 2.1-1999低压开关设备和控制设备.第5-1部分:控制电路设备和开关

元件.机电控制电路设备

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switchingelements - Electromechanical control circuit devices167P;A4

IEC 60947-5-1 Edition 2.2-2000低压开关和控制装置.第5-1部分:控制线路装置和开关元件.电气机械控制线路装置


IEC 60947-5-1-1997低压开关设备和控制设备.第5-1部分:控制电路设备和开关

元件.机电控制电路设备


IEC 60947-5-2 AMD 1-1999低压开关设备和控制设备.第5-2部分:控制电路设备和开关

元件.接近开关.修改件1

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switchingelements - Proximity switches; Amendment 119P;A4

（218） 351

IEC标准目录


开本页数

IEC 60947-5-2 Edition 2.1-1999低压开关设备和控制设备.第5-2部分:控制电器和开关元件.接近开关

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switchingelements - Proximity switches191P;A4


元件.接近开关

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switchingelements - Proximity switches181P;A4


元件.错误条件下(PDF)固定行为临近装置的要求

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switchingelements - Requirements for proximity devices with defined behaviour under fault conditions(PDF)

IEC 60947-5-4-2002低压开关设备和控制设备.第5-4部分:控制电路器件和切换

元件.低能量触头性能的评估方法.特殊试验

Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switchingelements; Method of assessing the performance of low-energy contacts; Special tests49P;A4

IEC 60947-5-5-1997低压开关设备和控制设备.第5-5部分:有机械锁存器功能的

电子紧急停止设备

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switchingelements - Electrical emergency stop device with mechanical latching function29P;A4


元件.近接传感器和开关放大器用直流接口(NAMUR)

Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switchingelements - DC interface for proximity sensors and switching amplifiers (NAMUR)27P;A4

IEC 60947-6-1 AMD 1-1994低压开关设备和控制设备.第6部分:多功能设备.第1节:自动

转换开关设备.修改件1

Low-voltage switchgear and controlgear - Part 6: Multiple function equipment - Section 1:Automatic transfer switching equipment; Amendment 15P;A4

IEC 60947-6-1 AMD 2-1997低压开关和控制装置.第6部分:多功能设备.第1节:自动转换

开关设备.修改件1

Low-voltage switchgear and controlgear - Part 6: Multiple function equipment - Section 1:Automatic transfer switching equipment; Amendment 215P;A4

IEC 60947-6-1 Edition 1.2-1998低压开关设备和控制设备.第6-1部分:多功能设备.自动转接

切换设备

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment; Automatictransfer switching equipment82P;A4

IEC 60947-6-1-1989低压开关设备和控制设备.第6部分:多功能设备.第1节:自动

转接开关设备

Low-voltage switchgear and controlgear; part 6: multiple function equipment; section one;automatic transfer switching equipment77P;A4

IEC 60947-6-2-2002低压开关设备和控制设备.第6-2部分:多功能设备.控制和保

护开关器件(或设备)(CPS)

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment; Control andprotective switching devices (or equipment) (CPS)207P;A4

IEC 60947-7-1-2002低压开关设备和控制设备.第7-1部分:辅助设备.铜导线用接

线板

Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment; Terminal blocks forcopper conductors47P;A4

IEC 60947-7-2-2002低压开关设备和控制设备.第7-2部分:辅助设备.铜导线用接

线板的防护导线

Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment; Protective conductorterminal blocks for copper conductors35P;A4

（219） 351

IEC标准目录


开本页数

IEC 60947-7-3-2002低压开关设备和控制设备.第7-3部分:辅助设备.导火线用接

线板的安全要求

Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment; Safety requirements forfuse terminal blocks75P;A4

IEC 60948-1988 家用电子装置的数字键盘(HES) Numeric keyboard for home electronic systems (HES)

IEC 60949-1988 在考虑非绝缘加热效应条件下的热容许短路电流的计算

Calculation of thermally permissible short-circuit currents, taking into account non-adiabaticheating effects25P;A4

IEC 60950-1-2001 信息技术设备的安全性.第1部分:一般要求 Information technology equipment - Safety - Part 1: General requirements

IEC 60950-21-2002 信息技术设备的安全.第21部分:远程供电Information technology equipment - Safety - Part 21: Remote power feeding37P;A4

IEC 60951-1-1988电站核事故中和事故后辐射情况的监控设备.第1部分:一般

要求

Radiation monitoring equipment for accident and post-accident conditions in nuclear powerplants; part 1: general requirements69P;A4

IEC 60951-2-1988 电站核事故中和事故后辐射情况的监控设备.第2部分:连续

监控气态排出物中放射性惰性气体用的设备

Radiation monitoring equipment for accident and post-accident conditions in nuclear powerplants. Part 2: Equipment for continously monitoring radioactive noble gases in gaseous effluents

IEC 60951-3-1989电站核事故中和事故后辐射情况的监控设备.第3部分:高量

程γ射线剂量率监控设备

Radiation monitoring equipment for accident and post-accident conditions in nuclear powerplants; part 3: high range area gamma radiation dose rate monitoring equipment25P;A4

IEC 60951-4-1991电站核事故中和事故后辐射情况的监控设备.第4部分:轻水

核电站液流处理

Radiation monitoring equipment for accident and post-accident conditions in nuclear powerplants; part 4: process stream in light water nuclear power plants25P;A4

IEC 60951-5-1994核电站.事故中和事故后辐射情况的监控设备.第5部分:轻水

反应堆核电站中的空气的放射性

Nuclear power plants; radiation monitoring equipment for accident and post-accident conditions;part 5: radioactivity of air in light water nuclear power plants33P;A4

IEC 60952-1-1988 飞机用蓄电池组.第1部分:一般试验方法和性能级Aircraft batteries; part 1: general test requirements and performance levels27P;A4

IEC 60952-2-1991 飞机用蓄电池组.第2部分:设计和制造要求Aircraft batteries; part 2: design and construction requirements40P;A4

IEC 60952-3-1993 飞机用蓄电池组.第3部分:外部电连接器Aircraft batteries; part 3: external electrical connectors11P;A4

IEC 60953-1-1990汽轮机热力验收试验规则.第1部分:方法A:适用于大容量凝

汽式汽轮机的高精度

Rules for steam turbine thermal acceptance tests; part 1: method A: high accuracy for largecondensing steam turbines163P;A4

IEC 60953-2-1990汽轮机热验收试验规则.第2章:方法B--各种型式和尺寸的汽

轮机的大量程精度

Rules for steam turbine thermal acceptance tests; part 2: method B; wide range of accuracy forvarious types and sizes of turbines233P;A4

IEC 60953-3-2001汽轮机热力验收试验规则.第3部分:改型汽轮机的热性能验

证试验

Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification testsof retrofitted steam turbines157P;A4

（220） 351

IEC标准目录


开本页数

IEC 60955 AMD 1-1992 配电流程控制系统用C型(proway C)流程数据总线.第1次修

改

Process data highway, type C (PROWAY C), for distributed process control systems;amendment 1

IEC 60955-1989 配电流程控制系统用C型(prowayc)流程数据总线Process data highway, type C (PROWAY C), for distributed process control systems513P;A4

IEC 60958-1-1999 数字音频接口.第1部分:总则Digital audio interface - Part 1: General25P;A4

IEC 60958-3-2003 数字音频接口.第3部分:消费类用途Digital audio interface - Part 3: Consumer applications56P;A4

IEC 60958-4-1999 数字音频接口.第4部分:专业用Digital audio interface - Part 4: Professional applications37P;A4

IEC 60960-1988 核电站安全参数显示系统的功能设计准则Functional design criteria for a safety parameter display system for nuclear power stations21P;A4

IEC 60961-1993 使用宽12.65mm(0.5in)L型磁带的螺旋扫描盒式磁带录像

系统

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L139P;A4

IEC 60962-1988 汽轮机用石油润滑油的维护与使用指南Maintenance and use guide for petroleum lubricating oils for steam turbines49P;A4

IEC 60963-1988 未用过的聚丁烯的规范Specification for unused polybutenes17P;A4

IEC 60964-1989 核发电厂控制室的设计Design for control rooms of nuclear power plants129P;A4

IEC 60965-1989 不通过主控制室的关闭反应堆用的辅助控制点Supplementary control points for reactor shutdown without access to the main control room17P;A4

IEC 60966-1-1999射频与同轴电缆组件.第1部分:一般规范.一般要求和试验方

法.

Radio frequency and coaxial cable assemblies - Part 1: Generic specification - Generalrequirements and test methods109P;A4

IEC 60966-2-1 AMD 1-1997射频和同轴电缆组件.第2部分第1节:软同轴电缆组件分规

范.补充件1

Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexiblecoaxial cable assemblies; Amendment 113P;A4

IEC 60966-2-1 Edition 1.1-1997 射频同轴电缆组件.第2-1部分:柔性同轴电缆组件分规范Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexiblecoaxial cable assemblies48P;A4

IEC 60966-2-1-1991 射频和同轴电缆组件.第2-1部分:软同轴电缆组件分规范Radio frequency and coaxial cable assemblies; part 2-1: sectional specification for flexible coaxialcable assemblies25P;A4

IEC 60966-2-2-1992射频和同轴电缆组件.第2-2部分:柔性同轴电缆组件空白详

细规范

Radio frequency and coaxial cable assemblies; part 2-2: blank detail specification for flexiblecoaxial cable assemblies12P;A4

IEC 60966-2-3-1996射频和同轴电缆组件.第2-3部分:挠性同轴电缆部件的详细

规范

Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxialcable assemblies8P;A4

（221） 351

IEC标准目录


开本页数

IEC 60966-3-1-1992射频和同轴电缆组件.第3-1部分:半柔性同轴电缆组件空白

详细规范

Radio frequency and coaxial cable assemblies; part 3-1: blank detail specification for semi-flexible coaxial cable assemblies12P;A4

IEC 60966-3-1992 射频同轴电缆组件.第3部分:半柔软同轴电缆组件分规范Radio frequency and coaxial cable assemblies; part 3: sectional specification for semi-flexiblecoaxial cable assemblies23P;A4

IEC 60966-3-2-1996射频和同轴电缆组件.第2-3部分:GSM(0.8GHz-1GHz)用半

挠性同轴电缆部件的详细规范

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexiblecoaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)10P;A4

IEC 60966-4-1-1992射频同轴电缆组件.第4-1部分:半硬性同轴电缆组件空白详

细规范

Radio frequency and coaxial cable assemblies; part 4-1: blank detail specification for semi-rigidcoaxial cable assemblies12P;A4

IEC 60966-4-1992 射频同轴电缆组件.第4部分:半硬性同轴电缆组件分规范Radio frequency and coaxial cable assemblies; part 4: sectional specification for semi-rigidcoaxial cable assemblies29P;A4

IEC 60968 AMD 1-1991 普通照明设备用的自镇流灯.安全要求.修改件1Self-ballasted lamps for general lighting services; safety requirements; amendment 13P;A4

IEC 60968 AMD 2-1999 一般照明用自镇流灯.安全要求.第2次修订Self-ballasted lamps for general lighting services - Safety requirements; Amendment 211P;A4

IEC 60968 Edition 1.2-1999 普通照明设备用自镇流灯.安全要求Self-ballasted lamps for general lighting services - Safety requirements31P;A4

IEC 60968-1988 普通照明设备用的自镇流灯.安全要求Self-ballasted lamps for general lighting services; safety requirements27P;A4

IEC 60969 AMD 1-1991 普通照明设备用的自镇流灯.性能要求.修改件1Self-ballasted lamps for general lighting services; performance requirements; amendment 13P;A4

IEC 60969 AMD 2-2000 普通照明设备用的自镇流灯.性能要求.修改件2Self-ballasted lamps for general lighting services - Performance requirements; Amendment 23P;A4

IEC 60969 Edition 1.2-2001 一般照明用自镇流灯.性能要求Self-ballasted lamps for general lighting services - Performance requirements19P;A4

IEC 60969-1988 普通照明设备用的自镇流灯.性能要求Self-ballasted lamps for general lighting services; performance requirements17P;A4

IEC 60970-1989 绝缘液体中颗粒计数和大小测定的方法Methods for counting and sizing particles in insulating liquids35P;A4

IEC 60973-1989 锗γ射线探测器的试验程序Test procedures for germanium gamma-ray detectors79P;A4

IEC 60974-1 AMD 1-2000 电弧焊设备.第1部分:焊接电源.修改件1Arc welding equipment - Part 1: Welding power sources; Amendment 111P;A4

IEC 60974-10-2002 弧焊设备.第10部分:电磁兼容性(EMC)要求Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements29P;A4

（222） 351

IEC标准目录


开本页数

IEC 60974-11-1992 弧焊设备.第11部分:焊条钳Arc-welding equipment; part 11: electrode holders25P;A4

IEC 60974-12-1992 弧焊设备.第12部分:焊接电缆的连接器Arc-welding equipment; part 12: coupling devices for welding cables23P;A4

IEC 60974-2-2002 弧焊设备.第2部分:液体冷却系统Arc welding equipment - Part 2: Liquid cooling systems14P;A4

IEC 60974-5-2002 电弧焊设备.第5部分:焊丝进料装置Arc welding equipment - Part 5: Wire feeders37P;A4

IEC 60974-6-2003 弧焊设备.第6部分:有限工作时间手动金属弧焊电源Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources46P;A4

IEC 60974-7-2000 电弧焊设备.第7部分:吹管Arc-welding equipment - Part 7: Torches55P;A4

IEC 60975-1989 目标模块用微处理机的通用格式Microprocessor universal format for object modules71P;A4

IEC 60976 AMD 1-2000 医疗电气设备.医疗电子加速机功能的工作特性.修改件1Medical electrical equipment - Medical electron accelerators - Functional performancecharacteristics; Amendment 119P;A4

IEC 60976-1989 医疗电气设备.医疗电子加速机功能的工作特性Medical electrical equipment; medical electron accelerators; functional performancecharacteristics

IEC 60978-1989 三芳基磷酸酯涡轮机控制液的维护和使用指南Maintenance and use guide for triaryl phosphate ester turbine control fluids43P;A4

IEC 60979-1989 绕线用线Wires for wire wrapping applications15P;A4

IEC 60980-1989 核电站安全系统的电气设备抗震性能鉴定的推荐规程

Recommended practices for seismic qualification of electrical equipment of the safety system fornuclear generating stations79P;A4

IEC 60981-1989 电气装置用特重型刚性布线钢管Extra-heavy duty rigid steel conduits for electrical installations25P;A4

IEC 60982-1989 连续或断续输出的利用电离辐射的电平测量系统Level measuring systems utilizing ionizing radiation with continuous or switching output29P;A4

IEC 60983-1995 小型灯Miniature lampes58P;A4

IEC 60984 AMD 1-2002 带电作业用绝缘材料衣袖.修改件1Sleeves of insulating material for live working; Amendment 13P;A4

IEC 60984 Edition 1.1-2002 带电作业用绝缘材料衣袖Sleeves of insulating material for live working75P;A4

IEC 60984-1990 带电作业用绝缘材料套Sleeves of insulating material for live working77P;A4

（223） 351

IEC标准目录


开本页数

IEC 60986-2000额定电压从6kV(U=7.2kV)至30kV(U=36kV)(包括30kV)的电缆的短路温度极限值

Short-circuit temperature limits of electric cables with rated voltages from 6 kV (U = 7,2 kV) up to30 kV (U = 36 kV)19P;A4

IEC 60987-1989 对核电站安全起重要作用的程序数字计算机Programmed digital computers important to safety for nuclear power stations47P;A4

IEC 60988-1990 发现松动部分用自动监控系统.性能,设计准则和运转程序Acoustic monitoring systems for loose parts detection; characteristics, design criteria andoperational procedures43P;A4

IEC 60990-1999 接触电流和安全导体电流的测量方法Methods of measurement of touch current and protective conductor current109P;A4

IEC 60991-1989 小型电动机用弹性安装环.安装尺寸Resilient mounting rings for small motors; mounting dimensions7P;A4

IEC 60993-1989 开口镍镉电池用电解液Electrolyte for vented nickel-cadmium cells23P;A4

IEC 60994-1991 水力机械振动和脉动现场测量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storagepumps and pump-turbines)133P;A4

IEC 60996-1989 可用于电容器的介质损耗角正切δ测量的核校准确度的方

法

Method for verifying accuracy of tan delta measurements applicable to capacitors8P;A4

IEC 60998-1-2002 家用和类似用途低压电路连接器件.第1部分:一般要求Connecting devices for low-voltage circuits for household and similar purposes - Part 1: Generalrequirements47P;A4

IEC 60998-2-1-2002家用和类似用途低压电路连接器件.第2-1部分:作为单独分

立件的带螺纹式夹紧装置的连接器件的特殊要求

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1:Particular requirements for connecting devices as separate entities with screw-type clampingunits


立件的带无螺纹型夹紧装置的连接器件的特殊要求

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2:Particular requirements for connecting devices as separate entities with screwless-type clampingunits


立件的带绝缘穿刺式夹紧装置的连接器件的特殊要求

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3:Particular requirements for connecting devices as separate entities with insulation-piercingclamping units

IEC 60998-2-4-1993家用和类似用途低压电路连接设备.第2部分第4节:缠绕式

连接装置的特殊要求

Connecting devices for low-voltage circuits for household and similar purposes; part 2-4:particular requirements for twist-on connecting devices39P;A4

IEC 60998-2-5 AMD 1-1999家用和类似用途低压电路连接设备.第2-5部分:端子或连接

设备用接线盒(接线和/或分线)的特殊要求.修改件1

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5:Particular requirements for connecting boxes (junction and/or tapping) for terminals or connectingdevices; Amendment 15P;A4

（224） 351

IEC标准目录


开本页数

IEC 60998-2-5 Edition 1.1-2000家用和类似用途低压电路连接设备.第2-5部分:终端或连接

装置用的连接盒的特殊要求

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5:Particular requirements for connecting boxes (junction and/or tapping) for terminals or connectingdevices

IEC 60998-2-5-1996家用和类似用途低压电路连接设备.第2-5部分:端子和连接

设备用接线盒(接线和/或分线)的特殊要求

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5:Particular requirements for connecting boxes (junction and/or tapping) for terminals or connectingdevices

IEC 60999-1-1999

连接装置.铜电导线.螺旋式和非螺旋式夹紧装置的安全要

求.第1部分:从0.2mm〈上标2〉到35mm〈上标2〉包括

35mm〈(hoch)2〉在内的导线用的夹紧装置一般要求和特

殊要求

Connecting devices - Electrical copper conductors - Safety requirements for screw-type andscrewless-type clamping units - Part 1: General requirements and particular requirements forclamping units for conductors from 0,2 mm up to 35 mm (included)55P;A4

IEC 60999-2-1995连接装置.铜电线用螺旋式和非螺旋式夹紧装置的安全要

求.第2部分:导体截面为 35m.m - 300m.m 的特殊要求

Connecting devices - Safety requirements for screw-type and screwless-type clamping units forelectrical copper conductors - Part 2: Particular requirements for conductors from 35 mm up to300 mm29P;A4

IEC 61000-2-10-1998电磁兼容性(EMC).第2-10部分:环境.HEMP环境描述.传导

干扰

Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMPenvironment - Conducted disturbance85P;A4

IEC 61000-2-11-1999 电磁兼容性(EMC).第2-11部分:环境.HEMP环境分类Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMPenvironments

IEC 61000-2-2-2002电磁兼容性(EMC).第2-2部分:环境.在公用低压供电系统中

低频传导骚扰和信号传输的兼容性水平

Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems57P;A4

IEC 61000-2-4-2002电磁兼容性(EMC).第2-4部分:环境.工厂中低频传导骚扰的

兼容性水平

Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrialplants for low-frequency conducted disturbances75P;A4

IEC 61000-2-9-1996电磁兼容性(EMC).第2部分:环境.第9节:HEMP环境描述.辐射干扰.基本EMC公布

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMPenvironment - Radiated disturbance - Basic EMC publication49P;A4

IEC 61000-3-11-2000电磁兼容性.第3-11部分:限值.公共低压供电系统的电压变

化、电压波动和闪烁范围.额定电流为75A的设备并且在有

条件连接的情况下

Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltagefluctuations and flicker in public low-voltage supply systems; Equipment with rated current 75 Aand subject to conditional connection

IEC 61000-3-2 AMD 1-2001电磁兼容性(EMC).第3-2部分:限值.谐波电流辐射的限值(设备输入电流为16A/相位).修改件1

Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions(equipment input current 16 A per phase); Amendment 127P;A4

IEC 61000-3-2 Edition 2.1-2001电磁兼容性(EMC).第3-2部分:限值.谐波电流辐射的限值(设备输入电流为16A/相位)

Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions(equipment input current 16 A per phase)55P;A4

IEC 61000-3-2-2000电磁兼容性(EMC).第3-2部分:极限值.谐波电流辐射的极限

值(设备输入电流为16A/相位)Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions(equipment input current 16 A per phase)

（225） 351

IEC标准目录


开本页数

IEC 61000-3-3 AMD 1-2001电磁兼容性(EMC).第3-3部分:限值.不针对条件连接和每相

额定电流小于等于16A设备的公共低压供电系统中电压的

变化和波动极限值

Electromagnetic compatibility (EMC) - Part 3-3: Limits; Limitation of voltage changes, voltagefluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16A per phase and not subject to conditional connection; Amendment 125P;A4

IEC 61000-3-3 Edition 1.1-2002电磁兼容性.第3-3部分:限值.不针对条件连接和每相额定电

流小于等于16A设备的公共低压供电系统中电压变化和波

动的限定

Electromagnetic compatibility (EMC) - Part 3-3: Limits; Limitation of voltage changes, voltagefluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16A per phase and not subject to conditional connection53P;A4

IEC 61000-3-3-1994电磁兼容性(EMC).第3部分:限值.第3节:额定电流小于等于

16A设备的低压供电系统中电压波动极限值

Electromagnetic compatibility (EMC) - Part 3: Limits; section 3: Limitation of voltage fluctuationsand flicker in low-voltage supply systems for equipment with rated current 16 A41P;A4

IEC 61000-3-8-1997电磁兼容性.第3部分:限值.第8节:低压设备用符号.辐射级、

频带宽和电磁干扰级别

Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltageelectrical installations - Emission levels, frequency bands and electromagnetic disturbance levels39P;A4

IEC 61000-4-10 AMD 1-2000电磁兼容性.第4-10部分:试验和测量技术.阻尼振动磁场抗

扰试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Dampedoscillatory magnetic field immunity test; Amendment 15P;A4

IEC 61000-4-10 Edition 1.1-2001

电磁兼容性.第4-10部分:试验和测量方法.阻尼振动磁场抗

扰试验

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Dampedoscillatory magnetic field immunity test59P;A4

IEC 61000-4-10-1993电磁兼容性.第4部分:试验和测量方法.第10节:阻尼振荡磁

场抗扰试验.基本电磁兼容性(EMC)出版物

Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 10:damped oscillatory magnetic field immunity test; basic EMC publication59P;A4

IEC 61000-4-11 AMD 1-2000电磁兼容性.第4-11部分:试验和测量技术.电压降、短路和

电压波动抗扰试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques; Voltagedips, short interruptions and voltage variations immunity tests; Amendment 15P;A4

IEC 61000-4-11 Edition 1.1-2001

电磁兼容性.第4-11部分:试验和测量方法.电压降、短路和

电压波动抗扰试验

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measuring techniques; Voltagedips, short interruptions and voltage variations immunity tests41P;A4

IEC 61000-4-11-1994电磁兼容性.第4部分:试验和测量方法.第11节:电压磁倾角

、短暂中断及电压随变抗扰性试验

Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 11:Voltage dips, short interruptions and voltage variations immunity tests41P;A4

IEC 61000-4-12 AMD 1-2000电磁兼容性.第4-12部分:试验和测量技术.振动波抗扰试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques;Oscillatory waves immunity test; Amendment 15P;A4

IEC 61000-4-12 Edition 1.1-2001

电磁兼容性.第4-12部分:试验和测量方法.振荡波抗扰试验Electromagnetic compatibility (EMC) - Part 4-12: Testing and measuring techniques; Oscillatorywaves immunity test77P;A4

（226） 351

IEC标准目录


开本页数

IEC 61000-4-1-2000电磁兼容性.第4-1部分:试验和测量技术.IEC 61000-4系列

总览

Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overviewof IEC 61000-4 series27P;A4

IEC 61000-4-12-1995电磁兼容性.第4部分:试验和测量方法.第12节:振荡波抗扰

性试验.基本电磁性发布

Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 12:Oscillatory waves immunity test; basic EMC publication85P;A4

IEC 61000-4-13-2002电磁兼容性.第4-13部分:试验和测量技术.包括交流电功率

点主要信号的低频抗扰试验谐波和中间谐波

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques;Harmonics and interharmonics including mains signalling at a.c. power port, low frequencyimmunity tests

IEC 61000-4-14 AMD 1-2001电磁兼容性.第4-14部分:试验和测量技术.电压波动抗扰试

验.修改件1

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltagefluctuation immunity test; Amendment 15P;A4

IEC 61000-4-14 Edition 1.1-2002

电磁兼容性.第4-14部分:试验和测量技术.电压波动抗扰试

验

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltagefluctuation immunity test29P;A4

IEC 61000-4-14-1999电磁兼容性(EMC).第4-14部分:试验和测量技术.电压波动

防护试验

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltagefluctuation immunity test29P;A4

IEC 61000-4-15 AMD 1-2003电磁兼容性.第4-15部分:试验和测量方法.闪烁计功能和设

计规范.修改1

Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques;Flickermeter; Functional and design specifications; Amendment 122P;A4

IEC 61000-4-15 Edition 1.1-2003

电磁兼容性.第4部分:试验和测量方法.第15节:闪烁计.功能

和设计规范

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques; Section 15:Flickermeter; Functional and design specifications56P;A4

IEC 61000-4-15-1997电磁兼容性.第4部分:试验和测量方法.第15节:闪烁计功能

和设计规范

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 15:Flickermeter - Functional and design specifications43P;A4

IEC 61000-4-16 AMD 1-2001电磁兼容性(EMC).第4-16部分:试验和测量技术.0Hz-150KHz频率范围的普通模块导电抗扰试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test forimmunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz;Amendment 15P;A4

IEC 61000-4-16 Edition 1.1-2002

电磁兼容性(EMC).第4-16部分:试验和测量技术.0 Hz-150KHz频率范围的普通模块导电抗扰试验

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test forimmunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz49P;A4

IEC 61000-4-16-1998电磁兼容性(EMC).第4-16部分:试验和测量技术.导电抗扰

试验,0Hz-150Hz频率范围分布的普通模块

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test forimmunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz49P;A4

IEC 61000-4-17 AMD 1-2001电磁兼容性(EMC).第4-17部分:试验和测量技术.直流电输

入点脉动.干扰试验

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple ond.c. input power port immunity test; Amendment 15P;A4

（227） 351

IEC标准目录


开本页数

IEC 61000-4-17 Edition 1.1-2002

电磁兼容性(EMC).第4-17部分:试验和测量技术.直流电流

输入功率点通道.干扰试验

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple ond.c. input power port immunity test27P;A4

IEC 61000-4-17-1999电磁兼容性(EMC).第4-17部分:试验和测量技术.直流电输

入点脉动.干扰试验

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple ond.c. input power port, immunity test27P;A4

IEC 61000-4-2 AMD 1-1998电磁兼容性(EMC).第4-2部分:试验和测量技术. 第2节:静电

放电抗扰试验.补充1

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measuring techniques - Electrostaticdischarge immunity test; Amendment 15P;A4

IEC 61000-4-2 AMD 2-2000电磁兼容性.第4-2部分:试验和测量技术.静电放电干扰实

验.修改件2

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques;Electrostatic discharge immunity test; Amendment 213P;A4

IEC 61000-4-2 Edition 1.2-2001 电磁兼容性.第4-2部分:试验和测量方法.静电放电抗扰试验Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques;Electrostatic discharge immunity test75P;A4

IEC 61000-4-20-2003电磁兼容性.第4-20部分:试验和测量方法.横向电磁波导辐

射和干扰试验

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emissionand immunity testing in transverse electromagnetic (TEM) waveguides138P;A4

IEC 61000-4-2-1995电磁兼容性(EMC).第4部分:试验和测量技术. 第2节:静电放

电抗扰试验.基本EMC发行

Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 2:Electrostatic discharge immunity test - Basic EMC publication58P;A4

IEC 61000-4-23-2000电磁兼容性(EMC).第4-23部分:试验和测量技术.HEMP和其它辐射骚扰的防护装置试验方法

Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques; Testmethods for protective devices for HEMP and other radiated disturbances185P;A4

IEC 61000-4-24-1997电磁兼容性(EMC).第4部分:试验和测量技术.第24节:HEMP传导干扰的防护设备用试验方法.基本电磁兼容性

的公布

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24:Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication21P;A4

IEC 61000-4-25-2001电磁兼容性(EMC).第4-25部分:试验和测量方法.设备和系

统用HEMP抗扰试验方法

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques; HEMPimmunity test methods for equipment and systems95P;A4

IEC 61000-4-27-2000 电磁兼容性(EMC).第4-27部分:试验和测量技术.不平衡抗

扰性试验

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques;Unbalance, immunity test

IEC 61000-4-28 AMD 1-2001电磁兼容性(EMC).第4-28部分:试验和测量技术.电源频率

变化和抗扰试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variationof power frequency, immunity test; Amendment 15P;A4

IEC 61000-4-28 Edition 1.1-2002

电磁兼容性(EMC).第4-28部分:试验和测量技术.电源频率

变化和抗扰试验

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variationof power frequency, immunity test25P;A4

（228） 351

IEC标准目录


开本页数

IEC 61000-4-28-1999电磁兼容性(EMC).第4-28部分:试验和测量技术.电源频率

变化和抗扰试验

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques -Variation of power frequency, immunity test27P;A4

IEC 61000-4-29-2000 电磁兼容性.第4-29部分:试验和测量技术.直流输入功率口

抗扰试验的电压扰动、短时中断和电压振动

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltagedips, short interruptions and voltage variations on d.c. input power port immunity tests

IEC 61000-4-3 AMD 1-2002电磁兼容性(EMC).第4-3部分:试验和测量技术.辐射、射频

、电磁场抗扰度试验.修改1

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated,radio-frequency, electromagnetic field immunity test; Amendment 121P;A4

IEC 61000-4-3 Edition 2.1-2002电磁兼容性(EMC).第4-3部分:试验和测量方法.辐射、射频

和电磁场抗扰试验

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated,radio-frequency, electromagnetic field immunity test107P;A4

IEC 61000-4-30-2003电磁兼容性(EMC).第4-32部分:试验和测量技术.功率质量

测量方法

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Powerquality measurement methods98P;A4

IEC 61000-4-3-2002电磁兼容性.第4-3部分:试验和测量技术.辐射、射频和电磁

场抗扰性试验

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated,radio-frequency, electromagnetic field immunity test91P;A4

IEC 61000-4-32-2002电磁兼容性(EMC).第4-32部分:试验和测量技术.高度电磁

冲击力模拟装置摘要

Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques; High-altitude electromagnetic impulse HEMP simulator compendium108P;A4

IEC 61000-4-4 AMD 1-2000电磁兼容性.第4-4部分:试验和测量技术.电快速瞬时/突发

抗扰试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques; Electricalfast transient/burst immunity test; Amendment 15P;A4

IEC 61000-4-4 AMD 2-2001电磁兼容性.第4-4部分:试验和测量技术.电快速瞬时/突发

抗扰试验.修改件2

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques; Electricalfast transient/burst immunity test; Amendment 27P;A4

IEC 61000-4-4-1995电磁兼容性(EMC).第4部分:试验和测量技术.第4节:电气快

速瞬时/冲击抗扰试验.基本EMC出版物

Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 4:Electrical fast transient/burst immunity test - Basic EMC publication59P;A4

IEC 61000-4-5 AMD 1-2000电磁兼容性.第4-5部分:试验和测量技术.过电压抗扰试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques; Surgeimmunity test; Amendment 15P;A4

IEC 61000-4-5 Edition 1.1-2001 电磁兼容性.第4-5部分:试验和测量方法.电涌抗扰试验Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques; Surgeimmunity test77P;A4

IEC 61000-4-5-1995电磁兼容性(EMC).第4部分:试验和测量技术.第5节:过电压

抗扰试验

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5:Surge immunity test77P;A4

（229） 351

IEC标准目录


开本页数

IEC 61000-4-6 AMD 1-2000电磁兼容性.第4-6部分:试验和测量技术.射频场引起的抗自

电源来的干扰.修改件1

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunityto conducted disturbances, induced by radio-frequency fields; Amendment 15P;A4

IEC 61000-4-6 Edition 1.1-2001电磁兼容性.第4-6部分:试验和测量方法.抗射频场引起的馈

电线感应干扰

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunityto conducted disturbances, induced by radio-frequency fields85P;A4

IEC 61000-4-6-1996电磁兼容性(EMC).第4部分:试验和测量技术.第6节:耐电源

及射频磁场产生的干扰阻抗

Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6:Immunity to conducted disturbances, induced by radio-frequency fields85P;A4

IEC 61000-4-7-2002电磁兼容性(EMC).第4-7部分:试验和测量技术.供电系统及

所连设备谐波和谐间波的测量和仪器仪表的通用指南

Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques; Generalguide on harmonics and interharmonics measurements and instrumentation, for power supplysystems and equipment connected thereto71P;A4

IEC 61000-4-8 AMD 1-2000电磁兼容性.第4-8部分:试验和测量技术.电源频率磁场抗扰

试验.修改件1

Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques; Powerfrequency magnetic field immunity test; Amendment 15P;A4

IEC 61000-4-8 Edition 1.1-2001电磁兼容性.第4-8部分:试验和测量方法.电源频率磁场抗扰

试验

Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques; Powerfrequency magnetic field immunity test61P;A4

IEC 61000-4-8-1993电磁兼容性.第4部分:试验和测量方法.第8节:电源频率磁场

抗扰试验.基本电磁兼容性(EMC)出版物

Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 8:power frequency magnetic field immunity test; basic EMC publication59P;A4

IEC 61000-4-9 AMD 1-2000电磁兼容性.第4-9部分:试验和测量技术.脉冲磁场抗扰试

验.修改件1

Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Pulsemagnetic field immunity test; Amendment 15P;A4

IEC 61000-4-9 Edition 1.1-2001 电磁兼容性.第4-9部分:试验和测量方法.脉冲磁场抗扰试验Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Pulsemagnetic field immunity test59P;A4

IEC 61000-4-9-1993电磁兼容性.第4部分:试验和测量方法.第9节:脉冲磁场抗扰

试验.基本电磁兼容性(EMC)出版物

Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 9:pulse magnetic field immunity test; basic EMC publication57P;A4

IEC 61000-5-5-1996电磁兼容性.第5部分:设置和缓和导则.第5节:HEMP自电源

来的干扰保护设备规范.基本电磁兼容性(EMC)出版物

Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5:Specification of protective devices for HEMP conducted disturbance - Basic EMC publication71P;A4

IEC 61000-5-7-2001电磁兼容性.第5-7部分:安装和减轻指南.对电磁干扰防护的

外壳提供的防护等级

Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines; Degrees ofprotection provided by enclosures against electromagnetic disturbances (EM code)51P;A4

IEC 61000-6-1-1997电磁兼容性.第6部分:总标准.第1节:住宅区,工业和轻工业环

境干扰性

Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity forresidential, commercial and light-industrial environments27P;A4

（230） 351

IEC标准目录


开本页数

IEC 61000-6-2-1999 电磁兼容性(EMC).第6-2部分:一般标准.工业环境干扰Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrialenvironments

IEC 61000-6-3-1996电磁兼容性.第6部分:总标准.第6节:住宅区,工业和轻工业环

境用辐射标准

Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standardfor residential, commercial and light-industrial environments15P;A4

IEC 61000-6-4-1997电磁兼容性(EMC).第6部分:总规范.第4节:工业环境的辐射

标准

Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standardfor industrial environments17P;A4

IEC 61003-1-1991工业过程控制系统.模拟输入和两路或多路输出的仪器.第1部分:性能评定方法

Industrial-process control systems; instruments with analogue inputs and two- or multi-stateoutputs; part 1: methods of evaluating the performance59P;A4

IEC 61005-2003 辐射防护中用的仪器.中子环境剂量当量率计Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters80P;A4

IEC 61006-1991 测定电气绝缘材料玻璃化转变温度的试验方法

Methods of test for the determination of the glass transition temperature of electrical insulatingmaterials44P;A4

IEC 61007-1994 电信和电子设备用变压器和电感器.测量方法和试验规程Transformers and inductors for use in electronic and telecommunication equipment - Measuringmethods and test procedures117P;A4

IEC 61008-1 AMD 1-2002家用和类似用途的无集成过电流保护的剩余电流移动的断路器.修改件1

Residual current operated circuit-breakers without integral overcurrent protection for householdand similar uses (RCCBs) - Part 1: General rules; Amendment 115P;A4

IEC 61008-1-1996家用和类似用途的无整体过电流保护的剩余电流驱动式断路器(RCCB).第1部分:一般规则

Residual current operated circuit-breakers without integral overcurrent protection for householdand similar uses (RCCB`s) - Part 1: General rules241P;A4

IEC 61008-2-1-1990家用和类似用途的无整体过电流保护装置的剩余电流驱动式断路器(RCCB).第2部分第1节:一般规则对与线电压无关

的剩余电流驱动式断路器的适用性

Residual current operated circuit-breakers without integral overcurrent protection for householdand similar uses (RCCB`s); part 2-1: applicability of the general rules to RCCB`s functionallyindependent of line voltage7P;A4

IEC 61008-2-2-1990家用和类似用途的无整体过电流保护装置的剩余电流驱动式断路器(RCCB).第2部分第2节:一般规则对与线电压有关

的剩余电流驱动式断路器的适用性

Residual current operated circuit-breakers without integral overcurrent protection for householdand similar uses (RCCB`s); part 2-2: applicability of the general rules to RCCB`s functionallydependent on line voltage5P;A4

IEC 61009-1 AMD 1-2002家用和类似用途的有综合过电流保护的剩余电流断路器(RCBOs).第1部分:通则.修改件1

Residual current operated circuit-breakers with integral overcurrent protection for household andsimilar uses (RCBOs) - Part 1: General rules; Amendment 117P;A4

IEC 61009-1 Edition 2.1-2003家用和类似用途有整体式过载保护的剩余电流启动的断路器(RCBO).第1部分:总则

Residual current operated circuit-breakers with integral overcurrent protection for household andsimilar uses (RCBOs) - Part 1: General rules280P;A4

（231） 351

IEC标准目录


开本页数

IEC 61009-1-1996家用和类似用途的整体过电流保护的剩余电流驱动式断路器(RCBOs).第1部分:一般规则

Residual current operated circuit-breakers with integral overcurrent protection for household andsimilar uses (RCBOs) - Part 1: General rules275P;A4

IEC 61009-2-1-1991家用和类似用途整体式剩余电流启动的过载保护断路器(RCB0).第2部分第1节:一般规则在功能上与线电压无关的

RCBO中应用

Residual current operated circuit-breakers with integral overcurrent protection for household andsimilar uses (RCBO`s); part 2.1: applicability of the general rules to RCBO`s functionallyindependent of line voltage7P;A4

IEC 61009-2-2-1991家用和类似用途整体式剩余电流启动的过载保护断路器(RCB0).第2部分第2节:一般规则在功能上与线电压相关的

RCBO中应用

Residual current operated circuit-breakers with integral overcurrent protection for household andsimilar uses (RCBO`s); part 2.2: applicability of the general rules to RCBO`s functionallydependent on line voltage7P;A4

IEC 61010-031-2002测量、控制和实验室用电气设备的安全要求.第031部分:电气测量和试验用手提探测器装置安全要求

Safety requirements for electrical equipment for measurement, control and laboratory use - Part031: Safety requirements for hand-held probe assemblies for electrical measurement and test121P;A4

IEC 61010-1-2001测量、控制和实验室用电气设备的安全要求.第1部分:一般

要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part1: General requirements231P;A4

IEC 61010-2-010 AMD 1-1996测量、控制和实验室用电气设备的安全要求.第2-010部分:材料加热用实验室设备的特殊要求.补充件1

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-010: Particular requirements for laboratory equipment for the heating of materials; Amendment1

IEC 61010-2-010-1992测量、控制和试验室用电气设备的安全要求.第2-010部分:材料加热用实验室设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use; part2-010: particular requirements for laboratory equipment for the heating of materials35P;A4

IEC 61010-2-020 AMD 1-1996测量、控制和试验室用电气设备的安全要求.第2-020部分:实验室离心机特殊要求.补充件1

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-020: Particular requirements for laboratory centrifuges; Amendment 17P;A4

IEC 61010-2-020-1992测量、控制和试验室用电气设备的安全要求.第2-020部分:实验室离心机特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use; part2-020: particular requirements for laboratory centrifuges57P;A4

IEC 61010-2-032-2002测量、控制和试验室用电气设备的安全要求.第2-032部分:电气测量和试验用手持和用手控制电流感应器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-032: Particular requirements for hand-held and hand-manipulated current sensors for electricaltest and measurement37P;A4

IEC 61010-2-041-1995测量、控制和试验室用电气设备的安全要求.第2-041部分:医疗材料处理及实验室加工用蒸压器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-041: Particular requirements for autoclaves using steam for the treatment of medical materials,and for laboratory processes47P;A4

（232） 351

IEC标准目录


开本页数

IEC 61010-2-042-1997测量、控制和实验室用电气设备的安全要求.第2-042部分:使用毒气的实验室处理和医疗材料处理用高压釜和消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment ofmedical materials, and for laboratory processes59P;A4

IEC 61010-2-043-1997测量、控制和实验室用电气设备的安全要求.第2-043部分:使用热空气或热惰性气体的实验室处理和医疗材料处理用干热消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for thetreatment of medical materials, and for laboratory processes39P;A4

IEC 61010-2-045-2000测量、控制和实验室用电气设备的安全要求.第2-045部分:医疗、药用、兽医和实验室用洗涤器具消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-045: Particular requirements for washer disinfectors used in medical, pharmaceutical,veterinary and laboratory fields

IEC 61010-2-051-1995电气设备安全要求的测量,控制和实验室用.第2-051部分:实验室设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-051: Particular requirements for laboratory equipment for mixing and stirring17P;A4

IEC 61010-2-061-1995测量,控制和实验室用电气设备的安全要求.第2-061部分:实验室原子光谱测量计对热原子化和热电离测量的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization andionization

IEC 61010-2-081-2001测量、控制和试验室用电气设备的安全要求.第2-081部分:分析和其它用途的自动和半自动试验室设备的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use - Part2-081: Particular requirements for automatic and semi-automatic laboratory equipment foranalysis and other purposes37P;A4

IEC 61010-2-101-2002测量、控制和实验室用电气设备的安全要求.第2-101部分:实验室诊断(IVD)医疗设备的特殊要求

Safety requirements for electrical equipment for measurement, control and laboratory use - Part2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment43P;A4

IEC 61012-1990 在有超声情况下可听声测量用滤波器Filters for the measurement of audible sound in the presence of ultrasound13P;A4

IEC 61014-1989 可靠性增长程序Programmes for reliability growth61P;A4

IEC 61016 AMD 1-1999使用19mm磁带(格式D-1)的螺旋扫描数字式元件盒式录象

带录象系统.补充件1

Helical-scan digital component video cassette recording system using 19 mm magnetic tape(format D-1); Amendment 133P;A4

IEC 61016-1989使用19mm磁带(D-1格式)的螺旋扫描数字化器件盒式录象

带录象系统

Helical-scan digital component video cassette recording system using 19 mm magnetic tape(format D-1)167P;A4

IEC 61017-1-1991环境监测用的便携式可移动或可安装的X射线或γ射线测速

表.第1部分:测速表

Portable, transportable or installed X or gamma radiation ratemeters for environmentalmonitoring; part 1: ratemeters57P;A4

IEC 61017-2-1994辐射保护仪表.环境监测用的便携式可移动或可安装的X射线或γ射线测量表.第2部分:集成元件

Radiation protection instrumentation; portable, transportable or installed equipment to measure Xor gamma radiation for environmental monitoring; part 2: integrating assemblies55P;A4

（233） 351

IEC标准目录


开本页数

IEC 61018-1991便携式应急射线保护用高量程β射线、光子剂量和剂量率

仪器

High range beta and photon dose and dose rate portable instruments for emergency radiationprotection purposes39P;A4

IEC 61019-1-1-1990表面声波谐振器(SAW).第1部分:一般介绍,标准值和试验条

件.第1节:一般介绍和标准值

Surface acoustic wave (SAW) resonators; part 1: general information, standard values and testconditions; section I: general information and standard values29P;A4

IEC 61019-1-2-1993表面声波谐振器(SAW).第1部分:一般介绍、标准值和试验

条件.第2节:试验条件

Surface acoustic wave (SAW) resonators; part 1: general information, standard values and testconditions; section 2: test conditions35P;A4

IEC 61019-2-1995 表面声波(SWAW)谐振器.第2部分:使用指南Surface acoustic wave (SAW) resonators - Part 2: Guide to the use57P;A4

IEC 61019-3-1991 表面声波谐振器(SAW).第3部分:标准外形和引线连接Surface acoustic wave (SAW) resonators; part 3: standard outlines and lead connections22P;A4

IEC 61020-1-1991 电子设备用机电式开关.第1部分:总规范Electromechanical switches for use in electronic equipment; part 1: generic specification71P;A4

IEC 61020-2-1-1991电子设备用机电式开关.第2部分:旋转开关的分规范.第1节:空白详细规范

Electromechanical switches for use in electronic equipment; part 2: sectional specification forrotary switches; section 1: blank detail specification19P;A4

IEC 61020-2-1991 电子设备用机电式开关.第2部分:旋转开关的分规范Electromechanical switches for use in electronic equipment; part 2: sectional specification forrotary switches27P;A4

IEC 61020-2-2-1994电子设备用机电式开关.第2部分:旋转开关的分规范.第2节:中央悬挂,12位,17mm直径的旋转开关详细规范

Electromechanical switches for use in electronic equipment - Part 2: Sectional specification forrotary switches - Section 2: Detail specification for rotary switches with central mounting, 12positions, 17 mm diameter33P;A4

IEC 61020-3-1-1991电子设备用机电式开关.第3部分:直插式封装开关的分规范.第1节:空白详细规范

Electromechanical switches for use in electronic equipment; part 3: sectional specification for in-line package switches; section 1: blank detail specification19P;A4

IEC 61020-3-1991 电子设备用机电式开关.第3部分:线路封装开关的分规范Electromechanical switches for use in electronic equipment; part 3: sectional specification for in-line package switches27P;A4

IEC 61020-3-2-1995电子设备用机电式开关.第3部分:直插式封装开关的分规范.第2节:双列直插式组件、开关、上下可调节振动器的详细

规范

Electromechanical switches for use in electronic equipment - Part 3: Sectional specification for in-line package switches - Section 2: Detail specification for dual in-line package (DIP), switches,raised and recessed rocker actuated29P;A4

IEC 61020-4-1-1991电子设备用机电式开关.第4部分:杠杆操纵搬扭开关的分规

范.第1节:空白详细规范

Electromechanical switches for use in electronic equipment; part 4: sectional specification forlever (toggle) switches; section 1: blank detail specification19P;A4

（234） 351

IEC标准目录


开本页数

IEC 61020-4-1991电子设备用机电式开关.第4部分:杠杆操纵搬扭开关的分规

范

Electromechanical switches for use in electronic equipment; part 4: sectional specification forlever (toggle) switches23P;A4

IEC 61020-4-2-1995

电子设备用机电式开关.第4部分:杠杆操纵拨动开关的分规

范.第2节: 大交流电压为227伏、大直流电压为30伏、

大电流为20安培的额定电功率，一极、二极、四极密封

杠杆操作拨动开关详细规范

Electromechanical switches for use in electronic equipment - Part 4: Sectional specification forlever (toggle) switches - Section 2: Detail specification for one pole, two pole, four pole, sealedlever (toggle) switches, 277 V a.c. maximum, 30 V d.c. maximum, 20 A maximum electrical rating61P;A4

IEC 61020-5-1-1991电子设备用机电式开关.第5部分:按钮开关的分规范.第1节:空白详细规范

Electromechanical switches for use in electronic equipment; part 5: sectional specification forpushbutton switches; section 1: blank detail specification19P;A4

IEC 61020-5-1991 电子设备用机电式开关.第5部分:按钮开关的分规范Electromechanical switches for use in electronic equipment; part 5: sectional specification forpushbutton switches37P;A4

IEC 61020-6-1-1991电子设备用机电式开关.第6部分:微动开关的分规范.第1节:空白详细规范

Electromechanical switches for use in electronic equipment; part 6: sectional specification forsensitive switches; section 1: blank detail specification19P;A4

IEC 61020-6-1991 电子设备用机电式开关.第6部分:微动开关的分规范Electromechanical switches for use in electronic equipment; part 6: sectional specification forsensitive switches27P;A4

IEC 61020-6-2-1994电子设备用的机电开关.第6部分:敏感开关分规范.第2节:额定大电压250V, 大电流5A的单级不密封超小型开关的

详细规范

Electromechanical switches for use in electronic equipment - Part 6: Sectional specification forsensitive switches - Section 2: Detail specification for one pole, unsealed subminiature sensitiveswitches, 250 V maximum, 5 A maximum electrical rating43P;A4

IEC 61021-1-1990电信和电气设备用的变压器和电感器的叠片铁心包.第1部分:尺寸

Laminated core packages for transformers and inductors used in telecommunication andelectronic equipment; part 1: dimensions13P;A4

IEC 61021-2-1995电信和电气设备用的变压器和电感器的叠片铁心包.第2部分:用YEE 2叠片铁芯的电器性能

Laminated core packages for transformers and inductors for use in telecommunication andelectronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations25P;A4

IEC 61023-1999航海和无线电传输设备和系统.航海速度和距离的测量设备

(SDME).性能要求.试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Marine speed anddistance measuring equipment (SDME) - Performance requirements - Methods of testing andrequired test results12P;A4

IEC 61024-1-1-1993建筑物的雷电保护.第1部分:总则.第1节:导则A:防雷击系统

保护等级的选择

Protection of structures against lightning; part 1: general principles; section 1: guide A: selectionof protection levels for lightning protection systems43P;A4

IEC 61024-1-1990 建筑物的雷电防护.第1部分:总则Protection of structures against lighting; part 1: general principles47P;A4

IEC 61024-1-2-1998建筑物的雷电保护.第1-2部分:总则.第1节:导则B:防雷击保

护系统级的设计,安装,维护,检验

Protection of structures against lightning - Part 1-2: General principles - Guide B - Design,installation, maintenance and inspection of ligthning protection systems

（235） 351

IEC标准目录


开本页数

IEC 61025-1990 故障树型分析法(FTA)Fault tree analysis (FTA)39P;A4

IEC 61027-1991 听觉声阻/听觉声导纳的测量仪器Instruments for the measurement of aural acoustic impedance/admittance41P;A4

IEC 61028 AMD 1-1995 电工测量仪器.X-Y型记录仪.第1次修改Electrical measuring instruments - X-Y-recorders; Amendment 15P;A4

IEC 61028 AMD 2-1997 电工测量仪器.X-Y记录仪.第2次修订Electrical measuring instruments - X-Y recorders; Amendment 23P;A4

IEC 61028-1991 电工测量仪器.X-Y记录仪Electrical measuring instruments; X-Y recorders59P;A4

IEC 61029-1-1990 可移动马达控制的电动机床的安全装置.第1部分:一般要求Safety of transportable motor-operated electric tools; part 1: general requirements182P;A4

IEC 61029-2-1 AMD 1-1999可移动电动机具的安全.第2-1部分:园盘锯的特殊要求.修改

1

Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements forcircular saws; Amendment 13P;A4

IEC 61029-2-1 AMD 2-2001可移动电动机具的安全.第2-1部分:园盘锯的特殊要求.修改

2

Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements forcircular saws; Amendment 23P;A4

IEC 61029-2-10-1998可移动马达控制的电动机床的安全装置.第2-10部分:切割

研磨机的特殊要求

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements forcutting-off grinders17P;A4

IEC 61029-2-11-2001 移动式电动工具的安全.第2-11部分:斜面长锯的特殊要求.Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements formitre-bench saws19P;A4

IEC 61029-2-1-1993 可移动电动机具的安全.第2部分:圆盘锯的特殊要求Safety of transportable motor-operated electric tools; part 2: particular requirements for circularsaws

IEC 61029-2-2-1993可移动电动机具的安全要求.第2部分第2节:旋臂锯的特殊

要求

Safety of transportable motor-operated electric tools; part 2: particular requirements for radialarm saws21P;A4

IEC 61029-2-3 AMD 1-2001移动式电动工具的安全.第2-3部分:刨和刨板机的特殊要求.修改件1

Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements forplaners and thicknessers; Amendment 13P;A4

IEC 61029-2-3-1993可移动电动机具的安全要求.第2部分第3节:刨床和刨板机

的特殊要求

Safety of transportable motor-operated electric tools; part 2: particular requirements for planersand thicknessers28P;A4

IEC 61029-2-4 AMD 1-2001移动式电动工具的安全.第2-4部分:台式研磨机的特殊要求.修改件1

Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for benchgrinders; Amendment 19P;A4

IEC 61029-2-4-1993 可移动电动机具的安全要求.第2部分第4节:台式磨床的特

殊要求

Safety of transportable motor-operated electric tools; part 2: particular requirements for benchgrinders

（236） 351

IEC标准目录


开本页数

IEC 61029-2-5 AMD 1-2001 移动式电动工具的安全.第2-5部分:带锯的特殊要求.修改1Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for bandsaws; Amendment 13P;A4

IEC 61029-2-5-1993 可移动电动机具的安全.第2-5部分:带锯的特殊要求Safety of transportable motor-operated electric tools; part 2: particular requirements for bandsaws

IEC 61029-2-6-1993可移动电动机具的安全要求.第2部分第6节:水冷金刚石钻

头的特殊要求

Safety of transportable motor-operated electric tools; part 2: particular requirements for diamonddrills with water supply17P;A4

IEC 61029-2-7-1993可移动电动机具的安全要求.第2部分第7节:水冷金刚石锯

的特殊要求

Safety of transportable motor-operated electric tools; part 2: particular requirements for diamondsaws with water supply17P;A4

IEC 61029-2-8 AMD 1-1999可移动马达控制的电动机床的安全装置.第2-8部分:单心轴

垂直模压器的特殊要求.补充件1

Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for singlespindle vertical moulders; Amendment 13P;A4

IEC 61029-2-8 AMD 2-2001可移动马达控制的电动机床的安全.第2-8部分:单心轴垂直

模具的特殊要求.修改件2

Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for singlespindle vertical moulders; Amendment 23P;A4

IEC 61029-2-8-1995可移动马达控制的电动机床的安全装置.第2部分:单芯轴特

殊要求.垂直模压机

Safety of transportable motor-operated electric tools - Part 2: Particular requirements for singlespindle vertical moulders41P;A4

IEC 61029-2-9-1995 可移动电动机具的安全.第2部分:斜面锯特殊要求Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitresaws

IEC 61030 AMD 1-1993 音频、视频和视听系统.家用数字总线.修改件1Audio, video and audiovisual systems; domestic digital bus (D2B); amendment 123P;A4

IEC 61030-1991 音频、视频及视听系统.家用数字式总线Audio, video and audiovisual systems; domestic digital bus (D2B)133P;A4

IEC 61031-1990在正常操作和预料使用偶发事件中,核发电厂使用的γ射线

辐射面积放射线量率监控设备的设计、安装和应用准则

Design, location and application criteria for installed area gamma radiation dose rate monitoringequipment for use in nuclear power plants during normal operation and anticipated operationaloccurrences21P;A4

IEC 61032-1997 用外壳对人体和设备进行保护.检验用探针Protection of persons and equipment by enclosures - Probes for verification51P;A4

IEC 61033-1991 浸渍剂对漆包线底衬的附着强度的测定试验方法

Test methods for the determination of bond strength of impregnating agents to an enamelled wiresubstrate24P;A4

IEC 61034-1-1997 在给定条件下电缆燃烧烟浓度测量.第1部分:试验仪表Measurement of smoke density of cables burning under defined conditions - Part 1: Testapparatus

IEC 61034-2-1997给定条件下电缆燃烧烟浓度的测量.第2部分:试验过程和要

求

Measurement of smoke density of cables burning under defined conditions - Part 2: Testprocedure and requirements17P;A4

（237） 351

IEC标准目录


开本页数

IEC 61035-1-1990 电气设备的导管部件规范.第1部分:一般要求Specification for conduit fittings for electrical installations; part 1: general requirements45P;A4

IEC 61035-2-1-1993电气设备的导管部件规范.第2部分:特殊规范.第1节:金属导

管配件

Specification for conduit fittings for electrical installations; part 2: particular specifications; section1: metal conduit fittings21P;A4

IEC 61035-2-2-1993电气设备的导管部件规范.第2部分:特殊规范.第2节:绝缘材

料导管配件

Specification for conduit fittings for electrical installations; part 2: particular specifications; section2: conduit fittings of insulating material22P;A4

IEC 61035-2-3-1993电气设备的导管部件规范.第2部分:特殊规范:第3节:金属、

绝缘或复合材料软电缆管附件

Specification for conduit fittings for electrical installations; part 2: particular specifications; section3: fittings for flexible conduits of metal, insulating or composite materials and for pliable conduitsof metal or composite materials22P;A4

IEC 61035-2-4-1995电气设备的导管部件规范.第2部分:特殊规范.第4节:铝合金

导管配件

Specification for conduit fittings for electrical installations - Part 2: Particular specifications -Section 4: Conduit fittings of aluminium alloy19P;A4

IEC 61037 Edition 1.2-1998 电表.计费和负载控制.电脉动控制接收装置的特殊要求Electricity metering - Tariff and load control - Particular requirements for electronic ripple controlreceivers83P;A4

IEC 61037-1998电气测量.资费和负载控制.电子脉动控制接受装置的特殊

要求

Electricity metering - Tariff and load control - Particular requirements for electronic ripple controlreceivers83P;A4

IEC 61038 Edition 1.2-1998 电表.计费和负载控制.时间开关的特殊要求Electricity metering - Tariff and load control - Particular requirements for time switches65P;A4

IEC 61038-1998 电表.计费和负载控制.时间开关的特殊要求Electricity metering - Tariff and load control - Particular requirements for time switches65P;A4

IEC 61039-1990 绝缘液体的普通分类法General classification of insulating liquids11P;A4

IEC 61040-1990 激光辐射功率和能量测量用探测器、仪器和设备Power and energy measuring detectors, instruments and equipment for laser radiation31P;A4

IEC 61041-1-1990非播放用录像机.测量方法.第1部分:一般视频(NTSC/PAL)和声频(纵向)特性

Non-broadcast video tape recorders; methods of measurement; part 1: general video(NTSC/PAL) and audio (longitudinal) characteristics67P;A4

IEC 61041-2-1994非播放用录像机.测量方法.第2部分:SECAM 录像机色度特

性

Non-broadcast video tape recorders - Methods of measurement - Part 2: Video characteristicschrominance SECAM27P;A4

IEC 61041-3-1993非播放用录像机的测量方法.第3部分:用FM制式录音用声

频特性

Non-broadcast videotape recorders; methods of measurement; part 3: audio characteristics forFM recording49P;A4

（238） 351

IEC标准目录


开本页数

IEC 61041-4-1997非广播用录像机.测量方法.第4部分:测试带

(NTSC/PAL/SECAM)

Non-broadcast video tape recorders - Methods of measurement - Part 4: Calibration tape(NTSC/PAL/SECAM)39P;A4

IEC 61041-5-1997非广播用磁带录像机的测量方法.第5部分:包括那些装配有

Y/C图象连接器(NTSC/PAL)在内的高频带磁带录像机

Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video taperecorders, including those equipped with Y/C video connectors (NTSC/PAL)61P;A4

IEC 61043-1993 电声学.声强测量仪.测量用双压力传感传声器Electroacoustics; instruments for the measurement of sound intensity; measurement with pairs ofpressure sensing microphones69P;A4

IEC 61045-1-1991 电子设备用的固定薄膜电阻器网络.第1部分:总规范Fixed film resistors networks for use in electronic equipment; part 1: generic specification89P;A4

IEC 61045-2-1-1991电子设备用的固定薄膜电阻器网络.第2部分第1节:在可验

收规程基础上质量评定薄膜电阻器网络的空白详细规范.E级评定

Fixed film resistor networks for use in electronic equipment; part 2: blank detail specification forfilm resistor networks of assessed quality on the basis of the capability approval procedure;assessment level E27P;A4

IEC 61045-2-1991电子设备用的固定薄膜电阻器网络.第2部分:在可验收程序

的基础上评定质量的薄膜电阻器网络的分规范

Fixed film resistor networks for use in electronic equipment; part 2: sectional specification for filmresistor networks of assessed quality on the basis of the capability approval procedure101P;A4

IEC 61047 AMD 1-1996白热丝灯直流或交流供电电子降压换流器.性能要求.第1次修改

D.C. or a.c. supplied electronic step-down convertors for filament lamps - Performancerequirements; Amendment 15P;A4

IEC 61047 AMD 2-2001 白炽灯用直流或交流降压变换器.性能要求.修改件2D.C. or a.c. supplied electronic step-down convertors for filament lamps - Performancerequirements; Amendment 25P;A4

IEC 61047 Edition 1.2-2001 白炽灯用直流或交流电子降压转换器.性能要求D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performancerequirements

IEC 61047-1991 白热丝灯直流或交流供电电子降压换流器.性能要求D.C. or a.c. supplied electronic step-down convertors for filament lamps; performancerequirements

IEC 61048 AMD 1-1995灯具附件.用于管状荧光灯和其它放电灯具电路的电容器.一般和安全要求.修改件1

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits- General and safety requirements; Amendment 17P;A4

IEC 61048 AMD 2-1999灯具附件.用于管状荧光灯和其它放电灯具电路的电容器.一般和安全要求.修改件2

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits- General and safety requirements; Amendment 2

IEC 61048 Edition 1.2-1999电灯附件.管型荧光灯和其它放电电路电容器.一般和安全

要求

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits- General and safety requirements57P;A4

IEC 61048-1991管状荧光灯和其它放电灯具电路中用的电容器.一般和安全

要求

Capacitors for use in tubular fluorescent and other discharge lamp circuits; general and safetyrequirements49P;A4

（239） 351

IEC标准目录


开本页数

IEC 61049-1991 管形荧光灯和其它放电灯电路中用的电容器.性能要求Capacitors for use in tubular fluorescent and other discharge lamp circuits; performancerequirements

IEC 61050 AMD 1-1994 第1次补充Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V(generally called neon-tranformers) - General and safety requirements; Amendment 15P;A4

IEC 61050-1991无载输出过电压超过100KV的管形放电灯的变压器.(一般

叫做氖变压器)一般要求和安全要求

Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 kV(generally called neon-transformers); general and safety requirements71P;A4

IEC 61051-1-1991 电子设备用可变电阻器.第1部分:总则Varistors for use in electronic equipment; part 1: generic specification63P;A4

IEC 61051-2-2-1991电子设备用可变电阻器.第2部分第2节:氧化锌浪涌抑制可

变电阻空白详细规范.E级评定

Varistors for use in electronic equipment; part 2: blank detail specification for zinc oxide surgesupression varistors; assessment level E25P;A4

IEC 61052-1991IEC 1052 FASTBUS标准程序.和FASTBUS数据探测系统

一起使用的标准程序

IEC 1052 FASTBUS standard routines; standard routines for use with FASTBUS data acquisitionsystems111P;A4

IEC 61053-1-1991按B型格式用12.65mm(0.5in)磁带螺旋扫描录相机磁带盒

系统.调频录音.第1部分:525行-50字段体系

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type betaformat; FM audio recording; part 1: 625 line-50 field systems21P;A4

IEC 61053-2-1991按B型格式用12.65mm(0.5in)磁带螺旋扫描录相机磁带盒

系统.调频录音.第2部分:525行-60字段体系

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type betaformat; FM audio recording; part 2: 525 line-60 field systems19P;A4

IEC 61056-1-2002通用铅酸蓄电池组(阀门调节型).第1部分:一般要求、功能

特性.试验方法

General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements,functional characteristics; Methods of test33P;A4

IEC 61056-2-2002通用铅酸蓄电池组(阀门调节型).第2部分:尺寸、端子和标

记

General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals andmarking23P;A4

IEC 61057-1991 带电作业用带绝缘杆的天线设备Aerial devices with insulating boom used for live working115P;A4

IEC 61058-1 AMD 1-2001 设备开关.第1部分:一般要求.修改件1Switches for appliances - Part 1: General requirements; Amendment 115P;A4

IEC 61058-1 Edition 3.1-2001 设备开关.第1部分:一般要求 Switches for appliances - Part 1: General requirements

IEC 61058-1-2000 设备开关.第1部分:一般要求Switches for appliances - Part 1: General requirements318P;A4

IEC 61058-2-1 AMD 1-1995 设备开关.第2-1部分:拉线开关的特殊要求.修改件1Switches for appliances - Part 2-1: Particular requirements for cord switches; Amendment 119P;A4

IEC 61058-2-1-1992 设备开关.第2-1部分:拉线开关的特殊要求Switches for appliances; part 2-1: particular requirements for cord switches39P;A4

（240） 351

IEC标准目录


开本页数

IEC 61058-2-4 AMD 1-2003电器开关.第2-4部分:针对独立安装开关的特殊要求.修改件

1

Switches for appliances - Part 2-4: Particular requirements for independently mounted switches;Amendment 112P;A4

IEC 61058-2-4-1995 电器开关.第2部分第4节:针对独立安装开关的特殊要求Switches for appliances - Part 2-4: Particular requirements for independently mounted switches43P;A4

IEC 61058-2-5-1994 设备开关.第2-5部分:转换选择开关的特殊要求Switches for appliances - Part 2-5: Particular requirements for change-over selectors17P;A4

IEC 61061-1-1998电气用非浸渍致密层压板规范.第1部分:定义、名称牌号及

一般要求

Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions,designation and general requirements13P;A4

IEC 61061-2 AMD 1-2001电气设备用非浸渍致密层压板规范.第2部分:试验方法.修改

件1

Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2:Methods of test; Amendment 17P;A4

IEC 61061-2 Edition 1.1-2001 电气设备用非浸渍致密层压板规范.第2部分:试验方法Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2:Methods of test29P;A4

IEC 61061-2-1992 电气设备用非浸渍致密层压板规范.第2部分:试验方法Specification for non-impregnated, densified laminated wood for electrical purposes; part 2:methods of test26P;A4

IEC 61061-3-1-1998电气用途的非浸渍致密层压板规范.第3部分:单独材料规范.第1节:由山毛榉胶合板制成的片材制品

Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications forindividual materials - Sheet 1: Sheets produced from beech veneer11P;A4

IEC 61061-3-2-2001电气用非浸渍致密层压板规范.第3部分:单项材料规范.活页

2:由毛榉木薄板制成的圆材

Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications forindividual materials; Sheet 2: Rings produced from beech veneer11P;A4

IEC 61063-1991 声学.由蒸汽轮机和被驱动的机器发出的空载噪音的测量Acoustics; measurement of airborne noise emitted by steam turbines and driven machinery39P;A4

IEC 61064-1991 蒸汽轮机速度控制系统的验收试验Acceptance tests for steam turbine speed control systems59P;A4

IEC 61065-1991 老化后的矿物绝缘油的低温流动性的评定方法Method for evaluating the low temperature flow properties of mineral insulating oils after ageing15P;A4

IEC 61066-1991 个人和环境监控用热致发光剂量测定系统Thermoluminescence dosimetry systems for personal and environmental monitoring107P;A4

IEC 61067-1-1991玻璃和玻璃聚酯纤维机织带的规范.第1部分:定义、分类和

一般要求

Specification for glass and glass polyester fibre woven tapes; part 1: definitions, classificationand general requirements15P;A4

IEC 61067-2-1992 玻璃和玻璃聚酯纤维机织带的规范.第2部分:试验方法Specification for glass and glass polyester fibre woven tapes; part 2: methods of test17P;A4

（241） 351

IEC标准目录


开本页数

IEC 61067-3-1-1995玻璃和玻璃聚酯纤维机织带的规范.第3部分:专用材料规范.第1活页:1,2,3型织带

Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials -Sheet 1: Type 1, 2 and 3 tapes15P;A4

IEC 61068-1-1991 聚酯纤维机织带的规范.第1部分:定义、名称牌号和一般要

求

Specification for polyester fibre woven tapes; part 1: definitions, designation and generalrequirements

IEC 61068-2-1991 聚酯纤维机织带的规范.第2部分:试验方法Specification for polyester fibre woven tapes; part 2: methods of test11P;A4

IEC 61068-3-1-1995聚酯纤维机织带.第3部分:专用材料规范.第1活页:常规的或

无梭织机编织带

Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapeswoven on conventional or shuttleless looms9P;A4

IEC 61069-1-1991工业流程测量和控制.系统鉴定用装置性能的估价.第1部分:一般条件和方法

Industrial-process measurement and control; evaluation of system properties for the purpose ofsystem assessment; part 1: general considerations and methodology41P;A4

IEC 61069-2-1993工业处理测量和控制.系统评定用系统特性估定.第2部分:评定方法

Industrial-process measurement and control; evaluation of system properties for the purpose ofsystem assessment; part 2: assessment methodology35P;A4

IEC 61069-3-1996工业流程测量和控制.系统评定用系统性能的评价.第3部分:系统功能度的评价

Industrial-process measurement and control - Evaluation of system properties for the purpose ofsystem assessment - Part 3: Assessment of system functionality51P;A4

IEC 61069-4-1997工业流程测量和控制.系统鉴定用装置性能的估价.第4部分:系统性能评估

Industrial process measurement and control - Evaluation of system properties for the purpose ofsystem assessment - Part 4: Assessment of system performance69P;A4

IEC 61069-5-1994工业处理测量和控制.系统评定用系统特性估定.第5部分:系统可靠性评定

Industrial-process measurement and control - Evaluation of system properties for the purpose ofsystem assessment - Part 5: Assessment of system dependability61P;A4

IEC 61069-6-1998工业流程测量和控制.系统鉴定用装置性能的估价.第6部分:系统可操作性的评估

Industrial-process measurement and control - Evaluation of system properties for the purpose ofsystem assessment - Part 6: Assessment of system operability49P;A4

IEC 61069-7-1999工业流程测量和控制.系统评定用系统性能的评价.第7部分:系统安全的评定

Industrial-process measurement and control - Evaluation of system properties for the purpose ofsystem assessment - Part 7: Assessment of system safety37P;A4

IEC 61069-8-1999工业流程测量和控制.系统鉴定用装置性能的估价.第8部分:非任务相关系统的性能评估

Industrial-process measurement and control - Evaluation of system properties for the purpose ofsystem assessment - Part 8: Assessment of non-task-related system properties61P;A4

IEC 61070-1991 稳态可用性性能审核试验程序Compliance test procedures for steady-state availability52P;A4

IEC 61071-1-1991 补偿电容器.第1部分:总则Power electronic capacitors; part 1: general67P;A4

（242） 351

IEC标准目录


开本页数

IEC 61073-1-1999 光纤和光缆的机械接头和熔融接头防护器.第1部分:总规范Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Genericspecification49P;A4

IEC 61073-3-1993 光纤和光缆的接头.第3部分:分规范:光纤和光缆的熔焊接头Splices for optical fibres and cables; part 3: sectional specification: fusion splices for optical fibresand cables77P;A4

IEC 61075-1991船用劳兰接收机. 小功能的标准.试验方法和所需试验结

果

Loran-C receivers for ships; minimum performance standards; methods of testing and requiredtest results45P;A4

IEC 61076-1 AMD 1-1996直流低频率模拟及高速数据数字系统用的已进行过质量评定的连接器.第1部分:总规范.修改件1

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital highspeed data applications - Part 1: Generic application - Capability approval; Amendment 119P;A4

IEC 61076-1 AMD 2-2001直流低频模拟及高速数据数字系统用的经过质量评定的连接器.第1部分:总规范.能力鉴定.修改件2

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital highspeed data applications - Part 1: Generic application; Capability approval; Amendment 25P;A4

IEC 61076-1-1995有质量评定的直流低频模拟及数字高速数据应用系统用连接器.第1部分:总规范

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital highspeed data applications - Part 1: Generic specification49P;A4

IEC 61076-2-001-2001 电气设备连接器.第2-001部分:圆形连接器.空白详细规范Connectors for electronic equipment - Part 2-001: Circular connectors; Blank detail specification137P;A4

IEC 61076-2-102-2002电气设备连接器.第2-102部分:经质量评定的圆形连接器.外部低电压电源用插头和插座的分规范

Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality;Detail specification for plugs and jacks for external low voltage power supply61P;A4

IEC 61076-2-1998直流低频模拟及高速数据系统用连接器.第2部分:经质量评

定的圆形连接器.分规范

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part2: Circular connectors with assessed quality - Sectional specification51P;A4

IEC 61076-3-001-1999直流低频模拟及高速数据数字系统用连接器.第3-001部分:经质量评定的矩形连接器.空白详细规范

Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -Part 3-001: Rectangular connectors with assessed quality - Blank detail specification62P;A4

IEC 61076-3-100-1999直流低频模拟及高速数据数字系统用的已经过质量评定的连接器.第3-100部分:矩形连接器.带有1.27mm双低不可拆

卸矩形触点及梯形外壳的屏蔽连接器作用范围的详细规范

Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part3-100: Rectangular connectors with assessed quality - Detail specification for a range of shieldedconnectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mmdouble row

IEC 61076-3-101-1997

直流低频率模拟及高速数据数字系统用的具有质量认证的连接器.第3部分:矩形连接器.第101节:带有

1.27mmx2.54mm中心线上的不可拆卸矩形触点及梯形外

壳的屏蔽连接器作用范围的详细规范

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for arange of shielded connectors with trapezoidal shaped shells and non-removable rectangularcontacts on a 1,27 mm ?2,54 mm centre-line

IEC 61076-3-1999直流低频模拟及高速数据数字系统用的连接器.第3部分:经质量评定的矩形连接器.分规范

Connectors for use in d.c., low-frequency analogue and digital high-speed data applications -Part 3: Rectangular connectors with assessed quality - Sectional specification22P;A4

（243） 351

IEC标准目录


开本页数

IEC 61076-4-001-1996直流低频模拟设备和数字高速数据应用设备用已审定质量的插头座.第4部分:印制电路板插头座.第001节:空白详细规

范

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detailspecification

IEC 61076-4-100-2001电气设备连接器.第4-100部分:印刷电路板用连接器.印刷电

路板及底板用带有2.5mm(0.098in)格栅的两部分连接器模

数的详细规范

Connectors for electronic equipment - Part 4-100: Printed board connectors with assessedquality; Detail specification for two-part connector modules having a grid of 2,5 mm for printedboards and backplanes137P;A4

IEC 61076-4-101-2001电子设备用连接器.第4-101部分:经质量认证的印刷电路板

用连接器.符合IEC 60917的印刷电路板及底板用带有

2.0mm格栅的两部分连接器模数的详细规范

Connectors for electronic equipment - Part 4-101: Printed board connectors with assessedquality; Detail specification for two-part connector modules, having a basic grid of 2,0 mm forprinted boards and backplanes in accordance with IEC 60917197P;A4

IEC 61076-4-102-1997

直流低频率模拟及高速数据数字系统用已进行过质量评定的连接器.第4部分:印制电路板联接器.第102节:带前定心,编码和预配合部件的米制多用途插件用双部分单极联接器的祥细规格

Connectors with assessed quality for use in d.c., low-frequency analogue and in digital highspeed data applications - Part 4: Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding andearly mating features, having a metric grid in accordance with IEC 6091767P;A4

IEC 61076-4-103-1999直流低频模拟及高速数据数字系统用连接器.第4-103部分:经质量评定的印制电路板连接器.带外壳和2.5mm基栅的双

面连接器

Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part4-103: Printed board connectors with assessed quality - Detail specification for two-partconnectors with shielding and a basic grid of 2,5 mm127P;A4

IEC 61076-4-104-1999直流电用的低频模拟和数字高速应用的连接器.第4-104部分: 已评估质量的印制板连接器.两部分调模器连接器的详

细规范.带有在0,5MM多重栅极终端的2.0MM基本栅极

Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part4-104: Printed board connectors with assessed quality - Detail specification for two-part modularconnectors, basic grid of 2,0 mm, with terminations on an multiple grid of 0,5 mm143P;A4

IEC 61076-4-105-1995

直流低频率模拟及高速数据数字系统用的已进行过质量评定的连接器.第4部分:印制电路用连接器.第105节:用途广泛

的(包括电信和音频工业)的带有3至8个接点的9MM圆形连

接器的详细规范

Connectors with assessed quality for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed boards connectors - Section 105: Detail specification for9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including thetelecommunication and audio industry89P;A4

IEC 61076-4-107-2001

电子设备用连接器.第4-107部分:经质量评定的印制板连接

器.基本网格为2.0mm有屏蔽的两件式连接器详细规范,固定件带有焊接和压入接端,活动件带有不可接触的隔离位移

和压接接端

Connectors for electronic equipment - Part 4-107: Printed board connectors with assessedquality; Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixedpart with solder and press-in terminations for printed boards, free part with non-accessibleinsulation displacement and crimp terminations87P;A4

IEC 61076-4-108-2002

电子设备连接器.第4-108部分:有质量评定的印制板连接器.符合IEC 60917-1的基本网格为2.5mm、有25mm模数间距

和集成屏蔽功能、可用于15mm横向包装密度的电缆与板

的连接器的详细规范

Connectors for electronic equipment - Part 4-108: Printed board connectors with assessedquality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm andintegrated shielding function, applicable for transverse packing density of 15 mm, having a basicgrid of 2,5 mm in accordance with IEC 60917-171P;A4

（244） 351

IEC标准目录


开本页数

IEC 61076-4-110-2001电子设备用连接器.第4-110部分:有质量评定的印制板连接

器.基本网格为2.0mm并具有完全屏蔽和锁定功能的锁定电

连接器系统详细规范

Connectors for electronic equipment - Part 4-110: Printed board connectors with assessedquality; Detail specification for latched cable connector system having a basic grid of 2,0 mmincluding full shielding and latching function111P;A4

IEC 61076-4-111-2002电子设备连接器.第4-111部分:有质量评定的印制板连接器.符合IEC 60917-1的基本网格为2.5mm、有预插合特性的

印制板和背板用两件式连接器组件的详细规范

Connectors for electronic equipment - Part 4-111: Printed board connectors with assessedquality; Detail specification for two-part power connector modules, for printed boards andbackplanes having early mating features, and having a basic grid of 2,5 mm in accordance withIEC 60917-1

IEC 61076-4-113-2002电子设备连接器.印制板连接器.第4-113部分:总线装置中印

制板和背板用格栅为2.5mm的5列两件式连接器的详细规

范

Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specificationfor two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes inbus applications36P;A4

IEC 61076-4-114-2003电子设备连接器.第4-114部分:印制板连接器.格栅为1mm x1.5mm的有整体屏蔽功能的两件式连接器详细规范

Connectors for electronic equipment - Part 4-114: Printed board connectors; Detail specificationfor two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm50P;A4

IEC 61076-4-115-2003电子设备连接器.第4-115部分:印制板连接器.InfiniBand装置用背板连接器

Connectors for electronic equipment - Part 4-115: Printed board connectors; Backplaneconnector for InfiniBand equipment142P;A4

IEC 61076-4-1995有质量评定的直流低频模拟及数字高速数据应用系统用连接器.第4部分:印制板连接器分规范

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors43P;A4

IEC 61076-5-2001直流低频模拟及高速数据数字设备用连接器.第5部分:经质

量评定的串联插座.分规范

Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part5: In-line sockets with assessed quality; Sectional specification61P;A4

IEC 61076-7-2000直流低频率模拟及高速数据数字设备用的连接器.第7部分:已进行过质量评定包括资格和能力验收的电缆输出附件.分规范

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part7: Cable outlet accessories with assessed quality, including qualification and capability approval -Sectional specification37P;A4

IEC 61077-1991 VHS型12.65mm(0.5in)磁带的螺旋扫描录象磁带盒系统Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS;compact VHS video cassette45P;A4

IEC 61078-1991 可靠性分析技术.可靠性方框图法Analysis techniques for dependability; reliability block diagram method57P;A4

IEC 61079-1-199212GHz频带卫星广播接收机的测量方法.第1部分:露天设备

的射频测量

Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band;part 1: radio-frequency neasurements on outdoor units85P;A4

IEC 61079-2-199212GHz频带卫星广播接收机的测量方法.第2部分:DBS调谐

设备的电气测量

Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band;part 2: electrical measurements on DBS tuner units105P;A4

（245） 351

IEC标准目录


开本页数

IEC 61079-3-199312GHz频带卫星广播接收机的测量方法.第3部分:接收天线

系统包括户外装置和DBS调谐装置总性能的电测量

Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band;part 3: electrical measurements of overall performance of receiver systems comprising anoutdoor unit and a DBS tuner unit45P;A4

IEC 61079-4-199312GHz频带卫星广播接收机的测量方法.第4部分:NTSC制

式数字副载波系统

Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band;part 4: electrical measurements on sound/data decoder units for the digital subcarrier NTSCsystem

IEC 61079-5-199312GHz频带卫星广播接收机的测量方法.第5部分:MAC/包系统的译码器单元的测量方法

Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band;part 5: electrical measurements on decoder units for MAC/packet systems149P;A4

IEC 61080-1991 石英晶体装置等效电参数的测量指南Guide to the measurement of equivalent electrical parameters of quartz crystal units97P;A4

IEC 61082-1 AMD 1-1995 电工技术使用的文件的制订.第1部分:一般要求.第1次修改Preparation of documents used in electrotechnology - Part 1: General requirements; Amendment1

IEC 61082-1 AMD 2-1996 电工技术使用的文件的制订.第1部分:一般要求.补充件2Preparation of documents used in electrotechnology - Part 1: General requirements; Amendment2

IEC 61082-1-1991 电工技术使用的文件的制订.第1部分:一般要求Preparation of documents used in electrotechnology; part 1: general requirements157P;A4

IEC 61082-2-1993 电工技术使用的文件的制订.第2部分:定位函数图Preparation of documents used in electrotechnology; part 2: function-oriented diagrams141P;A4

IEC 61082-3-1993 电工技术使用的文件的制订.第3部分:连接图,图表和一览表Preparation of documents used in electrotechnology; part 3: connection diagrams, tables andlists

IEC 61082-4-1996 电工技术使用的文件的制订.第4部分:设定位置和安装文件Preparation of documents used in electrotechnology - Part 4: Location and installationdocuments

IEC 61083-1-2001 高压脉冲试验中测量用仪器和软件.第1部分:对仪器的要求Instruments and software used for measurement in high-voltage impulse tests - Part 1:Requirements for instruments69P;A4

IEC 61083-2-1996高压试验测量用数字记录仪.第2部分:测定脉冲波长系数用

软件的鉴定

Digital recorders for measurements in high-voltage tests - Part 2: Evaluation of software used forthe determination of the parameters of impulse waveforms41P;A4

IEC 61084-1 AMD 1-1993 第1次修改Cable trunking and ducting systems for electrical installations; part 1: general requirements;amendment 19P;A4

IEC 61084-1-1991 电气设备用的电缆槽和管道系统.第1部分:一般要求Cable trunking and ducting systems for electrical installations; part 1: general requirements45P;A4

IEC 61084-2-1-1996电气设备用的电缆槽和管道系统.第2部分:特殊要求.第1节:安装在墙上或屋顶上的电缆槽或管道系统

Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements -Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings23P;A4

（246） 351

IEC标准目录


开本页数

IEC 61084-2-4-1996电设备用电缆干线系统和电缆管道系统.第2部分:特殊要求.第4节:工作电极

Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements -Section 4: Service poles23P;A4

IEC 61086-1-1992加感印制电路板用敷层(保形敷层)规范.第1部分:定义、分

类及一般要求

Specification for coatings for loaded printed wire boards (conformal coatings); part 1: definitions,classification and general requirements11P;A4

IEC 61086-2-1992 加感印制电路板用敷层(保形敷层)规范.第2部分:试验方法Specification for coatings for loaded printed wire boards (conformal coatings); part 2: methods oftest

IEC 61086-3-1-1995加感印制电路板用涂覆层(保形敷层).第3部分:专用材料规

范.活页1:通用(I类)和高可靠性(II类)涂层

Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individualmaterials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II)13P;A4

IEC 61089 AMD 1-1997 圆丝同心绞合架空导线.修订件1Round wire concentric lay overhead electrical stranded conductors; Amendment 116P;A4

IEC 61089-1991 圆丝同心绞合架空导线Round wire concentric lay overhead electrical stranded conductors65P;A4

IEC 61094-1-2000 测量传声器.第1部分:实验室标准传声器规范Measurement microphones - Part 1: Specifications for laboratory standard microphones27P;A4

IEC 61094-2-1992测量传声器.第2部分:用可逆法对实验室标准传声器的压力

校准的基本方法

Measurement microphones; part 2: primary method for pressure calibration of laboratorystandard microphones by the reciprocity technique65P;A4

IEC 61094-3-1995测量传声器-第3部分:用互易技术对实验室标准传声器的自

由场校准的基本方法

Measurement microphones - Part 3: Primary method for free-field calibration of laboratorystandard microphones by the reciprocity technique35P;A4

IEC 61094-4-1995 测量传声器.第4部分:工作标准传声器的规范Measurement microphones - Part 4: Specifications for working standard microphones23P;A4

IEC 61094-5-2001测量传声器.第5部分:通过比对进行工作标准传声器的压力

校准的方法

Measurement microphones - Part 5: Methods for pressure calibration of working standardmicrophones by comparison35P;A4

IEC 61095 AMD 1-2000 家用及类似用途的机电接触器 Electromechanical contactors for household and similar purposes

IEC 61095-1992 家用及类似用途的机电接触器Electromechanical contactors for household and similar purposes211P;A4

IEC 61096 AMD 1-1996 数字音频激光唱盘复制设备特性的测量方法.修改件1Methods of measuring the characteristics of reproducing equipment for digital audio compactdiscs; Amendment 119P;A4

IEC 61096-1992 数字音频激光唱盘复制设备特性的测量方法Methods of measuring the characteristics of reproducing equipment for digital audio compactdiscs

IEC 61097-10-1999海上遇险和安全系统(GMDSS).第10部分:海上定位-B船地

面装置.操作和性能要求.试验方法和要求的试验结果

Global maritime distress and safety system (GMDSS) - Part 10: Inmarsat-B ship earth stationequipment - Operational and performance requirements, methods of testing and required testresults

（247） 351

IEC标准目录


开本页数

IEC 61097-1-1992海上呼救和安全装置.第1部分:雷达发射机应答器.海上搜索

和营救设备.操作和功能要求.试验方法和规定试验结果

Global Maritime Distress and Safety System (GMDSS); part 1: radar transponder; marine searchand rescue (SART); operational and performance requirements, methods of testing and requiredtest results36P;A4

IEC 61097-12-1996海上呼救和安全体系.第12部分:幸存便携式小船的二路甚

高频无线电话装置的操作、功能要求、试验方法和所需要的试验结果

Global maritime distress and safety system (GMDSS) - Part 12: Survival craft portable two-wayVHF radiotelephone apparatus - Operational and performance requirements, methods of testingand required test results36P;A4

IEC 61097-2-2002全球海上遇险和安全系统(GMDSS).第2部分:COSPAS-SARSAT EPIRB 406MHz卫星紧急定位无线电信标的操

作.操作和性能要求.测试方法和要求的测试结果

Global maritime distress and safety system (GMDSS) - Part 2: COSPAS-SARSAT EPIRB;Satellite emergency position indicating radio beacon operating on 406 MHz; Operational andperformance requirements, methods of testing and required test results40P;A4

IEC 61097-3-1994海上呼救和安全装置.第3部分:数字选择呼叫装置.操作和功

能要求.试验方法和规定试验结果

Global maritime distress and safety system (GMDSS) - Part 3: Digital selective calling (DSC)equipment - Operational and performance requirements, methods of testing and required testingresults79P;A4

IEC 61097-4-1994海上呼救和安全装置.第1部分:INMARSAT-C 船地面站和

INMARSA增强群呼设备.操作和功能要求.试验方法和规定

试验结果

Global maritime distress and safety system (GMDSS) - Part 4: INMARSAT-C ship earth stationand INMARSAT enhanced group call (EGC) equipment - Operational and performancerequirements, methods of testing and required test results57P;A4

IEC 61097-5-1997全球海上遇险和安全系统.第5部分:INMARSAT-E,通过

INMARSAt 系统对紧急情况位置指示的无线电信标的操作.操作和性能要求、试验方法和要求的试验结果

Global maritime distress and safety system (GMDSS) - Part 5: INMARSAT-E - Emergencyposition indicating radio beacon (EPIRB) operating through the Inmarsat system - Operationaland performance requirements, methods of testing and required test results45P;A4

IEC 61097-6-1995海上呼救和安全装置.第6部分:船用船海,气象预报和应急信

息接收窄带直接打印电报设备.操作和性能要求,试验方法

和结果

Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printingtelegraph equipment for the reception of navigational and meteorological warnings and urgentinformation to ships (NAVTEX) - Operational and performance requirements, methods of testingand required test results

IEC 61097-7-1996海上呼救和安全体系.第7部分: 船用甚高频无线电话发射机

和接收机的操作、功能要求、试验方法和所需要的试验结果

Global maritime distress and safety system (GMDSS) - Part 7: Shipborne VHF radiotelephonetransmitter and receiver - Operational and performance requirements, methods of testing andrequired test results77P;A4

IEC 61097-8-1998海上呼救安全系统.第8部分:在海事MF,MF/HF和VHF频带

中数字选择呼叫(DSC)接受用船用监控接受装置.操作和性

能要求,测试方法和所要求的检验结果

Global maritime distress and safety system (GMDSS) - Part 8: Shipborne watchkeepingreceivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHFbands - Operational and performance requirements, methods of testing and required test results40P;A4

IEC 61097-9-1997

全球海上遇险和安全系统(CMDSS).第9部分:海上呼救用电

话、数字选择呼叫设备(DSC)和窄带直接打印设备(NBOP)用中频带和高频带船用无线电发射机和接收机操作和性能要求测试方法和性能的测试结果

Global maritime distress and safety system (GMDSS) - Part 9: Shipborne transmitters andreceivers for use in the MF and HF bands suitable for telephony, digital selective calling (DSC)and narrow band direct printing (NBDP) - Operational and performance requirements, methods oftesting and required test results56P A4

（248） 351

IEC标准目录


开本页数

IEC 61098-1992 γ和β射线放射源个人用表面污染监测机组Installed personnel surface contamination monitoring assemblies for alpha and beta emitters71P;A4

IEC 61099-1992 电工用新的合成有机酯规范Specifications for unused synthetic organic esters for electrical purposes21P;A4

IEC 61100-1992 与燃点和净灼热值相对应的绝缘液体规范Classification of insulating liquids according to fire-point and net caloring value11P;A4

IEC 61101-1991采用频率范围为0.5MHz至15MHz的平面扫描技术对水听

器的绝对校准

The absolute calibration of hydrophones using the planar scanning technique in the frequencyrange 0,5 MHz to 15 MHz46P;A4

IEC 61102 AMD 1-1993 使用0.5-15MH水听器对超声的测量和表征.修改件1Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range0,5 MHz to 15 MHz; amendment 19P;A4

IEC 61102-1991采用频率范围为0.5MHz至15MHz的水听器对超声场的测

量和特性记述

Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range0,5 MHz to 15 MHz111P;A4

IEC 61104-1992 12cm CD-V,小型盘式视象系统Compact disc video system; 12 cm CD-V23P;A4

IEC 61105-1991 磁带录像系统.参考磁带Reference tapes for video tape recorder systems12P;A4

IEC 61106-1993 录像盘.参数的测量方法Videodisks; methods of measurement for parameters93P;A4

IEC 61108-1-1996全球导航卫星系统(CNNS).第1部分:全球定位系统(GPS).接收机设备.性能标准、试验方法和要求的测定结果

Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiverequipment - Performance standards, methods of testing and required test results37P;A4

IEC 61108-2-1998海上航海和无线电通信设备和系统.全球航海卫星系统

(GNSS).第2部分:全球航海卫星系统(GLONASS).接收设

备.性能标准.试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Global navigation satellitesystems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment -Performance standards, methods of testing and required test results33P;A4

IEC 61109 AMD 1-1995标准电压大于1000V的a.c.架空线用复合绝缘子.定义,试验

方法和验收标准

Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V -Definitions, test methods and acceptance criteria; Amendment 19P;A4

IEC 61109-1992额定电压大于1000V的交流架空电线复合绝缘子的定义.试验方法和验收准则

Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V;definitions, test methods and acceptance criteria73P;A4

IEC 61111 AMD 1-2002 电器用绝缘材料垫.修改件1Matting of insulating material for electrical purposes; Amendment 13P;A4

IEC 61111 Edition 1.1-2002 电器用绝缘材料垫Matting of insulating material for electrical purposes59P;A4

IEC 61111-1992 电工用绝缘材料纺织物Matting of insulating material for electrical purposes59P;A4

（249） 351

IEC标准目录


开本页数

IEC 61112 AMD 1-2002 电器用绝缘材料套.修改件1Blankets of insulating material for electrical purposes; Amendment 13P;A4

IEC 61112 Edition 1.1-2002 电器用绝缘材料套Blankets of insulating material for electrical purposes73P;A4

IEC 61112-1992 电工用绝缘材料涂层Blankets of insulating material for electrical purposes77P;A4

IEC 61114-1-1999在11/12GHZ谱带内的卫星广播发射的接收天线.第1部分:电气测量

Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band - Part 1:Electrical measurements93P;A4

IEC 61114-2-1996在11/12GHz的频带上传送卫星广播用接收天线的测量方

法.第2部分:个人用及共用接收天线的机械和环境试验

Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12GHz band - Part 2: Mechanical and environmental tests on individual and collective receivingantennas

IEC 61115-1992 程序分析器的处理试样系统性能的表达法Expression of performance of sample handling systems for process analyzers71P;A4

IEC 61116-1992 小型水电站机电设备导则Electromechanical equipment guide for small hydroelectric installations109P;A4

IEC 61118-1993 使用M2型12.65mm(0.5in)磁带的螺旋扫描盒.磁带录像系

统

Helican-scan video type cassette system using 12,65 mm (0,5 in) magnetic tape; type M2169P;A4

IEC 61119-1-1992 数字录音磁带盒系统.第1部分:尺寸和特性Digital Audio Tape cassette system (DAT); part 1: dimensions and characteristics221P;A4

IEC 61119-2-1991 数字录音磁带盒系统.第2部分:DAT校准磁带Digital audio tape cassette system; part 2: DAT calibration tape9P;A4

IEC 61119-3-1992 数字录音磁带盒系统.第3部分:DAT磁带性能Digital Audio Tape cassette system (DAT); part 3: DAT tape properties17P;A4

IEC 61119-5-1993 盒式数字录音磁带系统.第5部分:专业用盒式数字录音磁带

(DAT)系统

Digital audio tape cassette system (DAT); part 5: DAT for professional use35P;A4

IEC 61119-6-1992 盒式数字录音磁带系统.第6部分:系列复制磁带系统Digital audio tape cassette system (DAT); part 6: serial copy management system13P;A4

IEC 61120-1-1991专业用的,采用6.3mm磁带的数字音频盘式磁带录音系统.第1部分:一般要求

Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use;part 1: general requirements21P;A4

IEC 61120-2-1991专业用的,采用6.3mm磁带的数字音频盘式磁带录音系统.第2部分:数据格式A

Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use;part 2: format A39P;A4

IEC 61120-3-1991专业用的,采用6.3mm磁带的数字音频盘式磁带录音系统.第3部分:数据格式B

Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use;part 3: format B37P;A4

IEC 61120-4-1992专业用采用6.3mm磁带的数字音频盘式磁带录音系统.第4部分:磁带性能.定义和测量方法

Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use;part 4: magnetic tape properties; definitions and methods of measurement25P;A4

（250） 351

IEC标准目录


开本页数

IEC 61120-5-1995使用6.3mm磁带的专业用数字音频磁带录音机带盘系统.第5部分:带盘

Digital audio tape recorder, reel-to-reel system, using 6,3 mm magnetic tape, for professional use- Part 5: Reels13P;A4

IEC 61121-2002 家用滚筒式干燥器性能的测量方法Tumble dryers for household use - Methods for measuring the performance26P;A4

IEC 61123-1991 可靠性试验.成功率用性能审核试验计划Reliability testing; compliance test plans for success ratio61P;A4

IEC 61124-1997 可靠性试验.恒定故障率和恒定故障强度的审核试验Reliability testing - Compliance tests for constant failure rate and constant failure intensity117P;A4

IEC 61125-1992 未用过的烃基绝缘液体.鉴定抗氧化稳定性的试验方法Unused hydrocarbon-based insulating liquids; test methods for evaluating the oxidation stability47P;A4

IEC 61126 AMD 1-1996 大灯外型制造方法.第1次修改Procedure for use in the preparation of maximum lamp outlines; Amendment 115P;A4

IEC 61126-1992 大灯泡外形图绘制中采用的程序Procedure for use in the preparation of maximum lamp outlines79P;A4

IEC 61131-1-1992 程序控制器.第1部分:一般介绍Programmable controllers; part 1: general information63P;A4

IEC 61131-2-2003 程序控制器.第2部分:设备要求和试验Programmable controllers - Part 2: Equipment requirements and tests122P;A4

IEC 61131-3-2003 程序控制器.第3部分:程序设计语言Programmable controllers - Part 3: Programming languages226P;A4

IEC 61131-5-2000 程序控制器.第5部分:通信Programmable controllers - Part 5: Communications99P;A4

IEC 61131-7-2000 程序控制器.第7部分:模糊控制程序 Programmable controllers - Part 7: Fuzzy control programming

IEC 61133-1992电力牵引.铁路车辆.电力和热力/电力传动的铁路车辆制成

后和投入运行前的试验方法

Electric traction; rolling stock; test methods for electric and thermal/electric rolling stock oncompletion of construction and before entry into service87P;A4

IEC 61134-1992 测量地球γ辐射用的机载仪器Airborne instrumentation for measurement of terrestrial gamma radiation51P;A4

IEC 61136-1-1992半导体电力变流器.可调速电气传动系统.一般要求.第1部分:特别是对直流电动机传动的定额规范

Semiconductor power convertors; adjustable speed electric drive systems; general requirements;part 1: rating specifications, particularly for d.c. motor drives67P;A4

IEC 61137-1992辐射保护仪表.人员躯体表面污染监测装配组件.低能X和γ射线发射体

Radiation protection instrumentation; installed personnel surface contamination monitoringassemblies; low energy X and gamma emitters57P;A4

IEC 61138 AMD 1-1995 轻便式接地和短路设备用电缆.第1次修改Cables for portable earthing and short-circuiting equipment; Amendment 17P;A4

IEC 61138-1994 便携式接地和短路设备用电缆Cables for portable earthing and short-circuiting equipment29P;A4

（251） 351

IEC标准目录


开本页数

IEC 61140-2001 电击防护.装置和设备的通用概念Protection against electric shock - Common aspects for installation and equipment83P;A4

IEC 61143-1 AMD 1-1997 电工测量仪器.X-t型记录仪.第1部分:定义和要求.第1次修订Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements;Amendment 1

IEC 61143-1 Edition 1.1-1998 电测量仪表.X-t记录仪.第1部分:定义和要求Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements68P;A4

IEC 61143-1-1992 电工测量仪器.X-t型记录仪.第1部分:定义和要求Electrical measuring instruments; X-t recorders; part 1: definitions and requirements61P;A4

IEC 61143-2-1992 电工测量仪器.X-t型记录仪.第2部分:推荐附加试验方法Electrical measuring instruments; X-t recorders; part 2: recommended additional test methods17P;A4

IEC 61144-1992 绝缘油氧指数测定的试验方法Test method for the determination of oxygen index of insulating liquids20P;A4

IEC 61145-1992 放射性核素试样用电离室系统的校准与使用Calibration and usage of ionization chamber systems for assay of radionuclides21P;A4

IEC 61146-1-1994摄象机(PAL/SECAN/NTSC).测量方法.第1部分:非广播单

测头摄象机

Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 1: Non-broadcast single-sensor cameras187P;A4

IEC 61146-2-1997摄象机(PAL/SECAN/NTSC).测量方法.第2部分:两个和三

个传感器的专业照相机

Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensorprofessional cameras97P;A4

IEC 61146-3-1997摄像机(PAL/SECAN/NTSC).测量方法.第1部分:非广播单

测头摄像机

Video cameras (PAL/SECAM/NTSC) - Methods of measurements - Part 3: Non-broadcastcamera-recorders75P;A4

IEC 61146-4-1998 摄像机(PAL/SECAN/NTSC).测量方法.第4部分:摄像机和

照像机的自动功能

Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 4: Automatic functions ofvideo cameras and camera-recorders

IEC 61148-1992 电子管堆叠散件及组件以及大功率变流设备用端子记号Terminal markings for valve device stacks and assemblies and for power convertor equipment33P;A4

IEC 61150-1992碱性二次电池和电池组.采用微形电池设计的可充电的整体

密封式镍镉蓄电池组

Alkaline secondary cells and batteries; sealed nickel-cadmium rechargeable monobloc batteriesin button cell design11P;A4

IEC 61151-1992核仪表.使用离子辐射探测器的放大器和前置放大器.试验

程序

Nuclear instrumentation; amplifiers and preamplifiers used with detectors of ionizing radiation;test procedures154P;A4

IEC 61152-1992 金属护皮温度元件的尺寸Dimensions of metal-sheathed thermometer elements6P;A4

IEC 61153-1992工业控制系统用电动和气动模拟图表记录器.验收与例行测

试导则

Electrical and pneumatic analogue chart recorders for use in industrial-process control systems;guidance for inspection and routine testing13P;A4

（252） 351

IEC标准目录


开本页数

IEC 61156-1-1-2001数字通信用对绞或星绞多芯对称电缆.第1-1部分:容量验证.总规范

Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capabilityapproval; Generic specification19P;A4

IEC 61156-1-2002 数字通信用对绞或星绞多芯对称电缆.第1部分:总规范Multicore and symmetrical pair/quad cables for digital communication - Part 1: Genericspecification

IEC 61156-2 AMD 1-1999数字通信用对绞或星绞多芯对称电缆.第2部分:水平楼板布

线.分规范.修改件1

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floorwiring - Sectional specification; Amendment 17P;A4

IEC 61156-2 AMD 2-2001数字通信用对绞或星绞多芯对称电缆.第2部分:水平楼板布

线.分规范.修改件2

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floorwiring - Sectional specification; Amendment 27P;A4

IEC 61156-2 Edition 1.2-2001数字通信用对绞或星绞多芯和对称电缆.第2部分:水平楼板

布线.分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floorwiring - Sectional specification31P;A4

IEC 61156-2-1 AMD 1-1999数字通信用对绞或星绞多芯对称电缆.第2-1部分:水平楼板

布线.空白详细规范.修改件1

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floorwiring - Blank detail specification; Amendment 13P;A4

IEC 61156-2-1 AMD 2-2001数字通信用对绞或星绞多芯对称电缆.第2部分:水平楼板布

线.空白详细规范.修改件2

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floorwiring; Blank detail specification; Amendment 25P;A4

IEC 61156-2-1 Edition 1.1-2000数字通信用多芯和对称二路/四路电缆.第2部分:水平地板布

线.第1节:空白详细规范

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floorwiring - Section 1: Blank detail specification15P;A4

IEC 61156-2-1 Edition 1.2-2001数字通信用对绞或星绞多芯对称电缆.第2-1部分:水平楼板

布线.空白详细规范

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floorwiring - Blank detail specification15P;A4

IEC 61156-2-2-2001数字通信用对绞或星绞多芯对称电缆.第2-2部分:水平楼板

布线.容量验证.分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floorwiring; Capability approval; Sectional specification15P;A4

IEC 61156-3 AMD 1-1999数字通信用对绞或星绞多芯对称电缆.第3部分:工作区布线.分规范.修改件1

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring- Sectional specification; Amendment 15P;A4

IEC 61156-3 AMD 2-2001数字通信用对绞或星绞多芯对称电缆.第3部分:工作区布线.分规范.修改件2

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring- Sectional specification; Amendment 27P;A4

IEC 61156-3 Edition 1.2-2001数字通信用对绞或星绞多芯和对称电缆.第3部分:工作场所

布线.分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring;Sectional specification29P;A4

（253） 351

IEC标准目录


开本页数

IEC 61156-3-1 AMD 1-1999数字通信用对绞或星绞多芯对称电缆.第3-1部分:工作区布

线电缆.空白详细规范.修改件1

Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work areawiring - Blank detail specification; Amendment 13P;A4

IEC 61156-3-1 AMD 2-2001数字通信用对绞或星绞多芯对称电缆.第3-1部分:工作区布

线电缆.空白详细规范.修改件2

Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work areawiring; Blank detail specification; Amendment 25P;A4

IEC 61156-3-1 Edition 1.1-2000数字通信用多芯和对称二路/四路电缆.第3部分:工作地点布

线.第1节:空白详细规范

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring- Section 1: Blank detail specification15P;A4

IEC 61156-3-1 Edition 1.2-2001数字通信用对绞或星绞多芯对称电缆.第3-1部分:工作区布

线.空白详细规范

Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work areawiring - Blank detail specification15P;A4

IEC 61156-3-2-2001数字通信用对绞或星绞多芯对称电缆.第3-2部分:工作区布

线电缆.容量验证.分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work areawiring; Capability approval; Sectional specification15P;A4

IEC 61156-4 AMD 1-1999数字通信用对绞或星绞多芯对称电缆.第4部分:吊索.分规

范.修改件1

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables -Sectional specification; Amendment 15P;A4

IEC 61156-4 AMD 2-2001数字通信用对绞或星绞多芯对称电缆.第4部分:吊索.分规

范.修改件2

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables -Sectional specification; Amendment 27P;A4

IEC 61156-4 Edition 1.2-2001数字通信用对绞或星绞多芯和对称电缆.第4部分:吊索.分规

范

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables -Sectional specification29P;A4

IEC 61156-4-1 AMD 1-1999数字通信用对绞或星绞多芯对称电缆.第4-1部分:吊索.空白

详细规范.修改件1

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables -Blank detail specification; Amendment 13P;A4

IEC 61156-4-1 AMD 2-2001数字通信用对绞或星绞多芯对称电缆.第4-1部分:吊索.空白

详细规范.修改件2

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables;Blank detail specification; Amendment 25P;A4

IEC 61156-4-1 Edition 1.1-2000数字通信用多芯和对称二路/四路电缆.第4部分:吊索.第1节:空白详细规范

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables -Section 1: Blank detail specification15P;A4

IEC 61156-4-1 Edition 1.2-2001数字通信用对绞或星绞多芯对称电缆.第4-1部分:吊索.空白

详细规范

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables -Blank detail specification15P;A4

IEC 61156-4-2-2001数字通信用对绞或星绞多芯对称电缆.第4-2部分:吊索.能力

鉴定.分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables;Capability approval; Sectional specification15P;A4

（254） 351

IEC标准目录


开本页数

IEC 61156-5-1-2002数字通信用对绞/星绞多芯和对称电缆.第5-1部分:不高于

600MHz的有传输特性的对绞/星绞对称电缆.水平地板布


Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetricalpair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Blankdetail specification9P;A4

IEC 61156-5-2002数字通信用对绞/星绞多芯和对称电缆.第5部分:不高于


线分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetricalpair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring;Sectional specification



线.鉴定能力.分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetricalpair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring;Capability approval; Sectional specification8P;A4


600MHz的有传输特性的对绞/星绞对称电缆.工作场所布


Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetricalpair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Blank detailspecification9P;A4

IEC 61156-6-2002数字通信用对绞/星绞多芯和对称电缆.第6部分:不高于


线分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetricalpair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Sectionalspecification



线.鉴定性能.分规范

Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetricalpair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Capabilityapproval; Sectional specification8P;A4

IEC 61157-1992 医疗诊断超声波设备的声输出申报的要求Requirements for the declaration of the acoustic output of medical diagnostic ultrasonicequipment

IEC 61158-3-2000测量和控制用数字数据通信.工业控制系统用字段总线.第3部分:数据链接服务定义

Digital data communications for measurement and control - Fieldbus for use in industrial controlsystems - Part 3: Data Link Service definition322P;A4

IEC 61158-4-2000测量和控制用数字数据通信.工业控制系统用字段总线.第4部分:数据链接协议规范

Digital data communications for measurement and control - Fieldbus for use in industrial controlsystems - Part 4: Data Link protocol specification1062P;A4

IEC 61158-5-2000测量和控制用数字数据通信.工业控制系统用字段总线.第5部分:应用层服务定义

Digital data communications for measurement and control - Fieldbus for use in industrial controlsystems - Part 5: Application Layer Service definition914P;A4

IEC 61158-6-2000测量和控制用数字数据通信.工业控制系统用字段总线.第6部分:应用层协议规范

Digital data communications for measurement and control - Fieldbus for use in industrial controlsystems - Part 6: Application Layer protocol specification896P;A4

IEC 61160 AMD 1-1994 形式设计概述.补充件1Formal design review; Amendment 19P;A4

IEC 61160-1992 规则式设计概述Formal design review63P;A4

（255） 351

IEC标准目录


开本页数

IEC 61161 Edition 1.1-1998 频率范围在0,5MHZ到25MHZ的液体中超声电力测量 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz

IEC 61161-1998 0.5MHz至25MHz范围内的液体中超声功率的测量 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz

IEC 61162-1-2000航海和无线电通信设备及系统.数字接口.第1部分:单一扩音

器和复合听声器

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1:Single talker and multiple listeners80P;A4

IEC 61162-2-1998航海和无线电通信设备及系统.数字接口.第2部分:简单扩音

器和复合听声器.高速传输

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2:Single talker and multiple listeners, high-speed transmission27P;A4

IEC 61162-400-2001海上导航和无线电通信设备及系统.数字接口.第400部分:复合扩音器和复合听声器.船用系统.简介和一般原则

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part400: Multiple talkers and multiple listeners; Ship systems interconnection; Introduction andgeneral principles40P;A4

IEC 61162-401-2001海上导航和无线电通信设备及系统.数字接口.第401部分:多通活器和多受话器.船舶系统互联.应用轮廓

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part401: Multiple talkers and multiple listeners; Ship systems interconnection; Application profile116P;A4

IEC 61162-410-2001船舶导航和无线电通信设备及系统.数字接口.第410部分:复合扩音器和复合听声器.船用系统.运输轮廓要求和基本运

输轮廓

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part410: Multiple talkers and multiple listeners; Ship systems interconnection; Transport profilerequirements and basic transport profile62P;A4

IEC 61162-420-2001海上导航和无线电通信设备及系统.数字接口.第420部分:多通活器和多受话器.船舶系统互联.配套标准要求和基本配

套标准

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part420: Multiple talkers and multiple listeners; Ship systems interconnection; Companion standardrequirements and basic companion standards101P;A4

IEC 61163-1-1995 应力筛分的可靠性.分组制造零件的可维修性Reliability stress screening - Part 1: Repairable items manufactured in lots153P;A4

IEC 61163-2-1998 应力筛分的可靠性.第2部分:电子元件Reliability stress screening - Part 2: Electronic components69P;A4

IEC 61164-1995 可靠度增长-统计试验和估计方法Reliability growth - Statistical test and estimation methods61P;A4

IEC 61165-1995 马尔克夫技术的应用Application of Markov techniques45P;A4

IEC 61166-1993高压交流电路断路器.高压交流电路断路器的抗地震质量导

则

High-voltage alternating current circuit-breakers; guide for seismic qualification of high-voltagealternating current circuit-breakers31P;A4

IEC 61167 AMD 1-1995 金属检卤灯.第1次修改Metal halide lamps; Amendment 141P;A4

IEC 61167 AMD 2-1997 金属卤素灯.修改件2Metal halide lamps; Amendment 23P;A4

IEC 61167 AMD 3-1998 金属卤素灯.补充件3Metal halide lamps; Amendment 325P;A4

（256） 351

IEC标准目录


开本页数

IEC 61167-1992 金属卤素灯Metal halide lamps51P;A4

IEC 61168-1993 放射治疗模拟器功能特性Radiotherapy simulators; functional performance characteristics63P;A4

IEC 61169-1 AMD 1-1996射频连接器.第1部分:总规范.一般要求和测量方法.第1次修

改

Radio-frequency connectors - Part 1: Generic specification - General requirements andmeasuring methods; Amendment 115P;A4

IEC 61169-1 AMD 2-1997 射频连接器.第1部分:总规范.一般要求和测量方法.修订2Radio-frequency connectors - Part 1: Generic specification - General requirements andmeasuring methods; Amendment 29P;A4

IEC 61169-1 Edition 1.2-1998 射频连接器.第1部分:总规范.一般要求和测量方法Radio-frequency connectors - Part 1: Generic specification; General requirements and measuringmethods186P;A4

IEC 61169-1-1-1996 射频连接器.第1-1部分:单个、多系列、双语空白详细规范Radio-frequency connectors - Part 1-1: Single, multi-series, dual-language blank detailspecification

IEC 61169-1-1992 射频连接器.第1部分:总规范.一般要求和测量方法Radio-frequency connectors; part 1: generic specification; general requirements and measuringmethods163P;A4

IEC 61169-2-2001 射频连接器.第2部分:分规范.9.52型射频同轴连接器Radio-frequency connectors - Part 2: Sectional specification; Radio frequency coaxial connectorsof type 9,5237P;A4

IEC 61169-24-2001射频连接器.第24部分:分规范.主要用于75欧姆电缆分配系

统的螺纹连接射频同轴连接器(F型)

Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxialconnectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)33P;A4

IEC 61169-31-1999射频连接器.第31部分:带有螺套式联接器和内径

1.0mm(0.039in)外部导体的射频同轴连接器.特性阻抗50欧姆(1 0型)

Radio-frequency connectors - Part 31: RF coaxial connectors with inner diameter of outerconductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0)45P;A4

IEC 61169-32-1999射频连接器. 第32部分:带螺纹接头的、外导线

1.85mm(0.072in)内径的RF共轴连接器.特性阻抗50欧姆

(1 85型)

Radio frequency connectors - Part 32: RF coaxial connectors with inner diameter of outerconductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type1,85)

IEC 61169-33-1996 射频连接器.第33部分:BMA r.f.系列连接器的分规范Radio-frequency connectors - Part 33: Sectional specification for series BMA r.f. connectors53P;A4

IEC 61169-36-1996射频连接器.第36部分:带有插入式连接器的微型r.f.同轴联

接器.特性阻抗50欧姆(MCX型)

Radio frequency connectors - Part 36: Microminiature r.f. coaxial connectors with snap-oncoupling - Characteristic impedance 50 ohms (type MCX)51P;A4

IEC 61171-1992 辐射保护仪表.监视设备.环境中的大气放射性碘Radiation protection instrumentation; monitoring equipment; atmospheric radioactive iodines inthe environment59P;A4

IEC 61172-1992 辐射保护仪表.监视设备.环境中的放射性悬浮微粒Radiation protection instrumentation; monitoring equipment; radioactive aerosols in theenvironment

（257） 351

IEC标准目录


开本页数

IEC 61173-1992 光电功率发生系统过压保护.导则Overvoltage protection for photovoltaic (PV) power generating systems; guide19P;A4

IEC 61174-2001海上导航和无线电通信设备和系统.电子流程图展示和信息

系统(ECDIS).操作和性能要求.试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Electronic chart displayand information system (ECDIS) - Operational and performance requirements, methods oftesting and required test results91P;A4

IEC 61175-1993 信号和连接的术语名称Designations for signals and connections70P;A4

IEC 61176-1993 手持式电动圆锯性能的测试方法Hand-held electric mains voltage operated circular saws; methods for measuring theperformance

IEC 61178-2-1-1993石英晶体单元.IEC电子元器件质量评定体系规范(IECQ).第2部分:分规范:性能验收.第1节:空白详细规范

Quartz crystal units; a specification in the IEC quality assessment system for electroniccomponents (IECQ); part 2: sectional specification; capability approval; section 1: blank detailspecification

IEC 61178-2-1993石英晶体单元.IEC电子元器件质量评定体系规范(IECQ).第2部分:分规范:性能验收

Quartz crystal units; a specification in the IEC quality assessment system for electroniccomponents (IECQ); part 2: sectional specification; capability approval61P;A4

IEC 61178-3-1-1993石英晶体单元.IEC电子元器件质量评定体系规范(IECQ).第3部分:分规范:合格验收.第1节:空白详细规范

Quartz crystal units; a specification in the IEC quality assessment system for electroniccomponents (IECQ); part 3: sectional specification; qualification approval; section 1: blank detailspecification

IEC 61178-3-1993石英晶体单元.IEC电子元器件质量评定体系规范(IECQ).第3部分:分规范:合格验收

Quartz crystal units; a specification in the IEC quality assessment system for electroniccomponents (IECQ); part 3: sectional specification; qualification approval27P;A4

IEC 61179-1993使用D2(NTSC,PAL,PAL-M)格式19mm磁带的螺旋扫描数

字复合盒式录像系统

Helical-scan digital composite video cassette recording system using 19 mm magnetic tape,format D2 (NTSC, PAL, PAL-M)235P;A4

IEC 61180-1-1992 低压设备的高压试验技术.第1部分:定义、试验和方法要求High-voltage test techniques for low-voltage equipment; part 1: definitions, test and procedurerequirements57P;A4

IEC 61180-2-1994 低压设备的高压试验技术.第2部分:试验设备High-voltage test techniques for low-voltage equipment - Part 2: Test equipment19P;A4

IEC 61181-1993 浸渍绝缘材料.工厂试验用电子设备溶解气体分析的应用Impregnated insulating materials; application of dissolved gas analysis (DGA) to factory tests onelectrical equipment17P;A4

IEC 61182-10-1999 印制板.电子数据描述和转换.第10部分:电子数据层次Printed boards - Electronic data description and transfer - Part 10: Electronic data hierarchy89P;A4

IEC 61182-1-1994 印制板.电子数据描述和转换.第1部分:印制板数字格式描述Printed boards - Electronic data description and transfer - Part 1: Printed board description indigital form203P;A4

（258） 351

IEC标准目录


开本页数

IEC 61182-7-1995印制板.电子数据描述和转换.第7部分:裸板数字格式电气试

验

Printed boards - Electronic data description and transfer - Part 7: Bare board electric testinformation in digital form94P;A4

IEC 61183-1994 电声学.声级计的无规定射声场及扩散声场的校正Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters41P;A4

IEC 61184 AMD 1-2000 卡口灯座.修改件1 Bayonet lampholders; Amendment 1

IEC 61184-1997 卡口灯座Bayonet lampholders101P;A4

IEC 61185 AMD 1-1995 电源设备用的磁氧化铁芯尺寸.第1次修改Magnetic oxide cores (ETD-cores) intended for use in power supply applications - Dimensions;Amendment 113P;A4

IEC 61185-1992 电源设备用的磁氧化铁芯尺寸Magnetic oxide cores (ETD-cores) intended for use in power supply applications; dimensions31P;A4

IEC 61186-1-1992通信和电子设备用变压器和电感器.铁芯和组件的名称与符

号.第1部分:叠片铁芯

Transformers and inductors for use in telecommunication and electronic equipment; designationsfor cores and assemblies; part 1: laminated cores15P;A4

IEC 61187-1993 电气和电子测量设备.文献Electrical and electronic measuring equipment; documentation37P;A4

IEC 61188-1-1-1997印制电路板和印制电路板组件.设计和使用.第1-1部分:总要

求.电子组件的平整度情况

Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements -Flatness considerations for electronic assemblies23P;A4


求.控制阻抗

Printed boards and printed boards assemblies - Design and use - Part 1-2: Generic requirements- Controlled impedance83P;A4


求.附属物(所有的/共同的)考虑

Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint)considerations; Generic requirements141P;A4

IEC 61188-5-6-2003印制板和印制板组件.设计和使用.第5-6部分:附属物考虑.四面带有J形引线的片状载体

Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint)considerations; Chip carriers with J-leads on four sides46P;A4

IEC 61189-1 AMD 1-2001电气材料、互连结构和组装件的试验方法.第1部分:一般试

验方法和分类法.修改件1

Test methods for electrical materials, interconnection structures and assemblies - Part 1: Generaltest methods and methodology; Amendment 115P;A4

IEC 61189-1 Edition 1.1-2001互连结构和附件用电气材料的试验方法.第1部分:一般试验

方法和方法论

Test methods for electrical materials, interconnection structures and assemblies - Part 1: Generaltest methods and methodology51P;A4

IEC 61189-1-1997电气材料、互连结构和组装件的试验方法.第1部分:一般试

验方法和分类法

Test methods for electrical materials, interconnection structures and assemblies - Part 1: Generaltest methods and methodology37P;A4

（259） 351

IEC标准目录


开本页数

IEC 61189-2 AMD 1-2000互连结构和附件用电气材料的试验方法.第2部分:互连结构

用材料的试验方法.修改件1

Test methods for electrical materials, interconnection structures and assemblies - Part 2: Testmethods for materials for interconnection structures; Amendment 138P;A4

IEC 61189-2-1997互连结构和附件用电气材料的试验方法.第2部分:互连结构

用材料的试验方法

Test methods for electrical materials, interconnection structures and assemblies - Part 2: Testmethods for materials for interconnection structures139P;A4

IEC 61189-3 AMD 1-1999电气材料、互连构件和部件的试验方法.第3部分:互连构件

的试验方法(印制电路).第1次修订

Test methods for electrical materials, interconnection structures and assemblies - Part 3: Testmethods for interconnection structures (printed boards); Amendment 133P;A4

IEC 61189-3-1997电气材料、互连结构和部件的试验方法.第3部分:互连结构

的试验方法(印制电路)

Test methods for electrical materials, interconnection structures and assemblies - Part 3: Testmethods for interconnection structures (printed boards)105P;A4

IEC 61190-1-1-2002电子组件用连接材料.第1-1部分:电子组件中高质量互连用

助焊剂的要求

Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes forhigh-quality interconnections in electronics assembly41P;A4

IEC 61190-1-2-2002电子组件用连接材料.第1-2部分:电子组件中高质量互连用

焊锡的要求

Attachment materials for electronic assembly - Part 1-2: Requirements for solder pastes for high-quality interconnections in electronics assembly35P;A4

IEC 61190-1-3-2002电子组件用连接材料.第1-3部分:电子焊接用电子级钎焊合

金及有焊剂和无焊剂的固体焊料的要求

Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solderalloys and fluxed and non-fluxed solid solders for electronic soldering applications65P;A4

IEC 61191-1-1998印刷电路板组件.第1部分:总规范.使用表面安装和相关装配

技术的焊接电气和电子组件的要求

Printed board assemblies - Part 1: Generic specification - Requirements for soldered electricaland electronic assemblies using surface mount and related assembly technologies89P;A4

IEC 61191-2-1998 印刷电路板组件.第2部分:分规范.表面安装焊接组件的要求Printed board assemblies - Part 2: Sectional specification - Requirements for surface mountsoldered assemblies49P;A4

IEC 61191-3-1998 印刷电路板组件.第3部分:分规范.通孔安装焊接组件的要求Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mountsoldered assemblies31P;A4

IEC 61191-4-1998 印刷电路板组件.第4部分:分规范.端点焊接组件的要求Printed board assemblies - Part 4: Sectional specification - Requirements for terminal solderedassemblies33P;A4

IEC 61192-1-2003 钎焊电子组件的工艺要求.第1部分:总则Workmanship requirements for soldered electronic assemblies - Part 1: General156P;A4

IEC 61192-3-2002 钎焊电子组件的工艺要求.第3部分:通孔安装组件Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mountassemblies93P;A4

IEC 61192-4-2002 钎焊电子组件的工艺要求.第4部分:终端组件Workmanship requirements for soldered electronic assemblies - Part 4: Terminal assemblies59P;A4

（260） 351

IEC标准目录


开本页数

IEC 61193-1-2001 质量评定体系.第1部分:印制板装配件的缺陷注册和分析Quality assessment systems - Part 1: Registration and analysis of defects on printed boardassemblies41P;A4

IEC 61194-1992 独立式光生伏打系统的特征参数Characteristic parameters of stand-alone photovoltaic (PV) systems27P;A4

IEC 61195-1999 双头荧光灯.安全规范Double-capped fluorescent lamps - Safety specifications47P;A4

IEC 61196-1 AMD 1-1999射频电缆.第1部分:总规范.概述.定义.要求和试验方法.修改

件1

Radio-frequency cables - Part 1: Generic specification; General, definitions, requirements andtest methods; Amendment 134P;A4

IEC 61196-1-1995 射频电缆.第1部分:总规范.概述.定义.要求和试验方法Radio-frequency cables - Part 1: Generic specification; General, definitions, requirements andtest methods243P;A4

IEC 61196-2-1995射频电缆.第2部分:半刚性射频和带有聚四氟乙烯(PTFE)绝缘材料的同轴电缆的分规范

Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency andcoaxial cables with polytetrafluoroethylene (PTFE) insulation47P;A4

IEC 61196-3-1-1995射频电缆规范.第3部分:平面层布线数字通讯用同轴电缆.第1节:有效半径达到500 m,速率不低于10 Mb/s时电缆的详细

规范

Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floorwiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s7P;A4

IEC 61196-3-1998 射频电缆规范.第3部分:局域网用共轴电缆分规范Radio-frequency cables - Part 3: Sectional specification for coaxial cables for local area networks29P;A4

IEC 61196-3-2-1997射频电缆规范.第3部分:平面层布线数字通讯用同轴电缆.第2节:有效半径达到185m速率在10Mb/s(包括10Mb/s)的局

域网用带实心介质的同轴电缆的详细规范

Radio-frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floorwiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 mreach and up to 10 Mb/s9P;A4

IEC 61196-3-3-1997射频电缆规范.第3部分:平面层布线数字通讯用同轴电缆.第3节:有效半径达到185m速率在10Mb/s(包括10Mb/s)的局

域网用带泡沫介质的同轴电缆的详细规范

Radio-frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floorwiring - Detail specification for coaxial cables with foamed dielectric for local area networks of185 m reach and up to 10 Mb/s9P;A4

IEC 61196-4-1995 射频电缆.第4部分:辐射电缆分规范Radio frequency cables - Part 4: Sectional specification for radiating cables25P;A4

IEC 61197-1993 绝缘油.火焰线性传播.使用玻璃纤维的试验方法Insulating liquids; linear flame propagation; test method using a glass-fibre tape20P;A4

IEC 61198-1993 绝缘矿物油.2-糠醛和有关化合物的测定方法Mineral insulating oils; methods for the determination of 2-furfural and related compounds28P;A4

IEC 61199-1999 单头荧光灯.安全规范Single-capped fluorescent lamps - Safety specifications53P;A4

IEC 61202-1-2000 纤维光学绝缘子.第1部分:总规范Fibre optic isolators - Part 1: Generic specification53P;A4

（261） 351

IEC标准目录


开本页数

IEC 61203-1992 电工用合成有机酯.设备中变压器酯的维护指南Synthetic organic esters for electrical purposes; guide for maintenance of transformer esters inequipment15P;A4

IEC 61204 AMD 1-2001 低电压动力供应装置.直流电输出.性能特性.修改件1Low-voltage power supply devices, d.c. output - Performance characteristics; Amendment 19P;A4

IEC 61204 Edition 1.1-2001 直流输出低压供电装置.性能特性Low-voltage power supply devices, d.c. output - Performance characteristics51P;A4

IEC 61204-1993 直流输出低压供电装置.特性和安全要求Low-voltage power supply devices, d.c. output; performance characteristics and safetyrequirements

IEC 61204-3-2000 直流输出低压供电装置.第3部分:电磁兼容性(EMC)Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)75P;A4

IEC 61204-6-2000直流输出低压供电装置.第6部分:经过性能评定的低压供电

装置的要求

Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies ofassessed performance35P;A4

IEC 61205-1993 超声学.牙齿除垢装置.产品性能说明及测试Ultrasonics; dental descaler systems; measurement and declaration of the output characteristics31P;A4

IEC 61207-1-1994 气体分析器的性能说明.第1部分:概述Expression of performance of gas analyzers; part 1: general43P;A4

IEC 61207-2-1994气体分析器的性能说明.第2部分:气体中的氧(利用高温电化

检测器)

Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperatureelectrochemical sensors)27P;A4

IEC 61207-3-2002 气体分析器.性能表示.第3部分:顺磁氧气分析器Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers55P;A4

IEC 61207-6-1994 气体分析仪的性能说明.第6部分:光度分析仪Expression of performance of gas analyzers; part 6: photometric analyzers33P;A4

IEC 61209-1999航海和无线电通讯设备和系统.集成桥系统(IBS).操作和性

能要求.试验方法和要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Integrated BridgeSystems (IBS) - Operational and performance requirements, methods of testing and required testresults

IEC 61210-1993 连接装置.铜电导体的扁型速接终端的安全要求Connecting devices; flat quick-connect terminations for electrical copper conductors; safetyrequirements45P;A4

IEC 61212-1-1995 电工用工业刚性圆热固树脂层压管和棒材

Industrial rigid round laminated tubes and rods based on thermosetting resins for electricalpurposes - Part 1: General requirements19P;A4

IEC 61212-2-1995电工用工业刚性圆热固性树脂层压管和棒材.第2部分:试验

方法

Industrial rigid round laminated tubes and rods based on thermosetting resins for electricalpurposes - Part 2: Methods of test35P;A4

IEC 61212-3-1-1995电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材

料规范-活页1:圆层压轧制管

Industrial rigid round laminated tubes and rods based on thermosetting resins for electricalpurposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes25P;A4

（262） 351

IEC标准目录


开本页数


料规范-活页2:圆层压压制管

Industrial rigid round laminated tubes and rods based on thermosetting resins for electricalpurposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated mouldedtubes


料规范-活页3:圆层压压制杆

Industrial rigid round laminated tubes and rods based on thermosetting resins for electricalpurposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated mouldedrods

IEC 61213-1993 录像带上模拟声音录制.磁化极性Analogue audio recording on video tape; polarity of magnetization12P;A4

IEC 61214-1993 手持式交流电喷枪的性能要求Hand-held mains voltage operated spray guns; performance requirements18P;A4

IEC 61215-1993 晶体硅地表光伏电池组件.设计质量和型式批准Crystalline silicon terrestrial photovoltaic (PV) modules; design qualification and type approval77P;A4

IEC 61217 AMD 1-2000 放射治疗设备.坐标系、移动和标度Radiotherapy equipment - Coordinates, movements and scales; Amendment 113P;A4

IEC 61217 Edition 1.1-2002 放射治疗设备.坐标系、移动和标度Radiotherapy equipment - Coordinates, movements and scales139P;A4

IEC 61217-1996 放射治疗设备.坐标系、活动范围和刻度Radiotherapy equipment - Coordinates, movements and scales137P;A4

IEC 61219-1993 带电作业.喷枪式短路装置用的接地设备或接地舆短路设备Live working; earthing or earthing and short-circuiting equipment using lances as a short-circuiting device; lance earthing65P;A4

IEC 61223-2-10-1999医疗成像科中的评定和常规试验.第2-10部分:稳定性试验.乳腺X射线摄影术用X射线设备

Evaluation and routine testing in medical imaging departments - Part 2-10: Constancy tests - X-ray equipment for mammography33P;A4

IEC 61223-2-11-1999医疗成像科中的评定和常规试验.第2-11部分:稳定性试验.通用直接辐射摄影设备

Evaluation and routine testing in medical imaging departments - Part 2-11: Constancy tests -Equipment for general direct radiography39P;A4

IEC 61223-2-4-1994医院成像科中的评定和常规试验.第2部分:恒定试验.第4节:硬考贝摄影机

Evaluation and routine testing in medical imaging departments; part 2-4: constancy tests; hardcopy cameras57P;A4

IEC 61223-2-5-1994医院成像科中的评定和常规试验.第2部分:恒定试验.第5节:图象显示设备

Evaluation and routine testing in medical imaging departments; part 2-5: constancy tests; imagedisplay devices71P;A4

IEC 61223-2-6-1994医院成像科中的评定和常规试验.第2部分:稳定性试验.第6节:计算机断层摄影的X射线设备

Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests; X-rayequipment for computed tomography49P;A4

IEC 61223-2-7-1999医疗成像科中的评定和常规试验.第2-7部分:稳定性试验.不包括牙齿全景设备在内的口腔内牙齿辐射摄影设备

Evaluation and routine testing in medical imaging departments - Part 2-7: Constancy tests -Equipment for intra-oral dental radiography excluding dental panoramic equipment21P;A4

（263） 351

IEC标准目录


开本页数

IEC 61223-2-9-1999医疗成像科中的评定和常规试验.第2-9部分:稳定性试验.间接放射线透视和间接辐射摄影设备

Evaluation and routine testing in medical imaging departments - Part 2-9: Constancy tests -Equipment for indirect radioscopy and indirect radiography21P;A4

IEC 61223-3-1-1999医院成像科中的评定和常规试验.第3-1部分::验收试验.辐射照相和辐射显微照相系统的X-射线设备的成像性能

Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests -Imaging performance of X-ray equipment for radiographic and radioscopic systems47P;A4

IEC 61223-3-2-1996医院成像科中的评定和常规试验.第3-2部分:验收试验.乳腺

X线透视设备的成像性能

Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests -Imaging performance of mammographic X-ray equipment41P;A4

IEC 61223-3-3-1996医院成像科中的评定和常规试验.第3-3部分:验收试验.数字

减法血管造影术(DSA)用X线透视设备的成像性能

Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests -Imaging performance of X-ray equipment for digital subtraction angiography (DSA)39P;A4

IEC 61223-3-4-2000医疗成像科中的评定和常规试验.第3-4部分:验收试验.牙科

X射线设备的成像性能

Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests -Imaging performance of dental X-ray equipment35P;A4

IEC 61224-1993 核反应堆.耐温探测器的反应时间(RTD).现场测量Nuclear reactors; response time in resistance temperature detectors (RTD); in situmeasurements

IEC 61225-1993 核电站.安全用测试仪器和控制系统.供电要求Nuclear power plants; instrumentation and control systems important for safety; requirements forelectrical supplies43P;A4

IEC 61226-1993 核电站.安全测试仪器和控制系统.分类Nuclear power plants; instrumentation and control systems important for safety; classification41P;A4

IEC 61227-1993 核电厂.控制室.操作员控制器Nuclear power plants; control rooms; operator controls29P;A4

IEC 61228 AMD 1-1996太阳浴用的紫外线灯紫外线辐射量的规定和测量方法.补充

件1

Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning;Amendment 13P;A4

IEC 61228-1993 太阳浴用的紫外线灯紫外线辐射量的规定和测量方法Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning17P;A4

IEC 61229 AMD 1-1998 交流设备带电作业用刚性保护罩.第1次修订Rigid protective covers for live working on a.c. installations; Amendment 13P;A4

IEC 61229 AMD 2-2002 在交流设备上带电作业用刚性保护罩.修改件2Rigid protective covers for live working on a.c. installations; Amendment 23P;A4

IEC 61229 Edition 1.2-2002 在交流设备上带电作业用刚性保护罩Rigid protective covers for live working on a.c. installations69P;A4

IEC 61229-1993 交流设备带电作业用刚性保护罩Rigid protective covers for live working on a.c. installations62P;A4

IEC 61230-1993 带电作业.便携式接址或接址短路设备Live working; portable equipment for earthing or earthing and short-circuiting73P;A4

（264） 351

IEC标准目录


开本页数

IEC 61232-1993 电气设备用包铝钢丝Aluminium-clad steel wires for electrical purposes33P;A4

IEC 61234-1-1994 电绝缘材料水解稳定性的试验方法.第1部分:塑料薄膜Method of test for the hydrolytic stability of electrical insulating materials; part 1: plastic films15P;A4

IEC 61234-2-1997 电绝缘材料.水解稳定性的试验方法.第2部分:热模塑法Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Mouldedthermosets

IEC 61235-1993 带电作业.电工用绝缘空心管Live working; insulating hollow tubes for electrical purposes51P;A4

IEC 61236-1993 带电作业用滑动座架、电杆夹及附件Saddles, pole clamps (stick clamps) and accessories for live working67P;A4

IEC 61237-1-1994 广播磁带录像机.测量方法.第1部分:机械测量Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements31P;A4

IEC 61237-2-1995广播磁带录像机.测量方法.第2部分:模拟复合视频信号的电

气测量

Broadcast video tape recorders - Methods of measurement - Part 2: Electrical measurements ofanalogue composite video signals121P;A4

IEC 61237-3-1995广播磁带录像机测量方法.第3部分:模拟视频信号的电气测

量

Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurementsfor analogue component video signals77P;A4

IEC 61237-4-1997 广播磁带录像机.测量方法.第4部分:模拟音频性能测量Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audioperformance measurements47P;A4

IEC 61238-1-1993有铜或铝导线的电力电缆用的压缩型和机械连接器.第1部分:试验方法和要求

Compression and mechanical connectors for power cables with copper or aluminium conductors;part 1: test methods and requirements59P;A4

IEC 61239-1993核仪表.勘测用便携式γ辐射线计和谱仪的定义、要求和校

准

Nuclear instrumentation; portable gamma radiation meters and spectrometers used forprospecting; definitions, requirements and calibration21P;A4

IEC 61240-1994 压电装置.频率控制和选择用表面安装装置框图制备.总则Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) forfrequency control and selection - Genral rules19P;A4

IEC 61241-1-1-1999用于易燃粉尘存在时的电气设备. 第1-1部分:有护罩的电气

设备和表面的温度限制.设备规范

Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatusprotected by enclosures and surface temperature limitation - Specification for apparatus34P;A4

IEC 61241-1-2-1999用于易燃粉尘存在时的电气设备. 第1-1部分:有护罩的电气

设备和表面的温度限制.选择,安装和维护

Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatusprotected by enclosures and surface temperature limitation - Selection, installation andmaintenance

IEC 61241-2-1-1994用于易燃粉尘的电气设备.第2部分:试验方法.第1节:测定尘

埃小点燃温度的方法

Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods; section1: Methods for determining the minimum ignition temperatures of dust61P;A4

（265） 351

IEC标准目录


开本页数

IEC 61241-2-3-1994用于易燃粉尘的电气设备.第2部分:试验方法.第3节:尘土/空气混合小易燃能量的测定方法

Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section3: Method for determining minimum ignition energy of dust/air mixtures38P;A4

IEC 61241-3-1997用于易燃粉尘环境的电气设备.第3部分:易燃粉尘场所的现

场分类

Electrical apparatus for use in the presence of combustible dust - Part 3: Classification of areaswhere combustible dusts are or may be present41P;A4

IEC 61241-4-2001 用于易燃粉尘环境的电气设备.第4部分:"pD"型保护设备Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD"22P;A4

IEC 61242-1995 电气附件.家用和类似用电缆盘Electrical accessories - Cable reels for household and similar purposes93P;A4

IEC 61243-1 AMD 1-1997带电作业.电压检测器.第1部分:电压超过1kV的交流直流用

电容型电压检测器.修改件1

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kVa.c.; Amendment 111P;A4

IEC 61243-1-1993 现场工作.电压检测器.第1部分:电压超过1KV的交流电流用

容电器类型

Live working; voltage detectors; part 1: capacitive type to be used for voltages exceeding 1 kVa.c.

IEC 61243-2 AMD 1-1999带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻

类型.修改件1

Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kVa.c.; Amendment 19P;A4

IEC 61243-2 AMD 2-2002 带电作业.第2部分:1kV-36kV交流电压用电阻类型.修改件2Live working - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.; Amendment 23P;A4

IEC 61243-2 Edition 1.1-2000 带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻

型探测器

Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kVa.c.

IEC 61243-2 Edition 1.2-2002 带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻

类型


IEC 61243-2-1995 带电作业.电压探测器.第2部分:1kV-36kV交流电压用电阻

类型


IEC 61243-3-1998 带电作业.电压检测器.第3部分:两极低压型Live working - Voltage detectors - Part 3: Two-pole low-voltage type89P;A4

IEC 61243-5-1997 带电作业.电压检测器.第5部分:电压检测系统(VDS)Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS)111P;A4

IEC 61246 AMD 1-2002 矩形横断面磁氧化芯和配件尺寸.修改件1Magnetic oxide cores (E-cores) of rectangular cross-section and associated parts - Dimensions;Amendment 15P;A4

IEC 61246 Edition 1.1-2002 矩形截面磁性氧化磁芯(E型磁芯)及其附件.尺寸Magnetic oxide cores (E-cores) of rectangular cross-section and associated parts - Dimensions21P;A4

IEC 61246-1994 矩形断面及其相关部件的磁性氧化铁芯(E-铁心).尺寸Magnetic oxide cores (E-cores) of rectangular cross-section and associated parts; dimensions21P;A4

IEC 61247-1995 磁氧物和相伴部件制的PM芯.尺寸PM-cores made of magnetic oxides and associated parts - Dimensions25P;A4

（266） 351

IEC标准目录


开本页数

IEC 61248-1-1996 电子和电信设备用变压器和电感器.第1部分:总规范Transformers and inductors for use in electronic and telecommunication equipment - Part 1:Generic specification57P;A4

IEC 61248-2-1996电子和电信设备用变压器和电感器.第2部分:在可能批准程

序基础上信号变压器分规范

Transformers and inductors for use in electronic and telecommunication equipment - Part 2:Sectional specification for signal transformers on the basis of the capability approval procedure23P;A4


序基础上电力变压器分规范

Transformers and inductors for use in electronic and telecommunication equipment - Part 3:Sectional specification for power transformers on the basis of the capability approval procedure23P;A4


序基础上转换供电方式的电力变压器分规范

Transformers and inductors for use in electronic and telecommunication equipment - Part 4:Sectional specification for power transformers for switched mode power supplies (SMPS) on thebasis of the capability approval procedure41P;A4


序基础上脉冲变压器分规范

Transformers and inductors for use in electronic and telecommunication equipment - Part 5:Sectional specification for pulse transformers on the basis of the capability approval procedure23P;A4


序基础上电感器分规范

Transformers and inductors for use in electronic and telecommunication equipment - Part 6:Sectional specification for inductors on the basis of the capability approval procedure23P;A4

IEC 61248-7-1997电子和电信设备用变压器和电感器.第7部分:以性能认证程

序为基础的高频电感器和中频变压器分规范

Transformers and inductors for use in electronic and telecommunication equipment - Part 7:Sectional specification for high-frequency inductors and intermediate frequency transformers onthe basis of the capability approval procedure47P;A4

IEC 61249-2-10-2003印制板和其它互连结构用材料.第2-10部分:包被和非包被

增强基材.规定了易燃性的包铜改良或未改良的氰酸酯溴化

环氧编织E型玻璃纤维增强层压板(垂直燃烧试验)

Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced basematerials clad and unclad; Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad54P;A4

IEC 61249-2-12-1999印制板材料和其它互联结构.第2-12部分:包被或非包被增

强基底材料分规范装置,限定可燃性的铜包被的非编织的芳

香聚酰胺层状环氧化物

Materials for printed boards and other interconnecting structures - Part 2-12: Sectionalspecification set for reinforced base materials, clad and unclad - Epoxide non-woven aramidlaminate of defined flammability, copper-clad

IEC 61249-2-13-1999印制板材料和其它互联结构.第2-13部分:包被或非包被增

强基底材料分规范装置,限定可燃性的铜包被的非编织的芳

香聚酰胺层状氰酯

Materials for printed boards and other interconnecting structures - Part 2-13: Sectionalspecification set for reinforced base materials, clad and unclad - Cyanate ester non-wovenaramid laminate of defined flammability, copper-clad16P;A4

IEC 61249-2-18-2002印制板和其它互连结构用材料.第2-18部分:包被或非包被

增强基材.规定了易燃性的覆铜非编织玻璃纤维增强层压板

(垂直燃烧试验)

Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced basematerials, clad and unclad; Polyester non-woven fibreglass reinforced laminated sheet of definedflammability (vertical burning test), copper-clad41P;A4

（267） 351

IEC标准目录


开本页数

IEC 61249-2-19-2001印制板和其它互连结构用材料.第2-19部分:被包和非包被

增强基材料.规定燃烧性的环氧交叉帘布层线性纤维玻璃增

强包铜的叠层板(垂直燃烧试验)

Materials for printed boards and other interconnection structures - Part 2-19: Reinforced basematerials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets ofdefined flammability (vertical burning test), copper clad37P;A4

IEC 61249-2-4-2001印制板和其它互连结构用材料.第2-4部分:包被和非包被增

强基材.规定了易燃性的覆铜聚酯非编织/编织玻璃纤维层

压板(垂直燃烧试验)

Materials for printed boards and other interconnection structures - Part 2-4: Reinforced basematerials, clad and unclad; Polyester non-woven/woven fibreglass laminated sheet of definedflammability (vertical burning test), copper-clad39P;A4


强基材.规定了易燃性的环氧编织E级层压板(垂直燃烧试

验)

Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced basematerials clad and unclad; Epoxide woven E-glass laminated sheet of defined flammability(vertical burning test), copper-clad41P;A4


强基材.规定了易燃性的包铜改良溴化环氧编织玻璃纤维增

强层压板(垂直燃烧试验)

Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced basematerials clad and unclad; Modified brominated epoxide woven fiberglass reinforced laminatedsheets of defined flammability (vertical burning test), copper-clad54P;A4

IEC 61249-2-9-2003

印制板和其它互连结构用材料.第2-9部分:包被和非包被增

强基材.规定了易燃性的包铜二顺丁烯二酰亚胺/三嗪改良

或未改良的环氧编织E型玻璃纤维增强层压板(垂直燃烧试

验)

Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced basematerials clad and unclad; Bismaleimide/triazine modified epoxide or unmodified, woven E-glassreinforced laminated sheets of defined flammability (vertical burning test), copper-clad54P;A4

IEC 61249-3-3-1999印制板和其它互连结构用材料.第3-3部分:包层和未包层非

增强基底材料(用于挠性印制板)的分规范集.粘着的涂覆挠

性聚酯薄膜

Materials for printed boards and other interconnecting structures - Part 3-3: Sectionalspecification set for unreinforced base materials, clad and unclad (intended for flexible printedboards) - Adhesive coated flexible polyester film13P;A4


增强基底材料(用于挠性印制板)的分规范集.粘着的涂覆挠

性聚酰亚胺薄膜

Materials for printed boards and other interconnecting structures - Part 3-4: Sectionalspecification set for unreinforced base materials, clad and unclad (intended for flexible printedboards) - Adhesive coated flexible polyimide film14P;A4


增强基底材料(用于挠性印制板)的分规范集.贴花粘性薄膜

Materials for printed boards and other interconnecting structures - Part 3-5: Sectionalspecification set for unreinforced base materials, clad and unclad (intended for flexible printedboards) - Transfer adhesive films12P;A4

IEC 61249-5-1-1995连接结构用材料.第5部分:带和不带涂层的导电箔和薄膜的

分规范.第1节:铜箔(用于生产铜涂覆基材)

Materials for interconnection structures - Part 5: Sectional specification set for conductive foilsand films with and without coatings - Section 1: Copper foils (for the manufacture of copper-cladbase materials)39P;A4

IEC 61249-5-4-1996内部连接结构用材料.第5部分:有或无涂层的导电箔和导电

薄膜分规范.第4节:导电墨水

Materials for interconnection structures - Part 5: Sectional specification set for conductive foilsand films with or without coatings - Section 4: Conductive inks27P;A4

（268） 351

IEC标准目录


开本页数

IEC 61249-7-1-1995互连接装置用材料.第7部分:芯约束用材料分规范.第1节:铜/殷钢/铜

Materials for interconnection structures - Part 7: Sectional specification set for restraining corematerials - Section 1: Copper/Invar/copper13P;A4

IEC 61249-8-7-1996互连接装置用材料.第8部分:非导电薄膜和涂层装置分规范.第7节:打印油墨

Materials for interconnection structures - Part 8: Sectional specification set for non-conductivefilms and coatings - Section 7: Marking legend inks26P;A4

IEC 61249-8-8-1997互连结构材料.第8部分:不导电薄膜和涂层分规范集.第8节:非永久高聚物涂层

Materials for interconnection structures - Part 8: Sectional specification set for non-conductivefilms and coatings - Section 8: Temporary polymer coatings19P;A4

IEC 61250-1994 核反应堆.安全控制装置.冷却设备中核泄漏检测Nuclear reactors; instrumentation and control systems important for safety; detection of leakagein coolant systems29P;A4

IEC 61252 AMD 1-2000 电声学.专用测声表规范Electroacoustics - Specifications for personal sound exposure meters; Amendment 119P;A4

IEC 61252 Edition 1.1-2002 电声学.个人测声表规范Electroacoustics - Specifications for personal sound exposure meters59P;A4

IEC 61252-1993 电声学.个人测声表规范Electroacoustics; specifications for personal sound exposure meters45P;A4

IEC 61253-1-1993压电陶瓷谐振器规范.电子元器件质量评定体系.第1部分:总规范.资格认可

Piezoelectric ceramic resonators; a specification in the IEC quality assessment system forelectronic components (IECQ); part 1: generic specification; qualification approval45P;A4

IEC 61253-2-1-1993压电陶瓷谐振器.电子元器件质量评定体系.第2部分:规范.资格认可.第1节:E级评定

Piezoelectric ceramic resonators; a specification in the IEC quality assessment system forelectronic components (IECQ); part 2: sectional specification; qualification approval; section 1:blank detail specification; assessment level E21P;A4

IEC 61253-2-1993压电陶瓷谐振器.电子元器件质量评定体系.第2部分:区域分

规范.资格认可

Piezoelectric ceramic resonators; a specification in the IEC quality assessment system forelectronic components (IECQ); part 2: sectional specification; qualification approval43P;A4

IEC 61254-1993 家用电动剃刀.性能测量法Electric shavers for household use; methods for measuring the performance90P;A4

IEC 61255-1994 家用电热垫性能的测量方法Household electric heating pads - Methods for measuring performance17P;A4

IEC 61256-1996 辐射防护仪表设备.洗衣机放射污染监测用监视器的安装Radiation protection instrumentation - Installed monitors for the detection of radioactivecontamination of laundry57P;A4

IEC 61260 AMD 1-2001 电声学.倍频带和分倍频带滤波器.修改件1Electroacoustics - Octave-band and fractional-octave-band filters; Amendment 121P;A4

IEC 61260-1995 电声学.分倍频程频带和频程频带用倍频滤波器Electroacoustics - Octave-band and fractional-octave-band filters53P;A4

（269） 351

IEC标准目录


开本页数

IEC 61261-1-1994电子设备用压电陶瓷滤波器.IEC质量评定系统的电子元件

的规范.第1部分:一般规范.合格评定

Piezoelectric ceramic filters for use in electronic equipment; a specification in the IEC qualityassessment system for electronic components (IECQ); part 1: generic specification; qualificationapproval51P;A4

IEC 61261-2-1-1994电子设备用压电陶瓷滤波器.IEC质量评定系统的电子元件

的规范.第2部分:分规范.合格评定.第1节:空白详细规范.E级评定

Piezoelectric ceramic filters for use in electronic equipment; a specification in the IEC qualityassessment system for electronic components (IECQ); part 2: sectional specification;qualification approval; section 1: blank detail specification; assessment level E19P;A4

IEC 61261-2-1994电子设备用压电陶瓷滤波器.IEC质量评定系统的电子元件

的规范.第2部分:分规范.合格评定

Piezoelectric ceramic filters for use in electronic equipment; a specification in the IEC qualityassessment system for electronic components (IECQ); part 2: sectional specification;qualification approval43P;A4

IEC 61262-1-1994医疗电气设备.电光X射线图象增强器的特性.第1部分:入口

尺寸的测定

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1:Determination of the entrance field size21P;A4

IEC 61262-2-1994医疗电气设备.电光X射线图象增强器的特性.第2部分:变换

系数的测定

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2:Determination of the conversion factor21P;A4

IEC 61262-3-1994医疗电气设备.电光X射线图象增强器的特性.第3部分:亮度

分配和亮度不均匀的测定

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3:Determination of the luminance distribution and luminance non-uniformity25P;A4

IEC 61262-4-1994医疗电气设备.电光X射线图象增强器的特性.第4部分:图象

失真的测定

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4:Determination of the image distortion23P;A4

IEC 61262-5-1994医疗电气设备.电光X射线图象增强器的特性.第5部分:检测

性量子效率的测定

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5:Determination of the detective quantum efficiency35P;A4

IEC 61262-6-1994医疗电气设备.电光X射线图象增强器的特性.第3部分:对比

率和杂光指数的测定

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6:Determination of the contrast ratio and veiling glare index25P;A4

IEC 61262-7-1995医疗电气设备.电光X射线影像增强器特性.第7部分:调制传

递函数测定

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part-7:Determination of the modulation transfer function35P;A4

IEC 61263-1994 辐射防护仪表.矿快速测量用便携的潜在α能量测试仪Radiation protection instrumentation - Portable potential alpha energy meter for rapidmeasurements in mines53P;A4

IEC 61264-1998 高压开关控制装置用陶瓷增压空芯绝缘子Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear22P;A4

（270） 351

IEC标准目录


开本页数

IEC 61265-1995电声学.航空噪声测量说明.运输机噪声检定测量三分之一

带宽倍频声压级装置的性能要求

Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements forsystems to measure one-third-octave band sound pressure levels in noise certification oftransport-category aeroplanes29P;A4

IEC 61266-1994超声波.手持式传感式多普勒胎儿心跳探测仪.性能要求及

测量和记录方法

Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirementsand methods of measurement and reporting60P;A4

IEC 61267-1994 X射线诊断设备.测定特性的放射条件Medical diagnostic X-ray equipment - Radiation conditions for use in the determination ofcharacteristics59P;A4

IEC 61269-1-1-1994 光纤端件.第1部分第1节:空白详细规范Fibre optic terminus sets - Part 1-1: Blank detail specification21P;A4

IEC 61270-1-1996 微波炉用电容器.第1部分:总则Capacitors for microwave ovens - Part 1: General39P;A4

IEC 61274-1-1-1994 光纤适配器.第1部分第1节:空白详细规范Fibre optic adaptors - Part 1-1: Blank detail specification19P;A4

IEC 61274-1-1994 光纤适配器.第1部分:总规范Fibre optic adaptors - Part 1: Generic specification39P;A4

IEC 61275-1997辐射防护仪器.测量环境中的放射性核素.使用锗探测器的

现场光子光谱测定系统

Radiation protection instrumentation - Measurement of discrete radionuclides in the environment- In situ photon spectrometry system using a germanium detector55P;A4

IEC 61277-1995 地面光电功率产生装置.总则和指南Terrestrial photovoltaic (PV) power generating systems - General and guide41P;A4

IEC 61280-1-1-1998光纤通信分系统基本试验程序.第1-1部分:一般通信分系统

的试验程序.单模光纤电缆用发射机光输出功率的测量

Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures forgeneral communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable

IEC 61280-1-3-1998光纤通信分系统基本试验程序.第1-3部分:一般通信分系统

的试验程序.中心波长和光谱宽度的测量

Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures forgeneral communication subsystems - Central wavelength and spectral width measurement29P;A4

IEC 61280-1-4-2003纤维光学通信子系统试验程序.第1-4部分:一般通信子系统.多模纤维激光发射机用二维近场数据的采集和换算

Fibre optic communication subsystem test procedures - Part 1-4: General communicationsubsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre lasertransmitters26P;A4

IEC 61280-2-1-1998光纤通信分系统基本试验程序.第2-1部分:数字系统的试验

程序.接收机灵敏度和过载测量

Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures fordigital systems - Receiver sensitivity and overload measurement23P;A4

IEC 61280-2-2-1998纤维光学通信子系统基本试验程序.第2-2部分:数字系统试

验程序.光学直视模型、波形和衰减比率

Fibre optic communication subsystem basic test procedures - Part 2-2: Test procedures fordigital systems - Optical eye pattern, waveform, and extinction ratio49P;A4

（271） 351

IEC标准目录


开本页数

IEC 61280-2-4-1998 光纤通信亚系统基本试验过程.第2-4部分:数字系统的试验

过程.Bit比率公差测量

Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures fordigital systems - Bit-rate tolerance measurement

IEC 61280-2-5-1998 光纤通信亚系统基本试验过程.第2-5部分:数字系统的试验

过程.图像跳动传输功能的测量

Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures fordigital systems - Jitter transfer function measurement

IEC 61280-2-8-2003光纤通信子系统基本试验过程.数字系统.第2-8部分:用品质

因数测量法测定低位错率

Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determinationof low BER using Q-factor measurements36P;A4

IEC 61280-2-9-2002光纤通信子系统试验程序.第2-9部分:密集波长的区分多层

系统用光信号对噪音比率测量的数字系统

Fibre optic communication subsystem test procedures - Part 2-9: Digital systems; Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems33P;A4

IEC 61280-4-2-1999光纤通信分系统基本试验程序.第4-2部分:光纤电缆性能指

标.单模光纤电缆性能衰减

Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant -Single-mode fibre optic cable plant attenuation27P;A4

IEC 61281-1-1999 光纤通信亚系统.第1部分:一般规范 Fibre optic communication subsystems - Part 1: Generic specification

IEC 61283-1995辐射保护仪器.直接读个人用放射剂量评定监测仪.χ,γ和高

能β辐射

Radiation protection instrumentation - Direct reading personal dose equivalent (rate) monitors -X, gamma and high energy beta radiation65P;A4

IEC 61284-1997 架空线.配件的要求和试验方法Overhead lines - Requirements and tests for fitting131P;A4

IEC 61285-1994 工业处理控制.分析器罩的安全Industrial-process control - Safety of analyser houses53P;A4

IEC 61286-2001 信息技术.电工技术文献准备及信息交换用编码图形字符集Information technology - Coded graphic character set for use in the preparation of documentsused in electrotechnology and for information interchange27P;A4

IEC 61287-1-1995 安装在铁路车辆上的电力变换器.第1部分:特性和试验方法Power convertors installed on board rolling stock - Part 1: Characteristics and test methods103P;A4

IEC 61290-10-2-2003光学放大器.试验方法.第10-2部分:多道参数.选通光频谱分

析仪脉冲法

Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using agated optical spectrum analyzer40P;A4

IEC 61290-10-3-2002 光学放大器.试验方法.第10-3部分:多道参数.探测法Optical amplifiers - Test methods - Part 10-3: Multichannel parameters; Probe methods18P;A4

IEC 61290-11-1-2003光学放大器试验方法.第11-1部分:偏振模式分散.琼斯矩阵

特征分析法(JME)

Optical amplifier test methods - Part 11-1: Polarization mode dispersion; Jones matrixeigenanalysis method (JME)34P;A4

IEC 61290-1-1-1998 光纤放大器.基本规范.第1-1部分:增益参数的测试方法.光谱分析器

Optical fibre amplifiers - Basic specification - Part 1-1: Test methods for gain parameters -Optical spectrum analyzer

IEC 61290-1-2-1998光纤放大器.基本规范.第1-2部分:获得参数的试验方法.电气频谱分析仪

Optical fibre amplifiers - Basic specification - Part 1-2: Test methods for gain parameters -Electrical spectrum analyzer27P;A4

（272） 351

IEC标准目录


开本页数

IEC 61290-1-3-1998 光纤放大器.基本规范.第1-3部分:获得参数的试验方法.光电仪

Optical fibre amplifiers - Basic specification - Part 1-3: Test methods for gain parameters -Optical power meter

IEC 61290-2-1-1998 光纤放大器.基本规范.第2-1部分:光电参数的试验方法.光谱分析仪

Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters- Optical spectrum analyzer

IEC 61290-2-2-1998光纤放大器.基本规范.第2-2部分:光电参数的试验方法.电气频谱分析仪

Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for optical power parameters- Electrical spectrum analyzer23P;A4

IEC 61290-2-3-1998光纤放大器.基本规范.第2-3部分:电力参数的试验方法.光电仪

Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for power parameters -Optical power meter23P;A4

IEC 61290-3-2000 光纤放大器.基本规范.第3部分:噪音数字参数的试验方法Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters21P;A4

IEC 61290-3-2-2003光学放大器.第3-2部分:噪音数字参数的试验方法.电频谱分

析仪法

Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrumanalyzer method44P;A4

IEC 61290-5-1-2000光纤放大器.基本规范.第5-1部分:反射参数的试验方法.光谱分析仪

Optical fibre amplifiers - Basic specification - Part 5-1: Test methods for reflectance parameters -Optical spectrum analyser23P;A4

IEC 61290-5-3-2002光纤放大器.基本规范.第5-3部分:反射参数的试验方法.使用电谱分析仪的反射公差试验法

Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters;Reflectance tolerance test method using electrical spectrum analyzer21P;A4

IEC 61290-6-1-1998光纤放大器.基本规范.第6-1部分:泵漏参数的试验方法.光信号分离器

Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakageparameters - Optical demultiplexer21P;A4

IEC 61290-7-1-1998光纤放大器.基本规范.第7-1部分:谱带外插入损失的试验方

法.滤光计

Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertionlosses - Filtered optical power meter17P;A4

IEC 61291-1-1998 光纤放大器.第1部分:一般规范Optical fibre amplifiers - Part 1: Generic specification47P;A4

IEC 61291-2-2000 光纤放大器.第2部分:数字应用,性能规范模板Optical fibre amplifiers - Part 2: Digital applications; performance specification template21P;A4

IEC 61291-5-2-2002光纤放大器.第5-2部分:合格评定规范.光纤放大器可靠性合

格评定

Optical amplifiers - Part 5-2: Qualification specifications; Reliability qualification for optical fibreamplifiers47P;A4

IEC 61293-1994 与电供给相关的带有额定值的电气设备的标记.安全要求Marking of electrical equipment with ratings related to electrical supply - Safety requirements21P;A4

IEC 61297-1995 工业过程控制系统.鉴定用自适应控制器的分类Industrial-process control systems - Classification of adaptive controllers for the purpose ofevaluation

（273） 351

IEC标准目录


开本页数

IEC 61298-1-1995加工测量和控制装置.评定性能用一般方法和程序.第1部分:一般考虑

Process measurement and control devices - General methods and procedures for evaluatingperformance - Part 1: General considerations35P;A4

IEC 61298-2-1995过程测量和控制装置.性能鉴定用一般方法和程序.第2部分:参考条件下的试验

Process measurement and control devices - General methods and procedures for evaluatingperformance - Part 2: Tests under reference conditions51P;A4

IEC 61298-3-1998过程测量和控制装置.性能评定用一般方法和程序.第3部分:影响量作用的测试

Process measurement and control devices - General methods and procedures for evaluatingperformance - Part 3: Tests for the effects of influence quantities57P;A4

IEC 61298-4-1995加工测量和控制装置.评定性能用一般方法和程序.第4部分:评定报告含量

Process measurement and control devices - General methods and procedures for evaluatingperformance - Part 4: Evaluation report content25P;A4

IEC 61300-1-1995光纤互联装置和无源部件.基本试验和测量步骤.第1部分:总则和指南

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 1: General and guidance31P;A4

IEC 61300-2-10-1995光纤互联装置和无源部件.基本试验和测量步骤.第2部分第

10节:抗压碎试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-10: Tests - Crush resistance9P;A4


11节:试验.轴向压缩

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-11: Tests - Axial compression9P;A4

IEC 61300-2-1-2003光纤互联装置和无源部件.基本试验和测量步骤.第2-1部分:振动(正弦)试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-1: Tests; Vibration (sinusoidal)14P;A4


12节:试验.冲击

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-12: Tests - Impact13P;A4


13节:加速度试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-13: Tests - Acceleration7P;A4

IEC 61300-2-14-1997光纤互连设备和无源元件.基本试验和测量程序.第2部分第

14节: 大输入功率

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-14: Tests - Maximum input power11P;A4


15节:试验.连轴机械的扭矩强度

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-15: Tests - Torque strength of coupling mechanism11P;A4


16节:霉菌生长试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-16: Tests - Mould growth9P;A4

（274） 351

IEC标准目录


开本页数

IEC 61300-2-17-2003光纤互连装置和无源部件.基本试验和测量步骤.第2-17部分:冷式法

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-17: Tests; Cold12P;A4

IEC 61300-2-18-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-18部分:干热.耐高温试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-18: Tests - Dry heat; High temperature endurance9P;A4


19节:湿热(定态)试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-19: Tests - Damp heat (steady state)9P;A4

IEC 61300-2-21-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-21部分:复合温湿度往复试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-21: Tests - Composite temperature-humidity cyclic test7P;A4

IEC 61300-2-2-2003光纤互连装置和无源部件.基本试验和测量步骤.第2-2部分:配合持久性

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-2: Tests; Mating durability12P;A4

IEC 61300-2-22-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-22部分:温度变化试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-22: Tests - Change of temperature7P;A4

IEC 61300-2-23-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-23部分:光纤设备无增压闭路密封试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-23: Tests - Sealing for not-pressurized closures of fibre optic devices11P;A4

IEC 61300-2-24-1999光纤互联装置和无源部件.基本试验和测量步骤.第2-24部分:试验.对陶瓷校直夹板套筒加负荷的筛析试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stressapplication

IEC 61300-2-25-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-25部分:试验.终止阀的密封耐久力

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-25: Tests - Sealing endurance for closures9P;A4

IEC 61300-2-26-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-26部分:咸雾试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-26: Tests - Salt mist9P;A4

IEC 61300-2-27-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-27部分:试验.灰尘.层流

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-27: Tests - Dust - Laminar flow9P;A4

IEC 61300-2-28-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-28部分:工业大气(二氧化硫)试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide)7P;A4

IEC 61300-2-29-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-29部分:低气压试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-29: Tests - Low air pressure7P;A4

（275） 351

IEC标准目录


开本页数

IEC 61300-2-30-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-30部分:太阳辐射试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-30: Tests - Solar radiation9P;A4

IEC 61300-2-31-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-31部分:试验.核辐射

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-31: Tests - Nuclear radiation21P;A4


3节:静态剪切强度试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-3: Tests - Static shear load7P;A4

IEC 61300-2-32-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-32部分:试验.水蒸气渗透性

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-32: Tests - Water vapour permeation7P;A4

IEC 61300-2-33-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-33部分:闭路的组装与拆卸试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-33: Tests - Assembly and disassembly of closures7P;A4

IEC 61300-2-34-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-34部分:耐溶剂和污染液体试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids9P;A4

IEC 61300-2-35-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-35部分:试验.电缆下垂

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-35: Tests - Cable nutation9P;A4

IEC 61300-2-36-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-36部分:试验.易燃性(着火危险)

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-36: Tests - Flammability (fire hazard)7P;A4

IEC 61300-2-37-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-37部分:试验.终止阀用弯曲电缆

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-37: Tests - Cable bending for closures7P;A4

IEC 61300-2-38-1995光纤互联装置和无源部件.基本试验和测量步骤.第2-38部分:光纤设备增压闭路的密封试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-38: Tests - Sealing for pressurized closures of fibre optic devices7P;A4


39节:试验.外部磁场的灵敏性

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-39: Tests - Susceptibility to external magnetic fields11P;A4

IEC 61300-2-40-2000光纤互联装置和无源部件.基本试验和测量步骤.第2-40部分:试验.单模式调谐有角度光纤互联器的衰减筛分试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-40: Tests; Screen testing of attenuation of single-mode tuned angled opticalconnectors15P;A4

（276） 351

IEC标准目录


开本页数

IEC 61300-2-41-1998光纤互联装置和无源部件.基本试验和测量步骤.第2-41部分:试验.单模式调谐无角度光纤互联器

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-41: Tests - Screen testing of attenuation of single-mode tuned non-angledoptical fibre connectors23P;A4


4节:纤维/电缆牢固性试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-4: Tests - Fibre/cable retention9P;A4

IEC 61300-2-42-1998光纤互联装置和无源部件.基本试验和测量步骤.第2-42部分:连接件静态边负载

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-42: Tests - Static side load for connectors7P;A4

IEC 61300-2-43-1999光纤互联装置和无源部件.基本试验和测量步骤.第2-43部分:试验.单模PC光纤连接器回程损失的筛析试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-43: Tests - Screen testing of return loss of single mode PC optical fibreconnectors

IEC 61300-2-45-1999光纤互联装置和无源部件.基本试验和测量步骤.第2-45部分:试验.通过浸水的持久性试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-45: Tests - Durability test by water immersion9P;A4

IEC 61300-2-48-2003光纤互连器件和无源元件.基本试验和测量程序.第2-48部分:试验.温度-湿度循环

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-48: Tests; Temperature-humidity cycling14P;A4

IEC 61300-2-5-2002光纤互连器件和无源元件.基本试验和测量程序.第2-5部分:试验.扭绞

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-5: Tests; Torsion/twist7P;A4


6节:试验.联接机械的抗拉强度

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-6: Tests - Tensile strength of coupling mechanism11P;A4


7节:弯曲力矩试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-7: Tests - Bending moment7P;A4


8节:连续冲击试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-8: Tests - Bump7P;A4


9节:冲击试验

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 2-9: Tests - Shock7P;A4

IEC 61300-3-10-1995光纤互联装置和无源部件.基本试验和测量步骤.第3-10部分:检查和测量.标准保持力

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-10: Examinations and measurements - Gauge retention force7P;A4

IEC 61300-3-11-1995光纤互联装置和无源部件.基本试验和测量步骤.第3-11部分:检查和测量.连接和分离力

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-11: Examinations and measurements - Engagement and separation forces7P;A4

（277） 351

IEC标准目录


开本页数

IEC 61300-3-1-1995光纤互连装置和无源部件.基本试验和测量步骤.第3-1部分:检查和测量.外观检查

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-1: Examinations and measurements - Visual examination7P;A4


12节:检验和测量.由单模式光纤元件衰减产生的偏振:点阵

计算法

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-12: Examinations and measurements - Polarization dependence ofattenuation of a single-mode fibre optic component: Matrix calculation method15P;A4

IEC 61300-3-13-1995光纤互联装置和无源部件.基本试验和测量步骤.第3-13部分:检查和测量.光纤继电器的稳定性控制

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch11P;A4

IEC 61300-3-14-1995光纤互联装置和无源部件.基本试验和测量步骤.第3-14部分:检查和测量.不同的衰减器的衰减装置的准确性和可重

复性

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of theattenuation settings of a variable attenuator15P;A4

IEC 61300-3-15-1995光纤互联装置和无源部件.基本试验和测量步骤.第3-15部分:凸状抛光金属端面偏心率

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-15: Measurements - Eccentricity of a convex polished ferrule endface13P;A4

IEC 61300-3-16-2003光纤互联装置和无源部件.基本试验和测量程序.第3-16部分:检查和测量.套管球形抛光端面的曲率半径

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-16: Examinations and measurements; Endface radius of spherically polishedferrules20P;A4

IEC 61300-3-17-1999光纤互联装置和无源部件.基本试验和测量步骤.第3-17部分:检查和测量.抛光角套圈的端面角

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-17: Examinations and measurements - Endface angle of angle-polishedferrules

IEC 61300-3-18-1995光纤互联装置和无源部件.基本试验和测量步骤.第3-18部分:一个倾斜的角的端面连接器的键控准确性

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-18: Examinations and measurements - Keying accuracy of an angledendface connector11P;A4


19节:检验和测量.由单模式光纤元件回波损耗产生的偏振

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-19: Examinations and measurements - Polarization dependence of returnloss of a single-mode fibre optic component19P;A4

IEC 61300-3-20-2001光纤互连装置和无源部件.基本试验和测量步骤.第3-20部分:检验和测量.光纤分路器指令

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branchingdevices

IEC 61300-3-21-1998光纤互联装置和无源部件.基本试验和测量步骤.第3-21部分:试验和测量.接通和返回时间

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-21: Examinations and measurements; switching time and bounce time9P;A4

（278） 351

IEC标准目录


开本页数

IEC 61300-3-2-1999光纤互联装置和无源部件.基本试验和测量步骤.第3-2部分:检验和测量.单模纤维光学装置中天线偏振依赖性

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-2: Examinations and measurements - Polarization dependence ofattenuation in a single-mode fibre optic device33P;A4


22节:检验和测量.金属加固环的压缩力

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-22: Examinations and measurements - Ferrule compression force9P;A4

IEC 61300-3-23-1998光纤互联装置和无源部件.基本试验和测量步骤.第3-23部分:试验和测量.与金属箍末端有关的纤维位置

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-23: Examination and measurements; fibre position relative to ferrule endface35P;A4

IEC 61300-3-24-1999光纤互联装置和无源部件.基本试验和测量步骤.第3-24部分:检验和测量.偏振维护纤维用光学连接器的键控精确度

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-24: Examinations and measurements - Keying accuracy of opticalconnectors for polarization maintaining fibre19P;A4


25节:检验和测量.装配有光纤的金属加固环间的同心度

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-25: Examinations and measurements - Concentricity of the ferrules andferrules with fibre installed13P;A4

IEC 61300-3-26-2002光纤互连设备和无源元件.基本试验和测量程序.第3-26部分:检验和测量.光纤和金属加固环轴线间角度误差的测量

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-26: Examinations and measurements; Measurement of the angularmisalignment between fibre and ferrule axes29P;A4


27节:检验和测量.多路连接器插头的孔定位测量方法

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-27: Examinations and measurements - Measurement method for the holelocation of a multiway connector plug11P;A4

IEC 61300-3-28-2002光纤互连设备和无源元件.基本试验和测量程序.第3-28部分:检验和测量.瞬时损耗

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-28: Examinations and measurements; Transient loss13P;A4

IEC 61300-3-30-2003光纤互连器件和无源元件.基本试验和测量程序.第3-30部分:检查和测量.单套管多纤连接器上的光纤位置和抛光角

度

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-30: Examinations and measurements; Polish angle and fibre position onsingle ferrule multifibre connectors22P;A4

IEC 61300-3-31-2003光纤互连装置和无源部件.基本试验和测量程序.第3-34部分:检验和测量.纤维光学源的耦合功率比测量

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement forfibre optic sources24P;A4

（279） 351

IEC标准目录


开本页数

IEC 61300-3-3-2003光纤互连装置和无源部件.基本试验和测量步骤.第3-3部分:检验和测量.衰减和回波损耗中变化的动态监控

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-3: Examinations and measurements; Active monitoring of changes inattenuation and return loss24P;A4

IEC 61300-3-33-1999光纤互联装置和无源部件.基本试验和测量步骤.第3-33部分:金属箍拔出力

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-33: Examinations and measurements - Ferrule withdrawal force17P;A4

IEC 61300-3-34-2001纤维光学互连器件和无源元件.基本试验和测量程序.第3-34部分:检查和测量.随机插合连接器的衰减

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-34: Examinations and measurements; Attenuation of random matedconnectors

IEC 61300-3-36-2000光纤互连装置和无源部件.基本试验和测量步骤.第3-36部分:检验和测量.纤维光学连接器金属箍的内径和外径的测

量方法

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-36: Examinations and measurements - Measurement methods for the insideand outside diameters of fibre optic connector ferrules19P;A4

IEC 61300-3-39-1997光纤互连装置和无源部件.基本试验和测量步骤.第3-39部分:检查和测量.PC光学连接器标准插头的选择

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-39: Examinations and measurements - PC optical connector reference plugselection21P;A4

IEC 61300-3-40-1998光纤互联装置和无源部件.基本试验和测量步骤.第3-40部分:检验和测量.极化维护(pm)的纤维引线连接器的衰减比

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-40: Examinations and measurements - Extinction ratio of a polarizationmaintaining (pm) fibre pigtailed connector11P;A4

IEC 61300-3-4-2001光纤互联装置和无源部件.基本试验和测量步骤.第3-4部分:检验和测量.衰减

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-4: Examinations and measurements; Attenuation35P;A4

IEC 61300-3-5-2000光纤互联装置和无源部件.基本试验和测量步骤.第3-5部分:检验和测量.衰减的波长

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-5: Examinations and measurements; Wavelength dependence of attenuation9P;A4

IEC 61300-3-6 Edition 1.2-1999光纤互联设备和无源元件.基本试验和测量程序.第3-6部分:检验和测量.回程损耗

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-6: Examinations and measurements - Return loss41P;A4

IEC 61300-3-6-2003光纤互连装置和无源部件.基本试验和测量步骤.第3-6部分:检验和测量.回波损耗

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-6: Examinations and measurements; Return loss32P;A4

IEC 61300-3-7-2000光纤互连装置和无源部件.基本试验和测量步骤.第3-7部分:检查和测量.衰减和回程损耗的波长依赖关系

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-7: Examinations and measurements; Wavelength dependence of attenuationand return loss11P;A4

（280） 351

IEC标准目录


开本页数

IEC 61300-3-8-1995光纤互联装置和无源部件.基本试验和测量步骤.第3-8部分:检查和测量.室内光的敏感度

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-8: Examinations and measurements - Ambient light susceptibility11P;A4


9节:检验和测量.远端串音

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-9: Examinations and measurements - Far-end crosstalk13P;A4

IEC 61301-1994 核装置.NIM仪器用数字总线Nuclear instrumentation - Digital bus for NIM instruments25P;A4

IEC 61302-1995 电气绝缘材料.抗电弧和侵蚀性的评定.常规轮浸蚀试验Electrical insulating materials - Method to evaluate the resistance to tracking and erosion -Rotating wheel dip test25P;A4

IEC 61303-1994 医疗电气设备.放射性核素调整器.描述性能的特殊方法Medical electrical equipment - Radionuclide calibrators - Particular methods for describingperformance29P;A4

IEC 61304-1994 核仪表.液体.闪烁计数计.运行性能验证Nuclear instrumentation - Liquid-scintillation counting systems - Performance verification43P;A4

IEC 61305-1-1995家用高保真音响设备和系统.性能检测和说明的方法.第1部分:总则

Household high-fidelity audio equipment and systems - Methods of measuring and specifying theperformance - Part 1: General7P;A4

IEC 61305-2-1997家用高保真音响设备和系统.性能检测和说明的方法.第2部分:FM 无线电调谐器

Household high-fidelity audio equipment and systems - Methods of measuring and specifying theperformance - Part 2: FM radio tuners17P;A4

IEC 61305-3-1995家用高保真音响设备和系统.性能检测和说明的方法.第3部分:放大器

Household high-fidelity audio equipment and systems - Methods of measuring and specifying theperformance - Part 3: Amplifiers11P;A4

IEC 61306-1994 核装置.以核辐射测量装置为基础的微处理机Nuclear instrumentation - Microprocessor based nuclear radiation measuring devices69P;A4

IEC 61307-1994 工业微波加热装置.测定输出功率的试验方法Industrial microwave heating installations - Test methods for the determination of power output15P;A4

IEC 61308-1994 高频电介质加热装置.测定输出功率的试验方法High-frequency dielectric heating installations - Test methods for the determination of poweroutput

IEC 61309-1995 家用深油煎锅.性能测量方法Deep-fat fryers for household use - Methods for measuring the performance27P;A4

IEC 61310-1-1995机械安全.指示、标志和活动.第1部分:可视、可听和可触摸

信号要求

Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual,auditory and tactile signals61P;A4

IEC 61310-2-1995 机械安全.指示、标志和活动.第2部分:标志要求Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking29P;A4

（281） 351

IEC标准目录


开本页数

IEC 61310-3-1999机械安全.指示、标志和活动.第3部分:测听者操作和定位要

求

Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the locationand operation of actuators25P;A4

IEC 61311-1995辐射防护装置.液体流出物或表面水体中β及γ辐射放射性核

素连续控制设备

Radiation protection instrumentation - Equipment for continuously monitoring beta and gammaemitting radionuclides in liquid effluents or in surface waters37P;A4

IEC 61312-1-1995 雷电电磁脉冲防护.第1部分:总则Protection against lightning electromagnetic impulse - Part 1: General principles81P;A4

IEC 61314-1-1-1996 光纤输出端数.第1部分:空白详细规范.第1节:第1、2、3、5和99类环境

Fibre optic fan-outs - Part 1-1: Blank detail specification - Environmental categories 1, 2, 3, 5 and99

IEC 61314-1-1995 纤维光学扇形输出器.第1部分:总规范Fibre optic fan-outs - Part 1: Generic specification41P;A4

IEC 61315-1995 光纤功率仪校正Calibration of fibre optic power meters122P;A4

IEC 61316-1999 工业电缆卷筒Industrial cable reels55P;A4

IEC 61319-1-1995 卫星接收设备的互连.第1部分:欧洲Interconnections of satellite receiving equipment - Part 1: Europe45P;A4

IEC 61319-2-1997 卫星接收设备的互连.第2部分:日本Interconnections of satellite receiving equipment - Part 2: Japan17P;A4

IEC 61322-1994辐射保护仪器.中子辐射能量到15MeV的可安装的剂量当量

率计,报警装置和监视器

Radiation protection instrumentation - Installed dose equivalent rate meters, warning assembliesand monitors for neutron radiation of energy from thermal to 15 MeV79P;A4

IEC 61323-1995辐射保护仪器.中子辐射.直接用个人剂量评定和/或剂量评

定率监视器

Radiation protection instrumentation - Neutron radiation - Direct reading personal doseequivalent and/or dose equivalent rate monitors67P;A4

IEC 61325-1995标称电压高于1000V以上高架线的绝缘.直流装置陶瓷或玻

璃绝缘件.定义,试验方法和验收规则

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulatorunits for d.c. systems - Definitons, test methods and acceptance criteria91P;A4

IEC 61326-1 AMD 1-1998测量、控制和实验室用电气设备.电磁兼容性要求.第1部分:一般要求.第1次修订

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1:General requirements; Amendment 1

IEC 61326-1 Edition 1.1-1998 测量、控制和实验室用电气设备.电磁兼容性要求.EMC要

求

Electrical equipment for measurement, control and laboratory use - EMC requirements37P;A4

IEC 61326-1-1998 测量,控制和实验室用电气设备.电磁兼容性要求Electrical equipment for measurement, control and laboratory use - EMC requirements37P;A4

IEC 61326-2002 测量、控制和实验室用电气设备.电磁兼容性要求Electrical equipment for measurement, control and laboratory use - EMC requirements79P;A4

IEC 61327-199512,65mm(0.5 in)磁带用数字扫描混合成的盒式录象系

统.D-3接口

Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetictape - Format D-3269P;A4

（282） 351

IEC标准目录


开本页数

IEC 61329-1995声发生设备.发声器的规定性能和测量方法(发声用电解传

感器)

Sound system equipment - Methods of measuring and specifying the performance of sounders(electroacoustic transducers for tone production)37P;A4

IEC 61330-1995 预制的高压/低压变电所High-voltage/low-voltage prefabricated substations91P;A4

IEC 61331-1-1994医用诊断X射线辐射防护器具.第1部分:材料衰减性能的测

定

Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuationproperties of materials27P;A4

IEC 61331-2-1994 医用诊断X射线辐射防护器具.第2部分:防护玻璃板Protective devices against diagnostic medical X-radiation - Part 2: Protective glass plates23P;A4

IEC 61331-3-1998X射线医疗诊断保护装置.第3部分:性腺防护装置和防护服

装

Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing andprotective devices for gonads21P;A4

IEC 61332-1995 软铁酸盐材料分类Soft ferrite material classification13P;A4

IEC 61333-1996 U和E铁氧体磁心的标记Marking on U and E ferrite cores11P;A4

IEC 61334-3-1-1998配电线路载体系统的配电自动化.第3-1部分:电力线信号要

求.频带和输出等级

Distribution automation using distribution line carrier systems - Part 3-1: Mains signallingrequirements - Frequency bands and output levels27P;A4

IEC 61334-3-21-1996配电线路载体系统的配电自动化.第3部分:电力线信号要求.第21节:MV 两线之间的专用的电容耦合装置

Distribution automation using distribution line carrier systems - Part 3: Mains signallingrequirements - Section 21: MV phase-to-phase isolated capacitive coupling device33P;A4

IEC 61334-3-22-2001采用配电线载波系统的配电自动化.第3-22部分:主要干线

信号传输要求.中压(MV)相-地和网屏-地的插入式耦合装置

Distribution automation using distribution line carrier systems - Part 3-22: Mains signallingrequirements; MV phase-to-earth and screen-to-earth intrusive coupling devices35P;A4

IEC 61334-4-1-1996使用配线载波系统的自动分布操作.第4部分:数据通信协议.第1节:通信系统的参考模型

Distribution automation using distribution line carrier systems - Part 4: Data communicationprotocols - Section 1: Reference model of the communication system43P;A4

IEC 61334-4-32-1996使用配线载波系统的自动分布操作.第4部分:数据通信协议.第32节:数据链层.逻辑链结控制(LLC)

Distribution automation using distribution line carrier systems - Part 4: Data communicationprotocols - Section 32: Data link layer - Logical link control (LLC)69P;A4

IEC 61334-4-33-1998配电线路载体系统的配电自动化. 第4-33部分:数据通信协

议.数据链接层.连接定向协议

Distribution automation using distribution line carrier systems - Part 4-33: Data communicationprotocols - Data link layer - Connection oriented protocol51P;A4

IEC 61334-4-41-1996使用配线载波系统的自动分布操作.第4部分:数据通信协议.第4节:应用协议.配线信息规范

Distribution automation using distribution line carrier systems - Part 4: Data communicationprotocols - Section 41: Application protocols - Distribution line message specification247P;A4

（283） 351

IEC标准目录


开本页数

IEC 61334-4-42-1996使用配线载波系统的自动分布操作.第4部分:数据通信协议.第42节:应用协议.应用层

Distribution automation using distribution line carrier systems - Part 4: Data communicationprotocols - Section 42: Application protocols - Application layer89P;A4


议.系统管理.CIASE协议

Distribution automation using distribution line carrier systems - Part 4-511: Data communicationprotocols; Systems management; CIASE protocol65P;A4


议.61334-5-1协议系统管理.管理信息基础

Distribution automation using distribution line carrier systems - Part 4-512: Data communicationprotocols; System management using profile 61334-5-1; Management Information Base (MIB)47P;A4


议.网络层.非连接协议

Distribution automation using distribution line carrier systems - Part 4-61: Data communicationprotocols - Network layer - Connectionless protocol63P;A4

IEC 61334-5-1-2001采用配电线载波系统的配电自动化. 第5-1部分:低层文件

集.扩展型频移键控(S-FSK)文件集

Distribution automation using distribution line carrier systems - Part 5-1: Lower layer profiles; Thespread frequency shift keying (S-FSK) profile123P;A4

IEC 61334-6-2000 配电线路载波系统的配电自动化.第6部分:A-XDR编码规则Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule75P;A4

IEC 61335-1997 核仪器.X射线荧光分析法用钻孔设备Nuclear instrumentation - Bore-hole apparatus for X-ray fluorescence analysis19P;A4

IEC 61336-1996核仪器装置.利用电离辐射的厚度测量系统的定义和试验方

法

Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation -Definitions and test methods79P;A4

IEC 61337-1-1-1995使用波导型介质谐振器的滤波器.第1部分:总论、标准值和

试验条件.第1节:总论和标准值

Filters using waveguide type dielectric resonators - Part 1: General information, standard valuesand test conditions - Section 1: General information and standard values21P;A4

IEC 61337-1-2-1999 使用波导型介质谐振器的滤波器.第1-2部分:试验条件Filters using waveguide type dielectric resonators - Part 1-2: Test conditions27P;A4

IEC 61338-1-1-1996 波导型介质谐振器.第1部分:总论和试验条件.第1节:总论Waveguide type dielectric resonators - Part 1: General information and test conditions - Section1: General information25P;A4

IEC 61338-1-2-1998 波导型介质谐振器.第1-2部分:总论和试验条件.试验条件Waveguide type dielectric resonators - Part 1-2: General information and test conditions - Testconditions33P;A4

IEC 61338-1-3-1999波导型介质谐振器.第1-3部分:通用信息和试验条件.微波频

段的介质谐振器材料的复合相对电容率测量方法

Waveguide type dielectric resonators - Part 1-3: General information and test conditions -Measurement method of complex relative permittivity for dielectric resonator materials atmicrowave frequency47P;A4

IEC 61340-2-1-2002静电学.第2-1部分:材料和产品损耗静电荷的能力的测量方

法

Electrostatics - Part 2-1: Measurement methods; Ability of materials and products to dissipatestatic electric charge35P;A4

（284） 351

IEC标准目录


开本页数

IEC 61340-2-3-2000静电学.第2-3部分:用于避免静电放电积累的固体二维材料

的电阻和电阻率测定的试验方法

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solidplanar materials used to avoid electrostatic charge accumulation41P;A4

IEC 61340-3-1-2002静电学.第3-1部分:静电效果的模拟方法.人体模型.元部件

测试

Electrostatics - Part 3-1: Methods for simulation of electrostatic effects; Human body model(HBM); Component testing19P;A4

IEC 61340-3-2-2002静电学.第3-2部分:静电效果的模拟方法.机械模型.元部件

测试

Electrostatics - Part 3-2: Methods for simulation of electrostatic effects; Machine model (MM);Component testing17P;A4

IEC 61340-4-1-1995静电学.第4部分:基本应用的标准试验方法.第1节:地板覆盖

物和装修地板的静电特性

Electrostatics - Part 4: Standard test methods for specific applications - Section 1: Electrostaticbehaviour of floor coverings and installed floors29P;A4

IEC 61340-4-3-2001 静电.第4-3部分:对于专门用途的标准试验方法.鞋靴Electrostatics - Part 4-3: Standard test methods for specific applications; Footwear15P;A4

IEC 61341-1994 反光灯的中心波束强度及波束张角的测量方法Method of measurement of centre beam intensity and beam angle(s) of reflector lamps15P;A4

IEC 61342-1995 核仪器.多脉冲幅度分析仪.主要特性,技术要求和试验方法Nuclear instrumentation - Multichannel pulse height analyzers - Main characteristics, technicalrequirements and test methods105P;A4

IEC 61343-1996核反应堆装置.沸水反应堆(BWR).核心内部适度冷却监测

用反应釜的测量

Nuclear reactor instrumentation - Boiling light water reactors (BWR) - Measurements in thereactor vessel for monitoring adequate cooling within the core50P;A4

IEC 61344-1996 辐射防护装置.监测设备.X和γ射线的个人警告装置Radiation protection instrumentation - Monitoring equipment - Personal warning devices for Xand gamma radiations45P;A4

IEC 61345-1998 光电模块用UV试验UV test for photovoltaic (PV) modules11P;A4

IEC 61346-2-2000工业系统、装置、设备和工业产品.结构规则和参考命名.第2部分:物品分类和分级编码

Industrial systems, installations and equipment and industrial products - Structuring principlesand reference designations - Part 2: Classification of objects and codes for classes45P;A4

IEC 61347-1-2000 灯控制装置.第1部分:总则和安全要求Lamp controlgear - Part 1: General and safety requirements117P;A4

IEC 61347-2-10-2000灯控制开关.第2-10部分:冷启动管灯放电(氖管)的高频操作

用电子反向器和转化器的特殊要求

Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors forhigh-frequency operation of cold start tubular discharge lamps (neon tubes)43P;A4

IEC 61347-2-11-2001 灯控制开关.第2-11部分:用照明设备的多种电路特殊要求Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits usedwith luminaires15P;A4

IEC 61347-2-1-2000 灯控制装置.第2-1部分:起动装置的特殊要求(不包括辉光起

动器)

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glowstarters)

（285） 351

IEC标准目录


开本页数

IEC 61347-2-2-2000灯控制装置.第2-2部分:荧光灯用直流或交流电子低电压转

换器的特殊要求

Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-downconvertors for filament lamps69P;A4

IEC 61347-2-3-2000灯控制装置.第2-3部分:荧光灯用交流电子镇流器的特殊要

求

Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts forfluorescent lamps39P;A4

IEC 61347-2-4-2000灯控制装置.第2-4部分:一般照明用直流电子镇流器的特殊

要求

Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts forgeneral lighting21P;A4

IEC 61347-2-5-2000灯控制装置.第2-5部分:公交照明用直流电子镇流器的特殊

要求

Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for publictransport lighting27P;A4

IEC 61347-2-6-2000灯控制装置.第2-6部分:飞行器照明用直流电子镇流器的特

殊要求

Lamp controlgear - Part 2-6: Particular requirements for d.c. supplied electronic ballasts foraircraft lighting27P;A4

IEC 61347-2-7-2000灯控制装置.第2-7部分:应急照明用直流电子镇流器的特殊

要求

Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts foremergency lighting41P;A4

IEC 61347-2-8-2000 灯控制开关.第2-8部分:荧光灯镇流器的特殊要求Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps39P;A4

IEC 61347-2-9-2000灯控制开关.第2-9部分:放电灯(荧光灯除外)镇流器的特殊

要求

Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excludingfluorescent lamps)41P;A4

IEC 61355-1997 种植系统和设备文献工作的分类及名称与符号Classification and designation of documents for plants, systems and equipment101P;A4

IEC 61358-1996瓦时用直接连接的交流电流静态瓦时表(1和2类)的验收检

验

Acceptance inspection for direct connected alternating current static watt-hour meters for activeenergy (classes 1 and 2)58P;A4

IEC 61360-1-2002带电气元件相关分类表的标准数据元类型.第1部分:定义、

原则和方法

Standard data element types with associated classification scheme for electric components - Part1: Definitions; Principles and methods54P;A4

IEC 61360-2-2002电气元器件标准数据元素类型和相关分类模式.第2部分:EXPRESS词典模式

Standard data element types with associated classification scheme for electric components - Part2: EXPRESS dictionary schema86P;A4

IEC 61360-4-1997与电子元件相关标准数据元类型.第4部分:标准数据元类型,成分,等级和术语的IEC参考文献汇编

Standard data element types with associated classification scheme for electric components - Part4: IEC reference collection of standard data element types, component classes and terms236P;A4

IEC 61362-1998 液压涡轮机控制系统的规范指南Guide to specification of hydraulic turbine control systems105P;A4

（286） 351

IEC标准目录


开本页数

IEC 61363-1-1998造船及活动式和固定式近海建筑用电气设备.第1部分:计算

三相交流电短路电流的步骤

Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures forcalculating short-circuit currents in three-phase a.c.81P;A4

IEC 61373-1999 铁路设备.滚动车辆设备.冲击和振动试验 Railway applications - Rolling stock equipment - Shock and vibration tests

IEC 61375-1-1999 电力铁道设备.列车总线.第1部分:列车通信网络 Electric railway equipment - Train bus - Part 1: Train Communication Network

IEC 61377-1996电力牵引.铁路车辆.反向供电交流电动机及其控制的联合

检验

Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors andtheir control45P;A4

IEC 61377-2-2002铁路设施.机车车辆.联合试验.第2部分:反向直流牵引电动

机及其控制设备

Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct currenttraction motors and their control47P;A4

IEC 61377-3-2002铁路设施.铁路车辆.第3部分:交流电动机,间接变流器及其

他控制系统的联合检验

Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fedby an indirect convertor, and their control system47P;A4

IEC 61378-1-1997 转换变压器.第1部分:工业用变压器Convertor transformers - Part 1: Transformers for industrial applications57P;A4

IEC 61378-2-2001 转换变压器.第2部分:HVDC用变压器Convertor transformers - Part 2: Transformers for HVDC applications45P;A4

IEC 61386-1 AMD 1-2000 电气装置用导管系统.第1部分:一般要求.修改件1Conduit systems for electrical installations - Part 1: General requirements; Amendment 125P;A4

IEC 61386-1-1996 电气装置用导管系统.第1部分:一般要求Conduit systems for electrical installations - Part 1: General requirements67P;A4

IEC 61386-21-2002 电缆管理用导管系统.第21部分:特殊要求:刚性导管系统Conduit systems for cable management - Part 21: Particular requirements; Rigid conduit systems29P;A4

IEC 61386-22-2002 电缆管理用导管系统.第22部分:特殊要求:可弯曲的导管系

统

Conduit systems for cable management - Part 22: Particular requirements; Pliable conduitsystems

IEC 61386-23-2002 电缆管理用导管系统.第23部分:特殊要求:挠性导管系统Conduit systems for cable management - Part 23: Particular requirements; Flexible conduitsystems

IEC 61395-1998 架空线.绞线的蠕变试验程序Overhead electrical conductors - Creep test procedures for stranded conductors21P;A4

IEC 61400-11-2002 风轮发电机系统.第11部分:噪音测量技术Wind turbine generator systems - Part 11: Acoustic noise measurement techniques43P;A4

IEC 61400-1-1999 风涡轮发电机组.第1部分:安全要求Wind turbine generator systems - Part 1: Safety requirements57P;A4

IEC 61400-12-1998 风涡轮发电机组.第12部分:风涡轮机动力特性试验Wind turbine generator systems - Part 12: Wind turbine power performance testing44P;A4

IEC 61400-21-2001风轮发电机系统.第21部分:网格连接风轮的动力质量特性

的测量和评定

Wind turbine generator systems - Part 21: Measurement and assessment of power qualitycharacteristics of grid connected wind turbines85P;A4

（287） 351

IEC标准目录


开本页数

IEC 61400-2-1996 风涡轮发电机组.第2部分:小型风涡轮发电机的安全Wind turbine generator systems - Part 2: Safety of small wind turbines51P;A4

IEC 61427-1999 太阳光伏能系统用蓄电池和蓄电池组.一般要求和试验方法Secondary cells and batteries for solar photovoltaic energy systems - General requirements andmethods of test25P;A4

IEC 61428-1998 核检测仪器.使用Ge探测装置的γ射线光谱测定法用样品容 Nuclear instrumentation - Sample containers for gamma-ray spectrometry with Ge-detectors

IEC 61429-1995 与国际循环符号ISO 7000-1135一致的蓄电池的标记Marking of secondary cells and batteries with the international recycling symbol ISO 7000-113515P;A4

IEC 61434-1996含碱性或其他非酸性电解质的二次充电电池和电池组.碱性

二次充电电池和电池组标准电流的命名指南

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to thedesignation of current in alkaline secondary cell and battery standards7P;A4

IEC 61435-1996 核装置.放射探测器用高纯度锗晶体Nuclear instrumentation - High-purity germanium crystals for radiation detectors56P;A4

IEC 61436-1998含有碱或者其它非酸性电解液的二次电池组和蓄电池组.密封式镍金属氢化物可再充电单电池组

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride rechargeable single cells25P;A4

IEC 61440-1997含有碱性或其它非酸性电解质的次级电池和蓄电池.密封的

镍镉小型可再充电柱形单电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium small prismatic rechargeable single cells25P;A4

IEC 61442-1997电缆.额定电压从6kV(U)到30kV(U)(包括30kV)的电力电缆

用组件的试验方法

Electric cables - Test methods for accessories for power cables with rated voltages from 6 kV(U=7,2 kV) up to 30 kV (U=36 kV)55P;A4

IEC 61443-1999 额定电压大于30KV(U)的电力电缆的短路温度极限值Short-circuit temperature limits of electric cables with rated voltages above 30 kV (U = 36 kV)17P;A4

IEC 61452-1995核仪器装置.放射性核素X射线发射率的测量.锗分光仪的应

用和校验

Nuclear instrumentation - Measurement of gamma-ray emission rates of radionuclides -Calibration and use of germanium spectrometers187P;A4

IEC 61453-1997核仪器.放射性核素分析用铊活性碘化钠探测系统.校正和

使用方法

Nuclear instrumentation - Thallium activated sodium iodide detector systems for assay ofradionuclides - Calibration and usage31P;A4

IEC 61455-1995 核仪器.核光谱MCA直方图数据交换格式Nuclear instrumentation - MCA histogram data interchange format for nuclear spectroscopy31P;A4

IEC 61466-1-1997额定电压超过1000V的架空线用复合绝缘子串组合件.第1部分:标准强度等级和端接头

Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V -Part 1: Standard strength classes and end fittings43P;A4

IEC 61466-2 AMD 1-2002额定电压1000V以上的架空线路用复合绝缘子串单元.第2部分:尺寸和电气特性.修改件1

Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V -Part 2: Dimensional and electrical characteristics; Amendment 15P;A4

（288） 351

IEC标准目录


开本页数

IEC 61466-2 Edition 1.1-2002额定电压超过1000V的架空线用复合绝缘子串组合件.第2部分:尺寸和电特性

Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V -Part 2: Dimensional and electrical characteristics13P;A4

IEC 61466-2-1998额定电压1000V以上的架空线路用复合绝缘子串单元.第2部分:尺寸和电气特性

Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V -Part 2: Dimensional and electrical characteristics13P;A4

IEC 61468-2000核电厂站.堆芯测试设备.自动力的中子探测器的特性和试

验方法

Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors57P;A4

IEC 61472-1998 带电作业. 小接近距离.计算方法Live working - Minimum approach distances - Method of calculation69P;A4

IEC 61477 AMD 1-2002 带电作业.工具,器械和设备使用的低要求.修改件1Live working - Minimum requirements for the utilization of tools, devices and equipment;Amendment 1

IEC 61477 Edition 1.1-2002 带电作业.工具,器械和设备使用的低要求Live working - Minimum requirements for the utilization of tools, devices and equipment23P;A4

IEC 61477-2001 带电作业.工具、装置和设备利用的低要求Live working - Minimum requirements for the utilization of tools, devices and equipment23P;A4

IEC 61478 AMD 1-2003 带电作业.绝缘材料做成的梯子.修改件1Live working - Ladders of insulating material; Amendment 14P;A4

IEC 61478-2001 带电作业.绝缘材料作成的梯子Live working - Ladders of insulating material67P;A4

IEC 61479 AMD 1-2002 带电作业.绝缘材料制的软导体套(线性软管).修改1Live working - Flexible conductor covers (line hoses) of insulating material; Amendment 13P;A4

IEC 61479 Edition 1.1-2002 带电作业.绝缘材料制的软导体套(线性软管)Live working - Flexible conductor covers (line hoses) of insulating material75P;A4

IEC 61479-2001 带电作业.绝缘材料的柔性导体封盖物Live working - Flexible conductor covers (line hoses) of insulating material75P;A4

IEC 61481 AMD 1-2002 带电作业.1kV至36kV交流电压用轻便相位精密度测量器.修改件1

Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.;Amendment 1

IEC 61481 Edition 1.1-2002 带电作业.1kV至36kV交流电压用轻便相位精密度测量器Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.103P;A4

IEC 61481-2001 带电作业.1kV至36kV交流电压用小型相位比较器Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.103P;A4

IEC 61482-1-2002带电作业.工人热防护服装用阻燃材料.电弧热危害.第1部分:试验方法

Live working - Flame-resistant materials for clothing for thermal protection of workers; Thermalhazards of an electric arc - Part 1: Test methods73P;A4

IEC 61491-2002 工业机械的电气设备.控制和传动间实时通信用串行数据链Electrical equipment of industrial machines - Serial data link for real-time communicationbetween controls and drives

IEC 61496-1-1997 机械安全.电敏防护设备.第1部分:一般要求和试验Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements andtests

（289） 351

IEC标准目录


开本页数

IEC 61496-2-1997机械安全.电敏防护设备.第2部分:活动的电子视力保护设备

的特殊要求

Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements forequipment using active opto-electronic protective devices (AOPDs)61P;A4

IEC 61496-3-2001机械安全.电敏防护设备.第3部分:对漫反射敏感的有源光电

子保护器件的特殊要求

Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements forActive Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)111P;A4

IEC 61497-1998核电站.重要的安全功能用电器连锁装置.设计和实现的推

荐规范

Nuclear power plants - Electrical interlocks for functions important to safety - Recommendationsfor design and implementation37P;A4

IEC 61500-1996核电站.安全控制系统及装置.多道传递的数据传送的功能

要求

Nuclear power plants - Instrumentation and control systems important to safety - Functionalrequirements for multiplexed data transmission41P;A4

IEC 61501-1998核反应堆仪器仪表.宽范围中子通量比率仪.主要平方电压

法

Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltagemethod79P;A4

IEC 61502-1999 核电厂.加压水冷反应堆.内部结构振动监测Nuclear power plants - Pressurized water reactors - Vibration monitoring of internal structures83P;A4

IEC 61504-2000核电厂.对于安全性很重要的测量和控制系统.整个工厂范

围的辐射监测

Nuclear power plants - Instrumentation and control systems important to safety - Plant-wideradiation monitoring49P;A4

IEC 61505-1998 核反应堆装置.沸水反应堆(BWR).稳定性监测Nuclear reactor instrumentation - Boiling water reactors (BWR) - Stability monitoring83P;A4

IEC 61506-1997 工业过程测量和控制.应用软件的文献工作Industrial-process measurement and control - Documentation of application software119P;A4

IEC 61508-1-1998电气/电子/可编程序的电子安全相关系统的功能安全.第1部分:一般要求

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1:General requirements115P;A4

IEC 61508-2-2000电/电子/可编程序的电子安全相关系统的功能安全.第2部分:电/电子/可编程序的电子安全相关系统的要求

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2:Requirements for electrical/electronic/programmable electronic safety-related systems143P;A4

IEC 61508-3-1998电/电子/可编程序的电子安全相关系统的功能安全.第3部分:软件要求

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3:Software requirements95P;A4

IEC 61508-4-1998电/电子/可编程序的电子安全相关系统的功能安全.第4部分:定义和缩写

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4:Definitions and abbreviations53P;A4

IEC 61508-5-1998电/电子/可编程序的电子安全相关系统的功能安全.第5部分:安全完善等级测定方法的实例

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5:Examples of methods for the determination of safety integrity levels57P;A4

（290） 351

IEC标准目录


开本页数

IEC 61508-6-2000电/电子/可编程序的电子安全相关系统的功能安全.第6部分:IEC 61508-2和IEC 61508-3的应用指南

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6:Guidelines on the application of IEC 61508-2 and IEC 61508-3145P;A4

IEC 61508-7-2000电/电子/可编程序的电子安全相关系统的功能安全.第7部分:技术和测量综述

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7:Overview of techniques and measures229P;A4

IEC 61511-1-2003功能安全.加工工业部门的安全仪表化系统.第1部分:框架、

定义、系统、硬件和软件要求

Functional safety - Safety instrumented systems for the process industry sector - Part 1:Framework, definitions, system, hardware and software requirements90P;A4

IEC 61512-1-1997 分批控制.第1部分:模型和术语Batch control - Part 1: Models and terminology177P;A4

IEC 61512-2-2001 分批控制.第2部分:数据结构和语言导则Batch control - Part 2: Data structures and guidelines for languages205P;A4

IEC 61513-2001核电厂.以安全为主的系统用仪器仪表和控制.系统的一般

要求

Nuclear power plant - Instrumentation and control for systems important to safety; Generalrequirements for systems189P;A4

IEC 61514-2000 工业过程控制系统.气动输出阀门定位器性能评价的方法Industrial-process control systems - Methods of evaluating the performance of valve positionerswith pneumatic outputs83P;A4

IEC 61515-1995 矿物绝缘电缆和热电偶Mineral insulated thermocouple cables and thermocouples25P;A4

IEC 61518-2001差压测量设备和不足413bar的带法兰的关闭装置间的配合

尺寸

Mating dimensions between differential pressure (type) measuring instruments and flanged-onshut-off devices up to 413 bar (41,3 MPa)13P;A4

IEC 61520-2000 温度计传感器用金属温度计套管.功能尺寸Metal thermowells for thermometer sensors - Functional dimensions29P;A4

IEC 61523-1-2001 延迟计算和功率计算标准.第1部分:集成电路延迟计算和功

率计算系统

Delay and power calculation standards - Part 1: Integrated circuit delay and power calculationsystems

IEC 61523-2-2002延迟计算和功率计算标准.第2部分:互补金属氧化物半导体

(CMOS)专用集成电路(ASIC)程序库用配套延迟计算规范

Delay and power calculation standards - Part 2: Pre-layout delay calculation specification forCMOS ASIC libraries38P;A4

IEC 61525-1996辐射防护测试设备.X、γ、高能β和中子辐射.直读式个人剂

量当量和/或剂量当量等级检测器

Radiation protection instrumentation - X, gamma, high energy beta and neutron radiations -Direct reading personal dose equivalent and/or dose equivalent rate monitors71P;A4

IEC 61526-1998辐射防护装置.x射线.伽玛射线和贝塔射线辐射个人剂量等

效H(10)和H(0,07).直接读数个人剂量等效力和/或剂量等效

比率剂量计

Radiation protection instrumentation - Measurement of personal dose equivalents H(10) andH(0,07) for X, gamma and beta radiations - Direct reading personal dose equivalent and/or doseequivalent rate dosemeters67P;A4

IEC 61537-2001 电缆管理用电缆盘系统和电缆梯系统Cable tray systems and cable ladder systems for cable management121P;A4

（291） 351

IEC标准目录


开本页数

IEC 61540 Edition 1.1-1999电气附件.家用和类似用途(PRCDS)无集成过电流保护的便

携式测残余电流的装置

Electrical accessories - Portable residual current devices without integral overcurrent protectionfor household and similar use (PRCDs)223P;A4

IEC 61540-1999电器附件.家用及类似用非综合过电流保护的便携式残余电

流设备

Electrical accessories - Portable residual current devices without integral overcurrent protectionfor household and similar use (PRCDs)223P;A4

IEC 61543-1995 家用和类似用剩余电流控制装置.电磁兼容性Residual current-operated protective devices (RCDs) for household and similar use -Electromagnetic compatibility19P;A4

IEC 61545-1996连接装置.任何材料的夹紧件用铝线的连接装置及铝基夹紧

件用铜线的连接装置

Connecting devices - Devices for the connection of aluminium conductors in clamping units ofany material and copper conductors in aluminium bodied clamping units77P;A4

IEC 61547 AMD 1-2000 一般照明用设备.电磁兼容性抗扰性要求.修改件1 Equipment for general lighting purposes - EMC immunity requirements; Amendment 1

IEC 61547-1995 通用照明设备.电磁兼容抗扰性要求Equipment for general lighting purposes - EMC immunity requirements23P;A4

IEC 61549 AMD 1-1997 各种灯.修改件1Miscellaneous lamps; Amendment 112P;A4

IEC 61549 AMD 2-1999 混杂灯.补充件2 Miscellaneous lamps; Amendment 2

IEC 61549 Edition 1.2-1999 混杂的灯具Miscellaneous lamps26P;A4

IEC 61549-1996 多功能灯Miscellaneous lamps10P;A4

IEC 61554-1999 仪表板上设备.电子测量仪器.板上装配尺寸Panel mounted equipment - Electrical measuring instruments - Dimensions for panel mounting19P;A4

IEC 61557-10-20001000V交流和1500V直流的低压分配系统的电气安全.防护

测量的试验、测量和监测设备.第10部分:试验测量或防护

手段检测的复合测量设备

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures - Part 10: Combinedmeasuring equipment for testing, measuring or monitoring of protective measures11P;A4


测量的试验、测量和监测设备.第1部分:一般要求

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring and monitoring of protective measures - Part 1: Generalrequirements


测量的试验、测量和监测设备.第2部分:绝缘电阻

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring and monitoring of protective measures - Part 2: Insulationresistance


测量的试验、测量和监测设备.第3部分:回线阻抗

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance15P;A4

（292） 351

IEC标准目录


开本页数


测量的试验、测量和监测设备.第4部分:地面连接和等电位

连接的电阻

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance ofearth connection and equipotential bonding13P;A4


测量的试验、测量和监测设备.第5部分:地面阻力

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring and monitoring of protective measures - Part 5: Resistance toearth


测量的试验、测量和监测设备.第6部分:TT和TN系统中的

剩余电流设备

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual currentdevices (RCD) in TT and TN systems17P;A4


测量的试验、测量和监测设备.第7部分:相序

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence15P;A4


测量的试验、测量和监测设备.第8部分:IT系统中的绝缘监

测设备

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulationmonitoring devices for IT systems21P;A4

IEC 61557-9-1999不大于1000V交流和1500V直流的低压配电系统的电气安

全.防护测量的试验、测量和监测设备.第9部分:IT系统中的

绝缘失效定位设备

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. -Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment forinsulation fault location in IT systems23P;A4

IEC 61558-1 Edition 1.1-1998电力变压器、供电设备及类似设备的安全.第1部分:一般要

求和试验.第1次修订

Safety of power transformers, power supply units and similar - Part 1: General requirements andtests

IEC 61558-1-1998 电力变压器,供电设备及类似设备的安全.第1部分:一般要求

和试验

Safety of power transformers, power supply units and similar - Part 1: General requirements andtests

IEC 61558-2-1-1997电力变压器、供电设备及类似设备的安全.第2部分:一般用

途分离变压器的特殊要求

Safety of power transformers, power supply units and similar - Part 2: Particular requirements forseparating transformers for general use17P;A4

IEC 61558-2-12-2001电力变压器、电源装置及类似设备的安全.第2-12部分:恒压变压器的特殊要求

Safety of power transformers, power supply units and similar devices - Part 2-12: Particularrequirements for constant voltage transformers37P;A4

IEC 61558-2-13-1999电力变压器、供电设备及类似设备的安全.第2-13部分:通用自耦变压器的特殊要求

Safety of power transformers, power supply units and similar devices - Part 2-13: Particularrequirements for auto-transformers for general use25P;A4

IEC 61558-2-15-1999电力变压器、供电设备及类似设备的安全.第2-15部分:医学区域供电用隔离变压器的特殊要求

Safety of power transformers, power supply units and similar - Part 2-15: Particular requirementsfor isolating transformers for the supply of medical locations31P;A4

（293） 351

IEC标准目录


开本页数

IEC 61558-2-17-1997电力变压器、供电设备及类似设备的安全.第2部分:开关模

式供电系统用变压器的特殊要求

Safety of power transformers, power supply units and similar - Part 2: Particular requirements fortransformers for switch mode power supplies25P;A4

IEC 61558-2-19-2000电力变压器、供电设备及类似设备的安全.第2-19部分:扰动衰减变压器的特殊要求

Safety of power transformers, power supply units and similar devices - Part 2-19: Particularrequirements for perturbation attenuation transformers29P;A4

IEC 61558-2-20-2000电力变压器、供电设备及类似设备的安全.第2-20部分:小型感应器的特殊要求

Safety of power transformers, power supply units and similar devices - Part 2-20: Particularrequirements for small reactors31P;A4

IEC 61558-2-2-1997电力变压器、供电设备及类似设备的安全.第2-2部分:控制

变压器的特殊要求

Safety of power transformers, power supply units and similar - Part 2-2: Particular requirementsfor control transformers19P;A4

IEC 61558-2-23-2000电力变压器、供电设备及类似设备的安全.第2-23部分:工地变压器的特殊要求

Safety of power transformers, power supply units and similar devices - Part 2-23: Particularrequirements for transformers for construction sites37P;A4

IEC 61558-2-3-1999电力变压器、供电设备及类似设备的安全.第2-3部分:燃气

及燃油燃烧器用点火变压器的特殊要求

Safety of power transformers, power supply units and similar devices - Part 2-3: Particularrequirements for ignition transformers for gas and oil burners29P;A4


途隔离变压器的特殊要求

Safety of power transformers, power supply units and similar - Part 2: Particular requirements forisolating transformers for general use21P;A4

IEC 61558-2-5-1997电力变压器、供电设备及类似设备的安全.第2-5部分:电动

剃须刀变压器和电动剃刀供电装置的特殊要求

Safety of power transformers, power supply units and similar - Part 2-5: Particular requirementsfor shaver transformers and shaver supply units25P;A4


途安全隔离变压器的特殊要求

Safety of power transformers, power supply units and similar - Part 2: Particular requirements forsafety isolating transformers for general use21P;A4

IEC 61558-2-7-1997电力变压器、供电设备及类似设备的安全.第2部分:玩具用

变压器的特殊要求

Safety of power transformers, power supply units and similar - Part 2: Particular requirements fortransformers for toys27P;A4

IEC 61558-2-8-1998电力变压器、供电设备及类似设备的安全.第2-8部分:铃声

和钟声变压器的特殊要求

Safety of small power transformers, power supply units and similar - Part 2-8: Particularrequirements for bell and chime transformers27P;A4

IEC 61558-2-9-2002电力变压器、供电设备及类似设备的安全.第2-9部分:Ⅲ类

手用钨丝灯的压变压器的特殊要求

Safety of power transformers, power supply units and similar products - Part 2-9: Particularrequirements for transformers for class III handlamps for tungsten filament lamps27P;A4

IEC 61559-1996核反应堆中的辐射.连续监测辐射和/或放射性能等级中心

系统

Radiation in nuclear facilities - Centralized system for continuous monitoring of radiation and/orlevels of radioactivity53P;A4

（294） 351

IEC标准目录


开本页数

IEC 61559-2-2002核设施中的辐射.连续监测辐射和/或放射性水平的中心系

统.第2部分:对卸料,环境,意外事件或紧急事故监测功能的

要求

Radiation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/orlevels of radioactivity - Part 2: Requirements for discharge, environmental, accident, or post-accident monitoring functions27P;A4

IEC 61560-1998 辐射防护装置.毛皮和其它织物样品的无害辐射试验用装置Radiation protection instrumentation - Apparatus for non-destructive radiation tests of fur andother cloth samples41P;A4

IEC 61562-2001辐射防护仪器.测量食品中β辐射放射性核素具体放射性用

便携式设备

Radiation protection instrumentation - Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs45P;A4

IEC 61563-2001辐射防护仪器仪表.食品中γ辐射放射性核素的放射性比度

测量设备

Radiation protection instrumentation - Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs45P;A4

IEC 61566-1997 射频电磁场辐照测量.频率在100kHz和1GHz间的场强Measurement of exposure to radio-frequency electromagnetic fields - Field strength in thefrequency range 100 kHz to 1 GHz51P;A4

IEC 61577-1-2000 辐射防护装备.氡和氡降解产品的测量装置.第1部分:一般要

求

Radiation protection instrumentation - Radon and radon decay product measuring instruments -Part 1: General requirements

IEC 61577-2-2000辐射防护仪器仪表.氡和氡降解产品的测量装置.第2部分:氡测量仪的特定要求

Radiation protection instrumentation - Radon and radon decay product measuring instruments -Part 2: Specific requirements for radon measuring instruments39P;A4

IEC 61577-3-2002辐射防护仪表.氡和氡降解产品的测量仪器.第3部分:氡降解

产品的测量仪器的特殊要求

Radiation protection instrumentation - Radon and radon decay product measuring instruments -Part 3: Specific requirements for radon decay product measuring instruments53P;A4

IEC 61578-1997辐射防护装置.α和β气溶胶测量仪用氡补偿效应的校正和检

测

Radiation protection instrumentation - Calibration and verification of the effectiveness of radoncompensation for alpha and/or beta aerosol measuring instruments - Test methods63P;A4

IEC 61580-1-1996 波导测量方法.第1部分:偏振面的退耦和旋转Methods of measurement for waveguides - Part 1: Decoupling and rotation of the plane ofpolarization

IEC 61580-1995 波导和波导装置回程损耗测量Measurement of return loss on waveguide and waveguide assemblies11P;A4

IEC 61580-2-1996 波导测量方法.第2部分:互调电平Methods of measurement for waveguides - Part 2: Level of intermodulation products17P;A4

IEC 61580-3-1997 波导管的测量方法.第3部分:群时延的变化Methods of measurement for waveguides - Part 3: Variation of group delay17P;A4

IEC 61580-4-1997 波导测量方法.第4部分:波导衰减和波导组件Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguideassemblies21P;A4

（295） 351

IEC标准目录


开本页数

IEC 61580-7-1996 波导测量方法.第7部分:图解法测定波导管性能Methods of measurement for waveguides - Part 7: Graphical method for the determination ofwaveguide performance15P;A4

IEC 61580-8-1996 波导测量方法.第8部分:波导功率容量Methods of measurement for waveguides - Part 8: Waveguide power holding capability9P;A4

IEC 61580-9-1996 波导测量方法.第9部分:矩形波导接口处的反射系数Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangularwaveguide interfaces15P;A4

IEC 61584-2001辐射防护仪器仪表.已安装的、便携式或可运输的组件.气体比势动能范围和气体比势动能率的测量

Radiation protection instrumentation - Installed, portable or transportable assemblies -Measurement of air kerma direction and air kerma rate61P;A4

IEC 61587-1-1999电气设备的技术结构.IEC 60917和IEC 60297的试验.第1部分:壁橱,支架,辅助支架和底盘的气候试验,机械试验和安

全方面

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1:Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis41P;A4

IEC 61587-2-2000电子设备的机械结构.IEC 60917和IEC 60297的试验.第2部分:箱、支架的地震荷载试验

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2:Seismic tests for cabinets and racks10P;A4

IEC 61591-1997 家用炉罩.性能测量方法Household range hoods - Methods for measuring performance23P;A4

IEC 61595-1-1997专用多路数字声频磁带记录器(DATR)卷对卷系统.第1部分:格式A

Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part1: Format A55P;A4

IEC 61595-2-1997多路数字式音响磁带记录器(DATR),卷对卷系统.第1部分:格式B

Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part2: Format B53P;A4

IEC 61595-3-1999专用多路数字声频磁带记录器(DATR)卷对卷系统.第3部分:16比特介质的24比特操作

Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part3: 24-bit operation for 16-bit media11P;A4

IEC 61596-1995 电感器和变压器用磁氧化EP芯和相伴部件Magnetic oxide EP-cores and associated parts for use in inductors and transformers -Dimensions

IEC 61599-1999 视盘播放器.测量方法Videodisk players - Methods of measurement55P;A4

IEC 61603-1-1997 使用红外线辐射的声频和/或视频及相关信号的传输.第1部分:总则

Transmission of audio and/or video and related signals using infra-red radiation - Part 1: General49P;A4

IEC 61603-2-1997使用红外线辐射的声频和/或视频及相关信号的传输.第2部分:声宽频带和有关信号用传输系统

Transmission of audio and/or video and related signals using infra-red radiation - Part 2:Transmission systems for audio wide band and related signals35P;A4

IEC 61603-3-1997使用红外线辐射的声频和/或视频及相关信号的传输.第3部分:会议及类似系统的声信号传输设备

Transmission of audio and/or video and related signals using infra-red radiation - Part 3:Transmission systems for audio signals for conference and similar systems27P;A4

（296） 351

IEC标准目录


开本页数

IEC 61603-6-2001使用红外线辐射的声频和/或视频及相关信号的传输.第6部分:视频和视听信号

Transmission of audio and/or video and related signals using infra-red radiation - Part 6: Videoand audio-visual signals15P;A4

IEC 61605-1996 电子和通信设备中用固定导线的标记代码Fixed inductors for use in electronic and telecommunication equipment - Marking codes17P;A4

IEC 61606-1997 音频和视听设备.数字声频元件.声频特性测量的基本方法Audio and audiovisual equipment - Digital audio parts - Basic methods of measurement of audiocharacteristics63P;A4

IEC 61609-1996 微波铁氧体元件.规范制定指南Microwave ferrite components - Guide for the drafting of specifications11P;A4

IEC 61610-1995 电子源制相片及透明软片.图象质量的评定Prints and transparencies produced from electronic sources - Assessment of image quality69P;A4

IEC 61619-1997 绝缘液.多氯联苯的污染度.毛细管气相色谱测定法Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determinationby capillary column gas chromatography62P;A4

IEC 61620-1998绝缘液体.通过测量电导率和电容量来测定介电损耗因数.试验方法

Insulating liquids - Determination of dielectric dissipation factor by measurement of theconductance and capacitance - Test method43P;A4

IEC 61621-1997 干燥实心绝缘材料.耐高压低电流电弧放电的试验Dry, solid insulating materials - Resistance test to high-voltage, low current arc discharges25P;A4

IEC 61628-1-1997 电工用瓦珑层压纸板和瓦珑层压纸

Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designationsand general requirements11P;A4

IEC 61628-2-1998 电工用瓦珑层压纸板和瓦珑层压纸.第2部分:试验方法Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test25P;A4

IEC 61629-1-1996 电子设备用芳族聚酰胺板.第1部分:定义、命名和一般要求Aramid pressboard for electrical purposes - Part 1: Definitions, designations and generalrequirements9P;A4

IEC 61629-2-1996 电子设备用芳族聚酰胺板.第2部分:试验方法Aramid pressboard for electrical purposes - Part 2: Methods of test5P;A4

IEC 61631-2001 磁性氧化物制芯的机械强度的试验方法Test method for the mechanical strength of cores made of magnetic oxides11P;A4

IEC 61642-1997 受谐波影响的工业交流电网.过滤器和并联电容器的应用Industrial a.c. networks affected by harmonics - Application of filters and shunt capacitors59P;A4

IEC 61643-1 AMD 1-2001与低压配电系统相连接的过电压保护装置.第1部分:性能要

求和试验方法.修改件1

Surge protective devices connected to low-voltage power distribution systems - Part 1:Performance requirements and testing methods; Amendment 145P;A4

IEC 61643-1 Edition 1.1-2002接到低压配电系统的浪涌装置.第1部分:性能要求和试验方

法

Surge protective devices connected to low-voltage power distribution systems - Part 1:Performance requirements and testing methods149P;A4

（297） 351

IEC标准目录


开本页数

IEC 61643-1-1998接到低压配电系统的浪涌保护装置.第1部分:性能要求和试

验方法

Surge protective devices connected to low-voltage power distribution systems - Part 1:Performance requirements and testing methods131P;A4

IEC 61643-12-2002低压电涌保护装置.第12部分:连接到低压配电系统的电涌

保护装置.选择和应用原理

Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems; Selection and application principles237P;A4

IEC 61643-21-2000低压电涌保护装置.第21部分:与电信和信令网络相连接的

过电压保护装置.性能要求和试验方法

Low voltage surge protective devices - Part 21: Surge protective devices connected totelecommunications and signalling networks; Performance requirements and testing methods

IEC 61643-311-2001 低压浪涌保护装置元器件.第311部分:气体放电管规范Components for low-voltage surge protective devices - Part 311: Specification for gas dischargetubes (GDT)41P;A4

IEC 61643-321-2001 低压浪涌保护装置元件.第321部分:雪崩击穿二极管(ABD)Components for low-voltage surge protection devices - Part 321: Specifications for AvalancheBreakdown Diode (ABD)31P;A4

IEC 61643-341-2001低压过电压保护装置元件.第341部分:半导体闸流阀平压装

置(TSS)规范

Components for low-voltage surge protective devices - Part 341: Specification for thyristor surgesuppressors (TSS)123P;A4

IEC 61646-1996 薄膜地面光电(PV)模数.设计质量和型号核准Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval85P;A4

IEC 61649-1997 魏布尔分布数据用拟合良好性检定,置信区间和低置信界限Goodness-of-fit tests, confidence intervals and lower confidence limits for Weibull distributed data31P;A4

IEC 61650-1997可靠性数据分析技术.两种恒定故障率和两种恒定故障(元素)强度的比较程序

Reliability data analysis techniques - Procedures for comparison of two constant failure rates andtwo constant failure (event) intensities39P;A4

IEC 61660-1-1997发电厂和变电所中直流辅助设备的短路电流.第1部分:短路

电流的计算

Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1:Calculation of short-circuit currents69P;A4

IEC 61660-2-1997发电厂和变电所中直流辅助设备的短路电流.第2部分:结果

计算

Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2:Calculation of effects75P;A4

IEC 61663-1-1999 避雷装置.电信线路.第1部分:光纤安装Lightning protection - Telecommunication lines - Part 1: Fibre optic installations69P;A4

IEC 61663-2-2001 避雷装置.电信线路.第2部分:金属导线Lightning protection - Telecommunication lines - Part 2: Lines using metallic conductors103P;A4

IEC 61666-1997 工业系统、装置、设备和工业产品.系统中终端的标识Industrial systems, installations and equipment and industrial products - Identification of terminalswithin a system25P;A4

IEC 61669-2001 电声学.助听器声音特性测量的设备Electroacoustics - Equipment for the measurement of real-ear acoustical characteristics ofhearing aids35P;A4

（298） 351

IEC标准目录


开本页数

IEC 61672-1-2002 电声学.声级计.第1部分:规范Electroacoustics - Sound level meters - Part 1: Specifications85P;A4

IEC 61674 AMD 1-2002医用电气设备.用于X射线诊断成像中带电离室和/或半导体

探测器的剂量仪.修改件1

Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductordetectors as used in X-ray diagnostic imaging; Amendment 13P;A4

IEC 61674-1997医用电气设备.用于X射线诊断成像中带电离室和/或半导体

探测器的剂量仪

Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductordetectors as used in X-ray diagnostic imaging69P;A4

IEC 61675-1-1998放射性核素影像装置.性能和试验条件.第1部分:正电子放射

层析X射线摄影机

Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emissiontomographs36P;A4

IEC 61675-2-1998放射性核素成像设备.试验条件和特性.第2部分:计算单光子

发射计算机断层摄影

Radionuclide imaging devices - Characteristics and test conditions - Part 2: Single photonemission computed tomographs24P;A4

IEC 61675-3-1998放射性核素影像装置.性能和试验条件.第3部分:γ照相机为

基础的全身成像系统

Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camerabased wholebody imaging systems8P;A4

IEC 61676-2002医用电气设备.在放射诊断中X射线管电压的无伤害性测量

用剂量测定仪器

Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology32P;A4

IEC 61683-1999 光电系统.电功率调节器.测量效能方法Photovoltaic systems - Power conditioners - Procedure for measuring efficiency20P;A4

IEC 61685-2001 超声学.流量测量系统.流量试验物体Ultrasonics - Flow measurement systems - Flow test object36P;A4

IEC 61689-1996超声波学.物理治疗系统.频率在0.5MHz到5MHz范围内的

测量方法和性能要求

Ultrasonics - Physiotherapy systems - Performance requirements and methods of measurementin the frequency range 0,5 MHz to 5 MHz112P;A4

IEC 61691-1-1997 语言设计自动化.第1部分:VHDL语言参考手册Design automation - Part 1: VHDL language reference manual252P;A4

IEC 61691-2-2001 行为语言.第2部分:模型互通性用VHDL多种逻辑系统Behavioural languages - Part 2: VHDL multilogic system for model interoperability25P;A4

IEC 61691-3-2-2001 行为语言.第3-2部分:VHDL中的数学操作Behavioural languages - Part 3-2: Mathematical operation in VHDL40P;A4

IEC 61691-3-3-2001 行为语言.第3-3部分:超高速集成电路硬件说明语言的综合

性

Behavioural languages - Part 3-3: Synthesis in VHDL48P;A4

IEC 61701-1995 光电组件盐雾防腐试验Salt mist corrosion testing of photovoltaic (PV) modules7P;A4

IEC 61702-1995 直接连接光电泵装置的额定值Rating of direct coupled photovoltaic (PV) pumping systems9P;A4

（299） 351

IEC标准目录


开本页数

IEC 61703-2001 可靠性、有效性、维修性和维修支持术语的数学表示Mathematical expressions for reliability, availability, maintainability and maintenance supportterms

IEC 61709-1996 电子元件的可靠性.衰弱率的标准条件和转向用压缩模型Electronic components - Reliability - Reference conditions for failure rates and stress models forconversion83P;A4

IEC 61710-2000 幂律模型.适合度检测和估计方法Power law model - Goodness-of-fit tests and estimation methods77P;A4

IEC 61713-2000 软件整个使用期的使用可靠性.应用指南Software dependability through the software life-cycle processes - Application guide67P;A4

IEC 61721-1995 光电组件对冲击碰撞的灵敏度(抗冲击试验)Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impacttest)

IEC 61724-1998 光电系统性能检测仪.测量,转换和数据分析指南Photovoltaic system performance monitoring - Guidelines for measurement, data exchange andanalysis17P;A4

IEC 61725-1997 每日太阳外形的分析表达式Analytical expression for daily solar profiles13P;A4

IEC 61727-1995 光电器件(PV)系统.通用接口的特性Photovoltaic (PV) systems - Characteristics of the utility interface25P;A4

IEC 61739-1996 集成电路.生产线的批准程序和质量管理Integrated circuits - Procedures for manufacturing line approval and quality management35P;A4

IEC 61744-2001 光纤色散试验装置的校准Calibration of fibre optic chromatic dispersion test sets45P;A4

IEC 61745-1998 光学纤维几何测试组件用端面图形分析结果End-face image analysis procedure for the calibration of optical fibre geometry test sets34P;A4

IEC 61746-2001 光学时域反射计的校正Calibration of optical time-domain reflectometers (OTDRs)131P;A4

IEC 61747-1-1998 液晶和固态显示装置.第1部分:一般规范Liquid crystal and solid-state display devices - Part 1: Generic specification61P;A4

IEC 61747-2-1-1998液晶和固体显示器.第2-1部分:无源矩阵单色液晶显示模件.空白详细规范

Liquid crystal and solid-state display devices - Part 2-1: Passive matrix monochrome LCDmodules - Blank detail specification19P;A4

IEC 61747-2-1998 液晶和固体显示器.第2部分:液晶显示模件.分规范Liquid crystal and solid-state display devices - Part 2: Liquid crystal display modules - Sectionalspecification27P;A4

IEC 61747-3-1-1998液晶和固态显示装置.第3-1部分:液晶显示电池.空白详细规

范

Liquid crystal and solid-state display devices - Part 3-1: Liquid crystal display (LCD) cells - Blankdetail specification17P;A4

IEC 61747-3-1998液晶显示装置和固体显示装置.第3部分:液晶显示屏的分规

范

Liquid crystal and solid state display devices - Part 3: Sectional specification for liquid crystaldisplay (LCD) cells13P;A4

（300） 351

IEC标准目录


开本页数

IEC 61747-4-1998液晶和固态显示装置.第4部分:液晶显示模件和电池.基本额

定值和特性

Liquid crystal and solid-state display devices - Part 4: Liquid crystal display modules and cells -Essential ratings and characteristics19P;A4

IEC 61747-5-1998 液晶和固态显示装置.第5部分:环境,耐久性和机械试验方法Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanicaltest methods73P;A4

IEC 61751-1998 电信用激光模量.可靠性评定Laser modules used for telecommunication - Reliability assessment69P;A4

IEC 61753-021-2-2002纤维光学互连器件和无源元件性能标准.第021-2部分:C类

单模光纤连接器终端.控制环境

Fibre optic interconnecting devices and passive component performance standard - Part 021-2:Fibre optic connectors terminated on single-mode fibre for category C; Controlled environment35P;A4

IEC 61753-022-2-2003光纤互连装置和无源部件性能标准.第022-2部分:C类多模

光纤连接器终端.受控环境

Fibre optic interconnecting devices and passive components performance standard - Part 022-2:Fibre optic connectors terminated on multimode fibre for category C; Controlled environment18P;A4

IEC 61753-051-3-2001纤维光学互连器件和无源元件性能标准.第051-3部分:U类

单模光纤接插固定衰减器.非受控环境

Fibre optic interconnecting devices and passive components performance standard - Part 051-3:Single-mode fibre, plug-style fixed attenuators for category U; Uncontrolled environment15P;A4

IEC 61753-052-3-2001纤维光学互连器件和无源元件性能标准.第052-3部分:U类

单模光纤带尾固定衰减器.非受控环境

Fibre optic interconnecting devices and passive components performance standard - Part 052-3:Single-mode fibre pigtailed-style fixed attenuators for category U; Uncontrolled environment17P;A4

IEC 61753-1-1-2000光纤互连设备和无源部件性能标准.第1-1部分:总则和指南.互连设备(连接器)

Fibre optic interconnecting devices and passive components performance standard - Part 1-1:General and guidance; Interconnecting devices (connectors)23P;A4

IEC 61753-2-1-2000光纤互连装置和无源部件性能标准.第2-1部分:端接于U等

级单模纤维的光纤连接器.非受控环境

Fibre optic interconnecting devices and passive components performance standard - Part 2-1:Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment33P;A4

IEC 61753-2-3-2001光纤互连装置和无源部件性能标准.第2-3部分:U类非连接

式单模1PtN和2PtN无波长选定分支器件.非受控环境

Fibre optic interconnecting devices and passive components performance standard - Part 2-3:Non-connectorised single-mode 1濶 and 2濶 non-wavelength-selective branching devices forcategory U; Uncontrolled environment17P;A4

IEC 61754-10-2000 纤维光学连接器接口.第10部分:小型MPO连接器系列Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family37P;A4

IEC 61754-1-1996 纤维光学连接器接口.第1部分:总则和导则Fibre optic connector interfaces - Part 1: General and guidance19P;A4

IEC 61754-12-1999 光纤连接器接口.第12部分:FS 型连接器系列Fibre optic connector interfaces - Part 12: Type FS connector family89P;A4

IEC 61754-13-1999 光纤连接器接口.第13部分:FC和PC型连接器Fibre optic connector interfaces - Part 13: Type FC-PC connector family27P;A4

IEC 61754-15-1999 光纤连接器接口.第15部分:LSH型连接器系列Fibre optic connector interfaces - Part 15: Type LSH connector family51P;A4

（301） 351

IEC标准目录


开本页数

IEC 61754-16-1999 光纤连接器接口.第16部分:PN型连接器系列Fibre optic connector interfaces - Part 16: Type PN connector family23P;A4

IEC 61754-18-2001 纤维光学连接器接口.第18部分:MT-RJ型连接器系列Fibre optic connector interfaces - Part 18: Type MT-RJ connector family18P;A4

IEC 61754-19-2001 纤维光学连接器接口.第19部分:SG型连接器系列Fibre optic connector interfaces - Part 19: Type SG connector family19P;A4

IEC 61754-20-2002 纤维光学连接器接口.第20部分:LC型连接器门类Fibre optic connector interfaces - Part 20: Type LC connector family31P;A4

IEC 61754-2-1996 纤维光学连接器接口.第2部分:BFOC/2,5 型连接器族Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family19P;A4

IEC 61754-3-1996 纤维光学连接器接口.第3部分:LSA 型连接器门类Fibre optic connector interfaces - Part 3: Type LSA connector family9P;A4

IEC 61754-4 AMD 1-1999 光纤连接器接口.第4部分:SC型连接器系列.补充件1Fibre optic connector interfaces - Part 4: Type SC connector family; Amendment 133P;A4

IEC 61754-4 AMD 2-2001 光纤连接器接口.第4部分:SC型连接器系列.修改件2Fibre optic connector interfaces - Part 4: Type SC connector family; Amendment 237P;A4

IEC 61754-4 Edition 1.1-2000 光纤连接器接口.第4部分:SC型连接器系列Fibre optic connector interfaces - Part 4: Type SC connector family49P;A4

IEC 61754-4 Edition 1.2-2002 光纤连接器接口.第4部分:SC型连接器系列Fibre optic connector interfaces - Part 4: Type SC connector family83P;A4

IEC 61754-4-1-2003纤维光学连接器接口.第4-1部分:SC型连接器系列.简化SC-PC连接器接口

Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptable SC-PC connector interfaces16P;A4

IEC 61754-4-1997 光纤连接器接口.第4部分:SC型连接器系列Fibre optic connector interfaces - Part 4: Type SC connector family19P;A4

IEC 61754-5-1996 纤维光学连接器接口.第5部分:MT 型连接器族Fibre optic connector interfaces - Part 5: Type MT connector family11P;A4

IEC 61754-6 AMD 1-2001 光纤连接器接口.第6部分:MU型连接器系列.修改件1Fibre optic connector interfaces - Part 6: Type MU connector family; Amendment 121P;A4

IEC 61754-6 Edition 1.1-2001 光纤连接器接口.第6部分:MU型连接器系列Fibre optic connector interfaces - Part 6: Type MU connector family85P;A4

IEC 61754-6-1-2003光纤连接器接口.第6-1部分:MU型连接器系列.简化可接收

的MU-PC连接器接口

Fibre optic connector interfaces - Part 6-1: Type MU connector family; Simplified receptable MU-PC connector interfaces14P;A4

IEC 61754-6-1997 光纤连接器接口.第6部分:MU型连接器系列Fibre optic connector interfaces - Part 6: Type MU connector family67P;A4

IEC 61754-7 AMD 1-1999 光纤连接器接口.第7部分:MPO 型连接器系列.第1次修订Fibre optic connector interfaces - Part 7: Type MPO connector family; Amendment 16P;A4

IEC 61754-7 AMD 2-2000 光纤连接器接口.第7部分:MPO 型连接器系列.修改件2Fibre optic connector interfaces - Part 7: Type MPO connector family; Amendment 29P;A4

（302） 351

IEC标准目录


开本页数

IEC 61754-8-1996 光纤连接器接口.第8部分:CF08 连接器种类Fibre optic connector interfaces - Part 8: CF08 connector family15P;A4

IEC 61754-9-1996 纤维光学连接器接口.第9部分:DS 型连接器族Fibre optic connector interfaces - Part 9: Type DS connector family9P;A4

IEC 61757-1-1998 纤维光学传感器.第1部分:总规范Fibre optic sensors - Part 1: Generic specification55P;A4

IEC 61760-1-1998表面安装技术.第1部分:表面安装元件的(SMDs)规范的标准

方法

Surface mounting technology - Part 1: Standard method for the specification for surface mountingcomponents (SMDs)53P;A4

IEC 61760-2-1998表面安装工艺.第2部分:表面安装设备(SMD)的运输和存储

条件.使用指南

Surface mounting technology - Part 2: Transportation and storage conditions of surface mountingdevices (SMD) - Application guide9P;A4

IEC 61770-1998 与总水管连接的电气器具.避免软管组件的反虹吸和失效Electric appliances connected to the water mains - Avoidance of backsiphonage and failure ofhose-sets20P;A4

IEC 61771-1995 核电站.主要控制间.设计的鉴定和批准Nuclear power plants - Main control room - Verification and validation of design87P;A4

IEC 61772-1995 核电厂.主控间.直观显示装置的应用Nuclear power plants - Main control room - Application of visual display units (VDU)51P;A4

IEC 61773-1996 架空线.建筑基地试验Overhead lines - Testing of foundations for structures91P;A4

IEC 61779-1-1998可燃性气体的检测和测量的电气装置.第1部分:一般要求和

试验方法

Electrical apparatus for the detection and measurement of flammable gases - Part 1: Generalrequirements and test methods55P;A4

IEC 61779-2-1998可燃性气体的检测和测量的电气装置.第2部分:1组装置指

示空气中甲烷含量达到容量的5%时的性能要求

Electrical apparatus for the detection and measurement of flammable gases - Part 2:Performance requirements for group I apparatus indicating a volume fraction up to 5 % methanein air


示甲烷含量达到空气容量的100%时的性能要求

Electrical apparatus for the detection and measurement of flammable gases - Part 3:Performance requirements for group I apparatus indicating a volume fraction up to 100 %methane in air


示低爆炸极限达到100%时的性能要求

Electrical apparatus for the detection and measurement of flammable gases - Part 4:Performance requirements for group II apparatus indicating a volume fraction up to 100 % lowerexplosive limit


示煤气达到100%时的性能要求

Electrical apparatus for the detection and measurement of flammable gases - Part 5:Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas7P;A4

IEC 61779-6-1999可燃性气体的检测和测量的电气装置.第6部分:可燃气体检

测和测量装置的选择,安装,使用和维护指南

Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide forthe selection, installation, use and maintenance of apparatus for the detection and measurementof flammable gases58P;A4

（303） 351

IEC标准目录


开本页数

IEC 61786-1998考虑人体暴露的低频电场和磁场的测量.测量指南和指导的

特殊要求

Measurement of low-frequency magnetic and electric fields with regard to exposure of humanbeings - Special requirements for instruments and guidance for measurements177P;A4

IEC 61788-10-2002超导性.第10部分:临界温度测量.用电阻法对Nb-Ti, NbSn和铋-系统氧化物复合超导体的临界温度的测量

Superconductivity - Part 10: Critical temperature measurement; Critical temperature of Nb-Ti,NbSn, and Bi-system oxide composite superconductors by a resistance method23P;A4

IEC 61788-11-2003超导性.第11部分:剩余电阻率的测量.NbSn复合超导体的剩

余电阻率

Superconductivity - Part 11: Residual resistance ratio measurement; Residual resistance ratio ofNbSn composite superconductors36P;A4

IEC 61788-1-1998超导体.第1部分:临界电流测量.铜/铌-钛复合超导体的直流

临界电流

Superconductivity - Part 1: Critical current measurement - DC critical current of Cu/Nb-Ticomposite superconductors43P;A4

IEC 61788-12-2002超导性.第12部分:基块超导体体积比例的测量.NbSn复合超

导金属线的铜对非铜体积比例

Superconductivity - Part 12: Matrix to superconductor volume ratio measurement; Copper to non-copper volume ration of NbSn composite superconducting wires29P;A4

IEC 61788-2-1999超导体.第2部分:临界电流测量.铌(指数3)/Sn复合超导体的

直流临界电流

Superconductivity - Part 2: Critical current measurement - DC critical current of NbSn compositesuperconductors57P;A4

IEC 61788-3-2000超导性.第3部分:临界电流测量.Ag护套的Bi-2212和Bi-2223氧化超导体的直流临界电流

Superconductivity - Part 3: Critical current measurement; DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors21P;A4

IEC 61788-4-2001超导性.第4部分:剩余电阻比测量.Nb-Ti复合超导体的剩余

电阻比

Superconductivity - Part 4: Residual resistance ratio measurement; Residual resistance ratio ofNb-Ti composite superconductors19P;A4

IEC 61788-5-2000超导性.第5部分:超导体容量比率测量矩阵.Cu/Nb-Ti复合超

导体的铜对超导容量比率

Superconductivity - Part 5: Matrix to superconductor volume ratio measurement; Copper tosuperconductor volume ratio of Cu/Nb-Ti composite superconductors14P;A4

IEC 61788-6-2000超导性.第6部分:机械特性测量.Cu/Nb-Ti复合超导体的铜对

超导体容量比率的测量

Superconductivity - Part 6: Mechanical properties measurement; Room temperature tensile testof Cu/Nb-Ti composite superconductors17P;A4

IEC 61788-7-2002 超导性.第7部分:电特性测量.微波频率下超导体的表面电阻Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance ofsuperconductors at microwave frequencies25P;A4

IEC 61797-1-1996电信和电子设备用变压器和感应器.线圈架的主要尺寸.第1部分:叠层铁芯线圈架

Transformers and inductors for use in telecommunication and electronic equipment - Maindimensions of coil formers - Part 1: Coil formers for laminated cores45P;A4

IEC 61800-1-1997可调速的电驱动系统.第1部分:一般要求.低电压可调速的直

流电驱动系统的额定规范

Adjustable speed electrical power drive systems - Part 1: General requirements - Ratingspecifications for low voltage adjustable speed d.c. power drive systems201P;A4

（304） 351

IEC标准目录


开本页数

IEC 61800-2-1998可调速的电驱动系统.第2部分:一般要求.低电压可调频的交

流电驱动系统的额定规范

Adjustable speed electrical power drive systems - Part 2: General requirements - Ratingspecifications for low voltage adjustable frequency a.c. power drive systems175P;A4

IEC 61800-3-1996可调速电力传动系统.第3部分:包括特定试验方法的电磁兼

容(EMC)产品标准

Adjustable speed electrical power drive systems - Part 3: EMC product standard includingspecific test methods171P;A4

IEC 61800-4-2002可调速的电气动力驱动系统.第4部分:一般要求.大于1000V但不超过35KV交流电的交流动力驱动系统的等级规范

Adjustable speed electrical power drive systems - Part 4: General requirements; Ratingspecifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV219P;A4

IEC 61800-5-1-2003 可调速的电驱动系统.第5-1部分:安全要求.电、热及能量Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical,thermal and energy184P;A4

IEC 61803-1999 高压直接电流(HVDC)转换站功率损失的测定Determination of power losses in high-voltage direct current (HVDC) converter stations65P;A4

IEC 61808-1999含碱性或其它非酸性电解质的二次电池及蓄电池.密封的可

再充电的镍氢扣式单电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride button rechargeable single cells23P;A4

IEC 61810-1-1998 机电式非定时限有或无继电器.第1部分:一般要求Electromechanical non-specified time all-or-nothing relays - Part 1: General requirements57P;A4

IEC 61810-5-1998 机电的非特定的有或无继电器.第2部分:绝缘协同性Electromechanical non-specified time all-or-nothing relays - Part 5: Insulation coordination31P;A4

IEC 61810-7-1997 电机"有"或"无"继电器.第7部分:试验和测量程序Electromechanical all-or-nothing relays - Part 7: Test and measurement procedures141P;A4

IEC 61811-10-2002经质量评定的机电式有或无继电器.第10部分:分规范.工业

用继电器

Electromechanical elementary relays of assessed quality - Part 10: Sectional specification;Relays for industrial application21P;A4

IEC 61811-11-2002经质量评定的机电式有或无继电器.第11部分:空白详细规

范.工业用继电器

Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification;Relays for industrial application20P;A4

IEC 61811-1-1999已评定质量的机电非特定的"有"或"无"继电器.第1部分:通用

规范

Electromechanical non-specified time all-or-nothing relays of assessed quality - Part 1: Genericspecification21P;A4

IEC 61811-50-2002机电式有或无继电器.第50部分:分规范.经质量评定的机电

式有或无电信继电器

Electromechanical all-or-nothing relays - Part 50: Sectional specification; Electromechanical all-or-nothing telecom relays of assessed quality22P;A4

IEC 61811-51-2002机电式有或无继电器.第51部分:空白详细规范.经质量评定

的机电式有或无电信继电器.非标准类型和结构

Electromechanical all-or-nothing relays - Part 51: Blank detail specification; Electromechanicalall-or-nothing telecom relays of assessed quality; Non-standardized types and construction25P;A4

（305） 351

IEC标准目录


开本页数


的机电式有或无电信继电器.20 mm X 10 mm底座,2组转换

触点

Electromechanical all-or-nothing relay - Part 52: Blank detail specification; Electromechanical all-or-nothing telecom relays of assessed quality; Two change-over contacts, 20 mm x 10 mm base26P;A4


的机电式有或无电信继电器.14 mm X 9 mm底座,2组转换

触点

Electromechanical all-or-nothing relays - Part 53: Blank detail specification; Electromechanicalall-or-nothing telecom relays of assessed quality; Two change-over contacts, 14 mm x 9 mmbase

IEC 61811-54-2002机电"有"或"无"继电器.第54部分:空白详细规范.经质量认证

的机电"有"或"无"电信继电器.15 mm X 7.5 mm 基的双转

化触点

Electromechanical all-or-nothing relays - Part 54: Blank detail specification; Electromechanicalall-or-nothing telecom relays of assessed quality; Two change-over contacts, 15 mm x 7,5 mmbase

IEC 61811-55-2002机电"有"或"无"继电器.第55部分:空白详细规范.经质量认证

的机电"有"或"无"电信继电器.11 mm X 5.5 mm 基的双转

化触点

Electromechanical all-or-nothing relays - Part 55: Blank detail specification; Electromechanicalall-or-nothing telecom relays of assessed quality; Two change-over contacts, 11 mm x 7,5 mm(max.) base

IEC 61812-1-1996 工业用规定时间继电器.第1部分;要求和试验Specified time relays for industrial use - Part 1: Requirements and tests53P;A4

IEC 61817-2000 烹调、烤架和类似用途的家用便携式用具.性能的测量方法Household portable appliances for cooking, grilling, and similar use - Methods for measuringperformance59P;A4

IEC 61821-2002机场照明和航路信标用电气装置.航空地面照明恒流串联电

路的维修

Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronauticalground lighting constant current series circuits53P;A4

IEC 61822-2002 机场的照明和信号灯的电气装置.恒流调节器Electrical installations for lighting and beaconing of aerodromes - Constant current regulators22P;A4

IEC 61823-2002 机场照明和信标导航用电气设备.AGL系列变压器Electrical installations for lighting and beaconing of aerodromes - AGL series transformers22P;A4

IEC 61828-2001 超声学.调焦传感器.传输区的定义和测量方法Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmittedfields

IEC 61829-1995 晶硅光电矩阵.I-V特性现场测量Crystalline silicon photovoltaic (PV) array - On-site measurement of I-V characteristics19P;A4

IEC 61830-1997 微波铁酸盐化合物.较大特性的测量方法Microwave ferrite components - Measuring methods for major properties25P;A4

IEC 61834-1 AMD 1-2001录音.为用户使用的(525-60.625-50,1125-60和1250-50系统)用6,35mm磁带的螺旋扫描数字视频盒式录音系统.第1部分:一般规范.修改件1

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 1: Generalspecifications; Amendment 19P;A4

IEC 61834-1 Edition 1.1-2001录音.消费者使用的(525-60、625-50、1125-60和1250-50系统)使用6.35mm磁带的螺旋扫描数字视频盒式录音系统.第1部分:总规范

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 1: Generalspecifications125P A4

IEC 61834-10-2001录音.为用户使用的(525-60.625-50,1125-60和1250-50系统)用6,35mm磁带的螺旋扫描数字视频盒式录音系统.第10部分:DTV格式

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 10: DTV format81P;A4

（306） 351

IEC标准目录


开本页数

IEC 61834-2-1998录音.为用户使用的(525-60.625-50,1125-60和1250-50系统)用6,35mm磁带的垂直扫描数字视频盒式录音系统.第2部分:525-60和625-50系统用SD-格式化

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 2: SD format for 525-60and 625-50 systems249P;A4

IEC 61834-3-1999录音.为用户使用的(525-60、625-50、1125-60和1250-50系统)用6.35mm磁带的螺旋扫描数字视频盒式录音系统.第3部分:1125-60和1250-50系统的HD格式

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 3: HD format for 1125-60 and 1250-50 systems61P;A4

IEC 61834-4-1998录音.用户使用的(525-60.625-50,1125-50系统)6,35MM磁

带的垂直扫描数字视频盒式录音系统.第4部分:包装标题表

格和内容

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header tableand contents189P;A4

IEC 61834-5-1998录音.为用户使用的(525-60.625-50,1125-60和1250-50系统)用6,35mm磁带的垂直扫描数字视频盒式录音系统.第3部分:特性信息系统

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 5: The characterinformation system50P;A4

IEC 61834-6-2000录音.为用户使用的(525-60、625-50、1125-60和1250-50系统)用6.35mm磁带的螺旋扫描数字视频盒式录音系统.第6部分:SDL格式

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 6: SDL format

IEC 61834-7-2001录音.为用户使用的(525-60,625-50,1125-60和1250-50系统)用6,35mm磁带的螺旋扫描数字视频盒式录音系统.第7部分:EDTV2格式

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 7: EDTV2 format25P;A4

IEC 61834-8-2001录音.消费者使用的(525-60、625-50、1125-60和1250-50系统)使用6.35mm磁带的螺旋扫描数字视频盒式录音系统.第8部分:625-50系统用PAL+格式

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 8: PALplus format for625-50 systems25P;A4

IEC 61834-9-2001录音.为用户使用的(525-60.625-50,1125-60和1250-50系统)用6,35mm磁带的螺旋扫描数字视频盒式录音系统.第9部分:DVB格式

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 9: DVB format81P;A4

IEC 61835-1998使用12,65MM磁带的垂直扫描数字视频盒式录音系统.D-5格式

Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in)magnetic tape - Format D-5295P;A4

IEC 61837-1-1999频率控制和选则用表面安装的压电器件.标准外形和终端引

线的连接.第1部分:塑料模压外壳外形

Surface mounted piezoelectric devices for frequency control and selection - Standard outlinesand terminal lead connections - Part 1: Plastic moulded enclosure outlines53P;A4

IEC 61837-2-2000频率控制和选择用表面安装的压电器件.标准外形和终端引

线的连接.第2部分:陶瓷外壳

Surface mounted piezoelectric devices for frequency control and selection - Standard outlinesand terminal lead connections - Part 2: Ceramic enclosures

IEC 61837-3-2000频率控制和选择用表面安装的压电器件.标准外形和终端引

线的连接.第3部分:金属外壳

Surface mounted piezoelectric devices for frequency control and selection - Standard outlinesand terminal lead connections - Part 3: Metal enclosures

（307） 351

IEC标准目录


开本页数

IEC 61839-2000 核电厂.控制室的设计.功能分析和测定Nuclear power plants - Design of control rooms - Functional analysis and assignment39P;A4

IEC 61842-2002 语音通信用传声器和耳机Microphones and earphones for speech communications28P;A4

IEC 61843-1997 回转磁设施中互相调制乘积发生水平的测量方法Measuring method for the level of intermodulation products generated in a gyromagnetic device13P;A4

IEC 61846-1998 超声波.压力脉冲碎石器.电磁场特性Ultrasonics - Pressure pulse lithotripters - Characteristics of fields26P;A4

IEC 61847-1998 超声波.外科装置.基本输出特性的测量和说明Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics31P;A4

IEC 61850-3-2002 变电所的通信网络和系统.第3部分:一般要求Communication networks and systems in substations - Part 3: General requirements33P;A4

IEC 61850-4-2002 变电所的通信网络和系统.第4部分:系统和项目管理Communication networks and systems in substations - Part 4: System and project management59P;A4

IEC 61851-1-2001 电动车辆感应放电系统.第1部分:一般要求Electric vehicle conductive charging system - Part 1: General requirements39P;A4

IEC 61851-21-2001电动车辆感应充电系统.第21部分:与直流/交流电源感应连

接的电动车辆要求

Electric vehicle conductive charging system - Part 21: Electric vehicle requirements forconductive connection to an a.c./d.c. supply29P;A4

IEC 61851-22-2001 电动车辆感应充电系统.第22部分:交流电动车辆充电站Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station41P;A4

IEC 61854-1998 架空线.隔离层的要求和检验Overhead lines - Requirements and tests for spacers83P;A4

IEC 61855-2003 家用电动毛发护理用具.性能的测量方法Household electrical hair care appliances - Methods of measuring the performance28P;A4

IEC 61857-1-1998 电绝缘系统.热评估过程.第1部分:一般要求.低电压Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements -Low-voltage31P;A4

IEC 61857-21-1998电气绝缘系统.热评估过程.第1部分:一般用途模型的特殊要

求.绕线应用

Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirementsfor general-purpose model - Wire-wound applications19P;A4

IEC 61857-22-2002电气绝缘结构.热评定规程.第22部分:密封圈模型的特殊要

求.绕线电气绝缘结构(EIS)

Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirementsfor encapsulated-coil model; Wire-wound electrical insulation system (EIS)19P;A4

IEC 61857-23-2002电气绝缘结构.热评定规程.第23部分:通用深槽模型的特殊

要求.绕线电气绝缘结构(EIS)

Electrical insulation systems - Procedures for thermal evaluation - Part 23: Specific requirementsfor general purpose, tall-channel model; Wire-wound electrical insulation system (EIS)23P;A4

IEC 61858-1999 电绝缘系统.对已确立绕组线EIS改进的热评估Electrical insulation systems - Thermal evaluation of modifications to an established wire-woundEIS

（308） 351

IEC标准目录


开本页数

IEC 61860-2000 磁性氧化物制成的薄断面芯的尺寸Dimensions of low-profile cores made of magnetic oxides17P;A4

IEC 61865-2001架空线.带电部分和障碍物间距离的电气元件的计算.计算

方法

Overhead lines - Calculation of the electrical component of distance between live parts andobstacles - Method of calculation45P;A4

IEC 61866-1997 声图信号传输系统.人-机对话的文本传输系统(ITTS)Audiovisual systems - Interactive text transmission system (ITTS)109P;A4

IEC 61868-1998 矿物绝缘油.在很低的温度下运动粘稠度的测定Mineral insulating oils - Determination of kinematic viscosity at very low temperatures21P;A4

IEC 61874-1998 核装置.测定岩石密度的地球物理钻孔装置("密度测井")Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density("density logging")27P;A4

IEC 61880-1998视频系统(525/60).使用垂直消隐间距的视频和伴音数据.模拟界面

Video systems (525/60) - Video and accompanied data using the vertical blanking interval -Analogue interface21P;A4

IEC 61880-2-2002视频系统(525/60).使用垂直消隐间距的视频和伴音数据.模拟界面.第2部分:525推进式扫描系统

Video systems (525/60) - Video and accompanied data using the vertical blanking interval;Analogue interface - Part 2: 525 progressive scan system11P;A4

IEC 61881-1999 铁路设施.铁路车辆设备.电力电子设备用电容器Railway applications - Rolling stock equipment - Capacitors for power electronics85P;A4

IEC 61882-2001 危害和工作性能的研究.应用指南Hazard and operability studies (HAZOP studies) - Application guide113P;A4

IEC 61883-1-2003 用户音频/视频设备.数字接口.第1部分:总则Consumer audio/video equipment - Digital interface - Part 1: General52P;A4

IEC 61883-2-1998 用户音频/视频设备.数字界面.第2部分:SD-DVCR数据传输Consumer audio/video equipment - Digital interface - Part 2: SD-DVCR data transmission17P;A4

IEC 61883-3-1998 用户音频/视频设备.数字界面.第3部分:HD-DVCR数据传输Consumer audio/video equipment - Digital interface - Part 3: HD-DVCR data transmission15P;A4

IEC 61883-4-1998 用户音频/视频设备.数字界面.第4部分:MPEG2-TS数据传

输

Consumer audio/video equipment - Digital interface - Part 4: MPEG2-TS data transmission23P;A4

IEC 61883-5-1998 用户音频/视频设备.数字界面.第5部分:SDL-DVCR数据传

输

Consumer audio/video equipment - Digital interface - Part 5: SDL-DVCR data transmission17P;A4

IEC 61883-6-2002用户音频/视频设备.数字接口.第6部分:音频和音乐数据传

输协议

Consumer audio/video equipment - Digital interface - Part 6: Audio and music data transmissionprotocol26P;A4

IEC 61883-7-2003用户音频/视频设备.数字接口.第7部分:ITU-R BO.1294系统B传输

Consumer audio/video equipment - Digital interface - Part 7: Transmission of ITU-R BO.1294System B20P;A4

（309） 351

IEC标准目录


开本页数

IEC 61888-2002核电厂.以安全为主的仪器仪表.事故保护定值器的测定和

维护

Nuclear power plants - Instrumentation important to safety - Determination and maintenance oftrip setpoints39P;A4

IEC 61892-1-2001 移动式和固定式近海装置.电力设施.第1部分:一般要求和条

件

Mobile and fixed offshore units - Electrical installations - Part 1: General requirements andconditions

IEC 61892-3-1999 移动和固定的近海设施.电力设备.第3部分:设备Mobile and fixed offshore units - Electrical installations - Part 3: Equipment64P;A4

IEC 61892-5-2000 移动和固定的近海工程装置.电气安装.第5部分:移动装置 Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units

IEC 61892-6-1999 移动和固定的近海设施.电力设备.第6部分:安装Mobile and fixed offshore units - Electrical installations - Part 6: Installation30P;A4

IEC 61892-7-1997 移动和固定的近海设施.电力设备.第7部分:危险区域Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas81P;A4

IEC 61897-1998 架空线.架空线型风振减振器的要求和测试Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers47P;A4

IEC 61904-2000视频记录.使用12.65mm磁带的和包含数据压缩的(数字格

式-L)螺旋式扫描数字元件视频盒式记录格式

Video recording - Helical-scan digital component video cassette recording format using 12,65mm magnetic tape and incorporating data compression (format digital-L)167P;A4

IEC 61909-2000 录音.小型光盘系统 Audio recording - Minidisc system

IEC 61920-1998 红外线传输系统.大气作用Infrared transmission systems - Free air applications51P;A4

IEC 61922-2002 高频感应加热装置.测定发生器功率输出的试验方法High-frequency induction heating installations - Test methods for the determination of poweroutput of the generator33P;A4

IEC 61935-1 AMD 1-2002通用布线系统.根据ISO/IEC 11801对对称通信布线进行检

验的规范.第1部分:电缆敷设.修改1

Generic cabling systems - Specification for the testing of balanced communication cabling inaccordance with ISO/IEC 11801 - Part 1: Installed cabling; Amendment 117P;A4

IEC 61935-1 Edition 1.1-2002通用布线系统.根据ISO/IEC 11801对对称通信布线进行检

验的规范.第1部分:电缆敷设

Generic cabling systems - Specification for the testing of balanced communication cabling inaccordance with ISO/IEC 11801 - Part 1: Installed cabling129P;A4

IEC 61935-1-2000通用布线系统.根据ISO/IEC 11801对平衡通信布线进行检

验的规范.第1部分:电缆敷设

Generic cabling systems - Specification for the testing of balanced communication cabling inaccordance with ISO/IEC 11801 - Part 1: Installed cabling121P;A4

IEC 61936-1-2002 交流电压大于1kV的电力装置.第1部分:通用规则Power installations exceeding 1 kV a.c. - Part 1: Common rules177P;A4

IEC 61937-2000 数字音频.使用IEC 60958的非线性PCM编码音频位流的界

面

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 6095855P;A4

IEC 61937-5-2002数字音频.用于IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第5部分:依据DTS(数字剧院系统格式)的非线性脉冲编码调制(PCM)位流

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part5: Non-linear PCM bitstreams according to the DTS (Digital Theatre Systems format(s))10P;A4

（310） 351

IEC标准目录


开本页数

IEC 61937-6-2002数字音频.用于IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第6部分:依据MPEG-2 AAC格式的非线

性脉冲编码调制(PCM)位流

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part6: Non-linear PCM bitstreams according to the MPEG-2 AAC-format7P;A4

IEC 61937-7-2002数字音频.使用IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的界面.第7部分:根据ATRAC and ATRAC 2/3格式对非线性脉冲编码调制(PCM)位流的使用

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part7: Non-linear PCM bitstreams according to the ATRAC and ATRAC 2/3 formats11P;A4

IEC 61938-1996音频系统,视频系统和声图信号系统.互联和匹配值.模拟信

号推荐匹配值

Audio, video and audiovisual systems - Interconnections and matching values - Preferredmatching values of analogue signals49P;A4

IEC 61939-2000用作锯床的锯台. 大锯条直径为315mm的手控圆锯盘用

锯台.安全要求

Saw tables for use as saw benches - Tables for hand-held circular saws with a maximum saw-blade diameter of 315 mm - Safety requirements16P;A4

IEC 61943-1999 集成电路.生产线验收应用指南Integrated circuits - Manufacturing line approval application guideline47P;A4

IEC 61947-1-2002电子投影.主要性能标准的测量和文件化.第1部分:固定分辨

投影仪

Electronic projection - Measurement and documentation of key performance criteria - Part 1:Fixed resolution projectors34P;A4

IEC 61947-2-2001电子投影.关键性能标准的测量和文献工作.第2部分:不同分

辨率的投影仪

Electronic projection - Measurement and documentation of key performance criteria - Part 2:Variable resolution projectors45P;A4

IEC 61950-1997 电缆管理系统.超重金属导管用电气装置的导管配件规范Cable management systems - Specification for conduit fittings for electrical installations for extra-heavy duty metal conduit91P;A4

IEC 61951-1-2001含碱性或其它非酸性电解质的便携式密封可再充电电池和电池组.第1部分:镍镉电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealedrechargeable single cells - Part 1: Nickel-cadmium63P;A4

IEC 61951-2-2001非酸性电解质便携密封可再充电单电池.第2部分:镍金属氢

化物

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealedrechargeable single cells - Part 2: Nickel-metal hydride37P;A4

IEC 61952-2002架空电线用绝缘子.额定电压为1000V的交流电流用复合线

柱绝缘子

Insulators for overhead lines - Composite line post insulators for alternative current with anominal voltage 1 000 V63P;A4

IEC 61954 AMD 1-2003送电和配电系统用电力电子设备.静态变量补偿器用可控硅

阀门的试验.修改件1

Power electronics for electrical transmission and distribution systems - Testing of thyristor valvesfor static VAR compensators; Amendment 114P;A4

IEC 61954-1999送电和配电系统用电力电子设备.静态变量补偿器用半导体

阀门的试验

Power electronics for electrical transmission and distribution systems - Testing of thyristor valvesfor static VAR compensators85P;A4

（311） 351

IEC标准目录


开本页数

IEC 61958-2000 高压预制开关设备和控制设备组件.电压指示系统High-voltage prefabricated switchgear and controlgear assemblies - Voltage presence indicatingsystems45P;A4

IEC 61960-1-2000 便携式二次锂电池和电池组.第1部分:二次锂电池Secondary lithium cells and batteries for portable applications - Part 1: Secondary lithium cells49P;A4

IEC 61960-2-2001 便携式锂电池和电池组.第2部分:锂电池Secondary lithium cells and batteries for portable applications - Part 2: Secondary lithiumbatteries

IEC 61964-1999 集成线路.存储设备插角配置Integrated circuits - Memory devices pin configurations39P;A4

IEC 61965-2000 阴极射线管的机械安全 Mechanical safety of cathode ray tubes

IEC 61966-2-1 AMD 1-2003多媒体系统和设备.色彩测量和管理.第2-1部分:色彩管理.缺省RGB色彩空间.sRGB.修改1

Multimedia systems and equipment - Colour measurement and management - Partie 2-1: Colourmanagement; Default RGB colour space; sRGB; Amendment 118P;A4

IEC 61966-2-1-1999多媒体系统和设备.颜色测定和管理.第2-1部分:颜色管理.非法RGB色空间.sRGB

Multimedia systems and equipment - Colour measurement and management - Partie 2-1: Colourmanagement - Default RGB colour space - sRGB51P;A4

IEC 61966-2-2-2003多媒体系统和设备.色彩测量和管理.第2-2部分:色彩管理.扩展RGB色彩空间.sRGB

Multimedia systems and equipment - Colour measurement and management - Part 2-2: Colourmanagement; Extended RGB colour space; scRGB22P;A4

IEC 61966-3-2000多媒体系统和设备.颜色测定和管理.第3部分:使用阴极射线

管的设备

Multimedia systems and equipment - Colour measurement and management - Partie 3:Equipment using cathode ray tubes69P;A4

IEC 61966-4-2000多媒体系统和设备.颜色测定和管理.第4部分:使用液晶显示

屏的设备

Multimedia systems and equipment - Colour measurement and management - Partie 4:Equipment using liquid crystal display panels75P;A4

IEC 61966-5-2000多媒体系统和设备.颜色测定和管理.第5部分:使用等离子体

显示屏的设备

Multimedia systems and equipment - Colour measurement and management - Part 5: Equipmentusing plasma display panels34P;A4

IEC 61966-7-1-2001多媒体系统和设备.颜色测定和管理.第7-1部分:彩色打印机

和反射式打印机RGB输入

Multimedia systems and equipment - Colour measurement and management - Part 7-1: Colourprinters; Reflective prints; RGB inputs41P;A4

IEC 61966-8-2001多媒体系统和设备.颜色测定和管理.第8部分:多媒体彩色扫

描器

Multimedia systems and equipment - Colour measurement and management - Part 8: Multimediacolour scanners37P;A4

IEC 61966-9-2000 多媒体系统和设备.颜色测定和管理.第9部分:数字相机Multimedia systems and equipment - Colour measurement and management - Part 9: Digitalcameras

IEC 61967-1-2002集成电路.150kHz-1GHz电磁辐射的测量.第1部分:一般条

件和定义

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1:General conditions and definitions47P;A4

（312） 351

IEC标准目录


开本页数

IEC 61967-4-2002集成电路.150 KHz-1 KHz电磁释放量的测量.第4部分:传导

释放量的测量.1Ω-150Ω直接耦合法

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4:Measurement of conducted emissions; 1 /150 direct coupling method57P;A4

IEC 61967-5-2003集成电路.150kHz-1GHz电磁辐射的测量.第5部分:感应辐

射测量.工作台法拉第筒法

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 5:Measurement of conducted emissions; Workbench Faraday cage method56P;A4

IEC 61967-6-2002集成电路.150kHz-1GHz电磁辐射的测量.第6部分:传导放

射测量.磁探测器法

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6:Measurement of conducted emissions; Magnetic probe method51P;A4

IEC 61969-1-1999 电子设备的机械构造.室外外壳.第1部分:设计导则Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines23P;A4

IEC 61969-2-1-2000电子设备的机械构造.室外外壳.第2-1部分:详细规范.壳体

的尺寸

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-1: Detailspecification - Dimensions for cabinets17P;A4

IEC 61969-2-2000电子设备机械构造.室外外壳.第2部分:分规范.箱和壳体的

协调尺寸

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Sectionalspecification - Coordination dimensions for cases and cabinets19P;A4

IEC 61969-2-2-2000电子设备的机械构造.室外外壳.第2-2部分:详细规范.箱的

尺寸

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-2: Detailspecification - Dimensions for cases17P;A4

IEC 61969-3-2001电子设备机械构造.室外机壳.第3部分:分规范.机壳和机箱

气候、机械试验及安全状况

Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Sectionalspecification; Climatic, mechanical tests and safety aspects for cabinets and cases17P;A4

IEC 61972-2002 三相笼式感应电动机损耗和效率的测定方法Method for determining losses and efficiency of three-phase cage induction motors39P;A4

IEC 61976-2000核仪器装置.光谱测定法.HPGe核γ射线光谱测定法中光谱

底色的特性

Nuclear instrumentation - Spectrometry - Characterization of the spectrum background in HPGenuclear gamma-ray spectrometry17P;A4

IEC 61977-2001 纤维光学过滤器.总规范Fibre optic filters - Generic specification22P;A4

IEC 61978-1-2000 光纤无源分散补偿器.第1部分:通用规范Fibre optic passive dispersion compensators - Part 1: Generic specification51P;A4

IEC 61982-2-2002电动道路车辆驱动用二次电池.第2部分:动态放电性能试验

和动态耐久试验

Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic dischargeperformance test and dynamic endurance test21P;A4

IEC 61982-3-2001电动道路车辆推进用蓄电池.第3部分:性能和寿命试验(城市

车辆的交通相容性)

Secondary batteries for the propulsion of electric road vehicles - Part 3: Performance and lifetesting (traffic compatible, urban use vehicles)27P;A4

IEC 61984-2001 连接器.安全要求和试验Connectors - Safety requirements and tests75P;A4

（313） 351

IEC标准目录


开本页数

IEC 61986-2002 旋转电机.等效加载和过定位技术.测定温升的直接试验Rotating electrical machines - Equivalent loading and super-position techniques - Indirect testingto determine temperature rise47P;A4

IEC 61988-2-1-2002 等离子体显示板.第2-1部分:光学测量方法Plasma display panels - Part 2-1: Measuring methods, Optical25P;A4

IEC 61988-2-2-2003 等离子体显示板.第2-2部分:光电测量方法Plasma display panels - Part 2-2: Measuring methods; Optoelectrical36P;A4

IEC 61991-2000 铁路设施.铁路车辆.防电气危险的保护装置Railway applications - Rolling stock - Protective provisions against electrical hazards43P;A4

IEC 61992-1-2001 铁路设施.固定装置.直流开关设备.第1部分:总则Railway applications - Fixed installations - DC switchgear - Part 1: General93P;A4

IEC 61992-2-2001 铁路设施.固定装置.直流开关设备.第2部分:断路器Railway applications - Fixed installations; DC switchgear - Part 2: Circuit-breakers53P;A4

IEC 61992-3-2001铁路设施.固定装置.直流开关设备.第3部分:室内断路器和

开关断路器

Railway applications - Fixed installations; DC switchgear - Part 3: Indoor disconnectors andswitch disconnectors43P;A4

IEC 61993-1-1999海上导航与无线电通信设备和系统.第1部分:用超高频

(VHF)数字选择呼叫(DSC)技术的船舶自动转发器系统装

置.操作和性能要求.试验方法和规定的试验结果

Maritime navigation and radiocommunication equipment and systems - Part 1: Shipborneautomatic transponder system installation using VHF digital selective calling (DSC) techniques -Operational and performance requirements, methods of testing and required test results39P;A4

IEC 61993-2-2001海上导航与无线电通信设备和系统.自动识别系统(AIS).第2部分:通用自动识别系统的A级船用设备.操作和性能要求、

试验方法及要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Automatic identificationsystems (AIS) - Part 2: Class A shipborne equipment of the universal automatic identificationsystem (AIS); Operational and performance requirements, methods of test and required testresults

IEC 61996-2000海上导航和无线电通信设备和系统.船载航程数据记录仪.性能要求.试验方法和要求的检验结果

Maritime navigation and radiocommunication equipment and systems - Shipborne voyage datarecorder (VDR) - Performance requirements; methods of testing and required test results42P;A4

IEC 62005-1-2001光纤互连装置和无源部件的可靠性.第1部分:介绍性指南和

定义

Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductoryguide and definitions33P;A4

IEC 62005-2-2001光纤互连装置和无源部件的可靠性.第2部分:基于加速老化

试验的可靠性的定量评定.温度和湿度.稳态

Reliability of fibre optic interconnecting devices and passive components - Part 2: Quantitativeassessment of reliability based on accelerated ageing tests; Temperature and humidity; Steadystate

IEC 62005-3-2001光纤互连装置和无源部件的可靠性.第3部分:无源部件的故

障模式和故障机理评价的相关试验

Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant testsfor evaluating failure modes and failure mechanisms for passive components35P;A4

IEC 62005-4-1999 光纤互连装置和无源光学组件.第4部分:产品屏蔽Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Productscreening9P;A4

（314） 351

IEC标准目录


开本页数

IEC 62007-1 Edition 1.1-1999 光纤系统用半导体光电器件.第1部分:基本额定值及特性.Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essentialratings and characteristics

IEC 62007-1-1999 光纤系统用半导体光电器件.第2部分:基本额定值及特性.Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essentialratings and characteristics

IEC 62007-2 Edition 1.1-1999 光纤系统用半导体光电器件.第2部分:测量方法Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuringmethods

IEC 62007-2-1999 纤维光学系统用半导体光电子器件.第2部分:测量方法Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuringmethods

IEC 62011-1-2002绝缘材料.电气设备用工业刚性模制矩形和六边形横截面的

热固性树脂基薄壁管材和棒材.第1部分:定义,命名和一般要

求

Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular andhexagonal cross-section based on thermosetting resins for electrical purposes - Part 1:Definitions, designations and general requirements19P;A4

IEC 62012-1-2002在条件恶劣环境中数字通信用对绞/星绞多芯和对称电缆.第1部分:总规范

Multicore and symmetrical pair/quad cables for digital communications to be used in harshenvironments - Part 1: Generic specification51P;A4

IEC 62013-1-1999对甲烷敏感的矿中用头灯.第1部分.通用要求.爆炸风险的推

定和检验

Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Constructionand testing in relation to the risk of explosion17P;A4

IEC 62013-2-2000 对沼气敏感的矿工用头灯.第2部分:性能和其它安全相关方

面

Caplights for use in mines susceptible - Part 2: Performance and other safety-related matters12P;A4

IEC 62014-1-2001 电子设计自动化图书馆.第1部分:输入/输出缓冲信息规范Electronic design automation libraries - Part 1: Input/output buffer information specifications(IBIS), (version 3.2)85P;A4

IEC 62019 AMD 1-2002 电气附件.家用断路器和类似设备.辅助接触件.修改件1Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliarycontact units; Amendment 117P;A4

IEC 62019 Edition 1.1-2003 电气附件.家用断路器和类似设备.辅助接触装置Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliarycontact units80P;A4

IEC 62019-1999 电子附件.家用电流断路器和类似设备.辅助接触单元Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliarycontact units67P;A4

IEC 62020-1998 电器附件.家用和类似用途残余电流探测器(RCMs)Electrical accessories - Residual current monitors for household and similar uses (RCMs)173P;A4

IEC 62023-2000 技术信息和文献工作的结构Structuring of technical information and documentation37P;A4

IEC 62024-1-2002高频感应部件.电气特性和测量方法.第1部分:毫微亨(利)瑕庇的感应器

High frequency inductive components - Electrical characteristics and measuring methods - Part1: Nanohenry range chip inductor29P;A4

（315） 351

IEC标准目录


开本页数

IEC 62025-1-2002高频感应部件.非电气特性和测量方法.第1部分:电气和远程

通信设备用固定表面安装的感应器

High frequency inductive components - Non-electrical characteristics and measuring methods -Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment17P;A4

IEC 62026-1-2000 低压控制设备和开关元件.控制装置接口(CDIs).第1部分:一般规则

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: Generalrules

IEC 62026-2-2000低压控制设备和开关元件.控制装置接口(CDIs).第2部分:驱动传感接口(ASI)

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuatorsensor interface (AS-i)169P;A4

IEC 62026-3-2000 低压控制设备和开关元件.控制装置接口(CDIs).第3部分:装置网络

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet294P;A4

IEC 62026-5-2000低压控制设备和开关元件.控制装置接口(CDIs).第5部分:智能分配系统(SDS)

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 5: Smartdistributed system (SDS)121P;A4

IEC 62026-6-2001低压开关设备和控制设备.控制装置接口(CDIs).第6部分:系列多孔控制母线

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 6: Seriplex(Serial Multiplexed Control Bus)81P;A4

IEC 62027-2000 零部件表的准备Preparation of parts lists51P;A4

IEC 62028-2002 数字电视接收机测量的通用方法General methods of measurement for digital television receivers47P;A4

IEC 62035-1999 放电灯(不包括荧光灯).安全规范Discharge lamps (excluding fluorescent lamps) - Safety specifications41P;A4

IEC 62037-1999 射频连接器、连接器电缆部件和电缆.内调水平测量RF connectors, connector cable assemblies and cables - Intermodulation level measurement10P;A4

IEC 62040-1-1-2002不间断电源系统(UPS).第1-1部分:操作人员经过区使用的

UPS的一般和安全要求

Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS usedin operator access areas43P;A4

IEC 62040-1-2-2002不间断电源系统(UPS).第1-2部分:限制通过区使用的不间

断电源系统(UPS)的一般和安全要求

Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS usedin restricted access locations43P;A4

IEC 62040-2-1999 非间断供电系统(UPS).第2部分:电磁兼容性要求(EMC)Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements71P;A4

IEC 62040-3-1999 不间断供电系统(UPS).第3部分:特定性能方法和试验要求Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and testrequirements203P;A4

IEC 62044-1-2002 软磁材料衬芯的测量方法.第1部分:总规范Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification11P;A4

IEC 62044-3-2000软磁性材料制成的磁芯.测量方法.第3部分:高冲击水平的磁

化特性

Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at highexcitation level61P;A4

（316） 351

IEC标准目录


开本页数

IEC 62052-11-2003电测量仪器.一般要求、试验和试验条件.第11部分:测量仪

器

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11:Metering equipment94P;A4

IEC 62053-11-2003电量测量设备(交流电).特殊要求.第11部分:机电电度表

(0,5, 1和2级)

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanicalmeters for active energy (classes 0,5, 1 and 2)38P;A4

IEC 62053-21-2003电量测量设备(交流电).特殊要求.第21部分:静态电度表(1和2级)

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for activeenergy (classes 1 and 2)54P;A4

IEC 62053-22-2003电量测量设备(交流电).特殊要求.第22部分:静态电度表

(0.2S和0.5S级)

Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for activeenergy (classes 0,2 S and 0,5 S)40P;A4

IEC 62053-23-2003电量测量设备(交流电).特殊要求.第22部分:静态乏时计(2和3级)

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactiveenergy (classes 2 and 3)44P;A4

IEC 62053-31-1998交流电度表.特殊要求.第31部分:电机和电子仪表(只有两

线)的脉冲输出装置

Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices forelectromechanical and electronic meters (two wires only)37P;A4

IEC 62053-61-1998 交流电度表.特殊要求.第61部分:动力消耗和电压要求Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption andvoltage requirements9P;A4

IEC 62056-21-2002电度表.电度表读数,价目表和负载控制的数据交换.第21部分:直接地方性数据交换

Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Directlocal data exchange139P;A4

IEC 62056-31-1999电度表.计数器读数、税控制和负载控制的数据交换.第31部分:带有载波信令的双扭线局域网的使用

Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use oflocal area networks on twisted pair with carrier signalling173P;A4

IEC 62056-42-2002电量测量.计数器读数、电费和负载控制的数据交换.第42部分:定向连接异步数据交换的物理层工作和程序

Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physicallayer services and procedures for connection-oriented asynchronous data exchange27P;A4

IEC 62056-46-2002电量测量.计数器读数、电费和负载控制的数据交换.第46部分:使用HDLC协议的数据链路层

Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data linklayer using HDLC protocol69P;A4

IEC 62056-53-2002电量测量.计数器读数、电费和负载控制的数据交换.第53部分:COSEM应用层

Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEMapplication layer123P;A4

IEC 62056-61-2002电量测量.计数器读数、电费和负载控制的数据交换.第61部分:目标识别系统(OBIS)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Objectidentification system (OBIS)25P;A4

（317） 351

IEC标准目录


开本页数

IEC 62056-62-2002电量测量.计数器读数、电费和负载控制的数据交换.第62部分:接口分级

Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interfaceclasses81P;A4

IEC 62065-2002海上导航及无线电通信设备和系统.航线控制系统.操作和

性能要求、试验方法及要求的试验结果

Maritime navigation and radiocommunication equipment and systems - Track control systems -Operational and performance requirements, methods of testing and required test results84P;A4

IEC 62067-2001额定电压为150KV到500KV的挤塑绝缘及其配件的电力电

缆

Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U =170 kV) up to 500 kV (U = 550 kV) - Test methods and requirements79P;A4

IEC 62070-2001 广播数字磁带录像机.录制和/或复制错误情况的识别方法Broadcast digital video tape recorders - Identification method for recording and/or reproductionerror status19P;A4

IEC 62071-2000使用6.35mm的磁带的螺旋扫描压缩数字视频盒式录制系

统.格式D-7Helical-scan compressed digital video cassette recording system using 6,35 mm magnetic tape -Format D-7

IEC 62077-2001 光纤循环器.通用规范Fibre optic circulators - Generic specification53P;A4

IEC 62079-2001 说明书的准备.结构、内容和表示法Preparation of instructions - Structuring, content and presentation97P;A4

IEC 62080-2001 家用和类似用途的声音信号装置Sound signalling devices for household and similar purposes153P;A4

IEC 62081-1999 弧焊接设备.安装和使用Arc welding equipment - Installation and use41P;A4

IEC 62083-2000 医疗电气设备.放射治疗计划系统的安全要求Medical electrical equipment - Requirements for the safety of radiotherapy treatment planningsystems

IEC 62086-1-2001爆炸性气体环境用电气装置.电阻式痕量加热.第1部分:总则

和试验要求

Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1:General and testing requirements49P;A4

IEC 62086-2-2001爆炸性气体环境用电气装置.电阻式痕量加热.第2部分:设计

、安装和维护的应用指南

Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2:Application guide for design, installation and maintenance77P;A4

IEC 62087-2002 声频、视频和相关设备功率消耗量的测量方法Methods of measurement for the power consumption of audio, video and related equipment14P;A4

IEC 62088-2001 核仪器装置.闪烁检测器用光电二极管.试验程序Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures35P;A4

IEC 62089-2001 核仪器仪表.α/β气体正比计数器的校准和使用Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters67P;A4

IEC 62090-2002 使用条形码和二维符号的电子元器件用产品包装标签Product package labels for electronic components using bar code and two-dimensionalsymbologies

（318） 351

IEC标准目录


开本页数

IEC 62092-2001 超声波学.水听器.15MHz-40MHz频率范围内的特性和校准Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHzto 40 MHz52P;A4

IEC 62094-1-2002家用和类似用途的固定电气设施的指示灯部件.第1部分:一般要求

Indicator light units for household and similar fixed-electrical installations - Part 1: Generalrequirements121P;A4

IEC 62099-2001 光纤波长开关.一般规范Fibre optic wavelength switches - Generic specification59P;A4

IEC 62105-1999 数字音频广播(DAB)系统.接收机数据接口(RDI)规范Digital audio broadcast system - Specification of the receiver data interface (RDI)39P;A4

IEC 62106-2000频率范围由87.5-108.0MHz的VHF/FM声音广播用无线电

数据系统(RDS)的规范

Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequencyrange from 87,5 to 108,0 MHz132P;A4

IEC 62107-2000 高级激光视盘.光盘交换系统.规范Super Video Compact Disc - Disc-interchange system-specification51P;A4

IEC 62114-2001 电气绝缘系统(EIS).热度分类Electrical Insulation Systems (EIS) - Thermal classification15P;A4

IEC 62115-2003 电动玩具.安全Electric toys - Safety42P;A4

IEC 62117-1999核反应堆仪器仪表.压水堆(PWR).低温停机过程中堆芯充

分冷却的监测

Nuclear reactor instrumentation - Pressurized light water reactors (PWR) - Monitoring adequatecooling within the core during cold shutdown51P;A4

IEC 62118-2000核反应堆仪器仪表.VVER设计的压水反应堆.在定堆期间监

测堆芯的充分冷却

Nuclear reactor instrumentation - Pressurized water reactor (PWR) of VVER design - Monitoringadequate cooling within the core during shutdown55P;A4

IEC 62121-2001 小型光盘录制/播放测量方法Methods of measurement for minidisc recorders/players81P;A4

IEC 62122-2002 消费者使用的数字VTRs的测量方法.电子和机械性能Methods of measurement for consumer-use digital VTRs - Electronic and mechanicalperformances

IEC 62128-2-2003铁路设施.固定设备.第2部分:由直流牵引系统产生的杂散电

流影响的防护规定

Railway applications - Fixed installations - Part 2: Protective provisions against the effects ofstray currents caused by d.c. traction systems56P;A4

IEC 62133-2002含碱性或其它非酸性电解液的蓄电池和蓄电池组.便携式密

封蓄电池和蓄电池组的安全要求

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safetyrequirements for portable sealed secondary cells, and for batteries made from them, for use inportable applications

IEC 62134-1-2002 光纤附件.第1部分:总规范Fibre optic enclosures - Part 1: Generic specification55P;A4

IEC 62148-10-2003光纤有源元件及器件.包装和接口标准.第10部分:SFF MU双20针无线电收发信机

Fibre optic active components and devices - Package and interface standards - Part 10: SFF MUduplex 20-pin transceivers34P;A4

（319） 351

IEC标准目录


开本页数

IEC 62148-1-2002 光纤有源元件及器件.包装和接口标准.第1部分:总则和指南Fibre optic active components and devices - Package and interface standards - Part 1: Generaland guidance17P;A4

IEC 62148-2-2003光纤有源元件及器件.包装和接口标准.第2部分:SFF MT-RJ 10针无线电收发信机

Fibre optic active components and devices - Package interface standards - Part 2: SFF MT-RJ10-pin transceivers30P;A4

IEC 62148-3-2003光纤有源元件及器件.包装和接口标准.第3部分:SFF MT-RJ 20针无线电收发信机

Fibre optic active components and devices - Package interface standards - Part 3: SFF MT-RJ20-pin transceivers32P;A4

IEC 62148-5-2003光纤有源元件及器件.包装和接口标准.第5部分:SC 1?光纤

模数

Fibre optic active components and devices - Package and interface standards - Part 5: SC 1?fibre optic modules32P;A4

IEC 62148-7-2003光纤有源元件及器件.包装和接口标准.第7部分:SFF LC 10针无线电收发信机

Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC10-pin transceivers32P;A4

IEC 62148-8-2003光纤有源元件及器件.包装和接口标准.第8部分:SFF LC 20针无线电收发信机

Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC20-pin transceivers34P;A4

IEC 62148-9-2003光纤有源元件及器件.包装和接口标准.第9部分:SFF MU双

10针无线电收发信机

Fibre optic active components and devices - Package and interface standards - Part 9: SFF MUduplex 10-pin transceivers32P;A4

IEC 62149-4-2003纤维光学有源元件和器件.性能标准.第4部分:千兆比特以太

网用1300nm纤维光学无线电收发两用机

Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibreoptic transceivers for Gigabit Ethernet application38P;A4

IEC 62151-2000 与电信网络电气相连的设备的安全Safety of equipment electrically connected to a telecommunication network69P;A4

IEC 62156-2001 视频压缩12.56mm型D-9元件格式525/60和625/50的数字

视频录制

Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and625/50 (DIGITAL S)

IEC 62198-2001 项目风险管理.应用导则Project risk management - Application guidelines37P;A4

IEC 62208-2002 低压开关设备和控制设备组件用空外壳.一般要求Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements41P;A4

IEC 62216-1-2001 数字视频广播系统用数字地面接收机.第1部分:基线接收机

规范

Digital terrestrial television receivers for the DVB-T system - Part 1: Baseline receiverspecification

IEC 62219-2002 架空电力导线.带同心绞线的成形导线Overhead electrical conductors - Formed wire, concentric lay, stranded conductors47P;A4

IEC 62246-1-2002 簧片触点.第1部分:总规范Reed contact units - Part 1: Generic specification53P;A4

（320） 351

IEC标准目录


开本页数

IEC 62262-2002 防护外部机械冲击的电气设备外壳的防护等级(IK码)Degrees of protection provided by enclosures for electrical equipment against externalmechanical impacts (IK code)15P;A4

IEC 62271-100 AMD 1-2002高压开关设备和控制设备.第100部分:高压交流断路器.修改

件1

High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-breakers; Amendment 141P;A4

IEC 62271-100-2001 高压开关设备和控制设备.第100部分:高压交流断路器 High-voltage switchgear and controlgear - Part 100: High-voltage alternating-current circuit-

IEC 62271-102-2001高压开关设备和控制设备.第102部分:高压交流断路器和接

地开关

High-voltage switchgear and controlgear - Part 102: High-voltage alternating currentdisconnectors and earthing switches90P;A4

IEC 62271-105-2002 高压开关设备和控制设备.第105部分:交流开关保险丝组合

件

High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations95P;A4

IEC 62271-2-2003高压开关设备和控制设备.第2部分:额定电压72.5kV及以上

的地震特性

High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5kV and above54P;A4

IEC 62278-2002铁路设施.可靠性,有效性,维修性和安全性(RAMS)的规范和

论证

Railway applications - Specification and demonstration of reliability, availability, maintainabilityand safety (RAMS)159P;A4

IEC 62279-2002铁路设施.通信,信号和处理系统.铁路控制和保护系统用软

件

Railway applications - Communications, signalling and processing systems - Software for railwaycontrol and protection systems219P;A4

IEC 62280-1-2002铁路设施.通信、信号和处理系统.第1部分:在封闭的传输系

统中有关通信安全

Railway applications - Communication, signalling and processing systems - Part 1: Safety-relatedcommunication in closed transmission systems33P;A4

IEC 62280-2-2002铁路设施.通信、信号和处理系统.第2部分:在开放的传输系

统中有关通信安全

Railway applications - Communication, signalling and processing systems - Part 2: Safety-relatedcommunication in open transmission systems97P;A4

IEC 62289-2002视频记录.使用12,65mm 磁带和混合MPEG-2的螺旋式扫

描数字视频卡式录音带的录制格式.D-10格式

Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetictape and incorporating MPEG-2 compression - Format D-10102P;A4

IEC 62326-1-2002 印制电路板.第1部分:总规范Printed boards - Part 1: Generic specification103P;A4

IEC 62326-4-1-1996印制板.第4部分:层连接的刚性多层印制板.分规范.第1节:性能详细规范.性能水平A、B和C

Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectionalspecification - Section 1: Capability detail specification - Performance levels A, B and C127P;A4

IEC 62326-4-1996印制电路板.第4部分:有扁导线的硬质多层印制电路板分规

范

Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectionalspecification75P;A4

IEC 80416-1-2001 设备上图形符号的基本原则.第1部分:符号原型创建Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals31P;A4

（321） 351

IEC标准目录


开本页数

IEC 80416-3-2002用在设备上的图形符号的基本原则.第3部分:图形符号使用

导则

Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for theapplication of graphical symbols23P;A4

IEC 81714-2-1998产品技术文件用图形符号的设计.第2部分:计算机适用的图

形符号,包括相关目录图形符号和内部交换要求的规范

Design of graphical symbols for use in the technical documentation of products - Part 2:Specification for graphical symbols in a computer sensible form, including graphical symbols for areference library, and requirements for their interchange148P;A4

IEC 81714-3-1998产品技术文件用图形符号的设计.第3部分:连接节点、网络

及其编码的分类

Design of graphical symbols for use in the technical documentation of products - Part 3:Classification of connect nodes, networks and their encoding17P;A4

IEC 82045-1-2001 文件管理.第1部分:原则和方法Document management - Part 1: Principles and methods67P;A4

IEC Guide 107-1998 电磁兼容性.电磁兼容性出版物编写指南Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications37P;A4

IEC Guide 108-1994 横向技术委员会和产品委员会与使用基础出版物之间的关系

The relationship between technical committees with horizontal functions and product committeesand the use of basic publications13P;A4

IEC Guide 110-1996 家政管理系统.有关安全导则Home control systems - Guidelines relating to safety21P;A4

IEC WT 01-2001 风力涡轮机的合格试验和认证的IEC系统.规则和程序IEC system for conformity testing and certification of wind turbines - Rules and procedures52P;A4

IEC/PAS 60044-5-2002 仪表用变压器.第5部分:电容器电压变压器Instrument transformers - Part 5: Capacitor voltage transformers63P;A4

IEC/PAS 60793-1-49-2002 光纤.第1-49部分:测量方法和使用程序.差动式延迟Optical fibres - Part 1-49: Measurement methods and test procedures; Differential mode delay16P;A4

IEC/PAS 61076-3-104-2002电子设备用连接器.第3-104部分:频率低为600MHz的数

据传输用8频道,有屏蔽,松散的和固定连接器的详细规范

Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded freeand fixed connectors for data transmissions with frequencies up to 600 MHz minimum77P;A4

IEC/PAS 61076-3-109-2001电子设备用连接器.第3-109部分:在要求苛刻环境下高速数

据使用的两件式缆绳于印制板的连接器的详细规范.保护率

IP67按IEC60529

Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to boardconnector for high speed data application in a harsh industrial environment; Protection rate IP67according to IEC 6052962P;A4

IEC/PAS 61076-3-110-2002电子设备用连接器.第3-110部分:频率在600MHz以下的8位连接器的详细规范

Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors forfrequencies up to 600 MHz76P;A4

IEC/PAS 61076-3-111-2002电子设备用连接器.第3-111部分:工业环境高频率为

250Hz的8频道,有屏蔽和无屏蔽的,松散的和固定连接器的

详细规范

Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded andunshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz35P;A4

（322） 351

IEC标准目录


开本页数

IEC/PAS 61162-100-2002海上导航和无线电通信设备及系统的数字接口.第100部分:单人讲话和多人收听.UAIS用IEC 61162-1的额外要求

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part100: Single talker and multiple listeners; Extra requirements to IEC 61162-1 for the UAIS35P;A4

IEC/PAS 61280-2-10-2003纤维光学通信子系统试验程序.第2-10部分: 数字系统.激光

发射机的时间分辨线性调频脉冲和α因数测量

Fibre optic communication subsystem test procedures - Part 2-10: Digital systems; Time-resolved chirp and alpha-factor measurement of laser transmitters24P;A4

IEC/PAS 61290-3-1-2002 光纤放大器基本规范.第3-1部分:噪音计算参数.光谱分解器Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters;Optical spectrum analyzer17P;A4

IEC/PAS 61300-3-29-2002纤维光学互连器件和无源元件.基本试验和测量程序.第3-29部分:检查和测量.表征DWDM元件的光谱传输功能振幅

的测量技术

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-29: Examinations and measurements; Measurement techniques forcharacterizing the amplitude of the spectral transfer function of DWDM components28P;A4

IEC/PAS 61300-3-35-2002光纤互连器件和无源部件.基本试验和测量程序.第3-35部分:检验和测量.光纤园柱状连接器端面视频检验.

Fibre optic interconnecting devices and passive components - Basic test and measurementprocedures - Part 3-35: Examinations and measurements; Fibre optic cylindrical connectorendface visual inspection11P;A4

IEC/PAS 61499-1 Edition 1.0- 工业流程测量和控制系统的功能区.第1部分:建筑 Function blocks for industrial-process measurement and control systems - Part 1: Architecture

IEC/PAS 61499-1-2000 工业过程测量和控制系统用功能块.第1部分:建筑 Function blocks for industrial-process measurement and control systems - Part 1: Architecture

IEC/PAS 61499-4-2002工业过程测量和控制系统用功能器件.第4部分:符合标杆规

则

Function blocks for industrial-process measurement and control systems - Part 4: Rules forcompliance profiles9P;A4

IEC/PAS 61804-1-2002 加工控制用器件功能.第1部分:系统外观纵缆Function blocks (FB) for process control - Part 1: Overview of system aspects123P;A4

IEC/PAS 61804-2-2002 加工控制用器件功能.第2部分:器件功能的概念和电子器件

的叙述语言

Function blocks (FB) for process control - Part 2: Specification of FB concept and electronicdevice description language (EDDL)

IEC/PAS 61987-1-2002工业过程测量和控制.加工设备目录中数据结构和原则.第1部分:具有模拟和数字输出的测量设备

Industrial-process measurement and control - Data structures and elements in processequipment catalogues - Part 1: Measuring equipment with analogue and digital output62P;A4

IEC/PAS 62084-1998 叩焊晶片和晶片标度技术的执行Implementation of Flip Chip and Chip Scale technology105P;A4

IEC/PAS 62085-1998 球形格栅排列和其它高密度技术的执行Implementation of Ball Grid Array and other High Density technology88P;A4

IEC/PAS 62111-1999 在农村局部发电区域可换能量的使用规范 Specifications for the use of renewable energies in rural decentralised electrification

IEC/PAS 62119 Edition 1.0-1999 产品制造描述数据和传递法实施的总要求

Generic requirements for implementation of product manufacturing description data and transfermethodology148P;A4

IEC/PAS 62119-1999 产品生产描述数据和传送方法实现的一般要求

Generic requirements for implementation of product manufacturing description data and transfermethodology148P;A4

（323） 351

IEC标准目录


开本页数

IEC/PAS 62123 Edition 1.0-1999

性能指南.单双面可弯曲的印制导线板手册Performance guide - Manual for single- and double-sided flexible printed wiring boards92P;A4

IEC/PAS 62123-1999 性能导则.单面和双面挠性印制线路板手册Performance guide - Manual for single- and double-sided flexible printed wiring boards92P;A4

IEC/PAS 62158 Edition 1.0- 印制电路板生产商资格证明纲要 Printed Board Manufacturers` Qualification Profile (MQP)

IEC/PAS 62158-2000 印制板制造商的资格纲要(MQP) Printed Board Manufacturers` Qualification Profile (MQP)

IEC/PAS 62159 Edition 1.0- 电子配件生产商资格证明纲要 Electronic Assembly Manufacturers` Qualification Profile (AQP)

IEC/PAS 62159-2000 电子组件制造商的资格纲要(MQP) Electronic Assembly Manufacturers` Qualification Profile (AQP)

IEC/PAS 62160 Edition 1.0- 层合机资格证明纲要 Laminator Qualification Profile

IEC/PAS 62160-2000 层压机合格性纲要 Laminator Qualification Profile

IEC/PAS 62161 Edition 1.0- 稳定状态温度湿度对寿命影响的试验 Steady state temperature humidity bias life test

IEC/PAS 62162 Edition 1.0-2000

微电子元件抗静电放电域值的场诱导放电装置模型的试验方法

Filed-induced charged-device model test method for electrostatic discharge withstand thresholdsof microelectronic components

IEC/PAS 62162-2000 微电子元件静电放电容许阈的场感应带电设备模型试验方法

Filed-induced charged-device model test method for electrostatic discharge withstand thresholdsof microelectronic components

IEC/PAS 62163 Edition 1.0- 外观检查试验方法 External visual test method

IEC/PAS 62164 Edition 1.0- GaAs MMIC和FET寿命试验的指南 Guidelines for GaAs MMIC and FET life testing

IEC/PAS 62164-2000 GaAs MMIC和FET寿命试验导则 Guidelines for GaAs MMIC and FET life testing

IEC/PAS 62165 Edition 1.0- GaAs FETs的耐热性测量的指南 Guidelines for the measurement of thermal resistance of GaAs FETs

IEC/PAS 62165-2000 GaAs FETs的热阻测量导则 Guidelines for the measurement of thermal resistance of GaAs FETs

IEC/PAS 62166 Edition 1.0- 由半导体供货商提供的产品/工艺更换的使用者注意指南 Guidelines for user notification of product/process changes by semiconductor suppliers

IEC/PAS 62166-2000 由半导体供应商对用户提供的产品/工艺改变通告指南 Guidelines for user notification of product/process changes by semiconductor suppliers

IEC/PAS 62167 Edition 1.0- 产品不连续性 Product discontinuance

IEC/PAS 62167-2000 产品不连续性 Product discontinuance

IEC/PAS 62168 Edition 1.0- 潮湿敏感装置的标签和符号 Symbol and labels for moisture-sensitive devices

IEC/PAS 62168-2000 湿敏器件用符号和标签 Symbol and labels for moisture-sensitive devices

IEC/PAS 62169 Edition 1.0- 处理、包装、船用和潮湿/回流敏感表面固定装置的标准 Standard for handling, packing, shipping and use of moisture/reflow sensitive surface mount

IEC/PAS 62169-2000 表面安装的湿度/反流敏感设备的搬运、包装、船运和使用 Standard for handling, packing, shipping and use of moisture/reflow sensitive surface mount

IEC/PAS 62170 Edition 1.0- 粘合线模式化标准 Bond wire modeling standard

IEC/PAS 62170-2000 焊线模拟标准 Bond wire modeling standard

IEC/PAS 62171 Edition 1.0- 微粒冲击噪音检测(PIND)试验、操作者培训和认证指南 Guidelines for particle impact noise detection (PIND) testing, operator training and certification

IEC/PAS 62172 Edition 1.0- 加速抗潮性.非偏离的高压灭菌器 Accelerated moisture resistance - Unbiased autoclave

IEC/PAS 62172-2000 加速抗湿.无偏压热器法 Accelerated moisture resistance - Unbiased autoclave

IEC/PAS 62173 Edition 1.0- 可钎焊性的试验方法 Solderability test method

IEC/PAS 62173-2000 软钎焊性试验方法 Solderability test method

IEC/PAS 62174 Edition 1.0- 通孔固定装置的焊接温度抗性 Resistance to soldering temperature for through-hole mounted devices

（324） 351

IEC标准目录


开本页数

IEC/PAS 62174-2000 通孔安装设备的耐钎焊温度 Resistance to soldering temperature for through-hole mounted devices

IEC/PAS 62175 Edition 1.0- 标记持久性试验方法 Marking permanency test method

IEC/PAS 62177 Edition 1.0- 高速加温和加湿的应力试验(HAST) Highly-accelerated temperature and humidity stress test (HAST)

IEC/PAS 62178 Edition 1.0- 温度循环 Temperature cycling

IEC/PAS 62178-2000 温度周期变化 Temperature cycling

IEC/PAS 62179 Edition 1.0- 静电放电(ESD)感应试验人体模型(HBM) Electrostatic discharge (ESD) sensitive testing human body model (HBM)

IEC/PAS 62179-2000 静电放电(ESD)敏感试验人体模型(HBM) Electrostatic discharge (ESD) sensitive testing human body model (HBM)

IEC/PAS 62180 Edition 1.0- 静电放电(ESD)感应试验机器模型(HBM) Electrostatic discharge (ESD) sensitive testing machine model (MM)

IEC/PAS 62180-2000 静电放电(ESD)敏感试验机械模型(MM) Electrostatic discharge (ESD) sensitive testing machine model (MM)

IEC/PAS 62181-2000 IC锁定试验IC latch-up test15P;A4

IEC/PAS 62182 Edition 1.0- 可靠度检验之前的不密闭的表面安装器件的预处理 Preconditioning of nonhermetic surface mount devices prior to reliability testing

IEC/PAS 62182-2000 可靠性试验之前不密闭表面安装设备的预调节 Preconditioning of nonhermetic surface mount devices prior to reliability testing

IEC/PAS 62183 Edition 1.0- 盐雾 Salt atmosphere

IEC/PAS 62184 Edition 1.0- 铅完整性的试验方法 Lead integrity test method

IEC/PAS 62184-2000 铅完整性试验方法 Lead integrity test method

IEC/PAS 62185 Edition 1.0- 热冲击试验方法 Thermal shock test method

IEC/PAS 62186 Edition 1.0- 机械冲击试验方法 Mechanical shock test method

IEC/PAS 62187 Edition 1.0- 可变频率的振动试验方法 Variable frequency vibration test method

IEC/PAS 62189-2000 偏压寿命Bias life7P;A4

IEC/PAS 62206-2000 动力和温度周期变化Power and temperature cycling6P;A4

IEC/PAS 62212-2001 非编织的"E"形玻璃纤维板的规范和特性方法Specification and characterization methods for nonwoven "E" glass mat10P;A4

IEC/PAS 62213-2001 非纺织的间芳族增强的规范和特性法Specification and characterization methods for nonwoven para-aramid reinforcement11P;A4

IEC/PAS 62214-2001 印制板的通用性能规范Generic performance specification for printed boards10P;A4

IEC/PAS 62239-2001 电子元件管理规划Electronic component management plans18P;A4

IEC/PAS 62240-2001 生产商规定温度范围以外的半导体器件的使用Use of semiconductor devices outside manufacturers` specified temperature ranges51P;A4

IEC/PAS 62249-2001 柔性印制板的合格鉴定和性能规范Qualification and performance specification for flexible printed boards86P;A4

IEC/PAS 62250-2001 刚性印制板的合格鉴定和性能规范Qualification and performance specification for rigid printed boards27P;A4

（325） 351

IEC标准目录


开本页数

IEC/PAS 62255-1-2001 高比特率数字接入电信网络用多对电缆.第1部分:户外电缆Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1:Outdoor cables11P;A4

IEC/PAS 62260-2001 用反离散傅里叶变换法测定频域中脉冲/阶跃回程损耗Pulse/step return loss from measurement in the frequency domain using the Inverse DiscreteFourier Transformation (IDFT)6P;A4

IEC/PAS 62261-2001 电视.元数据字典结构Television - Metadata dictionary structure92P;A4

IEC/PAS 62271-109-2002高压开关装置和控制装置.第109部分:交流电流系列电容器

迂回开关设备

High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-passswitches92P;A4

IEC/PAS 62272-1-2002数字无线电全球化.广播频带低于30HZ的数字传输用系统

规范

Digital Radio Mondiale (DRM) - System specification for digital transmissions in the broadcastingbands below 30 MHz158P;A4

IEC/PAS 62276-2001 表面声波装置用单晶薄片.规范和测量方法Single crystal wafers applied for surface acoustic wave device - Specification and measuringmethod

IEC/PAS 62277-2001 表面安装石英晶体元件的试验台Test-fixture of surface mounting quartz crystal units5P;A4

IEC/PAS 62292-2001 SMPTE工程导则草案SMPTE XXX.描述数据要素Draft SMPTE Engineering Guideline SMPTE XXX - Declarative Data Essence113P;A4

IEC/PAS 62293-2001 高密度互连层或板的合格鉴定和性能规范Qualification and performance specification for high density interconnect (HDI) layers or boards57P;A4

IEC/PAS 62297-2002 在TV传输中引进触发机构的建议Proposal for introducing a trigger mechanism into TV transmissions32P;A4

IEC/PAS 62298-2002 远程.应用范围.参考译码器TeleWeb - Application Profile 1 - Reference decoder149P;A4

IEC/PAS 62307-2002 集成电路用有机物质中潮气弥漫性和水溶解度测量的试验方法

Test method for the measurement of moisture diffusivity and water solubility in organic materialsused in integrated circuits9P;A4

IEC/PAS 62323-2002 感应近接开关用磁氧化物的半壶形磁铁芯的尺寸Dimensions of half pot cores made of magnetic oxides for inductive proximity switches5P;A4

IEC/PAS 62336-2002 加速耐湿.无偏差的HASTAccelerated moisture resistance - Unbiased HAST7P;A4

IEC/PAS 62337-2002 加工工业中电子仪器仪表和控制系统在交付使用中的里程碑和活动

Milestones and activities during commissioning of electrical instrumentation and control systemsin the process industry34P;A4

IEC/PAS 62338-2002 屏蔽对称电缆.用三线法连接衰减测量Screened balanced cables - Coupling attenuation measurement, triaxial method14P;A4

（326） 351

IEC标准目录


开本页数

IEC/TR 60079-12-1978防爆电气设备.第12部分:气体与空气或蒸汽与空气的混合

物按其大试验安全间隙和小点燃电流的分类

Electrical apparatus for explosive gas atmospheres. Part 12 : Classification of mixtures of gasesor vapours with air according to their maximum experimental safe gaps and minimum ignitingcurrents

IEC/TR 60079-13-1982防爆电气设备.第13部分:加压保护的房间或建筑物的结构

和使用

Electrical apparatus for explosive gas atmospheres. Part 13 : Construction and use of rooms orbuildings protected by pressurization17P;A4

IEC/TR 60079-16-1990 防爆电气设备.第16部分:分析仪器罩防护用的人工装置Electrical apparatus for explosive gas atmospheres; part 16: artificial ventilation for the protectionof analyzer(s) houses41P;A4

IEC/TR 60099-3-1990 电涌放电器.第3部分:避雷器的人工污染试验Surge arresters; part 3: artificial pollution testing of surge arresters23P;A4

IEC/TR 60118-8-1983助听器.第8部分:在模拟现场工作条件下助听器工作特性的

测量方法

Hearing aids. Part 8 : Methods of measurement of performance characteristics of hearing aidsunder simulated in situ working conditions39P;A4

IEC/TR 60279-1969 交流电机在交流电压运行期间绕组电阻的测量Measurement of the winding resistance of an a.c. machine during operation at alternating voltage22P;A4

IEC/TR 60283-1968 滤波器晶体单元的无用谐振频率和等效电阻的测量方法

Methods for the measurement of frequency and equivalent resistance of unwanted resonances offilter crystal units23P;A4

IEC/TR 60321-1970 供安装在印制线路和印制电路板上用的元件的设计和使用指南

Guidance for the design and use of components intended for mounting on boards with printedwiring and printed circuits39P;A4

IEC/TR 60355-1971 大气腐蚀加速试验问题评定An appraisal of the problems of accelerated testing for atmospheric corrosion21P;A4

IEC/TR 60438-1973 高压直流绝缘子的试验和尺寸Test and dimensions for high-voltage d.c. insulators13P;A4

IEC/TR 60440-1973 电阻器非线性的测量方法Method of measurement of non-linearity in resistors16P;A4

IEC/TR 60444-3-1986在π型网络中用零相位技术测量石英晶体单元参数.第3部分:在具有并联电容C补偿的w型网络中用相位技术测量频

率200MHz及以下石英晶体单元的二端参数的基本方法

Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 3:basic method for the measurement of two-terminal parameters of quartz crystal units up to 200MHz by phase technique in a w-network with compensation of the parallel capacitance C33P;A4

IEC/TR 60479-2-1987通过人体的电流的效应.第2部分:特殊信号形式.第4章:频率

在100Hz以上的交流电的效应.第5章:特殊波形电流的效应.第6章:短时间单向脉冲电流效应

Effects of current passing through the human body. Part 2 : Special aspects. Chapter 4: Effectsof alternating current with frequencies above 100 Hz. Chapter 5: Effects of special waveforms ofcurrent. Chapter 6: Effects of unidirectional single impulse currents of short duration

IEC/TR 60518-1975 高压开关设备和控制设备接线端子尺寸的标准化Dimensional standardization of terminals for high-voltage switchgear and controlgear3P;A4

IEC/TR 60575-1977 绝缘子串元件的热-机械性能试验和机械性能试验Thermal-mechanical performance test and mechanical performance test on string insulator units51P;A4

（327） 351

IEC标准目录


开本页数

IEC/TR 60616-1978 电力变压器端子和分接标志Terminal and tapping markings for power transformers16P;A4

IEC/TR 60629-1978 家用和类似装置安装附件用模数系统活页标准

Standard sheets for a modular system (for installation accessories for use in domestic and similarinstallations)6P;A4

IEC/TR 60638-1979 牵引用旋转电机换向的评定和确定等级准则Criteria for assessing and coding of the commutation of rotating electrical machines for traction31P;A4

IEC/TR 60648-1979 电气绝缘用塑料薄膜和片材摩擦系数的测试方法Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation18P;A4

IEC/TR 60649-1979 户内装置用电缆大外径的计算Calculation of maximum external diameter of cables for indoor installations15P;A4

IEC/TR 60657-1979 频率范围为10MHz-300,000MHz的非电离的辐射危险Non-ionizing radiation hazards in the frequency range from 1O MHz to 300 000 MHz19P;A4

IEC/TR 60664-2-2-2002低压系统内设备的绝缘配合.第2-2部分:界面问题.应用导

则.

Insulation coordination for equipment within low-voltage systems - Part 2-2: Interfaceconsiderations; Application guide12P;A4

IEC/TR 60668-1980 盘装和架装工业过程测量和控制仪器的盘面和开孔尺寸

Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-processmeasurement and control instruments15P;A4

IEC/TR 60695-11-30-2001 着火危险试验.第11-30部分:试验火焰.1979-1999年的历史

和发展

Fire hazard testing - Part 11-30: Test flames; History and development 1979 to 199967P;A4

IEC/TR 60695-7-2-2002 着火危险试验.第7-2部分:火焰放出物的毒性.试验方法的摘

要和关联词

Fire hazard testing - Part 7-2: Toxicity of fire effluent; Summary and relevance of test methods69P;A4

IEC/TR 60721-4-0-2002环境条件分类.第4-0部分:从IEC 60721-3的环境条件等级

转换到IEC 60068环境条件试验及其相互关系的指南

Classification of environmental conditions - Part 4-0: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Introduction

IEC/TR 60721-4-1-2001环境条件分类.第4-1部分:IEC 60721-3的环境条件等级与

IEC 60068的环境试验相关和转换的指南.储存

Classification of environmental conditions - Part 4-1: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Storage


IEC 60068的环境试验相关和转换的指南.传送

Classification of environmental conditions - Part 4-2: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Transportation45P;A4


IEC 60068的环境试验相关和转换的指南.在有气候防护系

统的区域的固定使用

Classification of environmental conditions - Part 4-3: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Stationary use at weatherprotected locations45P;A4

（328） 351

IEC标准目录


开本页数


IEC 60068的环境试验相关和转换的指南.在无气候防护系

统的区域的固定使用

Classification of environmental conditions - Part 4-4: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Stationary use at non-weatherprotected locations49P;A4


IEC 60068的环境试验相关和转换的指南.地面车辆装置

Classification of environmental conditions - Part 4-5: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Ground vehicle installations37P;A4


IEC 60068的环境试验相关和转换的指南.航运环境

Classification of environmental conditions - Part 4-6: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Ship environment47P;A4


IEC 60068的环境试验相关和转换的指南.便携式和非固定

使用

Classification of environmental conditions - Part 4-7: Guidance for the correlation andtransformation of environmental condition classes of IEC 60721-3 to the environmental tests ofIEC 60068; Portable and non-stationary use61P;A4

IEC/TR 60727-1-1982电气绝缘系统电气耐久性的评定.第1部分:基于标准分布的

评定规程和总条件

Evaluation of electrical endurance of electrical insulation systems. Part 1 : Generalconsiderations and evaluation procedures based on normal distributions31P;A4

IEC/TR 60771-1983 电缆大总直径的计算以及带聚烯烃防潮层护套的聚烯烃绝缘和低频电缆的悬挂绞线的小抗拉强度的规范

Calculation of maximum overall diameter of cables and specification of minimum tensile strengthof suspension strand for low-frequency cables with polyolefin insulation and moisturebarrierpolyolefin sheath9P;A4

IEC/TR 60778-1984 滑环用刷握.R系列-RA型Brush-holders for slip-rings group R - type RA21P;A4

IEC/TR 60782-1984 超声波磁致伸缩变换器的测量Measurements of ultrasonic magnetostrictive transducers54P;A4

IEC/TR 60783-1984 电气道路车辆的配线和连接器Wiring and connectors for electric road vehicles19P;A4

IEC/TR 60784-1984 电气道路车辆用仪器Instrumentation for electric road vehicles13P;A4

IEC/TR 60785-1984 电气道路车辆用旋转电机Rotating machines for electric road vehicles17P;A4

IEC/TR 60786-1984 电气道路车辆用控制器Controllers for electric road vehicles27P;A4

IEC/TR 60791-1984 基于运行经验和功能试验的绝缘系统的性能评定Performance evaluation of insulation systems based on service experience and functional tests17P;A4

IEC/TR 60792-1-1985 电绝缘系统的多因数功能试验.第1部分:试验规程The multi-factor functional testing of electrical insulation systems. Part 1 : Test procedures31P;A4

（329） 351

IEC标准目录


开本页数

IEC/TR 60797-1984 架空线路用玻璃或陶瓷材料绝缘子串元件在电介质受到机械损伤后的剩余强度

Residual strength of string insulator units of glass or ceramic material for overhead lines aftermechanical damage of the dielectric.15P;A4

IEC/TR 60815-1986 关于污染条件的绝缘子选择导则Guide for the selection of insulators in respect of polluted conditions39P;A4

IEC/TR 60825-10-2002 激光制品的安全性.第10部分:IEC 60825-1的应用导则和注

释

Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-137P;A4

IEC/TR 60825-5-1998 激光制品的安全性.第5部分:制造商用IEC 60825的检验单Safety of laser products - Part 5: Manufacturer`s checklist for IEC 60825-119P;A4

IEC/TR 60825-8-1999 激光制品的安全性.第8部分:医疗激光设备安全使用指南Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment40P;A4

IEC/TR 60825-9-1999 激光产品安全.第9部分: 大允许非相干光辐照的汇集Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherentoptical radiation49P;A4

IEC/TR 60826-1991 架空输电线的载荷和强度Loading and strength of overhead transmission lines227P;A4

IEC/TR 60854-1986 超声波脉冲回波诊断设备性能的测定方法Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment47P;A4

IEC/TR 60870-1-1-1988 遥控设备和系统.第1部分:概论.第1节:总则 Telecontrol equipment and systems. Part 1: General considerations. Section One - General

IEC/TR 60870-1-5-2000远程控制设备和系统.第1-5部分:概论.带有扰码器的调制解

调器传输程序对使用协议IEC 60870-5的传输系统的数据

完整性的影响

Telecontrol equipment and systems - Part 1-5: General considerations; Influence of modemtransmission procedures with scramblers on the data integrity of transmission systems using theprotocol IEC 60870-5

IEC/TR 60870-6-505-2002远动设备和系统.第6-505部分:与ISO标准和ITU-T建议兼容

的远动协议.TASE.2用户指南

Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations; TASE.2 User guide60P;A4

IEC/TR 60882-1986 对无启动器的管形荧光灯的预热要求 Pre-heat requirements for starterless tubular fluorescent lamps

IEC/TR 60886-1987 超声滤清器的试验方法研究Investigations on test procedures for ultrasonic cleaners13P;A4

IEC/TR 60887-1988 灯用玻璃泡命名体系Glass bulb designation system for lamps16P;A4

IEC/TR 60893-4-2003绝缘材料.电工用热固性树脂基绝缘刚性层压薄板.第4部分:代表值

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electricalpurposes - Part 4: Typical values38P;A4

IEC/TR 60899-1987 专业数字录音的采样率和声源编码Sampling rate and source encoding for professional digital audio recording5P;A4

IEC/TR 60902-1987 工业过程测量和控制.术语和定义 Industrial-process measurement and control - Terms and definitions.

IEC/TR 60907-1989 局域网CSMA/CD 10 Mbits基本频带.设计和安装指南Local area networks CSMA/CD 10 Mbit/s baseband; planning and installation guide83P;A4

（330） 351

IEC标准目录


开本页数

IEC/TR 60909-1-2002三相交流电系统中的短路电流.第1部分:根据IEC 60909-0的短路电流计算系数

Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0161P;A4

IEC/TR 60909-4-2000 三相交流系统的短路电流.第4部分:短路电流的计算实例Short-circuit currents in three-phase a.c. systems - Part 4: Examples for the calculation of short-circuit currents131P;A4

IEC/TR 60919-1-1988 高压直流输电系统性能.第1部分:稳态条件Performance of high-voltage d.c. (HVDC) systems; part 1: steady-state conditions127P;A4

IEC/TR 60919-2-1991 高压直流(HVDC)系统性能.第2部分:故障和跳闸Performance of high-voltage d.c. (HVDC) systems; part 2: faults and switching157P;A4

IEC/TR 60932-1988用于严酷气候条件下1KV到72·5KV的封闭式开关装置和控

制器的附加要求

Additional requirements for enclosed switchgear and controlgear from 1 kV to 72,5 kV to be usedin severe climatic conditions39P;A4

IEC/TR 60941-1988 电气绝缘装置用的机械疲劳强度函数试验Mechanical endurance functional tests for electrical insulation systems21P;A4

IEC/TR 60943-1998 终端用特定电气设备部件允许温升相关指南

Guidance concerning the permissible temperature rise for parts of electrical equipment, inparticular for terminals117P;A4

IEC/TR 60959-1990 空气传导助听器声学测量用临时头戴筒式模拟器Provisional head and torso simulator for acoustic measurements on air conduction hearing aids56P;A4

IEC/TR 60971-1989 半导体变流器.变流器连接用识别码Semiconductor convertors; identification code for convertor connections49P;A4

IEC/TR 60972 AMD 1-1991 新型照明产品的分类和说明.修改件1Classification and interpretation of new lighting products; amendment 13P;A4

IEC/TR 60972-1989 新式照明产品的分类和说明Classification and interpretation of new lighting products15P;A4

IEC/TR 60977 AMD 1-2000医疗电气设备.在1-50MeV范围内的医疗用电子加速器.功能特性指南.修改件1

Medical electrical equipment - Medical electron accelerators in the range 1 MeV to 50 MeV -Guidelines for functional performance characteristics; Amendment 119P;A4

IEC/TR 60977-1989医疗电气设备.在1-50MeV范围内的医疗用电子加速器.功能特性指南

Medical electrical equipment; medical electron accelerators in the range 1 MeV to 50 MeV;guidelines for functional performance characteristics109P;A4

IEC/TR 61000-1-3-2002电磁兼容性(EMC).第1-3部分:在民用设备和系统上(宇宙射

线强度的)高程电磁脉冲EMP(HEMP)效应总则

Electromagnetic compatibility (EMC) - Part 1-3: General; The effects of high-altitude EMP(HEMP) on civil equipment and systems46P;A4

IEC/TR 61000-2-7-1998电磁兼容性(EMC).第2部分:环境.第7节:在各种环境下的低

频磁场

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magneticfields in various environments69P;A4

（331） 351

IEC标准目录


开本页数

IEC/TR 61000-2-8-2002电磁兼容性(EMC).第2-8部分:环境.有统计测量结果的公共

电力供应系统的电压骤降和短时干扰

Electromagnetic compatibility (EMC) - Part 2-8: Environment; Voltage dips and short interruptionson public electric power supply systems with statistical measurement results89P;A4

IEC/TR 61000-5-3-1999电磁兼容性(EMC).第5-3部分:安装和调节指南.HEMP保护

概念

Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMPprotection concepts81P;A4

IEC/TR 61000-5-6-2002电磁兼容性(EMC).第5-6部分:安装和调节导则.外部电磁感

应的调节

Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines; Mitigationof external EM influences45P;A4

IEC/TR 61010-3-020-1999测量,控制和试验室用的电气设备的安全要求.第3-020部分:试验室离心机的特殊要求.与IEC61010-2-020:1992标准规

定的合格鉴定报告

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-020: Conformity verification report for IEC 61010-2-020:1992 - Particular requirements forlaboratory centrifuges70P;A4

IEC/TR 61010-3-032-2000测量、控制和实验室用电气设备的安全要求.第3-032部分:IEC 61010-2-032-1994的一致性检验报告.电气测量和

试验用手持式电流钳的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-032: Conformity verification report for IEC 61010-2-032:1994 - Particular requirements forhand-held current clamps for electrical measurement and test42P;A4

IEC/TR 61010-3-041-1999测量、控制及实验室用电气设备的安全要求.第3-041部分:IEC 61010-2-041:1995合格鉴定报告.医疗材料处理和

实验室操作用高压蒸汽灭菌器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-041: Conformity verification report for IEC 61010-2-041:1995 - Particular requirements forautoclaves using steam for the treatment of medical materials, and for laboratory processes65P;A4


实验室操作用毒气高压灭菌器和消毒器的特殊要求

68P;A4


实验室操作用热气体或热惰性气体干热消毒器的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-043: Conformity verification report for IEC 61010-2-043:1997; Particular requirements for dryheat sterilizers using either hot air or hot inert gas for the treatment of medical materials and forlaboratory processes

IEC/TR 61015-1990 电机用刷握.作用于电刷的静推力的测量指南Brush-holders for electrical machines; guide to the measurement of the static thrust applied tobrushes13P;A4

IEC/TR 61022-1989 无线电接收机和电视接收机与天线系统插口的连接Interconnection of radio and TV receivers to feeder system outlets8P;A4

IEC/TR 61026-1991 电气绝缘材料的耐热测试的分析试验方法实用导则

Guidelines for application of analytical test methods for thermal endurance testing of electricalinsulating materials61P;A4

IEC/TR 61044-2002 牵引用铅酸蓄电池组的利用机会充电Opportunity charging of lead-acid traction batteries21P;A4

（332） 351

IEC标准目录


开本页数

IEC/TR 61055-1-1991广播磁带录象机的操作调节和测量技术.第1部分:模似复合

广播磁录象机上操作调节

Measurement techniques and operational adjustments of broadcast VTRs; part 1: operationaladjustments on analogue composite broadcast VTRs63P;A4

IEC/TR 61055-2-1991广播磁带录象机的操作调节和测量技术.第2部分:专业机械

测量和校整

Measurement techniques and operational adjustments of broadcast VTRs; part 2: specialmechanical measurements and alignments33P;A4

IEC/TR 61074-1991 用差示扫描量热法对电气绝缘材料的结晶、熔化温度和热量的测定

Determination of heats and temperatures of melting and crystallization of electrical insulatingmaterials by differential scanning calorimetry23P;A4

IEC/TR 61081-1991 相关过程气体驱动的气动仪器.安全安装和操作程序.导则Pneumatic instruments driven by associated process gas; safe installation and operatingprocedures; guidelines15P;A4

IEC/TR 61088-1991 超声波压电陶瓷传感器的特性和测量方法Characteristics and measurements of ultrasonic piezoceramic transducers34P;A4

IEC/TR 61131-8-2000 可编程的控制器.第8部分:程序设计语言的执行和应用指南Programmable controllers - Part 8: Guidelines for the application and implementation ofprogramming languages

IEC/TR 61241-2-2-1993用于易燃粉尘的电气设备.第2部分:试验方法.第2节:层间粉

尘电阻率的测定方法

Electrical apparatus for use in the presence of combustible dust; part 2: test methods; section 2:method for determining the electrical resistivity of dust in layers17P;A4

IEC/TR 61282-1-2000 光纤通信系统的设计指南.第1部分:单模数字和模拟系统Fibre optic communication system design guides - Part 1: Single-mode digital and analoguesystems

IEC/TR 61282-3-2002 纤维光学通信系统设计指南.第3部分:偏振模散射计算Fibre optic communication system design guides - Part 3: Calculation of polarisation modedispersion

IEC/TR 61282-5-2002光纤通信系统的设计指南.第5部分:传播体系的适应性和报

酬

Fibre optic communication system design guides - Part 5: Accommodation and compensation ofdispersion39P;A4

IEC/TR 61282-6-2003纤维光学通信系统的设计指南.第6部分:并行光学互连系统

的非对称设计

Fibre optic communication system design guides - Part 6: Skew design in parallel opticalinterconnection systems50P;A4

IEC/TR 61282-7-2003纤维光学通信系统的设计指南.第7部分:颜色色散的统计计

算

Fibre optic communication system design guides - Part 7: Statistical calculation of chromaticdispersion20P;A4

IEC/TR 61292-1-1998 光纤.放大器元件参数Fibre optics - Parameters of amplifier components19P;A4

IEC/TR 61292-2-2003光学放大器技术报告.第2部分:用电频谱分析仪评价噪音数

字的理论背景

Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluationusing the electrical spectrum analyzer18P;A4

IEC/TR 61340-2-2-2000 静电.第2-2部分:测量方法.荷电率的测量Electrostatics - Part 2-2: Measurement methods; Measurement of chargeability31P;A4

（333） 351

IEC标准目录


开本页数

IEC/TR 61346-3-2001工业系统、装置、设备和工业产品.结构规则和参考名称与

符号.第3部分:应用指南

Industrial systems, installations and equipment and industrial products - Structuring principlesand reference designations - Part 3: Application guidelines113P;A4

IEC/TR 61364-1999 水力发电机械用术语Nomenclature for hydroelectric powerplant machinery171P;A4

IEC/TR 61400-24-2002 风力涡轮机发电机系统.第24部分:避雷装置Wind turbine generator systems - Part 24: Lightning protection69P;A4

IEC/TR 61660-3-2000发电厂和变电所内直流辅助设备的短路电流.第3部分:计算

示例

Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 3:Examples of calculations93P;A4

IEC/TR 61807-1999 硬磁性材料在高温时的磁性.测量方法Magnetic properties of magnetically hard materials at elevated temperatures - Methods ofmeasurement25P;A4

IEC/TR 61831-1999 在线分析系统.设计和安装指南On-line analyser systems - Guide to design and installation165P;A4

IEC/TR 61832-1999 分析仪比较.技术查询指南和出价评估Analyser systems - Guide to technical enquiry and bid evaluation59P;A4

IEC/TR 61838-2001核电厂.与安全有重要关系的仪器仪表和控制功能.分类的

概率安全评定的使用

Nuclear power plants - Instrumentation and control functions important for safety - Use ofprobabilistic safety assessment for the classification79P;A4

IEC/TR 61911-2003 带电作业.配线导体的安装指南.架线设备和辅助用具Live working - Guidelines for the installation of distribution line conductors; Stringing equipmentand accessory items124P;A4

IEC/TR 61926-1-1-1999 设计自动化.第1-1部分:ATLAS计算机试验语言的一致性Design automation - Part 1-1: Harmonization of ATLAS test languages45P;A4

IEC/TR 61948-1-2001 核医学仪器装置.常规试验.第1部分:辐射计数试验Nuclear medicine instrumentation - Routine tests - Part 1: Radiation counting systems10P;A4

IEC/TR 61948-2-2001核医学仪器装置.常规试验.第2部分:闪烁摄影机和单光子辐

射计算机断层摄影成像

Nuclear medicine instrumentation - Routine tests - Part 2: Scintillation cameras and single photonemission computed tomography imaging13P;A4

IEC/TR 61997-2001 通用多媒体设备的用户接口导则Guidelines for the user interface in multimedia equipment for general purpose use34P;A4

IEC/TR 61998-1999 多媒体设备和系统标准化的模型和框架Model and framework for standardization in multimedia equipment and systems65P;A4

IEC/TR 62014-3-2002电子设计自动化程序库.第3部分:EMI行为模拟用集成电路

的模型

Electronic design automation libraries - Part 3: Models of integrated circuits for EMI behaviouralsimulation14P;A4

IEC/TR 62017-1-2001 设计自动化类目的文献.第1部分:EDA工业标准线路图Documentation on design automation subjects - Part 1: EDA industry standards roadmap108P;A4

（334） 351

IEC标准目录


开本页数

IEC/TR 62017-2-2001 设计自动化类目的文献.第2部分:面向2002的EIAJ-EDA技术线路图

Documentation on design automation subjects - Part 2: EIAJ-EDA technology roadmap toward2002

IEC/TR 62051-1999 电度表.术语汇编Electricity metering - Glossary of terms57P;A4

IEC/TR 62059-11-2002 电量计量设备.可靠性.第11部分:一般概念Electricity metering equipment - Dependability - Part 11: General concepts25P;A4

IEC/TR 62059-21-2002电量测量设备.可靠性.第21部分:测量可靠性数据的现场收

集

Electricity metering equipment - Dependability - Part 21: Collection of meter dependability datafrom the field29P;A4

IEC/TR 62060-2001 二次电池和电池组.监测酸性铅蓄电池用户指南Secondary cells and batteries - Monitoring of lead acid stationary batteries - User guide79P;A4

IEC/TR 62062-2002 为评价对IEC 60112的修改建议所作的循环试验的结果Results of the Round Robin series of tests to evaluate proposed amendments to IEC 6011293P;A4

IEC/TR 62063-1999高压开关设备和控制设备.开关设备和控制设备的辅助设备

中电子与相关工艺的使用

High-voltage switchgear and controlgear - The use of electronic and associated technologies inauxiliary equipment of switchgear and controlgear79P;A4

IEC/TR 62064-1999无线电射频电缆.表面传输阻抗和滤屏衰减(在IEC61196-1标准14条款包含推荐极限值的基本材料)之间的关系

Radio-frequency cables - Relationship between surface transfer impedance and screeningattenuation (A background to the recommended limits contained in IEC 61196-1, clause 14)14P;A4

IEC/TR 62066-2002 在低压交流电源系统中电涌过电压和电涌保护装置Surge overvoltages and surge protection in low-voltage a.c. power systems - General basicinformation

IEC/TR 62068-2-2001电绝缘系统(EIS).重复脉冲产生的电应力.第2部分:产品状

态

Electrical insulation systems (EIS) - Electrical stresses produced by repetitive impulses - Part 2:State of the art47P;A4

IEC/TR 62096-2002 核电厂.仪表和控制.确定现代化指南Nuclear power plants - Instrumentation and control - Guidance for the decision on modernization99P;A4

IEC/TR 62102-2001 电气安全.与信息和通信网络相连的设备接口的分类Electrical safety - Classification of interfaces for equipment to be connected to information andcommunications technology networks22P;A4

IEC/TR 62112-2001手控电动电气设备安全.钻头的特殊要求.突然停止动力的

试验方法

Safety for hand-held motor-operated electric tools - Particular requirements for drills - Testprocedure concerning dynamic forces at sudden stalling10P;A4

IEC/TR 62140-1-2002 燃烧矿物燃料蒸汽发电站.第1部分:极限控制Fossil-fired steam power stations - Part 1: Limiting controls55P;A4

IEC/TR 62140-2-2002 燃烧矿物燃料蒸汽发电站.第2部分:鼓室级控制Fossil-fired steam power stations - Part 2: Drum-level control16P;A4

IEC/TR 62140-3-2002 燃烧矿物燃料蒸汽发电站.第3部分:蒸汽温度控制Fossil-fired steam power stations - Part 3: Steam-temperature control15P;A4

IEC/TR 62157-2001 柱状机制碳电极.公称尺寸Cylindrical machined carbon electrodes - Nominal dimensions7P;A4

（335） 351

IEC标准目录


开本页数

IEC/TR 62195-2000 动力系统控制和相应的通讯.非控制的能量市场的通讯Power system control and associated communications - Deregulated energy marketcommunciations

IEC/TR 62221-2001 光纤.测量方法.微弯敏感性Optical fibres - Measurement methods - Microbending sensitivity23P;A4

IEC/TR 62225-2001 电子设备的连接件和机械结构的术语指南Guidance on terms for connectors and mechanical structures in electronic equipment47P;A4

IEC/TR 62245-2002 光纤.测量方法.A3和A4型光纤的弯曲损耗Optical fibres - Measurement methods - Bend loss for A3 and A4 type fibres11P;A4

IEC/TR 62248-2002 设计自动化标准的一致性与认证测试Approaches to conformance and certification testing for design automation standards11P;A4

IEC/TR 62266-2002 医疗电气设备.放射疗法中DICOM的实现指南Medical electrical equipment - Guidelines for implementation of DICOM in radiotherapy46P;A4

IEC/TR 62271-308-2002高压开关设备和控制设备.第308部分:不对称短路试验功率

T100a指南

High-voltage switchgear and controlgear - Part 308: Guide for asymmetrical short-circuit breakingtest duty T100a89P;A4

IEC/TR 62283-2003 核辐射.纤维光学指南Nuclear radiation - Fibre optic guidance64P;A4

IEC/TR 62284-2003 单模光纤有效区域测量.指南Effective area measurements of single-mode optical fibres - Guidance88P;A4

IEC/TR 62285-2002 非线性系数测量法.应用指南Non-linear coefficient measuring methods - Application guide39P;A4

IEC/TR 62291-2002 多媒体数据存储.UDF基文件体系的应用程序接口Multimedia data storage - Application program interface for UDF based file systems15P;A4

IEC/TR 62324-2003 单模光纤.用连续波法测定喇曼增益效率.指南Single-mode optical fibres - Raman gain efficiency measurement of single-mode optical fibresusing continuous wave method; Guidance36P;A4

IEC/TR2 60034-16-3-1996 旋转电机.第16部分:同步电机的激励系统.第3节:动态性能Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3:Dynamic performance33P;A4

IEC/TR2 60034-18-32-1995旋转电机.第18部分:绝缘系统功能评定.模绕组的试验步骤.功率小于等于50MVA绝缘系统的电气评定

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32:Test procedures for form-wound windings - Electrical evaluation of insulation systems used inmachines up to and including 50 MVA and 15 kV26P;A4

IEC/TR2 60034-18-33-1995旋转电机.第18部分:绝缘系统功能评定.模绕组的试验步骤.功率小于等于50MVA,15KV绝缘系统的电气应力和热应力

的强度

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33:Test procedures for form-wound windings - Multifactor functional evaluation - Endurance underthermal and electrical stresses of insulation systems used in machines up to and including 50MVA and 15 kV

IEC/TR2 60146-6-1992半导体变流器.第6部分:用熔断器预防过电流的半导体变流

器保护的应用指南

Semiconductor convertors; part 6: application guide for the protection of semiconductorconvertors against overcurrent by fuses33P;A4

（336） 351

IEC标准目录


开本页数

IEC/TR2 60349-3-1995电力牵引.铁路和公路车辆用旋转电机.第3部分:用元件损失

总和计算法测定交流电动机变压器的总损失

Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination ofthe total losses of convertor-fed alternating current motors by summation of the componentlosses

IEC/TR2 60479-1-1994 电流对人和家畜的影响.第1部分:一般方面Effects of current on human beings and livestock - Part 1: General aspects66P;A4

IEC/TR2 60479-3-1998电流对人和家畜的影响.第3部分:通过家畜体内的电流的影

响

Effects of current on human beings and livestock - Part 3: Effects of currents passing through thebody of livestock31P;A4

IEC/TR2 60514-1975 2级直接连接式交流电度表.第2部分Class 2 direct connected alternating-current watthour meters - Part II71P;A4

IEC/TR2 60695-6-30-1996火灾危害试验.第6部分: 陷入火灾中的电机产品发出的浓烟

引起的视觉模糊损害评估的试验方法和指南. 第30部分:小规模静态法.烟雾不透光性的测定.设备的描述

Fire hazard testing - Part 6: Guidance and test methods on the assessment of obscurationhazard of vision caused by smoke opacity from electrotechnical products involved in fires -Section 30: Small scale static method - Determination of smoke opacity - Description of theapparatus

IEC/TR2 60695-7-3-1998 火灾危害试验.第7-3部分:燃烧后物质的毒性.试验结果的使

用和说明

Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results45P;A4

IEC/TR2 60695-7-4-1995火灾危害试验.第7部分: 归因于包围机电产品的火焰的低

毒性危害指南.第4节:火灾中非常毒物的影响

Fire hazard testing - Part 7: Guidance on the minimization of toxic hazards due to fires involvingelectrotechnical products - Section 4: Unusual toxic effects in fires19P;A4

IEC/TR2 60727-2-1993电气绝缘结构电气耐久性的评定.第2部分:基于极限值分布

的评定规程

Evaluation of electrical endurance of electrical insulation systems; part 2: evaluation proceduresbased on extreme-value distributions71P;A4

IEC/TR2 60816-1984 在低电压和单线上短期持续瞬态的测量指南Guide on methods of measurement of short duration transients on low voltage power and signallines.

IEC/TR2 60868 AMD 1-1990 闪烁计.功能和设计规范.IEC 60868-1986修改件1Flickermeter; funtional and design specifications; amendment 1 to IEC 60868:19869P;A4

IEC/TR2 60868-0-1991 闪烁计.0部分:闪烁程度的估计Flickermeter; part 0: evaluation of flicker severity42P;A4

IEC/TR2 60868-1986 闪烁计.功能和设计规范Flickermeter. Functional and design specifications31P;A4

IEC/TR2 60870-6-504-1998遥控设备和系统.第6-504部分:与ISO标准和ITU-T推荐标准

互通的遥控协议.TASE.1用户约定

Telecontrol equipment and systems - Part 6-504: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations - TASE.1 user conventions339P;A4

IEC/TR2 60871-3-1996额定电压1000V以上的交流电系统分路电容器.第3部分:分路电容器和分路电容器组的保护

Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 3: Protectionof shunt capacitors and shunt capacitor banks50P;A4

IEC/TR2 61000-2-5-1995电磁兼容性(EMC).第2部分:环境. 第5节:电磁环境的分类.基础EMC出版物

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 5: Classification ofelectromagnetic environments; Basic EMC publication101P;A4

（337） 351

IEC标准目录


开本页数

IEC/TR2 61000-3-4-1998电磁兼容性(EMC).第3-4部分:用大于16A额定电流的设备

的低压供电系统谐波电流发射的限制

Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmoniccurrents in low-voltage power supply systems for equipment with rated current greater than 16 A29P;A4

IEC/TR2 61000-3-5-1994电磁兼容性(EMC).第3部分:极限.第5节:额定电流大于16A的设备低压供电系统电压波动和闪动的限制

Electromagnetic compatibility (EMC) - Part 3: Limits; section 5: Limitation of voltage fluctuationsand flicker in low-voltage power supply systems for equipment with rated current greater than 16A

IEC/TR2 61000-5-4-1996电磁兼容性(EMC).第5部分:安装和缓和指南.第4节:HEMP免疫.HEMP辐射干扰的防护装置规范.基础EMC出版物

Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 4:Immunity to HEMP - Specifications of protective devices against HEMP radiated disturbance -Basic EMC publication54P;A4

IEC/TR2 61071-2-1994电力电子电容器.第2部分:熔断丝非接触试验、破坏试验、

自合拢试验和耐力试验的要求

Power electronic capacitors - Part 2: Requirements for disconnecting test on fuses, destructiontest, self-healing test and endurance test35P;A4

IEC/TR2 61072-1991 电气树枝分路起始的绝缘材料抗性评估的试验方法

Methods of test for evaluating the resistance of insulating materials against the initiation ofelectrical trees49P;A4

IEC/TR2 61085-1992 电力网系统电信服务的总设计General considerations for telecommunication services for electric power systems73P;A4

IEC/TR2 61087-1991 由一个充电表面放电的评估指南Guide for evaluating the discharges from a charged surface21P;A4

IEC/TR2 61149-1995 移动无线电设备的安全运用和操作指南Guide for safe handling and operation of mobile radio equipment47P;A4

IEC/TR2 61170-1993 放射料法模拟器,实用性能特征指南Radiotherapy simulators; guidelines for functional performance characteristics35P;A4

IEC/TR2 61200-52-1993 电气安装指南.第52部分:电气设备的选择和安装.布线系统Electrical installation guide; part 52: selection and erection of electrical equipment; wiringsystems

IEC/TR2 61200-53-1994电气安装指南.第53部分:电气设备的选择和安装.开关设备

和控制设备

Electrical installation guide - Part 53: Selection and erection of electrical equipment - Switchgearand controlgear17P;A4

IEC/TR2 61206-1993 超声波.连续波动多普勒系统.试验过程Ultrasonics; continuous-wave Doppler systems; test procedures62P;A4

IEC/TR2 61211-1994额定电压大于1000V的架空线的陶瓷材料或玻璃绝缘子.击穿试验

Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than1000 V - Puncture testing47P;A4

IEC/TR2 61220-1993超声场.用水听器在频率范围0.5MHZ--15MHZ由医学超声

设备产生的超声场的特性和测量指南

Ultrasonics-fields; guidance for the measurement and characterization of ultrasonic fieldsgenerated by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHzto 15 MHz

IEC/TR2 61221-1993石油产品和润滑剂.三芳基磷酸酯涡轮控制液(目录ISO-L-TCD),规范

Petroleum products and lubricants; triaryl phosphate ester turbine control fluids (category ISO-L-TCD); specifications33P;A4

（338） 351

IEC标准目录


开本页数

IEC/TR2 61223-1-1993 医疗成像部门常规试验和评估.第1部分:一般方面Evaluation and routine testing in medical imaging departments; part 1: general aspects41P;A4

IEC/TR2 61223-2-1-1993医疗成像部门常规试验和评估.第2部分:稳定性试验,胶片加

工机

Evaluation and routine testing in medical imaging departments; part 2-1: constancy tests; filmprocessors57P;A4

IEC/TR2 61223-2-3-1993医疗成像部门常规试验和评估.第2部分:稳定性试验.暗室安

全光条件

Evaluation and routine testing in medical imaging departments; part 2-3: constancy tests;darkroom safelight conditions31P;A4

IEC/TR2 61233-1994 高压选择电流线路断路器.感应负载开关High-voltage alternating current circuit-breakers - Inductive load switching158P;A4

IEC/TR2 61238-2-1997带有铜或铝导体的电力电缆的机械连接件和压缩.第2部分:与达到和包括1KV设备相配套的电力电缆终端接线片

Compression and mechanical connectors for power cables with copper or aluminium conductors- Part 2: Terminal lugs for power cables to fit equipment up to and including 1 kV - Overalldimensions

IEC/TR2 61244-1-1993高聚物长期辐射老化的测定.第1部分:检测氧化弥漫极限的

技术

Determination of long-term radiation ageing in polymers; part 1: techniques for monitoringdiffusion-limited oxidation64P;A4

IEC/TR2 61244-2-1996聚合物长期辐照老化的测定.第2部分:低剂量比率下预测老

化的过程

Determination of long-term radiation ageing in polymers - Part 2: Procedures for predictingageing at low dose rates56P;A4

IEC/TR2 61244-3-1998高聚物长期辐射老化的测定.第3部分:低压电缆材料的使用

中监测过程

Long-term radiation ageing in polymers - Part 3: Procedures for in-service monitoring of low-voltage cable materials77P;A4

IEC/TR2 61245-1993 用在直流系统的高压绝缘子的人工污染试验Artificial pollution tests on high-voltage insulators to be used on d.c. systems61P;A4

IEC/TR2 61251-1993 电气绝缘材料.交流电压耐性评估.介绍Electrical insulating materials; A.C. voltage endurance evaluation; introduction49P;A4

IEC/TR2 61278-1997 带电作业.工具和设备介电试验指南Live working - Guidelines for dielectric testing of tools and equipment29P;A4

IEC/TR2 61312-4-1998 防止雷电电磁冲击.第4部分:现有结构下设备的防护Protection against lightning electromagnetic impulse - Part 4: Protection of equipment in existingstructures39P;A4

IEC/TR2 61318-1994 带电作业.质量保险计划指南Live working - Guidelines for quality assurance plans23P;A4

IEC/TR2 61321-1-1994快速脉冲高压试验技术.第1部分:气体绝缘变电所产生的快

速过电压的测量系统

High-voltage testing techniques with very fast impulses - Part 1: Measuring systems for very fastfront overvoltages generated in gas-insulated substations62P;A4

IEC/TR2 61328-1995带电作业.传输系线导体和地线的安装.架线设备和附属条

款

Live working - Installation of transmission line conductors and earthwires - Stringing equipmentand accessory items123P;A4

（339） 351

IEC标准目录


开本页数

IEC/TR2 61334-5-2-1998使用配电线路载供系统的自动配电.第5-2部分:低层分布图.频移键控(FSK)分布图

Distribution automation using distribution line carrier systems - Part 5-2: Lower layer profiles -Frequency Shift Keying (FSK) profile

IEC/TR2 61340-5-1-1998 静电学.第5-1部分:有静电现象的电子设备的保护.总要求Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - Generalrequirements157P;A4

IEC/TR2 61354-1995 电度表.计数装置的辅助终端标记Electricity meters - Marking of auxiliary terminals for tariff devices15P;A4

IEC/TR2 61356-1995电气绝缘结构的功能评定.比较试验不可行时的试验规程原

则

Functional evaluation of electrical insulation systems - Principles for test procedures whencomparative testing is not feasible41P;A4

IEC/TR2 61359-1995 电气绝缘结构的评定和鉴定.环境评定Evaluation and identification of electric insulation systems - Environment evaluation29P;A4

IEC/TR2 61382-1-1996电子道路车辆推进通用的镍镉再充电电池和蓄电池组.第1部分:动态放电性能试验(DPPT)和动态耐性试验(DET)

Nickel/cadmium rechargeable cells and batteries for electric road vehicle propulsion applications- Part 1: Dynamic discharge performance test (DDPT) and dynamic endurance test (DET)19P;A4

IEC/TR2 61390-1996 超声波学.实时脉冲回声系统.测定性能规范的试验过程Ultrasonics - Real-time pulse-echo systems - Test procedures to determine the performancespecifications49P;A4

IEC/TR2 61394-1997 架空线.铝润滑油特性,铝合金和钢裸导电体Overhead lines - Characteristics of greases for aluminium, aluminium alloy and steel bareconductors

IEC/TR2 61423-1-1995工业用途加热电缆.第1部分:性能要求和试验方法.技术报告

2型

Heating cables for industrial applications - Part 1: Performance requirements and test methods;Technical Report Type 225P;A4

IEC/TR2 61423-2-1995 工业用途加热电缆.第2部分:结构和材料要求.技术报告2型Heating cables for industrial applications - Part 2: Constructional and material requirements;Technical Report Type 225P;A4

IEC/TR2 61430-1997二级电池和蓄电池组.检查为减轻爆炸危害而设计的装置性

能的试验方法.铅酸启动蓄电池

Secondary cells and batteries - Test methods for checking the performance of devices designedfor reducing explosion hazards - Lead-acid starter batteries25P;A4

IEC/TR2 61438-1996在使用碱性二级电池和蓄电池组时的可能安全性和健康危害. 设备工艺和使用者指南

Possible safety and health hazards in the use of alkaline secondary cells and batteries - Guide toequipment manufacturers and users35P;A4

IEC/TR2 61462-1998复合绝缘子.用于室内和室外电气设备的中空绝缘子.标识,试验方法,验收标准和设计推荐

Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment -Definitions, test methods, acceptance criteria and design recommendations83P;A4

IEC/TR2 61464-1998绝缘衬套.油作为主要绝缘注入介质(普通纸)的衬套中溶解

气体分析(DGA)的注释指南

Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushingswhere oil is the impregnating medium of the main insulation (generally paper)31P;A4

（340） 351

IEC标准目录


开本页数

IEC/TR2 61467-1997额定电压大于1000V的架空线绝缘字.绝缘装置交流电弧试

验

Insulators for overhead lines with a nominal voltage above 1000 V - A.C. power arc tests oninsulator sets69P;A4

IEC/TR2 61586-1997 电气接触点可靠度的评估Estimation of the reliability of electrical connectors36P;A4

IEC/TR2 61624-1997 用于电动机械装置的高聚化合物的大可允许温度的列表指南

Guidance on the development of lists of maximum allowable temperatures for polymericcompounds used in electrotechnical equipment33P;A4

IEC/TR2 61633-1995高压选择电流线路断路器.金属封闭的和不通电的箱式线路

断路器短路和开关试验设备指南

High-voltage alternating current circuit-breakers - Guide for short-circuit and switching testprocedures for metal-enclosed and dead tank circuit-breakers63P;A4

IEC/TR2 61634-1995高压开关设备和控制设备. 高压开关设备和控制设备中六

氟化硫的使用和操作.技术报告2型

High-voltage switchgear and controlgear - Use and handling of sulphur hexafluoride (SF) in high-voltage switchgear and controlgear; Technical Report Type 2161P;A4

IEC/TR2 61639-199672.5KV及以上气体绝缘金属封闭和电力传输之间的直接连

接

Direct connection between power transformers and gas-insulated metal-enclosed switchgear forrated voltages of 72,5 kV and above33P;A4

IEC/TR2 61640-1998 额定电压是72,5和以上的隔气刚性高压传输线Rigid high-voltage, gas-insulated transmission lines for rated voltage of 72,5 kV and above117P;A4

IEC/TR2 61662 AMD 1-1996 雷电导致的损害危险估计.补充件1Assessment of the risk of damage due to lightning; Amendment 113P;A4

IEC/TR2 61662-1995 雷电导致的损害危险估计Assessment of the risk of damage due to lightning109P;A4

IEC/TR2 61774-1997 架空线.评估气候负载的气象数据Overhead lines - Meteorological data for assessing climatic loads91P;A4

IEC/TR2 61836-1997 太阳光电器件能量系统.术语和符号Solar photovoltaic energy systems - Terms and symbols21P;A4

IEC/TR2 61902-1998 家用微波炉.透明炉门的可视清晰度Household microwave ovens - Visual clarity of see-through oven doors14P;A4

IEC/TR2 62056-41-1998电表.读表、计费和负载控制数据交换.使用广域网的数据

交换.第41部分:带链接和协议的公共转换电话网(PSTN)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 41: Dataexchange using wide area networks: Public switched telephone network (PSTN) with LINK+proto~ol

IEC/TR2 62056-51-1998电度表.仪表读数、费率和负载控制的数据交换.第51部分:应用层协议

Electricity metering - Data exchange for meter reading, tariff and load control - Part 51:Application layer protocols69P;A4

IEC/TR2 62056-52-1998电度表.仪表读数、费率和负载控制的数据交换.第52部分:管理配电线路信息规范(DLMS)服务器通信协议

Electrical metering - Data exchange for meter reading, tariff and load control - Part 52:Communication protocols management distribution line message specification (DLMS) server25P;A4

（341） 351

IEC标准目录


开本页数

IEC/TR3 60079-20-1996爆炸气体环境的电器设备.第20部分:与使用电气设备有关

的可燃性气体和蒸气的数据

Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases andvapours, relating to the use of electrical apparatus47P;A4

IEC/TR3 60083-1997在IEC成员国中使用的家用和类似用途标准化插头和插座

引出线

Plugs and socket-outlets for domestic and similar general use standardized in the membercountries of IEC285P;A4

IEC/TR3 60092-390-1997 船上的电气安装.第390部分:电缆的熔焊透.着火型试验过程Electrical installations in ships - Part 390: Cable penetrations - Fire type test procedure19P;A4

IEC/TR3 60268-18-1995 声音系统设备.第18部分:峰值音量表.数字型声音峰值表Sound system equipment - Part 18: Peak programme level meters - Digital audio peak levelmeter

IEC/TR3 60513-1994 医用电气设备安全标准的基本方面Fundamental aspects of safety standards for medical electrical equipment125P;A4

IEC/TR3 60664-2-1-1997低压系统内设备绝缘协调性.第2-1部分:应用指南.尺寸选定

样品和尺寸处理加工单

Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide -Dimensioning procedure worksheets and dimensioning examples23P;A4

IEC/TR3 60664-4-1997 低压系统内设备绝缘协调性.第4部分:高频电压应力问题Insulation coordination for equipment within low-voltage systems - Part 4: Considerations of high-frequency voltage stress59P;A4

IEC/TR3 60725-1981 测定家用电器和类似电气设备干扰特性的参考阻抗的条款

Considerations on reference impedances for use in determining the disturbance characteristics ofhousehold appliances and similar electrical equipment11P;A4

IEC/TR3 60736-1982 电能仪表的试验设备Testing equipment for electrical energy meters33P;A4

IEC/TR3 60825-3-1995 激光产品的安全.第3部分:激光显示器指南Safety of laser products - Part 3: Guidance for laser displays and shows29P;A4

IEC/TR3 60870-1-3-1997 远程控制设备和系统.第1部分:一般原理.第3节:术语集Telecontrol equipment and systems - Part 1: General considerations - Section 3: Glossary75P;A4

IEC/TR3 60870-1-4-1994远程控制设备和系统.第1部分:一般原理.第4节:IEC 60870-5和IEC 60870-6标准的远程控制数据传输和组织的一般特

性

Telecontrol equipment and systems - Part 1: General considerations - Section 4: Basic aspectsof telecontrol data transmission and organization of standards IEC 60870-5 and IEC 60870-655P;A4

IEC/TR3 60870-6-1-1995遥控设备和系统.第6部分:适用于ISO标准和ITU-T推荐规范

的遥控协议.第1节:应用范围和标准组织

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standardsand ITU-T recommendations - Section 1: Application context and organization of standards141P;A4

IEC/TR3 60877-1999 保证工业处理测量和氧服务控制设备的清洁处理的过程Procedures for ensuring the cleanliness of industrial-process measurement and controlequipment in oxygen service

IEC/TR3 60890 AMD 1-1995低压开关装置和控制装置部分定型试验组件用的外推法温升鉴定.修改件1

A method of temperature-rise assessment by extrapolation for partially-tested assemblies (PTTA)of low-voltage switchgear and controlgear; Amendment 111P;A4

IEC/TR3 60890-1987 低压开关装置和控制装置部分定型试验组件用的外推法温升鉴定

A method of temperature-rise assessment by extrapolation for partially type-tested assemblies(PTTA) of low-voltage switchgear and controlgear

（342） 351

IEC标准目录


开本页数

IEC/TR3 60909-2-1992 电力设备.与IEC 60909-88一致的短路电流的计算数据Electrical equipment; data for short-circuit current calculations in accordance with IEC60909:1988

IEC/TR3 60958-2-1994 数字声频接口.第2部分:软件信息交货模式Digital audio interface - Part 2: Software information delivery mode15P;A4

IEC/TR3 61000-1-1-1992电磁兼容性.第1部分:总则.第1节:基本定义和术语的应用与

释义

Electromagnetic compatibility (EMC); part 1: general; section 1: application and interpretation offundamental definitions and terms59P;A4

IEC/TR3 61000-2-1-1990电磁兼容性.第2部分:环境.第1节:环境的描述.公共供电系统

中低频传导干扰和信号的电磁环境

Electromagnetic compatibility (EMC); part 2: environment; section 1: description of theenvironment; electromagnetic environment for low-frequency conducted disturbances andsignalling in public power supply systems48P;A4

IEC/TR3 61000-2-3-1992电磁兼容性.第2部分:环境.第3节:环境描述.辐射现象和非网

络频率相关导电现象

Electromagnetic compatibility (EMC); part 2: environment; section 3: description of theenvironment; radiated and non-network-frequency-related conducted phenomena135P;A4

IEC/TR3 61000-2-6-1995电磁兼容性(EMC).第2部分:环境.第6节:工厂电力供应在低

频传导干扰时发射水平的评估

Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of theemission levels in the power supply of industrial plants as regards low-frequency conducteddisturbances

IEC/TR3 61000-3-6-1996电磁兼容性(EMC).第3部分:限定值.第6节:中压和高压电力

系统畸变负载用辐射极限的评定.基本电磁兼容性的发布

Electromagnetic compatibility (EMC) - Part 3: Limits - Section 6: Assessment of emission limitsfor distorting loads in MV and HV power systems - Basic EMC publication113P;A4

IEC/TR3 61000-3-7-1996电磁兼容性(EMC).第3部分:限定值.第7节:中压和高压电力

系统波动负载用辐射极限的评定.基本电磁兼容性的发布

Electromagnetic compatibility (EMC) - Part 3: Limits - Section 7: Assessment of emission limitsfor fluctuating loads in MV and HV power systems - Basic EMC publication81P;A4

IEC/TR3 61000-5-1-1996电磁兼容性.第5部分:安装和调节导则.第1节:一般研究.基础

电磁兼容性出版物

Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1:General considerations - Basic EMC publication61P;A4

IEC/TR3 61000-5-2-1997 电磁兼容性.第5部分:装置和缓冲指南.第2节:接地和布线Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2:Earthing and cabling137P;A4

IEC/TR3 61010-3-010-1999测量、控制和实验室用电气设备的安全要求.第3-010部分:材料加热用实验室设备的特殊要求,IEC 61010-2-010标准

规定的合格鉴定报告

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-010: Conformity verification report for IEC 61010-2-010, particular requirements for laboratoryequipment for the heating of materials61P;A4

IEC/TR3 61010-3-051-1999测量、控制和实验室用电气设备的安全要求.第3-051部分:混合及搅拌用实验室设备的特殊要求,IEC 61010-2-051标准规定的合格鉴定报告

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-051: Conformity verification report for IEC 61010-2-051, particular requirements for laboratoryequipment for mixing and stirring61P;A4

（343） 351

IEC标准目录


开本页数

IEC/TR3 61010-3-061-1999测量、控制和实验室用电气设备的安全要求.第3-061部分:带雾化和电离作用的实验室原子分光计的特殊要求,IEC61010-2-061标准规定的合格鉴定报告

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-061: Conformity verification report for IEC 61010-2-061, particular requirements for laboratoryatomic spectrometers with thermal atomization and ionization62P;A4

IEC/TR3 61010-3-1-1997测量,控制和实验室用电气设备的安全要求.第3-1部分:IEC61010-1标准用合格鉴定报告

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3-1: Conformity verification report for IEC 61010-160P;A4

IEC/TR3 61010-3-1997测量,控制和实验室用电气设备的安全要求.第3部分:IEC61010系列标准用合格鉴定报告的制备协议

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part3: Protocol for the preparation of conformity verification reports for the IEC 61010 series25P;A4

IEC/TR3 61056-3-1991便携式铅酸蓄电池和蓄电池组(阀调节型).第3部分:用于电

气设备的安全推荐标准

Portable lead-acid cells and batteries (valve-regulated types); part 3: safety recommendations foruse in electric appliances9P;A4

IEC/TR3 61082-6-1997 电工技术中用文献的处理.第6部分:索引Preparation of documents used in electrotechnology - Part 6: Index18P;A4

IEC/TR3 61117-1992 便携式检验组合装置耐短路电流强度的评定方法

A method for assessing the short-circuit withstand strength of Partially Type-Tested Assemblies(PTTA)13P;A4

IEC/TR3 61119-4-1997 数字音频磁带装置.第4部分:字符组合格式Digital audio tape (DAT) cassette system - Part 4: Character pack format47P;A4

IEC/TR3 61119-7-1995 数字音频盒式磁带.第7部分:数字盒式音频磁带应用规则Digital audio tape cassette system (DAT) - Part 7: DAT logo application rule16P;A4

IEC/TR3 61127-1992 高压氙短弧灯的尺寸、电和光的数据及帽型High pressure xenon short arc lamps; dimensional, electrical and photometric data and cap types47P;A4

IEC/TR3 61131-4-1995 编程控制器.第4部分:用户指南Programmable controllers - Part 4: User guidelines119P;A4

IEC/TR3 61141-1992 射频(r.f.)同轴连接器的频率上限Upper frequency limit of r.f. coaxial connectors43P;A4

IEC/TR3 61147-1993 红外线传输的应用和系统间干扰的防护和控制Uses of infra-red transmission and the prevention or control of interference between systems38P;A4

IEC/TR3 61200-413-1996电气安装导则.第413部分:间接接触的防护.电源自动切断装

置

Electrical installation guide - Part 413: Protection against indirect contact - Automaticdisconnection of supply93P;A4

IEC/TR3 61200-704-1996 电气安装导则.第704部分:建造和拆除工地装置Electrical installation guide - Part 704: Construction and demolition site installations45P;A4

IEC/TR3 61201-1992 超低压.极限值Extra-low voltage (ELV); limit values31P;A4

IEC/TR3 61258-1994 医疗电气设备教育材料的制定及使用指南Guidelines for the development and use of medical electrical equipment educational materials29P;A4

（344） 351

IEC标准目录


开本页数

IEC/TR3 61276-1994 核装置.计量学支持地核辐射光谱系统选择指南Nuclear instrumentation - Guidelines for selection of metrologically supported nuclear radiationspectrometry systems25P;A4

IEC/TR3 61288-1-1993 心脏去纤颤器;心脏去纤颤器用监测器.第1部分:操作Cardiac defibrillators; cardiac defibrillators-monitors; part 1: operation41P;A4

IEC/TR3 61288-2-1993 心脏去纤颤器;心脏去纤颤器用监测器.第2部分:维护Cardiac defibrillators; cardiac defibrillators-monitors; part 2: maintenance41P;A4

IEC/TR3 61289-1-1994 高频外科设备.第1部分:操作High frequency surgical equipment - Part 1: Operation33P;A4

IEC/TR3 61289-2-1994 高频外科设备.第2部分:维护High frequency surgical equipment - Part 2: Maintenance39P;A4

IEC/TR3 61294-1993 绝缘液体.局部放电开始电压的测定.试验方法Insulating liquids; determination of the partial discharge inception voltage (PDIV); test procedure23P;A4

IEC/TR3 61295-1994 广播磁带录象机用磁带的校验Calibration tapes for broadcast VTRs53P;A4

IEC/TR3 61334-1-1-1995配电线路载波通信系统用配电自动机械.第1部分:概论.第1节:配电自动化系统结构

Distribution automation using distribution line carrier systems - Part 1: General considerations -Section 1: Distribution automation system architecture59P;A4

IEC/TR3 61334-1-2-1997配电线路载波通信系统用配电自动机械.第1-2部分:概论.规范指南

Distribution automation using distribution line carrier systems - Part 1-2: General considerations -Guide for specification63P;A4

IEC/TR3 61334-1-4-1995配电线路载波通信系统用配电自动机械.第1部分:概论.第4节:中级和低压配电干线

Distribution automation using distribution line carrier systems - Part 1: General considerations -Section 4: Identification of data transmission parameters concerning medium and low-voltagedistribution mains55P;A4

IEC/TR3 61346-4-1998工业系统、装置和设备及工业产品.结构原则和参考标识.第4部分:概念的讨论

Industrial systems, installations and equipment and industrial products - Structuring principlesand reference designations - Part 4: Discussion of concepts47P;A4

IEC/TR3 61360-3-1995电子元件用带有分类表的标准数据元类型.第3部分:维修和

确认程序

Standard data element types with associated classification scheme for electric components - Part3: Maintenance and validation procedures23P;A4

IEC/TR3 61361-1995 电量计.局域和远程数据交换.应用和性能Electricity metering - Local and remote data exchange - Applications and performance67P;A4

IEC/TR3 61366-1-1998液压水轮机,蓄水泵和水泵水轮机.报价文件.第1部分:总则

和附录

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 1: Generaland annexes56P;A4

IEC/TR3 61366-2-1998液压水轮机,蓄水泵和水泵水轮机.报价文件.第2部分:轴向

辐流式水轮机的技术规范导则

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 2:Guidelines for technical specifications for Francis turbines33P;A4

（345） 351

IEC标准目录


开本页数

IEC/TR3 61366-3-1998液压水轮机,蓄水泵和水泵水轮机.报价文件.第3部分:冲击

式水轮机的技术规范导则

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3:Guidelines for technical specifications for Pelton turbines31P;A4

IEC/TR3 61366-4-1998液压水轮机,蓄水泵和水泵水轮机.报价文件.第4部分:转浆

式水轮机和涡轮螺旋浆发动机的技术规范导则

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 4:Guidelines for technical specifications for Kaplan and propeller turbines34P;A4

IEC/TR3 61366-5-1998液压水轮机,蓄水泵和水泵水轮机.报价文件.第5部分:贯流


Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 5:Guidelines for technical specifications for tubular turbines31P;A4

IEC/TR3 61366-6-1998液压水轮机,蓄水泵和水泵水轮机.报价文件.第6部分:可逆


Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 6:Guidelines for technical specifications for pump-turbines35P;A4

IEC/TR3 61366-7-1998液压水轮机,蓄水泵和水泵水轮机.报价文件.第7部分:蓄水

泵的技术规范导则

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 7:Guidelines for technical specifications for storage pumps32P;A4

IEC/TR3 61374-1997 牵引供电系统中的过电压Overvoltages in traction supply systems56P;A4

IEC/TR3 61431-1995 酸性铅蓄电池监控系统使用导则Guide for the use of monitor systems for lead-acid traction batteries31P;A4

IEC/TR3 61459-1996 低压熔断器.熔断器和电流接触器/电动机起动器间的协调.使用指南

Low-voltage fuses - Coordination between fuses and contactors/motor-starters - Applicationguide

IEC/TR3 61510-1996 RBMK核反应堆.仪器测量和改进控制的建议RBMK nuclear reactors - Proposals for instrumentation and control improvements139P;A4

IEC/TR3 61592-1996 家用电器.消费者委员会检测指南Household electrical appliances - Guidelines for consumer panel testing21P;A4

IEC/TR3 61597-1995 架空导电体.合股裸导电体的计算法.三类技术报告Overhead electrical conductors - Calculation methods for stranded bare conductors; TechnicalReport Type 385P;A4

IEC/TR3 61602-1996 音频,视频和视听工程领域使用的连接器Connectors used in the field of audio, video and audiovisual engineering35P;A4

IEC/TR3 61604-1997 磁性氧化铁的未涂覆环形铁芯尺寸Dimensions of uncoated ring cores of magnetic oxides33P;A4

IEC/TR3 61641-1996封装的低压开关和控制装置.内部错误引起的电弧放电条件

下的试验指南

Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditionsof arcing due to internal fault18P;A4

IEC/TR3 61734-1997 IEC 60617-12和IEC 60617-13标准的应用Application of IEC 60617-12 and IEC 60617-13 standards35P;A4

IEC/TR3 61852-1998电气医疗设备.医学中的数据图像和交流(DICOM).放射疗

法对象

Medical electrical equipment - Digital imaging and communications in medicine (DICOM) -Radiotherapy objects88P;A4

（346） 351

IEC标准目录


开本页数

IEC/TR3 61859-1997 放射治疗室的设计指南Guidelines for radiotherapy treatment rooms design27P;A4

IEC/TR3 61916-1998 电器附件.总则协调Electrical accessories - Harmonization of general rules59P;A4

IEC/TR3 61917-1998 电缆,电缆组件和连接件.电磁(EMC)扫描测量介绍Cables, cable assemblies and connectors - Introduction to electromagnetic (EMC) screeningmeasurements29P;A4

IEC/TR3 61923-1997 家用电器.性能测量方法.重复性和可再现性的评定Household electrical appliances - Method of measuring performance - Assessment ofrepeatability and reproducibility35P;A4

IEC/TR3 61930-1998 光纤图形符号Fibre optic graphical symbology41P;A4

IEC/TR3 61931-1998 光纤.术语Fibre optic - Terminology169P;A4

IEC/TR3 61940-1998 核装置.IEC60880(1986)的应用重述Nuclear instrumentation - A review of the application of IEC 60880 (1986)59P;A4

IEC/TR3 61955-1998 原电池.原电池贮存安装研究和处理极限风险的统计摘要Primary batteries - Summary of research and actions limiting risks to reserved installation ofprimary batteries11P;A4

IEC/TS 60034-17-2002旋转电机.第17部分:从变换器馈电时的鼠笼式感应电动机.应用指南

Rotating electrical machines - Part 17: Cage induction motors when fed from converters;Application guide35P;A4

IEC/TS 60034-18-34-2000旋转电机.第18-34部分:绝缘系统的功能评价.成型绕组试验

过程.绝缘系统的热机耐力评价

Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Testprocedures for form-wound windings - Evaluation of thermomechanical endurance of insulationsystems

IEC/TS 60034-20-1-2002 旋转电机.第20-1部分:控制发动机.步进马达Rotating electrical machines - Part 20-1: Control motors; Stepping motors71P;A4

IEC/TS 60034-23-2003 旋转电机.第23部分:旋转电机的整修规范Rotating electrical machines - Part 23: Specification for the refurbishing of rotating electricalmachines

IEC/TS 60034-26-2002旋转电机.第26部分:不平衡电压对三相感应电动机性能的

影响

Rotating electrical machines - Part 16: Effects of unbalanced voltages on the performance ofthree-phase induction motors15P;A4

IEC/TS 60071-5-2002 绝缘配合.第5部分:高压直流电流变压器站的工作程序Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converterstations

IEC/TS 60079-27-2002爆炸性气体环境用电气设备.第27部分:场总线内在安全原

理

Electrical apparatus for explosive gas atmospheres - Part 27: Filedbus intrinsically safe concept(FISCO)19P;A4

IEC/TS 60110-2-2000感应加热装置的电力电容器.第2部分:非连接内熔断器的老

化试验、感应试验和要求

Power capacitors for induction heating installations - Part 2: Ageing test, destruction test andrequirements for disconnecting internal fuses31P;A4

（347） 351

IEC标准目录


开本页数

IEC/TS 60695-11-3-2000着火危险试验.第11-3部分:测试火焰.500W火焰.装置和验

证试验方法

Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational testmethods103P;A4

IEC/TS 60695-11-40-2002 着火危险试验.第11-40部:试验火焰.认可试验.指导Fire hazard testing - Part 11-40: Test flames; Confirmatory tests; Guidance35P;A4

IEC/TS 60695-11-4-2000 着火危险试验.第11-4部分:测试火焰.50W火焰.装置和验证

试验方法

Fire hazard testing - Part 11-4: Test flames - 50 W flames - Apparatus and confirmational testmethods

IEC/TS 60695-1-40-2002着火危险试验.第1-40部分:电工产品火灾危险的评估指南.绝缘液体

Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnicalproducts; Insulating liquids53P;A4

IEC/TS 60695-5-2-2002着火危险试验.第5-2部分:着火流出物对财物的腐蚀损失.试验方法的摘要和概述

Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent; Summary and relevanceof test methods53P;A4

IEC/TS 60695-6-2-2001 火灾试验.第6-2部分:烟雾不透明度.试验方法的概要及其相

关方面

Fire hazard testing - Part 6-2: Smoke obscuration; Summary and relevance of test methods49P;A4

IEC/TS 60695-6-31-1999 火灾试验.第6-31部分:浓烟.小型固定试验.材料Fire hazard testing - Part 6-31: Smoke obscuration - Small-scale static test - Materials33P;A4

IEC/TS 60695-7-50-2002着火危险试验.第7-50部分:着火流出物的毒性.毒力的判断.器具和试验

Fire hazard testing - Part 7-50: Toxicity of fire effluents; Estimation of toxic potency; Apparatusand test method43P;A4

IEC/TS 60695-7-51-2002火灾危害试验.第7-51部分:火灾废物的毒性.毒性的评定:试验结果的计算和说明

Fire hazard testing - Part 7-51: Toxicity of fire effluent - Estimation of toxic potency: Calculationand interpretation of test results27P;A4

IEC/TS 60695-8-2-2000 着火危险试验.第8-2部分:放热.试验方法的概要及其相关方

面

Fire hazard testing - Part 8-2: Heat release; Summary and relevance of test methods19P;A4

IEC/TS 60695-9-2-2001 火灾试验.第9-2部分:火焰表面扩散.试验方法的概要及其相

关方面

Fire hazard testing - Part 9-2: Surface spread of flame; Summary and relevance of test methods33P;A4

IEC/TS 60825-6-1999激光产品的安全性.第6部分:排除用于传到人眼的可见信息

光源的产品安全性

Safety of laser products - Part 6: Safety of products with optical sources, exclusively used forvisible information transmission to the human eye21P;A4

IEC/TS 60825-7-2000激光产品的安全性.第7部分:不包括无线"自由空间"数据传

输和观测用的红外光辐射产品的安全

Safety of laser products - Part 7: Safety of products emitting infrared optical radiation, exclusivelyused for wireless "free air" data transition and surveillance21P;A4

IEC/TS 60859-1999额定电压在72.5KV及其以上的气体绝缘金属包覆的开关的

电缆连接.充液和挤压绝缘电缆.充液和干燥型电缆终端

Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV andabove - Fluid-filled and extruded insulation cables - Fluid-filled and dry type cable-terminations31P;A4

IEC/TS 60870-6-602-2001远程控制设备和系统.第6-602部分:与ISO标准和ITU-T推荐

方法一致的远程控制协议.TASE传输轮廓

Telecontrol equipment and systems - Part 6-602: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations; TASE transport profiles28P;A4

（348） 351

IEC标准目录


开本页数

IEC/TS 60871-2-1999额定电压超过1000V的交流电力系统用分路电容器.第2部分:耐久性试验

Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 2:Endurance testing27P;A4

IEC/TS 60919-3-1999 高压直流电(HVDC)系统的性能.第3部分:动力条件Performance of high-voltage direct current (HVDC) systems - Part 3: Dynamic conditions83P;A4

IEC/TS 61000-1-2-2001电磁兼容性(EMC).第1-2部分:总则.电气设备和电子设备在

电磁现象方面达到功能安全的方法论

Electromagnetic Compatibility (EMC) - Part 1-2: General - Methodology for the achievement ofthe functional safety of electrical and electronic equipment with regard to electromagneticphenomena

IEC/TS 61000-6-5-2001电磁兼容性(EMC).第6-5部分:通用标准.发电站抗扰性和分

电站环境

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards; Immunity for power stationand substation environments61P;A4

IEC/TS 61231-1999 国际灯具编码系统(ILCOS)International lamp coding system (ILCOS)43P;A4

IEC/TS 61287-2-2001 安装在铁路车辆板上的电力变换器.第2部分:附加信息技术Power convertors installed on board rolling stock - Part 2: Additional technical information187P;A4

IEC/TS 61312-2-1999雷电电磁冲击防护(LEMP).第2部分:结构和内部粘合结构的

防护屏及接地

Protection against lightning electromagnetic impulse (LEMP) - Part 2: Shielding of structures,bonding inside structures and earthing71P;A4

IEC/TS 61312-3-2000 雷电电磁冲击的防护.第3部分:过电压保护装置的要求Protection against lightning electromagnetic impulse - Part 3: Requirements of surge protectivedevices (SPDs)111P;A4

IEC/TS 61334-5-3-2001使用分配线载波系统的分配自动化.第5-3部分:低层文件.扩展谱带适配的宽带截面

Distribution automation using distribution line carrier systems - Part 5-3: Lower-layer profiles;Spread spectrum adaptive wideband (SS-AW) profile45P;A4

IEC/TS 61334-5-4-2001使用分配线载波系统的分配自动化.第5-4部分:低层轮廓.多载波调制(MCM)轮廓

Distribution automation using distribution line carrier systems - Part 5-4: Lower layer profiles -Multi-carrier Modulation (MCM) profile37P;A4

IEC/TS 61334-5-5-2001使用配线载波系统的分配自动化.第5-4部分:低层轮廓.扩展

谱带快速跳频(SS-FFH)轮廓

Distribution automation using distribution line carrier systems - Part 5-5: Lower layer profiles -Spread spectrum-fast frequency hopping (SS-FFH) profile30P;A4

IEC/TS 61340-5-2-1999 静电学.第5-2部分:电子设备防静电现象防护.用户指南Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - Userguide

IEC/TS 61370-2002 蒸汽汽轮机.蒸汽纯度Steam turbines - Steam purity33P;A4

IEC/TS 61400-13-2001 风力涡轮机发电系统.第13部分:机械荷载的测量Wind turbine generator systems - Part 13: Measurement of mechanical loads69P;A4

IEC/TS 61400-23-2001 风力涡轮发电机系统.第23部分:转式叶片全尺寸结构试验Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades63P;A4

IEC/TS 61463 AMD 1-2000 套管.抗地震能力.修改件1Bushings - Seismic qualification; Amendment 113P;A4

（349） 351

IEC标准目录


开本页数

IEC/TS 61587-3-1999电子设备的机械结构.IEC 60917和IEC 60297试验.第3部分:机壳、支架及辅助框架的电磁屏蔽性能试验

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3:Electromagnetic shielding performance tests for cabinets, racks and subracks11P;A4

IEC/TS 61813-2000 带电作业.带绝缘臂的架空设备的养护、维修和使用试验Live working - Care, maintenance and in-service testing of aerial devices with insulating booms43P;A4

IEC/TS 61873-2001 带有5类以外传输特性的对称二路/四路电缆的工艺水平State of the art for symmetrical pair/quad cables with transmission characteristics beyondcategory 5

IEC/TS 61895-1999 超声学.脉冲式多普勒诊断系统.测定性能的步骤Ultrasonics - Pulsed Doppler diagnostic systems - Test procedures to determine performance32P;A4

IEC/TS 61941-2000 光纤.单模光纤的偏振模式频散测量技术Optical fibres - Polarization mode dispersion measurement techniques for single-mode opticalfibres

IEC/TS 61944-2000 集成电路.生产线认可.展示车辆Integrated circuits - Manufacturing line approval - Demonstration vehicles15P;A4

IEC/TS 61945-2000 集成电路.生产线认可.技术和失败分析方法学Integrated circuits - Manufacturing line approval - Methodology for technology and failure analysis23P;A4

IEC/TS 61956-1999 评价绝缘材料中水份枝状组织的试验方法Methods of test for the evaluation of water treeing in insulating materials61P;A4

IEC/TS 61994-2-2000 频率控制和选择用压电和介电装置.术语.第2部分:压电和介

电过滤器

Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 2:Piezoelectric and dielectric filters

IEC/TS 61994-4-1-2001频率控制和选择用压电和介电装置.术语.第4-1部分:压电材

料.合成石英晶体

Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-1:Piezoelectric materials; Synthetic quartz crystal13P;A4

IEC/TS 62033-2000 光纤中的衰减一致性Attenuation uniformity in optical fibres15P;A4

IEC/TS 62081-1999 电弧焊接设备.安装和使用Arc welding equipment - Installation and use41P;A4

IEC/TS 62098-2000 微处理机仪器的评价方法Evaluation methods for microprocessor-based instruments39P;A4

IEC/TS 62143-2002飞机场的照明和照明标志的电气安装设备.航空地面照明系

统.安全寿命周期研究方法的研发导则

Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lightingsystems; Guidelines for the development of a safety lifecycle methodology25P;A4

IEC/UIC 60050-821-1998 国际电工词汇.第821部分:铁路用信号和安全装置International Electrotechnical Vocabulary - Part 821: Signalling and security apparatus forrailways

QC 001001-1998 电子元器件IEC质量评定体系.基本规则IEC quality assessment system for electronic components (IECQ) - Basic rules41P;A4

QC 001002-1-1998 电子元器件IEC质量评定体系.程序规则.第1部分:管理IEC quality assessment system for electronic components (IECQ) - Rules of procedure - Part 1:Administration23P;A4

（350） 351

IEC标准目录


开本页数

QC 001002-2-1998 电子元器件IEC质量评定体系.程序规则.第2部分:文献工作IEC quality assessment system for electronic components (IECQ) - Rules of procedure - Part 2:Documentation42P;A4

QC 001002-3-1998 电子元器件IEC质量评定体系.程序规则.第3部分:验收程序IEC quality assessment system for electronic components (IECQ) - Rules of procedure - Part 3:Approval procedures112P;A4

QC 001003-1998 电子元器件IEC质量评定体系.指导性文件IEC quality assessment system for electronic components (IECQ) - Guidance documents19P;A4

QC 001005-1998 经IECQ体系(包括ISO 9000)认可的企业、产品和服务的登

记表

Register of firms, products and services approved under the IECQ system, including ISO 9000112P;A4

QC 001006-1998 电子元器件IEC质量评定体系.参加国登记表IEC quality assessment system for electronic components (IECQ) - Register of participatingcountries

（351） 351

Documents

新建 Microsoft Office Excel 工作表 (2)IEC 60044-1-1996 仪表用变压器. 第 1 部分: 电流变压器 Instrument transformers - Part 1: Current transformers 79P;A4 IEC 60044-2