Upload
dodan
View
216
Download
0
Embed Size (px)
Citation preview
www.baymel.com
Pilot Polyester and Prepolymer Reactors
Polyester Polyol Facility
Fully Automated and Closed System
Semi Product FacilityBlended Polyol Facility
POLYURETHANE SYSTEMS
baymel
IND
EX
Şirket Profili / Company Profile
ARGE / R & D
Sert Köpük Poliüretan Sistemler / Rigid Polyurethane Systems
Buzdolabı Sistemler / Appliance Systems
Sandviç Panel Sistemler (Continuous Sistemler) / Metal Faced Systems
Soğuk Oda Paneli (Discontinuous Sistemler) / Cold Room Systems
Püskürtme Köpük (Sprey) Sistemler / Spray Systems
Tahta Taklidi ve Mobilya Dekoratif Sistemler / Wood-imitation and Furniture Decorative Systems
Diger Sert Köpük Uygulamaları / 0ther Specific Rigid Application
Terlik – Taban Poliüretan Sistemler / Shoe – Soles Polyurethane Systems
Terlik Poliüretan Sistemler / Slipper Polyurethane Systems
Taban Poliüretan Sistemler / Soles Polyurethane Systems
Sert Yazlık, Fusbet, is Güvenligi Poliüretan Sistemler / Hard Soles, Fussbett, Safety Shoes Polyurethane Systems
Poliürea Sistemler / Polyurea Systems
Yarı Mamüller / Semi – Finished Product
Hammaddeler / Raw Materials
03
04
05
06
07
08
09
11
12
14
15
16
17
18
20
21
www.baymel.com
Vizyon
2015 yılında hedeflediğimiz yakın doğu ve orta doğu pazarların da en iyi poliüretan sistem tedarikçisi olmakla
ile beraber hedeflediğimiz nish ürünler ile ülkemize katma değeri yüksek sistemler geliştirmek.
Misyon
Müşterilerimiz, çalışanlarımız , ortaklarımız ve tüm paydaşlarımız için beklentilerinin ötesinde değer yara-
tan bir sistem evi ( system house) olmak.
Vision
Developing high value-added systems for our country with the nish products we aim and aiming to be the best
polyurethane system supplier in the Near East and the Middle East markets in 2015.
Mission
Our mission is to be a system house that creates values beyond the expectations of our customers, employees,
shareholders and all of our stakeholders.
02
Sirket Profili / Company Profile2011 yılının başında 5000 m2 kapalı alanda 10 000 ton baz poli-ester poliol, 8000 ton prepolimer, 15000 ton formüle edilmiş pol-yol yıllık kapasitesi ile üretime başlayan BAYMEL , 2013 yılının son çeyreğinde yaptığı yatırımlarla 7000 m2 kapalı alana çıkarak 13000 ton baz poliester poliol, 9500 ton prepolimer , 18000 ton formüle edilmiş poliol kapasitesi ve son teknoloji tamamı kapalı sistem üretim hattı ile terlik-taban ve sert köpük (rijit) sektörleri için üre-time başlamıştırŞirketimizde kaliteli ürün üretmenin ötesinde sürdürülebilir kalkınmanın temel ilkelerinden olan çevreyi koruma, iş sağlığı ve güvenliği yönetimi anlayışını benimsemektedir. Bu anlayış doğal kaynakların ve enerjinin kullanımı atıkların etkin yöneti-mi, emisyonların izlenmesi çevreye uyumlu ürün ve teknoloji geliştirilmesiyle ilgili ARGE projeleri hedefleri gibi faaliyetlerimizle desteklenmektedir.
BAYMEL began production with 10.000 tons of polyester base pol-yol , 8000 tons of prepolymer and 15000 tons of formulated polyol annual capacity in an area of 5000 m2. With the investments have been maden in the last quarter of 2013, Baymel started the produc-tion of shoe soles and rigid foam systems by reaching a 7000 m2 closed area, 13000 ton base polyesther polyol 9500 ton prepoly-mer, 18000 ton formulated polyol capacity and high technology fully closed system production line. Beyond producing high quality products in our company, environ-mental control, one of the main principles of sustainable develop-ment, adopts the occupational health and safety management ap-proach. This approach is supported with our activities such as R&D project goals that are about the use of natural resources and en-ergy, the effective management of waste, the monitoring of emis-sions, and developing environmentally compatible products and technologies. 03
AR-GE / R & D
Poliüretan sektörü, dünyada kimyasallar kategorisinde en hızlı büyüyen sektörlerin başında gelmektedir. Bu alanda yaptığımız ve yapmaya devam ettiğimiz çalışmalar ve yatırımlar ile ülkemizin bu ithalat kaleminde dışa bağımlılığını azaltarak katma değer sağlayan nish ürünler Ar-Ge çalışmalarımızın odağındadır.
Bu bağlamda bilim insanları ve çeşitli insanları ve çeşitli kamu kurumları ile ortak yürüttüğümüz Ar-Ge projeleri büyümemizin te-melinde yer almaktadır.
Şirketimizde kaliteli ürün üretmenin ötesinde sürdürülebilir kalkınmanın temel ilkelerinden olan çevreyi koruma, iş sağlığı ve güvenliği yönetimi anlayışını benimsemektedir. Bu anlayış doğal kaynakların ve enerjinin kullanımı atıkların etkin yöneti-mi, emisyonların izlenmesi çevreye uyumlu ürün ve teknoloji geliştirilmesiyle ilgili ARGE projeleri hedefleri gibi faaliyetlerimizle desteklenmektedir.
BAYMEL halihazırda üretimini gerçekleştirdiği terlik - taban, rigid ve polyurea sistemlerinde ortaya koyduğumuz faydalar ile pazarda ki rakip ürünlere kıyasla yenilikler sunması daimi hedefimizdir.
The polyurethane system is the leading sector in the world’s fast-est-growing category of chemicals. With the studies and invest-ments that we have made and continue to make in this area, it is our R&D studies’ main focus to provide nish products that provide added value by reducing our country’s dependence on import in this field.
In this context, the R&D projects that we conduct jointly with sci-entists, various people and various public institutions are the heart of our growth.
Beyond producing high quality products, our company adopts the environmental control, occupational health and safety man-agement approach, which are the main principles of sustainable development. This approach is supported with our activities such as R&D project goals that are about the use of natural resources and energy, the effective management of waste, the monitoring of emissions, and developing environmentally compatible products and technologies.
With the benefits that we have put forth in the current production of slipper-sole, rigid and polyurea systems as Baymel, our perma-nent goal is to be offering innovations when compared to compet-ing products in marketing.
04
Sert Köpük Poliüretan Sistemler / Rigid Polyurethane SystemsAna kullanım amacı izolasyon (yalıtım) olan poliüretan sistemlerdir. Farklı reaksiyon profillerinde ve proses koşullarında çalıştırılabilen çeşitli yoğunlukta ve çeşitli şişirici gazların kullanıldığı sistemlerdir.Poliol sistem ve polimerik izosiyanat (PMDI) karışımı, bir şişirici yardımıyla genleşerek sert bir köpük oluşturur. Oluşan köpük hücrelerinin %90-95 i kapalı ve serttir. İsmini de bundan almaktadır. İyi bir ısı tutucudurlar. Bundan dolayı sert köpük sistemler ısı yalıtımı amacıyla kullanılan ve dünyanın şuan için en iyi yalıtım malzemesidir.
Isı iletim katsayısı ( ) hücre boyutu, kapalı hücre oranı, basma dayanımı, boyutsal kararlılık ve yanmazlık derecesi gibi mühteşem özellikler-inden ötürü dünyada tüketimi hızla artan bir hammadde türüdür.
Genel olarak sert köpüklerin teknik değerleri aşağıda ki gibidir;
These polyurethane systems are used for insulation. These sys-tems that maintain the usage of various density and various blow-ing agent that can work in different reaction profiles and process conditions.The mixture of polyol system and polymeric isocyanate (PDMI) forms rigid foam by expanding with the help of a blowing agent. 90-95% of the foam cells that are formed are closed and rig-id. This is where it gets its name. They are good heat insulators. This is why rigid systems are insulation materials used for heat insula-tion and currently the best in the world.
It is a raw material type whose consumption is rapidly growing in the world due to its great features such as heat transmission coef-ficient ( ), cell size, closed cell rate, compressive strength, dimen-sional stability and degree of flammability.Generally, rigid foams’ technical values are as follows:
Feature Unit Values TestDensityCompression StrengthFlexibility StrengthWater Absorption in 24 hoursFlammability ClassClosed Cell RateThermal Conductivity
kg/m³N/mm²N/mm²% (v/v)DIN 4102%W/mK
30-500.15-0.350.40-0.551.2-2.5B1 - B2 - B390-950.0121 - 0.033
DIN 53420DIN 53421DIN 53423DIN 53433DIN 4102 DIN 52612
05
Buzdolabı Sistemler / Appliance Systems
Ürün / Item
Görünüş / Appearance
Yoğunluk / Density ( g / cm³, 25 C )
Viskozite / Viscosity (mPa.s , 25 C)
Şişirici Ajan / Blowing agent
El KarışımıHand Mix
Ürün Tanımı Product Description
BYM RIG APP Serisi çeşitli şişiricili sistemler için tasarlanmış polyol karışımıdır. Buzdolabı ve soğutucu sektörlerinde kullanılır.ISO NAT 200 ( PMDI-ISO) ile reaksiyona tabi tutuldugunda mükemmel basma dayanımı, boyutsal kararlılık, termal iletkenlik değerlerine sahip ürünler oluşur.Sadece BYM RIG APP-N serisi şişirici ajan içerir.
BYM RIG APP Series blended polyols are designed to be used with variable blowing agent. It is used for manufacture of refrigera-tor and freezer. The manufactured foam has excellent compressive strength, dimensional stability and thermal conductivity when reacts with ISO NAT 200 ( PMDI-ISO). Only BYM RIG APP -N series blended Polyols contain blowing agent.
Polyol ve İzosiyanat Sıcaklıkları / Temp. Polyol and Isocyanate, C
Karışım oranı / Mixing Ratio of Polyol : Iso:Blowing agent, w/w/w
Karışım Süresi / Mixing Time , sec.
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
BYM RIG APP-B Series
Açık sarı / Light Yellow
1,07 0,1
300 100
HCFC 141 b
20 1
100 : 120-140:20
6 - 8
14 4
80 20
110 20
25 2
+-
+-
+-+-
+-
+-
+-
+-+-+-
+-
BYM RIG APP-C Series
Açık sarı / Light Yellow
1,07 0,1
4000 500
Cyclopentane
20 1
100 : 120-140:14
6-8
14 4
80 20
110 20
25 2
BYM RIG APP-N Series
Açık sarı / Light Yellow
1,05 0,1
1600 200
New generation Blowing agent
20 1
100 : 120: -
6 - 8
14 4
80 20
110 20
25 2
www.baymel.com
06
+-
+-
+-
+-
+-+-
+-
+-
+-
+-
Sandviç Panel Sistemler (Continuous Sistemler) / Metal Faced Systems
Ürün / Item
Görünüş / Appearance
Yoğunluk / Density ( g / cm³, 25 C)
Viskozite / Viscosity (mPa.s , 25 C)
Şişirici Ajan / Blowing agent
El KarışımıHand Mix
Ürün Tanımı Product Description
BYM RIG MF Serisi çeşitli continuous makineler için tasarlanmış polyol karışımıdır. Makine özelliklerine göre additive, catalyst dışarıdan verilebilir.Sandviç panel sektöründe kullanılır. ISO NAT 200 ( PMDI-ISO) ile reaksiyona tabi tutuldugunda mükemmel basma dayanımı, boyutsal kararlılık, termal iletkenlik değerlerine sahip ürünler oluşur.B1 ve B2 yanmazlık sınıfında (DIN 4102) ürünlerimiz mevcuttur. Reaksiyon süreleri ve polyol tasarımı makine özelliklerine göre tarafımızdan tasarlanacaktır.
BYM RIG MF Series blended polyols are designed to be used with variable continuous machines. It is used for manufacture of sand-wich panel. The manufactured foam has excellent compressive strength, dimensional stability and thermal conductivity when reacts with ISO NAT 200 ( PMDI-ISO). Our products are in the B1 and B2 flammability class according to the DIN 4102 standard.The catalyst and additive quantities will be adjusted according to the continuous line properties and if necessary the polyol blend will be formu-lated again.
Polyol ve İzosiyanat Sıcaklıkları / Temp. Polyol and Isocyanate, C
Karışım oranı / Mixing Ratio of Polyol:Iso:Catalyst:Additive:Blowing agent w/w
Karışım Süresi / Mixing Time , sec.
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
BYM RIG MF-B Series
Açık sarı / Light Yellow
1,06 0,1
2000 200
HCFC 141 b
25 1
100 : 150 : 1,5-2,5: 1-2: 14-16
6-8
17 4
28 5
55 10
30 2
BYM RIG MF-P Series
Açık sarı / Light Yellow
1,07 0,1
1600 200
N-Pentane
25 1
100 : 150 : 1,5-2,5:1-2:5-8
6-8
17 4
28 5
55 10
30 2
www.baymel.com
+-
+-
+-
+-+-
+-+-
+-+-
+-
+-+-
+-+-
07
Soguk Oda Paneli (Discontinuous Sistemler) / Cold Room Systems
Ürün / Item
Görünüş / Appearance
Yoğunluk / Density ( g / cm³, 25 C )
Viskozite / Viscosity (mPa.s , 25 C)
Şişirici Ajan / Blowing agent
Karışım oranı / Mixing Ratio of Polyol : Iso
Kalıp Sıcaklığı / Module Temperature C
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
Ürün Tanımı Product Description
BYM RIG CR Serisi discontinuous makineler için tasarlanmış polyol karışımıdır. Soğuk oda paneli sektöründe kullanılır. ISO NAT 200 ( PMDI-ISO) ile reaksiyona tabi tutuldugunda mükemmel basma dayanımı, boyutsal kararlılık, termal iletkenlik ve yüzeye iyi yapışma değerlerine sahip ürünler oluşur.BYM RIG CR-N serisi yeni nesil şişirici ajandan kullanılarak tasarlanmış polyol karışımıdır. Çevre dostu ürünlerdir.
BYM RIG CR Series blended polyols are designed to be used with discontinuous machines. It is used for manufacture of cold room panel. The manufactured foam has excellent compressive strength,dimensional stability,thermal conductivity and good adhesion to various surfaces when reacts with ISO NAT 200 ( PMDI-ISO). BYM RIG CR-N series are designed as new generation environment friendly system.
BYM RIG CR-B
Açık sarı / Light Yellow
1,06 0,1
600 100
HCFC 141 b ( Polyol don’t contain HCFC 141 b)
100:110-120 Ağırlıkça / By Weight
40-45
17 4
110 20
200 20
30 3
+-
+- +-
+-
+-
+-
+-
+-
+-
+-
+-
+-
BYM RIG CR-N
Açık sarı / Light Yellow
1,05 0,1
1200 200
New Generation Environment Friendly Gas
100:110-120 Ağırlıkça / By Weight
40-45
17 4
110 20
200 20
30 3
www.baymel.com
08
Püskürtme Köpük (Sprey) Sistemler / Spray Systems
Ürün / Item
Görünüş / Appearance
Yoğunluk / Density ( g / cm³, 25 C )
Viskozite / Viscosity (mPa.s , 25 C)
Şişirici Ajan / Blowing agent
Yanmazlık Sınıfı / Flammability class, DIN 4102
Karışım oranı / Mixing Ratio of Polyol : Iso
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
Ürün Tanımı Product Description
BYM RIG SP Serisi püskürtme makineleri için tasarlanmış polyol karışımıdır.Sprey uygulamlarında kullanılır. BYM RIG SP serisi yeni nesil şişirici ajanlar kullanılarak tasarlanmış polyol karışımıdır. . ISO NAT 200 ( PMDI-ISO) ile reaksiyona tabi tutuldugunda mükem-mel boyutsal kararlılık ve termal iletkenlik değerlerine sahip ürünler oluşur.Çevre dostu ürünlerdir.
BYM RIG SP Series blended polyols are designed to be used with spray machines. It is used for spray application. The manufactured foam has excellent dimensional stability and thermal conductivity when reacts with ISO NAT 200 ( PMDI-ISO) BYM RIG SP series are designed as new generation environment friendly system.
BYM RIG SP1328
Açık sarı / Light Yellow
1,05 0,1
1200 200
New Generation Environment Friendly Gas
B2
100:110( Hacimce / by Volume)
5 1
8 1
11 1
30 2
+-+- +-
+-
+-
+-
+-
+-
+-
+-
+-
+-
BYM RIG SP1336
Açık sarı / Light Yellow
1,05 0,1
1300 200
New Generation Environment Friendly Gas
B2
100:110 ( Hacimce / by Volume)
5 1
8 1
11 1
36 2
www.baymel.com
09
Püskürtme Köpük (Sprey) Sistemler / Spray SystemsÜrün / Item
Görünüş / Appearance
Yoğunluk / Density ( g / cm³, 25 C )
Viskozite / Viscosity (mPa.s , 25 C)
Şişirici Ajan / Blowing agent
Yanmazlık Sınıfı / Flammability class, DIN 4102
Karışım oranı / Mixing Ratio of Polyol : Iso:
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
Ürün Tanımı Product Description
BYM RIG SPB1 Serisi püskürtme makineleri için tasarlanmış polyol karışımıdır.Sprey uygulamlarında kullanılır. BYM RIG SP serisi yeni nesil şişirici ajanlar kullanılarak tasarlanmış polyol karışımıdır. . ISO NAT 200 ( PMDI-ISO) ile reaksiyona tabi tutuldugunda mükemmel boyutsal kararlılık, yanmazlık ve termal iletkenlik değerlerine sahip ürünler oluşur.Çevre dostu ürünlerdir.
BYM RIG SPB1 Series blended polyols are designed to be used with spray machines. It is used for spray application. The manufac-tured foam has excellent dimensional stability non flammability and thermal conductivity when reacts with ISO NAT 200 ( PMDI-ISO) BYM RIG SP series are designed as new generation environment friendly system.
BYM RIG SPB11332
Açık sarı / Light Yellow
1,05 0,1
1200 200
New Generation Environment Friendly Gas
B1
100:150( Hacimce / by Volume)
5 1
8 1
11 1
32 2
+-+- +-
+-
+-
+-
+-
+-
+-
+-
+-
+-
BYM RIG SPB11338
Açık sarı / Light Yellow
1,05 0,1
1300 200
New Generation Environment Friendly Gas
B1
100:150 ( Hacimce / Volume)
5 1
8 1
11 1
38 2
www.baymel.com
10
Tahta Taklidi ve Mobilya Dekoratif Sistemler Wood-imitation and Furniture Decorative Systems
Ürün / Item
Görünüş / Appearance
Yoğunluk / Density ( g / cm³, 25 C )
Viskozite / Viscosity (mPa.s , 25 C)
Karışım oranı / Mixing Ratio of Polyol : Iso
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
Ürün Tanımı Product Description
BYM RIG WI90 Serisi mobilya sektöründe tahta tahliti parçalarının üretimi için tasarlanmış polyol karışımıdır.Düşük viskozite değerinden ötürü elle de dökümde yapılabilir.Reaksiyon neticesinde düşük ısı çıkmasından ötürü silikon kalıplarda kolaylıkla kullanılır.
BYM RIG WI Series blended polyols are designed to be used for furniture industry . Because of the low viscosity ıt can be casted by hand mix. Because of the low heat generation during the reaction ıt can be easly used in the silicone moulds.
BYM RIG WI90
Açık sarı / Light Yellow
1,05 0,1
800 200
100:60 (Ağırlıkça / by weight)
25 3
70 3
120 3
90 2
+-+-
+-
+-
+-
+-
www.baymel.com
11
Diger Sert Köpük Uygulamaları / 0ther Specific Rigid Application
www.baymel.com
Ürün Tanımı Product Description
Güneş enerjisi ile ısı sistemlerinde kullanılır. BYM RIG SE Series is used in the solar systems.
Termal ısı yalıtım borularında kullanılır. BYM RIG FR series is used for the insulation of thermal pipes.
Frigrofik kasa imalatında kullanılır. BYM RIG PIP series is used for the isolated truck containers.
Güneş Enerji Sistemleri ve Boyler
Solar Energy Systems and Boiler
BYM RIG SE Series
New Generation Environment Friendly Gas
100:100 (Ağırlıkça / by weight)
38 3
145 3
195 3
32 2
+-+-+-+-+-
+-
+-
+-
Frigofrik kasa, Mobo Kabin Sistemleri
Refrigerated box, Mobo Cabin Systems
BYM RIG FR Series
New Generation Environment Friendly Gas
100:120 (Ağırlıkça / by weight)
43 3
150 3
220 3
36 2
Ürün / Item
Şişirici ajan / Blowing agent
Karışım oranı / Mixing Ratio of Polyol:Iso
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
Sektör / Industry
12
+-
+-+-
+-
Boru - Tank İzolasyonu
Pipe-Tank Insulation
BYM RIG PIP Series
New Generation Environment Friendly
Gas
100:160 (Ağırlıkça / by weight)
38 3
160 3
230 3
41 2
Diger Sert Köpük Uygulamaları / 0ther Specific Rigid Application
www.baymel.com
Ürün Tanımı Product Description
Dolgulu panellerin üretiminde EPS yada taş yününü galvaniz saç, aliminyum vb. yüzeylere yapışmasında kullanılır. Reaksiyon profili makine özelliklerine göre ayarlanır. BYM RIG ADH series is used to produce filled panel and to adhere EPS or rock wool.The reaction profile of the system can be adjusted according to the properties of the production line.
Düşük yoğunlukta esnek yapıya sahip ve darbe emici özelliğinden ötürü ambalaj sektöründe kullanılır. Because of its low density ;flexible struc-ture and schock absorption properties is suitable for the packing of special devices.
Panjur ve kepenk sistemlerinde ısı izolasyonunu saplamak ve mukavemeti arttırmak için kullanılır.Reaksiyon profili hattın özelliklerine göre tasarlanır. BYM RIG SH series is used to im-prove the heat insulation and com-pression resistance of the shutters and steel door panels.The reaction profile of the system can be ad-justed according to the properties of the production line.
Eps - Taş Yünü Yapıştırıcısı
Eps – Rock Wool Adhesive
BYM RIG ADH Series
New Generation Environment Friendly Gas
100:120 (Ağırlıkça / by weight)
12 3
30 3
45 3
38 2+-
+-
+-
+-
Panjur, Çelik Kapı Sistemler
Shutters and Steel Door Systems
BYM RIG SH Series
New Generation Environment Friendly Gas
100:160 (Ağırlıkça / by weight)
9 3
19 3
23 3
50 2
Düşük Yoğunluk Ambalaj Köpüğü
Low-density Packaging Foam
BYM RIG PAC Series
Su bazlı / Water based
100:100 (Hacimce / by volume)
9 3
23 3
45 3
9 2
Ürün / Item
Şişirici ajan / Blowing agent
Karışım oranı / Mixing Ratio of Polyol:Iso
Cream Time, sec.
Gel Time, sec.
Tack Free Time, sec.
Serbest Yoğunluk / Free Rise Density, Kg / m³
Sektör / Industry
+-+-+-+-
+-
+-+-
+-
13
Terlik – Taban Poliüretan Sistemler / Shoe – Soles Polyurethane Systems
Baymel poliüretan ayakkabı sektörüne; Müşteri beklentilerine ve makine çeşitliliğine göre ( döküm yada direk enjeksiyon) 25 density den 100 densitye kadar farklı uygu-lama alanları için çeşitli fiziksel özelliklerde ürünler sunmaktadır.
Müşterilerinin isteklerine göre sürekli özel poliüretan sistemler geliştiren BAYMEL poliüretan genel olarak ayakkabı sektörü için ürünleri aşağıdaki gibi sınıflandırılabilir;
1- Düşük density terliklik2- Pandofluk yumuşak tabanlık3- Sandelet terliklik4- Zenne terliklik5- Halı terliği ( ev içi terlik)6- Baharlık Taban7- Lightwinter Taban8- Kışlık Taban9- 100 density Compact taban10- Çift yada tek density tabanlık (iş güvenliği)11- TPU / PU ara taban poliüretan
BAYFOOT Poliüretan Sistemleri üç ana bileşenden oluşmaktadır:A komponenti: Farklı OH sayılarında ester bazlı formüle edilmiş doymuş poliester poliollardır.A1 komponenti: Katalist ve Katkı maddeleri.B komponenti: MDI bazlı çeşitli NCO değerlerinde prepolimerlerdir.
For the shoe sector, Baymel Polyurethane offers products with various physical features for different fields of application from 25 to 100 densities according to consumer expectations and machine variety (molding or direct injection)
For the shoe soles sector, the general products of Baymel Polyurethane, who constantly develops special polyurethane systems according to customers’ requests, can be classified as follows:
1- Low density slipper 2- Soft sole for panduff3- Sandal slipper 4- Women’s slipper 5- Carpet slippers (house slippers)6- Spring sole7- Lightwinter sole8- Winter sole9- 100 density compact sole10- Double or single density sole (work safety)11- TPU / PU midsole polyurethane
BAYFOOT Polyurethane Systems are formed by three main components:A component: Saturated polyester polyols that are ester-base formulated in different OH numbers.A1 component: Catalyst and additivesB component: MDI based prepolymers at various NCO values.14
+-+-+-
+-+-
+-+-
+-+-+-
+-+-
+-+-
+-
+-+-
+-+-+-
Slipper
BYM FW 203 Series
100:120 (Ağırlıkça / by weight)
8 2
17 3
23 3
0,20 0,015
0,30 0,2
120 10
67 3
Low Density Slipper
BYM FW 206 Series
100:120 (Ağırlıkça / by weight)
8 2
16 3
21 3
0,19 0,015
0,28 0,2
110 10
70 3
Soft and High Flex Slipper Systems
BYM FW L 300 Series
100 : 88-115 (Ağırlıkça / by weight)
8 2
18 3
24 3
0,21 0,015
0,32 0,2
130 10
45 - 60
Sektör / Industry
Ürün / Item
Karışım oranı / Mixing Ratio of Polyol:Iso
Cream Time, sec.
Gel Time, sec.
Ele yapışmama / Take Free Time, sec
Serbest Yoğunluk / Free Rise Density, gr/
cm³
Kalıp Yoğunluğu / Moulded Density, gr/ cm³
Kalıp Açma Süresi / Demoulding Time , sec
Sertlik / Hardness, Shore A
Terlik Poliüretan Sistemler / Slipper Polyurethane Systems
www.baymel.com
15
Taban Poliüretan Sistemler / Soles Polyurethane Systems
www.baymel.com
+-+-+-
+-+-
+-+-
+-
+-+-
+-+-+-+-
Spring
BYM FW 204 Series
100:10-116 (Ağırlıkça / by weight)
7-9
15-17
24- 28
0,22 -0,24
0,35 - 0,42
190-220
60 - 67
Light Winter
BYM FW 205 Series
100:116 (Ağırlıkça / by weight)
8 2
16 3
24 3
0,25 0,015
0,40 0,45
210 230
67 3
Winter
BYM FW 700 Series
100 : 84 (Ağırlıkça / by weight)
8 2
18 3
24 3
0,30 0,015
0,50 0,5
270 10
55 3
Sektör / Industry
Ürün / Item
Karışım oranı / Mixing Ratio of Polyol:Iso
Cream Time, sec.
Gel Time, sec.
Ele yapışmama / Take Free Time, sec
Serbest Yoğunluk / Free Rise Density, gr/ cm
Kalıp Yoğunluğu / Moulded Density, gr/ cm
Kalıp Açma Süresi / Demoulding Time , sec
Sertlik / Hardness, Shore A
3
3
16
Sert Yazlık, Fusbet, is Güvenligi Poliüretan Sistemler Hard Soles, Fussbett, Safety Shoes Polyurethane Systems
www.baymel.com
+-
+-
+-
+-
+-
+-
+-+-+-+-
+-
+-
+-
Hard Summer
BYM FW 400 Series
100:120-130 (Ağırlıkça / by weight)
7 - 9
16 3
24 3
0,23 - 0,24
0,38 - 0,42
190-220
83 - 88
Safety Shoes
BYM FW 600 Series
100:90 (Ağırlıkça / by weight)
8 2
16 3
24 3
0,25 0,015
0,40 - 0,50
230 - 250
55 - 65
Fussbett ( in sole )
BYM FW 803 Series
100 : 45 (Ağırlıkça / by weight)
7 2
11 2
17 2
0,10 0,015
0,17 0,2
150 10
15 3
Sektör / Industry
Ürün / Item
Karışım oranı / Mixing Ratio of Polyol:Iso
Cream Time, sec.
Gel Time, sec.
Ele yapışmama / Take Free Time, sec
Serbest Yoğunluk / Free Rise Density, gr/ cm
Kalıp Yoğunluğu / Moulded Density, gr/ cm
Kalıp Açma Süresi / Demoulding Time , sec
Sertlik / Hardness, Shore A
3
3
17
Poliürea Sistemler / Polyurea Systems
Poliürea, bir diizosiyanat (NCO-R-NCO) ile bir polyaminin (NH2-R-NH2) reaksiyonu sonucu, bir katalizör ve ek bir çapraz bağlayıcı ile, genellikle sprey yardımıyla 1:1 oranında karışımı ile oluşan sıkı yapıda ve su dayanımı yüksek olan bir elastomer türüdür.Avrupa’da %70 oranında poliürea içeren karışımlar ‘polyure’ kapsamı altına alınmaktadır.Aromatik ve alifatik olmak üzere iki çeşit polyurea sistemler vardır.
“Aromatik“ SistemlerBunlar, bir aromatik diizosiyanat (örneğin MDI, TDI gibi) ve polyamin içeren sistemlerdir. Mekanik ve ısıl dayanımları mükemmel ama spektroskopik dayanımları düşüktür. Bu güneş ışığında yüzeyleri renk değiştirir.
“Alifatik“ SistemlerBunlar, bir alifatik diizosiyanat (IPDI, HDI gibi) ve polyamin içeren sistemlerdir. Spektroskopik dayanımları yüksektir. Yani ışığa (güneş ya da yapay) maruz kaldığında rengini değiştirmezler. Alifatik sistemleri işlemek daha zordur. Bunların ürünleri yüksek maliyetlidir.
Poliürea’larin avantajları;• VOC içermez, formülasyonları geliştirilebilir ve kokusuzdurlar• Proses sıcaklıkları -30°C - +60°C arasında olmalıdır.• Hızlı reaksiyon gerçekleştirirler, 1 saat sonra bile uygulanan yüzey kullanılabilir.• 130°C’ ye kadar mükemmel, 220°C’dede kısa süreli ısıl direnç sağlar• UV dayanımı poliüretanlara göre çok daha iyidir.• Su geçirmezdir ve hidrolize karşı dayanıklıdır.• Esnektir.• Elastiktir.• Her hangi bir kalınlıkta uygulanabilir.• Kuru ve temizlenmiş yüzeylere mükemmel yapışma sağlar ama nemli yüzeylerde makul bir yapışma gösterir.• Mükemmel kimyasal dirence sahiptir.• Düşük viskoziteleri nedeni ile basit makinalarda bile işlenebilir.
Sertlik (ISO 868-2003, 20°C): 90 Shore D – 50 Shore DÇekme Dayanımı (ISO 37-2005): 10 – 30 MPaUzama (ISO 37-2005): 200 – 600 %Geri tepme (ISO 4662-2009): > 30%Yırtılma Direnci (ISO 34-1 method A): > 40 N/mmAşınma Kaybı (DIN ISO 4649): < 100 mm³
18
Polyurea is a type of elastomer with high water resistance, formed as a result of a diisocyanate (NCO-R-NCO) and a polyamine’s reaction with a catalyst or an addi-tional cross-linker, generally to give a mixing ratio of 100:100 by volume.In Europe, mixtures containing 70% of polyurea are included in the scope of “pol-yurea”.There are two types of polyurea systems. These are aromatic and aliphatic.
“Aromatic” Systems
These are systems than contain an aromatic diisocyanate (such as MDI, TDI etc.) and polyamine. Their mechanical and heat resistances are excellent but their spectroscopic resistance is low. Their surfaces change color in sunlight.
“Aliphatic” Systems
These are systems that contain an aliphatic diisocyanate (IPDI, HDI etc.) and poly-amine. Their spectroscopic resistance is high. So when they are exposed to light (sun or artificial), they don’t change color. Aliphatic systems are harder to process. The products of these systems have high prices.
Advantages of Polyurea
• Doesn’t contain VOC, develops formulations, odorless• Process temperatures can be -30°C - +60°C, even in high humidity conditions• Performs fast reactions, the receiving surface can be used even 1 hour later• Provides excellent heat resistance up till 130°C, and short term at 220°C• Provides excellent adhesion to dry and clean surfaces- but reasonable adhesion to moisturized surfaces • Can be processed even in simple machines due to its low viscosities• UV stability is better when compared to polyurethane• Waterproof and hydrolysis stable• Flexible• Elastic• Can be applied at any thickness• Excellent chemical resistance
Hardness (ISO 868-2003, 20°C): 90 Shore D – 50 Shore DTensile Strength (ISO 37-2005): 10 – 30 MPaElongation (ISO 37-2005): 200 – 600 %Rebound (ISO 4662-2009): > 30%Tear Resistance (ISO 34-1 method A): > 40 N/mmAbrasion Loss (DIN ISO 4649): < 100 mm³
Performance
Chemical Resistance
Polyurea - Bayurea
Polyurea - Bayurea
Polyurethane
Polyurethane
Polyester
Polyester
Epoksi
Epoksi
Vinil Ester
Vinil Ester
Akrilik
Akrilik
Fiziksel güç / Physical resistance
Uzama / Elongation
Darbe dayanıklılığı / Shock Absorption
Aşınma dayanıklılığı /Abrasion resistance
Yapışma / Bonding
Kürlenme / Curing time
Geçirgenlik / permeability
UV dayanıklılığı / UV Resistance
Sıcaklık limiti / Temperature limit
Mineral asitler / Mineral Acids
Organik asitler / Organic Acids
Alkaliler / Alkalies
Klorlanmış çözücüler/ Chlorinated
Oksijenlenmiş çözücüler / oxidated
Hidrokarbon çözücüler / hydrocarbon
Tuzlar / Salts
Su / Water
Medium-High
Low-Medium
Medium-High
Medium-High
Low-Meidum
High
Low-Medium
High
Medium
Medium
Medium
High
Low-Medium
Low-Medium
Low-Medium
High
Medium-High
High
Low
Medium
Medium-High
Medium
High
Low
Medium
Medium-High
Medium-High
High
High
Medium-High
Medium-High
Medium-High
High
Medium-High
High
Low
Medium
Medium-High
High
Low
Low
Low
Medium-High
Medium-High
Medium
High
Low - High
Low - High
Medium-High
High
Medium-High
High
Low
Medium
Medium-High
Medium
High
Low
Medium-High
Low-Medium
Medium-High
High
Medium
Low - High
Low - High
Medium-High
High
Medium-High
Low-Medium
High
Medium-High
Medium-High
Low-Medium
Low
Medium-High
Low - High
Medium
Low-Medium
Low-Medium
Low-Medium
Low-Medium
Low-Medium
Low-Medium
Medium-High
Low - High
Low - High
High
High
High
Low - High
Low
Low
Medium
Low - High
Low-Medium
Medium
Medium-High
Low-Medium
Low-Medium
Low-Medium
High
High
19
Yarı Mamüller / Semi – Finished Product
Saturated Polyester Resin
MDI Based Prepolymers
TDI Based Prepolymers
cP ± 50 at 40 °C
cP at 80 °C
NCO ± 0.5
NCO ± 0.25
Doymus Aromatik ve Alifatik Poliester Reçine / Saturated Aromatic and Aliphatic Polyester Resin
Prepolimerler / Prepolymers
PES 1000 PES 2000 PES 25411 PES 2500 PES 240110 ± 3.0 mg KOH/g
≤0.05
850 ± 150 mPas
0.1-1.0 mg KOH/g
18.6
20.02
23.03
15,5
3,2
3,75
4,15
4,5
5,75
56 ± 3.0 mg KOH/g
≤0.05
1500 ± 250 mPas
0.1-1.0 mg KOH/g
650
350
325
800
1200 – 1700
1250 - 1450
950 - 1500
850 - 1400
750 - 1250
63 ± 3.0 mg KOH/g
≤0.05
3000 ± 250 mPas
0.1-1.0 mg KOH/g
47 ± 3.0 mg KOH/g
≤0.05
3250 ± 250 mPas
0.1-1.0 mg KOH/g
240 ± 10.0 mg KOH/g
≤0.05
965 ± 250 mPas
< 0,1 mg KOH/g
OH number
Water %
Viscosity (50°C)
Acidity
Isonat 18
Isonat 20
Isonat 23
Isonat 15
Isonat T32
Isonat T37
Isonat T41
Isonat T45
Isonat T57
20
Hammaddeler / Raw Materials
Polyols Description Oh Value mgKOH/g Viskosity 25C mPas Functionality
BAY PE 90
BAY PE 70M
BAY PE 07
BAY PE 81
BAY PE 310
BAY PE 45
BAY PE 220
Sorbital based general purpose polyol
Manik based general purpose polyol
Gliserol based triol poliol
High moleculer weight triol
For Elastomer and adhesive industry 1000 moleculer weight triol
Co-polymer polyol (polimerik polieter poliol)
2000 moleculer weight diol
475-500
450-500
225-255
25-30
155-175
27-33
54-57
9000-11000
28000-36000
250-400
1000-1300
130-190
4000-6500
300-420
4,75-4,95
3
3
3
3
3
2
Üretimini yaptığımız poliüretan sistemlerin üretiminde kullandığımız ve sürekli de-pomuzda hazır bulunan Mono Etilen Glikol, Di Etilen Glikol, Adipik Asit,Ftalik Anhidrid, Polieter Polioller, Alev geciktiriciler (TCPP), Tri Metil Propan ( TMP), Metilen Di Fenil Di-izosiyanat ( Pure MDI, PMDI, Modified MDI) ve gliserinin satışını yapmaktayız.
We sell Mono ethylene glycol, Di ethylene glycol, Adipic acid, Phthalic anhydride, Poly-ether polyol, Flame retardants (TCPP), Tri Methyl Propane (TMP), Diphenyl Methylene Diisocyanate (Pure MDI, PMDI, Modified MDI), which we always have ready in stock and use in our production of polyurethane systems.
Flame RetardantsChemical Name : TCPP – Tris(2-chloropropyl) phosphateChemical Formulation :C9H18O4CI3PMoleculer Weight : 327,4 g/molNeme dayanıklı, düşük sıcaklık direncine sahip ve yanmazlık özellikleriyle PVC, poliüre-tan köpük ve fenolik ürünlerde kullanılan yanmazlık ajanıdır.With their properties of being moisture-resistant, low temperature resistant and non-flammable, they are incombustibility agents used in PVC, polyurethane foam and phe-nolic products.
Polyether PolyolsPolieter polyollar, polimerik MDI ile beraber, çoğunlukla ısı yalıtımında kullanılan poliüretan rijit köpüklerin temel hammaddesini oluştururlar. Rijit polyolların uygulama alanları arasında; poliüretan panel, buzdolabı, sprey köpük ve ahşap taklidi gibi sistemler yer almaktadır.Ayrıca Polieter polyollar, slapstock veya kalıplama (cold-cure) yöntemiyle üretilebilen poliüre-tan esnek süngerlerin üretiminde, mobilya ve yatak sektörlerinde kullanılan konvansiyonel süngerler, maksimum elastikiyet sağlayan HR süngerler, viskoelastik (hafızalı) süngerler, oto-motiv süngerleri, ambalaj süngerleri, medical süngerler, izolasyon süngerleri gibi sünger üreti-minde, inşaat ve otomotiv sektöründe olmak üzere; yapıştırıcı, astar, membran, sızdırmazlık malzemeleri, mürekkep, mastik ve elastomerleri üretiminde de kullanılır.
Polyether polyols, along with polymeric MDI, form the basic raw material of polyurethane rigid foams that is mostly used in insulation. Among the application areas of rigid polyols are sys-tems such as polyurethane panels, refrigerators, spray foams, and wood imitations. Also, polyether polyols are used in the production of polyurethane flexible foams that can be produced with slapstock or molding (cold-cure) methods, in the production of foams such as conventional foams used in the furniture and bedding industries, HR foams that provide maxi-mum elasticity, viscoelastic (memory) foams, automotive foams, packaging foams, medical foams and insulation foams, and in the production of adhesives, primers, membranes, sealants, inks, mastics and elastomers in the construction and automotive industry.
21
POLYURETHANE SYSTEMS
baymelwww.baymel.com
Adres / Address: 3. Organize Sanayi Bölgesi Mehmet Batallı Bulvarı No:83 Şehitkamil / GAZİANTEPTelefon / Phone: +90 342 337 86 90 (pbx)Fax: +90 342 337 86 92E-mail: [email protected]
BAYMEL POLİÜRETAN KİMYA SAN. TİC. LTD. ŞTİ.