Embed Size (px)
DESCRIPTION
*When special ordered with flame retardant (FR), tubing meets the requirements of SAE-AMS- DTL-23053/15, Class 1. Maximum Recovered I.D. Maximum Recovered I.D. Minimum Expanded I.D. Minimum Expanded I.D. HSLD combines the convenience of a single step installation of heat shrinkable tubing and high performance shielding. Grounding can be accomplished through a connector, back- shell, or grounding wire. Recovered Wall Thickness Recovered Wall Thickness 10.16 19.05 27.94 38.10 50.80 76.20 101.60
Citation preview
HEAT SHRINKABLE POLYOLEFIN
HSLD makes use of HLT heat shrinkabletubing with a soft, intercloth liner of .004”nickel/copper plated, polyester cloth.
HSLD combines the convenience of a singlestep installation of heat shrinkable tubing andhigh performance shielding. Grounding canbe accomplished through a connector, back-shell, or grounding wire.
0.0200.0250.0250.0250.0300.035
0.500.630.630.630.760.89
HSLD-3/16HSLD-1/4HSLD-3/8HSLD-1/2HSLD-3/4HSLD-1”
MinimumExpanded I.D.
RecoveredWall Thickness
CatalogNumber
MaximumRecovered I.D.
0.0930.1250.1880.2500.3750.500
2.363.184.766.359.53
12.70
0.1880.2500.3750.5000.7501.000
4.766.359.53
12.7019.0525.40
inches mm inches mm inches mm
Std. 4-ftLengthsft / pkgSize
20, 10020, 10020, 10020, 10020, 10020, 100
Applicable Specifications:
Typical Shielding Attenuation:Operating Temperature Range:
Shrink Ratio:Shrink Temperature:
Recommended Heat Gun:Standard Colors:
Standard Shipping Length:
SAE-AMS-DTL-23053/5, Class 1 & 3(Jacket only)85 dB (100 MHz - 10 GHz)-67°F (-55°C) to 275°F (135°C)2 to 1176°F (80°C)500°F (260°C)Black4 Foot Lengths
NICKEL-COPPER PLATED POLYESTER CLOTH SHEILDING
HW3X is a self-sealing heat-shrinkable tubingthat offers greater protection under adverse envi-ronmental conditions. Standard product is sup-plied with sealant which provides waterproofingand protection in underwater or undergroundconditions. The polymer tubing has excellentinsulating, abrasion-resisting, and strain-reliefproperties. Seals may be made over lead, steel,aluminum, copper and all standard plastic andelastomeric insulating materials. Also availablewithout sealant (uncoated).
*When special ordered with flame retardant (FR),tubing meets the requirements of SAE-AMS-DTL-23053/15, Class 1.
Applicable Specifications:Operating Temperature Range:
Shrink Ratio:Shrink Temperature:
Recommended Heat Gun:Standard Colors:
Standard Shipping Length:
SAE-AMS-DTL-23053/15, Class 1*-67°F (-55°C) to 194°F (90°C)3 to 1250°F (121°C)500°F (260°C)BlackCut Lengths, See Table Below
HW3X-04-HW3X-07-HW3X-11-HW3X-15-HW3X-20-HW3X-30-HW3X-40-
0.0600.0950.1200.1400.1550.1550.155
1.522.413.053.563.943.943.94
MinimumExpanded I.D.
RecoveredWall Thickness
CatalogNumber
MaximumRecovered I.D.
0.1500.2200.3750.5000.7501.2501.750
3.815.599.53
12.7019.0531.7544.45
0.4000.7501.1001.5002.0003.0004.000
10.1619.0527.9438.1050.8076.20
101.60
inches mm inches mm inches mmSize
Part Number Definition:
HW3X - XX - XX - X - XX
Length in InchesS = with Sealant U = UncoatedExpanded SizeFR = Flame RetardantPrimary Part Number
6, 9, 12, 24, 306, 9, 12, 24, 30, 36, 486, 9, 12, 24, 30, 36, 486, 9, 12, 24, 30, 36, 486, 9, 12, 24, 30, 36, 486, 9, 12, 24, 30, 36, 4812, 24, 36, 48
StandardCut Lengths
inches
HEAT SHRINKABLE POLYOLEFINSEMI-RIGID · HEAVY-WALL · 3:1 · ADHESIVE-LINED
24
HSLD
HW3XHW3X-FR
