2017 el Sewing Machinesal Catalogue - cucitomania.it · intro 3 juki genuine spare parts 6 flat-bed sewing machine ddl-8700l 8 ddl8100eh/x73141 8 ddl-5600n-7 9 ddl-5600n 9 du-1281-7

2017 • General Catalogue

Non-apparel Sewing Machines

2017 Version 1

INTRO2

Stitch shape

Function

Needle

Hook

Feed

2-needle

Top and bottom feed

Zigzag stitching

Organized split needle bar

Unison-feed

Lockstitch buttonholing

X-Y drive

R-Θ drive

Alternating foot stroke adjusting dial

Horizontal-axis hook (large)

Horizontal-axis hook (3 fold-capacity)

Vertical-axis hook (large)

Vertical-axis hook (large)

Bottom-feed

Active tension

Needle-feed

Automatic thread trimmer

Differential-feed

Dry-head, Intelligent Direct-drive Sewing Machine

Cloth cutting knife

Pictograph for Function

0

6

81

7

9

efg

abcd

4

h

5

i

l

{

j

3INTRO

JUKI Genuine Spare Parts 6

FLAT-BED SEWING MACHINEDDL-8700L 8DDL8100eH/X73141 8DDL-5600N-7 9DDL-5600N 9DU-1281-7 9DU-1181N 10DNU-1541-7 10DNU-1541 10DNU-1541/X55245 11LU-1509N 11LU-1511N-7 12LU-1561N 12LU-1561N-7 12LU-1565N 12LU-2810-7 13LU-2810 13LU-2810A-7/X73178 13LU-2810-6 13LU-2818AL-7 13LU-2828A-6 14LU-2828A-7 14LU-2860 2.0 15LU-2860-6 15LU-2860-7 15LU-2868AL-7 15LU-2810A-7/JEUX0061 15LU-2210N-7 16LU-2210W-7 16LU-2212N-7 16LU-2220N-7 16LU-2260N-7 17LU-2260W-7 17LZH-1290-7 17LZH-1290 17LU-2810A-7/SADE 18

CYLINDER-BED SEWING MACHINESDSC-245-7/X55167 20DSC-245U/X55200 20DSC-245U/X55278 20LS-1342-7/X55275 21LS-1342/X55274 21LS-1342/X55280 21LS-2342-7 22LS-2342 22

POST-BED SEWING MACHINEPLC-2710-7 24PLC-2710 24PLC-2760-7 24PLC-2760 24PLC-2760L 24PLC-2765 24PLH-981U 25PLH-982U 25PLN-985U 25PLC 2760RDV8-HMC 25

LONG ARM SEWING MACHINESLU-2216N-7 27LU-2266N-7 27LU-2800 Series /JEUX0031 27LG-158-1U 28LG-158U 28TSC-461U 28TNU-243U 29TU-273U 29TSH-411U 29TSN-421U 29TSC-441U 29TSU-471U 29

BARTACKING / SHAPE-TACKING MACHINESLK-1900B-HS 31LK-1900B-WS 31LK-1942HA 31LK-1942GA 31LK-1941ZA 31PGM-7 31LK-1910 32LK-1920 32LK-1930 32

BONDING MACHINE 33LHP-PP1 34LWU-3015 34QHP-A05 35QHP-A08 35

COMPUTER-CONTROLLED CYCLE MACHINEAMS-210EN-1306 37AMS-210EN-1510 37AMS-210EN-2210 37AMS-221EN-2516 37AMS-221EN-3020 37AMS-224EN-4530 39AMS-224EN-6030 39AMS-210EN-HL1306/7300 39AMS-221EN-TS3020 40AMS-224EN6030/X7910 40AMS-221EN2516/X7910 40AMS221EN/JEUX0043 41AMS221EN/X7910/JEUX0043 41AMS224EN/JEUX0043 41AMS224EN/X7910/JEUX0043 41MO-6900G 42LBH-1790A 42SC-922/M51N 43PM-1 44PM-3 44

Contents

Catalogue of each model is also available. For further details, please refer to the individual machine catalogue.

INTRO4

Juki Central EuropeJuki Central Europe (JCE), a subsidiary of Juki Corporation,

was established in 2005 as the official body coordinating

sales and logistics across twenty European countries as

well as Russia, North Africa and Turkey. From the compa-

ny offices in Warsaw, Poland; sales, marketing, logistics

and technical support services are coordinated for the

entire extended European market-place. The company’s

strengths are leveraged through an extensive distributor

network that has been established over the years, offering

the shared knowledge and expertise of industry leading

experts in the sewing sector. Juki Central Europe’s differ-

ent office in Moscow, Minsk and Turkey, as well as Juki

Italia S.p.A, again add to our extensive network supporting

and maintaining the Juki brand across the continent and

beyond. Juki offers an extensive line of industrial sewing

machines for the apparel industry – ranging from Lock-

stitch, Overlock and Coverstitch machines, to electronic

bartackers and automated sewing systems. Our machines

have also become renowned in the non-apparel sector,

supplying such industries as automotive, upholstery,

marine, industrial fabrics, footwear, leather products and

home textiles. As well as our extensive range of high

quality industrial sewing machines Juki produce machines

for the semi-professional and home-use market with our

home sewers and surgers establishing themselves as

some of the most popular and reliable in the market.

We are very proud of our historically strong distribution

network across Europe and throughout the rest of the

world. From Juki Central Europe’s offices in Warsaw and

through our representative offices we are able to serve

the entire extended European market and North Africa.

Through our carefully selected distributors we are able to

combine knowledge and specific geographical market ex-

perience to ensure the best sewing solutions are available

to customers. Leveraging both our own expertise as well

as that of our distributors we are able to provide insights

and assistance that can improve end users productivity and

quality.

Here in Juki Central Europe we constantly have one eye

on the future and are looking to improve not only our own

business but that of our customers and anyone who uses

a Juki sewing machine. Our products are developed and

manufactured with a consumer viewpoint in-mind at all

times and it is our goal to build strong, lasting customer

relationships. We will continue to provide products and

services by taking our customers’ needs and desires into

account, by treating our customers as partners, through

which we will create value together.

5INTRO

About JukiJuki is a world leading brand in the manufacture of sew-

ing machines for the industrial and home sewing machine

markets. Juki Corporation, the parent company of Juki Central

Europe Sp z.o.o, has been a pioneer in sewing machine

technology for over 65 years. The firm supplies more than

170 nations with sewing equipment and related products and

with established logistic networks it has the ability to supply

the world with the best quality products. The Juki Corporation

headquarters is located Tokyo, Japan, with subsidiaries world-

wide assisting in its sales, logistics and technical functions.

The firm’s insight into the world of sewing machine manufac-

turing began with home machines in 1947 from which they

progressed to basic industrial machines becoming the world

leader they are today. Through the years keeping in tandem

with advancing technologies Juki has developed state of the

art electronic units and automated sewing systems in use

the world over. The Juki Sewing Research Institute assists

apparel manufactures in improving productivity, developing

highly efficient production systems, and improving the work

environment. This service is provided to help manufactures

using Juki machines to glean the best productivity and work

environment possible. Juki’s slogan: “Mind and Technology”

reflects the global philosophy of providing customers with

the highest quality products and services according to their

specific needs. Juki has committed itself to creating products

from the customers view point in the conviction that we can

learn from each other to created new value.

Why JukiThe Juki brand is synonymous with quality and every ma-

chine produced under the brand will be able to perform time

and time again. Juki correctly evokes the perception of quality

made Japanese machinery and we strive to create new

values through “Monodzukuri” (the art of product-making).

Everything from the machine heads to the individual parts are

made to our best ability and to the highest quality.

Consideration for the environment is an essential factor in the

design and development of Juki industrial sewing machines.

As such, sewing machines are designed to reduce noise, save

energy and help prevent environmental pollution. To ensure we

can carry these activities out to the best of our ability Juki has

defined an Environmental Philosophy as well as an Action Plan.

The Juki Sewing institute is a division of Juki Corporation that

provides custom support for factories and end users. They

provide services such as seminars, consulting, and informa-

tion service with consideration given to customer`s productiv-

ity, technology as well as safety.

JUKI GENUINE SPARE PARTS6

Juki Genuine spare parts are made to the highest possible standard and are created with only the best raw materials. The shape, dimension, finishing and materials of all Juki genuine parts are rigorously tested to ensure end users have a product that will be reliable and durable even under heavy use. Each genuine spare part is created based in the specification and accumulated experience of Juki technical staff who work to create the machine the part will be used for in the first place. The proper material for each part is specially selected and tested before being standardised; this means a genuine part maintains the exact quality and accuracy no matter the piece. Juki genuine parts are also inspected and compared against the pre define specification outlined to ensure the best possible performance. The effects of using counterfeit parts in a Juki machine include: poor sewing, decreased productivity, increased costs, reliabilityof factory output questioned and lose of Juki guaranty and warranty. Non-genuine parts are not put through the same conditioning and testing resulting in a subpar material that will result in poor sewing. A difference in the parts shape and finishing can drastically effect the machines operation and result in skip stitches among many other issues. One of the biggest consequences of using none genuine spare parts is a decrease in productivity. These counterfeit parts will case more machine problems depending on the specific part in question e.g. skip stitches, slower feeding of the material and inconsistent stitches. As a result, any investment saved on the individual part will be counter-acted by the loss of money from the fall in productivity as well as wasted time and material. Also more machine down time due to problems caused by none genuine parts will result in an increased cost for any factory.More costly than the wasted time and material mentioned above is the effect poor production can have on a factories reputation.

JUKI Genuine Spare Parts

FLAT-BED SEWING MACHINE

FLAT-BED SEWING MACHINE8

DDL-8700L1-needle, Lockstitch Machine with long stitch length, for leather sewing

This machine is able to sew at a pitch as long as 7mm for both normal and reverse feed directions.With the adoption of a feed mechanism and thread takeup lever, the machine achieves increased efficiency of feed and well-tensed stitches. It is a basic lockstitch machine suited for sewing leather or heavy materials such as bags, pouches and purses.

Model name DDL-8700L

Max. sewing speed 4,000sti/min

Max. stitch length 7mm

Presser foot By knee: 13mm

Needle DB×1 #16~#23

Thread #40~#8, B33~B92, Nm=90/3~30/3

4

DDL-8700L

DDL8100eH/X731411-needle, Lockstitch Machine with double capacity hook

The machine has been designed for reduced vibration and noise and upgraded reliability and durability By modifying the sewing mechanisms in order to achieve low-tension sewing, the machine flexibly responds to various kinds of materials and produces beautiful seams of consistent quality.

Model name DDL8100eH/X73141

Aplication Heavy-weight



Needle bar stroke 35.0mm

Lift of the presser foot By hand: 5.5mm, By knee: 13mm

Needle DB×1 (#21) #20~#23

Feed dog 3-row

i6a

DDL8100eH/X73141

9FLAT-BED SEWING MACHINE

DDL-5600N-7 iDDL-5600N1-needle, Lockstitch Machine with Double-capacity Hook with long stitch, for heavy-duty

The machine is capable of making well-tensed, beautifully finished seams, regardless of the type of heavy materials.

Model name DDL-5600NL-7, 5600NL




Needle DB×1 (#21) #20~#23

Thread #30~#8, B46~B92, Nm=60/3~30/3

Thread Trimmer Yes / No

4a

DDL-5600N-7

DU-1281-71-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity HookThe thread trimmer achieves consistent thread trimming regardless of thickness of the thread, i.e., from thin to thick thread. The DU-1281-7 is suited to the sewing and decorative shape-tacking of heavy-weight materials such as car seats, sofas, bags, stroller and tents.

Model name DU-1281-7Max. sewing speed 2,000sti/minStitch length 2~8mm (forward/backward)Lift of the presser foot By hand: 6mm, By knee: 16mmAlternating vertical movement 2~5mm

Needle DP×17 (#22) #16~#23Thread #30~#8, B46~B92, Nm=60/3~30/3Thread Trimmer Yes

i6ga

DU-1281-7

1-NEEDLE, LOCKSTITCH MACHINE10

DU-1181N1-needle, Top and Bottom-feed, Lockstitch Machine with Double-capacity HookWith its strong top and bottom feed mechanism, the machine insures the smooth feeding of hard-to-feed materials or multi- layered sections of materials to achieve consistent seam quality that is free from irregular stitch pitches. The automatic lubricating mechanism dramatically improves maintainability of the machine.

Model name DU-1181N-7/X73096 DU-1181NMax. sewing speed 2,000sti/minMax. stitch length 9mmPresser foot By knee: 15mmAlternating vertical movement 2~5mm

Needle DP×17 (#21) #14~#23Thread #40~#8, B33~B92, Nm=90/3~30/3Thread Trimmer Yes / No No

*DU-1181N-7/X73096 is available on a custom order. Contact JUKI for how to place an order.

6a

DU-1181N

DNU-1541-7 igDNU-15411-needle, Unison-feed, Lockstitch Machine with Double-capacity Hook

With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness.The machine’s rectangular feeding motion promises the consistent feeding of materials of all thicknesses without stitch gathering.

Model name DNU-1541-7 1541

Max. sewing speed 3,000sti/min 2,500sti/min



Alternating vertical movement 1~6.5mm 2.5~6.5mm

Needle 135×17 (Nm160) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~15/3

Thread Trimmer Yes No

7a

DNU-1541-7

111-NEEDLE, LOCKSTITCH MACHINE

DNU-1541/X55245 (for thick thread)1-needle,Unison-feed,Lockstitch Machine with Double-capacity Hook

DNU-1541/X55245 is able to sew a broad range of materials from genuine leather materials to lining materials. Excellent seam tightness on genuine leather and far less puckering on lining.

aw

Model name DNU-1541/X55245

Max.sewing speed 2,000sti/min

Max.stitch length 9mm

Needle bar stroke 38mm

Needle 134×17(Nm160) Nm125~Nm160

Thread #30~#0, Nm=60/3~8/3

DNU-1541/X55245

LU-1509N1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needlebar stroke of 38mm and long 190R needle, the machine supports the sewing of extra heavy materials. The machine comes with an extra large steel handwheel with a diameter as large as cp175.

7c

Model name LU-1509NS LU-1509NH

Application Heavy-weight Extra heavy-weight


Max. stitch length 9mm 10mm


Alternating vertical movement 2.5~6.5mm

Needle 190(R) or 135×17 (Nm160) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~20/3

#20~#1, Nm=40/3~10/3

LU-1509N


LU-1511N-7 ig1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook

This one-needle machine with a thread trimmer utilizes a basic performance which matches best to the sewing of medium to heavy materials. The machine’s rectangular feeding motion promises the consistent feeding of materials of all thicknesses without stitch gathering.

7c

Model name LU-1511N-7



Presser foot Auto: 16mm

Alternating vertical movement 1~6.5mm

Needle 135×17 (Nm160) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~20/3

Thread Trimmer Yes

LU-1511N-7

LU-1561NLU-1561N-7 igLU-1565N (with organized split needle bar) 12-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hooks

The two-needle machine with a thread trimmer offers basic performance that is ideally suited to sewing heavy materials. The machine utilizes a new mechanism that does not change the ratio of the alternate vertical movement of the walking foot and presser foot, even when the material thickness changes. The mechanism helps prevent slippage between the upper and lower materials even when a heavy material is used.

Model name LU-1561N LU-1561N-7 LU-1565N



Presser foot By knee: 16mm Auto: 16mm By knee: 13mm

Alternating vertical movement 2.5~6.5mm 1~6.5mm 2.5~6.5mm

Needle 135×17 (Nm160) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~20/3

Thread Trimmer No Yes No

LU-1561N-7

j4w


Model name LU-2810-7 LU-2810 LU-2810A-7/X73178 LU-2810-6 LU-2818AL-7



Presser foot Auto: 20mm, By hand: 10mm By knee: 20mm Auto: 20mm, By hand: 10mm

Alternating vertical movement 1~9mm

Needle 135×17 (Nm160) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~20/3

Thread Trimmer Yes No Yes Yes Yes

Hook Type 2.0 2.0 2.7 2.0 2.7

Stitch Length Dial 2-pitch dial 2-pitch dial 1-pitch dial 2-pitch dial 2-pitch dial

Motor Direct Drive Conventional Direct Drive Conventional Direct drive

High and long arm has been adopted. The machine is suited to the sewing of car seats, sofas and bags. It is a sewing machine provided with dramatically improved workability and functions which are required for sewing large products and extra heavy-weight materials.

LU-2810A-7/X73178The machine is suited to sew car seats, sofas and bags, provided with dramatically improved workability and functions required for sewing large products and extra heavy-weight materials.

LU-2818AL-7LU-2818AL-7 is suited for sewing of upholstery and other materials requires long distance seam thanks to being equipped with longer stitch length and 2.7 fold capacity hook.

7gLU-2810-7LU-2810 (2.0 fold-capacity hook) c

LU-2810A-7/X73178LU-2810-6 Thread trimming, 2.0 fold-capacity hook, 2-pitch dial ci

LU-2818AL-7Semi-dry Direct-drive, 1-needle, unison-feed, Lockstitch Machine with Vertical-axis 2.7 fold-capacity Hook

LU-2810A-7/X73178

Direct drive, thread trimming, 2.0 fold-capacity hook, 2-pitch dial i{

Direct drive, thread trimming, 2.7 fold-capacity hook id{

Direct drive, thread trimming, 2.7 fold-capacity hook, 2-pitch dial id{


LU-2828A-6LU-2828A-7Semi-dry, Unison-feed, Lockstitch Machine with Automatic Thread Trimmer

The shorter-thread remaining type LU-2828A-6/7 is a high-performance sewing machine. It leaves a shorter thread on the material at the beginning of sewing by means of the needle thread clamp device, as well as at the end of sewing by means of the thread trimmer which is provided with a shorter-thread remaining function. This means that manual thread nipping both at the beginning and at the end of sewing is no longer required, thereby helping reduce operator fatigue. Thanks to the adoption of a 2.7 fold-capacity hook, the frequency of bobbin thread changing is reduced and workability is improved.

i{c7g

Model name LU-2828A-6 LU-2828A-7



Presser foot Auto: 20mm, By hand: 10mm


Needle 134×35 (Nm140) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~20/3

Hook Type 2.7

Thread Trimmer Yes (Short-Tail Trimmer)

Stitch Length Dial 2-pitch dial

Motor Conventional Direct Drive

LU-2828-7

SURFACE SIDE

BOTTOM SIDE

* LU-2828-7 makes condensed stitch resulting in a shorter remaining thread

Thread Trimming, 2.7 fold-capacity hook, 2-pitch dial, short remaining thread type

Direct-drive, thread Trimming, 2.7 fold-capacity hook, 2-pitch dial, short remaining thread type


7g

Model name LU-2860 LU-2860-6 LU-2860-7 LU-2868AL-7



Presser foot Auto: 20mm, By hand: 10mm


Needle 135×17 (Nm160) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~20/3

Thread Trimmer No Yes Yes Yes

Hook Type 2.0 2.0 2.0 2.7

Stitch Length Dial 1-pirch dial 2-pitch dial

Motor Conventional Direct Drive

LU-2860 2.0 fold-capacity hook 0c

LU-2860-6 Thread trimming, 2.0 fold-capacity hook, 2-pitch dial 0c

LU-2860-7LU-2868AL-7

LU-2860-6

High and long arm has been adopted. The machine is suited to the sewing of car seats, sofas and bags. It is a sewing machine provided with dramatically improved workability and functions which are required for sewing large products and extra heavy-weight materials.

LU-2810A-7/JEUX0061Semi-dry head, Direct Drive, Unison Feed, Lockstitch Machine with Automatic thread trimmer with Fabric Edge

Trimmer {7gijcThis model has a thread trimming mechanism equipped with its own drive motor that is easily adjustable for better control over the speed. It allows for stepped cutting from the first stitch onwards and stepped cutting over narrow angles.

Direct Drive, thread trimming, 2.0 fold-capacity hook, 2-pitch dial i0c{

Direct drive, thread trimming, 2.7 fold-capacity hook, 2-pitch dial, long-pitch type i0d{


LU-2210N-7 (1.6 fold-capacity hook)

LU-2210W-7 (double-capacity, 2.0 fold hook) cHigh-speed, 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook

Thanks to its remarkable feed efficiency and improved feed cam unit, the machine smoothly feeds materials at high speeds while preventing stitch gathering.The machine is also equipped with a new box-type feed locus that enables the production of beautifully finished seams free from material flopping.

i7g

Model name LU-2210N-7, 2210W-7





Needle 134×35R (Nm140) Nm110~Nm160

Thread #30~#4, B46~B138, Nm=60/3~20/3

Thread Trimmer Yes / Yes

LU-2210N-7

LU-2212N-7LU-2220N-7 (shorter thread remaining type)High-speed, 1-needle, Unison-feed, Lockstitch, Machine with Vertical-axis Large Hook (2-pitch dial type)

Two different stitch lengths can be set depending on the application. The machine is suited to the sewing of leather and heavy materials such as car seats and sofas.

(LU-2220N-7)This is a high-performance machine which contributes to both increased productivity and improved quality for sewing car seats. Scissors need to be use far less, thereby helping prevent the material from being damaged.

i7g

Model name LU-2212N-7, LU-2220N-7





Needle 134×35R (Nm140) Nm110~Nm160

Thread #30~#4, B46~B138, Nm=60/3~20/3


LU-2220N-7


LZH-1290-7 iLZH-12901-needle, Lockstitch, Zigzag Stitching Machine with Large Hook

The machine tenses thread uniformly over the zigzag stroke to produce beautifully finished stitches at a high speed. With its extended zigzag with, higher presser foot lift, and newly introduced horizontal-axis double-capacity hook, the machine upgrades the functions required for the sewing of heavy materials.

LU-2260N-7 (1.6 fold-capacity hook)

LU-2260W-7 (double-capacity, 2.0 fold hook) cHigh-speed, 2-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hooks

The vertical strokes of the presser foot and walking foot (their alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head. In addition, the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times.

7c

i7g0

Model name LU-2260N-7, 2260W-7





Needle 134×35R (Nm140) Nm110~Nm160

Thread #20~#5, B69~B138, Nm=40/3~20/3


Model name LZH-1290-7 LZH-1290



Presser foot By knee: 11mm By knee: 14mm

Zigzag width Max. 8mm (adjustable to 10mm)

Needle SY1906 (Nm100) Nm90~Nm110

Thread Trimmer Yes No

LU-2260N-7

LZH-1290-7


LU-2810A-7/SADESewing Station for Car Seat Tearing Seams for Airbags

Juki’s new sewing station for the sewing of high quality and reliable safety seams through monitoring and documentation of given sewing parameters and sewing processes. The use of these sensors throughout the sewing process allows for incorrect components to be highlighted to the operator. Programmable labelling machine means consistent accurate information is maintained throughout the sewing process.. When sewing is completed a final label is printed and incorporated into the material to ensure the viability and traceability of the seam.

LU-2810A-7/SADE

SOFTWARE APPLICATION1. Login is possible via manual code, bar code

scan or RFID card (optional)

2. Easy to configure database of all important data

3. Integrated label editor

4. Easy to select sewing jobs with defined materials. All important materials can be seen permanent and the presence is controlled continuously by scanners and sensors.

5. Real time seam position. on display the system shows you in real time the sewing position in the seams. //Stitch by stitch real time display of thread tension values

6. Creation of sewing seam parameters and limits are fast and easily done

i{7g

CYLINDER-BED SEWING MACHINES

DSC-245-7/X55167 (standard hook) igDSC-245U/X55200 (standard hook)

DSC-245U/X55278 (standard hook with “horizontal feed motion”)Cylinder-bed, 1-needle, Unison-feed, Lockstitch MachineThe machine provides good tightness of seams even with lower thread tension, and reduces the variances of stitch length at high and low speed. Thanks to a slide take-up lever, the responsiveness to thick threads has been further improved, and the ratio of alternating vertical movement remains unchaged even with the changes of material thickness.

7

Model name DSC-245-7-0B/X55167 DSC-245/X55200 DSC-245/X55278

Max. sewing speed 2,200sti/minMax. stitch length 6mm (nomal/reverse feed)Lift of the presser foot By hand: 9mm, By knee: 16mm (max.)

Alternating vertical movement 2.5~6.5mm

Needle 135×17 (Nm130) Nm100~Nm180Thread #50~#20, B33~B92, Nm=120/3~30/3

CYLINDER-BED SEWING MACHINE20

DSC-245-7-0B/X55167

21CYLINDER-BED SEWING MACHINE

LS-1342-7/X55275 (thick-thread type) igLS-1342/X55274 (thick-thread type)

LS-1342/X55280 (small-cylinder type)Cylinder-bed, 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Hook

LS-1342/X55280 is a machine with large vertical-axis hook which makes the throad plate on the tip of cylinder smallest to the utmost limit. Gauges for small articles are equipped as standard, therefore the machine is good at handling small articles and ideal for sewing articles with narrow gusset such as wallets and small bags.LS-1342/X55274 and LS-1342-7/X55275 are machines which have more powerful feed and better responsiveness to thick thread the standard machines. The machine with automatic thread trimmer is provided as standard with an instantaneous change-over device for for the alternate vertical movement amount (DL device) and auto-lifter (AK device).

7

Model name LS-1342-7/X55275 LS-1342/X55274 LS-1342/X55280


Max. stitch length 6mm (nomal/reverse feed) 4mm (normal/reverse feed)

Hook Vertical-axis 1.6 fold-capacity hook

Needle thread tention control Double tention type

Needle 135×17 (Nm160) Nm100~Nm180 135×17 (Nm110) Nm100~Nm160

Thread #30~#5, B46~B138 #20~#00, Nm=40/3~5/3

#40~#20, B33~B69, Nm=90/3-40/30

limitation to thread trimming when sewing Nm8 thread

LS-1342/X55280

CYLINDER-BED SEWING MACHINE22

LS-2342-7 iLS-2342Semi-Dry Direct-drive, Cylinder-bed, 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Hook (Semi-long type)

High and semi-long arm has been adopted. The long distance from the machine arm to the needle contributes to improved workability. The machine is suited to furniture and bags, provided with dramatically improved workability and functions required for sewing large products and extra heavy-weight materials. The LS-2342 offers a consistent stitching pitch and outstanding ability in sewing sharp curves.Additional benefits attributed to the new LS-2342 include:

� Thread tightness can be kept consistent, even the multi-level of material.

� Double tension provided as : standard � Multi-functional 6-string switch � High-torque direct-drive motor is installed � Gauge for small articles are provided as standard.

{g7

Model name LS-2342

Gauge type For small articles


Max. stitch lenght 9mm (Normal/Reverse feed)

Lift of the presser foot By auto: 20mm, By hand: 10mm

Hook Vertical-exis 1.6 fold-capacity hook

Needle (at the time of delivery) 134-35 (Nm160) Nm125~Nm180

Thread #40 - #5 (nm90/3 - 20/3)

LS-2342

Slimmed-Down Throat Plate Dual-Tension is Provided as Standard

High-Torque Direct-Drive Motor

POST-BED SEWING MACHINE

PLC-2710-7 i{PLC-2710PLC-2760-7 0i{PLC-2760 0PLC-2760L (thick-thread long-pitch type) 0PLC-2765 (with organized split needlebars) 1

7gc

Model name PLC-2710-7, 2760-7 PLC-2710, 2760 PLC-2760L PLC-2765Max. sewing speed 2,500sti/min 2,000sti/min 2,500sti/minMax. stitch length 12mmPresser foot Auto: 20mm, By hand: 10mm By knee: 20mm Auto: 20mm, By hand: 10mm Auto: 18mm, By hand: 10mmAlternating vertical movement 1~9mm

Needle 135×17 (Nm140) Nm100~Nm180 135×17 (Nm200), Nm140~Nm200

135×17 (Nm140) Nm100~Nm180

Thread #30~#5, B46~B138, Nm=60/3~18/3 #8~#0, B92~B207, Nm=30/3~15/3

#30~#5, B46~B138, Nm=60/3~18/3

Thread Trimmer Yes No No NoHook Type 2.0Stitch Length Dial 2-pitch dial 1-pitch dial 2-pitch dial 1-pitchDirect Drive DD Conventional Conventional Conventional

PLC-2760-7

This sewing machine is best-suited to the sewing of heavy weight materials in processes such as car-seats, sofas and sports goods. The long distance from the machine arm to the needle contributes to improved workability.

NEW BOBBIN THREAD SPOOL DEVICEBobbin thread spool device mean you no longer have to roll the thread manually.

DOUBLE TENSION PROVIDED AS: STANDARD:The machine comes with a dual-thread-tension system and is able to perform sewing with low-count thread under a higher tension with ease.

HIGHER LIFT OF THE PRESSER BARA presser bar height of 20 mm is achieved

when using the automatic presser bar lifting lever. Thanks to this feature, the process of joining leather and heavy-weight sponges,

which are usually used as materials for expensive sofas, can be carried out with ease.

VERTICAL-AXIS 2 FOLD-CAPACITY HOOKPROVIDED AS : STANDARD

The hook can be easily adjusted with a screw on the needle guard. This prevents stitch

skipping and wear of hook edge.

HIGH-TORQUE DIRECT-DRIVE MOTORIS INSTALLED.

The sewing machine provided with a thread trimmer has adopted a high-torque direct-

drive motor which is suitable for heavy-weight materials. As a result, the sewing

machine is excellent at its responsiveness and ensures increased penetration into the material even when sewing multi-layered

parts.

STITCH LENGTH CAN BE CHANGED OVER AMONG DIFFERENT LENGTHS

The sewing machine with a thread trimmer is provided with a 2-pitch dial. It is able

to sew different sewing lengths on the go since the length can be instantaneously

changed over.

POST-BED SEWING MACHINE24

25POST-BED SEWING MACHINE

0c7g

PLH-981U (1-needle) 4PLH-982U (2-needle) 40Post-bed, Needle-feed, Lockstitch Machine

PLN-985U (1-needle) 5Post-bed, Bottom-feed, Lockstitch Machine

With a needle feed mechanism that operates in synchronization with the bottom feed, the machine produces beautiful seams free from slippage even when sewing slippery or hard-to-feed materials.

Model name PLH-981U, 982U PLN-985U



Presser foot By knee: 10mm By knee: 9mm

Needle DP×5 (#18) #16~#21 DP×5 (#16) #16~#21

Thread #40~#8, B33~B92, Nm=90/3~30/3

PLN-985U

PLC 2760RDV8-HMC2-needle, Semi-dry, Post-bed, Unison-feed, Lockstitch Machine with Vertical-axis 2.0 Fold-Capacity Hook, Decorative Stitch

The stitch length can be adjusted electronically as well as new stitch patterns imputed, making for much simpler interface for the operator.

PLC 2760RD V8-HMC

LONG ARM SEWING MACHINES

27LONG ARM SEWING MACHINES

LU-2216N-7 (1-needle)

LU-2266N-7 (2-needle) 0Long-arm, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook

Based on the market-proven design of the LU-2210N-7 and -2260N-7 Series, the LU-2216N-7 / -2266N-7 are developed with a longer distance from the machine arm to needle... a full 650mm. The long arm unison-feed lockstitch machine with vertical-axis large hook with automatic thread trimmer is best- suited to processes that require a longer distance from the machine arm to needle, such as reinforcement stitching and topstitching in tape attachment processes for sewing furniture or car seats.

i7gc

Model name LU-2216N-7 LU-2266N-7





Distance from needle to machine arm 650mm

Needle 134×35R (Nm140) Nm110~Nm160

Thread #30~#4, B46~B138, Nm=40/3~20/3

#20~#5, B69~B138, Nm=40/3~20/3

Thread Trimmer Yes Yes

LU-2266-7

LU-2800 JEUX0031

LU-2800 Series /JEUX0031 (Long Arm)Semi-dry direct drive, unison feed, lockstitch machine with vertical-axis hook and 75cm or more arm length.The LU-2800 Series long arm has been extended to add to the wide bed area, contributing to vastly improved workability. The machine arm has been doubled in length from 35cm to 1m or 75cm or more making it perfect for sewing large objects usually to awkward to fit under a sewing machine head. The machine has a high torque direct-drive motor which supports the sewing of heavyweight materials. As a result, the sewing machine promises not only improved responsiveness and quick startup, but also higher stop accuracy. The long arm model is also available with 1-needle or 2-needle versions as well as a 75cm or 1m arm length. This model is manufactured in the EU.

i{gd7

Model name LU-2810

Max Sewing Speed 3,000sti/min

Max Stitch Length 9/12mm

Presser Foot Auto: 20mm, By Hand: 10mm

Alternating Vertical Foot 1~9mm

Needle 135x17 (Nm160) Nm125~Nm180

Thread #30~#5, B46~B138, Nm=60/3~20/3

LONG ARM SEWING MACHINES28

LG-158-1U (1-needle)

LG-158U (2-needle) 0Long-arm, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook

With a generous 750mm of free space under the arm and powerful unison-feed that provides a maximum stitch length of 10mm, the machine delivers outstanding productivity when sewing heavy materials such as tents and sheets.

d

Model name LG-158-1U, 158U



Presser foot By pedal: 21.5mm



Needle DD×1 (#25)

Thread #20~#5, B69~B138, Nm=40/3~20/3

LG-158U

TSC-461U

TSC-461USuper-long Cylinder-bed, 1-needle, Lockstitch Machine with Large Shuttle-hook for Extra Heavy-weight Materials

It is equipped with a free space under the arm as wide as950mm, which means that the machine is capable of sewing large materials, long-sized materials and tubular sewn products with ease.

7

Model name TSC-461U

Max. sewing speed 650sti/min


Presser foot By pedal: 20mm



Needle 794 (Nm230) Nm130~Nm280

Thread #8~#0, B92~B207, Nm=30/3~15/3

29LONG ARM SEWING MACHINES

TNU-243U (unison-feed) 7TU-273U (top and bottom-feed) 6Semi-long Flat-bed, 1-needle, Lockstitch Machine with Large Shuttle-hook for Extra Heavy-weight Materials

The machine is optimally suited for the sewing of extra heavy-weigth materials such as tents, seat belts, and bag handles.

Model name TNU-243U, TU-273U






Needle 794 (Nm230) Nm130~Nm280 DY×3 #21~#28

Thread #8~#0, B92~B207, Nm=30/3~15/3

TNU-243U

TSC-441U

TSH-411U (bottom-feed) 4TSN-421U (needle-feed) 5TSC-441U (unison-feed) 7TSU-471U (top and bottom-feed) 6Semi-long Cylinder-bed, 1-needle, Lockstitch Machine with Large Shuttle-hook for Extra Heavy-weight Materials

The lifting range of the presser foot is 20mm for smooth placement and easier removal of extra heavy-weight materials. The machine has more free space under the machine arm to allow the operator to easily place and remove a large sewing products.

Model name TSH-411U, TSN-421U TSC-441U, TSU-471U



Presser foot By pedal: 20mm

Alternating vertical movement 4~8mm (TSC-441, TSU-471)


Needle 794 (Nm230) Nm130~Nm280

Thread #8~#0, B92~B207, Nm=30/3~15/3

BARTACKING / SHAPE-TACKING MACHINES

31BARTACKING / SHAPE-TACKING MACHINES

LK-1900B-HS (for heavy-weight)

LK-1900B-WS (for extra heavy-weight) aComputer-controlled, High-speed Bartacking Machine

The machine achieves a maximum sewing speed of 3,200sti/min (Normal hook type), enhancing the startup speed at the beginning and ending of sewing, as well as the speed of thread trimming, thus reducing the total cycle time.It therefore achieves upgraded productivity.

{ihf

Model name LK-1900B-HS LK-1900B-WS

Sewing area 30mm (L)×40mm (W)


Stitch length 0.1mm~10mm (0.1step)

Work clamp foot 13mm (17mm when the reverse-rotation needle-up function)

Needle DP×17 (#21)

Number of standard patterns 50 patterns

Number of data that can be input 200 patterns

LK-1900B-HS

LK-1942HA

PGM-7

LK-1942HA (for heavy-weight with intermediate presser)

LK-1942GA (for extra heavy-weight with intermediate presser)

LK-1941ZA (for seat belts with heat cutter)Computer-controlled, High-speed Shape-tacking Machine

The following features promise improved sewing capabilities for extra heavy-weight materials: A high-power, direct-drive motor that drives the needle with increased material-penetrating force; a higher-torque stepping motor that increases the feed efficiency, and a pneumatic work clamp that increases the material clamping force.

{ifb

Model name LK-1942HA LK-1942GA LK-1941ZA



Stitch length 0.1~10.0mm

Number of data that can be input Max. 64 patterns

Needle DP×17 (#18) #18~#20

DP×17 (#23) #21~#23

DP×17 (#25) #24~#26

PGM-7Handy Programming Device

ITEM# M8510580BA0Sewing patterns can be entered or modified through the handy programming device while holding it. Dedicated keys for frequently- used functions are provided on the handy programming device to cut down the operation time.

BARTACKING / SHAPE-TACKING MACHINES32

LK-1930

LK-1910LK-1920 (with intermediate presser)

LK-1930 (with intermediate presser and input function)Computer-controlled, High-speed Shape-tacking Machine

The machine is fully equipped with state-of-the-art features such as a higher presser foot lift, a double-capacity shuttle hook, and a direct-control machine head that ensures quick response and an accurate stop position.

{ifa

Model name LK-1910S, 20S, 30S LK-1910H, 20H, 30H

Application Standard Heavy-weight



Stitch length LK-1910,20 : 0.1~10mm LK-1930 : 0.1~12.7mm

Number of data that can be input

LK-1910,20 : 64 patterns LK-1930 : 691 patterns

Needle DP×5 (#14), DP×17 (#18)

BONDING MACHINE

BONDING MACHINE34

LWU-3015Ultrasonic Welding Sewing Machine (VARIABLE ARM SYSTEM)

The LWU-3015 is the first Ultra Sonic Welding Machine available from Juki. The machine uses ultrasonic welding of fabrics to bond them together instead of stitches. This machine creates seamless finishing’s that are comfortable to wear and allow for a lot of stretchiness. Seam tape can also be used to enhance the bond (on one side) and create a water proof seal. Ultra Sonic Bonding is perfectly suited for non-woven fabric and the finishing type can create a unique point of difference for products created with this type of machine.

Model No LWU-3015

Power Required 1P 200V 50/60Hz

Power Consumption 1.0kva

Power Out-Put Max 600W

Oscillating Frequency 30KHz

Feed Speed 0-8.0m/min (minimum 0.1m/min)

Motor 2 Stepping Motors

Presser Air Cylinder

Others

PLC Control / LCD Touch Panel / Control Horn Cooling Device / Air Pressure Detector / Welding Roller Cooling & Blowing Device Touch sensor

*air compressor is required

LHP-PP1Continuous Feed Heat-Sealing Machine

This bonding machine uses heat to weld fabric together using specialized seam tape. The bond created is strong and water tight after cooling. This bond can also be used on top of normal stitch seems to make them water proof. Perfectly suited for the joining of sportswear, swimwear or safety gear. Tape finishing can also be used for design purposes to give a garment a point of difference

Model No LHP-PP1

Power Required 1P/ 200 220V 50/60Hz

Power Consumption 0.5SKVA

Heat Method Hot Plate

Arm Type Post Type

Feed Speed Max. 5 cm/min

Heating Temperature Upper Heater: Max 2800C / Lower Heater: Max 1900C

Welding Width 13cm

LWU-3015

LHP-PP1

QHP-A05QHP-A08Hot Air Sealing Machine

This hot air sealing machine uses hot air to melt specialised welding tape ; the melted welding tape is then fused to the fabric as it passes through an upper and lower roller. The nozzle has been designed in such a way as to allow for extremely accurate positioning.

Model QHP-A08

Power required 1P/200 220 240 V 50/60Hz

Power consumption Abt. 2.3 KVA

Upper roller Steel (Width: 28mm or 30mm / Shape: Groove, Flat or Concave) or Silicon rubber (30mm)

Lower roller Silicon rubber (Width: 30mm / Shape: Flat)

Nozzle heater 2.0 KW (200V)

Nozzle width 22mm, 24mm, 26mm

Nozzle air temp. Up to 750 Centigrade

Prevention system Power failure/Heater element/Air pressure

Air consumption 100 litter/min.

Arm type Post/Cylinder – one action change over

Infrared thermosensor for accurate temp. control.

Using shuttle valve control compress

35BONDING MACHINE

COMPUTER-CONTROLLED CYCLE MACHINE

AMS-210EN-1306 (X: 130mm × Y: 60mm)

AMS-210EN-1510 (X: 150mm × Y: 100mm)

AMS-210EN-2210 (X: 220mm × Y: 100mm)

AMS-221EN-2516 (X: 250mm × Y: 160mm)

AMS-221EN-3020 (X: 300mm × Y: 200mm)Computer-controlled Cycle Machine with Input Function

The sewing machine achieves the highest sewing speed, 2,800sti/min, in the industrial sewing machine industry. As a result, cycle time is dramatically reduced. The feed accuracy is substantially improved due to the adoption of the encoder control system. The new AMS Series models substantially decrease power consumption when compared with the conventional ones. They have been designed to achieve eco-friendliness.

AMS-210EN-1306 (X: 130mm × Y: 60mm)The sewing machine flexibly supports the sewing of small articles such as labels and emblems. The sewing machine’s small sewing area promises ease of use when handling small articles, thereby enabling smooth sewing operation.

AMS-210EN-1510 (X: 150mm × Y: 100mm)The 1510 model is well received in the market due to its moderate-sized sewing area.Responding to market demand, the 1510 area model with a motor-driven feeding frame has been newly developed.This model can be used in a plant which is not provided with pneumatic equipment.

{ihea

AMS-210EN-2210 (X: 220mm × Y: 100mm)This model has a sewing area that is best-suited to the sewing of large parts, including the shape-tacking of jean pockets. With this model, you may recognize the higher productivity of the cycle machine.AMS-221EN-2516 (X: 250mm × Y: 160mm)The sewing machine is best-suited to the sewing of large labels and emblems, the sewing of two or more pieces of small labels and emblems at one time, and the shape-tacking of bags and shoes. The sewing machine is applicable to a broad range of materials and processes, while leading the industrial sewing machine industry in terms of improvement in quality and the promotion of production that does not require sewing-machine operators to have special skills.

AMS-221EN-3020 (X: 300mm × Y: 200mm)The sewing machine is applicable to sewing products which require a wider sewing area than that of the “AMS-221EN-2516.”It is best-suited to the attaching of handles to bags and the shape-tacking of boots and shoes. The sewing machine is flexibly applicable to sewing requiring a medium sewing area.

AMS-210EN-1510

AMS-210EN-1306

Product Continues on Next Page

37COMPUTER-CONTROLLED CYCLE MACHINE

COMPUTER-CONTROLLED CYCLE MACHINE38

Automated detection and exchange of empty to full bobbins and bobbin-cases during production process when used in combination with the detector. Minimal production down-time and drastic production increases. Available in different sizes; depending on the technical requirements.

This attachment is capable of monitoring broken threads and stopped bobbins (avoiding fake-seam). If it is used in combination with the automatic bobbin chang-er vastly improves productivity.

This device burns the end of the thread to keep it in place avoiding it slipping from the needle and also avoids the thread becoming undone at the end of sewing. Users can switch between different material thicknesses without adjustment. Results in a clean stitch at the beginning of the sewing process. This attachment is very exact, leaving basically no remaining thread on the material.

The sensor detects the remaining thread in the bobbin, highlighting when the bobbin is nearly emp-ty and informing the operator through the control panel. It also monitors the direction the bobbin is rotating and warns the opera-tor if incorrect (ensuring accurate thread tension).

Optional Accessories for AMS-221 Series

Model name AMS-210EN-SS AMS-210EN-HS AMS-221EN-SL AMS-221EN-HL

Application Light- to medium-weight Medium- to heavy-weight Light- to medium-weight Medium- to heavy-weight

Max. sewing speed 2,800sti/min*

Stitch length 0.1~12.7mm (0.05mm step)

Storage of pattern data in the memory

Main-body memory: Max. 500,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

External media: Max. 50,000,000 stitches, 999 patterns (max. 50,000 stitches / pattern)

Needle DP×5 (#14) DP×17 (#18) DP×5 (#14) DP×17 (#18)

*Stitch length is 4mm or less for the AMS-210EN and 3.5mm or less for the AMS-221EN.

AMS-221EN-2516

Automatic Bobbin Changer Thread Hot CutterRemaining Thread Sensor Colour Thread Monitoring System


AMS-224EN-4530 (X: 450mm × Y: 300mm)

AMS-224EN-6030 (X: 600mm × Y: 300mm)Computer-controlled Cycle Machine with Input Function

The machine achieves the highest sewing speed of 2,500sti/min among those with a similar sewing area. With its higher productivity, the machine performs various kinds of stitching, making the most out of its wider sewing area in various sewing applications such as attaching handles to bags and pouches, attaching belts, sewing many small parts at a time, attaching parts to shoes and sports shoes (one pair of shoes) and sewing air bags. A newly developed encoder-controlled stepping motor system has been adopted for the X-Y feed mechanism. This contributes to more accurate sewing performance and increased productivity.

{ihea

Model name AMS-224EN-HS AMS-224EN-GB

Application Medium- to heavy-weight Extra heavy-weight

Max. sewing speed 2,500sti/min (stitch length 3mm or less)

Settable stitch length 0.1~12.7mm (0.05mm step)




Needle DP×17 (#18) DP×17 (#23)

AMS-224EN-6030

AMS-210EN-HL1306/7300

AMS-210EN-HL1306/7300 (X: 130 × Y: 60mm)Computer-controlled Cycle Machine (for Extra Heavy-Duty Material)

The machine is designed for improved stitching with heavy thread tension. JUKI’s unique active tension mechanism which has been re-designed specifically for heavy-weight materials, as well as the special thread take up which is suited for sewing heavy-weight materials, increase the maximum tension by 50% more compared to that of the standard models of the JUKI AMS Series machines. The new model improves seam quality (thread tension) for sewing seat belts and general heavy-weight materials such as container belts and bags

{ihea

Model name AMS-210EN-HL1306/7300

Application Medium-to heavy-weight

Max. sewing speed 2,000sti/min (when stitch length is 4.5mm or less)

Thread take-up Slide-type thread take-up lever (dry frame)

Needle DP×17 #25 (max. #26)


AMS-221EN-TS3020 (X: 300 × Y: 200mm)Computer-controlled Cycle Machine with Input Function (for 2-color-thread sewing)

This machine (AMS221EN-TS) for two-color stitching has been developed to enable two-color stitching (with two kinds of thread which are different in color).Possible difference in position of the sewing product which can be caused by re-placing it on the sewing machine in a different process is eliminated, thereby increasing the productivity. It is suitable for sports shoes, bags and car seats such as the topstitch and parts sewing, etc.

{iea

Model name AMS-221EN-TS3020


Stitch length 0.1~12.7mm (0.05mm step)




Needle DP×17 (#18)

AMS-221EN-TS3020

Model name AMS-221EN2516/X7910

AMS-224EN6030/X7910

Sewing area 250mm (X) × 160mm (Y)

600mm (X) × 300mm (Y)

Max. sewing speed 1,500sti/min (stitch length 6mm or less)Settable stitch length 0.1~12.7mm (0.05mm step)Lift of the feeding frame Max. 30mm

Needle (at the time of delivery) DP×17 (#18)

Thread #50~#2Hook Double-capacity shuttle hook

Specifications that are not given above shall conform to those for the AMS-224EN and AMS-221EN.

AMS-224EN6030/X7910 (X: 600 × Y: 300mm)

AMS-221EN2516/X7910 (X: 250 × Y: 160mm)Computer-controlled Cycle Machine with an Input Function (For Total-area Perfect Stitching)AMS-224EN(AMS-221EN)/X7910 has removed the area where hitch stitches are produced to make the total area capable of sewing with perfect stitches, thereby improving the seam quality. Stitch knot formation has been developed so that the needle thread and the bobbin thread are at proper right angle resulting in flawless stitches. The machine comes with a double-capacity shuttle hook ideally suited for Total-area perfect stitching. This shuttle hook ensures a consistent thread tension by preventing the thread from being untwisted by its rotation.

{ieha

AMS-224EN6030/X7910


AMS221EN/JEUX0043AMS221EN/X7910/JEUX0043 (perfect stitch type)

AMS224EN/JEUX0043AMS224EN/X7910/JEUX0043 (perfect stitch type)Computer Controlled Cycle Machine with extension size available from X: 600-2100 , Y: up to 575 mm

Juki’s AMS 221 and 224 series is now available with an extended sewing area in a variety of different dimensions. The wider sewing area means the machine is new better suited to the sewing of decorative stitches on car seats. The machine not only achieves higher productivity due to instantaneous increases/decreases in sewing speed at the beginning /end of sewing and increased of thread trimming speed, but also achieves a flexible responsiveness to materials to promise enhanced seam quality due to JUKI’s unique active tension and programmable intermediate presser.

{ihea

AMS-221EN-3020

Model name Sewing Area

AMS221ENHL2516SZ5000NSD/JEUX0043-100X 1000 x 160

AMS221ENHL2516SZ/X7910NSD/JEUX0043-100X 1000 x 160, Perfect Stitch

AMS221ENHS3020SZ5000NSF/JEUX0043-100X 1000 x 200

AMS224ENHS6030SZ/X7910NSF/JEUX0043-100X 1000 x 300, Perfect Stitch

AMS224ENHS4530SZ5000NSF/JEUX0043-6060 600 x 575


AMS224ENHS6030SZ/X7910NSF/JEUX0043-8060 800 x 575, Perfect Stitch


AMS224ENHS6030SZ/X7910NSF/JEUX0043-12060 1200 x 575, Perfect Stitch




MO-6900G SeriesOverlock / Safety Stitch Machine for Extra Heavy-weight Materials

The machine incorporates a mechanism and parts that are optimum for the sewing of extra heavy-weight materials, such as an extra high-lift type upper looper, tractor foot and coarse type feed dog. It demonstrates an excellent performance ability in the sewing of various kinds of heavy-weight materials such as jeans, raised fabric materials, mats and carpets.

jl

Model name MO-6905G-0M6-7E0

Application For car mats

Stitch type 1-needle overlock


Overedging width 10mm


Needle DC×1 (#24)

MO-6905G

LBH-1790A SeriesComputer-controlled, High-speed, Lockstitch Buttonholing Machine

The knife supports sewing lengths of 41mm at the maximum. Since the LBH-1795AS is provided as standard with the 120 mm presser, it is capable of sewing12-mm long buttonholes. The LBH-1795AS is capable of sewing long buttonholes such as belt holes in car seats. In addition, it is applicable to the sewing of buttonholes in men’s shirts (continuous sewing of two buttonholes and the use of two units of sewing machines), etc.The upper limit of the adjustment of the presser foot pressure has been expanded. The presser foot pressure is now digitally controlled. As a result, the machine acquires improved responsiveness to knit materials and car seats.

{jih9

Model name LBH-1790A


Bartacking width Max. 10mm

Max. button length Max. 120mm (with device)

Number of standard patterns 31 patterns

Needle DP×5 (#11J) #11J~#14J

Optional part No. Qty Name of part

40006335 1 Presser arm 120

40008646 1 Presser foot 120 asm.

40008658 1 Presser foot 120

SS6060210SP 2 Screw

40028682 1 Close cam 120

40112711 1 Lifting plate 120

SM6050800SP 2 Screw

40006339 1 Cloth feed plate 120

LBH-1790A

LBH-1795A (120mm buttonhole)

Optional Parts Needed for 120mm buttonhole

43OTHERS

SC-922/M51NControl Box / Servomotor

Power consumption during standby as well as operation has been reduced making this more environmentally friendly. High-torque AC servomotor M51N with an output of 750W has been adopted which make this suitable for heavy weight materials. The machine has excellent high-speed sewing performance and a strong cloth-penetrating force. The machine therefore demonstrates a broader range of applicability and is suited to non-apparel machines/ production.

Model name SC-922/M51NMotor output 750W

Power requirement Single-phase 100~120V, 200~240V 3-phase 200~240V

Number of input ports Max.24 *1 (for optional inputs)Number of output ports Max.32 *1 (for optional outputs)

Number of basic programs*2 4

Number of basic programs steps 25 sewing steps (per 1 program)

SC-922/M51N

*1 It depends on installed machine head.*2 Basic programs are intended to operate external devices such as the stacker

or to change the sewing machine operation during sewing.

MOTORS AND DEVICES44

PM-1Programming Software for Computer-controlled Sewing Machines

This software is to input and edit sewing data of JUKI’s latest sewing machines. Its versatile input functions allow to input sewing data of each electronic sewing machine model easily, accurately, and quickly. It supports high quality production with high added value by utilizing and creating original data for specific designs and applications.

*The IP-420 is configured with a USB connector, as standard.

System Formation

IT-100 Series ROM Writer Digitizer

Scanner

CompactFlash

Mouse

Floppy disk

Mouse

IP-310 SeriesIP-420 Series

PM-3Programming Software for Computer-controlled Sewing Machines

This software is developed exclusively for creating embroidery data. With the software, the operator is able to enter/edit new/existing data. Embroidery data can be easily created simply by inputting the character to be embroidered, selecting the font and clicking the relevant icon. Not only enlargement/reduction in size, rotation, move and copy of the characters, but also changes in sewing pitch and stitching order and the insertion of thread trimming can be carried out with ease. It is also possible to read images through the scanner to create data on embroidery (single-pattern embroidery). True Type Fonts prepared by Windows are also applicable. The sewing machine supports three different languages; English, Chinese and Japanese.

JUKI CENTRAL EUROPE

JUKI CENTRAL EUROPE SP. Z O.O.ul. Poleczki 21 - Platan Park C02-822 Warsaw, PolandPhone:+(48) 22-5450400Fax:+(48) 22-5450411

www.juki-europe.com

* Specifications and appearance are subject to change without prior notice for improvement.

Documents

2017 el Sewing Machinesal Catalogue - cucitomania.it · intro 3 juki genuine spare parts 6 flat-bed sewing machine ddl-8700l 8 ddl8100eh/x73141 8 ddl-5600n-7 9 ddl-5600n 9 du-1281-7