Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Grès porcellanatoPorcelain stoneware
Grès cérame coloréFeinsteinzeug
technical projectPregio e sicurezzaLe possibilità applicative del grès porcellanato per pavimentazioni in spazi interni ed esterni sono vastissime e destinate a superfici alternative, sia di uso pubblico che privato.Materia pregiata con caratteristiche tecniche e prestazionali impareggiabili.
High quality and safetyPorcelain tiles offer a huge range of different possibilities for indoor and outdoor finishings intended for both private and public areas. Fine-quality material with unique technical and well-performing features.
Qualité et sécuritéLes possibilités d’application du grès cérame pour les sols d’intérieur et extérieur sont innombrables et destinées à des surfaces alternatives, aussi bien dans le secteur public que privé.Une matière de grande qualité possédant des caractéristiques techniques et uniques.
Prestige und SicherheitEs gibt zahlreiche Einsatzmöglichkeiten für Feinsteinzeug als Fußboden in Innen- und Außenbereichen für alternative Anwendungen, in öffentlichen und privaten Oberflächen.Ein kostbares mit unvergleichbaren technischen Merkmalen und Leistungen.
2cmSpessore
ThicknessÉpaisseur
Stärke FP-2Atelier FP2 6 Cor-Stone FP2 22 Decapé FP2 32 Durango FP2 24 Edelweiss FP2 26 Fjord FP2 34 Grey Soul FP2 14 Limestone FP2 10
Meteora FP2 16My S'tile FP2 8North Wind FP2 36Pierre Bleue FP2 20Sparkly FP2 30Technika FP2 12Terraforte FP2 28Thunderwood FP2 38
4
consigli di posa, pulizia e manutenzione FP2
laying recommendations, cleaning and care of FP2 products
conseils de pose, nettoyage et entretien des articles FP2
ratschläge für die verlegung, reinigung und pflege der produkte von FP2
simbologia caratteristiche tecniche
symboles technical characteristics symboles des caracteristiques techniques
symbole technischen eigenschaften
tabella pesi ed imballi sizes weight and packaging
mesures poids et emballages tabelle der gewichte und verpackungen
40
41
42
-2- -3-
Posa a secco su sabbia Dry laying on sand Pose à sec sur sable Trockenverlegung auf Sand
Posa a secco su ghiaiaDry laying on gravelPose à sec sur gravierTrockenverlegung auf Kies
Posa su massetto con colla Laying on screed with adhesive Pose sur chape avec de la colle Verlegung auf Estrich mit Kleber
Posa sopraelevataRaised installationPose surélevée Verlegung als Doppelboden
Posa a secco su erbaDry laying on grassPose à sec en appui sur pelouse Trockenverlegung auf Gras
2cm20 mm
Tipologia di supporti per la posa sopraelevata Type of supports for raised floor laying
Typologie de supports pour la pose surélevée Trägerart für die Verlegung als Doppelboden
Supporto fisso . Fixed support Support fixe . Fester Träger
Supporto regolabile . Adjustable supportSupport réglable . Höhenverstellbarer Träger
Supporto autolivellante . Self-levelling support Support auto-nivelant . Selbstnivellierender Träger
SUPPORTISUPPORTSSUPPORTTRÄGER
ALTEZZAHEIGHT
HAUTEURHÖHE
SUPPORTO FISSOFIXED SUPPORT SUPPORT FIXE FESTER TRÄGER
15 mm
SUPPORTO REGOLABILEADJUSTABLE SUPPORTSUPPORT RÉGLABLEHÖHENVERSTELLBARER TRÄGER
25 - 40 mm
SUPPORTO AUTOLIVELLANTESELF-LEVELLING SUPPORT SUPPORT AUTO-NIVELANT SELBSTNIVELLIERENDER TRÄGER
37,5 - 50 mm
Esempi di posa . Laying scheme examples . Exemples de pose . Verlegebeispiele
Supporti fissiFixed supports - Support fixe - Fester Träger
Supporti regolabili e supporti autolivellantiAdjustable supports and self-leveling supports Supports réglables et supports auto-nivelantsHöhenverstellbarer Träger und Selbstnivellierender Träger
90x90 cm - 36”x36” 61,5x61,5 cm - 24”x24” 40x122,6 cm - 16”x48”
Suggerimenti per la posa flottante
Raccomandiamo l’uso di un supporto centrale alla lastra al fine di distribuire in modo omogeneo i carichi.
Tips for floating installation
We recommend the use of a central slab support in order to distribute the loads equally.
Empfehlungen für die schwimmende verlegung
Wir empfehlen die Verwendung von in der Mitte anzubringenden Stützen, damit die Belastung gleichmäßig verteilt wird.
Conseils pour la pose flottante
Nous recommandons l’utilisation d’un support central sous la dalle afin de répartir uniformément les charges.
outdoor
technical project
2cm
SpessoreThicknessÉpaisseur
Stärke
Materia pregiata e spessorata (2 cm) con caratteristiche tecniche e prestazionali impareggiabili. Un progetto esclusivo ed ambizioso, tecnologicamente avanzato.Ideale per applicazioni outdoor. Eccezionale per applicazioni a secco su erba, ghiaia, massetto, sabbia e posa sopraelevata.Pratico e facile da posare. Fruibile in tempo reale.
RACCOMANDAZIONI SULLA POSA, PULIZIA E MANUTENZIONE FP2Per la posa dei materiali FP2 rettificati mantenere una fuga minima di 3 mm. Da una piastrella all’altra usufruendo di stucchi e sigillanti di colore coordinato a quello del materiale. Nella posa dei materiali retti cati rettangolari, è importante evitare di far collimare i vertici di una piastrella con la metà delle altre, al ne di sopperire alle eventuali imperfezioni di planarità presenti comunque in tutti i grandi formati. Trattandosi di materiale tagliato e rettificato, per evitare questo problema, è consigliabile posare il materiale a correre, con intervallo da 0 a 15 cm. E’ fortemente auspicabile af dare la posa a personale esperto che, dopo aver veri cato la corretta planarità della caldana e la qualità del materiale, contribuirà alla impeccabile esecuzione dell’incarico.
Tuscania consiglia di effettuare le operazioni di pulizia ordinaria delle superfici pavimentate con FP2 ricorrendo a acqua e normali detergenti neutri: la pendenza della superficie e gli spazi tra le lastre nelle pose a secco facilitano il naturale deflusso delle acque.Si consideri tuttavia che qualunque tipo di pavimentazione è soggetta al fenomeno della tensione superficiale dei liquidi: si tratta della stessa proprietà dell’acqua che le conferisce la tendenza a distribuirsi in gocce sferiche, o che causa la formazione della classica bombatura in un bicchiere pieno di acqua oltre il colmo.La tensione superficiale può impedire un completo scolo dell’acqua, e causare lo stazionamento temporaneo di una patina di liquido in corrispondenza dei bordi delle lastre. Per ovviare a questo problema, Tuscania raccomanda di prevedere le opportune pendenze della superficie in fase di installazione, per facilitare il deflusso delle acque negli spazi tra le lastre. Se dovesse persistere una patina di acqua, si consiglia di spingerla verso le fughe con uno spazzolone, oppure di rimuoverla con un aspira liquidi.
Fine-quality and thickened (2 cm) material with unrivalled technical characteristics and performances.An exclusive, ambitious,technologically advanced project. Ideal for outdoor applications.Exceptional for dry applications on grass, gravel, slabs, sand and raised installation. Practical and easy to lay. Ready to use.
PORCELAIN TILES IN 20MM THICKNESS (FP2) FOR OUTDOOR FLOORS RECOMMENDATIONS FOR THE INSTALLATION, CLEANING AND MAINTENANCEFor the installation of FP2 rectified materials maintain a gap between the tiles of at least 3 mm. Using grouts and sealers that are colour co-ordinated with the material. When laying rectangular recti ed material, it is important to avoid placing the edges of each tile next to the halves of others in order to compensate for any imperfections in atness that are, however, always present in large sizes. As this is cut and recti ed material to avoid the problem it is recommended to lay the material in a straightforward design with an interval from 0 to 15 cm. Between each tile as per the pattern shown below. It is highly suggested to have the installation done by quali ed experts who, after checking the proper atness of the concrete slab and the quality of the material, will contribute to carrying out of the job awlessly.
Tuscania recommends carrying out the procedures for the ordinary cleaning of FP2 floor surfaces using water and commercially available neutral detergents: the inclination of the surface and the space between adjacent slabs for dry-system installation favour the natural flow of water.However, it is important to take into consideration that any type of floor surface is subject to the surface tension effect of liquids: it is the same property of water that gives the tendency to transform into spherical droplets and which cause the curved top surface of a glass full of water.The surface tension can obstacle the complete drainage of water and cause a temporary stagnation of liquid on the slab edges. In order to avoid this problem, Tuscania recommends ensuring adequate inclination of the surface during installation so as to encourage the flow of water between adjacent slabs. Should liquid deposit on the surface, it is recommended to push it towards grout lines using a brush or remove it with a wet and dry vacuum cleaner.
Une matière de grande qualité et l’épaisseur majorée (2 cm) possédant des caractéristiques techniques et performancielles sans pareilles.Un projet exclusif et ambitieux, à la pointe de la technologie. Idéal pour des applications à l’extérieur. Exceptionnel pour des applications à sec en appui sur pelouse, gravier, chape, sable et pose surélevée. Pratique et facile à poser. Piétinable immédiatement après la pose.
GRÈS CÉRAME EN 20 MM (FP2) D’ÉPAISSEUR POUR DES SOLS EXTÉRIEURS CONSEILS SUR LA POSE, NETTOYAGE ET ENTRETIENPour poser les matériaux FP2 rectifiés, garder un joint minimum de 3 mm entre deux carreaux, en appliquant des produits de remplissage des joints et des produits de scellement d’une teinte assortie à celle du matériau. Au cours de la pose des materielle recti és rectangulaires, il est important d’éviter de faire coïncider les angles d’un carreau avec la moitié des autres, a n de faire face aux éventuelles imperfections de planéité qui, d’une manière ou d’une autre existent toujours dans les grands formats. Étant donné qu’il s’agit de materielle coupé et recti é, pour éviter ce problème, il est préconisé de poser le matériau en alignement continu, avec un intervalle de 0 à 15 cm. Il est vivement recommandé de con er la pose aux soins d’un carreleur compétent qui, après avoir véri é si la planéité de la sous-couche isolante est correcte et jugé de la qualité du materielle, contribuera, par son expérience, à une exécution impeccable.
Tuscania conseille d’effectuer les opérations de nettoyage ordinaire des surfaces carrelées avec FP2 en utilisant de l’eau et des détergents neutres communs: l’inclinaison de la surface et les espaces entre les dalles dans les poses à sec facilitent l’écoulement naturel de l’eau.Considérez cependant que tout type de sol est soumis au phénomène de la tension superficielle des liquides: il s’agit de la même propriété de l’eau qui lui donne la tendance à se répandre en gouttes sphériques, ou qui entraîne la formation classique de la surface bombée d’un verre d’eau rempli à ras bord.La tension superficielle peut empêcher l’écoulement de l’eau, et causer la stagnation temporaire d’une légère patine d’eau au niveau des bords des dalles. Pour résoudre ce problème, Tuscania conseille de prévoir les pentes opportunes de la surface en phase d’installation, pour faciliter l’écoulement des eaux dans les espaces entre les dalles. Si la patine d’eau persiste, il est conseillé de la pousser vers les joints à l’aide d’une brosse à carrelage ou bien de l’éliminer avec un aspirateur à liquide
Ein kostbares und extra starkes Material mit unvergleichbaren technischen Merkmalen und Leistungen. Ein exklusives fortgeschrittenes Projekt. Ideal für Outdoor-Anwendungen.Bestens für die trockene Verlegung auf Gras, Kies, Estrich, Sand und als Doppelboden geeignet.Praktisch und einfach zu verlegen. In Echtzeit nutzbar.
20 MM (FP2) STARKES FEINSTEINZEUG FÜR AUSSENBODENBELÄG EMPFEHLUNGEN FÜR DIE VERLEGUNG, REINIGUNG UND PFLEGEBei der Verlegung von FP2 geschliffenen Fliesen, eine Fuge von mindestens 3 mm vorzusehen und Fugen- und Dichtmassen mit einer solchen Färbung zu verwenden, die zu den Farbtönen der Fliesen passt. Bei der Verlegung von rechteckig geschliffenen Fliesen ist infolge der auf sämtlichen großen Formaten vorhandenen Ebenheitsfehler darauf zu achten, dass die oberen Ränder einer Fliese nicht mit der Mitte der anderen Fliesen zusammentreffen. Da es sich um geschnittenes und geschliffenes Material handelt, kann dieses Problem dadurch gelöst werden, dass man die Fliesen fortlaufend, mit einem Zwischenraum von 0 bis 15 cm verlegt. Es ist absolut empfehlenswert, dass die Verlegung von Fachpersonal mit der nötigen Erfahrung ausgeführt wird, das nach der Überprüfung des Estrichs auf einwandfreie Ebenheit und der Qualität des Materials die ihm anvertraute Arbeit anstandslos ausführen wird.
Tuscania empfiehlt, zur normalen Reinigung der mit FP2 verlegten Flächen Wasser und normale, neutrale Reinigungsmittel zu verwenden; das Gefälle der Flächen und die im Trockenbau entstehenden Zwischenräume zwischen den Platten erleichtern das natürliche Abfließen des Wassers. Auf jeder Art von Bodenbelag kommt es jedoch zur Oberflächenspannung der Flüssigkeiten: es handelt sich um ein Merkmal des Wassers selbst, das sich in runden Tropfen verteilt bzw. die klassische Wölbung in einem randvoll gefüllten Glas aufweist. Die Oberflächenspannung kann das vollständige Ablaufen des Wassers behindern und dazu führen, dass sich vorübergehend Flüssigkeit an den Plattenrändern ansammelt.Um dieses Problem zu vermeiden, empfiehlt Tuscania, bei der Installation für eine angemessene Neigung der Fläche zu sorgen, damit das Wasser über die Zwischenräume ablaufen kann. Auf der Oberfläche stagnierendes Wasser sollte mit einer Bürste in die Zwischenräume gedrückt oder mit einem Allessauger abgesaugt werden.
-4- -5-
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
outdoor
technical project
GRIS FP2 | 90x90 cm RS_36”x36” RS
ATELIER
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
round angolare 45x90 cm 18”x36” angolo SX angolo DX
greige
brun
blanc
gris
round lineare 45x90 cm 18”x36”
greige
brun
blanc
gris
HDR11FP2
HIGH
V3
20 mm
FP2
angolare elemento “L” 45x90x5 cm 18”x36” x2”
greige
brun
blanc
gris
elemento “L” 45x90x5 cm 18”x36” x2”
greige
brun
blanc
gris
griglia 20x90 cm 8”x36” R
greige
brun
blanc
gris
R griglia angolo 20x90 cm 8”x36” R
angolo SX angolo DX
R
greige
brun
blanc
gris
154,33/PZ 228,40/PZ 195,99/PZ 419,76/coppia
angolo bordo toro 45x90 cm 18”x36” angolo SX angolo DX
greige
brun
blanc
gris
222,23/PZ326,55/coppia138,89/PZ
ATELIER
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
RS
90x90 cm RS . 36”x36” RS
FP2
greige
20 mm
L7V9 90x90 cm 36”x36” FP2 RS 71,00
brun
20 mm
L8V0 90x90 cm 36”x36” FP2 RS 71,00
blanc
20 mm
L7V8 90x90 cm 36”x36” FP2 RS 71,00
gris
20 mm
L8V1 90x90 cm 36”x36” FP2 RS 71,00
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.Rettificato/Strutturato Rectified/TexturedRS
GREIGE BRUN BLANC GRIS
-6- -7-
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
outdoor
technical project
SAND FP2 | 90x90 cm RS_36”x36 ” RS - 40x122,6 cm RS_16”x48” RS - elemento a L 40x122,6x5 cm_16”x48”x2"
MY S'TILE
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
HDR11FP2
HIGH
V3
20 mm
FP2
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
my sand
20 mm
L9V8 90x90 cm 36”x36” FP2 RS 71,00
L9V7 40x122,6 cm 16”x48” FP2 RS 72,54
my grey
20 mm
L0W0 90x90 cm 36”x36” FP2 RS 71,00
L9V6 40x122,6 cm 16”x48” FP2 RS 72,54
my camel
20 mm
L9V9 90x90 cm 36”x36” FP2 RS 71,00
FP2
RS
*90x90 cm RS . 36”x36” RS*my sand, my camel, my grey
MY S'TILERS
*40x122,6 cm RS . 16”x48” RS* my sand, my grey
FP2 Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
MY SANDMY CAMEL MY GREY
Rettificato/Strutturato Rectified/TexturedRS
round angolare •45x90 cm 18”x36”*40x122,6 cm 16”x48”
angolo SX angolo DX
•/*my sand •my camel•/*my grey
round lineare •45x90 cm 18”x36”*40x122,6 cm 16”x48”
•/*my sand •my camel•/*my grey
angolare elemento “L” •45x90x5 cm 18”x36” x2” *40x122,6x5 cm 16”x48” x2”
•/*my sand •my camel•/*my grey
elemento “L” •45x90x5 cm 18”x36” x2”*40x122,6x5 cm 16”x48” x2”
•/*my sand •my camel•/*my grey
griglia •20x90 cm 8”x36” R*20x61 cm 8”x24” R
•/*my sand •my camel•/*my grey
R
griglia angolo •20x90 cm 8”x36” R*20x61 cm 8”x24” R
angolo SX angolo DX
R
•/*my sand •my camel•/*my grey
228,40/PZ 195,99/PZ
angolo bordo toro •45x90 cm 18”x36” *40x122,6 cm 16”x48”
•/*my sand •my camel•/*my grey
154,33/PZ R
361,12/PZ 441,36/coppia
361,12/PZ682,10/coppia317,91/PZ
441,36/PZ 200,62/PZ R
419,76/coppia
138,89/PZ 326,55/coppia
angolo SX angolo DX
222,23/PZ
-8- -9-
outdoor
technical project
COAL FP2 | 61,0x61,0 cm RS_24”x24” RS - griglia 20x61,0 cm_8”x24” - griglia angolo SX 20x61,0 cm_8”x24” - griglia angolo DX 20x61,0 cm_8”x24”
LIMESTONEHDR11
FP2HIGH
V3
20 mm
FP2
LIMESTONE61,0x61,0 cm RS .24”x24” RS
RS
FP2
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
angolare elemento “L” 30x30x5 cm 12”x12”x2”
ice
coal
beige
ash
elemento “L” 30x61,0x5 cm 12”x24”x2”
ice
coal
beige
ash
griglia 20x61,0 cm 8”x24” R
ice
coal
beige
ash
griglia angolo 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
ice
coal
beige
ash
R100,00/PZ 117,59/PZ 117,59/PZ 256,17/coppia
ice
coal
beige
ash
ice
coal
beige
ash
angolo bordo toro 30x61,0 cm 12”x24” angolo SX angolo DX
round angolare 30x61,0 cm 12”x24” angolo SX angolo DXround lineare
30x61,0 cm 12”x24”
ice
coal
beige
ash
145,06/PZ234,57/coppia100,00/PZ
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
coal
20 mm
L5W9 61,0x61,0 cm 24”x24” FP2 RS 55,56
beige
20 mm
L4W9 61,0x61,0 cm 24”x24” FP2 RS 55,56
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet. Rettificato/Strutturato Rectified/TexturedRS
ash
20 mm
L8X9 61,0x61,0 cm 24”x24” FP2 RS 55,56
COAL BEIGEICE ASH
ice
20 mm
L4W9 61,0x61,0 cm 24”x24” FP2 RS 55,56
-10- -11-
TECHNIKA
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
GRIGIO ANTRACITE
outdoor
technical project
ANTRACITE FP2 | 61,0x61,0 cm RS_24”x24” RS
TECHNIKA
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
angolare elemento “L” 30x30x5 cm 12”x12”x2”
grigio
antracite
elemento “L” 30x61,5x0 cm 12”x24”x2”
grigio
antracite
angolo bordo toro 30x61,0 cm 12”x24” angolo SX angolo DX
grigio
antracite
round angolare 30x61,0 cm 12”x24” angolo SX angolo DX
grigio
antracite
round lineare 30x61,0 cm 12”x24”
grigio
antracite
griglia 20x61,0 cm 8”x24” R
grigio
antracite
griglia angolo 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
grigio
antracite
Rettificato/Strutturato - Rectified/TexturedRS
R
R11FP2
20 mm
FP2
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
HD
MODERATE
V2
100,00/PZ 117,59/PZ 117,59/PZ 256,17/coppia
145,06/PZ234,57/coppia100,00/PZ
20 mm
antracite
RS
61,0x61,0 cm RS . 24”x24” RS
FP2
grigio
20 mm
I5O2 61,0x61,0 cm 24”x24” FP2 RS 55,56 I8N3 61,0x61,0 cm 24”x24” FP2 RS 55,56
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
-12- -13-
R11FP2
20 mm
FP2
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
HD
HIGH
V3
SAND LIGHT MID DARK
GREY SOUL
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Rettificato/Strutturato - Rectified/TexturedRS
Note - Notes - Notes - AnmerkungenI pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
angolare elemento “L” *45x90x5 cm 18”x36”x2” •30x30x5 cm 12”x12”x2”40x122,6x5 cm 16”x48” x2”
*/• sand*/•/ light*/•/ mid*/•/ dark
elemento “L” *45x90x5 cm 18”x36” x2” •30x61,0x5 cm 12”x24”x2”40x122,6x5 cm 16”x48” x2”
*/• sand*/•/ light*/•/ mid*/•/ dark
griglia *20x90 cm 8”x36” R•20x61 cm 8”x24” R20x61 cm 8”x24” R
*/• sand*/•/ light*/•/ mid*/•/ dark
R
Rgriglia angolo *20x90 cm 8”x36” R •20x61,0 cm 8”x24” R 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
R
*/• sand*/•/ light*/•/ mid*/•/ dark
outdoor
technical project
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
DARK e LIGHT FP2 | 61,0x61,0 cm RS_24”x24” RS
GREY SOUL
sand light
20 mm 20 mm
mid dark
20 mm 20 mm
100,00/PZ154,33/PZ
117,59/PZ228,40/PZ
117,59/PZ195,99/PZ
256,17/coppia419,76/coppia
angolo bordo toro *45x90 cm 18”x36” •30x61,0 cm 12”x24” 40x122,6 cm 16”x48”
angolo SX angolo DX
*/• sand*/•/ light*/•/ mid*/•/ dark
round angolare *45x90 cm 18”x36” •30x61,0 cm 12”x24” 40x122,6 cm 16”x48”
angolo SX angolo DX
*/• sand*/•/ light*/•/ mid*/•/ dark
round lineare *45x90 cm 18”x36”•30x61,0 cm 12”x24”40x122,6 cm 16”x48”
*/• sand*/•/ light*/•/ mid*/•/ dark
145,06/PZ222,23/PZ
234,57/coppia326,55/coppia
100,00/PZ138,89/PZ
H3U7 61,0x61,0 cm 24”x24” FP2 RS 55,56
H6Z6 45x90 cm 18”x36” FP2 RS 55,56
L8T8 40x122,6 cm 16”x48” FP2 RS 72,54
L5T2 90x90 cm 36”x36” FP2 RS 71,00
I7H0 61,0x61,0 cm 24”x24” FP2 RS 55,56
L5T0 90x90 cm 36”x36” FP2 RS 71,00
H4U1 61,0x61,0 cm 24”x24” FP2 RS 55,56
H6Z8 45x90 cm 18”x36” FP2 RS 55,56
L8T9 40x122,6 cm 16”x48” FP2 RS 72,54
L5T1 90x90 cm 36”x36” FP2 RS 71,00
H3U9 61,0x61,0 cm 24”x24” FP2 RS 55,56
H6Z7 45x90 cm 18”x36” FP2 RS 55,56
L8T7 40x122,6 cm 16”x48” FP2 RS 72,54
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it web code eingeben, an der Seite von Formaten angedeutet.
RS
*90x90 cm RS . 36”x36” RS*sand, mid, dark
FP2
RS
*40x122,6 cm RS . 16”x48” RS*light, mid, dark
FP2RS
*61,0x61,0 cm RS . 24”x24” RS*sand, light, mid, dark
FP2
361,12/PZ
361,12/PZ682,10/coppia
441,36/PZ 200,62/PZR 441,36/coppiaR
317,91/PZ
*45x90 cm RS . 18”x36” RS*light, mid, dark
RS
FP2
-14- -15-
outdoor
METEORA
technical projecttechnical project
BEIGE COTTO GRIGIO MIX
GRIGIO FP2 | 90x90 cm RS _36”x36” RSwall: BRICKS CLASSIC | 37,5x75 cm R_15”x30” R
Una linea di alto impatto estetico, risultato di un ricercato progetto basato su una tecnologia
d'avanguardia specifica per gli alti spessori. La materia ceramica si modifica e si evolve secondo schemi tradizionali
che hanno come termine di paragone la pietra naturale.
A captivating line resulting from a detailed project based on cutting-edge technology specific for high thicknesses.
The ceramic material changes and evolves according to traditional schemes inspired by natural stone.
Une ligne esthétiquement très impactante, issue d’un projet complexe basé sur une technologie de pointe, spécifique pour les épaisseurs majorées.
La matière céramique change et évolue selon des schémas traditionnels inspirés de la pierre naturelle.
Eine Serie mit einem hohen ästhetischen Eindruck, Ergebnis eines erlesenen Projekts, das sich auf eine spezifische fortschrittliche
Technologie für hohe Stärken stützt.Die Materie Keramik ändert und entwickelt sich gemäß
traditionellen Schemen, die als Inspiration Naturstein nutzen.
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
-16- -17-
METEORAHDR11
FP2
20 mm
FP2
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
RANDOM
V4
mix
20 mm
M5D0 90x90 cm 36”x36” FP2 RS 71,00
L7W1 90x90 cm 36”x36” DECORO FP2 RS 80,25
L6T4 61,0x61,0 cm 24”x24” FP2 RS 55,56
L7W4 61,0x61,0 cm 24”x24” DECORO FP2 RS 64,82
beige
20 mm
L5T4 90x90 cm 36”x36” FP2 RS 71,00
L6W9 90x90 cm 36”x36” DECORO FP2 RS 80,25
L6T5 61,0x61,0 cm 24”x24” FP2 RS 55,56
L7W2 61,0x61,0 cm 24”x24” DECORO FP2 RS 64,82
cotto
20 mm
L5T5 90x90 cm 36”x36” FP2 RS 71,00
M5D8 90x90 cm 36”x36” DECORO FP2 RS 80,25
grigio
20 mm
L5T6 90x90 cm 36”x36” FP2 RS 71,00
L7W0 90x90 cm 36”x36” DECORO FP2 RS 80,25
L0U7 61,0x61,0 cm 24”x24” FP2 RS 55,56
L7W3 61,0x61,0 cm 24”x24” DECORO FP2 RS 64,82
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
angolare elemento “L” *45x90x5 cm 18”x36” x2” •30x30x5 cm 12”x12”x2”
*/•beige *cotto*/•grigio*/•mix
elemento “L” *45x90x5 cm 18”x36” x2” •30x61,0x5 cm 12”x24”x2”
*/•beige *cotto*/•grigio*/•mix
griglia *20x90 cm 8”x36” R•20x61,0 cm 8”x24” R
*/•beige *cotto*/•grigio*/•mix
R
Rgriglia angolo *20x90 cm 8”x36” R •20x61,0 cm 8”x24” R
angolo SX angolo DX
R
R
*/•beige *cotto*/•grigio*/•mix
angolo bordo toro *45x90 cm 18”x36” •30x61,0 cm 12”x24”
angolo SX angolo DX
*/•beige *cotto*/•grigio*/•mix
round angolare *45x90 cm 18”x36” •30x61,0 cm 12”x24”
angolo SX angolo DX
*/•beige *cotto*/•grigio*/•mix
round lineare *45x90 cm 18”x36”•30x61,0 cm 12”x24”
*/•beige *cotto*/•grigio*/•mix
Rettificato/Strutturato Rectified/TexturedRS
METEORA
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
100,00/PZ154,33/PZ
117,59/PZ228,40/PZ
117,59/PZ195,99/PZ
256,17/coppia419,76/coppia
145,06/PZ222,23/PZ
234,57/coppia326,55/coppia
100,00/PZ138,89/PZ
RS
*61,0x61,0 cm RS . 24”x24” RS*61,0x61,0 cm RS - DECORO . 24”x24” RS - DECORO *beige, grigio, mix
FP2
RS
*90x90 cm RS . 36”x36” RS*90x90 cm RS - DECORO . 36”x36” RS - DECORO*beige, cotto, grigio, mix
FP2
GRIGIO FP2 | 90x90 cm RS _36”x36” RS
-18- -19-
outdoor
PIERRE BLEUE
technical project
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
ANTIQUE
outdoor: ANTIQUE FP2 | 61,0x61,0 cm RS_24”x24” RSindoor: FONCÉ | 61,0x61,0 cm R_24”x24” R
PIERRE BLEUE
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
Rettificato/Strutturato - Rectified/TexturedRS
HDR11FP2
20 mm
FP2
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
HIGH
V3
clair
20 mm
L1U7 61,0x61,0 cm 24”x24” FP2 RS 55,56
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
angolare elemento “L” 30x30x5 cm 12”x12”x2”
clair
foncé
antique
elemento “L” 30x61,0x5 cm 12”x24”x2”
clair
foncé
antique
griglia 20x61,0 cm 8”x24” R
clair
foncé
antique
griglia angolo 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
clair
foncé
antique
R100,00/PZ 117,59/PZ 117,59/PZ 256,17/coppia
angolo bordo toro 30x61,0 cm 12”x24” angolo SX angolo DX
clair
foncé
antique
round angolare 30x61,0 cm 12”x24” angolo SX angolo DX
clair
foncé
antique
round lineare 30x61,0 cm 12”x24”
clair
foncé
antique
145,06/PZ234,57/coppia100,00/PZ
RS
*61,0x61,0 cm RS . 24”x24” RS*clair, foncé, antique
FP2
antique
20 mm
J2Q7 61,0x61,0 cm 24”x24” FP2 RS 55,56
foncé
20 mm
L1U8 61,0x61,0 cm 24”x24” FP2 RS 55,56
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
-20- -21-
L7R1 61,0x61,0 cm 24”x24” FP2 RS 55,56
L2U1 40x122,6 cm 16”x48” FP2 RS 72,54
outdoor
DARK
COR-STONE
technical project
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
DARK FP2 | 61,0x61,0 cm RS_24”x24” RS
COR-STONER11FP2
20 mm
FP2HD
RANDOM
V4
dark
20 mm
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
Rettificato/Strutturato - Rectified/TexturedRS
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
RS
61,0x61,0 cm RS. 24”x24” RS
FP2
RS
40x122,6 cm RS . 16”x48” RS
FP2 Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
round angolare 30x61,0 cm 12”x24” 40x122,6 cm 16”x48”
angolo SX angolo DX
dark
round lineare 30x61,0 cm 12”x24”40x122,6 cm 16”x48”
dark
angolare elemento “L” 30x30x5 cm 12”x12”x2” 40x122,6x5 cm 16”x48” x2”
dark
elemento “L” 30x61,0x5 cm 12”x24”x2”40x122,6x5 cm 16”x48” x2”
dark
griglia 20x61,0 cm 8”x24” R20x61 cm 8”x24” R
dark
R
griglia angolo 20x61,0 cm 8”x24” R20x61 cm 8”x24” R
angolo SX angolo DX
R
dark
117,59/PZ 117,59/PZ
angolo bordo toro 30x61,0 cm 12”x24”40x122,6 cm 16”x48”
dark
100,00/PZ R
361,12/PZ 441,36/coppia
361,12/PZ682,10/coppia317,91/PZ
441,36/PZ 200,62/PZ R
256,17/coppia
100,00/PZ 234,57/coppia
angolo SX angolo DX
145,06/PZ
-22- -23-
medium
R11FP2
20 mm
FP2
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
HD
RANDOM
V4
outdoor
technical project
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
DURANGORS
61,0x61,0 cm RS . 24”x24” RS
FP2
Rettificato/Strutturato - Rectified/TexturedRS
20 mm
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
angolare elemento “L” 30x30x5 cm 12”x12”x2”
medium
elemento “L” 30x61,0x5 cm 12”x24”x2”
medium
angolo bordo toro 30x61,0 cm 12”x24” angolo SX angolo DX
medium
round angolare 30x61,0 cm 12”x24” angolo SX angolo DX
medium
round lineare 30x61,0 cm 12”x24”
medium
griglia 20x61,0 cm 8”x24” R
medium
griglia angolo 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
medium
R
MEDIUM FP2 | 61,0x61,0 cm RS_24”x24” RS
DURANGO
MEDIUM
I4Z2 61,0x61,0 cm 24”x24” FP2 RS 55,56
100,00/PZ 117,59/PZ 117,59/PZ 256,17/coppia
145,06/PZ234,57/coppia100,00/PZ
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
-24- -25-
coal
GREY FP2 | 61,0x61,0 cm RS_24”x24” RS - elemento a L 30x61,0x5 cm_12”x24”x2” - angolare elemento a L 30x30x5 cm_12”x12”x2” - griglia 20x61,0 cm_8”x24” - griglia angolo SX 20x61,0 cm_8”x24” - griglia angolo DX 20x61,0 cm_8”x24”
grey
20 mm
outdoor
technical project
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
EDELWEISS
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
angolare elemento “L” 30x30x5 cm 12”x12”x2”
grey
coal
elemento “L” 30x61,0x5 cm 12”x24”x2”
grey
coal
angolo bordo toro 30x61,0 cm 12”x24” angolo SX angolo DX
grey
coal
round angolare 30x61,0 cm 12”x24” angolo SX angolo DX
grey
coal
round lineare 30x61,0 cm 12”x24”
grey
coal
griglia 20x61,0 cm 8”x24” R
grey
coal
griglia angolo 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
grey
coal
HDR11FP2
20 mm
FP2
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
HIGH
V3
R
EDELWEISS
GREY COAL
20 mm
100,00/PZ 117,59/PZ 117,59/PZ 256,17/coppia
145,06/PZ234,57/coppia100,00/PZ
I1U8 61,0x61,0 cm 24”x24” FP2 RS 55,56 I1U9 61,0x61,0 cm 24”x24” FP2 RS 55,56
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
RS
61,0x61,0 cm RS . 24”x24” RS Rettificato/Strutturato -
Rectified/TexturedRS
FP2
-26- -27-
CENERE
outdoor
TERRAFORTE
technical project
Grès porcellanato smaltatoGlazed porcelain stoneware . Grès cérame emaillé . Glasiertes feinsteinzeug
CENERE FP2 | 61,0x61,0 cm RS/BD_24”x24” RS/BD
RS/BD Rettificato strutturato/Bordo drittoRectified textured/Straight edges
TERRAFORTEHD
MODERATE
V2Grès porcellanato smaltatoGlazed porcelain stonewareGrès cérame emailléGlasiertes feinsteinzeug
R11FP2
20 mm
FP2
cenere
20 mm
L4U8 90x90 cm 36”x36” FP2 RS/BD 71,00
J2Q9 61,0x61,0 cm 24”x24” FP2 RS/BD 55,56
90x90 cm RS/BD . 36”x36” RS/BD
FP2
RS/BD
61,0x61,0 cm RS/BD . 24”x24” RS/BD
FP2
RS/BD
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
angolare elemento “L” 45x90x5 cm 18”x36”x2” 30x30x5 cm 12”x12”x2”
cenere
elemento “L” 45x90x5 cm 18”x36” x2” 30x61,0x5 cm 12”x24”x2”
cenere
griglia 20x90 cm 8”x36” R20x61,0 cm 8”x24” R
cenere
R
Rgriglia angolo 20x90 cm 8”x36” R 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
R
cenere
100,00/PZ154,33/PZ
117,59/PZ228,40/PZ
117,59/PZ195,99/PZ
256,17/coppia419,76/coppia
angolo bordo toro 45x90 cm 18”x36” 30x61,0 cm 12”x24”
angolo SX angolo DX
cenere
round angolare 45x90 cm 18”x36” 30x61,0 cm 12”x24”
angolo SX angolo DX
cenere
round lineare 45x90 cm 18”x36”30x61,0 cm 12”x24”
cenere
145,06/PZ222,23/PZ
234,57/coppia326,55/coppia
100,00/PZ138,89/PZ
-28- -29-
R11FP2
20 mm
FP2
Impasto ColoratoColored BodyMasse ColoréeDurchgefärbt
HD
RANDOM
V4
ruggineoutdoor
technical project
Grès porcellanato impasto coloratoColor body porcelain stoneware . Grès cérame coloré dans la masse . Durchgefärbtes feinsteinzeug
SPARKLYSPARKLY
RUGGINE
20 mm
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
angolare elemento “L” 30x30x5 cm 12”x12”x2”
ruggine
elemento “L” 30x61,0x5 cm 12”x24”x2”
ruggine
angolo bordo toro 30x61,0 cm 12”x24” angolo SX angolo DX
ruggine
round angolare 30x61,0 cm 12”x24” angolo SX angolo DX
ruggine
round lineare 30x61,0 cm 12”x24”
ruggine
griglia 20x61,0 cm 8”x24” R
ruggine
griglia angolo 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
ruggine
R
RUGGINE FP2 | 61,0x61,0 cm RS_24”x24” RS
100,00/PZ 117,59/PZ 117,59/PZ 256,17/coppia
145,06/PZ234,57/coppia100,00/PZ
H3U5 61,0x61,0 cm 24”x24” FP2 RS 55,56
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
61,0x61,0 cm RS . 24”x24” RS Rettificato/Strutturato -
Rectified/TexturedRS
FP2
-30- -31-
DECAPÉ
Grès porcellanato smaltatoGlazed porcelain stoneware . Grès cérame emaillé . Glasiertes feinsteinzeug
outdoor
technical project
NOCE FP2 | 40x122,6 cm RS_16”x48” RS
DECAPÉ
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
HDR11FP2
HIGH
V3
20 mm
FP2
Grès porcellanato smaltatoGlazed porcelain stonewareGrès cérame emailléGlasiertes feinsteinzeug
20 mm 20 mm
miele noce
L6U1 40x122,6 cm 16”x48” FP2 RS 72,54 L6U2 40x122,6 cm 16”x48” FP2 RS 72,54
RS
40x122,6 cm RS . 16”x48” RS
FP2
MIELE NOCE
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
round angolare 40x122,6 cm 16”x48”
angolo SX angolo DX
miele
noce
round lineare 40x122,6 cm 16”x48”
miele
noce
angolare elemento “L” 40x122,6x5 cm 16”x48” x2”
miele
noce
elemento “L” 40x122,6x5 cm 16”x48” x2”
miele
noce
griglia 20x61 cm 8”x24” R
miele
noce
griglia angolo 20x61 cm 8”x24” R
angolo SX angolo DX
R
miele
noce
angolo bordo toro 40x122,6 cm 16”x48”
miele
noce
R361,12/PZ 441,36/coppia
361,12/PZ682,10/coppia317,91/PZ
441,36/PZ 200,62/PZ
angolo SX angolo DX
Rettificato/Strutturato - Rectified/TexturedRS
-32- -33-
FJORD
Grès porcellanato smaltatoGlazed porcelain stoneware . Grès cérame emaillé . Glasiertes feinsteinzeug
HONNING GRA
outdoor
technical project
HONNING FP2 | 40x122,6 cm RS_16”x48” RS
FJORD
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
HDR11FP2
HIGH
V3
20 mm
FP2
Grès porcellanato smaltatoGlazed porcelain stonewareGrès cérame emailléGlasiertes feinsteinzeug
20 mm 20 mm
honning gra
L7U1 40x122,6 cm 16”x48” FP2 RS 72,54 L7U0 40x122,6 cm 16”x48” FP2 RS 72,54
RS
40x122,6 cm RS . 16”x48” RS
FP2 Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
round angolare 40x122,6 cm 16”x48”
angolo SX angolo DX
honning
gra
round lineare 40x122,6 cm 16”x48”
honning
gra
angolare elemento “L” 40x122,6x5 cm 16”x48” x2”
honning
gra
elemento “L” 40x122,6x5 cm 16”x48” x2”
honning
gra
griglia 20x61 cm 8”x24” R
honning
gra
griglia angolo 20x61 cm 8”x24” R
angolo SX angolo DX
R
honning
gra
angolo bordo toro 40x122,6 cm 16”x48”
honning
gra
R361,12/PZ 441,36/coppia
361,12/PZ682,10/coppia317,91/PZ
441,36/PZ 200,62/PZ
angolo SX angolo DX
Rettificato/Strutturato - Rectified/TexturedRS
-34- -35-
NORTH WIND
Grès porcellanato smaltatoGlazed porcelain stoneware . Grès cérame emaillé . Glasiertes feinsteinzeug
BROWN MELANGEGREY
NORTH WIND
Note - Notes - Notes - AnmerkungenI pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
HDR11FP2
HIGH
V3
20 mm
FP2
Grès porcellanato smaltatoGlazed porcelain stonewareGrès cérame emailléGlasiertes feinsteinzeug
outdoor
technical project
GREY FP2 | 40x122,6 cm RS_16”x48” RS
brown
20 mm
grey
20 mm
melange
20 mm
I7E7 45x90 cm 18”x36” FP2 RS 55,56
L7U8 40x122,6 cm 16”x48” FP2 RS 72,54
I7E4 45x90 cm 18”x36” FP2 RS 55,56
L7U7 40x122,6 cm 16”x48” FP2 RS 72,54
I7E6 45x90 cm 18”x36” FP2 RS 55,56
L7U9 40x122,6 cm 16”x48” FP2 RS 72,54
RS
40x122,6 cm RS . 16”x48” RS
FP2 Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet. Rettificato/Strutturato - Rectified/TexturedRS
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
45x90 cm RS . 18”x36” RS
RS
FP2
angolare elemento “L” 45x90x5 cm 18”x36” x2” 40x122,6x5 cm 16”x48” x2”
grey
brown
melange
elemento “L” 45x90x5 cm 18”x36” x2” 40x122,6x5 cm 16”x48” x2”
grey
brown
melange
griglia 20x90 cm 8”x36” R20x61,0 cm 8”x24” R
grey
brown
melange
R
Rgriglia angolo 20x90 cm 8”x36” R 20x61,0 cm 8”x24” R
angolo SX angolo DX
R
R
grey
brown
melange
361,12/PZ154,33/PZ
441,36/PZ228,40/PZ
200,62/PZ195,99/PZ
441,36/coppia419,76/coppia
angolo bordo toro 45x90 cm 18”x36” 40x122,6 cm 16”x48”
angolo SX angolo DX
grey
brown
melange
round angolare 45x90 cm 18”x36” 40x122,6 cm 16”x48”
angolo SX angolo DX
grey
brown
melange
round lineare 45x90 cm 18”x36”40x122,6 cm 16”x48”
grey
brown
melange
361,12/PZ222,23/PZ
682,10/coppia326,55/coppia
317,91/PZ138,89/PZ
-36- -37-
THUNDERWOOD
Grès porcellanato smaltatoGlazed porcelain stoneware . Grès cérame emaillé . Glasiertes feinsteinzeug
SANDSTORMTHUNDERSTRUCK
THUNDERWOOD
Grès porcellanato smaltatoGlazed porcelain stoneware . Grès cérame emaillé . Glasiertes feinsteinzeug
outdoor
technical project
SANDSTORM FP2 | 40x122,6 cm RS_16”x48” RS
RANDOM
V4
HDR11FP2
20 mm
FP2
Grès porcellanato smaltatoGlazed porcelain stonewareGrès cérame emailléGlasiertes feinsteinzeug
20 mm 20 mm
thunderstruck sandstorm
L2W3 40x122,6 cm 16”x48” FP2 RS 72,54 L2W2 40x122,6 cm 16”x48” FP2 RS 72,54
Per la disponibilità articolo: www.tuscaniagres.it digitando il codice web segnalato a lato dei formati.For the item's availability: www.tuscaniagres.it
type the web code reported next to the sizes.Pour vérifier la disponibilité de l’article: www.tuscaniagres.it
en saisissant le code web indiqué à coté des formats.Für die Artikelverfügbarkeit: www.tuscanigres.it
web code eingeben, an der Seite von Formaten angedeutet.
RS
40x122,6 cm RS . 16”x48” RS
FP2
Rettificato/Strutturato - Rectified/TexturedRS
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).
Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
FP2 pezzi speciali - special pieces - pièces spéciales - formteile
round angolare 40x122,6 cm 16”x48”
angolo SX angolo DX
sandstorm
thunderstruck
round lineare 40x122,6 cm 16”x48”
sandstorm
thunderstruck
angolare elemento “L” 40x122,6x5 cm 16”x48” x2”
sandstorm
thunderstruck
elemento “L” 40x122,6x5 cm 16”x48” x2”
sandstorm
thunderstruck
griglia 20x61 cm 8”x24” R
sandstorm
thunderstruck
griglia angolo 20x61 cm 8”x24” R
angolo SX angolo DX
R
sandstorm
thunderstruck
angolo bordo toro 40x122,6 cm 16”x48”
sandstorm
thunderstruck
R361,12/PZ 441,36/coppia
361,12/PZ682,10/coppia317,91/PZ
441,36/PZ 200,62/PZ
angolo SX angolo DX
-38- -39-
Simbologia caratteristiche tecniche - grès porcellanato . Symboles technical characteristics - porcelain stoneware Symboles des caracteristiques techniques - grès cérame . Symbole technischen eigenschaften - feinsteinzeug
CARATTERISTICHE TECNICHETECHNICAL CHARACTERISTICSCARACTÉRISTIQUES TECHNIQUESTECHNISCHE MERKMALE
NORMA DI RIFERIMENTOREFERENCE STANDARDNORME DE REFERENCEPRÜFMETHODE
VALORE RICHIESTOREQUIRED VALUEVALEUR REQUISESOLLWERT
VALORE MEDIO TUSCANIAAV. TUSCANIA VALUEVALEUR MOYENNE TUSCANIAMITTLERER TUSCANIA-WERT
DIMENSIONIDIMENSIONSDIMENSIONSABMESSUNGEN
ISO 10545-2
CONFORMECOMPLIANTCONFORMEKONFORM
CONFORMECOMPLIANTCONFORMEKONFORM
ASSORBIMENTO D’ACQUAWATER ABSORPTIONABSORPTION D’EAUWASSERAUFNAHME
ISO 10545-3 ≤ 0,5 %
CONFORMECOMPLIANTCONFORMEKONFORM
RESISTENZA A FLESSIONEMODULUS OF RUPTURERESISTANCE A LA FLEXIONBIEGEFESTIGKEIT
ISO 10545-4
MODULUS OF ROPTURER ≥35 N/MM2
BREAKING STRENGTH S ≥1300 N
CONFORMECOMPLIANTCONFORMEKONFORM
RESISTENZA ALL’ABRASIONEABRASION RESISTANCERÉSISTANCE À L’ABRASIONABRIEBBESTÄNDIGKEIT
ISO 10545-7PEISOLO PER PIASTRELLE SMALTATE ONLY FOR GLAZED TILES
DILATAZIONE TERMICA LINEARELINEAR THERMAL EXPANSIONDILATATION THERMIQUE LINEAIRELINEARE WÄRMEAUSDEHNUNG
ISO 10545-8 =< 9x10-5 YC-1
CONFORMECOMPLIANTCONFORMEKONFORM
RESISTENZA AGLI SBALZI TERMICITHERMAL SHOCK RESISTANCERESISTANCE AUX ECARTS DE TEMPERATUREITEMPERATURWECHSELBESTÄNDIGKEIT
ISO 10545-9
RESISTENTERESISTANTRESISTANTBESTÄNDING
RESISTENTERESISTANTRESISTANTBESTÄNDING
RESISTENZA AL GELOFROST RESISTANCERESISTANCE AU GELFROSTBESTÄNDIGKEIT
ISO 10545-12
RESISTENTERESISTANTRESISTANTBESTÄNDING
RESISTENTERESISTANTRESISTANTBESTÄNDING
RESISTENZA AGLI ACIDI ED ALLE BASIACID AND ALKALI RESISTANCERESISTANCE AUX ACIDES ET AUX BASESSÄURE- UND LAUGENBESTÄNDIGKEIT
ISO 10545-13 CLASS GB MIN.LOW CONCENTRATION GLAHIGH CONCENTRATION GHA
RESISTENZA ALL’ATTACCO CHIMICOCHEMICAL RESISTANCERESISTANCE À L’ATTAQUE CHEMIQUECHEMISCHE BESTÄNDIGKEIT
ISO 10545-13 CLASS GB MIN. GA
RESISTENZA ALLE MACCHIESTAIN RESISTANCERESISTANCE AU TACHESFLECKENBESTÄNDIGKEIT
ISO 10545-14 CLASS 3 MIN. 5
COEFFICIENTE DI ATTRITO (SCIVOLOSITÀ)FRICTION COEFFICIENT (SLIPPERINESS)COEFFICIENT DE FRICTION (GLISSEMENT)REIBUNGSKOEFFIZIENT (RUTSCHIGKEIT)
BCR - ITALIADM DEL 14-06-89
ASTM - USAASTM C1028
DIN - GERMANIADIN 51130
DRY RUBBER0,62
WET RUBBER0,51
DRY LEATHER0,62
DRY NEOLYTHE0,69
WET NEOLYTHE0,62
R11
THE PRODUCTS HAVING AN ABSORPTION < 0,5% ARE CLASSIFIED ACCORDING THE UNI CEN STANDARDS “FULLY VITRIFIED TILES” AND ACCORDING TO THE ASTM STANDARDS “IMPERVIOUS TILES”
TECHNICAL PROJECT
RACCOMANDAZIONI SULLA POSA, PULIZIA E MANUTENZIONE FP2Per la posa dei materiali FP2 rettificati mantenere una fuga minima di 3 mm. Da una piastrella all’altra usufruendo di stucchi e sigillanti di colore coordinato a quello del materiale. Nella posa dei materiali retti cati rettangolari, è importante evitare di far collimare i vertici di una piastrella con la metà delle altre, al ne di sopperire alle eventuali imperfezioni di planarità presenti comunque in tutti i grandi formati. Trattandosi di materiale tagliato e rettificato, per evitare questo problema, è consigliabile posare il materiale a correre, con intervallo da 0 a 15 cm. E’ fortemente auspicabile af dare la posa a personale esperto che, dopo aver veri cato la corretta planarità della caldana e la qualità del materiale, contribuirà alla impeccabile esecuzione dell’incarico.
Tuscania consiglia di effettuare le operazioni di pulizia ordinaria delle superfici pavimentate con FP2 ricorrendo a acqua e normali detergenti neutri: la pendenza della superficie e gli spazi tra le lastre nelle pose a secco facilitano il naturale deflusso delle acque.Si consideri tuttavia che qualunque tipo di pavimentazione è soggetta al fenomeno della tensione superficiale dei liquidi: si tratta della stessa proprietà dell’acqua che le conferisce la tendenza a distribuirsi in gocce sferiche, o che causa la formazione della classica bombatura in un bicchiere pieno di acqua oltre il colmo.La tensione superficiale può impedire un completo scolo dell’acqua, e causare lo stazionamento temporaneo di una patina di liquido in corrispondenza dei bordi delle lastre. Per ovviare a questo problema, Tuscania raccomanda di prevedere le opportune pendenze della superficie in fase di installazione, per facilitare il deflusso delle acque negli spazi tra le lastre. Se dovesse persistere una patina di acqua, si consiglia di spingerla verso le fughe con uno spazzolone, oppure di rimuoverla con un aspira liquidi.
PORCELAIN TILES IN 20MM THICKNESS (FP2) FOR OUTDOOR FLOORS RECOMMENDATIONS FOR THE INSTALLATION, CLEANING AND MAINTENANCEFor the installation of FP2 rectified materials maintain a gap between the tiles of at least 3 mm. Using grouts and sealers that are colour co-ordinated with the material. When laying rectangular recti ed material, it is important to avoid placing the edges of each tile next to the halves of others in order to compensate for any imperfections in atness that are, however, always present in large sizes. As this is cut and recti ed material to avoid the problem it is recommended to lay the material in a straightforward design with an interval from 0 to 15 cm. Between each tile as per the pattern shown below. It is highly suggested to have the installation done by quali ed experts who, after checking the proper atness of the concrete slab and the quality of the material, will contribute to carrying out of the job awlessly.
Tuscania recommends carrying out the procedures for the ordinary cleaning of FP2 floor surfaces using water and commercially available neutral detergents: the inclination of the surface and the space between adjacent slabs for dry-system installation favour the natural flow of water.However, it is important to take into consideration that any type of floor surface is subject to the surface tension effect of liquids: it is the same property of water that gives the tendency to transform into spherical droplets and which cause the curved top surface of a glass full of water.The surface tension can obstacle the complete drainage of water and cause a temporary stagnation of liquid on the slab edges. In order to avoid this problem, Tuscania recommends ensuring adequate inclination of the surface during installation so as to encourage the flow of water between adjacent slabs. Should liquid deposit on the surface, it is recommended to push it towards grout lines using a brush or remove it with a wet and dry vacuum cleaner.
GRÈS CÉRAME EN 20 MM (FP2) D’ÉPAISSEUR POUR DES SOLS EXTÉRIEURS CONSEILS SUR LA POSE, NETTOYAGE ET ENTRETIENPour poser les matériaux FP2 rectifiés, garder un joint minimum de 3 mm entre deux carreaux, en appliquant des produits de remplissage des joints et des produits de scellement d’une teinte assortie à celle du matériau. Au cours de la pose des materielle recti és rectangulaires, il est important d’éviter de faire coïncider les angles d’un carreau avec la moitié des autres, a n de faire face aux éventuelles imperfections de planéité qui, d’une manière ou d’une autre existent toujours dans les grands formats. Étant donné qu’il s’agit de materielle coupé et recti é, pour éviter ce problème, il est préconisé de poser le matériau en alignement continu, avec un intervalle de 0 à 15 cm. Il est vivement recommandé de con er la pose aux soins d’un carreleur compétent qui, après avoir véri é si la planéité de la sous-couche isolante est correcte et jugé de la qualité du materielle, contribuera, par son expérience, à une exécution impeccable.
Tuscania conseille d’effectuer les opérations de nettoyage ordinaire des surfaces carrelées avec FP2 en utilisant de l’eau et des détergents neutres communs: l’inclinaison de la surface et les espaces entre les dalles dans les poses à sec facilitent l’écoulement naturel de l’eau.Considérez cependant que tout type de sol est soumis au phénomène de la tension superficielle des liquides: il s’agit de la même propriété de l’eau qui lui donne la tendance à se répandre en gouttes sphériques, ou qui entraîne la formation classique de la surface bombée d’un verre d’eau rempli à ras bord.La tension superficielle peut empêcher l’écoulement de l’eau, et causer la stagnation temporaire d’une légère patine d’eau au niveau des bords des dalles. Pour résoudre ce problème, Tuscania conseille de prévoir les pentes opportunes de la surface en phase d’installation, pour faciliter l’écoulement des eaux dans les espaces entre les dalles. Si la patine d’eau persiste, il est conseillé de la pousser vers les joints à l’aide d’une brosse à carrelage ou bien de l’éliminer avec un aspirateur à liquide
20 MM (FP2) STARKES FEINSTEINZEUG FÜR AUSSENBODENBELÄG EMPFEHLUNGEN FÜR DIE VERLEGUNG, REINIGUNG UND PFLEGEBei der Verlegung von FP2 geschliffenen Fliesen, eine Fuge von mindestens 3 mm vorzusehen und Fugen- und Dichtmassen mit einer solchen Färbung zu verwenden, die zu den Farbtönen der Fliesen passt. Bei der Verlegung von rechteckig geschliffenen Fliesen ist infolge der auf sämtlichen großen Formaten vorhandenen Ebenheitsfehler darauf zu achten, dass die oberen Ränder einer Fliese nicht mit der Mitte der anderen Fliesen zusammentreffen. Da es sich um geschnittenes und geschliffenes Material handelt, kann dieses Problem dadurch gelöst werden, dass man die Fliesen fortlaufend, mit einem Zwischenraum von 0 bis 15 cm verlegt. Es ist absolut empfehlenswert, dass die Verlegung von Fachpersonal mit der nötigen Erfahrung ausgeführt wird, das nach der Überprüfung des Estrichs auf einwandfreie Ebenheit und der Qualität des Materials die ihm anvertraute Arbeit anstandslos ausführen wird.
Tuscania empfiehlt, zur normalen Reinigung der mit FP2 verlegten Flächen Wasser und normale, neutrale Reinigungsmittel zu verwenden; das Gefälle der Flächen und die im Trockenbau entstehenden Zwischenräume zwischen den Platten erleichtern das natürliche Abfließen des Wassers. Auf jeder Art von Bodenbelag kommt es jedoch zur Oberflächenspannung der Flüssigkeiten: es handelt sich um ein Merkmal des Wassers selbst, das sich in runden Tropfen verteilt bzw. die klassische Wölbung in einem randvoll gefüllten Glas aufweist. Die Oberflächenspannung kann das vollständige Ablaufen des Wassers behindern und dazu führen, dass sich vorübergehend Flüssigkeit an den Plattenrändern ansammelt.Um dieses Problem zu vermeiden, empfiehlt Tuscania, bei der Installation für eine angemessene Neigung der Fläche zu sorgen, damit das Wasser über die Zwischenräume ablaufen kann. Auf der Oberfläche stagnierendes Wasser sollte mit einer Bürste in die Zwischenräume gedrückt oder mit einem Allessauger abgesaugt werden.
AVVERTENZA PER I SIGNORI POSATORIControllare attentamente il materiale prima della posa, particolarmente tono, calibro e scelta. Non si accettano reclami sul materiale posato.NOTICE TO TILE FIXERSGoods should be carefully checked before fixing, especially tonality, caliber and choice. Claims cannot be accepted once the goods are laid.AVIS AUX CARRELEURSContrôler attentivement les carreaux avant la pose particulierement tonalité, calibre choix. Aucune réclamation ne sera acceptée une foi que le matériel est posé.HINWEIS FUER DIE VERLEGUNGDas material ist vor de Verlegung genau zu ueberpruefen besonders Tonalität, Kaliber und Sorte. Reklamationen nach der Verlegung werden nicth akzeptiert
Si consiglia la posa a colla – The use of tile adhesive is recommended - Pose a la colle conseillee - Es wird die verlegung im klebebett empfohlen Doradza sie montaz na klej.
-40- -41-
Le informazioni contenute nel presente catalogo sono il più possibile esatte, ma non sono da ritenersi vincolanti.
Per esigenze di produzione l’Azienda si riserva il diritto di apportare eventuali modifiche che si rendessero necessarie.
Peso, colori e misure sono soggetti alle inevitabili variazioni tipiche del processo di cottura della ceramica.
II colori e gli effetti riportati sul presente catalogo sono indicativi per i limiti consentiti dalla stampa;
per questo non possono essere vincolanti e costituire base per eventuali contestazioni.
The information contained in this catalogue is as accurate as possible, but cannot be considered as legally binding.
The Company reserves the right to make any modifications that become necessary due to production requirements.
Weight, colours and dimensions are subject to the inevitable variations typical of the ceramic firing process.
Colours and aesthetic effects shown on this catalogue should be considered indicative and approximate
as a resul of printing process limits. Possible variations may occur and
can not be at the base of any claim.
Les informations reprises dans ce catalogue sont exactes, mais elles n’engagent aucunement notre
Société du point de vue lé gal. Pour des exigenses de production la Société se rèserves
le droit d’opporter toutes les dimensions sont assujeltis aux variations typiques du processus
de cuisson de la céramiques. Les couleurs et les effets présentés dans ce catalogue
sont indicatifs dans la mesure permise par la presse, ce qui explique pourquoi ils ne peuvent pas être obligatoire et
constituer la base d’un éventuel désaccord.
Die informationen des vorliegenden Katalogs sind so exakt wie möglich, sind jedoch nicht als
gesetzlich verbindlich zu betrachten.Aus Fertigungsgründen behält die Firma sich das Recht vor,
eventuell notwendige Anderungen vorzunehmen. Gewicht, Farben und Abmessungen unterliegen den
unvermeidlichen Veränderungen, die für den Brennvorgang von Keramikproduckten typisch sind.
Die in diesem Katalog gezeigten Farben und Effekte sind Richtwerte, soweit durch die Presse, die ist, warum
sie nicht bindend und stellen die Grundlage für eine Meinungsverschiedenheit gestattet.
Marketing:Tuscania
Credit:
stampa:
finito di stampare: Gennaio 2019
FP2
Tabella pesi ed imballi - Sizes weight and packaging Mesures poids et emballages - Tabelle der Gewichte und Verpackungen
formati - sizes - tailles - formate pz. x box
mq. x box
kg. x box
box x pal.
mq. x pal.
kg. x pal.
90x90 cm 36”x36” FP2 (rettificato) NEW 20 mm 1 0,81 35,10 20 16,20 722 94x107x64
61,0x61,0 cm 24”x24” FP2 (rettificato) 20 mm 2 0,74 32,50 30 22,20 985 80x120x75
45x90 cm 18”x36” FP2 (rettificato) 20 mm 2 0,81 36,50 27 21,87 995 100x120x55
40x122,6 cm 36”x48” FP2 (rettificato) NEW 20 mm
Note - Notes - Notes - Anmerkungen
I pezzi speciali FP2 vengono venduti al pezzo e solo su ordinazione (tempo minimo di consegna 20 gg lavorativi dall’ordine)The special pieces FP2 are sold by piece and only on request (minimum delivery time 20 working days from date of order).Les pièces spèciales FP2 sont vendus à la pièce et uniquement sur commande (délai minimum de livraison 20 jours ouvrés à partir de la commande).Spezial Teile FP2 sind pro Stuck verkauft und nur auf Bestellungen produziert. (Lieferzeiten midesten 20 arbeitstage ab Auftragbestätigung)
-42-
01/1
9
Tuscania S.p.A.Via Giardini Sud, 4603
41028 Serramazzoni (Mo) - ItaliaTel. +39 0536.952399Fax +39 0536.954716
FP2