3.CSWIP-3.1-brouchure

8/19/2019 3.CSWIP-3.1-brouchure

1/4

CSWIP-3.1 WELDING INSPECOR COURSE

We Train Our Students With The Same Care s We Hire Them Ourselves

WELDING INSPECTOR TRAINING PROGRAMME

CSWIP-3.1 Training & Certification Programme


2/4



INTRODUCTION

Zenith Inspection Services & Quality training centre (ZIS) has entered into an agreementwith UK firm to conduct technical training programs in India as per the CSWIP and

BGAS/CSWIP schemes in the field of welding, inspection, NDT, painting to meet therequirement of the industry.

COURSE OBJECTIVES

To understand factors which influence the quality of fusion welds in steels To recognise characteristics of commonly used welding processes in relation to

quality control

To interpret drawing instructions and symbols to ensure that specifications are met To set up and report on inspection of welds, macro sections and other mechanical

tests

To assess and report on welds to acceptance levels To confirm that incoming material meets stipulated requirements and recognise the

effects on weld quality of departure from specification

To be in a position to pass the Welding Inspector - Level 2 examinations

PARTICIPANTS

Suitable for professionals in welding industry willing to upgrade skill sets to InternationalIndustry Standards and get the globally accepted certification. Persons who have minimumof 3 years’ experience in the field of welding inspection or 5 years as welding Supervisor areeligible to attend CSWIP 3.1 Welding Inspector course and exam as per the details are givenin d ocument CSWIP WI‐6‐92 edition.

COURSE CONTENTS

The duties and responsibilities of a welding inspector; fusion welding processes; typical welddefects; types of steel; carbon-manganese, low alloy and stainless steels; hardening ofsteels; weldability; heat treatment; parent metal defects; visual inspection; testing parentmetals and welds; destructive tests; NDT techniques; welder and procedure approval; codesand standards; outline of safe working practices; practice in examination questions;continuous and end-of-course assessment.


3/4



ENTRY REQUIREMENTS

Welding Inspector for a minimum of 3 years with experience related to the dutiesand responsibilities listed in Clause 1.2.2 of CSWIP document WI-6-92, under

qualified supervision, independently verified OR Certified Visual Welding Inspector (Level 1) for a minimum of 2 years with job

responsibilities in the areas listed in 1.2.1 and 1.2.2 of CSWIP document WI-6-92 OR

Welding Instructor or Welding Foreman/Supervisor for a minimum of 5 year

PREPARATORY COURSE TRAINING

Zenith Inspection Services & Quality training centre (ZIS) is organizing andconducting Welding Inspector examination preparatory courses at Goa ,Mumbai,Ahmedabad-India and other training centres. Training consists of theory, practical sessions,effective power point and video presentations, quiz and discussions on the topics. Mock upexaminations are also conducted to assess the knowledge gained and to improve theconfidence level. These mock up tests will quickly bring the participant to know his strengthsand weaknesses in specific topics so that more emphasis can be put on key topics to meetthe target.

EXAMINATION PATTERN

Theory Part A2: General Welding Theory, Product Technology and NDT 30 multiplechoice questions ‐‐ 45 minutes. Theory Part B2: Specific Welding Techno logy. 60multiple choice questions. Time allowed 1hr 30 minutes.

Practical Part A2: Inspection of a plate butt weld to a code provided by the TestCentre. Time allowed 1hr 15 minutes

Practical Part B2: Inspection of a pipe butt weld to a code provided by the TestCentre. Time allowed 1hr 45 minutes

Practical Part C2: Inspection of a set of 2 Nos. macro test samples to a code providedby the Test Centre. 45 minutes

TRAINING VENUES

NAVI MUMBAI GOA AHMEDABAD We can provide our training programmes at your facilities


4/4

Documents

3.CSWIP-3.1-brouchure