Embed Size (px)
Citation preview
Course syllabus
โปรแกรมการฝึกอบรม Training Program
AUTOMOTIVE MODULE
Course syllabus: A601
This course is designed to provide knowledge for personnel involved in the organization’s QMS with the necessary knowledge to support their organization in achieving compli-ance to ISO 9001:2015 and IATF 16949:2016. This training focuses on an in-depth review of the changes from ISO/TS 16949:2009 to ISO 9001:2015 and IATF 16949:2016, changes from Rules 4th to Rules 5th, automotive auditing approaches, and transition planning.
The International Automotive Task Force (IATF) has replaced ISO/TS 16949:2009 with IATF 16949:2016 – a new internation-al standard that outlines the quality management system re-quirements for organizations involved in production, services or accessories for the automotive industry. As a result, ISO/TS 16949:2009 certificates will not be valid after September 14, 2018.
Objective
To provide knowledge about the QMS in automotive indus-try
To improve quality and efficiency by reducing and manag-ing QMS within your organizations
To apply specific clauses, relate the clauses to the intent of the standard and how it is linked by the process ap-proach
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations QMS model and concept Automotive Process Approach Organization and it’s Context Needs and Expectations of Interested Parties Policy setting and deployment Role and responsibility Requirements of ISO 9001:2015 and IATF 16949:2016
in brief Core Tools (APQP, FMEA, PPAP, SPC, MSA) Over-
view Guidance on the implementation of changes Conclusion
IATF 16949: 2016 บริหารคณุภาพอตุสาหกรรมยานยนต ์IATF 16949: 2016 QMS for automotive industry
Module: executive
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in each functions which group below;
Directors
Managers
supervisors
Quality management representative
Certificate The training e-certificate will be provided for at-tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about QMS requirement in au-tomotive
an increased competence that contributes to the understanding of IATF 16949: 2016.
Be able to implement the standard within the or-ganization
Course syllabus: A602
This course is designed to provide knowledge for personnel involved in the organization’s QMS with the necessary knowledge to support their organization in achieving compli-ance to ISO 9001:2015 and IATF 16949:2016. This training focuses on an in-depth review of the changes from ISO/TS 16949:2009 to ISO 9001:2015 and IATF 16949:2016, changes from Rules 4th to Rules 5th, automotive auditing approaches, and transition planning.
The International Automotive Task Force (IATF) has replaced ISO/TS 16949:2009 with IATF 16949:2016 – a new internation-al standard that outlines the quality management system re-quirements for organizations involved in production, services or accessories for the automotive industry. As a result, ISO/TS 16949:2009 certificates will not be valid after September 14, 2018.
Objective
To provide knowledge about the QMS in automotive indus-try
To improve quality and efficiency by reducing and manag-ing QMS within your organizations
To apply specific clauses, relate the clauses to the intent of the standard and how it is linked by the process ap-proach
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations QMS model and concept Automotive Process Approach Organization and it’s Context Needs and Expectations of Interested Parties Requirements of ISO 9001:2015 and IATF 16949:2016 Core Tools (APQP, FMEA, PPAP, SPC, MSA) Over-
view Guidance on the implementation of changes Conclusion
IATF 16949: 2016 บริหารคณุภาพอตุสาหกรรมยานยนต ์IATF 16949: 2016 QMS for automotive industry
Module: introduction
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in each functions which group below;
Managers, supervisors, line leaders;
Technical support personnel such as, planners, engi-neers, technical record staff;
Quality control/assurance staff;
Administrative staff;
Any staff;
Certificate The training e-certificate will be provided for at-tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about QMS requirement in au-tomotive
an increased competence that contributes to the understanding of IATF 16949: 2016.
Be able to implement the standard within the or-ganization
Course syllabus: A603
This course is designed to provide knowledge for personnel involved in the organization’s QMS with the necessary knowledge to support their organization in achieving compli-ance to ISO 9001:2015 and IATF 16949:2016. This training focuses on an in-depth review of the changes from ISO/TS 16949:2009 to ISO 9001:2015 and IATF 16949:2016, changes from Rules 4th to Rules 5th, automotive auditing approaches, and transition planning.
The International Automotive Task Force (IATF) has replaced ISO/TS 16949:2009 with IATF 16949:2016 – a new internation-al standard that outlines the quality management system re-quirements for organizations involved in production, services or accessories for the automotive industry. As a result, ISO/TS 16949:2009 certificates will not be valid after September 14, 2018.
Objective
To provide knowledge about the QMS in automotive indus-try
To improve quality and efficiency by reducing and manag-ing QMS within your organizations
To apply specific clauses, relate the clauses to the intent of the standard and how it is linked by the process ap-proach
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations QMS model and concept Automotive Process Approach Interpretation of requirements of ISO 9001:2015 and
IATF 16949:2016 Interpretation and workshop covered all clauses
Core Tools (APQP, FMEA, PPAP, SPC, MSA) Over-view
Guidance on the implementation of changes Setting of the implementation steps and structure
Conclusion
IATF 16949: 2016 บริหารคณุภาพอตุสาหกรรมยานยนต ์IATF 16949: 2016 QMS for automotive industry
Module: implementation
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in each functions which group below;
IATF implementation team
Managers, supervisors, line leaders;
Technical support personnel such as, planners, engi-neers, technical record staff;
Quality control/assurance staff;
Administrative staff;
Any staff;
Certificate The training e-certificate will be provided for at-tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about QMS requirement in au-tomotive
be able to support the QMS auditing
be able to implement the standard within the or-ganization
Course syllabus: A604
This course provides methods to document and implement a Quality Management System based on the IATF 16949 require-ments. The course is designed for those participants that are responsible in the design, implementation and maintenance of the Quality Management System. The course is designed to provide knowledge for personnel involved in the organization’s QMS with the necessary knowledge to support their organiza-tion in achieving compliance to ISO 9001:2015 and IATF 16949:2016. This training focuses on an in-depth review of the changes from ISO/TS 16949:2009 to ISO 9001:2015 and IATF 16949:2016, changes from Rules 4th to Rules 5th, automotive auditing approaches, and transition planning.
The International Automotive Task Force (IATF) has replaced ISO/TS 16949:2009 with IATF 16949:2016 – a new internation-al standard that outlines the quality management system re-quirements for organizations involved in production, services or accessories for the automotive industry. As a result, ISO/TS 16949:2009 certificates will not be valid after September 14, 2018.
Objective
To provide knowledge about the QMS in automotive indus-try
To improve quality and efficiency by reducing and manag-ing QMS within your organizations
To apply specific clauses, relate the clauses to the intent of the standard and how it is linked by the process ap-proach
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations QMS model and concept Automotive Process Approach Document control structure & system Introduction of requirements of ISO 9001:2015 and
IATF 16949:2016 documentation workshop
Guidance on the implementation of changes Setting of the implementation steps and structure
Conclusion
IATF 16949: 2016 บริหารคณุภาพอตุสาหกรรมยานยนต ์IATF 16949: 2016 QMS for automotive industry
Module: documentation
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in each functions which group below;
IATF implementation team
Managers, supervisors, line leaders;
Technical support personnel such as, planners, engi-neers, technical record staff;
Quality control/assurance staff;
Administrative staff;
Any staff;
Certificate The training e-certificate will be provided for at-tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about QMS requirement in au-tomotive
be able to support the QMS auditing
be able to implement the standard within the or-ganization
Course syllabus: A605
This course is designed to provide knowledge for personnel involved in the organization’s QMS with the necessary knowledge to support their organization in achieving compli-ance to ISO 9001:2015 and IATF 16949:2016. This training focuses on an in-depth review of the changes from ISO/TS 16949:2009 to ISO 9001:2015 and IATF 16949:2016, changes from Rules 4th to Rules 5th, automotive auditing approaches, and transition planning.
The International Automotive Task Force (IATF) has replaced ISO/TS 16949:2009 with IATF 16949:2016 – a new internation-al standard that outlines the quality management system re-quirements for organizations involved in production, services or accessories for the automotive industry. As a result, ISO/TS 16949:2009 certificates will not be valid after September 14, 2018.
Objective
To provide knowledge about the QMS in automotive indus-try
To improve quality and efficiency by reducing and manag-ing QMS within your organizations
To apply specific clauses, relate the clauses to the intent of the standard and how it is linked by the process ap-proach
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations QMS model and concept QMS importance Automotive Process Approach Brief requirements of ISO 9001:2015 and IATF
16949:2016 Core Tools (APQP, FMEA, PPAP, SPC, MSA) Over-
view Guidance on the implementation of changes Conclusion
IATF 16949: 2016 บริหารคณุภาพอตุสาหกรรมยานยนต ์IATF 16949: 2016 QMS for automotive industry
Module: awareness
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in each functions which group below;
Managers, supervisors, line leaders;
Technical support personnel such as, planners, engi-neers, technical record staff;
Quality control/assurance staff;
Administrative staff;
Any staff;
Certificate The training e-certificate will be provided for at-tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about QMS requirement in au-tomotive
an increased competence that contributes to the understanding of IATF 16949: 2016.
Be able to implement the standard within the or-ganization
Course syllabus: A606
This course provides participants with a working knowledge of FMEA, APQP and PPAP through discussions, presentations and hands-on exercises. It also includes an introduction to SPC and MSA and how to use them as a tool for your QMS.
The International Automotive Task Force (IATF) has replaced ISO/TS 16949:2009 with IATF 16949:2016 – a new internation-al standard that outlines the quality management system re-quirements for organizations involved in production, services or accessories for the automotive industry. As a result, ISO/TS 16949:2009 certificates will not be valid after September 14, 2018. IATF requires that "personnel performing work affecting conformity to product requirements shall be competent on the basis of appropriate education, training, skills and experience."
Objective
To develop the understanding and skills necessary to measure and monitor manufacturing processes and correct problems when they arise
To provide a basic understanding of the core tools used in New Product Development for effective auditing pro-grams
To apply the use of Process Management to achieve standardization and improvement
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations Core Tool overview
APQP - Advanced Product Quality Planning PPAP - Production Part Approval Process FMEA - Failure Mode and Effects Analysis SPC - Statistical Process Control MSA - Measurement Systems Analysis
Workshop Conclusion
เคร่ืองมือบริหารคณุภาพอตุสาหกรรมยานยนต ์Core Tools for automotive industry
Module: introduction
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in industry which group below;
Supervisor
Engineer
Officer
Staff who have direct responsibility for defining and developing an organization’s core tools.
Certificate The training e-certificate will be provided for at-
tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about QMS requirement in au-tomotive
Be able to implement the standard within the or-ganization
Course syllabus: A607
This course is designed to provide knowledge for participants with an understanding of topics of statistical process control through presentations, illustrations and examples of the analy-sis of data.
SPC is applied using the parts produced in a factory. Partici-pants run a group of sequentially produced parts and then measure them to determine average, range and sigma. Control limits are calculated using these same parts and additional samples are measured and plotted to determine where the pro-cess is going and why. Interpretations of results are part of this course, as well as, capability study exercises..
Objective
To develop the understanding and skills necessary to measure and monitor manufacturing processes and correct problems when they arise
To provide a basic understanding of the core tools used in New Product Development for effective auditing pro-grams
To apply the use of Process Management to achieve standardization and improvement
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations SPC Background Normal Theory and the Central Limit Introduction to Control Charts Variable Control Charts Attribute Control Charts Analyzing Control Charts Capability Analysis Other Types of Control Charts Process Improvement Cycle & Process Control Workshop and exercise will be provided in each ses-
sions Conclusion
เคร่ืองมือทางสถิติเพ่ือการควบคมุกระบวนการ Statistical Process Control (SPC)
Module: introduction
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in aviation which group below;
Supervisor
Engineer
Officer
Staff who have direct responsibility for defining and developing an organization’s measuring, monitoring and analytical practices using data collection, charts and statistical tools appropriate for its products, pro-cesses and business goals and objectives.
Certificate The training e-certificate will be provided for at-
tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about QMS requirement in au-tomotive
Be able to implement the standard within the or-ganization
Course syllabus: A608
This course is designed to provide knowledge for participants with an understanding of topics of 8D-disciplines through presentations, illustrations and examples of the analysis of da-ta.
8D problem solving training course follows the steps of 8D in a dynamic, instructor-led environment. The course describes to participants the methodologies that have proven to be best practices for effective 8D development. Each participant will be able to interact with all of the elements of the 8D process, in-cluding the use of tools .
Objective
To develop the understanding and skills necessary to im-plement 8D for customer complaint response
To provide a basic understanding of the problem solving technique
To apply the use of 8D format standard and evaluate re-sults
To determine potential strategies and actions to ensure effective implementation
Content
The syllabus covers the following topics
Introduction Terms & abbreviations Problem solving awareness 8D
D1: Form Team D2: Describe the Problem D3: Contain Symptoms: Implement and Verify Inter-
im Actions
D4: Find and Verify Root Causes
D5: Select Permanent Corrective Actions
Decision Making
D6: Implement Permanent Corrective Actions
D7: Prevent System Problems
D8: Closure and Team Congratulation Workshop and exercise will be provided in each ses-
sions Conclusion
เครื่องมือการแก้ปัญหาด้วย 8D 8 Disciplines (8D) problem solving technique
Module: introduction
Period 1 days/ class
Language Thai (English/Japanese is as req.)
Cost depend on the number of participant (as define on the submitted quote)
Methods Presentation, group discussion, role play and case studies
Material Training handbook and course materials will be provided.
Target All personnel involved in each functions which group below;
Supervisor
Engineer
Officer
Staff who have direct responsibility for defining and developing an organization’s problem solving, custom-er complaint handling to ensure customer satisfaction.
Certificate The training e-certificate will be provided for at-
tendant who attend the whole course content. The par-ticipant who require hard copy is need to pay extra at 100 THB per page.
Benefits After having attended this course you and your
organisation will benefit by;
be knowledgeable about problem solving tech-nique: 8D in automotive
Be able to implement the 8D concept within the organization
Contact us
Quality Associates Ltd.
t: +66(0)889050555/911306300
f: +66(0)25405586,38111909
Line id: isoconsult
