ASHISH SHARMAPhone No.: +918875028511, +919351228593, +919813998992

E-Mail: ashish_sharma_12june@yahoo.co.in

Seeking Senior Level Assignments in Project Management / Instrumentation & Automation / Operations & Maintenance with a high growth oriented organisation in the Engineering & Power Sector.

Executive Summary

A dynamic professional with nearly 9.9 years of rich experience in Project management, Instrumentation, Operations & Maintenance and Installation & Commissioning.

Presently working with JSW ENERGY LTD (8*135MW Thermal Power Plant), Barmer as Jr. Manager (C&I O&M). Proficiency in managing the instrumentation, erection, testing, commissioning & maintenance of a wide range of plant

machinery and plant equipments. A strategic planner with experience in conducting & coordinating project activities, estimation & costing, resource

management with a flair for adopting modern methodologies in compliance to quality standards. Proficient in managing & leading teams for running successful process operations & experience of developing procedures,

service standards for operational excellence. Communicating with Clients, Consultant, Vendors & Licensor for the executing of Lum Sum Turn Key project. Possesses in- depth knowledge of Siemens DCS (Distributed Control System) Teleperm Xpadds & SPPA-T1000, SIEMENS

PLC S7, SCHNEIDER MODICON PLC, Bently Neveda 3500, GE Fanuc Rx3i & 90-70 Triple redundant PLC & Field Instrumentation in power plants.

Excellent analytical, troubleshooting, inter-personal and presentation skills with proven ability in driving numerous quality enhancement and process improvement initiatives across the career.

Areas of Expertise

Project Planning & Execution Handling project activities involving working out various requirements with respect to utilities, equipments, manpower &

monitoring overall project operations for ensuring timely completion. Conducting cost benefit analysis of the projects, assessment of the requirements, adaptation, interface, testing and

commissioning. Reviewing the engineering / design changes and resolving quality related problems associated with design. Developing the conceptual design of new panel entailing drawings & specification study & finalization, schedule for

development and final approval.

Operations & Maintenance Planning and effectuating predictive & preventive maintenance schedules for equipments; conducting periodic checks to

ensure performance of various equipments. Preparing the shift report, machine status report and manpower utilization during shift and pending jobs; identifying

areas of defects; conducting service/repair to rectify equipments. Preparation of SOPs. Working with Oracle based system named EAM (Enterprise Resources Planning) for Indent Making, raising Defects, Work

Orders, and Work Permits. Ensuring formulation of plans for breakdowns, and taking suitable action for resolving all major breakdowns in the

manufacturing plant and keeping major breakdown reports and steps for critical problem solving to avoid delay in repetitive breakdown.

Vendor Development Identifying and developing vendors for the procurement of necessary spares and consumables, to meet all maintenance

activities as per schedule. Negotiating with vendors for the procurement of supplies at reasonable rates. Assessing vendor performance at regular intervals on pre-determined parameters. Coordinating the renewal or

termination of contracts with vendors on the basis of their qualification on standards.

Quality Assurance/ MIS Ensuring strict compliance with quality guidelines specified by the organization, thereby achieving high product as well as

process quality standards. Devising and implementing new training methodologies to ensure high levels of productivity and less fatigue for the

people.

Maintaining and updating regular MIS reports for the purpose of reviews and utilization of information for further necessary action & reference.

Career HighlightsSince Jun’11- JSW ENERGY Ltd. (C&I OPERATION & MAINTENANCE) Barmer as Jr. Manager Role

Developing a calibration standard for Instrumentation department for the various parameters with traceability to standards.

Selecting control schemes, identifying the appropriate control system, enquiry specification preparation and selections of instruments based on type of application.

Handling Basic and Detailed engineering, system engineering, and preparation of logic diagram according to Function Description documents.

Managing installation, erection of equipments according to P&I flow diagram and commissioning of equipments / process instruments.

Having knowledge of Microsoft SQL Server, import & export database. Commissioning and maintenance of DEH (Digital Electro hydraulic) system. Commissioning of ETS (Emergency Trip System) GE Fanuc 90-70 Triple redundant PLC. Commissioning of TSI (Turbine Supervisory Instruments) for turbine governing system and TSI sensor installation Bently

Nevada 3500. Commissioning of HP/LP bypass system Hydraulic station of Siemens Simatic S7-300 PLC and Servo Control system. Calibration and Commissioning of Pneumatic Control Valves (Siemens, ABB, AEP, Fisher) Hydraulic Servo and Proportional

Valves, Motorized Valves and Motorized Control Dampers. Commissioning & Maintenance activities related to Boiler, Turbine and auxiliary equipments. Calibration of Field Instruments, Coal Feeder Yamato Siemens LOGO PLC and other critical instruments. Maintaining, modifying & developing logic programs & mimic screen; facilitating data transfer from different platforms

through DCS. Preparing Design documents required for implementing DCS’s and MES interface projects. Installation and calibration of Belt-Weigher with four load cells (IPA and Schenck made). Possesses depth knowledge of modbus protocol & Commissioning of modbus protocols with a wide range of plant

equipments. Preparation and handing over of As built documents & termination details. Managing the SIEMENS DCS – SPPA T1000 for BOP, SCHNEIDER MODICON PLC for Raw water pump house, GE FANUC

RX3i PLC for Ash handling & SIEMENS S7 PLC for Stacker Reclaimer for Lignite handling plant. Installation of DCS Panels, UPS & cable laying and Termination. Erection and Commissioning of Sertel make GPS clock systems, which include several slave clocks located at different locations

in plant and Time synchronization of various DCS and PLC systems. DCS logic implementation according to the requirement. Successfully commissioned the Cross Country pump house 4nos (196kms from plant) through BSNL lease line. Managing the installation, calibration, troubleshooting & preventive maintenance of the instruments like

o Flow Instrument: D/P Type, Magnetic.o Level Measurement: D/P type, Ultrasonic.o Temperature measurements RTD & Thermocouple.o Vibration sensors, Pressure transmitters, pressure switches & pressure gauges.o Coal feeders, Metal detector, belt weighers.

Accomplishments- Successfully managed the Maintenance & Commissioning of SIEMENS DCS SPPA-T1000, SIEMENS PLC S7, SCHNEIDER

MODICON PLC, GE FANUC RX3i PLC & UPS and Battery Bank. Successfully commissioned the Temperature Scanners Modbus RS-485 on Ethernet & Energy meters communication with

SCHNEIDER PLC & IO mapping done for the same of 4nos Cross Country pump house i.e. 196kms from plant. Successfully managed the Erection & Commissioning of DM Plant, ETP, Raw Water System, Cross Country pumping stations,

Electrical-BOP, Lignite Handling Plant & IDCT. Calibration of field instruments. Successfully managed erection & commissioning of Stacker Reclaimer project for Lignite Handling Plant with capacity of 0-

800TPH lignite. Successfully commissioned the Modbus RS-485 communication of Energy meters of HT & LT switchgears with DCS. Successfully commissioned the Modbus RS-485 communication of 400kV & 200kV APEX SECURE meters with Motorola PLC. Successfully commissioned the Advantech Modules Modbus RS-485 communication with Excitation Controller. Successfully commissioned the operation of Cross Country pump house through BSNL lease line communication with

SCHNEIDER PLC (i.e. 196kms from Plant). Properly managed the PM schedules with daily checklist of field instruments. Possesses experience in E-BOP commissioning & testing (E & I)

Complete IO assigning of Electrical BOP system (6.6 KV switchgear panels & 415 VAC LT panels) which includes finding out and listing out different type of inputs and outputs of different electrical systems, making proper cable schedule, SCADA and logic designing of the system according to requirement.

Apr’10 to May’11 INDRAJIT INFRASTRUCTURE PVT LTD. group of LLOYDS STEEL INDUSTRIES LTD. (E&I PROJECTS & MAINTENANCE) Wardha (Maharashtra) Role Implementation of PM Module in SAP. Preparation and handing over of as Built documents & termination details.

DCS logic implementation according to the requirement. Field instrumentation & Commissioning.Accomplishments Successfully managed the Commissioning & Maintenance of DCS Panels & SIEMENS DCS SPPA-T1000. Successfully managed the PM module in SAP & IT administration.

Aug’06 to Apr’10 ASM (Authorized system house for SIEMENS Ltd.), Gurgaon Role Complete erection & commissioning of the Thermal Power Plants including STG, Boiler, AHP, CHP, BOP and along with auxiliaries

which is being controlled & monitored using Distributed Control System (DCS) of M/s. Siemens. Prepared I/O list, Cable Schedule, Panel GA drawings & Electric Wiring Diagram, Termination Schedule, panel charging, Loop

checking, tuning of process parameters, commissioning activities pertaining to DCS system, reports CLCS & OLCS logic implementation of the system according to requirement. Field Instrumentation in Power Plants & Field Engineering, Commissioning, Troubleshooting, Maintenance and Services. Modbus communication with Serial Server. Commissioning of Sertel make GPS clock systems, which include several slave clocks located at different locations in plant and

Time synchronization of various DCS and PLC systems. Instruments Flow Transmitters, Level Transmitters, Pressure Switch, Level Switch, Vibration sensors, UPS system, Ultrasonic

transmitters, Magnetic transmitters and Calibration of Field Instruments. Commissioning of HT & LT motors, MCC’s, Project was a turnkey project where major responsibilities secluded were I/O list

preparation, cable schedule preparation, Panel GA drawings & electric wiring diagram preparation, termination schedule. Engineering and commissioning activities pertaining to DCS, reports preparation and handing over of As Built documents.

Erection of Controls valves, PT, FT, DPT, Open loop control system such as Drives including control & simulation checks. Pneumatic dampers, control valves & shut off valves testing and commissioning. Troubleshooting, loop checking & its connectivity with field instruments & MCC. Project Engineering Documentation.

Engineering & commissioning of Siemens DCS including design of cabinet system configuration, Cable Schedule. Preparing mandatory spare list, making as built of Instrument point database.

Testing of various Panels standard-verification. Panel dimensional test, Panel internal power-distribution testing, signals communication testing between FIM & TB, Earthing test for FIM, I/O Modules and 24VDC, I/O loop testing. 230VAC (UPS & non-UPS) power distribution.

Testing of various DCS parts like RX220 I/O modules, OFC-Communication, Network communication (HMI-to-HMI), Panels standard-verification.

Machine Preparation under different OS environments, i.e., Windows 9X, Windows 2K, Windows XP & Linux. Networking using TCP/IP protocol.

Knowledge of communication protocols Modbus, Ethernet TCP/IP, Profibus etc. Closed loop control system such as controllers including control & simulation checks. Open loop control system such as Drives including control & simulation checks. Including design engineering

mimics as per P &IDs. Functionality of each drive used in the projects. Commissioning of all I/O’s, logic generated signals and Graphic Designing and machine /controller loading

and control of all drives in auto and manual modes set point. All Commissioning activities related to Boiler, Turbine and auxiliary equipments. Synchronization of Sertel make GPS clock systems, which include several slave clocks located at different

locations in plant and Time synchronization of various DCS and PLC systems.Accomplishments

Successfully handled BTG & BOP Engineering, Commissioning, Troubleshooting & Maintenance of key projects like: 3x 210MW TS-2 R&M of Unit-1-3 Neyveli Lignite Corporation Ltd. (Coal based plant), Neyveli (Tamil Nadu). 500MW, ESSAR Bhander Combined Cycle Power Plant (Gas based plant), Surat (Gujarat). FAT & Commissioning of 130 MW of Steam Turbine & BOP (Balance of Plant) at 500MW, ESSAR Bhander

Combined Cycle Power Plant (Gas based plant), Surat (Gujarat) 2*500MW Unit#5 & 6 Chandrapur Super Thermal Power Station (Coal based plant), Chandrapur,

(Maharashtra). BHUSHAN ENERGY LTD (CPP – 2*150 MW Units) & 12 *20MW 3*210 GSECL THERMAL POWER STATION at Wanakbori (Gujarat). 8MW MEGHALAYA POWER LTD. 445MW Konaseema Combined Cycle Power Plant (Gas based plant), Devarapalli (Andhra Pradesh). 36MW Varrsana Ispat Ltd. (Coal based plant), Varrsana, Gandhidham (Gujarat). 60MW Station-A Unit-1 APGENCO (Coal based plant), Kothagudem (Andhra Pradesh). 6MW HINDALCO INDUSTRIES LTD. (ADITYA BIRLA GROUP, Coal based plant), Renukoot, (Uttar Pradesh). 4.5MW CHUNG HSIN ELECTRIC & MACHINERY 4.5MW HYDRO POWER STATION AT LINNEI &

MINGTAN POWER STATION AT MINGTAN IN TAIPEI (TAIWAN).

IT SkillsPackages : Microsoft Office. (Excel, Word, Access).Operating Systems : Win’98, 2000, 2003, XP, Vista, 7, 8.Software Language : Microsoft SQL Server, C, LINUX, ORACLE, SAP.

Academia

2003-2006 Diploma in Instrumentation & Control from SETH JAI PARKASH POLYTECHNIC, DAMLA (YAMUNANAGAR) affiliated to State Board of Technical Education (Chandigarh) 2012-2015 BS (Hons.) in Power Engineering from BITS PILANI with 7.8 CGPA

Personal InformationDate of Birth : 12th June 1986Passport No. : J0419857Father’s name : LATE SH. RAMMEHAR SHARMAMarital Status : MarriedAddress : H.NO.-196, Karan Vihar, Gali No.-4, Karnal-132001 (Haryana)Declaration

The particular cited above is true and correct to my best of knowledge and beliefs. If anything found wrong and unsatisfied to

my superiors then I will be responsible for the result consequences.

Date: 20th December 2015 Ashish SharmaPlace: Barmer (Rajasthan)