Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Operating Instructions
Card Sized Shaver
Model No.
ES518
Before operating this unit, please read these instructions completely.
ES518(アジア) 09.3.13 10:43 ページ 1
2
INDEX
ENGLISH Page 4
SpecificationsPower source: Two DC 3V LR-3 (AAA/UM-4)alkaline batteries (not included)Weight: 115g (including batteries)
ES518(アジア) 09.3.13 10:43 ページ 2
3
1 3
4
5
2
A
B
C
DE
F
G
ES518(アジア) 09.3.13 10:43 ページ 3
4
Before useThis unit will give you excellent service over a long period if youfollow a few simple suggestions.This booklet is designed to helpyou get the best possible usefrom this unit.
READ ALL INSTRUCTIONSBEFORE USE.
Parts identification(See Fig. 1)
A Protective capKeep it on the shaver whenthe shaver is not in use. Toremove it, put upward.
B Outer foilThis is a precision foil. Donot handle it roughly.Dropping the shaver canresult in damage to this deli-cate foil.
C Foil cassette release button
D Inner blade
E Inner blade mount
F SwitchSlide the switch upward toturn the shaver on.
G Bottom cover
Replacing batteries(See Fig.2)When the blade speeddecreases, this indicates that thebatteries should be replaced withnew ones. Do not use this shaver with weak batteries.
Turn the shaver so the bottom isfacing up and remove the bottom cover.Insert two LR-3 alkaline(AAA/UM-4) batteries observingthe Positive (+) and Negative (-)positions indicated beside thebattery compartment.
Attach the bottom cover.CDo not press the razor area
when attaching the cover.Do not combine an old batterywith a new one, or use differenttypes of batteries together.
CLR-3 alkaline (AAA/UM-4) bat-teries allow one month ofusage, assuming one two-minute shave each day.
CUse of batteries other than LR-3 alkaline (AAA/UM-4) batteries will reduce power and shortenshaver life.Remove the batteries when notusing the appliance for a longtime.
Using your shaverRemove the protective cap thenswitch the shaver on. Using lightpressure, move the shaver against the direction of beardgrowth.
ES518(アジア) 09.3.18 11:28 ページ 4
5
MaintenanceCleaningPush the foil cassette release but-ton and detach the foil frame asshown. (See Fig. 3)
Grasp inner blade firmly at eachside, and pull straight up. (See Fig. 4)
Clean away the clippings with thecleaning brush provided. (See Fig. 5)
Reassemble the shaver parts in the reverse order.
Replacing shavinghead componentsWith daily use, the outer foil mayneed to be replaced once every 12 months and the inner bladeevery 2 years.
Replacing the outer foil(WES9933) (See Fig. 3)Squeeze the foil cassette releasebuttons and lift the outer foil up-ward to remove it.
Insert the new outerfoil (See Fig. 3)Press down until the outer foilsnaps into place.
Replacing the innerblade (WES9932) (See
Fig. 4)Remove the inner blade by grasp-ing it firmly at both sides and pull-ing straight away from the shaver.
Inserting the new innerblade (See Fig. 4)Hold the inner blade at both sidesand guide it onto the inner blademount. Press it firmly into themount until it snaps in place.
CautionDo not wash with water.CIt may damage the shaver.
Do not leave the shaver wherethe temperature is below 0°C(32°F) or above 40°C (104°F),where it will be exposed to direct sunlight or a heat source,or where there is much mois-ture.Do not wipe the shaver bodyusing anything other than mildsoapy water.
CIt may alter the color of theshaver.
Do not use the shaver if it has adamaged foil and/or blade, as in-jury can result.Use this shaver for its intendeduse, as described in this manual.
ES518(アジア) 09.3.13 10:43 ページ 5
6
ES518(アジア) 09.3.13 10:43 ページ 6
7
ES518(アジア) 09.3.13 10:44 ページ 7
8
ES518(アジア) 09.3.13 10:44 ページ 8
9
ES518(アジア) 09.3.13 10:44 ページ 9
10
ES518(アジア) 09.3.13 10:44 ページ 10
11
ES518(アジア) 09.3.13 10:44 ページ 11
12
ES518(アジア) 2009.3.23 14:36 ページ 12
13
ES518(アジア) 09.3.13 10:44 ページ 13
14
ES518(アジア) 09.3.13 10:44 ページ 14
15
ES518(アジア) 09.3.13 10:44 ページ 15
Printed in JapanY. No.3 EN, KO, TW, AR, THAI ( 第三地域 )
Panasonic Electric Works Co., Ltd.http://panasonic.net
Panasonic Electric Works Co., Ltd.
ES518(アジア) 09.3.18 11:27 ページ 16