Charmec 6605 B 17008398

Charmec 6605 B TI 1700839DATE 13.06.2012PAGE 1 / 4

ANFO Loader with boom

Normet OyAhmolantie 6FI-74510 IISALMI, FINLANDTel +358 (0) 17 83 241Fax +358 (0) 17 823 [email protected] www.normet.fi



DIMENSIONS Length 9350 mmWidth 2150 mmHeight 2200 mmWheel base 3550 mmTrack 1500 mmGround clearance 280 mm

WEIGHTOperating 10000 kg

TURNING RADIUS Outer 6660 mmInner- left (shown on drawing) 3930 mm- right 3730 mm

NBB3S BASKET BOOMLifting capacity 500 kgLifting height 6500 mmBoom slew 20 / 30Vertical working reach 8750 mmHorizontal working reach 6950 mmHydraulic support legsDiesel start/stop from basketBattery operated emergency pump

ANFO SYSTEMTank volume 500 LPressure max. 7 barRemote controls in basket

PERFORMANCE CURVE 48000311st gear max. 5 km/h2nd gear 12 km/h3rd gear 25 km/hMax. tractive effort 90 kN

TRANSMISSIONDana powershift3 speeds forward and reverse4-wheel drive

AXLESPlanetary typerear axle fixedfront axle oscillation +/- 10o

TYRES10.00 - 20 PR 16

BRAKESService brake: hydraulically powered dual-circuit oil immersed multidisc brakes in both axlesSafety/Parking brake: hydraulically released fail-safe -type brake

STEERINGHydraulic frame steering,Orbitrol typeFrame articulation +/- 40o

HYDRAULICS210 bar, 95 L/min/2200 rpm

ENGINEDeutz TCD 2012 L496 kW/2200 rpm

ELECTRICAL SYSTEM24 V negative groundBattery 2 x 110 AhAlternator 80 ALights (2+2) x 70 W

DRIVER'S CABINOpen 2-man cabin FOPS/ROPS approved




LTC SERVICES

SPARE PARTSSpare parts package A: Available for 1000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. Spare parts package B: Available for 3000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. * Recommendations are based on average hours - can vary a lot depending on work site conditions. TRAINING SERVICESAvailable before delivery, at start up and after deliveryProduct training: Operation and MaintenanceNorSmartFoundation of electrics, hydraulics and mechanicsAuditProcess training:Concrete sprayingChargingProcess auditAUDIT SERVICESTo improve performance of the machinesTo improve the performance of your processesTo help improve the quality of maintenance operationsSERVICE CONTRACTSSpare parts supply programmesScheduled inspection programmesSupervision programmesPeriodic maintenance programmesMachine usage programmesLINK ONELink One electronic spare part manualsWARRANTY SERVICESExtended warranty

OPTIONAL EQUIPMENT:

360 L Anfo vessel720 L Anfo vesselAnfo hose 22/28mm - 30mAnfo hose 26,5/33,5mm - 30mAnfo hose 41,5/51 - 30mAnfo hose 19/25mm - 60mAnfo hose 22/28mm - 60mAnfo hose 26,5/33,5mm - 60mAnfo hose 41,5/51 - 60m

Enclosed cabin for NT60 (ROPS/FOPS)Mercedes-Benz OM 904 LA 90 kW engineXenon working lights on cabin (2 + 2 pcs)LED driving lights (4 + 2 pcs)LED working lights on cabin (2 + 2 pcs)

ADDITIONAL EQUIPMENT:

Electro hydraulic drive 15kW: 400 V / 50 Hz with 50 m cable and hydr. reel 440 V / 50 Hz with 50 m cable hydr. reel 690 V / 50 Hz with 50 m cable hydr. reel 1000 V / 50 Hz with 50 m cable hydr. reelCD/Radio systemCabin heatingAir conditioningSafety barSafety roof with hydraulic liftSafety roof with hydraulic lift and slideFogmaker extinguishing system (manual)Fogmaker extinguishing system (automatic)Ansul extinguishing system (manual)Ansul extinguishing system (automatic)Tempus manually actuated (Non CE)Automatic lubrication system for carrier and lifter (Lincoln)4 m3/min hydraulic driven compressor on front rackFast fuel filling system Wiggins1 extra hand held fire extinguisher (12 kg)1 extra rotating beacon amber1 extra rotating beacon red1 extra rotating beacon blue1 extra strobe light whiteTools for maintenance2 pcs wheel chocks with bracketsReversing cameraNT60 spare wheelText labels in: Fin / Por /GB / Swe / Rus / Nor / Ger / Fra / Spa / Ita


Documents

Charmec 6605 B 17008398