Class ： 碩研機械一甲 Name ： 張詔銘 Student ID ： M9910103 Date ： 2011.05.29
17
Use of micro ultrasonic vibration lapping to enhance the precision of micro holes drilled by micro electro-discharge machining Class ：碩碩碩碩 碩 一 Name ：碩碩碩 Student ID ： M9910103 Date ： 2011.05.29 碩碩碩碩碩碩碩 碩碩碩碩碩 「」 碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩碩
Class ： 碩研機械一甲 Name ： 張詔銘 Student ID ： M9910103 Date ： 2011.05.29
微細放電加工學 「期末報告」. 結合微細放電與超音波振動研磨提高鑽微小孔之精度. Use of micro ultrasonic vibration lapping to enhance the precision of micro holes drilled by micro electro-discharge machining. Class ： 碩研機械一甲 Name ： 張詔銘 Student ID ： M9910103 Date ： 2011.05.29. Outline. 現有技術 前言及研究目的 研究方法 實驗 結果 探討 結論 參考文獻. - PowerPoint PPT Presentation
Citation preview
PRESENTATION NAME
Use of micro ultrasonic vibration lapping to enhance the
precision of micro holes drilled by micro electro-discharge
machiningClassName Student ID M9910103Date2011.05.29 Outline 1.
+USM 2. +ECDM 3. + LIGA 4. +chemical etching 5. ++ 6. BBM
Micro-EDM100 m()
Micro-EDM
Micro-EDM (XY Z C)Micro-EDM()(titanium plate)(micro-hole)500 m5
mMicro tools 0.3 mm
1007.50.5 mm copper plates10100.5 mm titanium plates
Titanium alloy (Ti6Al4V)
MEDMMUVL
3m
30 kHz
()
5%, 10%, 20% and 30%
5%10%
20%
Only Micro-EDM
Only Micro-EDM (Conclusion)MEDMMUVL5.4mA. C. Wang, B. H. Yan, X.
T. Lee, F. Y. Huang, Use of micro ultrasonic vibration lapping to
enhance the precision of micro holes drilled by micro
electro-discharge machining, International Journal of Machine Tools
& Manufacture 42(8) (2002) 915-923., A study of analysis and
improvement on strength of micro shaft manufactured by micro-EDM,.,
,.Thanks for you attention!!
