Code Rahasia Ponsel GSM

8/3/2019 Code Rahasia Ponsel GSM

1/21

Code rahasia ponsel GSM & CDMA super lengkap !!

for samsung

*#9998*228# : Battery status (capacity, voltage, temperature)

*#9998*246# : Program status

*#9998*289# : Change Alarm Buzzer Frequency

*#9998*324# : Debug screens

*#9998*364# : Watchdog

*#9998*377# : EEPROM Error Stack - Use side keys to select values. Cancel and ok.

*#9998*427# : Trace Watchdog

*#9998*523# : Change LCD contrast - Only with version G60RL01W

*#9998*544# : Jig detect

*#9998*636# : Memory status

*#9998*746# : SIM File Size

*#9998*778# : SIM Service Table*#9998*785# : RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory

error.

*#9998*786# : Run, Last UP, Last DOWN

*#9998*837# : Software Version

*#9998*842# : Test Vibrator - Flash the screenligth during 10 seconds and vibration

activated.

*#9998*862# : Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# : Diag

*#9998*947# : Reset On Fatal Error

*#9998*999# : Last/Chk

*#9998*9266# : Yann debug screen (=Debug Screens?)*#9998*9999# : Software version

If the up Codes doesn't work, you should change *#9998* to *#0. i.e. *#9998*523# change to

*#0523#. An other thing that will help is to remove your SIM card. *0001*s*f*t# : Changes

serial parameters (s=?, f=0,1, t=0,1) (incomplete)

*0002*?# : unknown

*0003*?# : unknown

SP-unlock SGH-600 (and also SGH-Sgh-600)

*2767*3855# : Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )

But also changes IMEI to 447967-89-400044-0. (Doing this is illegal)

*2767*2878# : Custom EEEPROM Reset

*These codes have been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

for d500

*#11[quote]11# S/W Version

*#1234# Firmware Version

*#2222# H/W Version

*#8999*8376263# All Versions Together


2/21


3/21

#*4263# Handsfree mode Activate/Deactivate

#*4700# Please use function 2637

#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)

#*2558# Time ON

#*3370# Same as 4700

#*3941# External looptest 115200 bps#*5176# L1 Sleep

#*7462# SIM Phase

#*7983# Voltage/Freq

#*7986# Voltage

#*8466# Old Time

#*2255# Call Failed

#*5187# L1C2G trace Activate/Deactivate

#*5376# DELETE ALL SMS!!!!

#*6837# Official Software Version: (0003000016000702)

#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)

#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)#*2337# Permanent Registration Beep

#*2474# Charging Duration

#*2834# Audio Path (Handsfree)

#*3270# DCS Support Activate/Deactivate

#*3282# Data Activate/Deactivate

#*3476# EGSM Activate/Deactivate

#*3676# FORMAT FLASH VOLUME!!!

#*4760# GSM Activate/Deactivate

#*4864# White Screen

#*5171# L1P1

#*5172# L1P2

#*5173# L1P3

#*7326# Accessory

#*7683# Sleep variable

#*8465# Time in L1

#*2252# Current CAL

#*2836# AVDDSS Management Activate/Deactivate

#*3877# Dump of SPY trace

#*7728# RSAV

#*2677# Same as 4700

#*3797# Blinks 3D030300 in RED#*3728# Time 2 Decod

#*3725# B4 last off

#*7372# Resetting the time to DPB variables

#*7732# Packet flow context bit Activate/Deactivate

#*6833# New uplink establishment Activate/Deactivate

#*3273# EGPRS multislot (Class 4, 8, 9, 10)

#*7722# RLC bitmap compression Activate/Deactivate

#*2351# Blinks 1347E201 in RED

#*4472# Hysteresis of serving cell: 3 dB

#*2775# Switch to 2 inner speaker

#*9270# Force WBS#*7878# FirstStartup (0=NO, 1=YES)


4/21

#*3757# DSL UART speed set to (LOW, HIGH)

#*8726# Switches USBACM to Normal

#*8724# Switches USBACM to Generator mode

#*8727# Switches USBACM to Slink mode

#*8725# Switches USBACM to Loop-back mode

#*3838# Blinks 3D030300 in RED#*2077# GPRS Switch

#*2027# GPRS Switch

#*0227# GPRS Switch

#*0277# GPRS Switch

#*22671# AMR REC START

#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)

#*22673# Pause REC

#*22674# Resume REC

#*22675# AMR Playback

#*22676# AMR Stop Play

#*22677# Pause Play#*22678# Resume Play

#*77261# PCM Rec Req

#*77262# Stop PCM Rec

#*77263# PCM Playback

#*77264# PCM Stop Play

#*2872# CNT

*#8999*283# ???

#*22679# AMR Get Time

*288666# ???

*2886633# ???

*#8999*364# Watchdog

nokia cdma

*3001#12345#

LG CDMA SECRETS CODES

Field Test MENU > 0 > 000000 > Field Test Other Programming Secrets:

LGC-300 programming:

menu + 9 and enter SPC: "000000" or may be other SPC typed by user. A-Key: press STO

for some time while you can see special code enter zone. Type 2539** and enter A-key

LGC-330W programming:

menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type

2539** and enter A-key

LGC-800W /500 programming:


5/21

menu + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type 2539**

and enter A-key

LGC-510 programming:

menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user. A-Key: type2539** and enter A-key

LG1010, LG4NE1, TP2200, TP2100, Touchpoint, SB/DB, TP1100 and TP5200

Press ## Enter the OTKSL Scroll to SAVE and press OK Scroll to MIN and press OK Enter

10 digit MIN scroll to SAVE and press OK Scroll to SID and press OK (Skip on 4NE1 go to

RESET PHONE and press OK to complete) Enter SID (4654) and scroll to SAVE and press

OK Programming is complete

LG5350

Enter ## and enter the OTKSL and press the left soft key under the word Save At the

Service Program display select Mobile Phone # and press the OK in the center of the 4 way

navigation key Enter the 10 digit MIN and press OK Scroll down to 4. Advanced and press

OK Scroll to NMSI and press OK Enter the MSID and press OK Scroll down to 9. Amps

Phone # and press OK Enter the MSID and press OK

Press the END key

MOTOROLA PROGRAMING CODES

Analog Models

Changing the Banner: #PROGRAM# or [Fcn] 0000000000000 (13 0's)

Field Test: [Fcn] 0 0 * * TESTMODE [Sto]

Reset Timers: Follow the Field Test procedure above and then #32#

Alternative Programming Menu: #55#

(Not sure): # [SID code]#* SEND

Programming of various other models:

V60c Programming Mode:

74663 # [Menu] [Menu] (you will need the programming code)

Field Test: [Menu] 073887 * (you will need the security code -- try 000000)

To deactivate field test: Power phone up, hit MENU and the left button (should bring up themenu). There's a menu option for test-mode and at this point you can turn the menu off and


6/21

return the phone to normal. Alternatively press menu and then the nearest button to the left

(Phone book button) quickly and it will take you back to the main screen and your phone will

look normal.

StarTac 7790

Field Test: [Fcn] 0 0 * * TESTMODE [Sto]

StarTac 7760, 7860

Field Test: [Fcn] 0 0 * * TESTMODE [Sto] Service Menu: [Fcn] 0 000000 000000 RCL

Complete system test (most models): (Phone OFF), Hold down any row of keys (1+2+3,

4+5+6, etc) and turn the phone ON

To access the diagnostic mode on the I30: #, *, MENU, JOYSTICK-RIGHT (Do these

keystrokes fast)

To access the diagnostic mode on any of the older iDEN phones (pre-i1000): VOLUME

DOWN, MENU, MENU, MENU, LEFT, MENU, MENU, LEFT (this is the reverse of the

test menu routine)

To access the diagnostic mode on any of the new models (i1000+, i700+, i550+, etc): Hold

down any three keys in a row across.

The unit will enter the test mode and can be stepped through the various functions with the

keys and buttons. At the end of the test, power cycle the unit to return to normal function.

This test will check various phone functions, including LCD display, speaker, earphone,

microphone, LEDs, vibrator, backlight and all of the buttons and keys for the newer models

SAMSUNG CDMA SECET CODES

Older Models:

NAM Programming: 47*869#08#9

Test mode: *759#813580 OR 5809540*45680

Exit Test Mode: 02 A-Key: menu + 0,

code 25##

Samsung SPH-T100

MENU 820 > 810325

Samsung SCH-3500

MENU 820 > 295184


7/21

Programming of various other models:

Samsung A500

Enter ## and the 6 digitOTKSL

SERVICE MENU will appear and 1.Basic will be highlighted

Press OK Device will display NAM CDMA/ Phone Number

Enter 10 digit MIN Press OK (3 times) Display will return to Service Menu.

Press END. Programming is complete

Samsung N240 and N400

Enter ## and type in the 6 digit OTKSL

The display will show SVC MENU and 1. Phone Number

Press OK Enter the 10 digit MIN and press OK

The display will show NAM with Home SID on the second line (Note: SID is no longer used)

Press OK

The display will return to the SVC MENU

Press END to complete the programming

Samsung N300

Press ## followed by the OTKSL

SVC menu will be displayed

Press 1 for Phone #

Enter the 10 digit MIN and press OK

MIN that was entered will be displayed press OKSVC Menu will display press 3 for NAM

Enter the 4 digit Home SID press OK

Press END and handset will power cycle

Samsung i300

Tap on the Phone Icon with stylus

Press #907*9#0 ENTER LOCK should appear on screen

ENTER OTKSL

SVC MENU will appear press 1

Enter 10 digit MIN and then press SAVE

Press SAVE againPress 3 and then press SAVE 6 times


8/21

Enter the HOME SID and press SAVE once

Press END key twice

Samsung A400 and A460

Enter ## and OTKSL

Press 1 for Basic at MENU (1 of Phone # when using the MSL)Enter 10 digit MIN and press OK

At 1.Basic Menu press the END key

Handset will power cycle

Samsung 3500, 8500, 6100, and N200

Press MENU

Press 6 0 (3500) 8 2 0 (8500/6100/N200)

Enter OTKSL

Press 1 at SVC MENU Screen

Enter MIN and press OK

Press OK 4 timesEnter SID (4654) and press OK

Press END key

Programming is complete

gsm NOKIA SECRET CODES

Nokia CodesThese Nokia codes will work on most Nokia mobile phones, however we accept

no responsibility of any kind for damage done to your phone whilst trying these Nokia secret

codes.

Nokia code Code function

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone

uses the best sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR)

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should

gain approx 30% more Talk Time

*#4720# With this Nokia code you can deactivate the Half Rate Codec

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line :

Software Release Date, 3rd Line : Compression Type

*#9999# Phones software version if *#0000# does not work *#06# For checking the

International Mobile Equipment Identity (IMEI Number)

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+"

symbols)

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+"symbols)


9/21

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+"

symbols)

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+"

symbols)

GSM SAMSUNG SECRET CODES

*#06# -> Show IMEI

*#9999# -> Show Software version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequency

*#9998*324# -> Debug screenslect values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detectService Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put

inmemory error.

*#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and

vibrationactivated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk


10/21

*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)

*0002*?# -> unknown

*0003*?# -> unknown SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! ) But also

changes IMEI to 447967-89-400044-0

*2767*2878# -> Custom EEEPROM Reset These codes has been tested with version

FLD_2C6 G60SB03X of Samsung SGH-600 type 8889 instead of 9998.

GSM MOTOROLA SECRET MOBILE CODES

Motorola

IMEI number: * # 0 6#

Net Monitor ON: * * * 1 1 3 * 1 * [OK]

Net Monitor OFF: * * * 1 1 3 * 1 * [OK]

* - press this until box shown up

To activate RBS:

(pause means the * key held in until box appears)

[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]

You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the

keys, and enable it.

To de-activate RBS,

[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]

This only works with some versions of software. Please report what works and doesn't for

you.

Reported working, by country:

d460: IT

6200 Flare: UK (Orange), AU

7500: IT (model: F16 HW: 5.2 SW: 2.1)

8200: ES, AU, NL, BE

8400: IT, NL8700: AU, IT, SG, DE, ES, ZA


11/21

Uses of RBS:

Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng

Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until

'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result

is the distance from the RBS (Radio Base Station), in meters.

Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select

'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it

becomes negative for longer than 5 seconds, a new cell is selected.

SONY ERICSSON SECRET CODE

General Secrets

IMEI (International Mobile Equipment Identity): *#06#

Firmware Version: >* (to exit 3 +

CDMA Mode: 904093 + menu

Analog Mode: 904095 + menu DM mode 904959 + menu


12/21

GSM PHILIPS SECRET CODES

Philips GENIE

To view IMEI number *#06#

*#2254*# is the statusregister: C, BS, RR, MMI, CREAT.

*#2255*# will activate and deactivate the "DEBUG CALL"-Mode

*#2558*# will display the time in days,hours and minutes you are connected to the GSM

network

To force a reconnection to the network, type : *#2562*#

To view and modify the Security Code of the phone, type: *#7489*#

To view some info about your SIM card like the phase level, the name, type: *#7378*#

To obtain information on SIM lock, Init and Flags, press: *#3377*#

To activate or deactivate Sleep Mode: *#7693*#

To get info about Sleep Mode: *#8463*#

Philips FIZZ

IMEI: *#06#

Lock Code: *#1234#

Software Version

To find software version, enter *#8377*#

The output will look something like:

Version : 0916 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

..or extended software version *#5644*#

output:

Version : 09162205 - EEPROM : 00000000-00 - TDA : 2445 - KISS : 0502 SIM-LCK

SM ALCATEL SECRET MOBILE CODES

ALCATEL


13/21

* # 0 6 # : IMEI number

* # 0 6 # : Software version

0 0 0 0 0 0 * : Net Monitor

PINOUTS AND CODES FOR PANASONIC MOBILES

Panasonic G500

IEMI:


--------------------------------------------------------------------------------

PINOUTS

1 - Ground

2 - TX_Audio

3 - Audio_Ground

4 - HF_ON (L=ON) -> L=H/F ON

5 - AOP_Sense


14/21

9268 (OK) Displays Serial Number

7332 (OK) Displays the date of the last repairment - if found

7832 (OK) Displays (if found) the date where the phone was purchased

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!)

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

Nokia 101 cell phone lockcode

Jul, 10 2000 - 02:35

Nokia 101 cell phones set up by Bell Mobility in Toronto can have their lock code

circumvented by the following method:

Type: * 3001 # 12345 [STO] 00Wait for: NOT DONE

Type: [RCL] 01

Clear old lock code (the last four digits) and enter a new lock code. Be very careful not to

delete other characters.

Type: [STO] 01 [STO]

Turn power off.

Nokia 9000/9000i

Nov, 25 2000 - 22:41


To view Software Version enter *#8110# Latest Version is under Phone Info.

To view Week and Year of manufacture enter *#3283#

Last edited by Ki_Kusumo; 19-12-2007 at 09:29 AM.

Reply With Quote Multi-Quote This Message Quick reply to this message

Ki_Kusumo

View Public Profile

Send a private message to Ki_Kusumo

Find all posts by Ki_Kusumo#2 Add to Ki_Kusumo's Reputation Report Post

Old 19-12-2007, 09:43 AM

Ki_Kusumo's Avatar

Ki_Kusumo Ki_Kusumo is offline

Sersan

Join Date: Dec 2007

Posts: 70

Ki_Kusumo adalah salah satu orang populer disiniKi_Kusumo adalah salah satu orang

populer disiniKi_Kusumo adalah salah satu orang populer disiniKi_Kusumo adalah salah

satu orang populer disiniKi_Kusumo adalah salah satu orang populer disiniKi_Kusumoadalah salah satu orang populer disiniKi_Kusumo adalah salah satu orang populer


15/21

disiniKi_Kusumo adalah salah satu orang populer disiniKi_Kusumo adalah salah satu orang


satu orang populer disiniKi_Kusumo adalah salah satu orang populer disini

Default

Samsung SGH-600 / SGH-2100

Secret Codes

*#06# -> Show IMEI

*#9999# -> Show Software Version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequency

*#9998*324# -> Debug screens*#9998*364# -> Watchdog

*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detect

*#9998*636# -> Memory status

*#9998*746# -> SIM File Size

*#9998*778# -> SIM Service Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in

memory error. *#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration

activated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version

*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)

*0002*?# -> unknown

*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )

But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the IMEI

program found on the software page.

*2767*2878# -> Custom EEEPROM Reset


16/21

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

Samsung 811

Jul, 08 2000 - 01:24

47*869#08#9

- unlock code / change roaming code / ID

SIEMENS S1 / S3 / S3 COM / S4

To view the software date and else with S3 com, S4, S4Power

press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power

press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Powerpress with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),

5553756, HangUp Button (Red HandSet key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button

(left MENU key), 7684666, HangUp Button (Red HandSet key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show alist of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)


17/21

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level

SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.

Turn the phone on. Enter PIN. Before the telephone has logged in to the

your GSM net do the following steps.

1: Choose F 9 (function settings)

2: Choose send own number and push the right button for choose.

3: Push 9

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.

I have just heard from one of the programmers of the phone that Tetris

was in the phone during development, but it was removed before it was produced.

Apparantly someone has the patent on games in mobile phones and Siemens

didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's not there at all.

Reply With Quote Multi-Quote This Message Quick reply to this message

Ki_Kusumo

View Public Profile

Send a private message to Ki_Kusumo

Find all posts by Ki_Kusumo

#3 Add to Ki_Kusumo's Reputation Report Post

Old 19-12-2007, 09:44 AMKi_Kusumo's Avatar

Ki_Kusumo Ki_Kusumo is offline

Sersan

Join Date: Dec 2007

Posts: 70

Ki_Kusumo adalah salah satu orang populer disiniKi_Kusumo adalah salah satu orang


satu orang populer disiniKi_Kusumo adalah salah satu orang populer disiniKi_Kusumo

adalah salah satu orang populer disiniKi_Kusumo adalah salah satu orang populer

disiniKi_Kusumo adalah salah satu orang populer disiniKi_Kusumo adalah salah satu orangpopuler disiniKi_Kusumo adalah salah satu orang populer disiniKi_Kusumo adalah salah


18/21

satu orang populer disiniKi_Kusumo adalah salah satu orang populer disini

Default

Siemens C 25

Secret Codes

SP unlock *#0003*(secret code 8 digits)#

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Pin Out

1- GND

2- SB

3- POWER4- NC

5- TX

6- RX

7- CLOCK

8- DATA

9- GND MIC

10- HF MIC

11- AUDIO

12- GND AUDIO

Sagem MC959

Secret Codes

MC959

in main menu press * for hot-menu:

lcd, led, vibra, tests, imei, software versions, battery voltage

Type MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and815 plus) phones.

Panasonic G500

IEMI:


--------------------------------------------------------------------------------

PINOUTS


19/21

1 - Ground

2 - TX_Audio

3 - Audio_Ground

4 - HF_ON (L=ON) -> L=H/F ON

5 - AOP_Sense


20/21

To view the software date and else with S3 com, S4, S4Power

press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power

press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power

press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),

5553756, HangUp Button (Red HandSet key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button

(left MENU key), 7684666, HangUp Button (Red HandSet key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a

list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point


21/21

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level

SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.

Turn the phone on. Enter PIN. Before the telephone has logged in to the

your GSM net do the following steps.

1: Choose F 9 (function settings)

2: Choose send own number and push the right button for choose.

3: Push 9

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4

Documents

Code Rahasia Ponsel GSM