Cover sheet.pptx [호환 모드] - KOTRA Brasil · actuators which are classified into the Scotch Yoke types such as EPT, EPA, EHT actuators and ... • Samsung Total Petrochemical

Flowbus CorporationPrequalification

• Doc. No. 01 Company Profile

• Doc. No. 02 ISO, ATEX, SIL, CE, GOST-R Certificates

• Doc. No. 03 User Approvals

• Doc. No. 04 Reference List

• Doc. No. 05 General Catalogue

Prequalification Index

FLOWBUS CORPORATION

No. 01 Company Profile

Flowbus Corporation

Flowbus Corporation 1239-8, Jeongwang-Dong,

Siheung-si, Gyeonggi-do, 429-450, Korea Tel +82 31 319 9301 Fax +82 31 433 9180

Homepage : www.flowbus.com Email : [email protected]

Brief Introduction

We would like to introduce Flowbus Corporation as one of the most reliable suppliers for pneumatic and hydraulic actuators and valve automation, and is committed to its philosophy of

“Process Valve Control & Safety Specialist”. We started its business on Nov. 25th, 2004 presently, we are engaged in the business fields of Onshore and Offshore oil and gas, Power generation, Petro-Chemical, Desalination and Water treatment by providing the completely tailored solutions of the industrial automation valves.

With our uniqueness and commitment to the customers, we became the leading supplier of the wide range of products from simply on-off to complete valve automation systems since started the business based on Gwangju manufacturing plant, Korea in Nov. 2004.

In June 2010, for capitalizing on our own enlarged R&D and production capacity whilst increasing quality control and on-time services, we have expanded our manufacturing plantand headquarter to the Sihwa industrial complex, Korea where operates in conformity with ISO9001:2008, ISO14001:2004 and OHSAS18001:2007 so that our customers can select Flowbus products with confidence.

Our pneumatic & hydraulic actuators are produced on the basis of well-founded facilities, state-of-the art technology and skills. We design, manufacture and test the light to heavy duty actuators which are classified into the Scotch Yoke types such as EPT, EPA, EHT actuators and Rack & Pinion type; EPR actuators.

Flowbus is a symbol for the high quality and services and are operating the management under ISO International Standards for Quality System. We are highly reputed by the major customers in the industries and are always doing our utmost effort to provide safety and reliability by exceeding the customers’ expectation.

Flowbus Corporation



Homepage : www.flowbus.com Email [email protected]

Company Profile

1.1 Full Legal Name, Address and Financial Statement of Company

a) Ownership Details: FLOWBUS Corporation

b) List of Shareholders / owners: Same as No. a)

c) Name of Parent Company (If any): none

d) Full Address (Headquarters & Factory and Sales office, Busan Office, Japan Office):

Headquarters & Factory

1239-8 Jeongwang-Dong, Siheung-si, Gyeonggi-do, Korea

Sales Office

7F, Insu B/D, 205-4 Bangi-Dong, Songpa-Gu, Seoul, Korea

Busan Office Japan Office

#201, 580-8, Gwaebeop-Dong, Level 9, Edobri centre building, 2-1-1, Sasang-Gu, Busan, Edobori, Nishi-ku, Osaka Korea Japan

Flowbus Corporation




Company Profile

History

2004.11. Established Flowbus Corporation for design, manufacture and supply Pneumatic Heavy & Medium Duty Actuators related to Oil Refinery, Petro-Chemical, Power Generation, Marine and Offshore, Water Treatment and Water Works, and Building System in Mugab ri, Gwangju si, Korea

2004.12. ISO 9001 : 2000 Certified from TÜV Germany

2005.02. Launched the High Quality Rack & Pinion Actuators (EPR-Series)

2005.10. ATEX 94/9/EC Certified by TÜV Germany

2005.10. PED 97/23/EC Certified by TÜV Germany

2005.11. Launched the Compact and Rugged Declutchable Gear Operator (FB-Series)

2006.04. Expanded the production line by opening the Flowbus Factory No.2, Gwangju, Korea

2006.10. Consulted IEC 61508 : 2000 by Exida, Germany

2007.09. Safety Integrity Level 3, 4 Certified by TÜV Germany

2008.02 Launched the Heavy Duty Hydraulic Actuators (EHT series)

2009.04 Purchased land for expanding the head quarter, production line, R&D centre.

2010.06 Moved the Headquarter and production line, R&D centre to Siheung, Korea (Gross area 6,597.5 m²)

2010.11 Launched the Electro-Hydrualic Actuaors (EEHT Series)

2011.02 Open the Global Head Office in Osaka, Japan

2012.09 Launched the Compact Hydraulic Actuator(EHA Series), Linear Actuator (EPL Series) and Compact Pneumatic Rack & Pinion Actuator(EPAR Series)

2012.11 GOST-R Certified by Certificate of Conformity in Russia

Flowbus Corporation




Products and Services

1. Products

1) Pneumatic Actuator

a. Heavy Duty Scotch-Yoke Design : EPT-Series

b. Medium Duty Scotch-Yoke Design : EPA-Series

c. Medium Duty Linear Design :EPL-Series

d. Light Duty Scotch-Yoke Design : EPRY-Type

e. Light Duty Rack & Pinion Design : EPR-Series

f. Light Duty Rack & Pinion Design :EPAR-Series

g. Quick Operating Pneumatic Actuator

2) Hydraulic Actuator

a. Heavy Duty Scotch-Yoke Design : EHT-Series

b. Light Duty Rack & Pinion Design :EHA-Series

c. Electro Hydraulic Scotch-Yoke Design

d. Quick Operating Hydraulic Actuator

3) Manual Override

a. Declutchable Gear Override :FB-Series

b. Jackscrew Override

c. Hydraulic Override

Flowbus Corporation




Products and Services

2. Services

a. Build up most suitable Valve Automation Systems such as

Emergency Shutdown (ESD)

High Integrity Pressure Protection System (HIPPS)

Partial Stroke Test (PST) according to EC61508

Fire Protection to UL1709,

Pneumatic / Hydraulic Control Panels,

Local Control Panels,

Quick Operation,

Lockup Function,

Fieldbus Modulating Duties

b. Design and produce the valve mounting kits

c. Actuator Overhaul, Retrofit and Preventative Maintenance

Flowbus Corporation

FLOWBUS CORPORATION

No. 02 ISO, ATEX, SIL, CE, GOST-R Certificates

Flowbus Corporation

FLOWBUS

CORPORATION

No. 03 User Approvals

Flowbus Corporation

02 Flowbus Values

FLOWBUS values Support our customer’ valve automation through 4 key values

1) Innovative solution-Continued product development to meet ever-changing demand

-Fundamental research for actuation

2) Total cost benefit-Guaranteed short delivery time-Complete actuation package-Reliable product and project management

3) Customer oriented attitude-Fast responses and proactive approach-Full technical and engineering support-Flexibility to build tailor made solutions

4) Highly motivated people-Professional, fully trained and experienced staff-Exceeding customers expectation through team work

As a valve control and safety system specialist, Flowbus is committed to provide

“Ultimate safety and reliability” to you.Just “Trust us”

03 Reliability and confidence

Reliability and confidenceUser Approval

• Abu Dhabi Gas Liquefaction Company(ADGAS)

• Ruwais Fertilizer Industries(FERTIL)

• Saudi Basic Industries Corp.(SABIC)

• Abu Dhabi Oil Refining Company(TAKREER)

• Kuwait Oil Company(KOC)

• Kuwait National Petroleum Co.(KNPC)



• Samsung Total Petrochemical

• PT Pertamina

• Saline Water Conversion Corporation(SWCC)

• Petronas Carigali

• PTT Gas Separation Plant(PTT GSP)

• PDVSA (Petróleos de Venezuela S.A.)



• Daewoo Shipbuild & Marine Eng.

(DSME)

• Doosan Heavy Ind. & Con.

• Halla Energy & Environment

• Hitachi Ltd.

• Wongjin Polysilicon

• Honam Petrochemical Corp.

• LG Chem. Ltd.

• OCI Corp.

• Samnam Petrochemical Co.

• Samyang Innochem


Reliability and confidenceCustomer happy letters

• Kuwait National Petroleum Company(KNPC)

• POSCO

• Samsung Engineering & Construction Ltd.(SECL)

• Daewoo Shipbuilding & Marine Engineering(DSME)

• Samsung TOTAL Petrochemical

• Process Group International(PGI)

Met our overall project quality requirements-Operations Manager / PGI

Confident enough that after assessment and review oftheir performance and the related service- Purchasing Manager/ DSME

Performing satisfactorily since

commissioned.-Manager E&M (MAA)/KNPC

FLOWBUS

CORPORATION

No. 04 Reference List

Flowbus Corporation

Order Date Country User Name Name of Project Industry Actuator Model Valve Type Valve Rating Valve Size Configuration

Jun-2013 VIETNAM PV TRANSPORTATION CORPORATION FPSO EMAS (REPLACEMENT) MARINE EPA BUTTERFLY 150# 10' SR

Mar-2012 KOREA TRANSOCEAN INC. H3612 MARINE EPR DAMPER - - SR

Mar-2013 MALAYSIA PETRONAS CARIGALI SDN. BHD F-LNG (H6302) MARINE EPT DAMPER - - SR

Mar-2013 NORWAY ODFJELL SEMI RIG (H3033) MARINE EPA BALL - 12" SR

Nov-2012 MALAYSIA PETRONAS CARIGALI SDN. BHD RESAK PLATFORM MARINE EPT BALL - 8" SR

Nov-2012 USA ATWOOD H3614 DAMPER A/S MARINE EPR DAMPER - - SR

Jul-2012 USA ATWOOD H3514 DAMPER MARINE EPR DAMPER - - SR

May-2012 MALAYSIA PETRONAS CARIGALI SDN. BHD RESAK PLATFORM MARINE EPT BALL - 24" ~28' SR

May-2012 KOREA TRANSOCEAN INC. H3613 MARINE EPR DAMPER - - SR

May-2012 KOREA PETROSERV H.3028-F.W Cooling system Valve change MARINE EPR BUTTERFLY 150# 6" DA

May-2012 KOREA VANTAGE HN 3601 MARINE EPR DAMPER - - SR

Apr-2012 BRAZIL OSX PRESAL FPSO MARINE EPA BUTTERFLY 6", 8", 10" SR

Apr-2012 USA ATWOOD H3614 DAMPER MARINE EPR BUTTERFLY - 8" SR

Apr-2012 BRAZIL OSX PRESAL FPSO MARINE EHT BUTTERFLY - 6" DA, SR

Feb-2012 USA TRANSOCEAN INC. H3612, AKER DRILLING DEEPWATER DRILLSHIP MARINE EPR BUTTERFLY 150# 6" ~ 12" DA

Updated : JUN. 2013Sales Reference List (MARINE)

Flowbus Corporation 1 of 6



Feb-2012 KOREA DAEWOO SHIPBUILDING & MARINE ENGINEERING H3609,H0610 A/S MARINE EPR DAMPER - - SR

Dec-2011 USA TRANSOCEAN INC. H.3612 WATERTIGHT VALVE MARINE EPA BUTTERFLY 150#,JIS10K 350A SR

Nov-2011 USA ATWOOD H3614 DAMPER MARINE EPR DAMPER - - SR

Oct-2011 USA ATWOOD H.3614 WATERTIGHT VALVE MARINE EPA BUTTERFLY 150#,JIS10K 350A SR

Oct-2011 USA VANTAGE H3615 MARINE EPR DAMPER - - SR

Oct-2011 USA TRANSOCEAN INC. DRILL SHIP MARINE EPA BUTTERFLY 150# 150A DA

Sep-2011 USA ATWOOD H.3614 WATERTIGHT VALVE MARINE EPR BUTTERFLY, BALL 150#,JIS10K 2"~12" SR,DA

Sep-2011 USA VANTAGE H.3615 WATERTIGHT VALVE MARINE EPR BUTTERFLY 150#,JIS10K 5"~8" SR,DA

Sep-2011 USA VANTAGE TUNGSTEN EXPLOER (H.3615) MARINE EPR BUTTERFLY 150# 5" ~ 12" DA & SR

Sep-2011 USA ATWOOD ATWOOD ADVANTAGE DRILLSHIP (H.3614) MARINE EPR BUTTERFLY 150# 4" ~ 10" DA & SR

Aug-2011 KOREA HEEREMA OFFSHORE H3402 WATERTIGHT VALVE MARINE EPR, EPT BUTTERFLY 150# 100A~650A SR

Aug-2011 USA VANTAGE H 3615 MARINE EPR, EPA BUTTERFLY 150# 150A, 300A SR

Aug-2011 USA NOBLE DRILLING HOLDING LLC M4001 NOBLE DRILLSHIP MARINE EPT, EPA BALL - - SR

Apr-2011 BRAZIL PETROBRAS FPSO MARINE EHT BUTTERFLY 150# 28" DA

Apr-2011 GERMANY RWE INNOGY SELF-PROPELLED ELEVATING PLATFORM (H.3303, H.3304) MARINE EPR BUTTERFLY JIS 5K 6" SR




Feb-2011 USA NOBLE DRILLING HOLDING LLC NOBLE GT II DRILLSHIP, F1004 MARINE EPR BUTTERFLY 150# 2"~ 6" DA & SR

Dec-2010 BRAZIL PETROBRAS FPSO CIDADE DE PARATY MARINE EHT DAMPER - - SR

Oct-2010 BRAZIL ODEBRECHT H.3610 MARINE EPR DAMPER - - SR

Sep-2010 BRAZIL ODEBRECHT H3610 Watertight MARINE EPR, EPA BUTTERFLY 150# 6", 14" SR

Aug-2010 BRAZIL ODEBRECHT H3609 Watertight V/V MARINE EPR, EPA BUTTERFLY 150# 5", 14" SR

Aug-2010 BRAZIL PETROSERV H3028 Petroserv Rig MARINE EPR BUTTERFLY 150# 2", 5" SR

Jul-2010 NETHERLANDS BLUEWATER ENERGY SERVICES B.V. BLUEWATER FPSO MARINE EPT BALL, BUTTERFLY 150# 12" DA

Jul-2010 BRAZIL ODEBRECHT H.3609 MARINE EPR DAMPER - - SR

Feb-2010 BRUNEI BRUNEI GAS CARRIERS Sendirian Berhad BRUNEI 147,000M3 LNGC MARINE EPR DAMPER - - SR

Jan-2010 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) H.3602 MARINE EPR DAMPER - - SR

Jan-2010 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) H.3602 Watertight MARINE EPR BUTTERFLY 150# 6" SR

Nov-2009 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) TMT DRILLSHIP 3602 MARINE EPR BUTTERFLY 150# 2" ~ 12" SR

Nov-2009 USA NOBLE DRILLING HOLDING LLC M4001 NOBLE DRILLSHIP MARINE EPR BUTTERFLY 150# 2" ~ 6", 25A ~ 50A SR

Nov-2009 BRAZIL PETROSERV PETROSERV H.3605 MARINE EPR DAMPER - - SR

Nov-2009 BRAZIL ODEBRECHT ODEBRECHT H.3604 MARINE EPR DAMPER - - SR




Aug-2009 BRAZIL PETROSERV PETROSERV H.3605 (Bulk Air) MARINE EPR BUTTERFLY 150# 5" SR

Jul-2009 BRAZIL PETROSERV CAROLINA DEEPWATER DRILLSHIP MARINE EPR BUTTERFLY JIS10K, 150# 2" ~ 12" DA

Jul-2009 BRAZIL ODEBRECHT H.3604 Watertight Valve MARINE EPR BUTTERFLY JIS 5K 6" SR

Jul-2009 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) TMT DRILLSHIP 3603 MARINE EPR DAMPER - - SR

Jul-2009 BRAZIL ODEBRECHT H3604 ODEBRECHT #2 MARINE EPR BUTTERFLY 150#, JIS10K 2" ~ 12" DA

Jun-2009 RUSSIA GAZFLOT S.7075 GAZFLOT MARINE EPA BALL 150# 1" ~ 4" SR

May-2009 BRAZIL ODEBRECHT H3603 ODEBRECHT (BULK AIR) MARINE EPR BUTTERFLY 150# 5" SR

May-2009 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) H.3601 WATERTIGHT VALVE MARINE EPR BUTTERFLY JIS 5K 6" SR

May-2009 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) TMT DRILLSHIP 3601 MARINE EPR DAMPER - - SR

Apr-2009 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) TMT DRILLSHIP 3603 MARINE EPR DAMPER - - SR

Mar-2009 BRAZIL ODEBRECHT H.3603 ODEBRECHT MARINE EPR BUTTERFLY 150# 2" ~ 12" DA

Feb-2009 TAIWAN TMT (TAIWAN MARITIME TRANSPORT CO., LTD.) TMT DRILLSHIP 3601 MARINE EPR BUTTERFLY 150#, JIS5K 2" ~ 12" DA

Feb-2009 U.A.E. ADMA - OPCO UMM SHAIF GAS (ADMA OPCO) MARINE EPA BALL 150# 1/2" ~ 2" SR

Dec-2008 RUSSIA GAZFLOT GAZFLOT DRILLSHIP MARINE EPA BALL 150# 1" ~ 4" DA & SR

Aug-2008 USA TRANSOCEAN INC. TRANSOCEAN H.3054 MARINE EPA BUTTERFLY 150# 2" ~ 12" SR




Jun-2008 JAPAN MODEC INC. PYKENESS FPSO MARINE EPT BUTTERFLY 150# 20" SR

May-2008 SINGAPORE PPL SHIPYARD - MARINE EPR BUTTERFLY 150# 2" ~ 6" DA

Mar-2008 KOREA HYUNDAI HEAVY INDUSTRIES CO.,LTD- HYUNDAI ENGINE MARINE EPT BUTTERFLY JIS10K 26" DA

Jan-2008 MALAYSIA MALAYSIA MARINE & HEAVY INDUSTIES - MARINE EPR BUTTERFLY 150# 10" ~ 14" DA

Dec-2007 MALAYSIA SAMARANG PLATFORM SMP-A & SMJT-C SAMARANG PLATFORM SMP-A & SMJT-C MARINE EPT BALL 300# 5" ~ 6" SR

Nov-2007 USA TRANSOCEAN INC. DRILLSHIP H.3503 MARINE EPA BUTTERFLY JIS16K 4" DA

Nov-2007 USA TRANSOCEAN INC. DRILLSHIP H.3503 MARINE EPA BUTTERFLY JIS 5K~JIS16K, 150# 2" ~ 12" DA

Aug-2007 SINGAPORE MODEC INC - MARINE EPT BALL 150# 16" SR

Aug-2007 SINGAPORE PPL SHIPYARD MYROA FPSO MARINE EPA BUTTERFLY 150# 6" ~ 16" SR

Jul-2007 USA TRANSOCEAN INC. DRILLSHIP H.3502 MARINE EPA BUTTERFLY JIS16K 4" DA

Jul-2007 USA TRANSOCEAN INC. DRILLSHIP H.3502 MARINE EPA BUTTERFLY JIS 5K~JIS16K, 150# 2" ~ 12" DA

Jul-2007 JAPAN KOREA GAS CORPORATION DONGHAE-1 GAS PLATFORM MARINE EPA BUTTERFLY 150# 6" ~ 8" SR

Feb-2007 KOREA HYUNDAI ENGINE HEAVY INDUSTRIES LTD. H1738 MARINE EPR BUTTERFLY 150# 5" ~ 8" SR

Jan-2007 KOREA HYUNDAI ENGINE HEAVY INDUSTRIES LTD. H1737 MARINE EPR BUTTERFLY 150# 5" ~ 8" SR

Dec-2006 USA TRANSOCEAN INC. DRILLSHIP H.3501 MARINE EPA BUTTERFLY JIS 5K ~ JIS16K, 150# 2" ~ 12" DA




Dec-2006 KOREA STX OFFSHORE & SHIPBUILDING - MARINE EPT BUTTERFLY 150# 16" SR

Feb-2006 KOREA HYUNDAI HEAVY INDUSTRIES CO.,LTD - MARINE EPR BUTTERFLY JIS 10K 16" DA


FLOWBUS

CORPORATION

No. 05 General Catalogue

Flowbus Corporation

ww

w.flow

bus.com

Specialistand System

Valve Control

CorporationSales Office 7F, Insu Bldg, 205-4, Bangi-Dong, Songpa-Gu, Seoul, 138-050, Korea Tel : 82 2 400 1880 Fax : 82 2 400 8240 E-mail : [email protected]

Japan Office Level 9, Edobori centre building, 2-1-1, Edobori, Nishi-ku, Osaka, Japan 550-0003 Tel : 81 6 6225 1060E-mail : [email protected]

Factory 703-1 Dadong, Sihwa Indutrial Complex, 1239-8, Jeongwang-Dong, Siheung-Si, Gyeonggi-Do, 429-450, Korea Tel : 82 31 319 9301 Fax : 82 31 433 9180 E-mail : [email protected]

Literature # PQ.008.05.Rev-6/Nov/01/2012Due to continuous development product data is subject to change without prior notice.

02 _ Process control and valve automation systems 03Flowbus Corporation _

Safety and Credibility From feasibility studies, engineering, and design and manufacture tomaintenance, the Flowbus Corporation is recognized as a leader in thevalve automation market for providing enhanced value to our customers.Major business areas include the design and manufacture ofindustrial valve actuators, as well as the fabrication of valve controland safety systems that enable our customers to improve theirperformance while lowering their total installed and running costs.

Engineered Valve Control ExpertiseThrough the incorporation of engineering excellence and the latestprecision manufacturing techniques, Flowbus offers comprehensivesolutions for project-specific customer requirements. By combiningour high quality product range, expertise, and process experience, weare able to solve complicated process problems with reliable, on-time packages.

Since its foundation in 2003, the company has experiencedremarkable growth in the international valve automation industry. Our proactive approach, involving the flexibility needed to build tailor- madesolutions along with continuous improvements and innovation, have allowed us to successfully and quickly develop our status in the global market. Our customers often remark on the excellent quality of Flowbus products and services.

Global AmbitionsFlowbus has always been preparing to capitalize on the potential ofthe international market. Being a global corporation does not simplymean setting the goal of expanding our business abroad. It meansaccumulating knowledge and experience in local markets and withlocal clients. We can then move forward with a long-termrelationship and partnership with clients from different countries toperfectly fulfill their requirements.

Cost Benefits andEffectiveness

Flowbus Provides

Technical and Engineering

Service

Innovative Valve Control

Solutions

High Level of Customer

Care

Introduction

ApplicationsOil & Gas We combine our extensive knowledge of the actuator packages in the oil and gas extractionindustry in relation to the operation and development of oil and gas fields as well as thepetroleum refining industry to optimize plant processes. In particular, the EPT and EPA seriesactuators have been certified to meet SIL 3 and 4 ratings in accordance with IEC61508/61511,thus assisting our valuable customers in operating their plants safely.

Chemical Flowbus meets the various requirements of the chemical industry such as those related topolythylene, polypropylene, monomers, solvents, and ethylene oxide. Because these substancesare flammable and reactive, special attention is required to control the environment during theirproduction and handling. By providing a broad range of actuator packages, Flowbus ensuresreliable solutions for the chemical and petrochemical industries.

Marine An extensive knowledge of valves and actuators enables Flowbus to offer complete actuatorunits to the marine industry for FPSO, FSO, LNG, drilling rigs, TLPs, and other technologies, whichwill meet the challenges of various types of production floaters. A Flowbus actuator packageprovides the most advanced technology and operating production efficiency with high reliabilityand enhanced safety by bringing together specialized expertise in the offshore industry.

PowerFlowbus’ reliable products and services support their client’s requirements in energyapplications. The EP & EH series actuators are designed to meet the harshest of servicerequirements and the most demanding of standards. Flowbus actuators are designed to exceedthe customer’s requirements in the most extreme environments on earth. Ultimately, thisenables us to help you increase your operational effectiveness.

DesalinationFlowbus supplies complete valve automation systems for three main desalination technologies:multi-stage flash (MSF), multi-effect distillation (MED), and reverse osmosis (RO). Our provenproject experience enables us to deliver reliable and cost-effective solutions with the shortestlead times in the industry and meet the market demand despite the fact that the world°Øsconsumption of fresh water is doubling every twenty years.

MiningFlowbus’ reliable actuators play critical roles in operating valves in severe mining applications,facing high pressure, slurry, and corrosive conditions. In processing facilities around the world,Flowbus is committed to providing essential expertise to the mining and mineral processingindustry with technically and environmentally sustainable solutions. Based on our accurate data,extensive experience, and technical expertise, Flowbus improves the safety and efficiency ofmining applications.

Reliability through Proven PerformanceBased on accurate data, extensive experience, excellent technical

expertise, state of the art facilities, and strict in-house testing,

Flowbus has been recognized as a reliable actuator manufacturer in

the global valve market. The customized valve control

solutions offered by Flowbus lead to considerably long,

safe, and effective operation and maintenance in our

customer’s plants.

05Flowbus Corporation _

Continuous Research and DevelopmentFlowbus focuses on the continuous improvement and innovation of

our products and services through years of experience and study.

Thanks to this commitment to developing high-quality and effective

products, Flowbus is able to offer a wide range of pneumatic,

hydraulic, and electro-hydraulic actuators with various designs:

double acting, spring return, rack & pinion,

symmetric, and canted yoke for rotary and

linear valve operations. Quick valve actuation

using pneumatic and hydraulic actuators designed by

Flowbus ensure excellent valve control in less than 1 s to the

valve’s safe position.

Testing, Accuracy, and AssuranceFlowbus is committed to

providing our customers

with quality products and

comprehensive valve

control solutions. Based on

our extensive knowledge

of the valve and actuator

industry, we test and

qualify a complete product

through strict in-house

tests. These tests are

conducted on every single

product before it leaves our premises. This allows us to ensure that

they not only meet the required specifications but also exhibit

superior performance that exceeds the customer’s expectations.

Technology and Engineering

Standards and International CertificationFlowbus products are designed, manufactured, and inspected in

conformity with

•ISO9001 •ISO14001 •SIL 3 & 4 •OHSAS 18001

•ATEX •CE 0036 •GOST-R •IP66/67

04 _ Process control and valve automation systems

EPA-Series actuatorsprovide rugged and compact solutions for quarter-turn valveactuation. The scotch yoke design offers a high torque output whilereducing maintenance requirements. They have been designed withan inherently safe spring return unit that prevents the accidentalrelease of the spring force, and ensures that installation ormaintenance can be performed in complete safety.

•Inherenly Safe Heavy Duty Design•Torque range 36 N.m(310 inch-lb) to 6,957 N.m (61,570 inch-lb)•Symmetric Scotch Yoke Mechanism•Dual Valve Mounting Pads for easy change the spring fail mode•Wear and Corrosion Resistance •Advanced Sealing Compounds •Suitable for harsh industries

EPR-Series actautors feature a compact Rack & Pinion and modernScotch Yoke mechanisms. The extruded aluminum body incorporatesan advanced, hard anodizing treatment on the internal and externalsurfaces and the body can also be provided in a number of optionalfinishes including PTFE coated, electroless nickel plated, and avariety of polyester power coated colors for udrability incrase andcorrosion protection.

•Extremely compact and modern design•Torque range 2 N.m (18 inch-lb) to 5,877 N.m (52,003 inch-lb) •Rack and Pinion, Scotch Yoke Mechanism•Extruded Aluminum Body•Wide Range of Torque Outputs•Corrosion Protection

An extremely compact rack & pinion EPAR actuators offer the mostreliable and economical solutions under the harsh environments. Themodular design allows the actuator to be easily converted fromdouble acting to sing acting configuration, and provide for the simpleaddition of ancillaries. The actuaors are designed to provide safe,simple and compact performance and maintenance The units aremanufactured with the highest QA procdures, so confidence is built in.

•Extremely compact heavy duty actuators•Torque range 12 N.m(52,016 inch-lb) to 4,200 N.m(37,173 inch-lb)•Optimum for harsh environments•Latest Design Technologies applied•Advanced Rack and Pinion Mechanism•Wear and Corrosion Resistance


Products & ServicesEP-Pneumatic Actuators, Quarter Turn EP-Pneumatic Actuators, Linear EH-Hydraulic Actuators, Quarter Turn

EPA Series : Heavy Duty Actuators

EPR Series : Compact Actuators EHA Series: Compact Heavy Duty Actuators

EHT-Series hydraulic scotch yokeactuators deliver the optimum outputfrom the linear movement of the piston.This is ideal for quarter-turn valve applications. The EHT actuatoris smaller than other actuators offering similar torque outputs,which reduces the overall valve package envelop, allowing for amore compact design.

•Reliable and Safe Heavy Duty Design•Torque range 468 N.m(4,142inch-lb) up to 268,486 N.m (2,376,302inch-lb)•Symmetric and Canted Scotch Yoke Mechanism•Wear and Corrosion Resistance•High levels of static and dynamic sealing•Suitable for severe aplications

EHT Series : Heavy Duty Actuators

The self-contained Electro-Hydraulic actuatorsconsist of control, hydraulic, and power modulesincorporating a motor driven pump with a hydraulic cylinder.These actuators offer complete tailor-made solutions to a client’sapplication needs such as emergency shutdown (ESD), on-offmodulating control, and partial stroking tests with minimal effecton the process.

•A Complete Tailor-made solution •Versatility-Contorl, Hydraulic, Power Modules•Various Power - Single phase, three phase or 24VDC•Wear and Corrosion Resistance•Bus Commuications •Suitable for severe aplications

Electro Hydraulic Actuators EPAR Series : Compact Heavy Duty Actuators

Flowbus’ EPL-Series linearactuators provide advantages ofcompact and high performanceoutputs in flow control systems.With a range of operatingperformance, Flowbus linearactuators offer reliability andlong life, and have hightechnical performances. Our proven design and engineeringexpertise has developed a product suitable for the sever industry.

•Relaible and Compact Linear Actuators•Thrust range 50 N(11 lbf) to 950,000 N(231,407 lbf)•Suitable for harsh environments•Double Acting and Spring Return•Latest Design Technologies applied •Corrosion Protection

EPL Series : Linear Actuators

The rack & pinion EHA hydraulic actuators offer the most reliableand compact solutions under the harsh environments. Flowbus isable to make the EHA a high quality, reliable actuator, utilizingtried and tested methods of operation combined with the latestinnovations in technology. A low friction, corrosion resistanceinternal coating is applied to ensure perfect operation of theinternal components while the heavy duty construction and externalcoating protect the actuators from corrosive environments.

•Reliable and compact hydraulic actuators•Torque range 12 N.m(52,016 inch-lb) to 4,200 N.m(37,173 inch-lb)•Optimum for harsh environments•Latest Design Technologies applied •Advanced Rack and Pinion Mechanism•Wear and Corrosion Resistance

EPT-Series heavy-duty scotch yokeactuators are designed for rotary on-off or

modulating duty, and can be provided with eithersymmetrical or canted torque output to suit the duty requirements ofthe valve. They have been certified to meet SIL 3, 4 ratings inaccordance with IEC 61508/61511, which will support plantoperations under safety instrumentation systems.

•Reliable Heavy Duty Design•Torque range 398 N.m(3,682inch-lb) to 800,000 N.m (7,088,000 inch-lb)•Symmetric and Canted Scotch Yoke Mechanism•External Tie Rods for protection the cylinder tube•Wear and Corrosion Resistance •Advanced Sealing Compounds •Suitable for severe aplications

EPT Series : Heavy Duty Actuators

The compact FB declutchable gear override provides efficient, preciseperformance for quarter-turn manual override duties. The gearbox isspecially designed to offer quick and simple operation of the highesttorque valves when the air or power supply fails. High precision, self-locking gears provides safe, positive manual positioning and extendgearbox life.

•Efficient performance for manual operation duties•Torque range 225 N.m to 9,700 N.m •Safe and Simple Operation•High precision, self-locking gear design •Wear and Corrosion Resistance

Mounting Kits and Coupling


Through the installation of various fire protection systems, criticalvalve actuation systems can be efficiently protected from danger anddamage from fire. Flowbus is able to offer fire proofing systems forboth new and existing actuators and controls systems in accordancewith UL 1709.

Flowbus mounting kits and couplings can be designed andmanufactured for valves and actuators in accordance with ISO 5211or to meet specific customer requirements.

Flowbus can meet customer’s requirement for achieving a very shorttime in emergency operation of valves with using our own technologysuch as damper valve and FQV service valve. We can provide twoseries of quarter turn quick operating actuators; Hydraulic andpneumatic quick acting actuator. Depending on customerrequirements and process conditions, various ancillaries such as limitswitches, solenoid valve, poppet solenoid valves and so on areoptimally selected to ensure the perfect valve operation.

Various manual overrides such as jackscrew, gear and hydraulicoverride can be incorporated in accordance with customer'srequirements. The specially designed hydraulic override cylinderis installed inside the spring module; this standardizes actuatoroverall length and isolates the hydraulic fluid to eliminatecontamination and spillage.

Flowbus has been successfullybuilding a good reputation inthe valve automation industryby sharing our extensiveknowledge of valves andactuators. We providesignificant value addedadvantages to meet customerrequirements and offer singlesource responsibility for all of

the valve automation systems that we design, build, test, anddispatch. Our experienced engineers take efficiency, reliability,and cost reduction seriously with the goal of suiting ourcustomer’s specifications, while they provide automation using

various ancillaries such as solenoid valves, position and limitswitches, brackets, and other accessories. From simple on-offduties to complete modulating packages, Flowbus can supply theideal automation package to suit almost any duty or customerrequirement.

•Emergency Shutdonwn(ESD) •High Integrity Pressure Protection Systems(HIPPS)•Partial Stroke Test (PST) according to IEC61508•Fire Protection to UL1709•Pneumatic / Hydraulic Control Panels •Local Control Panels •Quick Operation •Lockup Function •Fieldbus Modulating Duties

Various Products & Services

Quick Operation Actuators FB-Series : Declutchable Gear Override Valve Automation Packages

Various Manual Overrides

Fire Proofing Solutions

Various Products & Services

R-type, RY-typeEPR-SeriesActuators for Quarter-Turn Valves

The EPR-Series

pneumatic actuator provides a rugged

solution for quarter-turn actuation while

reducing maintenance requirements.

The EPR-Series is a high quality, reliable

and economical actuator, utilizing tried

and tested methods of operation combined

with Flowbus’s technical know-how and

experience with global valve actuators.

Introduction>>

Reliable SolutionsFlowbus offers comprehensive solutions with the latest innovations in technology forproject specific customer requirements. By combining our high quality product range,expertise and process experience, we are able to solve complicated process problemswith reliable, on-time packages. Our aim is to exceed the quality and operationalexpectations of our customers, providing them with added value and service.

International Standards All EPR-Series actuators comply with the latest ISO5211 valve interface standards,for optimum strength, standardized dimensions and direct mounting, and theNAMUR international interface standards to enable efficient and accurate assemblyof automated packages.

Wide Range of Torque OutputsThe EPR double acting actuator has torque outputs from 11.5 to 5877 N.m (99 to52003 ins.lbs.), while the spring return actuator produces spring end torques from 4.4to 1197 N.m (38.6 to 10597 ins.lbs.). The actuators are rated for continuous operationat pneumatic supply pressures from 2 to 8 bar (40 to 100 psig). 10 bar (145 psig) isoptionally available

High Quality, Cost Effective ActuatorBy incorporating engineering excellence, and the latest precision manufacturingtechniques, the EPR actuator is constructed to the highest quality standards and offersefficient, reliable performance in a cost effective package. The corrosion resistant, hardanodized treatment on both internal and external surfaces combined with permanentlylubricated, replaceable bearings and guide plates ensures reliable operation andextended actuator life. To reduce installation space and increase flexibility, thehousing length is identical for both spring return and double acting actuators.

Various DesignsEPR actuators are available with both rack and pinion and scotch yoke mechanismswith both designs incorporating an aluminium body with an advanced hard anodizedexterior protection. They are compact and light weight actuators whose designproduces a significant saving in the use of compressed air with less stroke volume.

R-type>>

01_Hard Anodized BodyThe extruded aluminum body incorporates an advanced, hard anodizing treatment on theinternal and external surfaces. This provides reduced friction, increased durability andcorrosion protection. The body can also be provided in a number of optional finishes includingPTFE coated, electroless nickel plated and a variety of polyester powder coated colors.

02_Large Piston DesignR-type actuators are designed with an optimally sized piston rack. This minimizes backlashbetween the rack and pinion ensuring that they are precisely engaged. This featureguarantees excellent power delivery and accurate valve modulation.

03_Advanced Rack and Pinion DesignA compact, rugged construction, with dual rack andpinion, guarantees stable torque output throughout theactuator’s travel. The design is also suitable for high-cycle, high-speed duties.

04_Travel AdjustmentR-type actuators provide two external travel stopsallowing for 5 adjustment in both open and closedpositions. This allows accurate valve alignment andprovides actuator travel adjustment from 80 to 100 .Optional bolts fitted to the end caps can provideadditional travel adjustment, for the open position. Theexternally adjusted bolts can provide open positiontravel from 0 to 100 .

05_Piston Guide PlateA permanently lubricated, replaceable guide plate is fitted to the piston rack toalosorb lateral defiection and ensure smooth operation by eliminating metal tometal contact, improving wear resistance and increasing efficiency.

06_Drive Shaft BearingsR-type actuators have self-lubricating, replaceable shaft bearings providing low-friction, andhigh cycle life and reliable performance.

Advantages

04 _ EPR-Series

10_ISO 5211 Valve InterfaceThe R-type actuator has valve mounting pads in accordance withISO5211 standard, providing standardized mounting for ISOcompatible quarter-turn valves.

11_Visual Position IndicatorR-type actuators are supplied as standard with a visual positionindicator.

12_Simple to ConvertConverting from double acting to spring return configuration issimple and performed by removing the end caps and adding theunique spring cartridges. Actuator rotation is field reversible bysimply removing, rotating by 180 and re-installing the pistons.

05Actuators for Quarter -Turn Valves _

07_Corrosion ProtectionPolyester powder coated end caps provide excellent anti-corrosionproperties, and optional finishes are available, including PTFEcoating, electroless nickel plating or hard anodizing.

08_Blow-Out Proof Drive ShaftThe pinion is fitted with an octagon shaped anti-blow out devicecombined with an oxy-nitriding plated blowout proof bearing, toprovide safe, high cycle life. An electroless nickel is optionallyavailable according to customer’s requirement.

09_NAMUR Standard InterfacesFor ancillary equipment such as positioners and switchboxes, thelatest VID/VDE 3845 mounting interface is provided to allow quick andsimple mounting with direct pinion drive. A NAMUR solenoid mountingpad allows direct mounting of solenoid valves to the actuator.

06 _ EPR-Series

Actuator Operation

Double Acting ConfigurationAs standard the actuator is supplied for counterclockwise rotation whenpressure is applied to port A. This pressurizes the internal chamberdriving the pistons apart. When air is applied to port B the end chambersare pressurized driving the pistons together causing clockwise actuatorrotation. If required, the pistons can be inverted in the housing resultingin clockwise rotation when pressure is applied to port A.

Spring Return ConfigurationAs standard the actuator is supplied for clockwise rotation in airfailure mode. When port A is vented the springs drive the pistonstogether, causing clockwise rotation. When pressure is applied to portA the internal chamber is pressurized driving the pistons apart andcompressing the springs, causing anti-clockwise actuator rotation.Port B is used as a breather for the spring chamber swept volume.

Torque Outputs

Double ActingThe R-type actuator is designed such that torque is independent ofactuator travel and is constant throughout the travel range.

Spring ReturnSpring return actuators have both spring and air torques and eachtorque has a higher start figure than the end figure. Then R-typeactuator is designed such that the spring and air start torques areequal, as are the spring and air end torques.

Double Acting Actuators

CLOSE(0 )

% OF, Torque

OPEN(90 )

100

0

Spring Return Actuators

CLOSE(0 )

% OF, Torque

OPEN(90 )

100

0

Specifications

Description Q.ty Standard Material Description Q.ty Standard MaterialNO NO

Outer Indicator 1 Engineering Plastics

Cap Screw 1 Stainless Steel

Inner Indicator 1 Engineering Plastics

Snap Ring 1 Spring Steel, Nickel Plated

Plan Washer A 1 Stainless Steel

Plan Washer B 1 Engineering Plastics

Housing 1 Extruded Aluminum Alloy, Hard Anodized

Top O-Ring 1 NBR

Top Bearing 1 Engineering Plastics

Spacer Washer 1 Engineering Plastics

Travel Cam 1 Alloy Steel, Nickel Plated

Drive Shaft 1 Alloy Steel, Nitrding

Bottom Bearing 1 Engineering Plastics

Bottom O-Ring 1 NBR

Hole Sealant 2 NBR


Extended View

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

Adjust O-Ring 2 NBR

Adjust Plan Washer 2 Stainless Steel

Adjust Nut 2 Stainless Steel

Adjust Bolt 2 Stainless Steel

Piston 2 Die Cast Aluminum, Anodized

Guide Plate 2 Engineering Plastics

Piston O-Ring 2 NBR

Piston Bearing 2 Engineering Plastics

Spring Assembly 6~12 Spring Steel, Dip Coating

End Cover O-Ring 2 NBR

End Cover 2 Die Cast Aluminum, Powder Polyester Coated

End Cover Bolt 8 Stainless Steel

Stop Bolt 2 Stainless Steel

Stop Nut 2 Stainless Steel

RY-type>>

01_Scotch Yoke MechanismThe RY-type pneumatic actuator features a modern scotch yoke mechanismthat provides high start and end torque output in a very compact package. It isavailable in both double-acting and spring-return configurations.

02_Travel AdjustmentRY-type actuators provide two external travel stops allowing for 4adjustment in both open and closed positions. This allows accurate valvealignment and provides actuator travel adjustment from 82 to 98 . Optionalbolts fitted to the end caps can provide additional travel adjustment, for theopen position. The externally adjusted bolts can provide open position travelfrom 0 to 98 .

03_Corrosion ProtectionPolyester powder coated end caps provide excellent anti-corrosion properties, and optional finishes are availableif required, including PTFE coating, electroless nickelplating or hard anodizing.

04_Wide Range of Torque OutputsIn order to provide the widest possible range of torqueoutputs, Flowbus have designed the EPRY actuator rangewith either a single piston or dual piston layout.Each actuator size is available in both single and dualpiston, with the single piston design fitting just belowthe dual piston in the torque output table.

05_Hard Anodized BodyThe extruded aluminum body incorporates an advanced, hard anodizingtreatment on the internal and external surfaces. This provides reduced friction,increased durability and corrosion protection. The body can also be provided ina number of optional finishes including PTFE coated, electroless nickel platedand a variety of polyester powder coated colors.

Advantages

08 _ EPR-Series


09_Spring Cartridge SafeThe RY-type actuator has been designed with an inherently safespring return unit. The actuator spring rod is connected to both thespring end cover and retainers so that the spring is fully retainedduring assembly or disassembly. This prevents accidental release ofthe spring force, and ensures that installation or maintenance canbe performed in complete safety.

10_Various Manual OverridesThe jackscrew override is integrated in the end cap of the actuatorand can be fitted to all RY-type actuators units in both double-actingand spring-return configurations. This manual override is theoptimum solution for customers requiring a compact unit ofminimum weight and size.

06_NAMUR Standard InterfacesFor ancillary equipment such as positioners and switchboxes, thelatest VID/VDE 3845 mounting interface is provided to allow quickand simple mounting with direct pinion drive. A NAMUR solenoidmounting pad allows direct mounting of solenoid valves to theactuator.

07_ISO 5211 Valve InterfaceThe RY-type actuator has valve mounting pads in accordance withISO5211 standard, providing standardized mounting for ISOcompatible quarter-turn valves.

08_Visual Position IndicatorRY-type actuators are supplied as standard with a visual positionindicator.

10 _ EPR-Series

Actuator Operation

Double Acting ConfigurationAs standard the actuator is supplied for counterclockwise rotation whenpressure is applied to port A. This pressurizes the internal chamberdriving the pistons apart. When air is applied to port B the end chambersare pressurized driving the pistons together causing clockwise actuatorrotation. If required, the pistons can be inverted in the housing resultingin clockwise rotation when pressure is applied to port A.

Double Acting Configuration Spring Return Configuration

Spring Return ConfigurationAs standard the actuator is supplied for clockwise rotation in airfailure mode. When port A is vented the springs drive the pistonstogether, causing clockwise rotation. When pressure is applied to portA the internal chamber is pressurized driving the pistons apart andcompressing the springs, causing anti-clockwise actuator rotation.Port B is used as a breather for the spring chamber swept volume.

Torque Outputs

Specifications

Spring Return

Double Acting

A B

A B

A B

A B

Description Q.ty Standard MaterialNODescription Q.ty Standard MaterialNO

Outer Indicator 1 Engineering PlasticsCap Screw 1 Stainless Steel

Inner Indicator 1 Engineering PlasticsSnap Ring 1 Spring Steel, Nickel Plated

Plan Washer A 1 Stainless SteelPlan Washer B 1 Engineering Plastics

Housing 1 Extruded Aluminum Alloy, Hard AnodizedTop O-Ring 1 NBRTop Bearing 1 Engineering Plastics

Spacer Washer 1 Engineering PlasticsTravel Cam 1 Alloy Steel, Zin PlatedTop Guide 1 Engineering Plastics

Yoke 1 Alloy SteelYoke Pin 1 Alloy Steel, Nitrding

Snap Ring 1 Spring SteelBottom Guide 1 Engineering Plastics

Drive Shaft 1 Alloy Steel, NitrdingBottom Bearing 1 Engineering PlasticsBottom O-Ring 1 NBRHole Sealant 2 NBRAdjust O-Ring 2 NBR


Extended View

123456789101112131415161718192021

222324252627282930313233343536373839404142

Adjust Plan Washer 2 Stainless SteelAdjust Nut 2 Stainless SteelAdjust Bolt 2 Stainless Steel

Piston 2/1 Die Cast AluminumGuide Plate 2/1 Engineering Plastics

Piston Bearing 2/1 Engineering PlasticsPiston O-Ring 2/1 NBR

Roller Pin 2/1 Alloy Steel, NitrdingRoller Bearing 2/1 Alloy Steel, NitrdingPlan Washer C 4/2 Stainless Steel

Snap Ring 4/2 Spring SteelSpring Rod 2/1 Stainless Steel

Retainer 2/1 Die Cast AluminumSpring A 2/1 Spring SteelSpring B 0/1/2 Spring Steel

End Cover O-Ring 2 NBREnd Cover 2 Die Cast Aluminum, Powder Polyester Coated

End Cover Bolt 8 Stainless SteelSpring Rod O-Ring 2/1 NBRSpring Rod Washer 2/1 Stainless Steel

Spring Rod Nut 2/1 Stainless Steel

EPR-Series General Information>>

12 _ EPR-Series

Operational Data

MediaThe operating media should be clean instrument air or non-corrosivegas. The media can be lubricated or non-lubricated. It should have adew point of -20 C or at least 10 C below the ambient temperature,and a maximum particle size of 50 micron.

Supply PressureThe EPR-Series is rated for continuous operation at pneumaticsupply pressures from 2 to 8 bar (40 to 116 psig). 10 bar (145 psig) isoptionally available.

Temperature RangeStandard Range : -20 C to 80 C (-4 F to 176 F)Low Temperature (optional) : -40 C to 80 C (-40 F to 176 F)High Temperature (optional) : -10 C to 150 C (14 F to 302 F)

Torque OutputsThe EPR double acting torque output ranges from 11.5 to 5877 N.m(99 to 52003 ins.lbs.) and the spring return actuator produces springend torques from 4.4 to 1197 N.m (38.6 to 10597 ins.lbs.).

Construction Data

01_EPR-Series actuators are a rugged and compact design,available in both double acting and spring return configurations forquarter-turn valves.

02_The EPR-Series actuator combines a high precision, extrudedaluminum alloy body with a hard anodized surface finish forexcellent performance.

03_Die-cast aluminum end caps are polyester powder coated forimproved corrosion resistance.

04_The EPR-series has designed, allowing efficient, reliableperformance and long life.

05_All moving parts are fitted with permanently lubricated,replaceable bearings and guide plates to eliminate metal to metalcontact and minimize internal wear.

06_The EPR-Series incorporates the latest VDI/VDE 3845 mountinginterface and a visual position indicator as standard.

07_EPR-Series actuators are designed to offer excellent corrosionresistance in industrial and commercial applications.

08_The EPR-Series actuator is designed for low maintenance anddoes not require any special tools.


09_The EPR-Series actuator is available with a declutchablegearbox option. This allows quick and simple operation of thehighest torque valves when the air or power supply fails.

10_EPR-Series actuators are certified to IP66/IP67 protectionratings.

11_External travel stops provide 5 (rack & pinion mechanisim),4 (scoth yoke mechanisim) of travel adjustment in both directions

of pinion rotation. Optional bolts can be provided in the end caps forgreater adjustment.

12_Spring assemblies are designed for high torque and reliableperformance.

13_In case of rack & pinion mechanism, conversion from doubleacting to spring return configuration is simple and performed byremoving the end caps and adding the required spring cartridges.

14_The blow-out proof pinion provides safety andexceptional gear life.

15_The gear teeth of rack and pinion are preciselymanufactured to minimize back lash and offerexcellent performance for modulating applications.

16_RY-type actuators are designed with aninherently safe spring return unit to preventaccidental release of the spring forces.

17_Approvals and industry Standards- Manufactured in conformity with CE certification PED 97/23/EC- Certified in accordance with ATEX 94/9/EC- Designed and manufactured under a third party accredited

ISO9001:2000 quality assurance program

Ancillary Equipment

Declutchable GearboxThe EPR-Series actuator is available with a declutchable gear boxoption. This allows quick and simple operation of the highest torquevalves when the air or power supply fails.

Declutchable Side HandwheelThe declutchable side handwheel is integrated in the end cap of theactuator and can be fitted to the RY-type actuator units in bothdouble-acting and spring-return configurations.

Complete Actuator PackagesFrom simple on/off duties with switchboxes and solenoid valves tocomplete modulation packages with smart positioners or ESD partialstroke testing devices, Flowbus is able to supply an actuatorpackage to suit any duty or customer requirement.

Mounting Kits & CouplingMounting kits and couplings for EPR-Series actuators can bedesigned and manufactured by Flowbus in accordance with ISO5211 or specific customer requirements.

Technical Data>>

14 _ EPR-Series

Spring Return Actuators (Metric Unit)

EPR 052-SR

EPR 063-SR

(Unit : N.m)

6.7 4.4 6.7 4.3 8.6 6.1 10.4 7.87.9 5.1 6.0 3.2 7.9 5.0 9.7 6.8 11.5 8.59.0 5.8 5.3 2.1 7.2 3.9 9.0 5.7 10.8 7.5 12.7 9.310.1 6.5 8.3 4.6 10.1 6.4 12.0 8.2 13.8 10.011.2 7.3 9.4 5.3 11.2 7.1 13.1 8.9 14.9 10.712.4 8.0 10.5 6.1 12.4 7.8 14.2 9.6 17.9 13.213.5 8.7 11.7 6.8 13.5 8.5 17.2 12.112.5 7.2 12.3 7.0 15.5 10.1 18.8 13.214.5 8.4 11.1 5.0 14.4 8.1 17.6 11.3 20.8 14.416.6 9.6 9.9 3.0 13.2 6.2 16.4 9.3 19.6 12.4 22.9 15.618.7 10.9 15.2 7.3 18.5 10.4 21.7 13.6 24.9 16.720.8 12.1 17.3 8.5 20.5 11.6 23.7 15.2 27.0 17.922.8 13.3 19.3 9.6 22.6 12.8 25.8 15.9 32.3 22.224.9 14.5 21.4 10.8 24.6 13.9 31.1 20.220.7 11.9 20.4 11.4 25.8 16.6 31.1 21.824.1 13.8 18.5 8.2 23.9 13.3 29.2 18.5 34.5 23.727.6 15.8 16.6 4.9 21.9 10.1 27.3 15.3 32.6 20.4 37.9 25.631.0 17.8 25.3 12.0 30.7 17.2 36.0 22.3 41.4 27.534.5 19.8 28.7 13.9 34.1 19.1 39.4 24.2 44.8 29.437.9 21.8 32.1 15.8 37.5 21.0 42.8 26.2 53.5 36.541.4 23.7 35.5 17.7 40.9 22.9 51.6 33.226.2 16.7 28.5 18.2 36.0 25.3 43.5 32.430.6 19.5 25.8 14.2 33.3 21.3 40.7 28.4 48.2 35.534.9 22.3 23.0 10.1 30.5 17.2 38.0 24.3 45.5 31.4 53.0 38.539.3 25.1 35.3 20.2 42.8 27.3 50.2 34.4 57.7 41.543.7 27.9 40.0 23.3 47.5 30.4 55.0 37.5 62.5 44.648.1 30.7 44.8 26.3 52.3 33.4 59.7 40.5 74.7 54.752.4 33.4 49.5 29.4 57.0 36.5 72.0 50.739.7 23.3 39.2 22.5 49.5 32.5 59.9 42.546.3 27.2 35.4 16.2 45.7 26.2 56.1 36.2 66.4 46.352.9 31.1 31.6 9.9 41.9 19.9 52.2 30.0 62.6 40.0 72.9 50.059.5 35.0 48.4 23.7 58.8 33.7 69.1 43.7 79.5 53.866.1 38.9 55.0 27.4 65.3 37.5 75.7 47.5 86.0 57.572.7 42.8 61.5 31.2 71.8 41.2 82.2 51.2 102.9 71.379.3 46.7 68.0 34.9 78.4 44.9 99.1 65.054.8 30.9 59.6 33.2 74.5 46.9 89.5 60.763.9 36.0 54.5 25.0 69.5 38.7 84.5 52.5 99.4 66.273.0 41.1 49.5 16.7 64.5 30.5 79.4 44.2 94.4 58.0 109.4 71.782.2 46.3 74.4 36.0 89.4 49.8 104.3 63.5 119.3 77.391.3 51.4 84.3 41.5 99.3 55.3 114.3 69.0 129.2 82.8100.4 56.6 94.3 47.1 109.2 60.8 124.2 74.6 154.1 102.1109.6 61.7 104.2 52.6 119.2 66.3 149.1 93.8100.3 56.2 97.7 52.8 123.1 77.5 148.6 102.1117.0 65.5 88.5 36.9 114.0 61.6 139.4 86.3 164.9 110.9133.7 74.9 79.3 21.0 104.8 45.7 130.3 70.4 155.7 95.1 181.2 119.7150.5 84.3 121.1 54.5 146.5 79.2 172.0 103.9 197.4 128.5167.2 93.6 137.4 63.3 162.8 88.0 188.3 112.6 213.7 137.3183.9 103.0 153.6 72.1 179.1 96.8 204.6 121.4 255.5 170.8200.6 112.4 169.9 80.9 195.4 105.6 246.3 154.9153 90 152 87 192 126 231 164178 105 137 63 177 101 217 140 257 179204 120 122 39 162 77 202 116 242 155 282 193229 135 187 92 227 130 267 169 307 208255 150 213 106 253 145 293 184 332 222280 164 238 121 278 159 318 198 398 276306 179 263 135 303 174 383 251228 145 233 147 296 208 359 268266 169 210 111 272 171 335 232 398 293304 193 186 75 249 135 311 196 374 257 436 317343 217 288 160 350 220 413 281 475 342381 241 327 184 389 245 452 306 514 366419 265 366 209 428 269 491 330 616 451457 290 404 233 467 294 592 415389 223 373 207 472 305 571 403454 260 337 143 436 241 535 339 634 437519 297 300 80 399 178 498 276 597 374 696 472584 335 461 212 560 310 659 408 758 506649 372 523 247 622 345 721 443 820 541713 409 586 281 685 379 784 477 982 673778 446 648 316 747 414 945 610471 265 459 249 579 365 698 482549 309 416 175 535 291 655 407 775 523628 353 372 100 492 216 612 332 732 449 851 565706 397 569 258 688 374 808 490 928 606784 442 645 300 765 416 885 532 1004 648863 486 722 341 841 457 961 573 1201 805941 530 798 383 918 499 1157 731

67891011126789101112678910111267891011126789101112678910111267891011126789101112678910111267891011126789101112

Actuator

Model

Spring

Q'tyPosition of StrokeSpring Torque Pneumatic Stroke Torque (N.m) at Operating Pressure (bar)

EPR 075-SR

EPR 083-SR

EPR 092-SR

EPR 105-SR

EPR 125-SR

EPR 140-SR

EPR 160-SR

EPR 190-SR

EPR 210-SR

EndStart3

EndStart3.5

EndStart4

EndStart4.5

EndStart5

EndStart5.5

EndStart6

EndStart7

EndStart8

EndStart


Spring Return Actuators (Imperial Unit)

EPR 052-SR

EPR 063-SR

(Unit : inch.pounds)

6 59.7 38.6 58.8 36.9 107.1 83.7 7 69.6 45.0 52.5 27.5 100.8 74.3 112.9 86.0 8 79.6 51.4 46.2 18.0 94.5 64.8 106.6 76.6 118.6 88.3 9 89.5 57.9 88.2 55.4 100.3 67.1 112.3 78.8 136.5 102.2 10 99.5 64.3 94.0 57.7 106.0 69.4 130.2 92.8 154.3 116.2 11 109.4 70.7 99.7 59.9 123.9 83.3 148.0 106.7 172.2 130.1 12 119.4 77.1 117.6 73.9 141.7 97.3 165.9 120.7 6 110 64 107 60 192 143 7 129 75 97 43 182 125 203 146 8 147 85 86 25 171 108 193 128 214 149 9 165 96 161 90 182 111 204 131 246 173 10 184 107 172 93 193 114 236 155 278 196 11 202 117 183 96 225 138 268 179 310 220 12 221 128 215 120 257 161 300 203 6 183 105 178 99 319 235 7 214 123 161 70 302 206 337 240 8 244 140 144 41 285 177 320 211 355 245 9 275 158 267 148 303 182 338 216 408 284 10 305 175 285 153 321 187 391 255 461 324 11 336 193 303 158 374 226 444 295 514 363 12 366 210 357 197 427 266 497 334 6 232 148 249 161 446 352 7 271 173 224 125 421 315 471 363 8 309 197 200 88 397 279 446 326 496 374 9 348 222 373 242 422 290 471 337 570 433 10 387 247 398 253 447 301 546 396 644 491 11 425 271 423 264 522 359 620 455 718 550 12 464 296 497 323 596 418 694 513 6 351 207 342 194 614 458 7 410 241 308 138 580 402 648 468 8 468 275 274 83 546 347 614 413 682 478 9 527 310 513 291 581 357 649 423 785 555 10 585 344 547 301 615 367 751 499 887 631 11 644 379 581 312 717 444 853 575 989 707 12 702 413 684 388 820 520 956 652 6 485 273 520 303 914 685 7 566 319 475 226 869 608 968 703 8 647 364 431 149 825 531 923 626 1021 722 9 727 410 780 454 878 550 977 645 1174 836 10 808 455 834 473 932 568 1129 759 1326 950 11 889 501 861 492 1085 682 1281 873 1478 1064 12 970 546 1040 606 1237 797 1434 987 6 888 497 852 455 1522 1104 7 1036 580 771 315 1441 964 1608 1126 8 1184 663 690 174 1359 823 1527 986 1694 1148 9 1332 746 1278 683 1446 845 1613 1007 1948 1332 10 1480 829 1365 704 1532 867 1867 1191 2202 1516 11 1628 912 1451 726 1786 1051 2120 1375 2455 1700 12 1776 994 1704 910 2039 1235 2374 1559 6 1353 794 1322 751 2372 1769 7 1578 926 1192 537 2243 1555 2505 1809 8 1803 1059 1063 323 2113 1341 2375 1595 2638 1850 9 2029 1191 1983 1127 2246 1381 2508 1636 3033 2145 10 2254 1323 2116 1167 2379 1421 2904 1930 3429 2439 11 2480 1456 2249 1207 2774 1716 3299 2225 3824 2734 12 2705 1588 2644 1502 3169 2011 3694 2520 6 2021 1282 2036 1271 3682 2867 7 2358 1495 1827 951 3473 2547 3884 2946 8 2695 1709 1617 631 3263 2227 3675 2626 4086 3025 9 3031 1922 3054 1907 3466 2306 3877 2705 4700 3502 10 3368 2136 3256 1986 3668 2385 4491 3182 5314 3980 11 3705 2349 3458 2065 4281 2862 5104 3660 5927 4458 12 4042 2563 4072 2542 4895 3340 5718 4138 6 3444 1974 3224 1728 5802 4228 7 4018 2303 2901 1183 5480 3683 6125 4308 8 4592 2632 2579 638 5158 3138 5802 3763 6447 4388 9 5166 2961 4835 2593 5480 3218 6125 3842 7414 5092 10 5740 3290 5158 2672 5802 3297 7092 4547 8381 5797 11 6314 3619 5480 2752 6769 4002 8059 5252 9348 6502 12 6888 3948 6447 3457 7737 4707 9026 5957 6 4166 2345 4003 2150 7154 5204 7 4860 2735 3620 1491 6771 4545 7558 5308 8 5555 3126 3237 831 6388 3885 7175 4649 7963 5412 9 6249 3517 6005 3226 6792 3989 7580 4753 9155 6280 10 6943 3908 6409 3330 7197 4093 8772 5620 10347 7147 11 7637 4299 6814 3433 8389 4960 9964 6487 11540 8014 12 8332 4689 8006 4301 9581 5828 11157 7355

Actuator ModelSpring

Q'TYPosition of Stroke

Spring Torque Pneumatic Stroke Torque (in.lb) at Operating Pressure (psig)

EPR 075-SR

EPR 083-SR

EPR 092-SR

EPR 105-SR

EPR 125-SR

EPR 140-SR

EPR 160-SR

EPR 190-SR

EPR 210-SR

EndStart40

EndStart60

EndStart65

EndStart70

EndStart80

EndStart90

EndStart100

EndStart

Imperial Unit (Cu.in)

40 60 65 70 80 90 100 116

Actuator ModelPneumatic Stroke Torque (N.m) at Operating Pressure (bar)

3 3.5 4 4.5 5 5.5 6 7 8

Technical Data>>

16 _ EPR-Series

Double Acting Actuators (Metric Unit)

EPR 052-DAEPR 063-DA

(Unit : N.m)

EPR 075-DAEPR 083-DAEPR 092-DAEPR 105-DAEPR 125-DAEPR 140-DAEPR 160-DAEPR 190-DAEPR 210-DA

11.5 13.4 15.3 17.2 19.1 21.1 23.0 26.8 30.620.2 23.6 27.0 30.4 33.7 37.1 40.5 47.2 54.033.5 39.0 44.6 50.2 55.8 61.3 66.9 78.1 89.247.3 55.2 63.1 71.0 78.9 86.8 94.7 110.5 126.264.7 75.5 86.3 97.1 107.9 118.7 129.5 151.0 172.695 110 126 142 158 174 189 221 253163 190 217 244 271 298 326 380 434255 298 340 383 425 468 511 596 681404 472 539 606 674 741 809 943 1078647 755 862 970 1078 1186 1294 1509 1725790 922 1054 1185 1317 1449 1580 1844 2107

Actuator ModelPneumatic Stroke Torque (in.lb) at Operating Pressure (psig)

Double Acting Actuators (Imperial Unit)

EPR 052-DAEPR 063-DA

(Unit : inch.pounds)

EPR 075-DAEPR 083-DAEPR 092-DAEPR 105-DAEPR 125-DAEPR 140-DAEPR 160-DAEPR 190-DAEPR 210-DA

99 148 160 172 197 222 246 286 174 260 282 304 347 391 434 503 287 431 466 502 574 646 718 832 402 603 653 703 803 904 1004 1165 555 833 902 972 1111 1249 1388 1610 804 1206 1306 1406 1607 1808 2009 2331 1367 2050 2221 2392 2734 3075 3417 3964 2143 3215 3483 3751 4286 4822 5358 6215 3359 5039 5458 5878 6718 7558 8398 9741 5263 7895 8553 9210 10526 11842 13158 15263 6429 9644 10448 11252 12859 14466 16074 18645

Opening Closing Opening ClosingActuator Model

Metric Unit ( )

Air Consumption (Air Volume Opening & Closing)

EPR 052EPR 063EPR 075EPR 083EPR 092EPR 105EPR 125EPR 140EPR 160EPR 190EPR 210

0.12 0.16 7.3 9.8 0.2 0.26 12.2 15.9 0.33 0.42 20.1 25.6 0.47 0.62 28.7 37.8 0.64 0.86 39.1 52.5 0.93 1.24 56.8 75.7 1.6 2.06 97.6 125.7 2.42 3.34 147.7 203.8 3.9 5.1 238.0 311.2 6.1 8.1 372.2 494.3 7.4 10.3 451.6 628.5

Air Consumption depends on Air Supply, Air volume and Action cycle times, the calculating as follows : /Min = Air volume (Air volume Opening + Air volume closing) [00000000000000000000000] Action cycle times (/ Min)Air Supply (Kpa) + 101.3

101.3

Imperial Unit (pounds)Double Acting Spring Return Double Acting Spring Return

Actuator ModelMetric Unit (kg)

Weights Table


1.4 1.5 3.1 3.3 2.2 2.5 4.9 5.5 3 3.4 6.6 7.5

3.8 4.3 8.4 9.5 5.2 6 11.5 13.2 6.7 8 14.8 17.6 10.4 12.3 22.9 27.1 15.6 18.6 34.4 41.0 22.7 27.2 50.0 60.0 35.3 42.7 77.8 94.1 44.8 55.0 98.8 121.3

Operating TimeActuator Model

EPR 160EPR 190

Closing TimeOpening TimeDouble Acting Spring Return

EPR 125EPR 140

EPR 210

Double Acting Spring Return

Imperial Unit (inches)ActuatorModel

S T U V(ISO228) ZPA B C D E F G H I J K L M N O RQ

Actuator Model

EPR 075EPR 083

Closing TimeOpening TimeDouble Acting Spring Return

EPR 052EPR 063

EPR 092EPR 105


(Unit : sec)

Dimensions

Double Acting Spring Return0.07 0.11 0.10 0.190.13 0.18 0.17 0.320.21 31 0.31 0.510.30 0.44 0.40 0.730.4 0.6 0.6 0.80.6 0.9 0.8 1.2

1.1 1.5 1.2 2.01.6 2.1 1.8 2.12.4 3.5 2.8 3.03.8 6.1 4.5 4.74.6 6.6 5.6 6.5

The above indicated moving time of the actuator, are obtained in the following test conditions : 1.flow capacity Qn=800 Liter/min 2.solenoid valve with orifice of 5.7mm 3.inside pipe diameter 8mm 4.Air supply pressure 5.5bar (79.75psi) 5.Medium clean air 6.Temperature :ATM 7.Actuator without external resistance load.Cautions :obviously on the field applications when one or more of the above parameter are different, the moving time will be different

Metric Unit (mm)ActuatorModel


30 80 41.5 29.5 71 73 25.6 98.6 37 20 22 12 12 36 5030 80 47 35.5 82.5 88 25.6 113.6 37 20 26 12 12 50 7030 80 53 42 95 100.5 25.6 126.1 37 20 30 12 12 50 7030 80 57 46.5 103.5 109 25.6 134.6 37 20 30 12 12 50 7030 80 61 51 112 119.5 25.5 145.0 42 20 35 16 12 70 10230 80 66 57.5 123.5 135 25.5 160.5 42 20 35 16 12 70 10230 80 74 68 142 157.5 25.8 183.3 65 20 48 22 12 70 10230 80 81 75.5 156.5 175 25.8 200.8 65 20 53 22 12 102 12530 80 87 87 174 198 25.8 223.8 65 20 58 22 12 102 12530 130 103 103 206 234 35.8 269.8 83 30 64 32 18 12530 130 113 113 226 259 35.8 294.8 83 30 74 32 18 140

M6 10 11 14 24 32 1/4"NPT 150M6 10 M8 13 14 16 24 32 1/4"NPT 177.4M6 10 M8 13 14 17 24 32 1/4"NPT 200M6 10 M8 13 17 21 24 32 1/4"NPT 234.2M8 13 M10 16 17 21 24 32 1/4"NPT 262M8 13 M10 16 22 26 24 32 1/4"NPT 286.2M8 13 M10 16 22 26 24 32 1/4"NPT 336M10 16 M12 20 27 31 24 32 1/4"NPT 417.4M10 16 M12 20 27 31 24 32 1/4"NPT 494.2M12 20 36 40 24 32 1/4"NPT 547.2M16 25 36 40 24 32 1/4"NPT 566.6

S T U V(ISO228) ZPA B C D E F G H I J K L M N O RQEPR 052EPR 063EPR 075EPR 083EPR 092EPR 105EPR 125EPR 140EPR 160EPR 190EPR 210

1.18 3.15 1.63 1.16 2.80 2.87 1.01 3.88 1.46 0.79 0.87 0.47 0.47 1.42 1.97 1.18 3.15 1.85 1.40 3.25 3.46 1.01 4.47 1.46 0.79 1.02 0.47 0.47 1.97 2.76 1.18 3.15 2.09 1.65 3.74 3.96 1.01 4.96 1.46 0.79 1.18 0.47 0.47 1.97 2.76 1.18 3.15 2.24 1.83 4.07 4.29 1.01 5.30 1.46 0.79 1.18 0.47 0.47 1.97 2.76 1.18 3.15 2.40 2.01 4.41 4.70 1.00 5.71 1.65 0.79 1.38 0.63 0.47 2.76 4.02 1.18 3.15 2.60 2.26 4.86 5.31 1.00 6.32 1.65 0.79 1.38 0.63 0.47 2.76 4.02 1.18 3.15 2.91 2.68 5.59 6.20 1.02 7.22 2.56 0.79 1.89 0.87 0.47 2.76 4.02 1.18 3.15 3.19 2.97 6.16 6.89 1.02 7.91 2.56 0.79 2.09 0.87 0.47 4.02 4.92 1.18 3.15 3.43 3.43 6.85 7.80 1.02 8.81 2.56 0.79 2.28 0.87 0.47 4.02 4.92 1.18 5.12 4.06 4.06 8.11 9.21 1.41 10.62 3.27 1.18 2.52 1.26 0.71 4.92 1.18 5.12 4.45 4.45 8.90 10.20 1.41 11.61 3.27 1.18 2.91 1.26 0.71 5.51

M6 10 0.433 0.55 0.945 1.26 1/4"NPT 5.91 M6 10 M8 13 0.551 0.63 0.945 1.26 1/4"NPT 6.98 M6 10 M8 13 0.551 0.67 0.945 1.26 1/4"NPT 7.87 M6 10 M8 13 0.669 0.83 0.945 1.26 1/4"NPT 9.22 M8 13 M10 16 0.669 0.83 0.945 1.26 1/4"NPT 10.31 M8 13 M10 16 0.866 1.02 0.945 1.26 1/4"NPT 11.27 M8 13 M10 16 0.866 1.02 0.945 1.26 1/4"NPT 13.23 M10 16 M12 20 1.063 1.22 0.945 1.26 1/4"NPT 16.43 M10 16 M12 20 1.063 1.22 0.945 1.26 1/4"NPT 19.46 M12 20 1.417 1.57 0.945 1.26 1/4"NPT 21.54 M16 25 1.417 1.57 0.945 1.26 1/4"NPT 22.31

EPRY160-DA

EPRY190-DA

EPRY210-DA

EPRY160E-DA

EPRY190E-DA

EPRY210E-DA

765.554.543Spring Torque

Position of stroqueActuator Model

Pneuamtic Stroke Torque (N.m) at Operating Pressure (bar)Position of stroque

EPRY190E-S1

EPRY160E-S1

EPRY160-S1

EPRY210-S1

EPRY190-S1

EPRY210E-S1

EPRY160-S2

EPRY190E-S2

Technical Data>>

18 _ EPR-Series

Start 483 643 724 804 885 965 1126 1287 Run 212 282 318 353 388 424 494 565

Break 351 468 527 585 644 702 819 936 Start 965 1287 1448 1609 1769 1930 2252 2574 Run 424 565 635 706 777 847 988 1129

Break 702 936 1053 1170 1287 1404 1638 1872 Start 815 1087 1223 1358 1494 1630 1902 2173 Run 362 483 543 604 664 724 845 966

Break 593 791 889 988 1087 1186 1383 1581 Start 1630 2173 2445 2717 2988 3260 3803 4347 Run 724 966 1087 1207 1328 1449 1690 1932

Break 1186 1581 1779 1976 2174 2372 2767 3162 Start 1102 1469 1653 1837 2020 2204 2571 2939 Run 490 653 735 816 898 979 1143 1306

Break 802 1069 1202 1336 1470 1603 1871 2138 Start 2204 2939 3306 3673 4041 4408 5142 5877 Run 979 1306 1469 1632 1795 1959 2285 2612

Break 1603 2138 2405 2672 2939 3207 3741 4276

Actuator ModelPneumatic Stroke Torque (N.m) at Operating Pressure (bar)Position of

stroke 3.0 4.0 4.5 5.0 5.5 6.0 7.0 8.0

Double Acting Output Torque (N.m) (Unit : N.m)

StartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

BreakStartRun

Break

305 461 539 617 695 773 88 151 182 214 245 277 93 204 260 316 372 427

391 469 548 626 704 860 109 140 171 203 234 297 101 157 213 269 325 436

609 922 1078 1234 1390 1546 177 302 365 428 490 553 185 408 520 631 743 855

783 939 1095 1251 1407 1720 217 280 343 406 468 594 203 314 426 538 649 872

513 777 909 1041 1173 1305 151 259 313 367 421 475 154 342 437 531 625 719

653 784 916 1048 1180 1444 181 235 289 343 397 505 158 252 346 440 535 723

1027 1554 1818 2082 2346 2609 302 518 626 734 842 950 308 685 873 1061 1250 1438

1305 1569 1833 2097 2360 2888 363 471 579 687 795 1011 316 504 693 881 1069 1446

699 1056 1234 1413 1591 1769 201 345 417 489 561 633 214 469 596 724 851 978

894 1072 1250 1429 1607 1964 244 316 388 460 532 676 228 355 483 610 738 992

1399 2112 2469 2825 3182 3538 402 690 834 978 1122 1266 428 938 1193 1447 1702 1957

1787 2144 2501 2857 3214 3927 488 632 776 920 1064 1352 456 711 966 1220 1475 1985

BreakRunEnd

BreakRunEnd

BreakRunEnd

BreakRunEnd

BreakRun End

BreakRunEnd

BreakRunEnd

BreakRunEnd

BreakRunEnd

BreakRunEnd

BreakRun End

BreakRunEnd

260 125 184 371 178 262 520 250 368 741 356 524 442 216 312 641 313 452 884 432 624

1281 626 904 591 289 416 850 415 599

1183 578 833

1701 831

1197

Spring Return Output Torque (N.m) (Unit : N.m)

EPRY160E-S2

EPRY210E-S2

EPRY210-S2

EPRY190-S2

Imperial unit can be provided if required. Contact our sales division at [email protected]

5.1 3.25.8 6.48.5 5.29.1 10.310.6 7.210.8 14.3

EPRY190EEPRY190

EPRY210EEPRY210

EPRY160EEPRY160

Closing


(Unit : mm)

Actuator Model Opening

Air Consumption (Air volume opening & closing)

Air Consumption depends on Air Supply, Air volume and Action cycle times, the calculating as follows: /Min = Air volume (Air volume Opening + Air volume closing) [00000000000000000000000] Action cycle times (/ Min)

Imperial unit can be provided if required. Contact our sales division at [email protected]

Air Supply (Kpa) + 101.3101.3

Dimensions

(Unit : )

22.5 30.128 43.2

35.2 50.143.8 7448.2 68.659.7 100.8

EPRY190EEPRY190

EPRY210EEPRY210

EPRY160EEPRY160

Spring ReturnActuator Model Double Acting

Weight Table (Unit :kg)

30 130 87 87 174 198 35.8 233.8 83 30 55 32 18 12530 130 87 87 174 198 35.8 233.8 83 30 55 32 18 12530 130 103 103 206 234 35.8 269.8 83 30 64 32 18 14030 130 103 103 206 234 35.8 269.8 83 30 64 32 18 14030 130 113 113 226 259 35.8 294.8 83 30 64 32 18 14030 130 113 113 226 259 35.8 294.8 83 30 64 32 18 165

M12 20 36 40 24 32 1/4"NPT 188.1 298.1 486.2 188.1 404.6 592.7M12 20 36 40 24 32 1/4"NPT 298.1 298.1 596.2 404.6 404.6 809.2M16 25 36 40 24 32 1/4"NPT 210.6 340.6 551.2 210.6 477.6 688.2M16 25 36 40 24 32 1/4"NPT 340.6 340.6 681.2 477.6 477.6 955.2M20 30 46 51 24 32 1/4"NPT 227.8 374.8 602.6 227.8 526.3 754.1M20 30 46 51 24 32 1/4"NPT 374.8 374.8 749.6 526.3 526.3 1052.6

A B C D E F G H I J K L M N O P Q R S T U/U1 V W X/X1 Y ZEPRY160EEPRY160

EPRY190EEPRY190

EPRY210EEPRY210

Actuator Model

EP-SeriesActuators for

Quarter-Turn Valves

T-type

SIL Applicable

Advantages

2 Advanced Sealing Compounds The T-type actuator utilizes both PTFE and rubber seals. ThePTFE seal offers a high level of sealing performance and is selflubricating, ensuring smooth operation of moving parts. Therubber seal offers long term, high performance sealing with notendency to set or creep.

3 Spring Rod NutThe spring rod nut locks the spring to prevent accidental release underrepetitive spring impacts.

1 Piston Guide RingThe T-type actuator has a guide ring fitted to the piston toprevent lateral deflection, ensure smooth, steady operation andextend piston life.

02

7 External Tie RodsThe external tie rods protect the cylinder tube from accidental damageduring piping work and prevent deformation.

8 High Efficiency The T-type piston rod is locked by a guide block, supported by a highstrength alloy steel guide rod with a self-lubricating bearing. Thisensures efficient operation and improves the transfer of energy fromthe actuator to the valve stem.

9 Wear ResistanceThe T-type actuator guide rod has an advanced surface treatment,which, combined with self-lubricating bearings, provides superiorwear resistance and extends the life of all sliding components.

10 Corrosion ResistanceT-type actuators incorporate four stages of internal and externalcorrosion resistant coating to resist severe weather, chemical andpetroleum environments.

11 Safe Spring ModuleTo ensure the safety of personnel during installation andmaintenance, and prevent accidental release of the spring force, thespring module has been designed so that it can only be removed fromthe power module with the spring in the fully extended position.

12 Simple AssemblySpecially designed dowel pins in the main actuator drive moduleensure simple and accurate alignment of modules when assemblingthe actuator or performing maintenance.

4 Simple Actuator MountingThe T-type actuator yoke is designed with two full-length keyways.This not only simplifies assembly but also allows for ease ofmodification to the actuator orientation to accommodate last minutepipe work changes, in addition to providing easier visual confirmationof alignment, thus reducing maintenance and assembly time.

6 WATSTM Wide Adjustable StopperIn order to set the actuator travel to give an accurate valve open/close point, two adjustable travel bolts are installed in front of the drive module. The unique shape of the yoke arm gives right-angled contact between bolt and yoke preventing deflection or damage. This unique design extends the adjustable range from -25 to +5 degrees.

03

5 Replaceable Bearing Low friction, permanently lubricated,high performance bearings protectall components, extending actuatorlife by ensuring smooth operation. Bearing replacement is simple andinstructions can be found in theoperating & maintenance manual.

Design and Construction

VersatilityThe T-type modular design consists of spring, power and drive modules. The modules havebeen designed for easy disassembly and this allows the actuator to be quickly and easilyconverted from double acting to single acting configuration, or for the addition of ancillariessuch as a manual override unit. The modular design allows these modifications to beperformed without removing the actuator from the valve.

Weather Proof T-type actuators comply withIP66 and IP67 specifications andare rated for high-pressure waterdeluge resistance.

High Visibility Position IndicatorA high visibility position indication beacon is available as an optionalfeature on the T-type actuator. The indicator is impact resistant andweather proof to IP67

High Torque and Compact DesignThe T-type actuator is smaller in comparison with other actuatorsoffering similar torque outputs. This reduces the overall valvepackage envelope providing a more compact design.

Integral Housing VentThe main actuator housing incorporates an integral check valve inorder to release overpressure while preventing ingress of foreignobjects or water.

05

Features Features

06

ISO or MSS MountingT-type actuators have valve mounting pads in accordance with MSS SP -101 or ISO 5211standard.

Torque OutputsT-type actuators have torque outputs ranging from 398N.m (3,526inch-lb) up to 800,000N.m(7,088,000inch-lb) and are rated for continuous operation at pneumatic pressures from3Bar (40psig) to 12Bar (170psig).

Temperature RangeStandard range: -20°C to +80°C (-30°F to +144°F)Special Low Temperature (optional): -45°C to +80°C (-81°F to +144°F)Special High Temperature (optional): -20°C to +177°C (-30°F to +318.6°F)

Spring UnitTo avoid accidental release of spring force the spring units are supplied as fully weldedmodules. The spring and spring retainer are self-centered and bearing guided within thespring module, ensuring accurate alignment and extending spring life. The spring iscompressed towards the drive module during operation, provides no impact on the spring endcover, reducing stresses and increasing safety. The spring tension can be adjusted to giveoptimum torque outputs.

External Tie RodsExternally mounted tie rods secure the piston cylinder assembly. These tie rods are designedto maintain cylinder integrity in the case of over pressurization by the pneumatic supply. Also external tie rods help to protect the cylinder from accidental damage.

Ancillary BracketA multi function bracket is available for ancillaries. The bracket can be assembled in variousconfigurations to provide optimum mounting of ancillary equipment

Symmetrical & Canted Torque Outputs

07

Optional NAMUR StandardT-type actuators have an optional VDI/VDE 3845 mounting interfaceenabling simple mounting of ancillary equipment.

Optional Visual IndicatorA high visibility position indicator is available as an option.

Spring Safety LockSpring tension can be adjusted. The spring module is designed with atension lock ensuring that the spring force cannot be accidentallyreleased during disassembly from the drive module.

Lifting EyesLifting eyes are factory installed making transportation, installationand assembly simple and safe.

Optional Manual OverrideOptional manual overrides such as jackscrew, gear and hydraulic overridecan be incorporated in accordance with customer's requirements. Thespecially designed hydraulic override cylinder is installed inside thespring module; this standardizes actuator overall length and isolates thehydraulic fluid to eliminate contamination and spillage.

Approvals and Industry StandardsActuators manufactured in conformity with CE certification to PED 97/23/ECActuators certified in accordance with ATEX 94/9/ECActuators certified to IP66/IP67Actuators designed and manufactured under a third party accredited ISO 9001:2000 quality assurance program.

Head Off ice l 534-2, Mugab-ri, Chowol-myun, Gwangju-si, Gyunggi-do, 464-863, Korea

Sales Division l Tel. 82 2 400 8450 l Fax. 82 2 400 8240 l http://www.flowbus.com l email : [email protected]

Corporation

Due to continous development product data is subject to change without prior notice. I Literature # PA.008.02.Rev.1-20/11/06

ww

w.flow

bus.com

Specialistand System

Valve Control

CorporationSales Office 7F, Insu Bldg, 205-4, Bangi-Dong, Songpa-Gu, Seoul, 138-050, Korea Tel : 82 2 400 1880 Fax : 82 2 400 8240 E-mail : [email protected]

Japan Office Level 9, Edobori centre building, 2-1-1, Edobori, Nishi-ku, Osaka, Japan 550-0003 Tel : 81 6 6225 1060E-mail : [email protected]

Factory 703-1 Dadong, Sihwa Indutrial Complex, 1239-8, Jeongwang-Dong, Siheung-Si, Gyeonggi-Do, 429-450, Korea Tel : 82 31 319 9301 Fax : 82 31 433 9180 E-mail : [email protected]

Literature # PQ.008.05.Rev-6/Nov/01/2012Due to continuous development product data is subject to change without prior notice.

Documents

Cover sheet.pptx [호환 모드] - KOTRA Brasil · actuators which are classified into the Scotch Yoke types such as EPT, EPA, EHT actuators and ... • Samsung Total Petrochemical