Crushing and Screeningl

Vir meer besonderhede, besoek ons Webblad by www.tradepost.co.za of kontak asseblief vir Jakkals Smal

Tel 082 - 455 9779, Faks 0866 728 762, E-pos [email protected]

Alle pryse sluit BTW uit, tensy anders spesifiseer. Laat weet asseblief indien U nie meer die lys op `n gereelde basis wil

ontvang nie.

Vir volledige lyste van items beskikbaar / benodig, besoek asseblief ons WebBlad by www.tradepost.co.za, kliek op

"Vind Lyste" (In die Main Menu, links onder die skets van die huisie) en kies onder Trade Post Ads, in rooi, net regs van

"Vind Lyste", die lys van Voertuie, Mynbou, Earthmoving, Boerebedryf, Boubedryf, Hystoerusting, Eiendom of Besighede,

wat U wil sien of aflaai. Skakel asseblief 082 - 455 9779, indien U probleme ondervind.

For comprehensive lists of items available / required, please visit our WebPage www.tradepost.co.za, click on "Vind

Lyste" (In the Main Menu, left, top of your screen, under the skets of the little house). Under Trade Post Ads, in red, just to

the right of "Vind Lyste", select the Voertuie, Mynbou, Earthmoving, Boerebedryf, Boubedryf, Hystoerusting, Eiendom or

Besighede, list that you want to view or download.

INHOUDSOPGAWE

C Screens / Grizzly's / Feeders D Crushers / Crushing Plants / Mineral Sizers

ITEMS BESKIKBAARScreens (mobile & stationary) / Grizzly's / Feeders www.tradepost.co.za

MAC031 9 x 22 DD screen with vibrating mechanisms, Witbank R 250 000.00

MAC042 2.6 x 8 Tripple deck, wire mesh screen, Kimberley. R 50 000.00

MAC043 6 x 16 Single deck dewatering screen, with stand and 22 kW electric motor, Kimberley area. R 120 000.00

MAC045 Allis Charmers, Low Head, vibrating mechanisms No 4 - 3. R 3 000.00 to R 10 000.00

MAC061 10 x 18 Allis Chalmers dewatering screen, single deck, without motors. R 170 000.00 and with motors.

R 270 000.00

MAC066 New Liners for Joest Vibrating Screens, 2 off 750 mm long x 500 mm wide x 80 mm thick, 3 off 730 mm long x

720 mm wide x 80 mm thick, 2 off 730 mm long x 720 mm wide x 120 mm thick. R 400.00 each

MAC067 3 x 12 Telsmith Vibrating Grizzley, Huwett Robins mechanism, coils springs included, new grizzley bars will be

supplied, Gauteng. R 160 000.00

MAC068 7 x 24 Single deck screen, woven mesh, Kimberley. R 225 000.00

MAC069 7 x 24 Double deck screen, woven mesh, Kimberley. R 275 000.00

VIND - 03 December 2009 - Crushing and Screening

MAC070 6 x 16 Single deck screen, woven mesh, Kimberley. R 70 000.00

MAC073 1.5 x 3.0 Meter, single deck screen, woven mesh, Kimberley. R 20 000.00

MAC075 Eliptex feeder 650 mm x 3.0 m, Kimberley. R 100 000.00

MAC080 4 x 16 Single deck screen, Kimberley. R 55 000.00

MAC081 6 x 16 Single deck screen, with exciter, Kimberley. R 55 000.00

MAC103 1 x 2 Tripple Deck Screen, woven mech, Kimberley area. R 100 000.00

MAC104 1.8 x 4.0 Meter Vibrating Grizzley with conveyors, Lichtenburg. R 110 000.00

MAC105 New 1.6 x 2.4 Vibrating Feeder, Riocarb liners. R 40 000.00 without vibrator motors or R 80 000.00 with 2 x

7.5 kW, 525 Volt Venanzetti vibrator motors, Gauteng

MAC106 Allis Charmers, Low Head, vibrating mechanisms No 3, Gauteng. R 12 000.00 each

MAC107 New 2 Off 8 x 16 Single Deck Screens, Gauteng. R 95 000.00 each

MAC108 New 5 x 16 Double Deck Screen, Gauteng. R 80 000.00

MAC110 New 6 X 12 Dubbel Deck Dewater Screen, 2 x 6.5 kW motors with porrel tank, trailer mounted, Kimberley area.

R 400 000.00

2

MAC113 New Mobile Trommel screen, 250 th, 100 x 50 mm apertures or as per client requirements, 2 x product belts,

Kimberley. R 800 000.00

MAC116 4 x 12 Telsmith Vibrating Screen, double deck, woven mesh, Gauteng. R 140 000.00 refurbished

MAC118 3.5 x 4.0 Meter stationary grizzly, Kimberley area. R 50 000.00

MAC119 3.5 x 4.0 Meter mobile grizzly, Kimberley area. R 150 000.00

MAC132 New 4 x 9 double deck screen, complete with stand and underpan, Kimberley. R 120 000.00

MAC133 2 Off 6 x 14 Envirotech Screens, double deck, overhead oscillating shaft, 800 RPM, 10 mm stroke, LPVE-11 DD

style, Kimberley. R 120 000.00 each

MAC135 500 mm x 1 300 mm Feeder, without vibrator motors, Kimberley. R 5 000.00

MAC137 3 x 8 Screen deck, Kimberley. R 15 000.00

MAC138 Pilot Crushtec tripple deck screen, 5 x 16, 2006 model, spray bars, discharge chutes on all three deck, underpan,

stand, skidbase, 2 x 10 kW, 380 Volt motors. R 300 000.00

MAC141 New 4 x 10 Single deck dewatering screen, 525 Volt vibrator motors, sump, 2 x 3/2 Warman pumps, Kimberley.

R 160 000.00

MAC142 Telsmith tripple deck screens, fully refurbished, including new bearings, decks & side plates, 50 deposit with

order, 4 weeks delivery, Cape Town area. 2 off 5 x 16, R 252 000.00. 1 Off 6 x 16, R 294 000.00. New stand,

underpan, catwalks, motor, drive pulleys and guards, R 144 900.00

3

MAC143 Telsmith vibrating grizzly feeder, 1.5 x 4.0 m, Telsmith vibrating mechanism with drive pulley, reconditioned with

new deck (deadbox or full effective screening area) and new side plates, 3 weeks delivery, Cape Town.

R 273 000.00

MAC145 2 x Carman Grizzley feeders, 2.6 m x 1.2 m, one equipped with new bars and liners, only one vibrating motor,

Welkom. R 50 000.00 for both units

MAC146 New 1 x 3 dewatering screen, Kimberley. R 9 000.00

MAC150 Osborn 6 x 16 tripple deck screen, without the stand and 2 decks only, R 190 000.00. Or with a third deck fitted,

R 235 000.00. Gauteng

MAC153 Klipsreen, 1.2 x 2.2 m, with feedbin and product belt, Kimberley area. R 250 000.00

MAC154 4 x 12 Ft VGF, completely rebuild, suitable for feeding >250 mm chrome / magnitite @ 50 tph, Gauteng.

R 180 000.00

MAC155 Newly manufactured Static grizzly, similar to the unit as per photograph, 250 mm apertures, suitable to screen

50 tph chrome / magnitite, Gauteng. R 80 000.00

MAC156 4 x 8 Pilot Crushtec double deck screen, reconditioned, suitable for screening tph 50 tph chrome / magnitite, top

deck 80 mm apartures, bottom deck 30 mm apartures, Gauteng. R 135 000.00

MAC157 3 x 6 Single deck screen, no motor, Kimberley area. R 33 000.00

MAC158 5 x 10 Double deck screen, 2 x 5.3 kW, 525 Volt Visam vibrating motors, Kimberley area. R 190 778.00

MAC159 1.5 x 4.25 m Single deck screen, wire mesh, 1 x 2.2 kW vibrator motor, Kimberley area. R 155 185.00

MAC160 4 x 9 Vibramech single deck screen, 2 x 2.27 kW Visam vibrator motors, Kimberley area. R 86 130.00

4

MAC161 4 x 12 Single deck dewatering screen, fully rebuilt, suitable for screening chrome / magnitite, 40 tph, 1 mm

apartures panels, price includes stand, vibrating motors, spray bars, underpan, discharge chute and panels,

Gauteng. R 160 000.00

MAC162 Reconditioned 4 x 14 Telsmith double deck screen, wire mesh, with 11 kW vibrator motor, Gauteng. R 165 000.00

MAC163 Reconditioned 4 x 14 Vibrating Grizzly Feeder, single row 4 ft grizzly bars, new 22 kW Vibrator motor, Gauteng.

R 185 000.00

MAC165 Refurbished 5 x 10 Tripple deck vibrating screen with motor, divider chutes & safety guards, Cape Town.

R 180 000.00

MAC167 Pan feeders, various sizes and capacities, Gauteng. POR

MAC170 2 x Rotary Trommel Screens, stainless steel, 750 mm dia x 3.5 m long, 5 mm wall thickness, 12 mm perfora-

tions along screen, comes complete with drives and chain, waste hopper at base with stainless steel collection

bin at end, on stand, Gauteng. R 45 000.00 each

MAC171 2 x New Linear screens, 25 m², Delkor design, structures only, Gauteng. R 500 000.00 each

MAC172 2 Off Reconditioned 5 x 16 Double deck screens, complete with stands, underpans and 380 Volt vibrator motors,

Gauteng. R 300 000.00 with spray bars. R 270 000.00 without spray bars

MAC173 2 Off Reconditioned 6 x 16 Double deck screens, complete with stands, underpans and 380 Volt vibrators motor,

Gauteng. R 300 000.00 each

MAC174 Reconditioned 10 x 18 Double deck screen, complete with stand, underpan and 380 Volt vibrator motors,

Gauteng. R 400 000.00

MAC175 4 X 8 Vibrating Screen, ''Hanging type'', single deck, without vibrator motors, Gauteng. R 71 500.00

MAC176 New 5 X 9 Vibrating Screen, double deck, with 2 x 2.2 kW, 380 Volt, vibrator motors, Gauteng. R 162 800.00

MAC177 New 4 X 8 Vibrating Screen, double deck, 2 X 2.2 kW, 380 Volt, vibrator motor, Gauteng. R 140 800.00

5

MAC177 5 X 16 Vibrating Screen, single deck, 2 x 4 kW vibrator motors, Gauteng. R 192 500.00

MAC178 4 x 9 single deck screen, Kimberley. R 20 000.00

MAC179 4 x 10 Vibrating screen, double deck,with stand, underpan, vibrator motors, Gauteng. R 160 000.00

MAC800 2005 Finlay 683, Supertrac & Hydrascreen, 2 000 hrs, 3 deck, excelent condition, Bloemfontein area. R1.2m

MAC801 Bateman double deck scalping screen with discharge conveyor, diesel engine. R 700 000.00

MAC802 Nordberg double deck scalping (box type) screen with vibrating head, choice of electric motor or 4 cylinder John

Deere diesel engine. R 200 000.00

MAC803 2005 Finley 694 3-deck screen (20 feet), 5 550 hrs, Witbank. R1 207 500.00

MAC804 2 Off 2008 Warrior 1800 Mobile Screens, double decks, 2 180 and 2 850 hrs, Gauteng. R 1.7m each

MAC805 2 Off 2008 Finlay 883 Mobile Screens, double decks 1 339 and 2 000 hrs, Gauteng. R 1.5m each

MAC806 2004 Finlay 883 Mobile Screen, 2 x new outriggers, engine reconditioned, side belts need attention, Witbank.

R 787 500.00

MAC807 2003 Track mounted Extec S5, 5 x 16 double deck screen, live vibrating head, 4 000 hrs, Deutz engine, Gauteng.

R 1.419m

MAC808 2005 Track mounted Extec E7, double deck screen, punch plate and finger top deck, 50 mm mechanical bottom

deck, 4 000 hrs, Deutz engine, Gauteng. R 1.617m

MAC809 2006 Track mounted Extec S3, 5 x 10 double deck screen, 3 000 hrs, Deutz engine, tippnig grid, remote

controll, Gauteng. R 1.32m

MAC810 2004 Track mounted Fintec 542, 5 x 12 double deck screen, 6 000 hrs, new Deutz engine with 500 hrs, tippnig

grid, remote controll, Gauteng. R 1.32m

6

MAC811 2000 Powerscreen Commander 510, 5 x 10 single deck screen, 4 500 hrs, Deutz engine, Gauteng. R 825 000.00

MAC812 Refurbished 2007 Track mounted Powerscreen Chieftan 1700, 5 x 16 tripple deck screen, 1 600 hrs, Deutz

engine, tippnig grid, remote controll, Gauteng. R 2.420m

MAC813 2008 Track mounted Powerscreen Chieftan 1400, 5 x 10 double deck screen, 300 hrs, Deutz engine, tippnig grid,

remote controll, Gauteng. R 2.420m

MAC814 2007 Track mounted Powerscreen Warrior 1400, fingers top deck, mesh bottom deck, 1 900 hrs, Deutz engine,


MAC815 New 2008 Track mounted Powerscreen Warrior 1400, fingers top deck, mesh bottom deck, 0 hrs, Deutz engine,

remote controll, belt feeder, Gauteng. R 2.607m

MAC816 Nordberg Mobile Scalping Screen, very good order, ready to work, 4 cylinder diesel engine, Mphumalanga.

R 475 000.00

MAC816 Nordberg Mobile Scalping Screen, very good order, ready to work, 4 cylinder diesel engine, Mphumalanga.

R 475 000.00

MAC817 Parker Mobile Double Deck Screen, 4 cylinder diesel engine, new wire mesh, skirting rubbers and liners, unit to

be painted, Gauteng. R 980 000.00

Crushers / Crushing Plants / Mineral Sizers www.tradepost.co.za

MAD009 Barmac VSI rotors, 840 mm dia, reconditioned with new parts, Kimberley. R 15 000.00

MAD025 Hadfield 30 x 23 (23 x 30) double toggle jaw crusher, white metal bearings replaced with bronz, wear liners

rened. R 350 000.00

MAD026 L R Schmith 6 x 48 granulator. R 200 000.00

7

MAD027 48 x 64 Allis Chalmers Crusher, bin, apron feeder 1.8 x 8.0 meters and 900 mm x 30 m discharge conveyor.

R 2.5m

MAD035 Reconditioned 24S Telsmith Cone Crusher, with lube system, suitable for ±20 tph green stone or standard

iron stone at 8 mm setting Gauteng. R 375 000.00 or with lube system, 37 kW motor, switchgear and stand,

Gauteng. R 420 000.00

MAD041 10 x 16 Telsmith Jaw Crusher, fully rebuilt, Gauteng. R 140 000.00 or R 190 000.00 with stand and motor

MAD045 10 x 16 Hadfield Jaw Crusher, single toggle, refurbished, Gauteng. R 110 000.00

MAD049 Morando 6LA Rolls Crusher, 1 000 mm dia x 630 mm wide rollers. R 220 000.00

MAD068 Roller Crusher for brick plants, 300 and 600 mm dia x 480 mm wide rollers, 1.4 x 2.4 m overall dimentions,

Kimberley. R 80 000.00

MAD070 New 16 x 24 Duling Watson Jaw Crusher with 30 kW electric motor, Gauteng. R270 000.00

MAD072 Bowl for a 3 ft Symons shorthead cone crusher, Gauteng. R 65 000.00

MAD073 Swing Stock for a 18 x 48 Telsmith Jaw Crusher, Gauteng. R 200 000.00

MAD074 Tornado VS-AC 07 VSI Crusher, as new, suitable for 60 th, to crush -35 mm to very fine, 75 kW electric motor,

Kimberley area. R 250 000.00

MAD077 Osborn Double Roll Coal Crusher, 30 x 60, 2 x 6" gearboxes, 2 x 22 kW elect motors, Gauteng. R 380 000.00

MAD089 New, 2 x 4 Jaw Crushers, on skids, with 1.1 kW motor, suitable for 200 to 500 kg per hour, 45 mm feed, crushed

to 3 mm, total weight is 138 kg. R 27 000.00 each

8

MAD090 8 x 12 Telsmith Jaw Crusher, with motor, Gauteng. R 110 000.00

MAD094 30 x 23 (23 x 30) Hadfield Jaw Crusher, double toggle, white metal bearings, good running order, wearing parts

are readily available, Gauteng. R 320 000.00

MAD095 New Mineral Sizers, various applications and sizes. POR

MAD096 Hadfield 30 x 23 (23 x 30) Double toggle Jaw Crusher. R 250 000.00 or refurbished. R 580 000.00

MAD100 13 x 24 Jaw Crusher, Gauteng. R 115 500.00

MAD101 36" Gyro Crusher, Ukraine make, complete with motor and lube system, maganese liners available, Gauteng.

R 525 000.00

MAD103 Manufacturer of crusher components, excluding castings. POR

MAD104 3 Ft Symons cone crusher, standard head, reconditioned, 3 month warranty, with motor and lube system,

Gauteng. R 685 000.00

MAD105 13 x 24 Hadfield Jaw Crusher, single toggle, roller bearings, Johannesburg. R 165 000.00

MAD106 42 x 48 Allis Charmers Jaw Crusher, double toggle, white metal bearings, Gauteng. R 525 000.00 without

electric motor or R 577 500.00 with 110 kW electric motor

MAD112 1 020 x 1 550 Pulveriser complete met chain feed, Johannesburg. R250 000.

MAD114 Hazamac APKW8606 Crusher, as new, suitable for 80 th, with 110 kW motor, Vryburg area. R160 000.00

9

MAD116 4 x 8 Double toggle jaw crusher, mounted on a stand with a 11 kw motor, as new, ready to work, spare parts

available. R 63 000.00

MAD117 14 x 24 Telsmith jaw crusher, reconditioned, Gauteng. R 385 000.00

MAD119 14 x 24 Telsmith jaw crusher, reconditioned, Gauteng. R 295 000.00

MAD120 MMD S154 Mineral Sizer, complete with R22 -28-1 Ratio gear box, and fluid coupling, fully reconditioned, U K.

£55 000 (Sterling)

MAD121 Telsmith 36S C Style Cone Crusher, fully rebuilt, 3 m warranty, 75 kW motor, lubrication system, suitable for

±30 tph green stone or standard iron stone at 8 mm setting, Gauteng R 650 000.00, or R 700 000.00 with stand

and starter panel

MAD130 Telsmith 18 x 32 Jaw Crusher, fully rebuilt, new shaft, bearings, labyrinth seals, jaw liners, cheek plates,

3 month major component warranty. R 650 000.00

MAD131 New 4¼ Ft Symons cone crushers, fully hydraulic, standard or shorthead, price includes motor, lubrication

system, but no electric control cabinet, 30 days delivery, weight:23 tons. $ 80,000 (USD) each, FOB, Port of

Dalian, North Eastern China

MAD132 14 x 24 Telsmith jaw crusher, fully refurbished, 6 months warranty, Cape Town. R 325 000.00

MAD137 23 x 30 Hadfield jaw crusher, double toggle, roller bearings, Gauteng. R 180 000.00

MAD138 Telsmith 48” C style S gyrasphere crusher refurbished by Osborns, Cape Town. R 861 000.00

MAD141 New 25 x 36 Sheffield jaw crusher, with 75 kW electric motor and V-belts, Johannesburg. R 635 000.00

MAD142 20 x 32 Metso STRB jaw crusher, fabricated frame, 1997 model, new cheek plates, jaw liners 60%, new jaw

liners available, Cape Town. R 525 000.00

MAD143 20 x 30 Hadfield jaw crusher, single toggle, with stand, electric motor and 8 m x 1050 mm stackpile conveyor,

Gauteng. R 400 000.00

MAD145 14 x 24 Telsmith Jaw Crusher, stripped with all components available except 2 x side bearings, Gauteng.

R 185 000.00

MAD146 15 x 24 Hadfield Jaw Crusher, jawstock broken, Cape Town. R 69 000.00

10

MAD147 20 x 30 Hadfield single toggle Jaw Crusher, needs attention, Gauteng. R 265 000.00

MAD148 25 x 36 Osborn Jaw Crusher, double toglle with motor and permanent lube system, very well maintained,

Gauteng. R 600 000.00

MAD149 Crusher Bearing Cartridge, Kimberley. R 85 000.00

MAD155 25 x 36 Hadfield Jaw Crushers, single toggle, operated for 3 months subsequent to overhaul, Cape Town.

R 600 000.00

MAD156 25 x 36 Telsmith Jaw Crusher, very good condition, single toggle, Cape Town. R 610 000.00

MAD158 Reconditioned 30 x 80 Hadfield double roll coal crushers, 2 030 mm x 762 mm rollers, 140 roller RPM, 2 x 55

kW electric motors with fluid drive couplings, 350 mm maximum feed size, crushing capacities are 560 tph @

50 mm, 430 tph @ 38 mm, 360 tph @ 32 mm and 280 tph @ 25 mm, 15.5 ton total weight, 8 to 10 weeks

delivery, Gauteng. R 850 000.00, or R 975 000.00 to mount the unit on a skidbase. Chutes and conveyor belts

can be manufactured to client specifications, at an addition cost

MAD159 Crusher with bin and feed conveyor, suitable to crush kimberlite from 150 mm to 19 mm @ 60 tph, complete withreconditioned Telsmith 36S C style cone crusher with lube system and 75 kW electric motor mounted on a

stand, 8 m³ feedbin equipped with 150 mm aperture static grizzly bars, 15 m x 600 mm conveyor feed conveyor

with gearbox and electric motor, stater panels and electric cables, Gauteng. R 980 000.00

MAD160 25 x 36 Telsmith Jaw Crusher, double toggle, Gauteng. R 750 000.00

MAD162 Coal Crushing Plant, 600 tph, comprising of 32 m³ loading bin, 5 x 16 vibrating grizzly feeder, new Sheffield 48

x 60 Jaw crusher, 1.2 x 30 meter discharge conveyor to screen, 8 x 20 single deck screen on stand, reconditioned

30 x 80 double roll coal crusher, 1.2 x 30 meter stockpile conveyor, electric switchgear and cables. R 5.5m

MAD163 Complete crushing plant to produce 19mm, 13mm, 6mm crusher stone and crusher dust at roughly 120 tph.

The plant will consists of the following - Telsmith 2536 STRB Jaw crusher mounted on a static frame complete

with VGF feeder, operator platform, and feed bin. Telsmith 48” C style Std refurbished, including liners, oil pump,

oil tank, filter and gauges.Telsmith 4x12 double Deck screen fully refurbished complete with all catwalks, chutes

and electric motors, all on a static frame. 5 x18 m conveyors 600mm wide with shaft-mounted gear box, electric

motor, tail chutes and stands. 1 x 30m 750mm wide with shaft-mounted gear box, electric motor, tail chutes and

stands. Telsmith 5x16 triple Deck screen fully refurbished complete with all catwalks, chutes and electric

motors, all on a static frame. 6 Month warranty on all workmanship. Price excludes all electrics. 10 to 12

weeks delivery. 50% Deposit with order, Cape Town. R 3.922m

11

MAD164 Crushing and screening plant, 100 th, complete with conveyors, structures, bin and screen and without the

14 x 24 Jaw Crusher and a 36" Gyro Crusher, which have been sold separately. R 950 000.00 A 14 x 24 Jaw

Crusher and a 36" Gyro Crusher can be supplied at an additional cost, Northern Province.

MAD165 Crushing and screening plant, 150 mm headfeed @ 60 th, crush and screen to crusher dust, -13 mm and

-19 mm, consisting of 14 x 24 Telsmith Jaw Crusher, 2 ft standard Symons Cone Crusher, Screens, belt magnet

and 6 x product belts, Kimberley area. R 1.2m

MAD166 12 x 48 Hadfield Jaw Crusher, with 75 kW electric motor and stand, suitable for crushing 40 tph chrome /

magnitite from 250 mm to >30 mm, Gauteng. R 660 000.00

MAD167 2 Off 10 x 21 Teslmith Jaw Crushers, mounted on a skid base with electric motor, working side by side, suitable

for crushing 40 tph chrome / magnitite from 250 mm to >30 mm, Gauteng. R 210 000.00 each

MAD168 6" Massco Lab Cone Crusher, Kimberley. R 10 000.00

MAD169 36" Telsmith D style Cone Crusher, used for sand production, fully reconditioned, with lube system, 2 x new

liners and without electric motor, Durban area. R 440 000.00

MAD170 Barmac Crusher, complete with 110 kW motor, Kimberley area. R 252 000.00

MAD171 10 x 21 Tesmith Jaw Crusher, reconditioned, with electric motor and V-belts, Gauteng. R 189 000.00

MAD172 30 x 42 Jeffery Pulveriser with electric motor, good working condition, suitable for salt and lime applications,

Gauteng. R 190 000.00

MAD175 Reconditioned Allis Chlamers 1384 Cone Crusher (the 13 indicates the feedsize 13" rock (325mm) and the 84

means it has an 84" (7ft) diameter crushing chamber). The minimum size it can crush down to is 19mm and at

this setting it can do around 500 tph - the capacity then moves up as the setting opens up, 3 months delivery,

Gauteng. R 4.2m

MAD176 25 x 36 Telsmith Crusher, D-style, single toggle, reconditioned with warranty, Gauteng. R 900 000.00

MAD177 25 x 36 Hadfield Crusher, single toggle, with VGF and electric motors for both the crusher and VGF, Port

Elizabethg. R 650 000.00

12

MAD178 Crushing combination, frame mounted, comprising of a refurbished 14 x 24 Telsmith Jaw Crusher with electric

motor, Plate Feeder with electric motor, 8 m³ feedbin lined with Bennox wearliners, mounted on new frame with

catwalks, safety guards, ladders etc, Cape Town. R 400 000.00

MAD179 Refurbished 2ft Symonds Cone Crusher complete with electric motor, lube system, mounted on a full frame,

Cape Town. R 320 000.00

MAD180 Complete ready to work, Crushing Plant with full DME compliance, comprising of a frame mounted refurbished

14 x 24 Telsmith Jaw Crusher, Plate Feeder and 8 m³ Feedbin lined with Bennox wearliners, a frame mounted

refurbished 2ft Symonds Cone Crusher, a frame mounted refurbished 5 x 10 Tripple deck vibrating screen, 10 x

product belts, electric distibution panels, switchgear, electric motors and electric cables, Cape Town. R 1.25m

MAD181 Barmac Dupactor crusher, Kimberley area. R 150 000.00

MAD182 Cone Crusher Shaft, never been used, 2 100 mm long x 100 mm diameter, Kimberley. R 15 000.00

Prys R15 000

MAD183 30 x 42 Telsmith Jaw Crusher, single toggle, in good running order, Gauteng. R 900 000.00

MAD184 New 30 X 42 Du Ling Watson Jaw Crusher, spare parts available in the country, Gauteng. R 950 000.00

MAD185 30 X 42 Hadfield Jaw Crusher, single toggle, to be refurbished, Gauteng. R 1.1m

MAD186 Reconditioned 30 x 42 Hadfield Jaw Crusher, single toggle, Gauteng. R 1.15m

MAD190 New 25 x 36 Duling Watson Jaw Crusher with electric motor, Gauteng. R 650 000.00

MAD191 New 12 x 48 Hadfield Ganulator, 250 mm feedsize, 12 mm (15 tph) to 75 mm (120 tph) product size, without

electric motor, Gauteng. R 550 000.00

MAD192 20 x 36 Telsmith Jaw Crusher, single toggle, with electric motor, Klekrsdorp area. R 400 000.00

MAD194 9 Inch Jaw Crusher, 4 kW 380 Volt electric motor, Gauteng. R 37 000.00

MAD195 42 x 42 Allis Chalmers Jaw Crusher, double toggle, Gauteng. R 750 000 "as is" or R1.56m reconditioned

MAD196 New Rolls Crushers, 5 to 40 tph capacity, 5 to 16 mm feed size, Gauteng. POR

13

MAD197 30 x 80 Hadfield Double Roll Coal Crusher hadfield, 280 ton @ 25 mm to 560 ton @ 50 mm, 2 x 55 kW motor,

fluid drive coupling. R 900 000.00

MAD198 2 x Refurbished Jaw stocks, suitable for a 18 x 32 Telsmith Jaw Crusher, single toggle, 3 weeks delivery from

receipt of order, Gauteng. R 263 000.00 each

MAD199 25 x 36 Telsmith Jaw Crusher, single toggle, with stand, Klerksdorp. R 400 000.00

MAD204 2 x Pex 150 x 750 (6 x 30) Duling Watson Granulators, Guateng. R 150 000.00 each

MAD205 Heavy Duty Miag Braunschweg Hammer Mill, mouth opening 240 mm wide x 410 mm long. Hammer size 160

mm long x 80 mm wide x 20 mm thick, 6 sets of 6 hammers, Gauteng. R 46 000.00

MAD206 New 18 x 48 Hadfield Granulator, complete with fly-wheel, electric motor and V-belts, 3 months delivery,

Gauteng. R 1 312 500.00

MAD207 2 Off New 12 x 48 Hatfield Granulators, complete with fly-wheel, electric motor and V-belts, available early

November 2009, Gauteng. R 550 000.00

MAD209 Granulator, 3 Blade, 230 mm x 230 mm, 3 rotation blades – 2 static, 5,5 kW , 955 RPM, Gauteng. R 48 000.00

MAD210 Alpine Augsburg R016/18 Granulator, 920 x 430 mm feed hopper, 175 x 140 mm throat, 170 mm blades, 3

moving and 2 static blades, Gauteng. R 22 000.00

MAD211 Telsmith 36"C style Cone Crusher complete runner, owner upgraded, supplied with new upper and lower

bearings, refurbished countershaft box, Cape Town. As is, R 560 000.00 or refurbished, R 650 000.00

MAD212 4¼ Symons Cone Crusher, shorthead, being overhauled, with lube systems and electric motor, available end

October 2009, Gauteng. R 1.3m

MAD213 Pilot Crushtec PR0605 Impact Crusher, with stand and discharge conveyor, Pretoria. R 170 000.00

MAD214 Telsmith 18 x 32 Crusher, bearing caps, toggle plate and drawback rods missing, Gauteng. R 285 000.00

MAD215 Swingstock, suitable for a Telsmith 18 x 32 Crusher, with bearings and flywheels, Gauteng. R 185 000.00

14

MAD218 New 16 x 24 (400 x 600) Duling Watson Jaw Crusher, 340 mm feedsize, 40 to 100 mm product size, 16 to 65

tph capacity, complete with 30 kW, 740 RPM, 380 Volt electric motor, Gauteng. R 235 000.00

MAD222 Reconditioned Allis Chalmers 84 " Hydrocone Crusher, lube system, cooling system, hydroset adjustment, 315

kW electric motor, 2 to 3 months delivery, Gauteng. R 4.0m 70% dep with order and 30% on final inspection

MAD223 New Metso, Nordberg Cone Crusher liners, 5 ½ ft short head, XT510 manganese, 1 of each, bowl liner, mantle

liner, cover, Kimberley. R 40 000.00 total

MAD221 Reconditioned 5½ ft Symons Cone Crusher, 12 weeks delivery, Gauteng. R 3.1m

MAD224 New Hyprocone Crusher, similar to the Nordberg HP 200 Cone Crushers, with electric motor, lube system and

hydraulic pack, Gauteng. R 1.365m

MAD225 Allis Chalmers 36 inch x 7 inch Cone Crusher, Gauteng. R 300 000.00

MAD226 42 x 48 Hadfield Jaw Crusher, double toggle, roller bearings, as is R 1.1m and reconditioned with new liners and

3 months warranty, R 1.8m. Gauteng

MAD227 36 x 42 Hadfield Jaw Crusher, double toggle, 160 kW electric motor, 1.8 m x 8 m apron feeder, feed bin and

steel structure, Limpopo. R1.150m

MAD228 10 x 21 Telsmith Jaw Crusher, Gauteng, as is, R 125 000.00 or reconditioned with warranty R 225 000.00

MAD229 Bowl suitable for a 4¼ Symons Cone Crusher, short head, part No S44 528S, 5% wear, Gauteng. R 70 000.00

MAD230 Swing stock, with flywheel and pulley, suitable for a Telsmith 30 x 42 Jaw Crusher, D - Style, Gauteng.

R 210 000.00 as is or reconditioned with 3 months warranty, R 450 000.00

MAD234 Reconditioned 3 x 5 Lab Jaw Crusher, reconditioned with tested electric motor, 4 weeks delivery, Gauteng.

R 35 000.00

MAD231 25 x 36 Telsmith Jaw Crusher, single toggle, good condition, Gauteng. R 600 000.00

15

MAD232 5½ Ft Symons Cone Crusher components, Cape Town area. Eccentric complete, new gear bolt on and inner

brass bush, R 400 000.00. 2 Off outer brass bushes, R 70 000.00 each. 2 Off socket liners, R 45 000.00 each

MAD233 10 x 21 Telsmith Jaw Crusher, Gauteng. R 130 000.00 or repaired R 185 000.00

MAD235 Telsmith size 48” Standard in excellent working condition, excluding motor and lube system, Gauteng.

R 595 000.00

MAD236 Double Rolls Crusher 1016 mm Dia x 890 mm (40” x 35” )Smooth Rolls including 2 x 55kw 380v Electric Motor.

Fitted with spring loaded tramp relief. The crusher was reconditioned and used for a week, see the paint on the

working face of the rolls, the unit is in excellent condition. The unit has been standing in the elements for the

past 6 years it will therefore be fully reconditioned including sandblast, paint, bearings, belts and any other worn

or damaged components replaced, supplied with a 3 month warranty, Gauteng. R 260 000.00

MAD237 Telsmith 42 x 48 Jaw Crusher, base frame and pitman refurbished. The bearings seem good, as it rolls over

smoothly, without excessive play. It needs new dies, along with some hardware and the oil pump. Complete,

ready to work, with new dies, oil pump, and required hardware, R 1.4m. As Is R 890 000.00. Ex UK, delivery to

be confirmed. Shipping dimensions and weights available on request.

MAD238 4 Off Trio Crushers 600 x 1400, brand new, still in crates, suitable for product: DAP or NPK or MAP (fertilizer),

temperature: 95 to110 deg C, moisture: 1.5 to 2%, bulk density: 900 to1050 kg/m³, design capacity: 50 tph,

speed of cylinders: 550 RPM, motor size: 37 kW & 75 kW, inlet product: 90% >4 mm, inlet product: 10% 2 to

4 mm, inlet product: 0% <4 mm, outlet product: 5% to 10% max > 4 mm, outlet product: 40% to 60% max 2 to

4 mm, outlet product: 30% to 50% max <2 mm, Gauteng. R 1.1m each Technical details and the list of spare

componets are available on request.

MAD239 New Symons Crusher Componenets. 6 x Bowl liners for 5½ ft short head, part No 4830-6056, R 11 086.00 each.

8 x Mantle liners for 5½ ft short head, part No 105013-7025, R 11 086.00 each. 2 x Caps bottom main frame,

part No 802302-4001. 1 x Feed plate, part No 105598-5701, R 2 750.00. 12 x Spring bolts, 4¼, R 325.00 each.

6 x Cluster, 4¼, R 1 800.00 each. 3 x Cluster, 5½, R 2 200.00 each. 20 x Springs, 4¼, R 1 340.00 each.

5 x Oil coolers, 4¼, R 1 500.00 each. 1 x Oil coolers, 5½, R 1 800.00. 4 x Distributor plate, 5½, part No 5508-

7381, R 3 990.00 each. 1 x Feed cone, part No 7478 - 0088, R 1 920.00. Welkom

MAD240 4¼ Symons Cone Crusher, standard head, 132 kW electric motor, lube system, runner, Gauteng. R 880 000.00

as is, or overhauled with 6 months warranty, 4½ weeks delivery. R 1.2m

MAD241 4¼ Symons Cone Crusher, shorthead, to be overhauled with 6 months warranty, 4½ weeks delivery, 132 kW

electric motor, lube system, Gauteng. R 1.2m

MAD242 Hazemag APK 1010 horizontal shaft impactor crusher, with 110 kW electric motor, on a stand with catwalks,

access stairs, hydraulic power pack and discharge chute. Bought new, ran for 6 months and shut down, Cape

Town. R 450 000.00

16

MAD243 4¼ Symonds Cone Crusher, standard head, with stand, elecric motor, lube and switchgear, still in use, Klerks-

dorp area. R 682 500.00

MAD244 Hadfield 20 x 36 Jaw crusher, single toggle, with stand, elecric motor and switchgear, still in use, Klerksdorp

area. R 367 500.00

MAD245 3 ft Telsmith Cone Crusher 36 inch, C style, standard. Symons 3 ft short head. 36 Inch Gyrodisc. All three

units complete with electric motors, lube systems and switchgear, Klerksdorp area. R 231 000.00 each

MAD246 Reconditioned Symons 7 ft standard Cone Crusher, main shaft assembly, Gauteng. R 756 000.00

MAD247 2 x Reconditioned Symons 3 ft mainframe, complete with spring segments and mainframe bush, Gauteng.

R 325 000.00 each

MAD248 Reconditioned Telsmith 25 X 36 single toggle Jaw Crusher, Gauteng. R 855 000.00

MAD249 Reconditioned Symons 36 inch Gyro Disc, support bowls, complete with upper liner, wedge and bolts, Gauteng.

R 105 000.00 each

MAD250 600 x 900 (24 x 36) Sheffield Jaw Crusher, worked for 5 days since new, Bloemfontein. R 370 000.00

MAD251 Reconditioned Symons 48" GYD Gyradisc Cone Crusher, complete with lube system and electric motor, 4 weeks

from date of order, Gauteng. R 1.385m

17

MAD252 Reconditioned 5½’ Symons Standard Cone Cruhers, complete lube system, 5 to 6 weeks delivery, 50% deposito

with order, Gauteng. R 3.965m

MAD253 Reconditioned Barmac Mark II VSI Crusher, new crushing chamber, new stand with catwalks and access

stairs, new 110 kW electric motor, new Ore Master 4 port rotor fully cladded, production roughly 100 tph, 60%

deposit with order, four weeks delivery, three month warranty, cape Town. R 430 000.00 or R 460 000.00 with

185 kW electric motor

MAD254 Nordberg B50010 Vertical Impactor, complete with 160 kW electric motor, Gauteng. R 210 000.00

MAD255 9 Ft Allis Chalmers Cone Crusher, 1988/1989 model, complete with electric motor, spare electric motor and lube

system, well maintained. Kimberley. R 2m

MAD256 Reconditioned Symons 3 ft STD Support Bowl, complete with liner, Gauteng. R 105 465.00

MAD257 Reconditioned Symons 4¼ STD mainshaft assembly complete, R 192 215.00. Reconditioned Symons 4¼

shorthead mainshaft assembly complete, R 184 625.00. Gauteng

MAD258 Reconditioned Symons 4¼ STD Support Bowl, complete with liner, R 185 865.00. Reconditioned Symons 4¼

shorthead Support Bowl, complete with liner, R 176 435.00. Gauteng

MAD259 Semi-mobile crusher and screening plant on skids for kimberlite and other minerals. Discharge conveyor slides

in when in transit. Refurbished 11 x 21 jaw crusher with feed bin, equipped with grizzly bars. 250 mm Feed size.

32 mm screen size.size can be adjusted, 15 to 25 tons per hour depending of the feed product and screen size.

Complete with guards and electrical. Kimberley area. R 450 000.00

MAD260 Reconditioned Telsmith 48 ‘FC’ mainshaft assembly, Gauteng. R 72 650.00

18

MAD801 Electrically driven mobile Hadfield 20 x 30 jaw crusher complete with loading hopper, vibrating grizzly feeder and

mounted on a 2 axle lowbed trailer. R 650 000.00

MAD802 2005 Model, 900 x 600 Terex Pexon mobile Jaw Crusher, track mounted, 2 900 hrs, Cape Town. R 2.25 m

MAD803 2006 Pilot Crushtec Twistertrack, 3 700 hrs, Witbank. R 1.26m

MAD804 2005 Pilot Crushtec Twistertrack, 2 500 hrs, Harrismith. R 1.36m

MAD805 Hartl Impact Crusher, suitable for crushing 40 tph chrome / magnitite from 30 mm to >1 mm, Gauteng.

R 275 000.00

MAD806 Hazemag APK 1010 with drive motor and hydraulics, mounted on a double axle mobile frame, VGF Feeder,

Feed hopper, Hydraulic jacking legs, switch gear, dischrage conveyor, operator platform, Cape Town.

R 550 000.00

MAD808 2 x 900 x 600 Terex Pexon Mobile Jaw Crushers, track mounted, Cape Town. 1 x 2000 Model, R 1.55m.

1 x 2002 Model, 5 000 hrs, R 1.65m.

MAD809 Metso LT 106 Jaw Crusher, 28 x 42, 900 hrs, Gauteng. R4.0m

MAD810 2005 Metso LT105 Mobile Crusher and 2003 Metso ST356 Track Mounted double deck Screen as a package.

Both machines are currently in operation. Metso LT105 Mobile Crusher - 5 800 hrs, CAT C9 engine, hydraulic

folding bin, hydraulic setting jaw, reversible swing stock, side conveyor, overband magnet, extended main

conveyor, jaws 40%, conveyor belting 90%, undercarriage 80%, machine was bought from demo model and only

crushed rubble its whole life, changed liners once a year very light duty, machine is very neat well maintained

and serviced. Metso ST356 Track Mounted Screen - Deutz 1013C engine, 6 600 hrs, Cape Town area. R 3.1m

MAD811 Refurbished Trackmounted Cone Crusher, Symons 3ft Std Crusher, feed hopper with 750 mm belt feeder and

discharge, new Cummins 130 KVA generator or similar, 900 mm discharge conveyor, starter panel and cabling,

new internal final drive components, new liners plus a spare set of used liners 70%, new hydraulic power pack

and motor to drive tracks, 60% deposit with order, eight weeks delivery, Cape Town. R 1.48m

MAD812 New Track mounted Extec C12, 1 200 x 750 Jaw Crusher, 2008 model, CAT engine, side conveyor, overband magnet,

remote controll, hydraulic adjustment, Gauteng. R 4.73m

19

MAD813 2 Off 2003 Track mounted Extec C12, 1 200 x 750 Jaw Crusher, 2008 model, Deutz engine, side conveyor, overband

magnet, remote controll, hydraulic adjustment, Gauteng. R 2.409m each

MAD814 2005 Track mounted Extec C12, 1 200 x 750 Jaw Crusher, 2008 model, Deutz engine, 1 900 hrs, side conveyor,

overband magnet, remote controll, hydraulic adjustment, Gauteng. R 3.025m

MAD815 2006 Track mounted Extec C12, 1 200 x 750 Jaw Crusher, 2008 model, Deutz engine, side conveyor, overband

magnet, remote controll, hydraulic adjustment, Gauteng. R 2.915m

MAD816 2002 Track mounted Extec C10, 1 000 x 650 Jaw Crusher, Deutz engine, 4 500 hrs, side conveyor, overband






MAD819 2004 Track mounted Extec C13, 1 300 x 1 000 Impact Crusher, Deutz engine, 1 000 hrs, underpan, overband


MAD820 2002 Track mounted Pexon Premier Track, 1 100 x 650 Jaw Crusher, CAT engine, 6 500 hrs, side conveyor,








MAD824 2005 Track mounted Pexon Metrotrack, 900 x 600 Jaw Crusher, CAT engine, 2 400 hrs, side conveyor,


MAD825 2005 Track mounted Pexon Metrotrack, 900 x 600 Jaw Crusher, CAT engine, 3 200 hrs, side conveyor,


MAD826 2002 Track mounted Parker, 1 100 x 650 Jaw Crusher, CAT engine, 6 000 hrs, side conveyor, overband magnet,


MAD827 2002 Track mounted Parker, 900 x 600 Jaw Crusher, CAT engine, 4 000 hrs, side conveyor, overband magnet,


MAD828 2003 Pegson Maxtra 1000 Cone Crusher, 6 000 hrs, CAT engine, Gauteng. R 3.685m

MAD829 2006 Pegson Maxtra 1000 Cone Crusher, 1 500 hrs, CAT engine, Gauteng. R 4.169m

MAD830 2007 Track mounted Sandvik X44 Cone Crusher, with recirculation screen, Gauteng. R 5.786m

20

MAD831 Trailer mounted new 10 x 30 Hatfield single toggle Jaw Crusher, Vibramec vibrating feeder, 3 x product belts,

motors and electrics refurbished, requires 70 KVA Genset to operate, Gauteng. R 1.152m

ITEMS WANTED

Screens (mobile & stationary) / Grizzly's / Feeders www.tradepost.co.za

MBC010 2 x Allis Charmers, Low Head, vibrating mechanisms, size 3D

MBC011 2 Off Debmar screens, model SS2000, double deck

MBC015 8 x 22 Tripple deck screen

MBC016 400 to 600 th Trommel screen

MBC017 Hand operated trommel screen

MBC801 Mobile Scalping Screen

Crushers / Crushing Plants / Mineral Sizers www.tradepost.co.za

MBD013 10 x 20 Goodwin crusher components

MBD017 Fly wheel and counterweight for a 12 x 36 Telsmith crusher

MBD018 Double Roll, Coal Crusher, 100 th

MBD020 Mineral Sizer, suitable for crushing 600 th coal, -200mm feed size to +50 mm

MBD026 3 To 5 th, Lab, rolls crusher

MBD029 Swingstock and flywheels for a Telsmith 21 x 10 Jaw Crusher

MBD030 Flywheels vir ‘n Telsmith 14 x 24 Jaw Crusher

MBD034 Drive pulley for a 48 X 60 Allis Chalmers double toggle jaw crusher

MBD035 42 x 48 Single toggle Jaw Crusher, roller bearings

MBD038 5½ Ft Shorthead or standard head cone crusher

MBD039 Components for a Symons Nordberg HP700 crusher, ie. Liner part number 1048314329, liner part number

4830-65018, liner part number 1048517580

MBD040 Components for a 54-74 Allis Charmers crusher, ie. Wear plate part number 1880-0, pinion shaft assembly

MBD041 Components for a 57-74 Allis Charmers crusher, ie. Housing assembly

21

MBD048 Hazemag 1010 Crushers

MBD049 Crushing and screening plat, suitable to crush and screen 100 tph, 300 to 400 feed size to -19 mm aggregate

crusher stone and asphalt products

MBD052 12 x 36 Jaw Crusher, single toggle

MBD054 18 x 30 Hadfield Jaw Crusger, single toggle

MBD056 Jaw stock for a 18 x 32 Telsmith Jaw Crusher, single toggle

MBD057 2 x Nordberg Cone Crushers, GP100S or HP 100, reconditioned with electric motors and lube systems

MBD059 2 x Nordberg Cone Crushers, HP 200, reconditioned with electric motors and lube systems

MBD060 60 x 80 Jaw Crusher

MBD061 Used 42 x 48 Telsmith Jaw Crusher, preferably with electric motor

MBD062 4¼ Symons Cone Crushers, standard and short head, with lube systems and electric motors

MBD801 Nordberg 85 , 85S, 95 or 95S Loco Track, mobile crusher

MBD802 Mobile Cone Crusher, Nordberg LT100 or LT200

MBD803 Pilot Crushtec AC 08 vertical shaft impact crusher, 160 to 200 kW electric motor

MBD804 Track mounted, 3 Ft Cone Crusher

Almal is agente vir VINDZ001 VIND betaal `n agentekommissie, aan agente wat kliënte na VIND verwys.

Z002 Om kliënte te registreer moet `n persoon X (agent van VIND) direk met VIND skakel en bevestig dat hy/sy

persoon Y na VIND gaan verwys, of alternatiewelik moet persoon Y, waneer hy/sy met VIND kontak maak,

bevestig dat hy/sy deur persoon X na VIND verwys is. Persoon X word dan `n agent van VIND en personn Y

word permanent by VIND registreer as persoon X se kliënt. Persoon X ontvang kommissie vir al die items wat

persoon Y deur die VIND stelsel verkoop. Bevestiging van verwysing word streng toegepas. Bewerings van

verwysing nadat persoon Y met VIND kontak gemaak het, sal nie in aanmerking geneem word, om `n kliënt

registreer te kry nie.

Z003 Agente kan soveel as moontlik nuwe kliënte werf en gistreer, ongeag of hulle op daardie stadium iets wil koop of verkoop. Agente kry toestemming by soveel as moontlik kliënte, dat VIND die lyste van items beskikbaar/

bonodig na die kliente mag E-pos. Die volgende besonderhede van die nuwe kliënte moet aan VIND deurgee

word, by wyse van E-pos of faks;

Z003.1 Naam en van

Z003.2 Telefoonnommer

Z003.4 E-pos adres

Z003.5 Dorp of stad waar die persoon woon

Z003.6 Die betrokke lys of lyste (Boerebedryf / Voertuie / Mynbou) wat die klient per E-pos wil ontvang

Z004 VIND sal `n register hou van kliënte wat deur agente registreer is.

Z005 Transaksies waar die adverteer van eiedom nie betrokke is nie.

Z005.1 20% Voor BTW, van die kommissie verdien deur VIND sal aan agente oorbetaal word. Kommissie is alleenlik

betaalbaar vir transaksies, waar n` agent, se kliënt goedere verkoop en waarvoor VIND kommissie

ontvang.

Z006 Transaksies waar die adverteer van eiedom betrokke is.

22

Z006.1 Om eiendom te kan adverteer, moet die adverteerder `n lid wees van die "Estate Agency Affairs Board" (EAAB).

VIND het met Mc Gregor Properties cc, ooreengekom dat eiendom in die naam van Mc Gregor Properties

adverteer mag word. As vergoeding ontvang Mc Gregor Properties cc 20% kommissie, voor BTW, van elke

transaksie. As deel van die ooreenkoms, sal Mc Gregor Properties, indien die verkoper en die koper dit verkies,

die verband en transport aktes hanteer.

Z006.2 20%Van die oorblywende 80%, voor BTW, van die kommissie verdien deur VIND, sal aan agente oorbetaal word.

Kommissie is alleenlik betaalbaar vir transaksies, waar `n agent, se kliënt goedere verkoop en

waarvoor VIND kommissie ontvang.

23

Documents

Crushing and Screeningl