Upload
manel-montesinos
View
220
Download
0
Embed Size (px)
Citation preview
8/12/2019 Diva Diag
1/6
S'tellS'tellDiagnosticDiagnosticD y n a m i c s o f Y o u r P r o j e c t s
Minimising production stoppages and reducing
maintenance costs part of our objectives as well
as important conditions for your profitability.
To meet this target, we have designed MOVISCAN, first
system associating :
local protective monitoring of machines with in situ
or remote diagnosis
Monitoring machines with steady or variable
operating conditions
A double interface : for one for Process control
(alarm status), the other one for maintenance
department (vibration data for diagnosis).
All this with an architecture dedicated to reduce
installation and cabling costs.
More than a new monitoring spectrum. MOVISCAN is a
new monitoring concept.
MOVISCAN
AUTOMATIC
DATA COLLECTION
CONTINUOUS
MONITORING
REMOTE
DIAGNOSTIC
8/12/2019 Diva Diag
2/6
MOVISCAN is a unique system designed
to monitor your machines automaticallyand provide pertinent information to
maintenance personnel on their status :
A SINGLE CABLE :
3 uses :
Continuous monitoring
Automatic datacollection
Remote diagnostic
HIGH-PERFORMANCE
AND USER-FRIENDLY :
MOVISCAN uses high-technology components
enabling to monitor and analyze complex
machinery : spectrum, envelope, Kurtosis, synchro-
nous analysis, etc.
MOVISCAN is equipped with an RS232 or
RS485 interface for local operation and a
modem link for remote operation
A single software application, the DIVADIAG,
is used for MOVISCAN configuration, machine
monitoring, data storage, trend analysis anddiagnostics.
EASY AND ECONOMICAL
TO INSTALL :
the system's architecture minimizes the length of
the sensor/MOVISCAN cables via the use of :
eight-channel SCANBOX multiplexers
connected to the sensors installed on the
machines to be monitored
a SCANBUS bus enabling sensor signals to
be relayed to the MOVISCAN
8/12/2019 Diva Diag
3/6
D E S I G N E D T O C O N T R O LCOMPLEX MACHINES
8 command inputs enable machine operating
conditions to be taken into account automatically ;
as the system is entirely automatic, it must be
capable of taking into account machine operating
conditions :
in order to manage monitoring tasks efficiently
(the system's resources are entirely dedicated
to operating machines and ignore machines
which are not in operation)
in order to analyze data, as machine operating
conditions are often essential to a reliable
diagnostic.
8 Trigger for synchronous analysis
Multiplexing bus interface enabling the
connection of up to 128 sensors using a single
cable
4 relays are triggered in case of alarm or
monitoring system defect
Modem Link for remote dialog with a DIVADIAG
control and analysis station (remote diagnostic).
1
8
SCANBUS
FLEXIBILITY
Each MOVISCAN can carry out differentfunctions according to how its is pro-
grammed by DIVADIAG software :
Continuous monitoring : MOVISCAN scans all
the sensors continuously and computes the
parameters of the defects to be monitored
(unbalance, alignment, gear meshing, bearings,
etc.). If the tolerated thresholds are reached, the
monitoring parameter values are sent to the PC
and the alarm or danger relays may be triggered
Automatic data collection : further to anautomatic request sent by the PC, data such as
overall vibration level, spectrum etc. are sent to
the DIVADIAG software for trend follow-up and
analysis
Remote diagnostic : periodic measurements
can be programmed at any time if additional
information is required for a diagnostic. These
measurements intervene momentarily in the
continuous monitoring cycle.
HIGH-PERFORMANCE
Multiprocessor structure : MOVISCAN is designed
around a PC which manages the various data
transmission and management tasks, associated
with a special processor for signal acquisition
and processing
Measurements are accurate thanks to the 16-
bit analog-to-digital converter and the 32-bit
floating-point digital signal processor.
SCANBOX
SCANBOX
SCAN
BOX
8/12/2019 Diva Diag
4/6
EASY AND ECONOMICAL
TO INSTALLThe MOVISCAN's structure makes for easy
ins tal lat ion : a single SCANBUS cable enables
the connection of up to 16 SCANBOX multiplexers
per MOVISCAN. By placing the multiplexers near
the machines, wiring costs are reduced. In
addition, as the multiplexers and accelerometers
are supplied by the same SCANBUS cable, no
power supply source is required near the
machines.
USER-FRIENDLY
The data measured is analyzed using the DIVADIAG
software. Its user-friendly interface enables easy
access to the various configuration, monitoring,
trend analysis and diagnostic functions.
DIVADIAG is also compatible with portable data
collectors for the monitoring of less strategic
machines. It also enables oil-analysis result
management. You can also choose to carry out
multi-technique monitoring of your entire machinepark using the same tool and the same database.
The telephone modem link enables analysis data
from several MOVISCAN modules to be sent to
your vibration analysis center, at any location.
The monitored information is also available locally
via front panel leds, relay outputs and an
RS485/Modbus link with Process Control.
A COMPLETE SET OF SERVICESAT YOUR DISPOSAL
In order to optimize the operation and benefits to
be gained from your application, S'tell Diagnostic
offers a whole range of complementary services :
Definition of monitoring (measurement points,
etc.)
System installation and start-up
System installation and start-up
Customer Hotline.
8 TOR
inputs
(operating
conditions)
8 Trigger
inputs
(synchronous
acquisition,
rotation
speed)
Modemto
DIVADIAG
RS232, RS485to
Process Control
or DIVADIAG
DIVADIAG SOFTWAREAPPLICATION Programming
Monitoring
Trend analysis Diagnostic
SCANBOX
DI V AD I AG
8/12/2019 Diva Diag
5/6
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ;
; ; ; ; ; ;
; ; ; ; ; ;
; ; ; ; ; ;
; ; ; ; ; ;
; ; ; ; ;
; ; ; ; ;
; ; ; ; ;
; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ; ; ;
; ; ; ; ; ; ;
; ; ; ; ; ; ;
; ; ; ; ; ; ;
; ; ; ; ; ; ;
; ; ; ;
; ; ; ;
; ; ; ;
; ; ; ;
; ; ; ;
; ; ; ;
; ; ; ;
EXAMPLES OF
APPLICATIONS
PAPER MANUFACTURING :
Monitoring of paper machine using acce-
lerometers and temperature sensors located
at strategic points (press, drying rollers, etc.).
Advantages offered by MOVISCAN :
- measurements always done in identical
conditions (e.g. speed), thereby facili-tating diagnostic
- placing SCANBOXES near the
machine minimizes wiring and
installation costs
- use of envelope detection for
low-speed roller diagnostic.
CLOSE-PROXIMITYSENSORS
ACCELEROMETERS
TRIGGER
TACHOMETERS
LOAD
TEMPERATURE
OFFSHORE
ENVIRONMENT :
Monitoring of platform machinery and
automated local protection by alarms
Measurement transmission to remote PC via a
modem link for trend follow-up and diagnostic.
Advantages offered by MOVISCAN :
this application requires no investments in
computer hardware and no on-site
diagnostic skills.
SCAN
BOX
}
8/12/2019 Diva Diag
6/6
HEADQUARTERS
565, rue de Sans-SouciF-69760 - LIMONEST
FRANCETl. 33/(0)4 72 20 91 00Fax 33/(0)4 72 20 91 01
E-mail : [email protected]
S'tellS'tellDiagnosticDiagnostic
M O V I S C A N
GENERAL SPECIFICATIONS
MULTIPLEXERS (SCANBOXES) :
Max. number of SCANBOXES per MOVISCAN : 16 Number of inputs per MOVISCAN : 8 Max. number of inputs on SCANBUS multiplexingbus : 128 Input types :
integrated-circuit accelerometer with sensorpower supply via 4mA constant dynamic current :+3V, low frequency limit : 0.2 Hz dynamic voltage signal : +5V, +10 V DC voltage signal : 0-5 or 0-10 V direct current signal : 0-10 or 0-20 mA(MOVISCAN VI.2, 4-20 mA)
Multiplexing bus max. length : 500 m
Dimensions : 107 x 167 x 270 mm Weight : 0.8 Kg Operating temperature : -10C to 50C Protection : IP55 Humidity : 90% without condensation
MOVISCAN :
MEMORY : 1 MB dynamic RAM, 1 MB static RAM. 1 MB Flashmemory for program storage with update bydownloading
DIGITAL SIGNAL PROCESSOR : 33 Mflop 32-bit floating point DSP. (Insignificant
interference due to digital processing)
ACQUISITION : 16-bit converter (dynamics 96 dB) Anti aliasing filter
OVERALL VIBRATION LEVEL MEASUREMENT : Filters : High-pass (0, 2, 10, 3000 Hz) ; Low-pass (300,1000, 2000, 3000, 20000 Hz) Velocity 10-1000 Hz (rotating machine standardsVDI2056, NFE90100, ISO2954) 2 - 300 Hz (reciprocating machine standard VDI2063) Detection : rms, true or equivalent peak, true orequivalent peak-to-peak Integration : 0, 1 or 2 times for acceleration, velocity
and displacement measurements Programmable acquisition time Bearing option : defect factor 0 to 12
ROTATION SPEED : DC input on SCANBOX Trigger input on MOVISCAN
PROCESS CONTROL : DC voltage or current input on SCANBOX
SPECTRUM ANALYSIS : Number of lines : 200, 400, 800, 1600 and 3200 Frequency bands (Hz) : 20K, 10K, 5K, 2K, 1K, 500,200, 100, 50, 20, 10, 5, 2, 1, 0, 0.5
T
hespecificationsinthisdocumentaresubjecttochangewithoutnotice-05/99-FPMCMT111ARevA-FOU
RMISBLEUESAdvertising:33/(0)680666337
True zoom : x 1, 2, 4, 8, 16, 32, 64, 128 Averaging : 1 to 4096 exponential, linear or peak Overlap-rate : 0, 50, 75%
Real-time : up to 20 kHz Windowing : Rectangular, Hanning, Flat-top Synchronous analysis : triggering of analyzedsignal or Trigger. Post or pre-triggering on positive ornegative stape Envelope : signal spectrum demodulated inbandpass (width = 1/2 to 1/128 around centralfrequency) Monitoring of levels recomputed from spectrum(peak or RMS)
INPUTS-OUTPUTS : 8 Trigger inputs for rotation speed measurementor synchronous analysis 8 command inputs for operating condition moni-
toring Multiplexing bus interface 4 relays : IRT, 5 A 250 V rated Modbus RS232 or RS485 for local link with DIVADIAGor process Control Modem interface for remote links with DIVADIAG
MACHINE PROTECTION AS REGARDS : Overall vibration level Process data Levels recomputed from spectrum (peak or RMS) Alarms : 3 thresholds (Error, Alarm, Danger) Automatic or manual alarm reset 1 alarm relay, 1 danger relay
PHYSICAL SPECIFICATIONS : IP55 painted steel case Dimensions : 380 x 380 x 210 mm Poids : 17,5 Kg Operating temperature : -10C to 50C Humidity : 90% without condensation
CABLES :
SCANBUS multiplexing bus cable : power supply of SCANBOX multiplexers and
built-in electronic accelerometers (no powersupply source required near machines)
transmission of MOVISCAN commands toSCANBOXES
transmission of measurement signals
Multiplexing bus max. length: 500 m SCANBOX / sensor max. length: 60 m (+30 g peak,Fmax=20 kHz).
We b : ht tp :/ /w ww.s te ll di ag no st ic .f r