Upload
trinhnhan
View
261
Download
0
Embed Size (px)
Citation preview
The Energy-saving and Emission-reduction Technology Theme Display Appendix 1
MTM Expo 2013
SPACE APPLICATION / CONTRACT Please complete and return to Shenshi Exhibition Service Co., Ltd.
Tel: +86-21-5283 8700 ext. 815 Fax: +86-21- 5250 0721 E-mail: [email protected]
Company:
Address: :
Authorised Official’s Name: Ms. Mr. Position:
Tel: Fax: Email:
Details of product to be exhibited: Metallurgy Tube Metal Foundry
Please choose (√ ):
Shell Scheme Booth: min 12 sqm (*surcharge for corner booth) Booth no.
US$4,600 per booth with 12㎡(3 x 4m)
US$6,900 per booth with 18 ㎡(3m×6m)
Shell scheme booth: 3 walls panel, 1 carpet, 1 round table, 3 leather chairs,
1bin
1 reception counter, 1 bar chair, 1 company name panel, 2 spot lights, 1
socket.
Indoor Raw Space: min. 24 sqm, Booth rental: USD 350 per sqm
US$350 per sqm with Width m × Depth m
=US$ (Min.24sqm)
Importance:This form must be signed by a person authorized on behalf of the company.
We, the undersigned, confirm to participate in MTM Expo to be held from June 4-6, 2013.
We also confirm having read and agree to the terms and conditions of the contract as well
as the rules and regulations specified in the exhibition manuals. All rental payment is
non-refundable.
Terms of payment:
1. 50% of deposit in USD of the booth fee must be made to our company and returned
together with the completed application form. The balance payment must be paid in full
three months before the exhibition date.
2. Only upon receiving the non-refundable down payment (50% of the total rental), this
reservation is valid within 5 working days after receiving our confirmation.
3. Bank Details:
Company name: Shanghai Shenshi Exhibition Service Co., Ltd.
Bank: Industrial and Commercial Bank of China
Shanghai Branch (022472), Jinshajiang Road, Shanghai, China
Account: 1001 2472 0901 6228556 Swift code: ICBKCNBJSHI
Stamp/Authorized Signature:______________ Name:______________ Date:_________
The Energy-saving and Emission-reduction Technology Theme Display Appendix 2
Briefing of Exhibiting Product / Technology
Product/Technology
Product/Technology(CN)
Category Index (Please refer to Appendix 2.1 “Category of Energy-
saving and Emission-reduction Technology)
Introduction
Please brief the working principle and application condition of the Product/Technology
Effect of energy-saving and emission-reduction
Please introduce effect of energy-saving and emission-reduction of the Product/Technology and list related
technology index (must be measurable)
Application briefing
Please introduce application of the Product/Technology, e.g. case study, enterprises using the
Product/Technology.
Exhibitor
Contact
Details
Contact
Person E-mail
Mobile Tel Fax
Address
P.C.
The Energy-saving and Emission-reduction Technology Theme Display Appendix 2.1
Category of Energy-saving and Emission-reduction Technology
Coke
Making (A)
Sinter
(B)
Iron
Making
(C)
Iron
Making
(D)
Steel
Rolling
(E)
Others
(F)
Subto
tal
(item)
Remarks
Energy
-saving
Energy
efficiency
upgrading
A1
10
B1
8
C1
4
D1
0
E1
6
F1
1
29
i.e:high efficient
combustion,high
efficient heat
exchangers and
etc.
Residue
energy
recycling
A2
1
B2
8
C2
3
D2
4
E2
5
F2
0
21
i.e: CDQ power
generation,TRT,fu
me residue heat
recycling, melt
slag waste heat
recycling
Process
energy
saving and
new energy
application
A3
1
B3
1
C3
4
D3
4
E3
4
F3
0
14
i.e.: hot charging
and hot
transferring,
thin-strip
casting,BF coal
injection
Emission-r
eduction
Air pollutants
reduction
A4
9
B4
14
C4
5
D4
7
E4
6
F4
1
42
Emission reduction
for SO2, NOx,
fume dusts, dioxin
and etc.
Water saving
and water
pollution
treatment
A5
5
B5
1
C5
1
D5
4
E5
4
F5
1
16
i.e. coke and cold
rolling waste
water treatment
and reclaimed
water recycling
and etc.
Solid waste
utilization
A6
4
B6
5
C6
4
D6
11
E6
3
F6
1
28
Reusing and high
value added
recycling
technology for
each kind of solid
wastes
Information and
Automation
A7
0
B7
0
C7
0
D7
4
E7
2
F7
2
8
i.e.:energy control
center tech.,
environment auto
monitoring tech.
Subtotal 30 37 21 34 30 6 Total 158
Process
Category
Technolog
y
Instruction 1.The classification number table is convenient for technology index searching and archiving management;
2.Technical classification number consists of one letter and one digital, letter representing processes and the
digital representing energy saving & emission reduction technology. For example, CDQ power generation
process belongs to residue heat recycling from the coking process, therefore it is classified in A2; cold-rolling
wastewater treatment technology is classified in E5, Energy Center Technology is classified in F7;
3.For technology with multiple energy saving and emission reduction effects, it is classified by its main energy
saving effect, such as CDQ technology, with both energy saving and water conservation effects, but also with
pollutant emissions reduction effect, but since its energy-saving effect is more significant, and it is accordingly
classified in the energy-saving technology
4.In process classification, some enterprises do not separate the coking making from coking, so here they are
grouped together; refining and continuous casting are unified in the steel-making process; hot-rolling,
cold-rolling, strip steel, steel pipes, wire rod are unified in the rolling process; common technology is classified in
the others.
1'' 炼焦过程中焦炉变压调节Variable pressure regulation of ovens during the coking
process
17'' 推焦除尘Emission reduction during coke pushing
2'' 焦炉的状态维护Maintenance of coke ovens
18'' 低水分湿法熄焦工艺Coke wet quenching (CWQ)
3'' 清扫炉门和炉门框密封Cleaning of oven doors and frame seals
19'' NOx源头消减技术Reduction of NOX by primary measures
4'' 焦化厂平稳而无干扰的操作Smooth and undisturbed operation the coke oven plant
20'' NOx末端治理技术Reduction of NOX by secondary measures
5'' 保持炭化室内气流畅通Maintaining free gas flow in the coke oven
21'' 焦炉煤气脱硫Reduction of SO2 by coke oven gas desulphurization
6'' 炉门及炉门框密封性的改进Improvement of oven door and frame seals
22'' 氨的去除(焦化废水预处理技术)Ammonia stripping from wastewater
7'' 提高炭化室体积Larger coke oven chambers
23'' 焦油和多环芳香烃(PAH)的去除(焦化废水预处理技术)Removal of tar(and PHA)from wastewater
8'' 上升管和装煤孔密封Sealing of ascension pipes and charging holes
24'' 一级反硝化(焦化废水处理技术)Primary nitrification-dentrification process
9'' 新的防泄漏炉门Modern Leak-proof Door
25'' 二级反硝化(焦化废水处理技术)Secondary nitrification-denitrification process
10'' 煤调湿Coal Moisture Control
26'' 活性炭吸附(焦化废水处理技术)Adsorption of activated carbon
A2
1项
11'' 干熄焦Coke Dry Quenching
27'' 焦油渣配煤炼焦Coking of Tar Residue Blended with Coal
A3
1项
12'' 新一代炼焦技术SCOPE21
28'' 两级离心处理焦油渣Two- stage centrifugal treatment of Tar Residue
13'' 高压氨液吸除系统High Pressure Ammonia Liquor Aspiration System
29'' 除尘焦粉用于高炉喷吹Application of Coke Breeze in Coal Injection of Blast Furnaces
14'' 推焦除尘及处理系统Dedusting of Coke Pushing
30'' 焦炉处理废塑料Utilzation of waste plasties by coking process
15'' 焦炉煤气处理的气密性操作Gas-tight operation of the gas treatment plant
16'' 闭式传送带Closed belt conveyors
序号No.
分类Category
A1
10项
A4
9项
序号No.
技术名称 / Technology
A: 炼焦及焦化 Coke Making
附件2.2 钢铁企业节能减排技术一览表(分类编号请参照附件2.1)
Appendix 2.2 Overview of Energy-saving and Emission-reduction Technology
分类Category
A5
5项
A4
9项
The Energy-saving and Emission-reduction Technology Theme Display
Appendix 2.2
A6
4项
技术名称 / Technology
序号No.
分类Category
序号No.
技术名称 / Technology
附件2.2 钢铁企业节能减排技术一览表(分类编号请参照附件2.1)
Appendix 2.2 Overview of Energy-saving and Emission-reduction Technology
分类Category
技术名称 / Technology
31'' 点火装置多缝式烧嘴Multi-slit Burner in Ignition Furnace
45'' 烧结矿冷却热空气余热回收用来区域供热District Heating Using Waste Heat
32'' 在烧结矿配料中减少易挥发的碳氢化合物的含量Loweringthe content of volatile hydrocarbons in the sinter feed
46'' 烧结矿冷却热空气和烧结烟气混合再循环(EPOSINT工艺)
recycling of waste gas from part of the end sinter strand and use of waste
gas from the sinter cooler
33'' 铺底料技术Sintering with Bedding material
B3
1项
47'' 生物质燃料在烧结上的应用Biomass for Iron and Steel Making
34'' 厚料层烧结Deep bed sintering
48'' 减少烧结矿来料中的硫含量Lowering the content of sulfure insintering feed.
35'' 球团矿原材料分离技术segregation of raw materials on pellets
49'' 机头高效静电除尘器High-efficiency Electrical Percipitator of sinter strand
36'' 脱硫后提高烧结矿里的煤配比Increased of coal content in sintering feed after FGD
50'' 粗颗粒旋风除尘器Cyclones
37'' 烧结喂料系统改进Improvements in feeding equipment
51'' 机尾烟气袋式除尘技术Bag filter
38'' 粒化加强装置Equipment of reinforce granulation
52'' 湿法烟气脱硫技术Wet FGD
39'' 烧结台车上集成冷却和部分烟气循环余热回收strand cooling and waste heat recovery with partial waste gas
recirculation
53'' 干法(半干法)烟气脱硫技术Circulating fluid-bed de-sulf technogy for sinter
40'' 结合换热器的烧结后段烟气循环利用(LEEP)Recycling of waste gas from the end sinter strand combined
with heat exchange
54'' 低温等离子体法处理烧结烟气Exhaust Gas Treatment through Low-Temperature Plasma
41'' 不同烧结段烟气再循环的工艺Recycling of parts of waste gas to other parts of the sinter
strand
55'' 选择性催化还原法脱硝Selective catalytic reduction (SCR)
42'' 部分循环整个烧结机的烟气(EOS)Partial recycling of waste gas from the whole strand
56'' 活性炭吸附脱硝技术Regenerative activated carbon (RAC) process for desulphurisation and
reduction of NOX
43'' 烧结矿冷却热空气和烧结烟气余热回收及部分烧结烟气再循环sinter cooler and waste gas heat recovery with sectional waste
gas recirculation
57'' 原料优化配比、降低烧结过程SO2减排技术
Primary measures for reduced SO2 emissions from the sinter process
44'' 烧结矿冷却热空气的余热回收sinter cooler waste heat recovery with conventional sintering
58'' PCDD/F排放最小化的流程优化Process optimisation
for PCDD/F emission reduction
B1
8项
B4
14项
B2
8项
B2
8项
B: 烧结及球团 Sinter
序号No.
分类Category
序号No.
技术名称 / Technology
附件2.2 钢铁企业节能减排技术一览表(分类编号请参照附件2.1)
Appendix 2.2 Overview of Energy-saving and Emission-reduction Technology
分类Category
技术名称 / Technology
59'' 湿式洗涤器Fine wet scrubbers
60'' 溢流水串级使用或外排The use of backed-up water and discharge
75'' 熔融还原工艺Smelting reduction process
61'' 采用絮凝沉淀、浓缩处理Coagulation and concentration treatment of wastewater
76'' 直接还原工艺Smelting Reduction Processes
B5
1项
62'' 底流污泥可返回烧结配料综合利用Recycle sludge containing iron and carbon from the sinter
strand
77'' ITmk3 炼铁工艺Direct Reduction Process
63'' 多种尘泥均质化造粒回烧结Use of dust and sludge in the sinter plant
78'' 双向直缸炉炼铁ITmk3 Ironmaking Process
64'' 烧结车间粉尘压块后Oxycup处理Utiilization of sintering mill dust in Oxycup shaft furnace
proceess aftering briquetting
79'' 出铁场除尘系统Cast house dedusting
65'' 高含氯除尘灰的洗氯预处理washing pre-treatment of BF dust with high content chlorine
80'' 高炉渣恶臭治理技术Slag Odor Control
66'' 烧结电场除尘灰的脱除钾钠处理De- Alkali Metal treatment of sintering EP dust
81'' 铁水装料烟尘抑制技术Fume suppression during hot metal charging
67'' OG泥泵送喷浆回收OG sludge direct recovery in the first mixer of sintering plant
82'' 炉顶料斗煤气回收系统Gas recovery system for top hopper release
83'' 高炉渣处理过程臭味控制Slag Odor Control
68'' 直接喷吹还原剂Direct injection of reducing agents
C5
1项
84'' 高炉煤气洗涤水的处理Treatment and reuse of scrubbing water
69'' 提高高炉能源效率Increase of energy efficiency in blast furnaces
85'' 高炉泥渣的水力旋流Hydrocyclonage of blast furnace sludge
70'' 改进高炉装料Improve Blast Furnace Charge Distribution
86'' 高炉渣的海洋应用BF slag marine application
71'' 高炉煤气除尘Blast furnace gas treatment
87'' 高炉渣和脱硅渣制取硅钾肥BF slag or desiliconized slag used to formulate Slow-Release Silicon-
Potash Fertilizer
72'' 高炉余热回收利用Blast Furnace Heat Recuperation
88'' 高炉渣用作水泥(混凝土)的活性材(掺和料)BF slag used as composite cement or concrete admixture
73'' 回收利用高炉煤气Recovery and use of blast furnace gas
74'' 高炉煤气余压发电Top Pressure Recovery Turbine-- TRT
C1
4项
C2
3项
C6
4项
C4
5项
C: 炼铁 Iron Making
C: 炼铁 Iron Making
C3
4项
B4
14项
B6
5项
序号No.
分类Category
序号No.
技术名称 / Technology
附件2.2 钢铁企业节能减排技术一览表(分类编号请参照附件2.1)
Appendix 2.2 Overview of Energy-saving and Emission-reduction Technology
分类Category
技术名称 / Technology
89“ 转炉煤气(燃烧系统)冷却系统Control and automization of converter operation
104“ 闭环冷却水系统(电炉)Slap slitting
90“ 转炉煤气能量的回收Energy recovery from the BOF gas
105“ 转炉炼钢湿法除尘废水和浓缩液处理Coagulation and concentration treatment of wastewater from wet
dedusting91“ 废钢预热Scrap preheating
106“ 采用沙滤装置处理连铸废水A high rate of recirculation along with filtration
92“ OG-锅炉系统(非燃烧系统)/干式旋风除尘器OG-boiler System (Non-combustion)/ Dry-type Cyclone Dust
Catcher
107“ 采用密闭水冷系统冷却电炉组成元件Cooled with water in a closed circuit of the slabs,blooms and billet
93“ 转炉直接出钢Laser contouring system to extend the lifetime of BOF
refractory lining
108“ 降低废钢中的锌含量Lowering the zinc content of scrap
94“ 富氧燃料烧嘴/氧枪Oxy-fule burners/Lancing
109“ 转炉除尘灰冷压块Cold briquetting of BOF dust and sludge
95“ 近终型连铸技术—薄带连铸Optimised Skid Design to Reduce Skid Marks
110“ 富Zn泥浆/粉尘的处理Treatment of dust or sludge with high content of Zinc
96“ 近终形异型坯浇铸技术Near Net Shape Casting / Thin Slab Casting
111“ 粉尘热压块和再循环及回收高Zn浓缩球团作外部重新应用Dust hot briquetting and recycling with recovery of high zinc concentrated
pellets for external re-use
97“ BOF集尘罩Use Enclosures for BOF
112“ 电炉渣利用EAF slag application
98“ 废气冷却系统(燃烧系统)Exhaust Gas Cooling System (Combustion System)
113“ EAF粉尘再循环利用EAF dust processing for the recovery of heavy metals
99“ 布袋除尘器前喷射吸附剂脱除废气中的有机物Reduction of PCDD/F by means of additives injection in
combination with bag filters
114“ 高合金电炉渣处理Treatment of high alloyed EAF slags
100“ 铁水预处理除尘Particulate matter abatement from hot metal pretreatment
115“ OxyCup竖炉技术OxyCup Shaft Furnace
101“ 转炉一次除尘Primary dedusting of BOF
116“ 转炉钢渣的热态调质改性Adjustment of free lime content of BOF slag
102“ 转炉二次除尘Collection and abatement of secondary emissions of BOF
117“ 钢渣的海洋应用Steel slag marine application
103“ 减少转炉二次烟尘排放的通用技术General techniques prevent or reduce diffuse and fugitive
secondary emissions
118“ 滚筒渣(BSSF)处理技术BSSF—Baosteel’s innovative process for steelmaking slag treatment
D2
4项
D3
4项
D4
7项
D5
4项
D6
11项
D: 炼钢 Steel Making
序号No.
分类Category
序号No.
技术名称 / Technology
附件2.2 钢铁企业节能减排技术一览表(分类编号请参照附件2.1)
Appendix 2.2 Overview of Energy-saving and Emission-reduction Technology
分类Category
技术名称 / Technology
134” 加热炉富氧燃烧技术Oxygen - enriched combustion of heating furnace
119“ MultiGasTM烟气分析仪—高效燃烧的在线反馈MultiGasTM Analyzer - On-line Feedback for Efficient
Combustion
135” 热装热送Hot Charging/Direct Rolling
120“ 用于真空脱气装置实时钢液测温的副枪成像系统ProVision Lance-based Camera System for Vacuum
Degasser - Real-time
136” 在线热处理技术(加速冷却)Strip Edge Heating
121“ 通过自动化提高转炉车间能源效率Increase energy efficiency in the steel shop by automatisation
137” 强制中间机座带钢冷却系统Forced Interstand strip cooling
122“ VIPER温度监控系统VIPER temperature monitoring system
138” 低NOX烧嘴Low-NOx Burners
139” 外部烟气循环External Flue Gas Recirculation (FGR)
123” 减少物料传送机构的热损失Reduction of Energy Loss through Stock Transportation
Device
140” 减少加热炉烟尘无组织排放/氧化物颗粒脱除系统Reduction of Fugitive Emissions / Oxide Removal System
124” 热量存储箱和防散热盖Heat conversation box and Thermal cover
141” 矫直机除尘Leveler dedusting
125” 热卷箱Coil box
142” 加热炉烟气选择性催化还原技术(SCR)Selective catalytic reactor (SCR)
126” 热卷保温炉Coil recover furnace
143” 加热炉烟气选择性非催化还原技术(SNCR)Selective Non-Catalytic Reduction (SNCR)
127” 传输车加上罩盖Heat Shields on Transfer Tables
144” 工艺水中碳氢化合物污染防治技术Abatement of hydrocarbon in process waste discharge
128” 工作辊润滑系统Work roll lubrication system
145” 减少水的消耗与排放Reduction of water consumption and discharge
129” 蓄热式燃烧Regenerative Burner System
146” 含油含屑废水的处理Treatment of scale and oil bearing process water
130” 自蓄热式烧嘴Recuperator and Recuperative Burners
147” 冷却水的处理Cooling water treatment
131” 待轧坯预热Feedstock Preheating
148” 蒸馏回收废油渣中的氧化铁粉和油Recovery oxided iron powder and oil from hot mill residues containing
oill by distillation
132” 加热炉烟气余热锅炉Heat Recovery steam generator for heating furnace flue
149” 氧化铁皮制取还原铁粉Preparation of reduced iron powder from Mill scale
133” 加热炉滑轨蒸发冷却Evaporative Furnace Skid Cooling
150” 氧化铁皮生产磁性材料Preparation of magnetic material from Mill scale
E2
5项
D7
4项
E4
6项
E1
6项
E5
4项
E6
3项
E3
4项D: 炼钢 Steel Making
E: 轧钢 Steel Rolling
序号No.
分类Category
序号No.
技术名称 / Technology
附件2.2 钢铁企业节能减排技术一览表(分类编号请参照附件2.1)
Appendix 2.2 Overview of Energy-saving and Emission-reduction Technology
分类Category
技术名称 / Technology
151” 提高能效的通用方法和低排放操作(加热炉和热处理炉)Rolling of Wedge-type Slabs
F1
1项
153” 区域能源综合利用解决方案Optimized solution of regional intergration of energy sources
152” 工业炉自动控制General Measures for Energy Efficiency and Low Emission
Operation
F4
1项
154” 堆场、物流运输抑尘技术Dust suppressing technology for stockyard and conveyors
F5
1项
155” 全厂水循环梯级利用Cascade use of process water
F6
1项
156” 含铁尘泥返生产及综合利用Cycling and Reuse of Ferrous dust & ooze
157” 能源管理中心Energy management and control center
158” 新型特征污染物监测技术Monitoring and appraisement of charactrized pollutants
F7
2项
E7
2项
E: 轧钢 Steel Rolling F: 能源公辅及其他 Others