8
EcoGuard TS1001 Sensor för mätning av inomhustemperatur, uppkopplat med EcoGuard Wireless. EcoGuard AB, Elementvägen 14, 702 27 Örebro, 019 - 25 21 00, [email protected] KOMMUNIKATION Sensorn sänder mätvärden med trådlös kommunikation. Insamling sker kontinuerligt via EcoGuard Air Receiver [Centralenhet]. Mätdata skickas till CURVES CLOUD för visualisering. Skall sensorn monteras i källare, rådgör med EcoGuard för bästa räckvidd. INSTALLATION Installation kan utföras av EcoGuards personal eller samarbetspartner. Vill du göra det själv eller med andra underleverantörer är vi delaktiga i projektet medan det fysiska montaget utförs av din personal. LEVERANS Sensorn levereras med fäste för väggmontage. 2 3 1 1. Trådlösa mätare för t.ex temperatur, vatten, fukt, energi och el 2. Air Receiver, insamlingsenhet i trapphus 3. Uppkoppling till CURVES CLOUD (3) via GPRS eller Ethernet 4. Navigator - För export av medeltemp till DUC via t.ex Modbus över IP/Ethernet eller RS485 4 DUC IMD EcoGuard Wireless

EcoGuard TS1001

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: EcoGuard TS1001

EcoGuard TS1001Sensor för mätning av inomhustemperatur, uppkopplat med EcoGuard Wireless.

EcoGuard AB, Elementvägen 14, 702 27 Örebro, 019 - 25 21 00, [email protected]

KOMMUNIKATIONSensorn sänder mätvärden med trådlös kommunikation.Insamling sker kontinuerligt via EcoGuard Air Receiver [Centralenhet].Mätdata skickas till CURVES CLOUD för visualisering.Skall sensorn monteras i källare, rådgör med EcoGuard för bästa räckvidd.

INSTALLATIONInstallation kan utföras av EcoGuards personal eller samarbetspartner. Vill du göra det själv eller med andra underleverantörer är vi delaktiga i projektet medan det fysiska montaget utförs av din personal.

LEVERANSSensorn levereras med fäste för väggmontage.

2

3

1

1. Trådlösa mätare för t.ex temperatur, vatten, fukt, energi och el

2. Air Receiver, insamlingsenhet i trapphus

3. Uppkoppling till CURVES CLOUD (3) via GPRS eller Ethernet

4. Navigator - För export av medeltemp till DUC via t.ex Modbus

över IP/Ethernet eller RS485

4

DUC IMD

EcoGuard Wireless

Page 2: EcoGuard TS1001

TEKNISK SPECIFIKATION

EcoGuard TS1001

Produkt Kapslingsklass: IP20

Storlek : 90 x 44 x 19 mm (höjd, bredd, djup)

Färg: Vit

Monteringsmetod: Skruv

Elektrisk anslutning Matningsspänning: Batteri, uppskattad livslängd 20 år

Miljö Omgivningstemperatur: +10 till +50˚C

Upplösning: 0,5 ˚C i området 10-50 ˚C / 0,1 ˚C i området 15-30 ˚C

Användningsmiljö: Inomhus

Höjd över havet (drift): 0-2000 meter

Lufttryck: 900–1100 mbar

Felmarginal Inom: 15-26˚C ≤ +/- 0,15 °CUtanför: 15-26˚C ≤ +/- 0,50˚C

Kommunikation Mätintervall: 15 min

Sändintervall: 60 min

Radio, Frekvensband: 433,050–434,790 MHzModulationsmetod: GFSK

Godkännanden CE

EcoGuard AB, Elementvägen 14, 702 27 Örebro, 019 - 25 21 00, [email protected]

Version: 1.0

Page 3: EcoGuard TS1001

KALIBRERINGSBEVIS

utfärdat av riksmätplats 01 CALIBRATION CERTIFICATE issued by a Swedish National Laboratory Contact person Date Page

Lars-Erik Josefson 2014-03-27 1 (3) Measurement Technology +46 10 516 54 56 [email protected]

Reference

MTv4F006969-K01

EcoGuard AB Hammarbacken 4A 191 49 SOLLENTUNA

Calibration of temperature logger

SP Technical Research Institute of Sweden

Postal address Office location Phone / Fax / E-mail National Laboratories are designated by the Swedish Government according to the Act (2011:791) and the Decree (2011:811) concerning testing and metrology. SP operates under ISO 17025, supervised by SWEDAC. This document may not be reproduced other than in full, except with the prior written approval of SP.

SP Box 857 SE-501 15 BORÅS Sweden

Västeråsen Brinellgatan 4 SE-504 62 BORÅS

+46 10 516 50 00 +46 33 13 55 02 [email protected]

Identification Object 25 temperature loggers Ecoguard model TS-020000,

identification se table of results. Object state Upon arrival the objects had no visual damages. Calibration location The National Laboratory for Temperature, SP, Borås, Sweden Calibration date March 25, 2014

Measurement methods and procedures Comparison in liquid baths with one of the resistance thermometers of SP according to SP-Method 2876. The loggers were protected from contact with the fluid of the bath during the calibration. The temperature loggers registered the temperature in the bath for at least 4 hours at each temperature. The measurement results are presented in the form of mean values in the table. A central Unit CE-015110 and web interface Sensor Reading Report Generator was used for reading the loggers. The temperature loggers were not adjusted before the calibration. According to data from the customer are the calibrated temperature loggers manufactured in year 2014, week 10. Also according to customer the loggers are collected randomly from production without any kind of selection

Measurement conditions Temperature scale ITS-90

Results Results and expanded uncertainty of the calibration are presented in the form of a table on page 2.

Page 4: EcoGuard TS1001

KALIBRERINGSBEVIS CALIBRATION CERTIFICATE

Date Page

2014-03-27 2 (3) Reference

MTv4F006969-K01

SP Technical Research Institute of Sweden

Table of results

EcoGuard model TS-020000

Serial no. Correction Correction Correction Expanded

at 16 °C at 21 °C at 26 °C Uncertainty

°C °C °C °C

131670 0.1 0.1 0.1 ±0.15 131675 0.1 0.1 0.0 ±0.15 131676 0.1 0.0 0.0 ±0.15 131881 0.1 0.0 0.1 ±0.15 131882 0.1 0.1 0.1 ±0.15 131883 0.1 0.0 0.0 ±0.15 131884 0.1 0.0 0.1 ±0.15 131885 0.1 0.0 0.0 ±0.15 131886 0.0 0.0 0.0 ±0.15 131887 0.1 0.0 0.1 ±0.15 131888 0.0 0.0 0.0 ±0.15 131889 0.1 0.1 0.0 ±0.15 131902 0.1 0.1 0.1 ±0.15 131904 0.0 0.0 0.0 ±0.15 131906 0.1 0.0 0.0 ±0.15 131907 0.0 0.0 0.0 ±0.15 131909 0.1 0.0 0.0 ±0.15 131971 0.1 0.1 0.1 ±0.15 131975 0.1 0.1 0.1 ±0.15 131976 0.1 0.0 0.0 ±0.15 131977 0.1 0.1 0.0 ±0.15 131978 0.1 0.1 0.0 ±0.15 131979 0.1 0.1 0.0 ±0.15 131980 0.1 0.1 0.1 ±0.15 131988 0.0 0.1 0.0 ±0.15

True temperature = instrument reading + correction Uncertainty The reported expanded uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k = 2, which for a normal distribution corresponds to a coverage probability of approximately 95%. The standard uncertainty has been determined in accordance with EA Publication EA-4/02 (formerly EAL-R2). The long term stability of the calibrated object is not included in the reported expanded uncertainty of measurement.

Page 5: EcoGuard TS1001

KALIBRERINGSBEVIS CALIBRATION CERTIFICATE

Date Page

2014-03-27 3 (3) Reference

MTv4F006969-K01

SP Technical Research Institute of Sweden

Traceability The measurement results are by regular calibrations of the laboratory’s standards traceable to the Swedish National Laboratories for electrical quantities and temperature at SP in Borås. The National Laboratory for Temperature realizes ITS-90 from -189.3442 °C to 2600 °C. To ensure international equivalence and acceptance of the established traceability, interlaboratory comparisons are made between national laboratories.

Equipment Resistance thermometer, Pt100 ohm, serial no. 68254 DTM, Hart 1502A, serial no. A13412 Water bath, Heto KB 24, serial no. 7612

SP Technical Research Institute of Sweden Measurement Technology - Volume, Flow and Temperature Performed by Examined by

__Signature_1 __Signature_2 Lars-Erik Josefson Magnus Holmsten

Page 6: EcoGuard TS1001

KALIBRERINGSBEVIS

utfärdat av riksmätplats 01 CALIBRATION CERTIFICATE issued by a Swedish National Laboratory Contact person Date Page

Lars-Erik Josefson 2014-03-27 1 (3) Measurement Technology +46 10 516 54 56 [email protected]

Reference

MTv4F006969-K02

EcoGuard AB Hammarbacken 4A 191 49 SOLLENTUNA

Calibration of temperature logger

SP Technical Research Institute of Sweden

Postal address Office location Phone / Fax / E-mail National Laboratories are designated by the Swedish Government according to the Act (2011:791) and the Decree (2011:811) concerning testing and metrology. SP operates under ISO 17025, supervised by SWEDAC. This document may not be reproduced other than in full, except with the prior written approval of SP.

SP Box 857 SE-501 15 BORÅS Sweden

Västeråsen Brinellgatan 4 SE-504 62 BORÅS

+46 10 516 50 00 +46 33 13 55 02 [email protected]

Identification Object 22 temperature loggers Ecoguard model TS-020000,

identification se table of results. Object state Upon arrival the objects had no visual damages. Calibration location The National Laboratory for Temperature, SP, Borås, Sweden Calibration date March 25, 2014

Measurement methods and procedures Comparison in liquid baths with one of the resistance thermometers of SP according to SP-Method 2876. The loggers were protected from contact with the fluid of the bath during the calibration. The temperature loggers registered the temperature in the bath for at least 4 hours at each temperature. The measurement results are presented in the form of mean values in the table. A central Unit CE-015110 and web interface Sensor Reading Report Generator was used for reading the loggers. The temperature loggers were not adjusted before the calibration. According to data from the customer are the calibrated temperature loggers manufactured between 2008 and 2010. Also according to customer all the loggers have been mounted and used in different apartments.

Measurement conditions Temperature scale ITS-90

Results Results and expanded uncertainty of the calibration are presented in the form of a table on page 2.

Page 7: EcoGuard TS1001

KALIBRERINGSBEVIS CALIBRATION CERTIFICATE

Date Page

2014-03-27 2 (3) Reference

MTv4F006969-K02

SP Technical Research Institute of Sweden

Table of results

EcoGuard model TS-020000

Serial no. Correction Expanded

at 21 °C Uncertainty

°C °C

6461 0.1 ±0.15 7634 0.0 ±0.15 7930 0.0 ±0.15 8002 0.0 ±0.15 8017 0.0 ±0.15 8064 0.0 ±0.15 8347 0.0 ±0.15 8464 0.1 ±0.15 8530 0.1 ±0.15 8547 0.0 ±0.15

13599 0.0 ±0.15 13640 0.1 ±0.15 13662 0.0 ±0.15 13759 0.1 ±0.15 14642 0.0 ±0.15 15898 0.0 ±0.15 16035 0.0 ±0.15 17844 0.0 ±0.15 18006 -0.1 ±0.15 18626 0.0 ±0.15 34792 0.1 ±0.15

110576 0.1 ±0.15

True temperature = instrument reading + correction Uncertainty The reported expanded uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k = 2, which for a normal distribution corresponds to a coverage probability of approximately 95%. The standard uncertainty has been determined in accordance with EA Publication EA-4/02 (formerly EAL-R2). The long term stability of the calibrated object is not included in the reported expanded uncertainty of measurement.

Page 8: EcoGuard TS1001

KALIBRERINGSBEVIS CALIBRATION CERTIFICATE

Date Page

2014-03-27 3 (3) Reference

MTv4F006969-K02

SP Technical Research Institute of Sweden

Traceability The measurement results are by regular calibrations of the laboratory’s standards traceable to the Swedish National Laboratories for electrical quantities and temperature at SP in Borås. The National Laboratory for Temperature realizes ITS-90 from -189.3442 °C to 2600 °C. To ensure international equivalence and acceptance of the established traceability, interlaboratory comparisons are made between national laboratories.

Equipment Resistance thermometer, Pt100 ohm, serial no. 68254 DTM, Hart 1502A, serial no. A13412 Water bath, Heto KB 24, serial no. 7612

SP Technical Research Institute of Sweden Measurement Technology - Volume, Flow and Temperature Performed by Examined by

__Signature_1 __Signature_2

Lars-Erik Josefson Magnus Holmsten