Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
∗∗
1.14-1
03
Electro-pneumatic valve: Flow style (VEF)
Flow style
3 4 1 11VEF
Port Body sizeStandard characteristics Port size
Electro-pneumatic valve: Pressure style (VEP)
PortSymbol
123
1395
128
4.52.5
1 30
451
3
3
2
2
2
4
14
—
0203
W/o sub-plate
Rc(PT)1/4
Rc(PT)3/8
W/o sub-plate
Rc(PT)1/4
Rc(PT)3/8
—
0203
020304030406
Rc(PT)1/4Rc(PT)3/8Rc(PT)1/2Rc(PT)3/8Rc(PT)1/2Rc(PT)3/4
1234
Body sizeSymbol
Std.characteristics
Symbol Max. eff. area mm2Port sizeSymbol
0.05s or less
Specifications
Proportional Solenoid Specifications
Style Flow style Pressure style
Item
Port size Rc(PT)
Fluid Air (Inert gas)
3% F.S.
0.5% F.S.
3% F.S. or less
Not required (Use turbine oil class 1 ISO VG32, if lubricated)
3% F.S.
1.5MPa
1.0MPa
0 to 50°C (Non condensation)
Proof pressure
Max. operating pressure
Hysteresis
Sensibility
Linearity
Lubrication
Weight (kg)
Ambient and fluid temperature
Response time
Repeatability
VEF2121VEF3121
VEF2141VEF3141
VEF2121 VEP3121 VEP3141
0.03s or less 0.03s or less 0.05s or less
0.9 0.91.0 1.41.4
VEA25l 1A
1 (Applicable power amplifier: VEA25l)
Max. current
Rated power consumption
Coil insurance
Max. temperature
Electrical entry
Proportional solenoid recognition symbol
Applicable power amplifier
Coil resistance
4,1 83 4,1 834,1 8,3 21 8,3 2,1 43 8,3 2,1 43
13Ω (20°C)
Class H or equivalent (180°C)
DIN type terminal
13W (20°C, at max. current)
140°C (at max. current)
030406
25Rc(PT)3/8Rc(PT)1/2Rc(PT)3/4
Applicable power amplifier
Symbol
1
Power amplifier
VEA25l
03Pressure style
4 1 1VEP31
Body size Standard characteristics Port size
1
2
14
2—
0203
W/o sub-plate
Rc(PT)1/4
Rc(PT)3/8
030406
Rc(PT)3/8
Rc(PT)1/2
Rc(PT)3/4
Body sizeSymbol
Standard characteristicsSymbol Setting pressure range (MPa)
0.05 to 0.65MPa
0.1 to 0.9MPa
0.005 to 0.15MPa
Port sizeSymbol
Applicable power amplifier
Symbol
1
Power amplifier
VEA25l
VEF3141(Flow style)
VEF2131(Flow style)
VEP3121(Pressure style)
VEP3141(Pressure style)
Controls the flow rate steplessly according to current. (It is a 2/3 port valve that has an electrical throttle valve function.) A model that is suitable for operating conditions, such as the number of ports or maximum effective area, can be selected.
Controls the pressure steplessly according to current. Also, because the effective fully opened area of the exhaust side is identical due to its construction, this valve provides a large exhaust capacity and can be used as a relief valve. (It is a 3 port valve that has an electrical pressure reducing valve function.)
VEF3121(Flow style)
How to Order
AC
AV
AU
AF
AR
IR
VEX
AW
AMR
AWM
AWD
ITV
VBA
VE
VY
G
AL
Electro-Pneumatic Proportional Valve
Series VEF/VEP
VEF/VFP Series 2/15/99 10:31 AM Page 1
∗∗
1.14-2
How to Use DIN Terminals
Wiring procedure
Connection
Terminal blockConnection 3 is not usedfor terminal 1 and 2.∗Coil has no polarity
Caution
Application Examples
Controlling pressure for die press cushion Controlling multispeed of cylinder
Controlling welding pressure ofwelding machine electrode
Controlling pressure of lowpressure die casting
Controlling rotation of air motor
qLoosen the retaining screw and pull the connector from the pin plug.
wMake sure to remove the retaining screw, insert the tip of a flat head screw driver into the groove below the terminal block and pry it up to separate the terminal cover from the terminal block.
eSecurely connect the wires to the specified terminals in accordance with the wiring procedure.
Applicable cable (Heavy insulation cable)
Outlet changing procedureTo change the wire outlet, first separate the terminal cover from the terminal block. Then, reinstall the terminal cover in the desired direction (in 90° increments).
0.75mm2, 1.25mm2/2-core, 3-core (O.D. ø6.8 to ø11.5) based on JISC3312 and C3322
Precautions
Caution
Caution
qAir source
eLubrication
rManual operation
wInstallation
Poor quality air could increase the spool's sliding resistance, while preventing it from attaining its specified characteristics. Use compressor oil with a minimal generation of oxidants and install a mist separator (SMC's AM series). Refer to the No.4 system of the Compressed Air Cleaning Systems catalog on p.4.0-1.
IThoroughly flush the pipes to completely remove any dust or scales from the inside of the pipes.
IInstall a silencer (AN series) on the exhaust port.
IBe careful with the mold coil because it generates heat while current is applied to it.
IVibrations are transmitted to the valve by the proportional solenoid's dither. If it is necessary to prevent the transmission of vibrations, insert vibration isolating rubber material.
This product can be used without lubrication. To lubricate, use class 1 ISO VG32 turbine oil (non-additive type). Spindle oil, machine oil, or grease cannot be used.
To check the operation of the valve without applying a current, remove the lock nut and use a screwdriver or the like to press the tip of the core. After checking the operation, reinstall the rubber cap in its original position.
VE lll0 must be used in conjunction with the power amplifier VEA1ll.
An old VEA1llcannot be used in combination with the current VE lll1.
PF
P F
The previous types VE lll0 and VEA1llP F
Be sure to read before handling. Refer to p.0-26 and 0-27 for Safety Instruction and common precautions on the products mentioned in this catalog.
VEF/VFP
VEF/VFP Series 2/15/99 10:31 AM Page 2
∗∗
1.14-3
Flow Characteristics/3 PortOperation Principle Diagram
Flow Characteristics/2 Port
The spool controls the sleeve's opening through the balance between the proportional solenoid's pulling force (F1) and the spring's reaction force (F2). The spool moves in accordance with the amperage that is applied to the proportional solenoid, thus controlling the flow rate.
AC
AV
AU
AF
AR
IR
VEX
AW
AMR
AWM
AWD
ITV
VBA
VE
VY
G
AL
Electro-Pneumatic Proportional Valve VEF/VEP
VEF/VFP Series 3/9/99 9:47 PM Page 3
∗∗
1.14-4
Flow CharacteristicsCurrent-Pressure Characteristics
Pressure Characteristics JIS B8372
Operation Principle DiagramThe control opening becomes closed when the solenoid's pulling force (F1) balances with the force (F2), which is created by the secondary pressure (P2) that passes through the feedback passage and acts on the spool surface. As a result, the secondary pressure (P2) is established.
The horizontal axis of the characteristics represents the output current of the power amplifier VEA25l. (If NULL and GAIN are in the shipping condition, 0 to 1A can be viewed by substituting them with command signals 0 to 5V.)
Pressure Control Style: VEP
(In accordance with air regulator)
VEF/VFP
VEF/VFP Series 3/9/99 9:48 PM Page 4
Construction
Flow style: VEF2131(2 port)
No. Description NotesMaterialMetallic paintedMetallic painted
———
Metallic painted—
Aluminum alloyAluminum alloy
Special stainless steelSpecial stainless steel
—Aluminum alloy
—
BodySub-plateSpoolSleeveMold coilSolenoid cap ass'yMovable core ass'y
q
w
e
r
t
y
u
Component Parts
Replacement Parts
No. DescriptionPart number
Material
DXT172-3DXT172-6
DXT172-14-lDXT172-7
DXT172-8-l—
AS568-014AS568-016AS568-021
M4 X 32, With WM4 X 10, With WM4 X 60, With WDXT010-11-7
VEl 12023
—VEP3-4
—XT019-2
DXT172-8-7VEP3-3
AS568-018—
AS568-021——
M4 X 60, With WDXT010-11-7
VEF2131———
VEP4-7VEP4-8-l
VEP4-5AS568-119
—AS568-021
—M4 X 10, With WM4 X 60, With WDXT010-11-7
VEl 140Aluminum alloy
ResinBrassNBR
Stainless steel/Piano wireBrassNBRNBRNBR
Chromium-molybdenumChromium-molybdenumChromium-molybdenum
NBR
End coverPushSet pushingGasketSpringSpring seatO ringO ringO ringHex. socket head cap screwHex. socket head cap screwHex. socket head cap screwLock nut
i
o
!0
!1
!2
!3
!4
!5
!6
!7
!8
!9
@0
23
Flow style: VEF2141(2 port) VEF3141(3 port)Pressure style: VEP3141(3 port)
Flow style: VEF2121(2 port) VEF3121(3 port)Pressure style: VEP3121(3 port)
1.14-5
∗∗∗
AC
AV
AU
AF
AR
IR
VEX
AW
AMR
AWM
AWD
ITV
VBA
VE
VY
G
AL
Electro-Pneumatic Proportional V alve VEF/VEP
VEF/VFP Series 4/2/1999 2:57 PM Page 5
Flow style: VEF2121, VEF3121Pressure style: VEP3121
Dimensions/Flow style: VEF, Pressure style: VEP
Flow style: VEF2141, VEF3141Pressure style: VEP3141
Flow style: VEF2131
403-ø5.5Mounting hole
A(2) port
2 port: R port plugP(1) port R(3) port
G(PF)1/2
Cabtire cableO.D.ø6.8 to ø11.5
1225025
2813
3-Rc(PT) 1/4, 3/8
101
113
21
2-Rc(PT)1/4, 3/8, 1/2
A(2) port
35
A
64
51 6595
129
P(1) port
50
102
50
3-ø7 Mounting hole
G(PF)1/2
Cabtire cableO.D. ø6.8 to ø11.5
154.
512
0.5 A(2)
port
53
82
3536
P(1) port
3-Rc(PT) 3/8, 1/2, 3/4
R(3)port
58
81
12
R
P
2 port: R port plug
52
66
110.
5
4-ø9Mounting hole
G(PT)1/2
58
64
9
45 56 64
P
Cabtire cableO.D. ø6.8 to ø11.5
1.14-6
∗∗
VEF/VFP
VEF/VFP Series 2/15/99 10:33 AM Page 6