Upload
vannhu
View
223
Download
2
Embed Size (px)
Citation preview
H-1-B_HITCH • Rev. 1/29/15 • 1-B-1
Husky Tilt Plate 16K S Straight Jaw Fifth Wheel Hitch (Husky Silver Series) Husky 16K S Tilt Plate Design Advantages: • Addition of a pop out safety hookup indicator• Engineered/designed tolerances for less noise• Better fit of components for consistent performance and a quieter ride• Fore and aft adjustment on the uprights for proper “hitch over axle” placement• Unlike some slide bar style hitches, the sides of the 16K S are open and allow the king pin to swing without hitting the sides of the head• Meets or exceeds SAE J2638 fifth wheel standards• Superior finish• Yellow zinc fasteners• Compatible with all Husky custom install kits and earlier model X-16 Husky hitches
Husky 16K S Tilt Plate Fifth Wheel Hitch (Straight Jaw) Product Use with all Fifth
Wheels up to*Jaw Style
Pop-out Indicator
Fore/Aft Adjustment
Warranty**
Husky 16K S 16,000 lbs. Straight Yes 2 Position 5 years
*Do not exceed vehicle manufacturer weight capacity. **See www.huskytow.com for warranty details.
Red indicates 16K S jaw in open position
Green indicates jaw in closed
position. Visible indicator pin on
16K S verifies king pin is engaged
16K S Features
The 4-way side to side, front to rear pivoting tilt plate provides easy hookup in most situations. The locking mechanisms in tilt plate hitches do not tilt with the head; they remain stationary while only the king pin and tilt plate move.
31313 16K S head shown with 31314 uprights and base rails; order components separately
(see below)
31313 16K S Head shown with 31196 Husky 10-16 Gllider
31313 Head and Cross-member Kit
The Glider positions the 16K S up to 10” on short bed trucks
Protect your short bed pickup by using a positioning device
like the Husky 10-16 Glider with your 16K S
See next page to order
Fifth Wheel Towing
H-1-B_HITCH • Rev. 1/29/15 • 1-B-2
*Installation Kits sold separately (see Base Rails/Brackets). Husky offers vehicle specific install kits with universal or limited drill installations.
CHOOSE A PRE-CONFIGURED KIT AND ADD BASE RAILS: Kit # for Pickup: Plus Base Rails*
16K S Head/Cross-member with Uprights Long Bed 31664 + 30686
16K S Head/Cross-member with Husky 16K Roller (see page 6) Short Bed 32354 + 30686
OR BUILD YOUR OWN HUSKY 16K W HITCH CONFIGURATION Head/Cross-Member Uprights or Positioning Device: Plus Base Rails*
16K S Head/Cross-member plus Uprights (order separately) 31313 + Long Bed 31314 + 30686
16K S Head/Cross-member plus Husky 10-16 Glider (see page 6) (order separately)
31313 + Short Bed 31196 + 30686
16K S Head/Cross-member plus Husky 16K Roller (see page 6) (order separately)
31313 + Short Bed 32220 + 30686
31313 16K S head shown with 32220 Husky 16K Roller and base rails; order components
separately (see below)
HUSKY 16K S FIFTH WHEEL HITCH CONFIGURATIONS
31313 3068631314 31196 32220
31313 16K S Head shown with
31314 Uprightsand base rails; order components above
16K SCOMPONENTS
The strong, basic 31314 Uprights (2 per set) are the standard for long bed truck configurations on both the Husky 16K S and 16K W Fifth Wheel Hitches. The uprights securely support the hitch head and attach to the base plates (order separately).
31664 Kit consisting of 31313 16K S head with
31314 Uprights. Just add base rails for a complete hitch.
31313 16K S head shown with 31196 Husky 10-16 Glider
and base rails; order components separately (see below)
Husky 16K S Tilt Plate Fifth Wheel Hitches
Fifth Wheel Towing
H-1-B_HITCH • Rev. 1/29/15 • 1-B-3
THE NEXT GENERATION OF FIFTH WHEEL HITCHES
A full articulating head allows for the easiest hookups. Articulating heads
move with the motion of the trailer, not the tow vehicle, for a smoother ride on rough roads. The locking mechanisms in
articulating heads move side to side with the king pin.
Husky Full-Feature Articulating HeadWrap-Around Jaw Fifth Wheel Hitch
Husky Full-Featured Articulating Head Design Advantages• Improved pop out safety hookup indicator• Handle moved forward, further from the king pin box• Foam grip handle for easier operation• Self locking and release handle• No need to manually open the jaw to hitch up• Patented Anti-Walk wrap around jaw• Engineered/designed tolerances for less noise• Better fit of components• Fully articulating head (the jaw moves with the head) • Fore and aft adjustment on the uprights for proper “hitch over axle placement”• Improved cross member with castle nut• Meets or exceeds SAE J2638 fifth wheel standards• Radius added to the top plate for rugged appearance• Superior finish• Yellow zinc fasteners• Compatible with all Husky custom install kits and earlier model Husky hitches
• MORE FEATURES in a sleek Husky design
• LARGE SELECTION of no-drill/limited drill applications
• Easy installation options
• Weight ratings that meet the needs of the RV industry
• Only line of fifth wheel hitches with fore & aft upright adjustment
• Safety hook-up indicator on all models
• Very competitive pricing
• Less inventory investment required
Husky Full-Featured Articulating Head Fifth Wheel Hitches (Wrap-Around Jaw)Product Use with all Fifth Wheels up to* Jaw Style Pop-out Indicator Fore/Aft Adjustment Warranty**
Husky 16K W 16,000 lbs. Wrap Yes 2 Position 5 years
Husky 26K W 26,000 lbs. Wrap Yes 3 Positions 10 years*Do not exceed vehicle manufacturer weight capacity. **See www.huskytow.com for warranty details.
Castle Nut secures head and reduces noise
Wrap around jaw fully encloses
trailer king pin
Full Featured 16K W & 26K W Features
On the full-featured series, orange indicates the jaw is open
No orange means
you’re latched
16K W
Husky Silver Series
31326 16K W head shown with 31314 uprights and base rails; order
components separately (see next page)
26K W
31318 26K W head shown with 31325 uprights and base rails; order components separately
(see next page)See following pages to order
Fifth Wheel Towing
H-1-B_HITCH • Rev. 1/29/15 • 1-B-4
*Installation Kits sold separately (see Base Rails/Brackets). Husky offers vehicle specific install kits with universal or limited drill installations.
CHOOSE A PRE-CONFIGURED KIT AND ADD BASE RAILS: Kit # for Pickup: Plus Base Rails*
16K W Head/Cross-member with Uprights Long Bed 31666 + 30686
16K W Head/Cross-member with Husky 10-16 Glider (see page 6) Short Bed 31667 + 30686
16K W Head/Cross-member with Husky 16K Roller (see page 6) Short Bed 32392 + 30686
OR BUILD YOUR OWN HUSKY 16K W HITCH CONFIGURATION Head/Cross-Member Uprights or Positioning Device: Plus Base Rails*
16K W Head/Cross-member plus Uprights (order separately) 31326 + Long Bed 31314 + 30686
16K W Head/Cross-member plus Husky 10-16 Glider (order separately) 31326 + Short Bed 31196 + 30686
16K W Head/Cross-member plus Husky 16K Roller (order separately) 31326 + Short Bed 32220 + 30686
31326 16K W head shown with 31196 Husky 10-16 Glider
and base rails; order components separately (see below)
31326 16K W head shown with 32220 Husky 16K Roller and base rails; order components separately
(see below)
HUSKY 16K W FIFTH WHEEL HITCH CONFIGURATIONS
31666 Kit consisting of 31326 16K W head with 31314 Uprights. Just add
base rails for a complete hitch.
31326 3068631314 31196 32220
Already have a Husky 10-26 Glider? You can use your
Husky 16K W Head on the Husky 10-26 Glider also
31326 16K W Head shown with
31314 Uprightsand base rails; order components above
16K WCOMPONENTS
Fifth Wheel Towing
H-1-B_HITCH • Rev. 1/29/15 • 1-B-5
*Installation Kits sold separately (see Base Rails/Brackets). Husky offers vehicle specific install kits with universal or limited drill installations.
CHOOSE A PRE-CONFIGURED KIT AND ADD BASE RAILS: Kit # for Pickup: Plus Base Rails*
26K W Head/Cross-member with Uprights Long Bed 31668 + 30686
26K W Head/Cross-member with Husky 10-26 Glider (see page 7) Short Bed 31690 + 30686
OR BUILD YOUR OWN HUSKY 16K W HITCH CONFIGURATION Head/Cross-Member Uprights or Positioning Device: Plus Base Rails*
26K W Head/Cross-member plus Uprights (order separately) 31318 + Long Bed 31325 + 30686
26K W Head/Cross-member plus Husky 10-26 Glider (order separately) 31318 + Short Bed 32042 + 30686
31690 Kit consisting of 31318 26K W head with
32042 Husky 10-26 Glider. Just add base rails for a c
omplete hitch.
HUSKY 26K W FIFTH WHEEL HITCH CONFIGURATIONS
31318 3068631325 32042
26K WCOMPONENTS
Description Part #Popular Replacement 5th Wheel Hitch PartsBag/4 Rail Hitch Pin, 1/2" x 4-1/8" (3-1/2" Usable Length) 30003Spring Clip, Bulk 33792Bag/4 Spring Clip 30004
Popular Replacement Parts for 5thWheel Hitches (Black or Silver Series)Replacement Rail Hitch Pins and Spring Clips.
31318 is the 26K W Head and Cross-member Kit, ready to configure
to your truck
31318 26K W Head shown with
31325 Uprightsand base rails; order components below
31668 Kit consisting of 31318 26K W head with the extra-strength 31325 Uprights. Just add base rails for a
complete hitch.
Fifth Wheel Towing
H-1-B_HITCH • Rev. 1/29/15 • 1-B-6
Description Part #Husky 10-16 Glider 31196
Rails, fifth wheel head and Glider sold
separately.
POSITIONING DEVICES FOR SHORT BED TRUCKS
Husky 10-16 GliderLIGHTER WEIGHT FOR 16K HITCH INSTALLATIONS
• For units up to 16,000 lbs.• 10" of travel• Quiet due to reduction in metal to metal contact• Easy to operate ergonomic handle• No bind mechanism• Installs in current 4-bolt and 10-bolt base rails with a 20-5/8"
footprint• Can be used in both black and silver series hitches• Travel is on a single composite rail for long wear and high loads.• Composite rail will not rust like metal wheels• Balanced system allows easy movement• Lighter weight than 26K glider for easier installation• Passes SAE J2638 requirements• Beautiful Silver Powder coat rated for 500 hours salt fog resistance• US Patent #8,727,369
31196 Glider shown with
31313 Husky 16K S and base rails
Husky 16K Roller• 16,000 lb. capacity• Moves the hitch head 9"• Easy to assemble• Visible locking pins for safe operation• Powder coat finish for durable scratch and
corrosion resistance
32220 Roller shown with Husky 16KW
32220 Roller shown
with Husky 16KS
NEW!
31196
31196 Glider shown with
31326 Husky 16K W and base rails
32220
Description Part #Husky 16K Roller (without fifth wheel head/cross member assembly) 32220Center Bolt Kit (for proper installation) 32059
Husky’s 16K Roller provides all the basic roller functions to equip short bed trucks for towing fifth wheel trailers weighing up to 16,000 pounds. Husky’s economical roller provides needed truck-to-trailer clearance for low speed maneuvers. Installs with just four pins and clips. The Husky Roller’s lift adjustment lets you minimize the distance between the wheels and the rails for smooth operation. It even includes two handles for versatility: one for the Husky 16KS, and one for the 16KW. Works in the base rail slots spaced 20-5/8” apart (base rails not included). Husky recommends using the #32059 Center Bolt Kit for proper installation. Use only Husky 5th wheel hitches with the Husky 16K Roller.
Fifth Wheel Towing
H-1-B_HITCH • Rev. 1/29/15 • 1-B-7
Husky 10-26K Glider
• For units up to 26,000 lbs. with a 2” king pin• 10” of travel• Quiet due to the reduction of metal-to-metal
contact• Easy to operate ergonomically designed handle
and latching mechanism: no more pulling and twisting of a handle
• Eliminates working with pins or latches which bind when on uneven ground
• Installs to our current rails and all standard rails in the 20-5/8” footprint
• Can be used on our Silver or Black series 16K and 26K fifth wheel hitches
• A balanced system allows easy movement along the 10” of travel
• Travel is on two compatible composite materials designed for long wear, high loads and resistance to the elements
• Yellow zinc chromate hardware to resist corrosion• US Patent #8,727,369• Lab tested—road proven!
No more wear on rails caused by metal rollers that can grind off paint to cause potential rust areas! (See illustration 4)
“No-Bind” Latching MechanismToday with any roller, if you have load against the locking pin/mechanism, you have to jockey the truck and keep getting in and out trying the handle until it disengages. With the Husky 10-26 Glider, you just put the operating handle in the Unlock position, get in your truck and drive forward or back, depending on what position you need to be in. Even if you are on uneven ground and the locking mechanism has pressure against it, you no longer have to jockey the truck and get out again to try the handle. With the Husky 10-26 Glider, you just move slightly forward or aft and listen for the locking mechanism to automatically release when the pressure subsides, allowing the flipper to automatically lock in the next posi-tion. No more 2-person job, no more in-and-out of the truck to work the handle.
Compression cylinder takes the pressure from the load on the mechanism
Composite materials glide to prevent metal-on-metal grinding for quiet operation
Flipper automatically selects the next lock position, while you are still in your truck
Truck moves forward, compression cylinder relaxes to allow flipper to work
1
3
2
4
32042 Husky 10-26 Gliderassembly pictured with 26 KW head;
order components separately
Description Part #Husky 10-26 Glider 32042
Fifth Wheel Towing
H-1-B_HITCH • Rev. 1/29/15 • 1-B-8
HUSKY FIFTH WHEEL LUBE DISCThe easy way to prevent friction without grease! Just slip the Fifth Wheel Lube Disc onto the pin; fits all types of fifth wheel trailers. A real convenience! Pk/1.
Fifth Wheel Lube Disc: 33862 Standard, 8" Dia. #33862 100
34914 Heavy-Duty 10" Dia. #34914 50
32256 NEW! Heavy-Duty 12" Dia. #34914 50
HUSKY 5TH WHEEL KING PIN LOCK
Protect your fifth wheel with the Husky King Pin Lock. Just slide the U-bracket into the grooved portion of the king pin and insert the lock pin.
38790 Fifth Wheel King Pin Lock#38790 12
Fifth Wheel Towing