Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
fonton' ULV Cold Fogging Aerosol ApplicatorsMade in Germany
\-/ Fontan Portastar 5
Spray gun
TECHNOLOGY FOR PROFESSIONALSFontan - the optimal machrnes for Vector and Pest Control. Application of Larvicrdes
Locust Control. Sewage Treatment.Fontan Portastar S - a genuine ULV applicator.
drHSwir,rciec
Ifontan@ + swingfog@
QUALTTYWTNSrlt
Swingtec GmbH, Postfach 1322,88307 lsny, Germany, Tel. +49 7562708-0, Fax +49 7562708-11 1, E-Mail: [email protected], www.swingtec.de
I
Technica! data Fontan Portastar S
EngineCubic capacityPerformanceFuel/Engine oil
Oil/fuel mixtureFuel consumptionlqnitionCarburettorSta rter
two-stroke engine, air cooled37 cm'1.5 kW/2.0 hp, maximumstandard grade petrol, leaded or unleaded, mixed withquality two-stroke oil1:50
0.9 l/helectromagneticdiaphragm carburettormanual recoil starter
CompressorAir volumePressure
Drrve
oil and maintenance free rotation pump35 m:/h0.4 bardirect drive with centrrfugal clutch
Air velocity at the nozzle 200 m/sec
Spray mode ULV (Ultra Low Volume)
Spray system spray gun with on/off trigger for intermittent or continuous {ogging
Spraying tankCapacity
polyethylene, UV light resistant3l
Fuel tankCapacity
polyethylene, UV light resistant
1.0 I
Fogging dataFog distribution by drift approx. 50 m up to '100 m, dependent on wind speed
Outputat full engine speed(measured with water)
dosaqe nozzles. stainless steel
30 1Vh45 2Vh58 3 l/h68 4l/h84 6lhwithout nozzle 17 lh
Droplet size with all dosage nozzles VMD (Volume ltrledian Diameter) < 30 pm
Dimensions 41 x43 x 48 cm
Weight (empty) 1 2.8 kg
Standard accessories dosage nozzles, stainless steel 30 I 45 / 58 / 84 (nozzle 45 already installed)
chemical funnel with strainer (mesh width 0.1 mm, stainless steel)
fuel funnel with strainer (mesh width 0. 1 mm, stainless steel)
carrying straps and waist belttool kitear protection (2 sets)
instruction manual including spare parts list
Optional accessory(available at extra charge)
dosage nozzle, stainless steel 68
Subject to technical modif ications.
I
-a