Training Datasheet SUBSEA EQUIPMENT INSULATION Thermal Insulation G05 PTM 1007 Trelleborg Offshore Trelleborg CRP Inc. • Trelleborg CRP Ltd. • Trelleborg Emerson & Cuming Inc. Trelleborg Fillite Inc. • Trelleborg Fillite Ltd. • Trelleborg OCP Ltd. • Trelleborg Viking AS Product Description Thermal Insulation material in the form of Polyurethane, Syntactic Polyurethane or Syntactic Epoxy is applied to components of Subsea Production Equipment to thermally insulate. Varying levels of insulation both in terms of thickness and area coverage are applied depending on the specific project requirements. Materials are chosen project specifically depending on operating depth, temperatures and method of application. Applications Flow assurance has become a critical aspect of Deepwater developments. To protect subsea structures such as Trees, Manifolds, PLETS, Sleds and Jumpers from hydrate formation (waxing) they are insulated externally. Trelleborg CRP’s key clients are the major Tree manufacturers, equipment fabricators and installation contractors. Product Advantages • Trelleborg CRP have a wide product range and a strong track record, with expert knowledge regarding material performance and qualification levels with recognised quality and HSE certification. • Mobile site facilities are able to relocate anywhere in the world to operate on client supplied sites. • Trelleborg CRP has the site capacity to insulate Trees and piping components in-house in Skelemersdale (UK) or Houston (USA). Scope of Supply Trelleborg CRP has the capability to cast huge sections of insulation material with single mouldings reaching 2 tonnes. In-house Trelleborg CRP has handled up to 4 trees simultaneously (at about 40 tonnes each). Specification checklist • Detailed drawings to accurately size insulation and tooling. • Required coverage of insulation. • Operating temperature and depth. • Thermal performance requirements. • Preferred logistical scenario.

G05

Download PDF Report

Upload
eayujig
View
213
Download
1

Embed Size (px)

DESCRIPTION

Subsea component installation

Citation preview

Training Datasheet

SUBSEA EQUIPMENT INSULATIONThermal Insulation G05

PTM 1007

Trelleborg Offshore

Trelleborg CRP Inc. Trelleborg CRP Ltd. Trelleborg Emerson & Cuming Inc. Trelleborg Fillite Inc. Trelleborg Fillite Ltd. Trelleborg OCP Ltd. Trelleborg Viking AS

Product Description

Thermal Insulation material in the form of Polyurethane,Syntactic Polyurethane or Syntactic Epoxy is appliedto components of Subsea Production Equipment to thermally insulate. Varying levels of insulation both interms of thickness and area coverage are applieddepending on the specific project requirements.Materials are chosen project specifically dependingon operating depth, temperatures and method ofapplication.

Applications

Flow assurance has become a critical aspect ofDeepwater developments. To protect subsea structuressuch as Trees, Manifolds, PLETS, Sleds and Jumpersfrom hydrate formation (waxing) they are insulatedexternally. Trelleborg CRPs key clients are the majorTree manufacturers, equipment fabricators and installation contractors.

Product Advantages

Trelleborg CRP have a wide product range and a strong track record, with expert knowledge regardingmaterial performance and qualification levels with recognised quality and HSE certification.

Mobile site facilities are able to relocate anywhere inthe world to operate on client supplied sites.

Trelleborg CRP has the site capacity to insulate Trees and piping components in-house in Skelemersdale (UK) or Houston (USA).

Scope of Supply

Trelleborg CRP has the capability to cast huge sectionsof insulation material with single mouldings reaching2 tonnes. In-house Trelleborg CRP has handled up to4 trees simultaneously (at about 40 tonnes each).

Specification checklist

Detailed drawings to accurately size insulation and tooling.

Required coverage of insulation.

Operating temperature and depth.

Thermal performance requirements.

Preferred logistical scenario.