With Ugitech, opt for a stainless steel constitution!

A complete rAnge of grAdes And AdApted dimensions

A complete range of grades and adapted dimensions

Ugitech grade ISO standard ASTM standard

UGI ® KC35N 5832-6 F 562

UGI ® L605 5832-5 F 90

UGI ® PHYNOX ®1 5832-7 F 1058

UGIPURE ® 4441 5832-1 F 138

UGIPURE ® 4472 5832-9 F 1586

UGIPURE ® XM19 - F 1314

Our strong points The facilities and technical expertise of an international company steeped in over a hundred years of steelmaking experience. R&D-InnovationNew solutions to suit our customers’ needs thanks to a Research Centre at the forefront of metallurgy and an innovation management approach. QualityUgitech has a quality management system that has been certified and approved by the most demanding markets.

Sizes Bars and wires Profiles

diameter 13 μ to 130 mm1 mm² to 70 mm²

Implantable gradesProducts ranging from UGIPURE ® electro-slag-remelted stainless steels to UGI ® PHYNOX ®1 cobalt-based alloys.

Ugitech grade ISO standard ASTM standard NFS standard

UGI ® 4404 316L

F 899 94090UGI ® 4028 420B

UGI ® 4057 431

UGI ® 4542 630

UGI ® 4034 420

- 94090UGI ® 4435 -

UGI ® 4462 -

UGI ® 4418 -

UGI ® 4197 420 MOD F 899 -

Grades for accessories and instruments A wide range of austenitic and martensitic grades including:

The UGIPURE ® and UGI ® ranges are available in billets, bars, wire rods and drawn wires. 1 PHYNOX ® is a trademark from aperam.

To notice the new UGI ® 4116N grade (1.4116 to EN 10088) that combines high hardness (midway between that of the AISI 440B and AISI 440C grades) and good corrosion resist-ance for medical instruments.

02

Orthopaedic reconstruction UGIPURE ® 4441, UGIPURE ® 4472, UGI ® KC35N, UGI ® PHYNOX ®1

Vascular Endoprothesis UGIPURE ® 4441, UGIPURE ® 4472, UGI ® KC35N, UGI ® PHYNOX ®1, UGI ® L605

Shoulder

Elbow

Hip

Knee

Ankle

1 PHYNOX ® is a trademark from aperam.

Aneurysm clips

Stents

Vena cava filter

orthopAedic reconstruction And VAsculAr endoprothesis 03

Villi® - www.imprimerie-villiere.comBrandLite – Medical_EN/01-2014D2291EN

Non contractual document

Ugitech SA

France

Avenue Paul Girod CS9010073403 UGINE Cedex

Tel.: + 33 (0)4 7989-3030Fax: + 33 (0)4 7989-3434

www.ugitech.com