Upload
hssingmec
View
50
Download
20
Embed Size (px)
DESCRIPTION
lj,bkj
Citation preview
Godwin Pump Selection OCTOBER 2013
*Please put your phones on silents'il vous plat mettez vos tlphones en mode silencieux
bitte setzen Sie Ihre Telefone auf stummprosm, dt sv telefony na tichneem dan zet je telefoon op stilSi prega di mettere il telefono in silenziovnligen stta dina telefoner p ljudls,
Welcome to all our colleagues
Presented by Colin Baker Business Unit Development Manager [email protected]
Dave Boucher Business Unit Product Support & Applications Engineer [email protected] Dan Wignall Sales [email protected]
Please have your phones on mute
Please ask questions at the end or send them as a message on the Chat function within WebEx!
Thank you for taking the time, we hope you find the next 45 minutes of interest. Welcome
Godwin Pump Family
*Three Important factors to initially consider when selecting a Godwin Pump
FlowHead Distance
Firstly we look at FLOW
How quickly does the customer want to pump the medium away?
Is the water level constant?
What is it? (Slurry? Dirty Water? Sewage?)
Depending on what it is, will effect the selection
Type of pump i.e. CD / HL / Heidra Solids Handling
Flow & Medium FLOW Determines line size(Based on a maximum velocity of 3.65 m/s)
Line SizeFlow Capacity380mm16 L/Sec57.6 m/ H4100mm32 L/Sec115.2 m/ H6150mm64 L/Sec230.4 m/ H8200mm128 L/Sec460.8 m/ H12300mm256 L/Sec921.6 m/ H
*Three important factors to initially consider when selecting a Godwin pump
FlowHead Distance
HEAD
Suction Head
From the lowest point that the pump will need to draw from to the centre line of the impeller on the suction side.
Discharge Head
From the centre line on the pump from the discharge side, to the highest elevated point that the pump has to overcome.
Static Head represented on the curve
Head
TOTAL DYNAMIC HEAD
The sum total of ALL resistance in a pumping application expressed in meters.
i.e. Total Suction Head + Total Discharge Head + Friction losses within pipework = Total Dynamic Head.
Remember Fittings equate to more Friction loss.
BEST EFFICIENCY POINT B.E.P
The point on a pump's performance curve that corresponds to the highest hydraulic efficiency.
Terminology
*Three important factors to initially consider when selecting a Godwin pump
FlowHead Distance
DISTANCE
Distance The Total length of suction and discharge pipeline within the customers System.Things to considerIs there existing pipe work on site?How many fittings in the system?Do we need to re-size the pipe?
Basic Dewatering ApplicationCurrent Water LevelCentreline of PumpFinal Water LevelDrawdown HeightStatic HeadDischarge Hose Fiction LossSuction Hose Friction LossStatic Delivery HeadStatic Suction LiftTotal Suction Head (From Lowest point to centreline of pump)Total Discharge Head (From centreline of pump to Highest Point)Total Dynamic Head
*FlowHead Distance
Once we have understood the impacting factors we can look at the duty points on a curve and understand which pump will best suit the job!
CURVES
Selection on a curve SYSTEM CURVE
A plot of Total Head vs. flow that satisfies the system requirements
Head and flow are directly linked, one cannot change without the other.(i.e. the more flow the greater the frictional loss therefore the system curve is created)
DUTY POINT
The point which is located at the intersection of the system curve and the performance curve of a pump. It corresponds to the flow and head required for the process
FlowHead (m)Static HeadPump Performance CurveSystem CurveFlowHead (m)Total Static HeadDuty PointSystem CurveFrictional Loss
When you have the correct information, then we can start to select the pump!Know what type of pump is required for the installation (i.e. Surface Mounted, Submersible, etc.)
Plot the Flow and Head into your selection programme or onto curve These need to be around your B.E.P! or within the recommended operating range. (The pump will last longer!) Pump Curve Information
Flow Rate Required.
Suction Type (Suction Lift, Flooded, Syphon)
Altitude.
Static discharge head.
Suction pipe length.
Discharge pipe length.
Details of Medium being pumped (solids, ph. value, abrasiveness)
Required pipe fittings in system.
Pump Selection Basic Guidelines
*Suction Lift (lowest draw down point) (3m)Suction Pipe (OD) 300mmSuction Hose Length (10m)Hose Type (Wire Armoured Hose)Static Discharge Head (65m)Discharge Pipework (OD) 300mmDischarge Pipework Length (1000m)Hose Type (HDPE)Flow Required 650 m/HDischarge Pressure (1 Bar)
*
*Calculated Duty Point
System Flow657.6 m/H
System Head (TDH)108.4 m
Power Absorbed(at duty Point)300 kW
Compressor Power Requirement3.0 kW
Total Power Absorbed305.0 kW
Power Absorbed(at end of curve)400.0 kW
Hydraulic Efficiency66%
Pipe Velocity3.7 m/s
Engine Running Speed1596rpm
*Pump Selected
Pump SelectedHL260M
Driver SelectedDiesel Engine
TypeCaterpillar
ModelC18
Max Power415 kW @ 1600 rpm
*Xylect Calculated Duty Pointwww.xylect.com
*Xylect Calculated Duty Point
*Xylect Overview Duty Point
GIGOGARBAGE IN, GARBAGE OUT!
*Just a few more pointers before you go!
See you on the 17th of October - Godwin Pump set Seminar
See next slide for directions to -
Useful Links OasisGodwin PageTPIPricesXylect Thank you for your time!
*Where to find it on OasisHow to use Xylect for Godwin can be found on Oasishttp://oasis.xyleminc.com/en-us/Home/our-offer/pumps/dewatering-pumps/godwin/Pages
*Useful Linkshttp://www.youtube.com/watch?v=OW7YLhcb1Jo
http://www.youtube.com/user/godwinpumps?feature=watch
http://oasis.xyleminc.com/en-us/Home/business-segments/dewatering/News/Pages/Godwin-Dri-Prime-Video.aspx
http://oasis.xyleminc.com/en-us/Home/our-offer/pumps/dewatering-pumps/godwin/Pages/Check-Lists.aspx
http://www.xylect.com
http://oasis.xyleminc.com/en-us/Home/business-segments/dewatering/launches-and-campaigns/Pages/Dewatering-handbook-app.aspx
*Step 1, Go to Oasis, Select Our Offer. Step 2, Select Pumps. Step 3, Select Dewatering Pumps. Once on Dewatering Pumps web page, select the Godwin Tab
**The Godwin Web Page is often updated with stock lists and other useful information such as contacts and manuals.
NB Dont Forget TPI has many technical documents in different languages available and is updated all the time.
http://oasis.xyleminc.com/en-us/Home/our-offer/pumps/dewatering-pumps/godwin/Pages/default.aspx
*Useful LinksDewatering Apps available from iTunes app store
Download yours now!
*Questions & Answers
**Godwin family**************