HomeWorks QS Power Supply - Lutron Electronics 2 product specifications 369404c 09.03.13 HomeWorks ® QS Power Supply Specifications Model Number QSPS-DH-1-60 Power Input: 100 V~ to

product specifications 09.03.13369404c

HomeWorks® QS Power Supply

www.lutron.com 1

The HomeWorks® QS Power Supply provides power to the HomeWorks® QS processor as well as system devices and interfaces.

Featuring easy assembly on a DIN rail, the power supply unit delivers 24 V- output voltage and conforms with UL1310 for IEC PELV / NEC® Class 2 applications.

Use the HomeWorks® QS design utility and power draw documentation for power management details.

Model Number

QSPS-DH-1-60 HomeWorks® QS Power Supply

HomeWorks® QS Power Supply QSPS-DH-1-60

L(+) N(-)

QSPS-DH-1-60

120 - 240 VInput / Entrada / Entrée

24 VOutput / Salida / Sortie

22.5 - 25 V

Technical Support: U.S.A. +1.800.523.9466

www.lutron.com 2


HomeWorks® QS Power SupplySpecifications

Model Number QSPS-DH-1-60Power Input: 100 V~ to 240 V~ 50 Hz to 60 Hz 0.7 A

Output: 24 V- 2.5 APower Draw Units* (PDUs): supplies 75* For more information about Power Draw Units (PDUs), please see

the HomeWorks® QS Wiring and Power Guidelines document on the HomeWorks® QS Resource Website

Environment Ambient operating temperature: 32 °F to 131 °F (0 °C to 55 °C). Ambient operating humidity: 0% to 90% humidity, non-condensing. Indoor use only.

Mounting Mount using 1.38 in (35 mm) DIN railDimensions 3.54 in (90 mm) × 3.54 in (90 mm) × 2.40 in (61 mm)Regulatory Approvals UL/cUL listed UL508, IEC PELV / NEC® Class 2 as per UL1310Industrial Control Panel Supply

UL508

IEC PELV / NEC® Class 2 UL1310European Regulations CERadiated Interference EN 55011 Class B; EN 55022Conducted Radio Interferance

EN 55011 Class B; EN 55022

Electrical Equipment for Machinery

EN 60204

Safety Transformers for Power Supply Units

IEC 61558-2-17

Electronic Equipment for Use in Electrical Power Installations

EN 50178/VDE 0160 (PELV)

SELV IEC 60950 (SELV) and EN 60204 (PELV)Safe Isolation DIN VDE 0100-410; DIN VDE 0106-1010Protection Against Electric Shock

DIN 57100-410; DIN VDE 0106-101

Limitation of Mains Harmonic Currents

EN 61000-3-2

Warranty http://www.lutron.com/TechnicalDocumentLibrary/HomeWorks_Warranty.pdf http://www.lutron.com/TechnicalDocumentLibrary/HomeWorks_Intl_Warranty.pdf




www.lutron.com 3

Dimensions

Measurements shown as: in (mm)

L(+) N(–)

QSPS-DH-1-60

120 – 240 VInput / Entrada / Entrée


22.5 – 25 V

1.77 (45)3.54 (90)

3.54 (90)2.17 (55)

1.73 (44)

2.40 (61)

1.97 (50)


www.lutron.com 4


HomeWorks® QS Power SupplyMounting

• The power supply unit is suitable for use in HomeWorks® QS enclosures and applications only.

• Damage will result if this product is used with previous generations of HomeWorks® products.

• Mount the Power Supply in a HomeWorks® QS enclosure.

Note: This equipment is air-cooled. Mount in a location where the vented cover will not be blocked; minimum 1.18 in (30 mm) above and below is required to reduce the risk of overheating and possible damage to equipment. Failure to provide adequate space for cooling may result in overheating and void the warranty.

• The power supply can be snapped onto any DIN rail in accordance with EN 60715. The device must be mounted horizontally (connection terminal blocks on top).

Mount Remove




www.lutron.com 5

Wiring Diagram

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

HomeWorks® QS Power SupplyQSPS-DH-1-60

HomeWorks® QS ProcessorHQP6-2


www.lutron.com 6


HomeWorks® QS Power SupplyConfiguration

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

PWR

ERR

P P

L1 TX/RX

L2 TX/RX

L1

L2

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L(+) N(-)

QSPS-DH-1-60



22.5 - 25 V

L-LV14

L-LV21/HQ-LV21 PNL-8

Power Supply Breaker Feed

QSPS-DH-1-60 breakers have a large capacitive inrush when first powered. A dedicated breaker feed with no more than the indicated number of power supplies is required to avoid nuisance tripping.

Voltage Breaker Size/Type Max QSPS-DH-1-60 Units

100 V~ to 127 V~15 A QO series standard trip curve 1320 A QO series standard trip curve 15

220 V~ to 240 V~

10 A (B trip curve) 210 A (C trip curve) 310 A (D trip curve) 616 A (B trip curve) 316 A (C trip curve) 516 A (D trip curve) 10


Documents

HomeWorks QS Power Supply - Lutron Electronics 2 product specifications 369404c 09.03.13 HomeWorks ® QS Power Supply Specifications Model Number QSPS-DH-1-60 Power Input: 100 V~ to