Huawei P9 Lite Front Camera ReplacementReplace the front camera in your Huawei P9 Lite

撰写者: Tobias Isakeit

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 1 / 9 页

介介绍绍

Use this guide to replace the front camera in your Huawei P9 Lite.

工具工具:iFixit Opening Picks set of 6 (1)Plastic Cards (1)

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 2 / 9 页

步骤步骤 1 — Back Cover

Use an opening pick to unclip the rear cover, starting from the bottom corner.

Work your way around counterclockwise and carefully pry the plastic tabs open one by one.

步骤步骤 2

There is adhesive underneath theback cover that holds it to thebattery and the metal plate at thetop.

Be careful with the flex cable atthe right hand side.

Twist the opening pick to lever theback cover away and loosen it fromthe adhesive.

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 3 / 9 页

步骤步骤 3

When the back cover is freed fromthe adhesive you can pop it off byhand completely.

步骤步骤 4 — Motherboard Shield

Remove the nine Phillips #00screws that secure the metal shieldplate.

If there are any water indicatorson top of the screws remove themto ensure a proper seating foryour driver.

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 4 / 9 页

步骤步骤 5

Do not remove the shield plate yet, it is attached by a connector and an adhered cable.

Use a spudger to disconnect the fingerprint sensor from the motherboard.

Peel the NFC antenna cable off of the metal plate.

步骤步骤 6 — Motherboard

Remove the SIM card tray.

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 5 / 9 页

步骤步骤 7

Disconnect the motherboard flex, the battery flex and the antenna cable.

步骤步骤 8

Disconnect the display flex and the power and volume button cable.

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 6 / 9 页

步骤步骤 9

Unplug the rear camera and the headphone jack.

步骤步骤 10

Take the camera and the headphone jack out of their recesses.

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 7 / 9 页

步骤步骤 11

Use a spudger to lift the motherboard carefully.

Remove the motherboard assembly.

On the back of the motherboard there is a thermal pad (pink rubber-like gob) for heat dissipation. Ifyou are about to replace the display assembly, and the thermal pad broke or is too dried out, youmight want to replace it with a new one.

步骤步骤 12 — Front Camera

Disconnect the front camera flex from the motherboard.

Flip the motherboard over and thread the flex cable through the opening and take the cameraaway.

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 8 / 9 页

To reassemble your device, follow these instructions in reverse order.

Huawei P9 Lite Front Camera Replacement 草案： 2019-05-28指南 ID： 85023 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-18 05:09:54 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 9 / 9 页