In the Air and On the Ground, Environmentally Friendly Cleaning SolutionsApplied Industrial Technologies and AEROGREEN

AEROGREEN® Specialty Cleaners

Authorized distributor:Products of:

FEATURES & BENEFITS• Made with innovative, water-based technologies

• Powerful replacements for toxic solvents

• Eco-friendly, 95% VOC reduction

• Help companies meet their “Green Mandate”

• Commercial, industrial and aviation applications

• Easy to apply, easy to rinse, residue free

• Will not harm equipment, landscaping or contaminate ground water

• Prevent corrosion by working safely and effectively on all metals

• Compatible with oil / water separators and wastewater treatment systems

• Non-combustible / cheaper to ship, easier to store, safer to use

• None of the hassles or expenses associated with hazardous materials

AEROGREEN 4025 Mold, Mildew and Algae Cleaner is a concentrated, effective, eco-friendly cleaner that quickly and safely removes mold, mildew and algae from airfield surfaces and surrounding buildings. AEROGREEN 4025 makes your airfields clean and safe again by restoring safe friction levels on your runways and improving the visibility of airfield markings. This water based, non-hazardous cleaner can be used with both cold and heated high pressure washers to quickly and safely remove a variety of residues from airport terminals, tarmacs, hangars, parking lots and ground support equipment.

Features and Benefits• Will not harm airport equipment,

landscaping or contaminate ground water• Certified by Boeing, McDonnel Douglas,

EPA and AST specification to ensure safety to a variety of metals and substrates

• User-friendly, easy to apply and rinse, residue free

• Compatible with oil / water separators and wastewater treatment systems• Helps airports meet their “green” mandate

Part Mfg Part Order Number Container Size

4025

4025P 110469131 5 gallon pail4025D 110469132 55 gallon drum

4025T275 110469133 275 gallon tote4025T330 110469134 330 gallon tote

AEROGREEN 4035 Runway Rubber Remover is a 100% biodegradable, eco-friendly cleaning solution that emulsifies rubber from the runway surface dissolving the rubber residue into the solution. When combined with heavy duty sweeper / broom scrubbing action or hydro agitation, AEROGREEN 4035 thoroughly removes runway rubber residue, making the touch down zone safe for landing aircraft. It is a residue-free, non-hazardous, non-flammable, non-combustible solution that contains no caustic ingredients, so it won’t harm metals, runway pavement seals and caulking compounds, runway lights, landing aircraft or airport personnel.

Features and Benefits• Eliminates potential runway damage• Restores friction to the runway surface• Will not damage specialized airport

equipment and rinses easily• Certified by Boeing, McDonnel Douglas, EPA,

and AST specification to ensure safety to a variety of metals and substrates• Cleans existing markings without damage• Compatible with oil / water separators and wastewater treatment systems• Safe for the environment and your personnel• Saves time and money

Part Mfg Part Order Number Container Size

4035

4035P 110469135 5 gallon pail4035D 110469136 55 gallon drum

4035T275 110469137 275 gallon tote4035T330 110469138 330 gallon tote

Before After

2 Call your local Applied® service center to order at 1-877-279-2799 or visit us online at Applied.com

Aviation Products

AEROGREEN 4110 Paint Prep Cleaner is a concentrated, water based, environmentally friendly pre-paint cleaner for metal surfaces and removes dirt, oils, greases, hydraulic fluids, fingerprints and a variety of other industrial and manufacturing soils from metal surfaces prior to applying primer and / or top coat. It is a superior and cost effective drop-in replacement for MEK, MIBK, IPA, lacquer thinner and other hazardous solvents. AEROGREEN 4110 will help achieve ‘green’ environmental compliance, while saving you time and money. It is compatible with all water base paints, acrylics, enamels, powder coats and more!

Features and Benefits• 100% readily biodegradable• Leaves no residue and requires no rinsing• Non-hazardous• Low VOC’s; no odor; requires no respirator• Non-combustible• Excellent bonding

Part Mfg Part Order Number Container Size

4110

4110QT12 110469139 32 oz.4110P 110469141 5 gallon pail

4110G4 110469140 1 gallon4110D 110469142 55 gallon drum

4110T275 110469143 275 gallon tote

AEROGREEN 4130 High-Pressure Cleaner Degreaser quickly breaks down and safely removes dirt, exhaust soot, oils, greases, hydraulic fluids, fuel residue and more. Developed to be used through your pressure washing equipment or as a pre-spray in a pump sprayer or foam sprayer. Cleans and degreases industrial buildings, sidewalks, parking lots, industrial equipment, trucks, engines, tankers, fleet vehicles, military vehicles, construction equipment, farm equipment, transit buses, trains and vehicles.

Features and Benefits• Quickly cleans machinery, vehicles,

buildings, tools & equipment• Water-based, eco-friendly, non-toxic,

low VOC’s• Powerful, user-friendly, concentrated,

cost-effective• Used with cold and heated high

pressure washers• Can be diluted with water 8-1 up to 30-1 (based on PSI)

Part Mfg Part Order Number Container Size

41304130G4 110469145 1 gallon4130P 110469146 5 gallon pail 4130D 110469147 55 gallon drum

AEROGREEN 4175 Ink and Coating Remover has a unique 100% readily biodegradable, non-toxic, water soluble formula that makes it a better alternative than current VOC solvents for removing various inks, adhesives, paints, coatings and varnishes on cleaning equipment, industrial printing presses, blanket rollers, conveyor rollers and industrial floors. By using 4175 as a drop-in replacement for toxic cleaners such as acetate / alcohol, mineral spirits, isopropyl acetate, and other VOC solvents, you’re not only reaping the benefits of using a superior ink coating, tar and adhesive remover, you’re protecting the environment and your workers. 4175 Ink and Coating Remover saves you time and money by reducing both the direct and indirect steps and costs associated with solvent application

Features and Benefits• Removes solvent, oil and water-based inks• Non-hazardous• Low VOCs• User Friendly• Requires no respirator or specialized

hazardous training

Part Mfg Part Order Number Container Size

4175

4175G4 110469158 1 gallon4175P 110469159 5 gallon pail 4175D 110469160 55 gallon drum

4175T275 110469161 275 gallon tote

3Industrial Supplies and Expertise

Specialty Industrial Cleaners

AEROGREEN AC-10 RUST REMOVER AND METAL PREP is a water based, phosphoric acid and detergent blend specially formulated to remove rust and oxidations from metal surfaces and help to clean and profile metal surfaces. Ideal for removing rust stains from concrete and masonry / brick surfaces before applying a coating, stain or sealer. Safe for use on galvanized metal surfaces. Depending on the surface to be cleaned, this clear, odorless, innovative product can be diluted with water and brushed on, sprayed on, or used in cold or heated dip tanks for impressive results. Non-flammable, non-combustible and non-hazardous, state-of-the-art Solutions AC-10 Rust Remover and Metal Prep can be utilized in areas with limited ventilation. Safe to use, environmentally friendly, yet strong enough to get the job done, Solutions AC-10 is the only rust remover and metal prep you’ll ever need.

AC-10 was developed for use on:• Steel: Removes rust and flash rust from

steel surfaces and leaves a corrosion inhibiting residue which prevents rusting and aids in coating adhesion

• Galvanized Metals: Improves adhesion by removing white rust or oxidation on surface

• Concrete: Cleans and degreases concrete surfaces to prepare the surface for paint, sealer or other coatings and reduces preparation time by eliminating the separate pre-cleaning and rinsing operation before acid etching on concrete

• Masonry / Brick / Concrete: Removes rust stains occurring from contact with rusted metal structures such as pipes, railings, stairs and rust that is deposited from iron in the water supply

Part Mfg Part Order Number Container Size

AC10

AC10G4 110469163 1 gallonAC10P 110469164 5 gallon pail AC10D 110469165 55 gallon drum

AC10T275 110469166 275 gallon tote

AEROGREEN 4180 Paint and Graffiti Remover is the latest breakthrough in solvent replacement cleaning technology used to safely soften paint from concrete surfaces. AEROGREEN 4180 is an eco-friendly graffiti remover that is low in odor, non-hazardous, non-flammable, non-corrosive and biodegradable. AEROGREEN 4180 removes graffiti from a variety of substrates including: brick, stone, concrete, marble, granite, tile, stucco, wood and other surfaces including steel, cast iron, aluminum and metal surfaces.

Features and Benefits• Made of 100% natural ingredients from

renewable resources • Non-toxic, biodegradable soy-based,

environmentally-friendly alternative to harsh chemicals

• Equally effective on oil-based and latex paint • Can be used in hand wipe with a pressure washer or in batch immersion systems• Safe soybean formula contains no caustic alkalis to burn skin or eyes • Simple clean-up; just rinse with water

Part Mfg Part Order Number Container Size

4180

4180QT12 111463622 32 oz.4180G4 110469168 1 gallon4180P 110469169 5 gallon pail 4180D 110469170 55 gallon drum

4180T275 110469171 275 gallon tote

STAY IN PRODUCTION

Specialty Industrial Cleaners

Contact Your Local Applied® Service Center

1-877-279-2799

© 2015 Applied Industrial Technologies, Inc. All Rights Reserved. IN-0615-20-9520rev2

Authorized distributor:

Corporate Headquarters

1 Applied Plaza

Cleveland, Ohio 44115

Toll Free Phone: 1-877-279-2799

Applied.com

WARNING: Injury, death, property damage,

and/or equipment failure may result from

the misuse or misapplication of the products

featured in this publication. The information in

this publication is provided “AS IS,” WITHOUT

ANY WARRANTY OF THE INFORMATION’S

ACCURACY OR THE PRODUCTS’ SUITABILITY

FOR ANY PARTICULAR USE.