4
INSTA CERT LICENCE Revision 6 of 2013-11-25 LICENCE OF CERTIFICATION Date: No./Version: First version granted: Licensee’s name and address Marks covered by licence: Information regarding licensee/manufacturer Licensee’s technical officer Telephone Telefax Email Manufacturer Place of manufacture Product covered by the licence Type of product Standard/Other normative document Specific rules Specification of product The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products. Unless terminated, the certification license will be automatically extended for one year at a time. The licence will be re-issued with a new “date of valid edition” only if the content and/or conditions of the licence have been changed. Termination may take place to the end of a year subject to three months’ notice on the part of the licence holder and the certification body The licence is not transferable. MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Tomi Kasurinen, Managing Director 2014-04-25 4077-12 Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA Non-pressure underground PP pipes and fittings according to Annex 1. Approved raw materials according to Annex 2 (confidential). Inspection of production place: SP FX011487, SP FX112026. Jaana Hallikas +358 20 129 211 +358 20 129 210 [email protected] Plastic piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Fristad, Sweden SBC 13476 EN 13476 2010-05-31

Insta cert 4077 regnvand iq fristad se

Embed Size (px)

DESCRIPTION

https://www.uponor.dk/~/media/countryspecific/denmark-infra/download-centre/godkendelser/insta-cert-4077-regnvand-iq-_fristad_se.pdf?version=9

Citation preview

Page 1: Insta cert 4077 regnvand iq fristad se

INSTA CERT LICENCE Revision 6 of 2013-11-25

LICENCE OF CERTIFICATION

Date: No./Version:

First version granted:

Licensee’s name and address Marks covered by licence:

Information regarding licensee/manufacturer

Licensee’s technical officer

Telephone

Telefax

Email

Manufacturer

Place of manufacture

Product covered by the licence

Type of product

Standard/Other normative document

Specific rules

Specification of product

The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This

also applies to defective or faulty products.

Unless terminated, the certification license will be automatically extended for one year at a time. The licence will be re-issued with a new “date of valid edition” only if the content and/or conditions of the licence have been changed. Termination may take place to the end of a year subject to three months’ notice on the part of the licence holder and the certification body The licence is not transferable.

MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY

Tomi Kasurinen, Managing Director

2014-04-25 4077-12

Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA

Non-pressure underground PP pipes and fittings according to Annex 1. Approved raw materials according to Annex 2 (confidential). Inspection of production place: SP FX011487, SP FX112026.

Jaana Hallikas +358 20 129 211 +358 20 129 210

[email protected]

Plastic piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE).

Fristad, Sweden

SBC 13476

EN 13476

2010-05-31

Page 2: Insta cert 4077 regnvand iq fristad se

Annex 1 Sivu 1 (3) Licence of certification No. 4077-12 Date 2014-04-25

Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA

Trade name Material Colour - outer layer - inner layer Wall construction Ring stiffness Application area - Dimensions/ID; mm (- size groups 1 and 2) Application area - Dimensions/ID; mm (- size groups 2 and 3) Trade name Material Colour - outer layer - inner layer Wall construction Ring stiffness Application area - Dimensions/OD; mm (- size groups 2 and 3) - Dimensions/ID; mm (- size group 3)

UPONOR UNDERGROUND DRAINAGE UPONOR IQ pipes PP black grey B SN 8 UD 200 and 300 U 400, 500, 600 and 800 UPONOR Ultra Double PP brown grey B SN 8 U 450 and 560 600

SP F908835, SP F923937 SP F923936, SP FX011487 TÜV 2009 10 S 1378 404/4, SP FX012611 SP FX100218, SP FX106793A SP FX 022141, SP FX108121

Page 3: Insta cert 4077 regnvand iq fristad se

Annex 1 Sivu 2 (3) Licence of certification No. 4077-12 Date 2014-04-25

Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA

Trade name Material Colour - outer layer - inner layer Wall construction Ring stiffness Application area - Dimensions/OD, mm (- size groups 1 and 2) Application area - Dimensions/OD, mm (- size groups 2 and 3) Trade name Material Colour - outer layer - inner layer Wall construction Ring stiffness Application area - Dimensions/OD, mm Trade name Material Colour Wall construction Ring stiffness Application area Socket pipes - Dimensions/ID, mm (- size groups 2 and 3)

UPONOR UNDERGROUND DRAINAGE Ultra Rib 2 PP reddish brown grey B SN 8 UD 110 - 315 U 400 - 1200 Ultra Classic -pipes PP brown or black brown or grey A1 SN4 and SN8 UD 110 and 160 Uponor Weholite PE -pipes PE black A2 SN4 and SN8 U 400 - 1000

SP FX004279 INSTA-CERT licence 4041-05 SP FX122742, SPFX109356A SP FX114121 SP FX100218 INSTA-CERT -licence 5097

Page 4: Insta cert 4077 regnvand iq fristad se

Annex 1 Sivu 3 (3) Licence of certification No. 4077-12 Date 2014-04-25

Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA

Pipes without socket - Dimensions/ID, mm (- size group 3) Designation of production place

1200 5