7/30/2019 MaterialData_78513
1/1
Some of the values displayed above may have been converted from
their original units and/or rounded in order to display the
information in a consistent format. Users requiring more precise
data for scientific or
engineering calculations can click on the property value to see
the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw
conversions in yourcalculations to minimize rounding error. We also
ask that you refer to MatWeb's disclaimer and terms of use
regarding this information. Click here to view all the property
values for this datasheet as they were
originally entered into MatWeb.
Overview of materials for PVC, High Impact
Categories: Polymer; Thermoplastic; Vinyl; PVC, High Impact
Material
Notes:
This property data is a summary of similar materials in the
MatWeb database for the category "PVC, High Impact". Each property
range of values reported is
minimum and maximum values of appropriate MatWeb entries. The
comments report the average value, and number of data points used
to calculate the
average. The values are not necessarily typical of any specific
grade, especially less common values and those that can be most
affected by additives or
processing methods.
Vendors: Click here to view all available suppliers for this
material.
Please click here if you are a supplier and would like
information on how to add your listing to this material.
Physical Properties Metric English Commen
Density 0.785 - 1.52 g/cc 0.0284 - 0.0549 lb/in Average value:
1.24 g/cc Grade Count:1
Water Absorption 0.200 - 3.00 % 0.200 - 3.00 % Average value:
2.07 % Grade Coun
Linear Mold Shrinkage 0.00200 - 0.00500 cm/cm 0.00200 - 0.00500
in/in Average value: 0.00350 cm/cm Grade Count:
Spiral Flow 58.4 - 112 cm 23.0 - 44.1 in Average value: 70.2 cm
Grade Count:
Mechanical Properties Metric English Commen
Hardness, Rockwell R 100 - 107 100 - 107 Average value: 104
Grade Count:
Hardness, Shore D 74.0 - 84.0 74.0 - 84.0 Average value: 80.5
Grade Count:
Tensile Strength, Ultimate 30.0 - 44.1 MPa 4350 - 6400 psi
Average value: 40.6 MPa Grade Coun
Tensile Strength, Yield 35.2 - 53.4 MPa 5110 - 7750 psi Average
value: 44.9 MPa Grade Count:
Elongation at Break 26.0 - 50.0 % 26.0 - 50.0 % Average value:
40.7 % Grade Count:
Elongation at Yield 5.00 - 10.0 % 5.00 - 10.0 % Average value:
6.67 % Grade Coun
Modulus of Elasticity 1.90 - 3.30 GPa 276 - 479 ksi Average
value: 2.58 GPa Grade Count:1
Flexural Modulus 1.91 - 3.21 GPa 277 - 466 ksi Average value:
2.65 GPa Grade Count:1
Flexural Yield Strength 61.9 - 92.4 MPa 8980 - 13400 psi Average
value: 78.5 MPa Grade Count:1
Dart Drop Total Energy 44.5 - 280 J/cm 0.0834 - 0.525 ft-lb/mil
Average value: 120 J/cm Grade Count:
40.0 - 66.7 J/cm@Temperature 0.000 - 0.000 C
0.0749 - 0.125 ft-lb/mil@Temperature 32.0 - 32.0 F
Average value: 46.4 J/cm Grade Coun
Izod Impact, Notched 0.600 - 14.0 J/cm 1.12 - 26.2 ft-lb/in
Average value: 7.89 J/cm Grade Count:1
0.534 - 11.7 J/cm@Temperature -40.0 - 10.0 C
1.00 - 21.9 ft-lb/in@Temperature -40.0 - 50.0 F
Average value: 3.21 J/cm Grade Count
0.534 - 11.7 J/cm@Thickness 3.18 - 3.18 mm
1.00 - 21.9 ft-lb/in@Thickness 0.125 - 0.125 in
Average value: 3.21 J/cm Grade Count
Thermal Properties Metric English Commen
CTE, linear 50.0 - 140 m/m-C 27.8 - 77.8 in/in-F Average value:
69.9 m/m-C Grade Count:
Deflection Temperature at 0.46 MPa (66 psi) 64.4 - 93.9 C 148 -
201 F Average value: 79.2 C Grade Count:
Deflection Temperature at 1.8 MPa (264 psi) 19.4 - 87.8 C 66.9 -
190 F Average value: 69.2 C Grade Count:
Vicat Softening Point 78.0 - 81.0 C 172 - 178 F Average value:
80.3 C Grade CounUL RTI, Electrical 29.4 - 90.0 C 84.9 - 194 F
Average value: 62.6 C Grade Count:
UL RTI, Mechanical with Impact 10.0 - 85.0 C 50.0 - 185 F
Average value: 55.5 C Grade Count:
UL RTI, Mechanical without Impact 29.4 - 90.0 C 84.9 - 194 F
Average value: 62.6 C Grade Count:
Flammability, UL94 V-0 - 5VA V-0 - 5VA Grade Count
Oxygen Index 30.0 % 30.0 % Average value: 30.0 % Grade Coun
Optical Properties Metric English Commen
Haze 4.00 % 4.00 % Average value: 4.00 % Grade Coun
Transmission, Visible 7.50 - 86.5 % 7.50 - 86.5 % Average value:
74.5 % Grade Count:
Processing Properties Metric English Commen
Processing Temperature 174 - 213 C 345 - 415 F Average value:
198 C Grade Count:
MatWeb, Your Source for Materials Information - WWW.MATWEB.COM /
Page 1 /
http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=10http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=12http://www.matweb.com/search/GetVendors.aspx?matguid=61176b35d92c4a5e9834c7a97a989fc3http://www.matweb.com/services/advertising.aspxhttp://www.matweb.com/tools/unitconverter.aspx?fromID=171&fromValue=0.525http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=26.2http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=64.4http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=93.9http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=78.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=81.0http://www.matweb.com/search/datasheet.aspx?matguid=61176b35d92c4a5e9834c7a97a989fc3&n=1http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=415http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=345http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=213http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=174http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=194http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=84.9http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=90.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=29.4http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=185http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=85.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=10.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=194http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=84.9http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=90.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=29.4http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=178http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=172http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=81.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=78.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=190http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=66.9http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=87.8http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=19.4http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=201http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=148http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=93.9http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=64.4http://www.matweb.com/tools/unitconverter.aspx?fromID=4&fromValue=77.8http://www.matweb.com/tools/unitconverter.aspx?fromID=4&fromValue=27.8http://www.matweb.com/tools/unitconverter.aspx?fromID=5&fromValue=140http://www.matweb.com/tools/unitconverter.aspx?fromID=5&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=21.9http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=11.7http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.534http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=21.9http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=11.7http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.534http://www.matweb.com/search/GraphConditionalData.aspx?matguid=61176b35d92c4a5e9834c7a97a989fc3&propid=443&sigid=15http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=26.2http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=1.12http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=14.0http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.600http://www.matweb.com/tools/unitconverter.aspx?fromID=171&fromValue=0.125http://www.matweb.com/tools/unitconverter.aspx?fromID=171&fromValue=0.0749http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=66.7http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=40.0http://www.matweb.com/search/GraphConditionalData.aspx?matguid=61176b35d92c4a5e9834c7a97a989fc3&propid=204&sigid=1http://www.matweb.com/tools/unitconverter.aspx?fromID=171&fromValue=0.525http://www.matweb.com/tools/unitconverter.aspx?fromID=171&fromValue=0.0834http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=280http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=44.5http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=13400http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=8980http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=92.4http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=61.9http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=466http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=277http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=3.21http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=1.91http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=479http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=276http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=3.30http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=1.90http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=7750http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=5110http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=53.4http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=35.2http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=6400http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=4350http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=44.1http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=30.0http://www.matweb.com/tools/unitconverter.aspx?fromID=52&fromValue=44.1http://www.matweb.com/tools/unitconverter.aspx?fromID=52&fromValue=23.0http://www.matweb.com/tools/unitconverter.aspx?fromID=23&fromValue=112http://www.matweb.com/tools/unitconverter.aspx?fromID=23&fromValue=58.4http://www.matweb.com/tools/unitconverter.aspx?fromID=140&fromValue=0.00500http://www.matweb.com/tools/unitconverter.aspx?fromID=140&fromValue=0.00200http://www.matweb.com/tools/unitconverter.aspx?fromID=148&fromValue=0.00500http://www.matweb.com/tools/unitconverter.aspx?fromID=148&fromValue=0.00200http://www.matweb.com/tools/unitconverter.aspx?fromID=87&fromValue=0.0549http://www.matweb.com/tools/unitconverter.aspx?fromID=87&fromValue=0.0284http://www.matweb.com/tools/unitconverter.aspx?fromID=43&fromValue=1.52http://www.matweb.com/tools/unitconverter.aspx?fromID=43&fromValue=0.785http://www.matweb.com/services/advertising.aspxhttp://www.matweb.com/search/GetVendors.aspx?matguid=61176b35d92c4a5e9834c7a97a989fc3http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=1136http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=28http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=12http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=10
