Matsuura Mam72 63v

MAM72-63V5-axis Vertical Machining Center

EJ-E1.2 200605 3000 S

Printed on recycled paper.

Website : www.matsuura.co.jpe-mail : [email protected]

MATSuuRA MACHINERy CORPORATION1-1 Urushihara-cho Fukui City 910-8530, Japan<Tel> +81-776-56-8106 <Fax> +81-776-56-8151

MATSuuRA EuROPE GmbHOtto-Von-Guericke-Ring 10a 65205 Wiesbaden-Nordenstadt, Germany<Tel> +49-6122-7803-80 <Fax> +49-6122-7803-33<e-mail> [email protected]<Website> www.matsuura.de

MATSuuRA MACHINERy PLCBeaumont Center Whitwick Business Park, Coalville Leicestershire LE67 4NH, England<Tel> +44-1530-511-400 <Fax> +44-1530-511-440<e-mail> [email protected]<Website> www.matsuura.co.uk

MATSuuRA MACHINERy GmbHOtto-Von-Guericke-Ring 10a 65205 Wiesbaden-Nordenstadt, Germany<Tel> +49-6122-7803-0 <Fax> +49-6122-7803-33<e-mail> [email protected] <Website> www.matsuura.de

ELLIOTT MATSuuRA CANADA INC.2120 Buckingham Road Oakville Ontario L6H 5X2, Canada<Tel> +1-905-829-2211 <Fax> +1-905-829-5600<e-mail> [email protected]<Website> www.elliottmachinery.com

MMTS CORPORATION65 Union Avenue Suite2, Sudbury Massachusetts 01776, U.S.A.<Tel> +1-978-443-5388 <Fax> +1-978-443-9524

Products are subject to all applicable export control laws and regulations.

MAM72-63V

MAM72-63V PC2

MAM72-63V PC6

● Product specifications and dimensions are subject to change without prior notice.

● The photos may show optional accessories.

� �

MAM72-63V x �+ PC�5 Linear Pallet System

Pioneer of High Speed Spindles● Matsuura in a pioneer of High Speed Spindles and High Speed Machining.

You can be assured that Matsuura's many decades of experience, skill and know how have all been incorporated into the business end of the MAM72-63V - the Hi- Tech Spindle. Spindle options to suit every application and every industry are available.

● Matsuura's MAM72 Series of machines has always enabled users to achieve long periods of reliable unmanned production as standard. The MAM72-63V is launched with a vast array of cost effective, production enhancing options.

Cutting of Delicate and Complicated Shapes● Utilizing angular cutting with simultaneous 5-axis control, the machining of

very delicate and highly complicated component shapes with inherent high accuracy is achieved effortlessly through the MAM72 Series of machines.

Optimum Performance● Dedicated 5-axis machines can cut at all angles, significantly reducing

machining time per component. Excellent rapid traverse rates and superb positional accuracy minimize non-cutting times.

Elimination of Errors Between Setups & Fixtures

● Because components on 5-axis machines are completed in one loading and one set up, errors between set ups and different fixtures are eliminated, adding to the precision of the process.

Vast Reduction of Set-Up Times● The very nature of 5-axis machining is to complete the component in "one

hit", therefore greatly reducing set-up times, and in some cases eliminating them almost completely.

Reliable Unmanned Production

Matsuura MAM72 SeriesThe Clear Leader in 5-axis Machining

�

For almost a decade, Matsuura's MAM72 Series of simultaneous 5 -axis machines has been the clear market leader for machines in their class.

Highly productive and reliable excellence through constant and cost effective innovation are the main reasons why the MAM72 Series has maintained its leading position over the years, throughout all its model variants.

Meeting the global market demand for ever lower costs, shorter delivery times, long periods of unmanned production and elimination of set up times have led the way for Matsuura to produce high quality, cost effective 5-axis machines and processes.

Incorporating the vast experience Matsuura has gained over the years in high performance 5 -axis machining, the market now has a clear choice for the cost effective "one hit machining" of tolerance critical, large and complex components - the MAM72-63V

� 5

Travel X/Y/Z : 760 / 845 / 610 mm

: (29.92 / 33.26 / 24.01 in.)

Travel A/C : -110 ~ +110 / 360 deg

Max. Work Size : Ø720 x H450 mm

: (Ø28.3 x H17.7 in.)

Max. Work Weight* : 400 kg (880 lb.)

*with limitation : 600 kg (1,320 lb.)

Travel X/Y/Z : 760 / 845 / 610 mm

: (29.92 / 33.26 / 24.01 in.)

Travel A/C : -110 ~ +10 / 360 deg


: (Ø24.8 x H17.7 in.)

Max. Work Weight* : 350 kg (770 lb.)

*with limitation : 550 kg (1,200 lb.)

5-axis Vertical Machining Center



MAM72-63V PC2

MAM72-63V

MAM72-63V PC6

● Equipped with Compact Twin Pallet Changer

● Equipped with Compact 6-Pallet-Changer for Long Periods Unmanned Operation

OPT.

STD.

● Single Table

�

MAM72-63V5-axis Vertical Machining Center

The 5-axis Machine for all Industries

Unique 4/5th Table

Highly Rigid Construction

Largest Working Envelope in its Class

Excellence Swarf Management

Matsuura Hi-Tech Spindle

Dedicated 5-axis Machining

Matsuura G-Tech 30i /840DI (NC Control)

MAM72-63V PC17Linear Pallet Sysem

MAM72-63V PC35

OPT.

OPT.

6 7

● Incorporating a new Matsuura design, the "Flip Up Arm" APC on the multi pallet variants of the MAM72-63V greatly reduces the machines overall footprint of the machine.

PC2 : 2-Pallet Changer

● Compact 6 pallet system

Linear Pallet System● Matsuura designed and built Linear Pallet System

offers manufacturers a truly flexible and high speed manufacturing system. Compatible and fully integrated across our range of Horizontals and 5 -axis machines, the system consists of a two stage pallet storage stacker, work stations and stacker crane vehicle.

● With multiple installations in various configurations all over the world, Matsuura's Linear Pallet System will offer your business years of unmatched, reliable productivity and operation.

● 4 and 5 -axis machines (horizontal and vertical) can all be served by the same Linear Pallet System, providing they have the same pallet dimensions.

5.1 m (200.7 in.)

Vast Array of Productivity Enhancing OptionsMatsuura Hi-Tech Spindles

● Both BT40 and BT50, Matsuura Hi-Tech spindles are available.

Diameter :

96 mm(3.77 in.)*1

Weight :

10 kg(22 lb.)

Length : 350 mm (13.7 in.)

Diameter :

80 mm(3.15 in.)*�

Weight :

10 kg(22 lb.)

Length : 350 mm (13.7 in.)

*1 : 175 mm (6.88 in.) : When the pots on both sides are empty.

Max. Tool

Pallet to Pallet : 24 sec.

PC6 : 6-Pallet Changer

OPT.

OPT.

OPT.

30,000 min-1

20,000 min-1

15,000 min-1

12,000 min-1

12,000 min-1

OPT.

STD.

OPT.

OPT.

STD.

BT40 Tool Storage

BT50 Tool Storage

● No. of Tools ● No. of Tools90/120/150/180/210/240 tools

● No. of Tools ● No. of Tools 150/180/210/240 tools

*2 : 150 mm (5.90 in.) : When the pots on both sides are empty.

BT40 : Matrix Type Tool MagazineBT40 : Chain-pot Type Tool Magazine

Max. Tool

BT50 : Matrix Type Tool MagazineBT50 : Chain-pot Type Tool Magazine

BT40 : Spindle Line-up

BT50 : Spindle Line-up

OPT.

STD.

OPT.30 tools

40/80 tools

OPT.

60 tools 120 toolsSTD. OPT.

240 tools80 tools40 tools

240 tools120 tools60 tools

8 9

Rapid Traverse rate (A/C) : 25 / 50 min-1

Max. Acc. (A/C) : 500 / 1,700 deg/sec2

Rotation Torque (A/C) : 1,728 / 528 Nm

Clamping Force (A/C) : 3,150 / 2,760 kN

Min. Indexing (A/C) : 0.001 deg

Indexing Accuracy (A/C) : 5 sec.

Repeatability (A/C) : ± 2 sec.

High Speed, Highly Accurate Rotation

● Highly accurate and reliable motors have been chosen for the table rotation on the MAM72-63V, offering the minimum indexing angle and maximum high speed positioning. High speed and high torque are inherent characteristics of the motors used.

● Due to the robust design of the 4/5th table, configured with A/C -axis scale feedback as standard, high accuracy is assured.

● To further enhance the inherent and sustained high accuracy of the machine, the counter balance cylinder on the A -axis contributes significantly over long periods of machining - even at full tilt with a heavy component loaded.

MAM72-63V PC2 4/5th table. Optional pallet is for the hydraulic jig clamping unit.

Robust and Compact 4/5th Table, In-house Design

● Integrated into the design of the MAM72-63V, the Matsuura 4/5th table has been designed in-house using FEM analysis. Configured with robust twin side supports, the table achieves maximum design rigidity.

● High structural stability - essential for high accuracy.

● 4/5th Table is placed in the optimal position on the Y -axis span.

● Matsuura's MAM72 Series of machines are dedicated 5 -axis machines.

Dedicated and Integrated - 4/5th Table Designed by Matsuura

A-axis Travel : 220 deg, Y-axis Travel : 845 mm (33.26 in.)

Tailstock

View from the front the work station.

X-axis : 760 mm (29.92 in.)

Y-axis : 845 mm (33.26 in.)

Z-axis : 610 mm (24.01 in.)

A-axis : -110 ~ +110 deg

A-axis (PC2) : -110 ~ +10 deg

C-axis : 360 deg

Travel

4/5th Table Specification

OPT.

10 1111

● The spindle is able to travel over all the X/Y/Z -axis range without interference from machine structure.

(NOTE : This is on the assumption that there is no workpiece, the A-axis is at the zero point and spindle tooling is removed.)

Largest Working Envelope

LARGER WORK SIZE ACCEPTABLE

● Larger sized components than shown in the diagram can be accommodated with restrictions.

● eg. 600 kg (1,320 lb.) work weight is acceptable with restrictions.

● Please consult Matsuura when requiring Larger size.

Largest Work Size in its Class

Built In Safety

● Red line shows the spindle's movement area range.

Highly Rigid StructureExtremely Stable Construction

● Significant ribbing of bed and column - designed and optimized by FEM analysis.

● The massive bed, supported at 10 points offers, total stability - despite the vast inertia forces generated by all axes during rapid acc./dec.

Large Guide Width, Rigid Linear Guides● The three ball grooves design of the all axes (X/

Y/Z) guides assures highly accurate movement and positioning.

● To support longevity of the machine and maintain high accuracy, parallelism and straightness of the linear guides is set within 2µm (at Full stroke) during manufacturing.

Rapid Traverse (X/Y/Z) : 50 m/min (1,968.5 ipm)

Rapid Traverse Acc. (X/Y/Z) : 0.61 / 0.77 / 0.94 G

Feedrate (X/Y/Z) : 50 m/min (1,968.5 ipm)

Feedrate Acc. (X/Y/Z) : 0.4 G

Feedrate


: (Ø28.3 x H17.7 in.)

Max. Work Weight : 400 kg (880 lb.)

MAM72-63V


: (Ø24.8 x H17.7 in.)

Max. Work Weight : 350 kg (770 lb.)

MAM72-63V PC2 / PC6

Ø720 mm

H45

0 m

m

Table Size : Ø500 mm Pallet Size : 500 mm

High Speed, Highly Accurate Traverse

Ø630 mm

H45

0 m

m

(Ø28.3 in.)

(H17

.7 in

.)

(H17

.7 in

.)

(Ø24.8 in.)

(Ø19.68 in.) ( 19.68 in.)

OPT.STD.

● Max. work size is restricted by the options. ● Max. work size is restricted by the options.

12 13

40°

Bed Section

Coolant Tank Capacity : 600L (158 gal.)

● This system, installed at the outlet of the conveyor, captures most of the chips stuck to the conveyor plates and reduces the volume of coolant outflow.

(1) Large chips fall down at the outlet of the conveyor. The reduced area of the outlet contributes to the reduction of coolant outflow.

(2) Smaller chips are freed from the conveyor plates as they travel through the chip separation tank. Excess coolant falls into the separation tank and is then returned to the main tank.

(3) The separated chips are fed into the screw tank which drives them through the twist chute into a chip bin.

Chip Capturing System

● Protective covers feature steep 40 degree angle slopes with minimal projections to ensure the easy flow of chips and swarf.

● The twin spiral conveyors have a 106 mm (4.17 in.) diameter pitch. These are placed on the left and right hand sides of the machine base and effectively remove chips into a coolant tank situated at the rear of the machine.

Lift-Up Chip Coveyor + Drum FilterReliable Swarf ManagementSteep Slopes and Two Spiral Conveyors

MAM72-63V PC2 4/5th table. Optional pallet is for the hydraulic jig clamping unit.

OPT.

Twist chute

(1)(2)

(3)

Screw

Chip-separation tank

Flow of swarf

● Cleaning nozzles wash the chips stuck to the filters into the chip conveyor.

● Only clean, chip-free coolant is returned to the coolant tank.

● These filters capture excess chips that escape the chip capturing system.

Hyper Disk Filters

Photo includes optional 20 bar unit.

(Image of Hyper Disk Filter)

● This system is suitable to machine with the water-soluble coolant. In case of using the oily coolant, however, please contact Matsuura without hesitation.

STD.

14 15

● The standard, double contact of the face and taper, unification of the spindle and drive key features a unique tool clamp mechanism to improve repeatability and stationary/dynamic rigidity. This results in excellent material removal rates and surface finish.

● Matsuura's Spindle Engineers work in a dedicated Clean Room complex to assure the highest standards of build quality & reliability. Our ultra precision spindles are guaranteed to have a runout of less than 1 µm (0.000039 in.) as actual measured value at the spindle nose.

● The spindle and the motor are connected by Matsuura's unique coupling. This assembly is designed to prevent the heat from being transferred from the motor to the spindle & contributes to the high accuracy of the spindle.

Designed & Assembled “IN-HOUSE”

Unique Spindle Coupling

● To minimize heat buildup in the spindle, cooled oil is circulated around the outer jacket of the spindle thus sustaining its high accuracy.

Spindle Specification

Spindle Speed (BT40) : 12,000 min-1

Bearing Lubrication : Grease

High Speed Spindle Options



Bearing Lubrication : Oil-Air




Spindle Cooling

Double Face Contact

Matsuura Hi-Tech Spindle BT50 Spindle Options




Spindle Thermal Displacement Compensation Function




Ø25, 2 teeth(W22mm, D8mm)

12,00010,000

1,760Ø20, 4 teeth(W3mm, D35mm)

5,5005,500

578


1,1203,000

630

A50

52

Ø35 1,500

700673

Ø35 1,500

320308

M36 x P4.0

120480

M30xP3.5

100350

S�5

C

1�� 1��

Face Mill End Mill Drill Tap


5,5008,0002,800

Cutting Performance1. Spindle Speed (min-1) 2. Feedrate (mm/min)3. Removal Rate (cc/min)

Matsuura G-Tech 840DI

Matsuura G-Tech 30i

Matsuura G-Tech 840DI Matsuura G-Tech 30i


Matsuura G-Tech 30i


Matsuura G-Tech 30i

Matsuura G-Tech 30i

● By utilizing the spindle thermal displacement compensation function, the sustained accuracy of this outstanding machine is assured over many years of operation.

OPT.

STD.

OPT.

OPT.

OPT.

OPT.

16 17

NC Functions

● When utilizing this software, setting the required part accuracy level is quick, simple and user friendly, allowing you to prioritize precision against speed.

IPC

● Tool Center Point Control (TCPC)

For 5-axis MachiningMatsuura G-Tech 30i

Matsuura G-Tech 30i Matsuura G-Tech 840DI


Matsuura G-Tech 30i

IZ-1/15F

*max.1,000 block available as option.

● Executing the max. 200(IZ-1/30NF) or 600*(IZ-2/150NF)-block look ahead linear acc./dec. before interpolation achieves a smooth acc./dec. across the multiple blocks calculated by nano order.

Machining for General Parts or Mold & Die

IZ-1/30NF, IZ-2/150NF(Look Ahead Linear Ace./dec.+nano interpolation)

FEATuRES

● High speed CPU and FSSB, internal CNC bus, optical fiber cables used for high speed data transfer.

● Nanometer resolution.

● 10.4 inch color LCD, soft keys vertically arranged, Compact Flash Port, PC file management structure.


State-of-the-art NC System

Matsuura G-Tech 30i

Advanced Zee LagY

● After compressing a maximum of 50 blocks and engaging the 100 Block Look Ahead function, IZ-1/COMP interpolates & applies to the B-Spline to the nearest point selected.

IZ-1/COMP(Max.5,000 Block Look Ahead + Spline Interpolation)

Machining for more Complex, Precision Parts

FEATuRES

● Equipped with the latest high performance CPU, Windows XP-Professional, graphical user interface, USB port.

● 10.4 inch color LCD, soft keys vertically arranged.

● Faster editing, machine power on/off.

FOR HIGH SPEED AND FINER MACHINED SuRFACE

FOR HIGH SPEED AND FINER MACHINED SuRFACE

Machining for General Parts or Mold & Die

Machining for more Complex, Precision Parts

Interference Simulation● By installing the MAM72-63V

machine 3D dimensions into a simulation software package, users can detect collisions and crashes before the program to be executed is loaded into the machine NC.

3rd Party Software

Program Command

Table Rotation

Table Tilt

● Programing this function offers several advantage. In particular the program is independent of the tool length and machine kinematics; the feedrate relates to the tool center point, and compensation movements the rotary axis movements are performed automatically.

Tool center point moves according to the program command with table tilt/rotation.

OPT.

STD.

OPT.

STD.

OPT. OPT.

STD.

OPT.

● A package of convenient NC functions to simplify programming and reduce set-up time for 5-axis machining.

● A NC package providing performance enhansing functions for high speed and high precision machining, such as required mold & die parts.

NC Package

5-axis Related Option Package

High Speed High Precision Package

● Matsuura have a wide range of highly focused productivity enhancing options for both the Matsuura G-Tech 30i and Matsuura G-Tech 840DI. Call Matsuura for a full and comprehensive list.

5-axis Transformation

● Tool Diameter Offset for 5-axis Machining● Tilted Working Plane Command

18 1919

Operation Support

Easy Maintenance

Easy Programming

Superb Access

Intelligent Functionality : Simple, Quick, Easy to Use

Easy Set-Up

Work Piece Measurement

Matsuura G-Tech 30i Matsuura G-Tech 840DI

Machine Front Side

Operator Side

Machine Front Side and Operator Side

● A tool offset list can be created and displayed from any program. As this function is linked to the ATC and TLM operations, tool setting time can be significantly reduced and errors practically eliminated.

Offset Value List

Tool Length Measurement● Simple, on-screen instructions lead you to the

tool measurement process. The data created is automatically stored in the offset value list.

● Nine sets of M code counters are supplied for counting the number of workpieces, tool life, etc.

● You can view in real time simulation of a work piece being machined before using the program for the actual component.

● Machining programs can be automatically created by entering data in response to on-screen prompting. Once entered, this data can be displayed as a 3D solid model.

● The G10 conversion screen offers a function for converting work co-ordinate shift values to a program using G10 (programmable data input).

● General periodic inspection and oil inspection intervals are shown on the screen in relation to the machine operating time.

● The center of any workpiece can be detected and measured by following the on-screen instructions. The workpiece data will automatically be set in the co-ordinate value list.

● All alarm messages are recorded into the control memory, along with the time and date.

● On-screen graphics clearly inform the user of the ATC / APC's condition, position and motion during recovery operation.

ATC / APC Trouble Shooting

Alarm Message

Periodic Inspection

NC 3D graphic display M Code Counters

Conversational ProgrammingG10 Conversion

* About the images above are in case of Matsuura G-Tech30i

FY

20 21

Machine Size

• D1*,D2*D3* : With optional lift-up chip conveyor.

• W2*, W3* : With optional matrix type 240 tool magazine.

• H : 3,249 mm (127.9 in.) : in case of Matsuura G-Tech 840DI

Table Size Pallet Size

HH

H

W1

W2*

W3*

D1

D3

D1*

D2

D2*

D3*

MAM72-63V Machine Size

Width W1 : 2,719 mm (107.0 in.)

Distance D1 : 4,734 mm (186.3 in.)

D1* : 5,512 mm (217.0 in.)

Hight H : 3,225 mm (126.9 in.)

Weight : 14,500 kg (32,000 lb.)

MAM72-63V PC2 Machine Size

Width W2 : 3,028 mm (119.2 in.)

Distance D2 : 5,770 mm (227.1 in.)

D2* : 6,542 mm (257.5 in.)

Hight H : 3,225 mm (126.9 in.)

Weight : 15,000 kg (33,000 lb.)

MAM72-63V PC6 Machine Size

Width W3* : 3,713 mm (118.8 in.)

Distance D3 : 6,765 mm (195.6 in.)

D3* : 7,537 mm (220.5 in.)

Hight H : 3,225 mm (126.9 in.)

Weight : 19,000 kg (42,000 lb.)

MAM72-63V nonPC MAM72-63V PC2 / PC6

MAM72-63V nonPC

Floor Plan

MAM72-63V PC2

MAM72-63V PC6

��

MAM72-63V Spindle Movement Interference

MAM72-63V PC2 / PC6 Spindle Movement Interference

MAM72-63V Machine Specifications MAM72-63V Options

*1 : In case of MAM72-63V PC2 / PC6

*2 : With conditions, 600 kg (1,320 lb.) is acceptable. : 550 kg (1,200 lb.) PC2*3 : Please consult Matsuura when requiring larger size.*4 : Depending on options*5 : Measured in temperature controlling room. (±2°C)

Standard Accessories01. Total Splash Guard 02. Door Interlock for operator door 03. ATC auto Door 04. Synchronized Tapping05. AD-TAP Function 06. IPC Function 07. Spindle Oil Cooler 08. Coolant Tank09. Spiral Chip Conveyor (R&L) 10. Removable Pulse Generator 11. Spindle Overload Protection 12. 9 sorts of M-code counters 13. Work Light 14. Std. Mechanical Tools & Tool Box 15. Machine Color Paint 16. Leveling Pads and Bolts17. Scale Feedback System (A/C) 18. Handy Man II F, Y 19. CD-ROM for Memory Card Operation

760 mm (29.92 in.)845 mm (33.26 in.)610 mm (24.01 in.)-110 ~ +110 deg-110 ~ +10 deg360 deg

ø500 mm (19.68 in.)500 x 500 mm (19.68 x 19.68 in.) 400 kg (880 lb.) *2

350 kg (770 lb.) *2

ø720 x H450 mm (ø28.34 x H17.71 in.) *3

ø630 x H450 mm (ø24.80 x H17.71 in.) *3

40 - 12,000 min-1 :Grease Lubrication

ø80 mm (ø3.14 in.)15/22 kW (30 HP)187 Nm / 1,120 min-1

50,000 mm/min (1968.5 ipm)25 / 50 min-1

JIS B 6339 Tool Shank 40TJIS B 6339 Pullstud 40P30 pcs (Chain-pot Type)96 mm (3.77 in.) *3

175 mm (6.88 in.)350 mm (13.71 in.) *3

10 kg (22 lb.)1.1 sec

68 kVA *4

AC 200/220V±10%0.54 ~ 0.93 MPa400 NL/min (158 gpm) *4

600 L (158 gal.)

±0.002 mm *5

±0.001 mm *5

5 / 5 sec.±2 / ±2 sec.

Movement and RangesX-axis TravelY-axis TravelZ-axis TravelA-axis TravelA-axis Travel *1

C-axis TravelTable (Pallet *1)Working SurfaceWorking Surface *1

Loading CapacityLoading Capacity *1

Max. Work Size

Max. Work Size *1

Spindle (BT40)Spindle Speed RangeSpindle Bearing Inner DiameterSpindle Motor Power (cont./short time)Max. Spindle TorqueFeedrateRapid Traverse and Feedrate :X/Y/ZRapid Traverse and Feedrate :A/CAutomatic Tool ChangerType of Tool ShankType of Retention KnobTool Storage CapacityMax. Tool Diameter when the pots on both sides are empty

Max. Tool LengthMax. Tool MassTool Changing Time :Tool to Tool

Power SourcesElectrical Power SupplyPower VoltageCompressed Air SupplyVolume of Compressed Air to be SuppliedTank CapacityCoolant TankAccuracyPositioning Accuracy (X/Y/Z)Repeatability (X/Y/Z)Pallet Indexing Accuracy (A/C)Pallet Indexing Repeatability (A/C)

( Only for Matsuura G-Tech 30i )

Spindle SpeedBT40 : 20,000 min-1 / 30,000 min-1

BT50 : 12,000 min-1 / 15,000 min-1

Coolant Thru Spindle System2MPa / 5MPa / 7 MPa (290 psi / 725 psi / 1,015 psi)

Number of ToolsBT40 : 40 / 80BT40 : 90 / 120 / 150 / 180 / 210 / 240BT50 : 60 / 120BT50 : 150 / 180 / 210 / 240

Pallet Changer PC2 / PC6 / PC17

Safety Features Door interlock for Total Splash

Work Clamping SystemScale Feedback SystemTail-StockThermal Displacement Compensation SystemTool Management and Workpiece Measurement

In-Process Measurement / Auto CenteringIn-Process Measurement / Tool Breakage Detection

Swarf ManagementSemi Dry UnitCoolant Flow CheckerLift-up Chip Conveyor (Hinge, Drum)Chip BucketChip Flush SystemAir Blow for Chip Swarf RemovalWorkpiece Cleaning Gun

Operation and Maintenance AssistanceAuto Grease Supply Unit (X/Y/Z)8 sets of extra M FunctionsWeekly Timer3 Color Status Light (Red, Green, Yellow)Spindle Run Hour MeterAutomatic Operation Run Hour Display UnitMist Separator UnitRotary Wiper (Air Supply System)Spindle Load Monitoring Function

Documents

Matsuura Mam72 63v