8805 Jones Rd. Ste 104, Houston Texas 77065 * 1-888-861-7351 * www.zuummedia.com ZM 110212

Model: VCP12V10A

____________________________________________________________________________________ 9 Channel CCTV Power Supply (9) 12VDC 1 Amp individually fused outputs Short Circuit protection Over-load protection AC power LED indicator Individual LED’s for each output Power ON/OFF switch Unit maintains camera synchronization 100% full load burn-in test Spare fuses included Power supply input voltage can be selected 110VAC or 220VAC. The AC voltage switch is located under the sub rack next to the fuse holder. Factory setting is 110VAC, do not change for normal U.S.A installations. Note: If there is no output after installation check main 3A/250V fuse located under sub rack. Connection Diagram: Each channel of power supply has a jumper switch. When there is a channel that needs maintenance or not being used, you can switch the line to the "OFF" status, and the other channels will not be affected. ____________________________________________________________________________________

8805 Jones Rd. Ste 104, Houston Texas 77065 * 1-888-861-7351 * www.zuummedia.com ZM 110212

Input Voltage AC90-264V Input Voltage Frequency 50/60Hz Output Specification Output Voltage 12 VDC+10% Total Output Current 10Amp Total Outputs (9) 12VDC, 1Amp individually fused outputs Fuse Type Glass Fuse Fuse Rating 1 Amp / 250VAC Protection

General Protection Each output has a individual fuse and LED indicator, when problem occurs, only the defective output is affected, the other outputs still operate

Short Circuit Protection When short condition occurs, individual fuse will open the circuit, to correct condition, replace with new fuse

Overload protection 105%-150% hiccup mode, auto-recovery Over-voltage protection 115%~135% General Specifications Working temperature and humidity 14˚~+140˚F Refer to output derating curve 20%~90%RH Store temperature and humidity -4˚~+185˚F, 10%~95%RH

Power Supply Box and Mounting Dimensions

Warning and Caution High Voltage: This installation should be made by a qualified service person and should conform to all local codes and in accordance with The National Electrical Code or the equivalent. This equipment has been tested and found to comply with the limits for a class A digital device. Any change or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

____________________________________________________________________________________

Do You Need Technical Support?

ZuumMedia is proud to offer free technical support to ensure your product is operating correctly. If you are experiencing difficulties setting up this product, please call us for assistance 1-888-861-7351 or visit www.zuummedia.com for

more information.

Here for You 24/7