Moeller Datasheet MCS4 019711

  • Upload
    mihai37

  • View
    223

  • Download
    0

Embed Size (px)

Citation preview

  • 8/12/2019 Moeller Datasheet MCS4 019711

    1/5

    Type:MCS4Article No.:019711Sales textMCS, 1POLE

    Variable switching differential

    Ordering information

    Contacts Number 1 changeover contact

    Description Variable switching differential

    Max. operating pressure bar 7

    Cutin pressure and cutout pressure: separate stepless adjustment. All the intersectionpoints within the diagram area can be set.

    1

  • 8/12/2019 Moeller Datasheet MCS4 019711

    2/5

    Cutin pressure and cutout pressure: separate stepless adjustment. All the intersectionpoints within the diagram area can be set.

    Min. switching differential: 0.15 bar

    Example:

    Cutout pressure 3.3 bar

    Cutin pressure 2.2 bar

    Notes concerning the product group

    Features:

    Pressure pipe flange R 1/4If required: pressure pipe flange R 1/2IP65 in conjunction with VM20 cable gland1 insulated earth terminal2 cable entry knockouts for M20Neoprene diaphragm

    2

  • 8/12/2019 Moeller Datasheet MCS4 019711

    3/5

    Cutin and cutout pressures are factorypreset as specified with type suffix: 203948

    R 1/4 corresponds to G 1/4

    R 1/2 corresponds to G 1/2 according to ISO 2281

    Auxilliary contacts to IEC/EN 609471

    MCS...G:

    Goldplated contacts, particularly suitable for switching low voltages and currents from 5 V AC/DC 1mA.

    General

    Standards IEC/EN 6094751

    Test pressure bar 32

    Rupturing pressure bar 90

    Operating frequency Operations/h 3000

    Climatic proofing

    Damp heat, constant, toIEC 60068278Damp heat, cyclic, to IEC60068230

    Ambient temperature C ... 25...+70

    Protection type IP 65

    Mounting position As required

    Mechanical shock resistance to IEC60068227

    Halfsinusoidalshock 20 ms

    g > 10

    Vibration resistance acc. to IEC/EN6006826

    Amplitude 1mm

    Hz 36

    Lifespan at 50 12% pressuredifferential

    Operations 106 1 2

    Terminal capacities

    Solid mm2 1 (0.75 2.5)

    Flexible with ferrules to DIN 46228 mm2 1 (0.5 1.5)

    Terminations Tunnel terminal

    Terminal screw M3

    Tightening torque of terminal screw Nm 0.5

    Contacts/switching capacity

    Rated impulse withstand voltage Uimp V AC 4000

    Rated insulation voltage Ui V 400

    Overvoltage category/pollutiondegree

    III/3

    Max. shortcircuit protective device

    Fuseless Type PKZ2/ZM6

    3

    http://gotobest%28%27203948%27%29/
  • 8/12/2019 Moeller Datasheet MCS4 019711

    4/5

    Fuse gG/gL A 10

    AC15

    Rated operational current

    230 V A 2

    DC13

    Rated operational current

    24 V A 2

    110 V A 0,5

    Rated frequency f Hz 50

    Notes

    Notes

    The following applies to the rated operational current for DC13:

    with 24 V: ...SOND910G: 0.25 Awith 110 V: ...SOND910G: 0.8 A

    Dimensions

    Moeller GmbH, HeinMoellerStr. 711, D53115 BonnEMail: [email protected], Internet: www.moeller.net, http://catalog.moeller.net

    4

  • 8/12/2019 Moeller Datasheet MCS4 019711

    5/5

    HPLC2007G V2.1 2007 by Moeller GmbH

    5