Upload
gazwang478
View
214
Download
0
Embed Size (px)
Citation preview
7/29/2019 msds-nsa-16
1/7
MATERIAL SAFETY DATA SHEETHMHAZARD RATINGS
Health
Flammability
Reactivity
PPE
1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Product Name V056260
MSDS Name NEVER-SEEZ REGULAR NSA-16 12.5OZ AERO
CAS Number Mixture
3 HAZARDS IDENTIFICATION
Emergency Overview
Product is a flammable aerosol. Pressurized container may explode when exposed to heat or flame. Contact may
cause skin and eye irritation. Mist may cause nose and throat irritation. Ingestion may cause nausea, vomiting,
pain, upset stomach, and diarrhea.
Generic Description Aerosol Lubricant
Manufacturer BOSTIK FINDLEY, INC.
211 Boston Street
Middleton , MA 01949 USA
24 Hour Emergency Assistance
Phone: 1-800-227-0332
General Assistance
Phone: 1-978-777-0100
MSDS Assistance
Phone: 1-978-777-0100
2 COMPOSITION / INFORMATION ON INGREDIENTS
CAS Number PercentageComponent
142-82-5 10 - 30Heptane
110-54-3 10 - 30Hexane
106-97-8 5 - 10Butane
74-98-6 5 - 10Propane
7440-50-8 1 - 5Copper Powder
1314-13-2 0.5 - 1.5Zinc Oxide
7429-90-5 0.5 - 1.5Aluminum Powder
Proprietary BalanceNon-hazardous and other ingredients below reportable
levels
1 / 7
MSDS Number 15253 Product V056260
ND = Not DeterminedNA = Not Available15253Label Number
7/29/2019 msds-nsa-16
2/7
POTENTIAL HEALTH EFFECTS
INGESTION: This product is harmful if swallowed. Ingestion can cause gastrointestinal irritation, nausea, vomiting
and diarrhea.
EYE CONTACT: Liquid or vapors may irritate the eyes. Symptoms may include stinging, tearing, redness,
swelling, and blurred vision. Eye contact may lead to permanent damage if not treated promptly.
INHALATION: This product may cause irritation to the respiratory system. Excessive inhalation of this material
causes headache, dizziness, nausea and incoordination. Possibly unconsciousness and asphyxiation.
SKIN CONTACT: This product may cause irritation to the skin. Prolonged or repeated contact with this product
may dry and/or defat the skin. This product may be harmful if it is absorbed through the skin.
Target Organs
Central Nervous System. Lungs. Skin. Eyes.
4 FIRST AID MEASURES
Skin
For skin contact, wash immediately with soap and water. If irritation persists, get medical attention.
Eye
Immediately flush with plenty of water for at least 15 minutes, holding eyelids open at all times. Get medicalattention immediately.
Inhalation
Move person to non-contaminated air. If the affected person is not breathing, apply artificial respiration. Call a
physician if symptoms develop or persist.
Ingestion
If the material is swallowed, get immediate medical attention or advice -- Do not induce vomiting. If vomiting occurs
naturally, have victim lean forward to reduce risk of aspiration. If person is conscious and can swallow,
immediately give two glasses of water, but do not induce vomiting. Material is corrosive. If vomiting occurs, give
fluids again. Seek immediate medical attention. Do not give anything by month to an unconscious or convulsingperson.
Notes To Physician
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
If overexposure to the solvents in this product is suspected, testing should include nervous system and brain
effects including recent memory, mood, concentration, headaches and altered sleep patterns. Liver and kidney
function should be evaluated.
5 FIRE FIGHTING MEASURES
Extinguishing Media
Use dry chemical, carbon dioxide, or foam. Use water to cool fire-exposed containers and to protect personnel. Do
not direct a solid stream of water or foam into hot, burning pools; this may result in frothing and increase fire
intensity.
2 / 7
MSDS Number 15253 Product V056260
ND = Not DeterminedNA = Not Available15253Label Number
7/29/2019 msds-nsa-16
3/7
Basic Fire Fighting Procedures
DANGEROUS when exposed to heat or flame. This material can be ignited by flame or spark under all normal
atmospheric conditions. Vapors are heavier than air and may travel along the ground to some distant source of
ignition and flash back. Pressurized Container: May explode when exposed to heat or flame. Empty containers
may retain product residue including Flammable or Explosive vapors. Do not cut, drill, grind, or weld near full,
partially full, or empty product containers.
Dust Explosion Hazard
None Known
Sensitivity To Mechanical Impact
Container could potentially burst or be punctured upon mechanical impact, releasing flammable vapors.
Sensitivity To Static Discharge
Sparks generated by static discharge may ignite this product or its vapors. All containers and equipment must be
bonded or grounded to minimize risk.
Unusual Fire & Explosion Hazards
During a fire, irritating and highly toxic gases may be generated during combustion or decomposition. High
temperatures can cause sealed containers to rupture due to a buildup of internal pressures. Cool with water.
Fire Fighting Equipment/Instructions
Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing
apparatus, protective clothing and face mask.
Flash Point -156 F (-104 C)
6 ACCIDENTAL RELEASE MEASURES
Emergency Action
Evacuate the area promptly and keep upwind of the spilled material. Isolate the spill area to prevent people from
entering. Keep upwind of the spilled material and isolate exposure. Wear appropriate protective equipment andclothing during clean-up.
Containment
Stop discharge if safe to do so. Stop material from contaminating soil or from entering sewers or water streams.
Cover spills with non-flammable absorbent and place in closed chemical waste containers.
7 HANDLING & STORAGE
For Commercial Use Only - Not Packaged or Labeled for Home Use!
Handling
Keep this product from heat, sparks, or open flame. Avoid getting this material into contact with your skin andeyes. Avoid breathing mists or aerosols of this product. Use this product with adequate ventilation. Do not reuse
the empty container.
Storage
Store in a cool, dry, well-ventilated area. Do not handle or store near an open flame, heat or other sources of
ignition. Keep out of direct sunlight. Do not store above 120 F (49 C).
3 / 7
MSDS Number 15253 Product V056260
ND = Not DeterminedNA = Not Available15253Label Number
7/29/2019 msds-nsa-16
4/7
Empty Container Precaution
Attention! Follow label warnings even after container is emptied since empty containers may retain product
residues. Do not reuse empty container without professional cleaning for food, clothing, or products for human or
animal consumption, or where skin contact can occur.
Engineering Controls
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists
generated from the handling of this product. Additional area ventilation or local exhaust may be required to
maintain air concentrations below recommended exposure limits. Explosion proof exhaust ventilation should be
used.
EXPOSURE CONTROLS / PERSONAL PROTECTION8
Eye Protection
Wear goggles or safety glasses with side shields.
Skin And Body Protection
Impervious gloves should be used at all times when handling this product. Recommended gloves include rubber,
neoprene, nitrile or viton. Use of protective coveralls and long sleeves is recommended.
Respiratory Protection
Avoid breathing vapor and/or mists. If airborne concentrations are above the applicable exposure limits, use
NIOSH approved respiratory protection. High airborne concentrations may necessitate the use of self-contained
breathing apparatus (SCBA) or a supplied air respirator.
General
Eyewash fountains and emergency showers should be readily available. Use good industrial hygiene practices in
handling this material.
Exposure Limits
ACGIH - Occupational Exposure Limits - TWAs
ALUMINIUM POWDER(PYROPHORIC)
7429-90-5 10 mg/m3 TWA (metal dust)
BUTANE (CONTAINING >= 0.1%
BUTADIENE (203-450-8))
106-97-8 800 ppm TWA
COPPER 7440-50-8 0.2 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and mists,
as Cu)
HEPTANE (N-) 142-82-5 400 ppm TWA
HEXANE 110-54-3 50 ppm TWA
PROPANE 74-98-6 2500 ppm TWA
ZINC OXIDE 1314-13-2 5 mg/m3 TWA (fume); 10 mg/m3 TWA (dust)
OSHA - Vacated PELs - Time Weighted Averages
ALUMINIUM POWDER(PYROPHORIC) 7429-90-5 15 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirablefraction)
BUTANE (CONTAINING >= 0.1%
BUTADIENE (203-450-8))
106-97-8 800 ppm TWA; 1900 mg/m3 TWA
COPPER 7440-50-8 0.1 mg/m3 TWA (fume, dusts, mists as Cu)
HEPTANE (N-) 142-82-5 400 ppm TWA; 1600 mg/m3 TWA
HEXANE 110-54-3 50 ppm TWA; 180 mg/m3 TWA
PROPANE 74-98-6 1000 ppm TWA; 1800 mg/m3 TWA
ZINC OXIDE 1314-13-2 5 mg/m3 TWA (fume); 10 mg/m3 TWA (total dust); 5
mg/m3 TWA (respirable fraction)
4 / 7
MSDS Number 15253 Product V056260
ND = Not DeterminedNA = Not Available15253Label Number
7/29/2019 msds-nsa-16
5/7
9 PHYSICAL & CHEMICAL PROPERTIES
Percent Volatile 40 %
Solubility In Water 0 %
Target Solids 60 %
pH N/A
Density 1.19 g/cc
Odor Threshold N/A
Octanol/Water Coefficient N/A
Solvent
Aerosol
No
Odor
Physical State
Freeze Protect
10 STABILITY & REACTIVITY
Stability/Incompatability
Stable under normal conditions.
Hazardous Reactions/Decomposition Products
Upon decomposition of this product, the following oxides will be produced: Carbon dioxide, carbon monoxide,
oxides of sulfur and nitrogen.
Hazardous Polymerization
Will not occur.
Conditions To Avoid
Keep away from sources of ignition. Avoid contact with Strong Oxidizers, Reducers, Acids and Alkalis.
TOXICOLOGICAL INFORMATION11
Ld50
NIOSH - Selected LD50s and LC50s
BUTANE (CONTAINING >= 0.1%
BUTADIENE (203-450-8))
106-97-8 Inhalation LC50 Rat: 658 gm/m3/4H; Inhalation LC50
Mouse: 680 gm/m3/2H
HEPTANE (N-) 142-82-5 Inhalation LC50 Rat: 103 gm/m3/4H
HEXANE 110-54-3 Inhalation LC50 Rat: 48000 ppm/4H; Oral LD50 Rat: 28710
mg/kg
ZINC OXIDE 1314-13-2 Inhalation LC50 Mouse: 2500 mg/m3; Oral LD50 Mouse:
7950 mg/kg
ECOLOGICAL INFORMATION12
VOC (Volatile Organic Compounds) 473 g/l
Ecotoxicological Information
Organic solvents produce slight to moderate toxicity to aquatic life. Insufficient data exists to evaluate the effect on
plants, birds or land animals.
5 / 7
MSDS Number 15253 Product V056260
ND = Not DeterminedNA = Not Available15253Label Number
7/29/2019 msds-nsa-16
6/7
We make no guarantee or warranty of any kind that the use or disposal of this product complies with all local,
state, or federal laws. It is also the obligation of each user of the product mentioned herein to determine and
comply with the requirements of all applicable statutes.
DISPOSAL CONSIDERATIONS13
Waste Disposal
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations. Wastes
must be tested using methods described in 40 CFR Part 261 to determine if it meets applicable definitions of
hazardous wastes.
14 TRANSPORT INFORMATION
Comments
This product is regulated under ICAO for International Air Transport and IMDG for Ocean Transport as an Aerosol,
Class 2.1, UN1950.
Proper Shipping Name Consumer Commodity
UN/NA Code ORM-D
This MSDS is prepared and distributed pursuant to the Federal Hazard Communication Standard, 29 CFR1910.1200.
REGULATORY INFORMATION15
Federal Regulations
All components are on the U.S. EPA TSCA Inventory List.
CERCLA/SARA - Hazardous Substances and their Reportable Quantities
COPPER 7440-50-8 5000 lb final RQ (no reporting of releases of this hazardous
substance is required if the diameter of the pieces of the
solid metal released is equal to or exceeds 0.004 inches);
2270 kg final RQ (no reporting of releases of this hazardous
substance is required if the diameter of the pieces of the
solid metal released is equal to or exceeds 0.004 inches)HEXANE 110-54-3 5000 lb final RQ; 2270 kg final RQ
ZINC OXIDE 1314-13-2 statutory RQ = 1 pound (0.454 kg)
Based on an evaluation of the components used, this product does contain hazardous ingredients
identified as per 29 CFR 1910.1200.
State Regulations
If this product contains any ingredients listed under California Proposition 65, they will be noted below:
International Regulations
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and
contains all the information required by the Controlled Products Regulations.
This is a "controlled product" under the Canadian Workplace Hazardous Materials Information System (WHMIS).
Class D Division 2 Sub-division B. and Class B Division 5.
SARA 302 EXTREMELY HAZARDOUS SUBSTANCES
Not Regulated
6 / 7
MSDS Number 15253 Product V056260
ND = Not DeterminedNA = Not Available15253Label Number
7/29/2019 msds-nsa-16
7/7
16 OTHER INFORMATION
Disclaimer
The data in this MSDS has been compiled from publicly available sources. This data relates only to the
designated product and not to the use of said product in combination with other materials. All materials may
present unknown hazards and should be used with caution. Although certain hazards are described herein, we
cannot guarantee that these are the only hazards which exist. Responsibility for proper precautions and safe useof the product lies with the user. All data in this MSDS is typical of the product as a whole, and does not
represent any individual lot or batch, therefore, Bostik Findley, Inc. makes no warranty about the accuracy of the
data herein and assumes no liability for the use of such data. It is the responsibility of the user to comply with all
applicable federal, state, and local laws and regulations.
SARA 311/312 HAZARD CATEGORIES
Immediate Hazard
Delayed Hazard
Fire Hazard
Pressure Hazard
Reactivity Hazard
Yes
No
Yes
Yes
No
SARA 313 TOXIC CHEMICALS
CAS Number PercentageComponent
110-54-3 10 - 30Hexane
7440-50-8 1 - 5Copper Powder
1314-13-2 0.5 - 1.5Zinc Oxide
7429-90-5 0.5 - 1.5Aluminum Powder
Supercedes 23-Aug-2002
Richard Sontag
Issue Date
Prepared By
11-Dec-2002
MSDS Sections Reviewed and/or Updated
Composition / Information on Ingredients: Ingredients
Fire Fighting Measures: Fire Fighting Measures: Fire & Explosion Properties
Physical & Chemical Properties: Physical & Chemical PropertiesRegulatory Information: Regulatory Ratings
7 / 7
MSDS Number 15253 Product V056260
ND = Not DeterminedNA = Not Available15253Label Number