8/8/2019 MSL-450_engl
2/2
TechnicalData CONTUR MSL-450/450 L
Specifications subject to change without prior notice.
SAEILO Deutschland GmbHWerkzeugmaschinen
Hauptstrae 68, D-35585 WetzlarTel.: 0049 (6446) 9247-0, Fax:
0049 (6446) 9247-33eMail: [email protected]
Internet: www.saeilo.de
Representative:
Konzept&Design:
mark-upMarketingDesignGmbH
Because of the heavy and rigid body with Meehanitecast iron you
will get perfect results in turning - evenunder strong
conditions.
45 inclined bed
Strong AC-main spindle motor with 16,5 kW (optional 25 kW)
Dialogprogrammierung ShopTurn / Manual Guide (optional)
AC feed motors
Disk turret with 10 (12) tool stations (Option: VDI)
Heavy, rigid body with Meehanite cast iron for high torsional
stiffness
Robust flat guides (optional: linear guides)
Ergonomical rotatable control panel
Compact, modern design
Standard equipment:
CNC-Control SIEMENS 802 D
disk turret with 10 tool stations
hydraulic type 3-jaw chuck
hydraulic tailstock
mobile electronical hand wheel
complete cooling equipment
central lubrication
working light
safety equipment according to CE
Optional accessories:
CNC-Control SIEMENS 810 D / 840 D
CNC-Control FANUC 0i-T / 21i-T
VDI disk turret with 10 tool stations
VDI disk turret with 12 tool stations
driven tools with C-Axis
chip conveyor
bar loader
part retriever
tool setter
Further optional accessories on request.
Operating- Swing over bed (diameter) 700 mmrange Max. turning
diameter 400 mm
Swing over slide (diameter) 530 mmMax. turning length 450/450 L
600/1000 mm
Main spindle Spindle nose DIN 55026 2-8Spindle speed 100-3500
rpmSpindle bore 90 mmBar capacity 77 mmChuck diameter 250 (Opt.
300) mm
Tooling Typ disk-turretNumber of tools 10 (Option 12)Tooling
Option DIN 69880 VDI 40
Rapid Feed X-/Z-Axis with flat guides 20/20 m/min X-/Z-Axis with
linear guides ? 24/24 m/min
Travel X-Axis 250 mm Z-Axis 450 / 450 L 670 / 1070 mm
Tailstock Quill diameter 90 mm(Option) Quill travel 100 mm
Taper hole ofQuill MK-5
Drives Spindle motor (40 % ED) SIEMENS 16,5 (Opt. 25)
kWSpindlemotor (50 % ED) FANUC 18 (Opt. 26) kW X-Axis Servomotor 3
kW Z-Axis Servomotor 3 kW
Precision Positioning accuracy 0,005 mmRepeat accuracy 0,003
mm
Dimensions Length 450/450 L ca. 2780/3180 mm Width ca. 1550
mmHeight ca. 1800 mm Weight 450/450 L ca. 4900/6000 kg
450/450 L
