OMV Exploration & Production

Move & More.

MWD/LWD and Well Logging Data for Geomechanical Model Building

11. FKPE Workshop- Bohrlochgeophysik und Gesteinsphysik in Hannover am 06.-07.10.2011Michael J. Blum senior petrophysicist

OMV E&P PE-Formation Evaluation

2 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Objectives

� The Geomechanical Model� Building a Geomechanical Model : Generic Workflow

� Using Core information� Formation Strength Evaluation� Overburden Gradient Calculation� Pore Pressure Prediction� Stress Orientation� Maximum Horizontal Stress Magnitude

� Conclusions

3 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

The Geomechanical Model

4 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Building a Geomechanical Model (GEM): Generic Workflow

5 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Using Core tests

6 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Using Core Photos and LWD images

7 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Formation strength evaluation : Pros and Cons

8 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Dynamic Elastic Constants

9 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Calculation of Overburden Gradient

10 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Pore pressure prediction: Normal compaction trends

11 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Pore pressure prediction: Wireline/MWD response to overpressure

12 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Pore Pressure Prediction : Example

13 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Stress Orientation: Near Wellbore Stresses

14 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Maximum Horizontal Stress Magnitude : Input data instead of image log

15 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Maximum Horizontal Stress Magnitude : Sonic Scanner

16 |OMV Exploration & Production, PE-FE, Michael Blum, Oktober 2011

Conclusions

� Petrophysical logs are valuable for geomechanical modeling� Logs are required for evaluation of formation strength, pore

pressure,stress direction, and maximum horizontal stress magnitude� Most important LWD or Wireline Logs for Geomechanics include GR,

density, sonic, resistivity, caliper and borehole image logs, withoutthem it is not possible to establish a reasonable Geomechanicalmodel

� High quality log data results are essential for a high accuracygeomechanical model