NI Product Announcement Alliance Day 2013

Fanie Coetzer FSE-Gauteng, Limpopo, Mpumalanga,

North-West

NI USB-8542 I²C/SPI interface

– For rapid prototyping and interfacing to devices that use the I2C (Inter-Integrated Circuit) and SPI (Serial Peripheral Interface) buses.

– Design- avoid low level design and programming

– Production Test- Integrate with larger test systems

– OEM Evaluation for I2C & SPI device manufacturers

NI USB-8542 I²C/SPI interface

• Specifications

Product Voltage Levels

Max SPI Rate

SPI Streaming

SPI Transfer

Size

Max I2C Rate (Standard, Fast,

Fast Plus)

Max I2C Rate (High-Speed)

I2C Pullup Resistors

DIO Driver Type

USB-8452

3.3V, 2.5V, 1.8V, 1.5V,

1.2V

50MHz Supported 8-64 bits 1MHz 3.33 MHz (High Speed Mode)

Onboard Push-Pull or Open Drain

USB-8451 5V, 3.3V 12MHz None 8 bits - fixed

250 kHz (Fast Mode)

Not Supported Requires External

Push-Pull or Open Drain

HAZLOC Certification

The following chassis have been certified for use in hazardous locations –

NI cDAQ-9181 1-Slot Ethernet Chassis

NI cDAQ-9191 1-Slot Ethernet/Wi-Fi Chassis

NI cDAQ-9184 4-Slot Ethernet Chassis

NI cDAQ-9188 8-Slot Ethernet Chassis

NI cDAQ-9138 Stand-Alone Chassis

NI cDAQ-9139 Stand-Alone Chassis

Providing ALL guidelines are followed.

BNC and Mass Term for USB X-Series

• 3 new USB Mass Term

– 1MS/s to 2MS/s/ch

• 6 new USB BNC

– 500ks/s to 2MS/s/ch

Price Decrease: Stand-Alone NI cDAQ

• cDAQ-9138 1,06GHz Celeron

– Win7 R48950 30%

– RT R53990 23%

• cDAQ-9139 1.33GHZ Core i7

– Win7 R64790 20%

– RT R70190 13%

Stand-Alone NI cDAQ

• Stand-Alone CompactDAQ VS CompactRIO

Stand-Alone NI cDAQ

• High-performance embedded monitoring and logging applications where critical control is not needed

Stand-Alone NI cDAQ

Stand-Alone NI cDAQ NI CompactRIO

Control Low Speed (500Hz loop rate)

High Speed (40MHz loop rates)

Supported Software LabVIEW, LabVIEW Real-Time, Measurement Studio, CVI, Visual C++, Visual Basic

LabVIEW, LabVIEW Real-Time, LabVIEW FPGA

Driver Software NI-DAQmx, NI-XNET NI-RIO

Operational temperature 0 to 55 °C Up to -40 to 70 °C

Storage 32 GB nonvolatile solid state drive

32 GB nonvolatile solid state drive

Third-party modules No Yes

NI 9146: 4-Slot Ethernet RIO

• Lower cost, smaller form factor

• Scan Mode Accessable

• FPGA Accessable

Price change: 4-slot USB DAQ

• NI cDAQ-9174 and NI cDAQ-9184

• Improve the adoption of 8-slot NI CompactDAQ

MXI-Express RIO Chassis

• LX50 (NI 9154) and LX85 (NI 9155)

• Daisy chain from NI CompactRIO, PXI controllers, industrial or desktop PCs, and laptops

Controller Interface

CompactRIO Multicore CompactRIO – 9081, 9082

(MXI-Express interface is built in)

PXI

PXI-Express-8364

PXI-8364

ExpressCard-8360

Industrial Controller 31xx Series Industrial Controller

(MXI-Express interface is built in)

PC

ExpressCard-8360 (Laptop)

PCIe-8361

PCIe-8362

Comparison to Other Expansion I/O Products

MXI-Express RIO

Use the high-performance

expansion chassis for high-channel-

count applications.

Ethernet RIO

Add FPGA-enabled I/O to

anywhere on your Ethernet

network.

EtherCAT RIO

Use deterministic I/O

over EtherCAT for

distributed applications.

WSN

Easily monitor your assets

with reliable, battery-

powered measurement

nodes.

I/O Count 8 or 14 C Series slots 4 or 8 C Series slots 8 C Series slots 36 Nodes/Gateway

FPGA Virtex-5 (LX50/LX85/LX110) Spartan 2M/Spartan 6

(LX45)

Spartan 2M N/A

Network Topology Daisy Chain/Star Same as Ethernet Daisy Chain/Star Star/ Mesh

Distance 7 m between chassis 100 m before hub 100 m before repeater Up to 300 m single hop

range

Multidevice

Synchronization

FPGA-based DIO FPGA-based DIO Implicit in bus Shared network time base

Communication Jitter <10 μs No Spec <1 μs No Spec

Bus Throughput 250 MB/s 12.5 MB/s 12.5 MB/s 250 kb/s

API Support FPGA Host Interface FPGA Host

Interface/RSI

RSI RSI

Host Windows/Real-Time Windows/Real-Time Real-Time Only Windows/Real-Time

Comparison to Other Expansion I/O Products

NI 9467 GPS Time Synchronization Module

• Timestamp FPGA data with ±100nS accuracy with NI FPGA Timekeeper.

• Applications include

– Structural Health Monitoring

– Synchronized phasor measurements – Synchrophasors

– Not designed for mobile applications

NI 9469 Syncronization Module

• Route Clocks and triggers

• NI-RIO

– DSA to DSA Syncronization

– SAR/Digital to SAR/Digital Syncronization

– DSA to SAR/Digital

• NI-DAQmx

– Syncronize all module types.

• Topologies: Tree, Star, Daisy, Hybrid

NI 9381 Multifunction Input/Output

• First ever Multifunction C-Series module

• 8Ch 0-5V Analog Input

• 8Ch 0-5V Analog Output

• 4 DIO TTL @ 1MHz

C Series RMC for sbRIO

• Take advantage of over 70 C Series modules

• sbRIO-9605/9606/9623/9626

NI Direct Injector (DI) Driver Systems

• Formerly known as Drivven

• Engine control and analysis

• Commissionable • 175V @30A

WSN-3214 STRAIN/BRIDGE COMPLETION

• Ideal for wireless structural health monitoring applications

• 4 Channel @ 1kS/s

• Quarter-/half-/full-bridge completion, strain gauge.

New USRP’s

• NI USRP-2922 (400 MHz – 4.4 GHz)

• NI USRP-2930 (50 MHz – 2.2 GHz) with GPS-Disciplined Clock

• NI USRP-2932 (400 MHz – 4.4 GHz) with GPS-Disciplined Clock

PXI(e)-8820 Low-Cost Embedded Controller

PXI(e)-8820

Processor Intel Celeron 1020E

Clock Speed 2.2 GHz

CPU Cores Two

PCI Express Link Configuration Four x1 (Gen 1) for PXI Express

Maximum System Bandwidth 1 GB/s

Maximum Slot Bandwidth 250 MB/s for PXI Express, 132 MB/s for PXI

RAM (Std) 2 GB

RAM (Max) 8 GB

Hard-drive (Standard) 250 GB SATA

Slot Requirements 2

USB Ports 4

Serial Port, Parallel Port

Gigabit Ethernet Port

Video Connector Display Port

Hard Drive Based Recovery

Support for NI Real-Time Hypervisor No

OS Windows 7 32-bit, 64-bit,

LabVIEW Real-Time

NI PXI-8119 - Intel Core i7 Quad-Core PXIe Embedded Controller

NI PXI-8119 Processor Intel Core i7-3610QE Clock Speed 2.3 GHz (base), 3.3 GHz (single-core Turbo mode) CPU Cores 4 RAM (Standard) 4 GB RAM (Maximum) 8 GB Type of RAM 1600 MHz DDR3 Hard Drive (Standard) 250 GB SATA (or greater), 7200 RPM Hard Drive (Extended Temp) 80 GB SATA (or greater), 5400 RPM Solid State Drive (Extended Temp)

32 GB SLC, 250 GB MLC

Slot Requirements 4 USB Ports 6 (USB 2.0) Gigabit Ethernet Ports 2 Serial Port Yes Parallel Port Yes GPIB Port Yes ExpressCard Slot Yes Video Connector 2 x Display Port

(Kit comes with one Display Port to VGA Adapter)

Support for Dual Discrete Video Output

Yes (2 Ports Available)

In-ROM Diagnostics Yes Hard-Drive-Based Recovery Yes OS Options Windows 7 Professional (32-bit and 64-bit),

Windows XP Professional for Embedded Systems, LabVIEW Real-Time 2012 or later

0 100,000 200,000 300,000 400,000

PXI-8108

PXI-8110

PXI-8119

Parallel Benchmark: 1k FFT/s

PXIe-1491 HDMI & MHL Analyzer

• Analyze audio, video, and protocol for HDMI and MHL devices.

Competitive Analysis

120 W Programmable Power Supplies

• 2 independent 60 W DC PSU channels – PXIe-4112: 60V 1A/ch

– PXIe-4113: 10V 6A/ch

Built-in voltage and current readback up to 5 kS/s

4-wire remote sense – more accurate power

Combine channels for higher output.

Higher Current SMU’s

• Industry’s Highest Channel Density SMUs: – PXIe-4144 and PXIe4145(SourceAdapt™ )

• Four SMU channels per single PXIe slot

• ± 6V at ± 500mA output with 4-quadrant operation

• sampling rates of up to 600 kS/s

• PXIe-4145 features SourceAdapt™ technology: customized response for any load – for faster more stable measurements

• 15 pA current measurement sensitivity on PXIe-4145

• hardware sequencing engine for triggering and synchronization

2 A General Purpose PXI Switches

• Addtional Features

– Triggering

– Relay Count Tracking

NI PXI-2520

80-Channel 2A SPST Relay Module

NI PXI-2521

40-Channel 2A DPST Relay Module

NI PXI-2522

53-Channel 2A SPDT Relay Module

NI PXI-2523

26-Channel 2A DPDT Relay Module

Digitizer/Oscilloscope

• PXIe-5160

• ... Attractiveprice/performance

point for applications in 1 to 2GS/s speed range.

• Up to 68 channels in 18-slot

• Supports P2P streaming

Specification NI PXIe-5160 Variant Good Better Best Form Factor PXIe (x4) ADC Resolution 10-bit Onboard Memory 64 MB 2 GB 2 GB Number of Channels 2 2 4 Sample Rate (4 Channel) N/A N/A 1.25 GS/s Sample Rate (2 Channel) 2.5 GS/s Sample Rate (1 Channel) 2.5 GS/s Input Impedance 50 Ohm / 1 MOhm Real-time Bandwidth (50

Ohm) 500 MHz

Real-time Bandwidth (1 MOhm)

300 MHz

Input Ranges (50 Ohm) 50, 100, 200, 500 mV

1, 2, 5 V

Input Ranges (1 MOhm) 50, 100, 200, 500 mV 1, 2, 5, 10, 20, 50 V

Coupling AC/DC Selectable Filters 20 MHz, 175 MHz

Digitizer/Oscilloscope

• PXIe-5162

• Att Meets/ Exceeds Agilent M9210A

•

•

Competitive Comparison

High Bandwidth RF FlexRIO Adapter Modules

• NI 5792 Receiver Adapter Module

– Widest bandwidth currently provided by NI

• NI 5793 Transmitter Adapter Module

Key Features RF Performance

Frequency Range 200 MHz-4.4 GHz Dynamic Range > 106dB at 2.4 GHz

Instantaneous Bandwidth 200 MHz-4.4 GHz Noise Figure < 6dB at 2 GHz

RF Architecture Direct Down-conversion RX IP3 -6dBm at 2 GHz

Receive Channel 14-bit, 250 MS/s (I and Q) Phase Noise

<- 95dBc/Hz 10 KHz offset at 2.4 GHz

Digital Lines 12 DIO Lines

Key Features RF Performance

Frequency Range 200 MHz-4.4 GHz Dynamic Range > 106dB at 2.4 GHz

Instantaneous Bandwidth 200 MHz-4.4 GHz Output Power Noise floor to +8 dBm

RF Architecture Direct Up-conversion Output Noise Density -138 dBm/Hz

Transmit Channel 14-bit, 250 MS/s (Iand Q) TX IP3 +17 dBm at 2 GHz

Digital Lines 12 DIO Lines Phase Noise

<- 95dBc/Hz 10 KHz offset at 2.4 GHz

NI 5782: NI’s Greatest IF Transceiver

• NI’s widest bandwidth IF transceiver to date

– Application Areas:

• RF modulation and demodulation, channel emulation, bit error rate testing (BERT), signal intelligence, radio frequency identification (RFID) and near-field communication (NFC) test, real-time spectrum analysis, and software-defined radio (SDR).

NI PXIe-5667: Best-in-Class Receiver

• Over the Air Spectrum Monitoring & Signal Surveillance

• 20 Hz to 3.6 GHz / 7 GHz

• Instantaneous bandwidth options of 25 and 50 MHz

The World’s Second VST

• The PXIe-5645R 6 GHz RF VST

with Baseband I/Q Interface.

Software

Data Dashboard

• Remotely monitor and control running LabVIEW applications

Multisim 12.0.1

• 975+ new components from ON Semiconductor

• 200+ new components from Analog Devices

• 525 new Infineon MOSFETS

• Easier custom design for NI M-Series DAQ and GPIB

• Over 50 new industry standard connectors including RCA, HDMI, DVI, and JTAG headers

NI LabVIEW Biomedical Toolkit

• Workbench

– View, Record, Playback

– Convert Industry Standard Data – LabVIEW

– Construct 3D images from 2D pictures.

• LabVIEW API

NI LabVIEW FPGA IP Builder

• Create or Port High-Performance algorithms

• Reuse algorithmic Vis in multiple applications with varying requirements – Helps high-performance RIO (FlexRIO, R-Series, VST)

customers by lowering the effort required to create high-throughput or low-latency FPGA IP

– The tool helps embedded customers (cRIO or sbRIO) by providing more explicit control over resource utilization

Vision Development Module and Vision Builder AI

• Vision Development module

– Binocular Stereo Vision Support

• Navigation, robotics, automated inspection and surveillance

– Data Matrix grading standards

• standards ISO 15515:2004 (printed codes) and AIM DPM-1-2006 (direct part markings)

– Vision Assistant Parallel code generation

Questions?