Upload
renebb
View
216
Download
0
Embed Size (px)
Citation preview
7/22/2019 Norlube 3030 MSDS
1/5
Norlube 3030 Page 1 of 5 Issue date: December 5, 2012
MATERIAL SAFETY DATA SHEET
1. Product and Company Identification
Product Name Norlube 3030
CAS # Mixture
Product Use Release agentManufacturer American Die Cast Releasants, LLC
2040 West Thompson Road
Fenton, MI. 48430
Phone 810-714-1964
Emergency Phone: 1-800-424-9300 (CHEMTREC)
2. Hazards Identification
Emergency overview
Potential short term health effects
Routes of exposure Eye, Skin contact, Inhalation, Ingestion.
Eyes May cause irritation.
Skin Frequent or prolonged contact may irritate and cause dermatitis.
Skin contact may aggravate an existing dermatitis condition.
Inhalation High vapor/aerosol concentrations (attainable at elevated temperatures well above ambient)
are irritating to the eyes and respiratory tract, and may cause headaches, dizziness,
anesthesia, drowsiness, unconsciousness, and other central nervous systems effects,
including death.
Ingestion Small amounts of this product aspirated into the respiratory system during ingestion or
vomiting may cause mild to severe pulmonary injury, possibly progressing to death.
Minimal toxicity.
Chronic effects At very high oral doses, this product caused reversible damage to the stomach, liver, and
kidney (male only) of rats. These effects are not relevant to humans at occupational levels
of exposure.
Signs and symptoms Symptoms may include redness, edema, drying, defatting and cracking of the skin.
Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.
3. Composition / Information on Ingredients
Ingredient(s) CAS # Percent
No hazardous ingredients at reportable levels.
4. First Aid Measures
First aid procedures
Eye contact Flush with cool water. Remove contact lenses, if applicable, and continue flushing.
Obtain medical attention if irritation persists.
Skin contact Flush with cool water. Wash with soap and water. Obtain medical attention if irritation
persists.
Inhalation Using proper respiratory protection, immediately remove the affected victim from exposure
Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt
medical attention.
Ingestion Do not induce vomiting. Keep at rest. Call for prompt medical attention.
7/22/2019 Norlube 3030 MSDS
2/5
Norlube 3030 Page 2 of 5 Issue date: December 5, 2012
5. Fire Fighting Measures
Flammable properties Static discharge, material can accumulate static charges which can cause an incendiary
electrical discharge.
Suitable extinguishing media Dry chemical, CO2, water spray or alcohol resistant foam.
Protection of firefighters
Specific hazards arising from Smoke from fire may contain silicon dioxide, formaldehyde, and hydrocarbon
The chemical decomposition products; protect humans from breathing combustion products. This liquid is
volatile and gives off invisible vapors. Ether the liquid or vapors may settle in low areas or
travel some distance along the ground to surface to ignition sources where they may ignite
or explode.
Protective equipment for Firefighters should wear full protective clothing including self contained breathing
Firefighters apparatus.
6. Accidental Release Measures
Personal precautions Keep unnecessary personnel away. Do not touch or walk through spilled material. Do not
touch damaged containers of spilled material unless wearing appropriate protective
clothing. Keep people away from and upwind of spill/leak.
Methods for containment Eliminate sources of ignition. Stop leak if you can do so without risk. Prevent entry into
waterways, sewers, basements or confined areas.
Water Spill Eliminate sources of ignition. Warn occupants and shipping in surrounding and downwind
areas of fire and explosion hazard and request all to stay clear. Remove from surface of
water by skimming or with suitable adsorbents. If allowed by local authorities and
environmental agencies, sinking and/or suitable dispersants may be used in non-confined
waters. Consult and expert on disposal of recovered material and ensure conformity to local
disposal regulations
Methods for cleaning up Before attempting clean up refer to hazard data given above. Small spills may be absorbed
with non-reactive absorbent and placed in suitable, covered, labeled containers. Prevent
large spills from entering sewers of waterways. Contact emergency services and supplierfor advice. Never return spills in original containers for reuse.
7. Handling and Storage
Electrostatic Accumulation Use proper bonding and /or grounding procedure. Additional information regarding safe
Hazard handling of products with static accumulation potential can be ordered by contacting the
American Petroleum Institute.
Handling Keep container closed. Handle open container with care. Wash hands after handling and
before eating. Use good industrial hygiene practices in handling this material. Do not get
this material in your eyes, on your skin, or on your clothing.
Storage Keep out of the reach of children. Store in a closed container away from incompatible
materials in a cool, well ventilated area.
Empty containers retain product residue (liquid or vapor) and can be dangerous. Do Notpressurize, cut weld braze solder, drill, grind or expose containers to heat, flame, sparks,
static electricity, or other sources of ignition; THEY MAY EXPLODE AND CAUSE
INJURY OF DEATH. Empty drums should be completely drained, properly bunged and
promptly returned to a drum reconditioner, or properly disposed of.
8. Exposure Controls / Personal Protection
7/22/2019 Norlube 3030 MSDS
3/5
Norlube 3030 Page 3 of 5 Issue date: December 5, 2012
Exposure limits
Ingredient(s) Exposure Limits
Engineering Controls Use only under good ventilation conditions or with respiratory protection.
Personal protective equipment
Eye / face protection Wear safety glasses with side shields.
Hand protection Wear appropriate chemical resistant gloves.
Skin and body protection As required by employer code.
Respiratory protection Not normally required if good ventilation is maintained and exposure guidelines are not
exceeded. Where exposure guideline levels may be exceeded, use an approved NIOSH
respirator.
General hygiene considerations Handle in accordance with good industrial hygiene and safety practice. When using do not
eat or drink. Wash hands before breaks and immediately after handling the product.
9. Physical and Chemical properties
Appearance Transparent liquid.
Color White to slightly yellow.
Form Liquid.
Odor Characteristic.
Odor threshold Not available.
Physical state Liquid.
pH N/A
Freezing point -40 F.
Boiling point Approximate 400 F
Flash point 275F.
Evaporation rate 1.1 approx (n-Bu Acetate=1)
Flammability limits in air, LEL:1.4% @ 77 F. UEL: 9.3% @ 77F.
Vapor pressure 0.52mm Hg @ 68 F.
Vapor density 5.40 @ 1 atm (Air=1)
VOC (% weight) 90-98%
Specific gravity 0.98 @ 25C.
Octanol/water coefficient Not available.
Solubility (H2O) Less than 0.01% @ 77 F.
Auto-ignition temperature 441 F.
Percent volatile Less than 1%
10. Chemical Stability & Reactivity Information
Chemical stability Stable under recommended storage conditions.
Conditions to avoid Do not mix with other chemicals.
Incompatible materials Strong oxidizing agents. Acids.
Hazardous decomposition products May include and are not limited to: Oxides of carbon. Silicone dioxide. Formaldehyde
when heated to decomposition.
Possibility of hazardous reactions Hazardous polymerization does not occur.
7/22/2019 Norlube 3030 MSDS
4/5
Norlube 3030 Page 4 of 5 Issue date: December 5, 2012
11. Toxicological Information
Please refer to Section 3 for information on potential health effects.
12. Ecological InformationEcotoxicity Components of this product have been identified as having potential environmental
concerns.
Environmental effects Not available
Aquatic toxicity Not available
Persistency / degradability Not available
Bioaccumulation / accumulation Not available
Partition coefficient Not available
Mobility in environmental media Not available
Chemical fate information Not available
13. Disposal Considerations
Waste codes Not available
Disposal instructions Review federal, provincial, and local government requirements prior to disposal.
Waste from residues / unused Not available
ProductsContaminated packaging Not available
14. Transport Information
Department of Transportation (DOT)
Transportation of Dangerous Goods (TDG)
Not regulated as dangerous goods.
15. Regulatory Information
US Federal regulations CERCLA/SARA Hazardous Substances Not applicable.
Occupational Safety and Health Administration (OSHA)
29 CFR 1910.1200 hazardous - Yes.
CERCLA (Superfund) reportable quantity- If this product is accidentally spilled, it is not subject to any special reporting.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate Hazard Yes
Delayed Hazard No
Fire Hazard Yes
Reactivity Hazard No
Section 302 extremely hazardous substance -No
Section 311 hazardous chemical - No
Clean Air Act (CAA) Not available
Clean Water Act (CWA) This product is classified as an oil under Section 311 of 40 CFR 110.
Safe Drinking Water Act (SDWA) Not available
7/22/2019 Norlube 3030 MSDS
5/5
Norlube 3030 Page 5 of 5 Issue date: December 5, 2012
Drug Enforcement Agency (DEA) Not available
Food and Drug Administration Not available
(FDA)
16. Other Information
HIMS
Health: 1 Flammability: 1 Physical Hazard: 0 Personal Protection: 2
Disclaimer Information contained herein was obtained from sources considered technically accurate
and reliable. While every effort has been made to ensure full disclosure of product hazards,
in some cases data is not available and is so stated. Since conditions of actual product use
are beyond control of the supplier, it is assumed that users of this material have been fully
trained according to the requirements of all applicable legislation and regulatory
instruments. No warranty, expressed or implied, is made and supplier will not be liable for
any losses, injuries of consequential damages which may result from the use of or reliance
on any information contained in this document.Prepared by American Die Cast Releasants, LLC (810-714-1964)