12
NUCLEAR ENERGY

Nuclear Enegy

Embed Size (px)

Citation preview

Page 1: Nuclear Enegy

NUCLEAR ENERGY

Page 2: Nuclear Enegy

NUCLEAR ENERGY

Nuclear Energy, energy released during the splitting or fusing of atomic nuclei. The energy of any system, whether physical, chemical, or nuclear, is manifested by the system’s ability to do work or to release heat or radiation. The total energy in a system is always conserved, but it can be transferred to another system or changed in form.

Page 3: Nuclear Enegy

NUCLEAR ENERGY FROM FISSION

The two key characteristics of nuclear fission important for the practical release of nuclear energy are both evident in equation (2). First, the energy per fission is very large. In practical units, the fission of 1 kg (2.2 lb) of uranium-235 releases 18.7 million kilowatt-hours as heat. Second, the fission process initiated by the absorption of one neutron in uranium-235 releases about 2.5 neutrons, on the average, from the split nuclei. The neutrons released in this manner quickly cause the fission of two more atoms, thereby releasing four or more additional neutrons and initiating a self-sustaining series of nuclear fissions, or a chain reaction, which results in continuous release of nuclear energy.

Page 4: Nuclear Enegy

NUCLEAR ENERGY FROM FISSION

In December 1942 at the University of Chicago, the Italian physicist Enrico Fermi succeeded in producing the first nuclear chain reaction. This was done with an arrangement of natural uranium lumps distributed within a large stack of pure graphite, a form of carbon. In Fermi's “pile,” or nuclear reactor, the graphite moderator served to slow the neutrons.

Page 5: Nuclear Enegy

LIGHT-WATER REACTOR

A variety of reactor types, characterized by the type of fuel, moderator, and coolant used, have been built throughout the world for the production of electric power. In the United States, with few exceptions, power reactors use nuclear fuel in the form of uranium oxide isotopically enriched to about three percent uranium-235. The moderator and coolant are highly purified ordinary water. A reactor of this type is called a light-water reactor (LWR).

Page 6: Nuclear Enegy

PROPULSION REACTORS

Nuclear power plants similar to the PWR are used for the propulsion plants of large surface naval vessels such as the aircraft carrier USS Nimitz. The basic technology of the PWR system was first developed in the U.S. naval reactor program directed by Admiral Hyman G. Rickover. Reactors for submarine propulsion are generally physically smaller and use more highly enriched uranium to permit a compact core. The United States, the United Kingdom, Russia, and France all have nuclear-powered submarines with such power plants.

Page 7: Nuclear Enegy

RESEARCH REACTORS

A variety of small nuclear reactors have been built in many countries for use in education and training, research, and the production of radioactive isotopes. These reactors generally operate at power levels near one MW, and they are more easily started up and shut down than larger power reactors.

Page 8: Nuclear Enegy

BREEDER REACTORS

The key feature of a breeder reactor is that it produces more fuel than it consumes. It does this by promoting the absorption of excess neutrons in a fertile material. Several breeder reactor systems are technically feasible.

Page 9: Nuclear Enegy

NUCLEAR FUEL AND WASTES

The hazardous fuels used in nuclear reactors present handling problems in their use. This is particularly true of the spent fuels, which must be stored or disposed of in some way.

Page 10: Nuclear Enegy

NUCLEAR FUSION

The release of nuclear energy can occur at the low end of the binding energy curve (see accompanying chart) through the fusion of two light nuclei into a heavier one. The energy radiated by stars, including the Sun, arises from such fusion reactions deep in their interiors. At the enormous pressure and at temperatures above 15 million ° C (27 million ° F) existing there, hydrogen nuclei combine according to equation (1) and give rise to most of the energy released by the Sun.

Page 11: Nuclear Enegy

NUCLEAR FUSION

A plasma hot enough for fusion cannot be contained by ordinary materials. The plasma would cool very rapidly, and the vessel walls would be destroyed by the extreme heat. However, since the plasma consists of charged nuclei and electrons, which move in tight spirals around the lines of force of strong magnetic fields, the plasma can be contained in a properly shaped magnetic field region without reacting with material walls.

Page 12: Nuclear Enegy

NUCLEAR FUSION

If fusion energy does become practical, it offers the following advantages: (1) a limitless source of fuel, deuterium from the ocean; (2) no possibility of a reactor accident, as the amount of fuel in the system is very small; and (3) waste products much less radioactive and simpler to handle than those from fission systems.