Oglasnik za normativne dokumente · HRN ISO 15501-2:2017 en pr Cestovna vozila – Sustavi za stlačeni prirodni plin (SPP) kao gorivo – 2. dio: Metode ispitivanja (ISO 15501-2:2016)

Hrvatski zavod za norme

Oglasnik za normativne dokumente 7/2017 srpanj, 2017.

Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti.

Izdavač:

A� HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije

Sadržaj:

1 Rezultatihrvatskenormizacije.................................................................................................. A3

1.1 Hrvatske norme ....................................................................................................................................... A3

1.� Nacrti hrvatskih norma ............................................................................................................................

1.3 Prijedlozizaprihvaćanjestranihnormauizvorniku................................................................................A10

1.4 Povučenehrvatskenorme......................................................................................................................A�0

1.5 Povučeninacrtihrvatskihnorma.............................................................................................................

1.6 Ispravci hrvatskih norma ......................................................................................................................... A�4

1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku ......................................................................A�5

1.8 Drugi normativni dokumenti .....................................................................................................................

1.9 OpćaizdanjaHZN-a................................................................................................................................

1.10 Prijevodi hrvatskih normativnih dokumenata ...........................................................................................

2 Rezultatimeđunarodneieuropskenormizacijerazvrstani popredmetnomustroju................................................................................................................ A�6

HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije A3

Rezultatihrvatskenormizacije

1.1 Hrvatske norme

Temeljem Zakona o normizaciji (Narodne novine 80/�013) hrvatske norme priprema, izdaje i objavljuje Hrvatski zavod za norme, na prijedlogtehničkihodbora.Hrvatskenormemogunastatinaovačetirinačina:-prihvaćanjemstranih(međunarodnih/europskih/nacionalnih)normauzprevođenjenahrvatskijezik(pp)-prihvaćanjemstranihnormauizvornikushrvatskimovitkom(po)-prihvaćanjemstranihnormauizvornikuobjavomobavijestioprihvaćanju(pr)- izradbom izvorne hrvatske norme (izv).

Oznaka načina prihvaćanja navedena je uz referencijsku oznakuhrvatske norme. Hrvatske su norme zainteresiranima na raspolaganju u Normoteci Hrvatskoga zavoda za norme, Ulica grada Vukovara 78, Zagreb.

HZN/TO 22, Cestovna vozila

HRNISO2575:2012/A5:2017en prCestovnavozila–Simbolizaupravljačkenaprave,indikatoreipokaznesvjetiljke(ISO2575:2010/Amd5:2016)Roadvehicles–Symbolsforcontrols,indicatorsandtell-tales(ISO2575:2010/Amd5:2016)

HRNISO3536:2017en prCestovna vozila – Materijali za sigurnosno ostakljenje –Terminološkirječnik(ISO3536:2016)Road vehicles – Safety glazing materials – Vocabulary (ISO3536:2016)

HRNISO6460-1:2012/A1:2017en prMotocikli – Metoda mjerenja emisija ispušnih plinova i potrošnje goriva – 1. dio: Opći ispitni zahtjevi (ISO6460-1:2007/Amd1:2015)Motorcycles – Measurement method for gaseous exhaustemissions and fuel consumption – Part 1: General testrequirements(ISO6460-1:2007/Amd1:2015)

HRNISO6460-3:2012/A1:2017en prMotocikli – Metoda mjerenja emisija ispušnih plinova i potrošnje goriva – 3. dio: Mjerenje potrošnje goriva prikonstantnojbrzini(ISO6460-3:2007/Amd1:2015)Motorcycles – Measurement method for gaseousexhaust emissions and fuel consumption – Part 3:Fuel consumption measurement at a constant speed (ISO6460-3:2007/Amd1:2015)

HRNISO7637-3:2017en prCestovnavozila–Električnesmetnjekojenastajuvođenjemi sprezanjem – 3. dio: Prijenos električnih tranzijenatakapacitivnim ili induktivnim sprezanjem vodovima koji nisu namijenjeninapajanju(ISO7637-3:2016)Road vehicles – Electrical disturbances from conductionand coupling – Part 3: Electrical transient transmission bycapacitive and inductive coupling via lines other than supply lines(ISO7637-3:2016)

HRNISO11452-3:2017en prCestovnavozila–Metodeispitivanjasastavnicanaelektričnesmetnje od uskopojasnoga zračenja elektromagnetskeenergije – 3. dio: Transverzalna elektromagnetska (TEM)komora(ISO11452-3:2016)Road vehicles – Component test methods for electricaldisturbances from narrowband radiated electromagneticenergy – Part 3: Transverse electromagnetic (TEM) cell (ISO11452-3:2016)

HRNISO14230-2:2017en prCestovna vozila – Dijagnostička veza preko K-linije (DoK-Line)–2.dio:Slojpodatkovneveze(ISO14230-2:2016)Roadvehicles–DiagnosticcommunicationoverK-Line(DoK-Line)–Part2:Datalinklayer(ISO14230-2:2016)

HRNISO15082:2017en prCestovna vozila – Ispitivanja materijala za sigurnosno ostakljenjeodkruteplastike(ISO15082:2016)Roadvehicles–Testsforrigidplasticsafetyglazingmaterials(ISO15082:2016)

HRNISO15501-1:2017en prCestovnavozila–Sustavizastlačeniprirodniplin(SPP)kaogorivo–1.dio:Sigurnosnizahtjevi(ISO15501-1:2016)Roadvehicles–Compressednaturalgas(CNG)fuelsystems–Part1:Safetyrequirements(ISO15501-1:2016)

HRNISO15501-2:2017en prCestovnavozila–Sustavizastlačeniprirodniplin(SPP)kaogorivo–2.dio:Metodeispitivanja(ISO15501-2:2016)Roadvehicles–Compressednaturalgas(CNG)fuelsystems–Part2:Testmethods(ISO15501-2:2016)

HRNISO16845-1:2017en prCestovnavozila–Postupakprovjereusklađenostiregulatoramrežnogpodručja (CAN)–1.dio:Slojpodatkovnemreže ifizičkasignalizacija(ISO16845-1:2016)Roadvehicles–Controllerareanetwork(CAN)conformancetest plan – Part 1: Data link layer and physical signalling (ISO16845-1:2016)

HRNISO16845-2:2017en prCestovnavozila–Postupakprovjereusklađenostiregulatoramrežnog područja (CAN) – 2. dio: Jedinica za pristupmediju velike brzine sa selektivnom funkcijom aktiviranja (ISO16845-2:2014)Roadvehicles–Controllerareanetwork(CAN)conformancetest plan – Part 2: High-speed medium access unit withselectivewake-upfunctionality(ISO16845-2:2014)

HZN/TO 23, Traktori i strojevi za poljoprivredu i šumarstvo

HRNENISO4254-12:2013/A1:2017en prPoljoprivredna mehanizacija – Sigurnost – 12. dio:Rotacijske kosilice s diskom, rotacijske kosilice s bubnjem i kosilice s roto-udaračima (ISO 4254-12:2012/Amd 1:2017; ENISO4254-12:2012/A1:2017)Agriculturalmachinery–Safety–Part12:Rotarydiscanddrummowers and flail mowers (ISO 4254-12:2012/Amd 1:2017; ENISO4254-12:2012/A1:2017)

HRNISO11784:2006/A2:2017en prRadiofrekvencijska identifikacija životinja – Strukturakodova – Amandman 2: Oznaka za napredni transponder (ISO11784:1996/Amd2:2010)Radio frequency identification of animals – Code structure– Amendment 2: Indication of an advanced transponder (ISO11784:1996/Amd2:2010)

HZN/TO 44, Zavarivanje i srodni postupci

HRNENISO636:2017en prDodatni i potrošni materijali za zavarivanje – Šipke, žice idepoziti zaTIG zavarivanje nelegiranih i sitnozrnatih čelika–Razredba(ISO636:2017;ENISO636:2017)Welding consumables – Rods, wires and deposits fortungsteninertgasweldingofnon-alloyandfine-grainsteels–Classification(ISO636:2017;ENISO636:2017)

HRNEN13479:2017en prDodatni i potrošni materijali za zavarivanje – Opća normaza proizvod za dodatne materijale i praškove za zavarivanje metalnihmaterijalataljenjem(EN13479:2017)Welding consumables – General product standard for fillermetals and fluxes for fusion welding of metallic materials (EN13479:2017)

HRNENISO14555:2017en prZavarivanje–Elektrolučnozavarivanjesvornjakaodmetalnihmaterijala(ISO14555:2017;ENISO14555:2017)Welding – Arc stud welding of metallic materials (ISO14555:2017;ENISO14555:2017)

HRNENISO15614-1:2017en prSpecifikacija i kvalifikacija postupaka zavarivanja zametalne materijale – Ispitivanje postupka zavarivanja –1.dio:Elektrolučnoiplinskozavarivanječelikaielektrolučnozavarivanje nikla i legura nikla (ISO 15614-1:2017; ENISO15614-1:2017)Specification and qualification of welding procedures formetallicmaterials–Weldingproceduretest–Part1:Arcandgas welding of steels and arc welding of nickel and nickelalloys(ISO15614-1:2017;ENISO15614-1:2017)

A4 HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije

HZN/TO 69, Primjena statističkih metoda

HRNISO11843-5:2012/A1:2017en prSposobnost detekcije – 5. dio: Metodologija u slučajevimalinearneinelinearnekalibracije(ISO11843-5:2008/Amd1:2017)Capabilityofdetection–Part5:Methodologyinthelinearandnon-linearcalibrationcases(ISO11843-5:2008/Amd1:2017)

HZN/TO 92, Zaštita od požara

HRNEN1364-5:2017en prIspitivanjaotpornostinapožarnenosivihelemenata–5.dio:Rešetkezaprijenoszraka(EN1364-5:2017)Fireresistancetestsfornon-loadbearingelements–Part5:Airtransfergrilles(EN1364-5:2017)

HZN/TO 108, Mehaničke vibracije i udari

HRNISO21940-2:2017en prMehaničke vibracije – Uravnoteživanje rotora – 2. dio:Terminološkirječnik(ISO21940-2:2017)Mechanicalvibration–Rotorbalancing–Part2:Vocabulary(ISO21940-2:2017)

HZN/TO 136, Namještaj

HRNEN716-1:2017en prNamještaj–Dječjikrevetiiprijenosnidječjikrevetizakućnuuporabu–1.dio:Sigurnosnizahtjevi(EN716-1:2017)Furniture–Children’scotsandfoldingcotsfordomesticuse–Part1:Safetyrequirements(EN716-1:2017)

HRNEN716-2:2017en prNamještaj–Dječjikrevetiiprijenosnidječjikrevetizakućnuuporabu–2.dio:Metodeispitivanja(EN716-2:2017)Furniture–Children’scotsandfoldingcotsfordomesticuse–Part2:Testmethods(EN716-2:2017)

HZN/TO 146, Kvaliteta zraka

HRNEN16897:2017en prProfesionalnaizloženost–Karakterizacijaultrafinihaerosola/nanoaerosola – Određivanje brojčane koncentracijeupotrebombrojačakondenziranihčestica(EN16897:2017)Workplaceexposure–Characterizationofultrafineaerosols/nanoaerosols–Determinationofnumberconcentrationusingcondensationparticlecounters(EN16897:2017)

HZN/TO 147, Kvaliteta vode

HRNENISO9697:2017enprKvaliteta vode – Mjerenje ukupne beta aktivnosti uslatkoj vodi – Metoda debelog izvora (ISO 9697:2015; ENISO9697:2017)Water quality – Gross beta activity in non-saline water– Test method using thick source (ISO 9697:2015; ENISO9697:2017)

HRNENISO11731:2017en prKvaliteta vode – Brojenje Legionella (ISO 11731:2017; ENISO11731:2017)Waterquality–EnumerationofLegionella(ISO11731:2017;ENISO11731:2017)

HRNENISO13843:2017en prKvalitetavode–Zahtjevizautvrđivanjeizvedbenihznačajkakvantitativnih mikrobioloških metoda (ISO 13843:2017; ENISO13843:2017)Water quality –Requirements for establishing performancecharacteristics of quantitative microbiological methods (ISO13843:2017;ENISO13843:2017)

HZN/TO 163, Toplinska izolacija

HRNEN16382:2017en prToplinsko izolacijski proizvodi za primjenu u zgradarstvu –Određivanjeotpornostina izvlačenjepločastihsidarakrozproizvodezatoplinskuizolaciju(EN16382:2016)Thermal insulation products for building applications –Determinationofthepull-throughresistanceofplateanchorsthroughthermalinsulationproducts(EN16382:2016)

HRNEN16383:2017en prToplinsko-izolacijski proizvodi za primjenu u zgradarstvu – Određivanje ponašanja s obzirom na toplinu i vlagukompozitnihsustavavanjsketoplinskeizolacijesažbukama(ETICS)(EN16383:2016)Thermal insulating products for building applications– Determination of the hygrothermal behaviour of externalthermal insulationcompositesystemswith renders (ETICS)(EN16383:2016)

HZN/TO 179, Zidane konstrukcije

HRNEN15824:2017en prSpecifikacijezavanjskeiunutarnježbukenaosnoviorganskihveziva(EN15824:2017)Specificationsforexternalrendersandinternalplastersbasedonorganicbinders(EN15824:2017)

HZN/TO 211, Geoinformacije/Geomatika

HRNISO19103:2017en prGeoinformacije–Jezikkonceptualnesheme(ISO19103:2015)Geographic information – Conceptual schema language (ISO19103:2015)

HZN/TO 217, Kozmetika

HRNENISO16212:2017en prKozmetika – Mikrobiologija – Određivanje broja kvasaca iplijesni(ISO16212:2017;ENISO16212:2017)Cosmetics–Microbiology–Enumerationofyeastandmould(ISO16212:2017;ENISO16212:2017)

HRNENISO18415:2017en prKozmetika – Mikrobiologija – Dokazivanje specifičnihi nespecifičnih mikroorganizama (ISO 18415:2017; ENISO18415:2017)Cosmetics – Microbiology – Detection of specifiedand non-specified microorganisms (ISO 18415:2017; ENISO18415:2017)

HRNENISO21148:2017en prKozmetika –Mikrobiologija –Opće upute zamikrobiološkaispitivanja(ISO21148:2017;ENISO21148:2017)Cosmetics – Microbiology – General instructions formicrobiologicalexamination(ISO21148:2017;ENISO21148:2017)

HRNENISO21149:2017en prKozmetika – Mikrobiologija – Određivanje broja i dokazivanje aerobnih mezofilnih bakterija (ISO 21149:2017; ENISO21149:2017)Cosmetics – Microbiology – Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2017; ENISO21149:2017)

HZN/TO 218, Drvo

HRNEN14915:2017en prZidneistropneoblogeodcjelovitogadrva–Značajke,zahtjeviioznačivanje(EN14915:2013+A1:2017)Solid wood panelling and cladding – Characteristics,requirementsandmarking(EN14915:2013+A1:2017)

HZN/TO 219, Podne obloge

HRNENISO9405:2017en prTekstilne podne obloge – Ocjena promjene izgleda (ISO9405:2015;ENISO9405:2017)Textilefloorcoverings–Assessmentofchangesinappearance(ISO9405:2015;ENISO9405:2017)

HZN/TO 503, Metalni materijali

HRNENISO16120-1:2017en prValjanažicaodnelegiranogčelikazavučenjeužicu–1.dio:Općizahtjevi(ISO16120-1:2017;ENISO16120-1:2017)Non-alloy steel wire rod for conversion to wire– Part 1: General requirements (ISO 16120-1:2017; ENISO16120-1:2017)

HRNENISO16120-4:2017en prValjanažicaodnelegiranogčelikazavučenjeužicu–4.dio: Posebni zahtjevi za valjanu žicu za posebnu primjenu (ISO16120-4:2017;ENISO16120-4:2017)Non-alloy steel wire rod for conversion to wire – Part 4:Specific requirements for wire rod for special applications(ISO16120-4:2017;ENISO16120-4:2017)


HZN/TO 504, Korozija i zaštita metala i legura

HRNENISO15257:2017en prKatodna zaštita – Razine osposobljenosti osoba koje sebavekatodnomzaštitom–Osnovazacertifikacijskushemu (ISO15257:2017;ENISO15257:2017)Cathodic protection – Competence levels of cathodicprotection persons – Basis for certification scheme (ISO15257:2017;ENISO15257:2017)

HZN/TO 506, Materijali, oprema i konstrukcije za naftnu industriju, prirodni plin i geotermalnu vodu

HRNENISO16664:2017en prAnaliza plina – Postupanje s plinovima i plinskim smjesama za umjeravanje–Upute(ISO16664:2017;ENISO16664:2017)Gasanalysis–Handlingofcalibrationgasesandgasmixtures–Guidelines(ISO16664:2017;ENISO16664:2017)

HZN/TO 524, Inteligentni transportni sustavi

HRNENISO12813:2016/A1:2017en prElektronička naplata – Komunikacija provjere sukladnostiza autonomne sustave (ISO 12813:2015/Amd 1:2017; ENISO12813:2015/A1:2017)Electronicfeecollection–Compliancecheckcommunicationfor autonomous systems (ISO 12813:2015/Amd 1:2017; ENISO12813:2015/A1:2017)

HRNENISO13141:2016/A1:2017en prElektronička naplata – Komunikacija pojačane lokalizacijeza autonomne sustave (ISO 13141:2015/Amd 1:2017; ENISO13141:2015/A1:2017)Electronic fee collection – Localisation augmentation communicationforautonomoussystems(ISO13141:2015/Amd1:2017;ENISO13141:2015/A1:2017)

HZN/TO 528, Oprema za željeznice

HRNEN16587:2017en prŽeljeznički sustav – Oblikovanja namijenjena osobamasmanjene pokretljivosti – Zahtjevi za infrastrukturu kojauključujeputevebezprepreka(EN16587:2017)Railwayapplications–DesignforPRMUse–Requirementsonobstaclefreeroutesforinfrastructure(EN16587:2017)

HZN/TO 530, Čelična užad, lanci, dizalične kuke, trake, omče i pribor

HRNISO606:2017en prKratkočlanipogonskipreciznivaljčastiituljčastilanci,nosivespojniceipripadajućilančanici(ISO606:2015)Short-pitch transmission precision roller and bush chains, attachmentsandassociatedchainsprockets(ISO606:2015)

HRNISO4347:2017en prPločastilanci,priključniciiglatkilančanici–Dimenzije,mjernesileiprekidnačvrstoća(ISO4347:2015)Leaf chains, clevises and sheaves – Dimensions,measuring forces, tensile strengths and dynamic strengths (ISO4347:2015)

HRNISO15654:2017en prMetodaispitivanjadinamičkeizdržljivostipogonskihpreciznihvaljčastihlanaca(ISO15654:2015)Fatigue testmethod for transmissionprecision rollerchainsandleafchains(ISO15654:2015)

HZN/TO 531, Plastika i guma

HRNENISO294-1:2017en prPlastika – Injekcijsko prešani ispitci plastomernih materijala – 1. dio: Opća načela i prešanje višenamjenskih ispitaka ištapića(ISO294-1:2017;ENISO294-1:2017)Plastics–Injectionmouldingoftestspecimensofthermoplasticmaterials – Part 1: General principles, and moulding ofmultipurpose and bar test specimens (ISO 294-1:2017; ENISO294-1:2017)

HRNENISO5659-2:2017en prPlastika – Stvaranje dima – 2. dio: Određivanje optičkegustoće jednokomornim ispitivanjem (ISO 5659-2:2017; ENISO5659-2:2017)Plastics – Smoke generation – Part 2: Determination ofoptical density bya single-chamber test (ISO5659-2:2017; ENISO5659-2:2017)

HRNENISO6806:2017en prGumena crijeva i crijevni uređaji za upotrebu u naftnimplamenicima–Specifikacija(ISO6806:2017;ENISO6806:2017) Rubber hoses and hose assemblies for use in oil burners–Specification(ISO6806:2017;ENISO6806:2017)

HRNENISO20568-1:2017en prPlastika – Fluoropolimerne disperzije i materijali za injekcijsko prešanjeiekstrudiranje–1.dio:Sustavoznačivanjaiosnovezaspecifikacije(ISO20568-1:2017;ENISO20568-1:2017)Plastics – Fluoropolymer dispersions and moulding and extrusionmaterials–Part1:Designationsystemandbasisforspecifications(ISO20568-1:2017;ENISO20568-1:2017)

HRNENISO20568-2:2017en prPlastika – Fluoropolimerne disperzije i materijali za injekcijsko prešanje i ekstrudiranje – 2. dio: Pripremaispitnihuzoraka iodređivanjesvojstava(ISO20568-2:2017; ENISO20568-2:2017)Plastics – Fluoropolymer dispersions and moulding and extrusionmaterials–Part2:Preparationof test specimensand determination of properties (ISO 20568-2:2017; ENISO20568-2:2017)

HZN/TO 533, Kolničke konstrukcije

HRNEN12697-18:2017en prBitumenske mješavine – Metode ispitivanja – 18. dio:Ocjeđivanjeveziva(EN12697-18:2017)Bituminous mixtures – Test methods – Part 18: Binderdrainage(EN12697-18:2017)

HRNEN12697-27:2017en prBitumenske mješavine – Metode ispitivanja – 27. dio:Uzorkovanje(EN12697-27:2017)Bituminous mixtures – Test methods – Part 27: Sampling (EN12697-27:2017)

HRNEN14187-1:2017en prHladnebrtvenemase–Metodeispitivanja–1.dio:Određivanjebrzineotvrdnjivanja(EN14187-1:2017)Cold applied joint sealants – Test methods – Part 1:Determinationofrateofcure(EN14187-1:2017)

HZN/TO 541, Sustavi grijanja, ventilacije i klimatizacije u građevinama

HRNEN13141-3:2017en prVentilacija u zgradama – Ispitivanje značajka dijelova/proizvodazaventilacijustambenihzgrada–3.dio:Otsisnenapebezventilatorazastanove(EN13141-3:2017)Ventilationforbuildings–Performancetestingofcomponents/productsforresidentialventilation–Part3:Rangehoodsforresidentialusewithoutfan(EN13141-3:2017)

HRICEN/TR16798-6:2017en prEnergijskasvojstvazgrada–Ventilacijauzgradama–6.dio:TumačenjezahtjevaunormamaEN16798-5-1iEN16798-5-2 – Metoda proračuna energijskih zahtjeva za sustave ventilacije i klimatizacije (Moduli M5-6, M5-8, M6-5, M6-8, M7-5,M7-8)(CEN/TR16798-6:2017)Energy performance of buildings – Ventilation for buildings –Part6: Interpretationoftherequirements inEN16798-5-1 and EN 16798-5-2 – Calculation methods for energyrequirements of ventilation and air conditioning systems(Modules M5-6, M5-8, M 6-5, M6-8, M7-5, M7-8) (CEN/TR16798-6:2017)

HRNEN16798-7:2017en prEnergijskasvojstvazgrada–Ventilacijauzgradama–7.dio:Metodeproračunazaodređivanjeprotokazrakauzgradamauključujućiinfiltraciju(ModuliM5-5)(EN16798-7:2017)Energy performance of buildings – Ventilation for buildings– Part 7: Calculation methods for the determination of airflow rates in buildings including infiltration (Modules M5-5) (EN16798-7:2017)

HRICEN/TR16798-8:2017en prEnergijskasvojstvazgrada–Ventilacijauzgradama–8.dio:TumačenjezahtjevaunormiEN16798-7–Metodeproračunaza određivanje protoka zraka u zgradama uključujući infiltraciju–(ModulM5-5)(CEN/TR16798-8:2017)Energy performance of buildings – Ventilation for buildings– Part 8: Interpretation of the requirements in EN 16798-7 – Calculation methods for the determination of air flowrates in buildings including infiltration – (Module M5-5) (CEN/TR16798-8:2017)


HRNEN16798-9:2017en prEnergijskasvojstvazgrada–Ventilacijauzgradama–9.dio:Metodeproračunaenergijskihzahtjevazasustavehlađenja(ModuliM4-1,M4-4,M4-9)–Općenito(EN16798-9:2017)Energy performance of buildings – Ventilation for buildings– Part 9: Calculation methods for energy requirements ofcooling systems (Modules M4-1, M4-4, M4-9) – General (EN16798-9:2017)

HRICEN/TR16798-10:2017en prEnergijska svojstva zgrada – Ventilacija u zgradama –10.dio:TumačenjezahtjevaunormiEN16798-9–Metodeproračuna energijskih zahtjeva sustava hlađenja (Moduli M4-1,M4-4,M4-9)–Općenito(CEN/TR16798-10:2017)Energy performance of buildings – Ventilation for buildings–Part10: Interpretationof therequirements inEN16798-9 – Calculation methods for energy requirements ofcooling systems (Module M4-1, M4-4, M4-9) – General (CEN/TR16798-10:2017)

HRNEN16798-13:2017en prEnergijskasvojstvazgrada–Ventilacijauzgradama–13.dio: Proračun sustava hlađenja (Modul M4-8) – Proizvodnja (EN16798-13:2017)Energy performance of buildings – Ventilation for buildings– Part 13: Calculation of cooling systems (Module M4-8) –Generation(EN16798-13:2017)

HRICEN/TR16798-14:2017en prEnergijskasvojstvazgrada–Ventilacijauzgradama–14.dio: Tumačenje zahtjeva u normi EN 16798-13 – Proračunsustava hlađenja (Modul M4-8) – Proizvodnja (CEN/TR16798-14:2017)Energy performance of buildings – Ventilation for buildings–Part14:InterpretationoftherequirementsinEN16798-13–Calculationofcoolingsystems(ModuleM4-8)–Generation(CEN/TR16798-14:2017)

HRNEN16798-15:2017en prEnergijskasvojstvazgrada–Ventilacijauzgradama–15.dio: Proračun sustava hlađenja (Modul M4-7) – Akumulacija (EN16798-15:2017)Energy performance of buildings – Ventilation for buildings– Part 15: Calculation of cooling systems (Module M4-7) –Storage(EN16798-15:2017)

HRICEN/TR16798-16:2017en prEnergijska svojstva zgrada – Ventilacija u zgradama – 16. dio: Tumačenje zahtjeva u normi EN 16798-15– Proračun sustava hlađenja (ModulM4-7 ) –Akumulacija(CEN/TR16798-16:2017)Energy performance of buildings – Ventilation for buildings–Part16:InterpretationoftherequirementsinEN16798-15–Calculation of cooling systems (ModuleM4-7) – Storage(CEN/TR16798-16:2017)

HRNEN16798-17:2017en prEnergijska svojstva zgrada – Ventilacija u zgradama –17.dio:Smjernicezapregledsustavaventilacijeiklimatizacije(ModuliM4-11,M5-11,M6-11,M7-11)(EN16798-17:2017)Energy performance of buildings – Ventilation for buildings– Part 17: Guidelines for inspection of ventilation and airconditioning systems (Module M4-11, M5-11, M6-11, M7-11) (EN16798-17:2017)

HRICEN/TR16798-18:2017en prEnergijska svojstva zgrada – Ventilacija u zgradama – 18. dio: Tumačenje zahtjeva u normi EN 16798-17 – Smjernice za pregled sustava ventilacije i klimatizacije (ModuliM4-11,M5-11,M6-11,M7-11)(CEN/TR16798-18:2017)Energy performance of buildings – Ventilation for buildings–Part18:InterpretationoftherequirementsinEN16798-17 –Guidelinesforinspectionofventilationandair-conditioningsystems (Modules M4-11, M5-11, M6-11, M7-11) (CEN/TR16798-18:2017)

HZN/TO 550, Opskrba vodom

HRNEN1017:2017en prKemikalije koje se upotrebljavaju u obradi vodenamijenjene ljudskoj potrošnji – Polužareni dolomit (EN1017:2014+A1:2017)Chemicals used for treatment ofwater intended for humanconsumption–Half-burntdolomite(EN1017:2014+A1:2017)

HZN/TO 551, Gradnja

HRNENISO10563:2017en prZgradeiinženjerskegrađevine–Brtvila–Određivanjepromjenemaseiobujma(ISO10563:2017;ENISO10563:2017)Buildings and civil engineering works – Sealants– Determination of change in mass and volume (ISO10563:2017;ENISO10563:2017)

HZN/TO 553, Predgotovljeni proizvodi

HRNEN16757:2017en prOdrživost građevina – Izjava zaštite okoliša – Pravila zakategorizaciju proizvoda za beton i betonske elemente (EN16757:2017)Sustainabilityofconstructionworks–Environmentalproductdeclarations – Product Category Rules for concrete andconcreteelements(EN16757:2017)

HZN/TO 556, Osobna zaštitna oprema

HRNEN1384:2017en prKacigezakonjičkeaktivnosti(EN1384:2017)Helmetsforequestrianactivities(EN1384:2017)

HZN/TO 561, Kotlovi, posude pod tlakom, cjevovodi i plinske boce

HRNEN1439:2017en prOprema i pribor za UNP – Postupak provjere prenosivih, ponovno punjivih boca za UNP prije punjenja, tijekom punjenja inakonpunjenja(EN1439:2017)LPG equipment and accessories – Procedure for checkingtransportablerefillableLPGcylindersbefore,duringandafterfilling(EN1439:2017)

HRNEN1860-1:2017en prAparati, kruta goriva i sredstva za potpalu za roštiljanje –1.dio:Roštiljinakrutagoriva–Zahtjeviimetodeispitivanja(EN1860-1:2013+A1:2017)Appliances, solid fuels and firelighters for barbecueing –Part1:Barbecuesburningsolidfuels–Requirementsandtestmethods(EN1860-1:2013+A1:2017)

HRNEN13480-3:2012/A1:2017en prMetalniindustrijskicjevovodi–3.dio:Projektiranjeiproračun(EN13480-3:2012/A1:2017)Metallic industrial piping – Part 3: Design and calculation (EN13480-3:2012/A1:2017)

HRNEN13480-4:2012/A5:2017en prMetalni industrijski cjevovodi – 4. dio: Izrada i ugradnja (EN13480-4:2012/A5:2017)Metallicindustrialpiping–Part4:Fabricationandinstallation(EN13480-4:2012/A5:2017)

HRNEN13952:2017en prOprema i pribor za UNP – Postupci punjenja UNP boca (EN13952:2017)LPGequipmentandaccessories–FillingproceduresforLPGcylinders(EN13952:2017)

HZN/TO 568, Analiza hrane – horizontalne metode, mikrobiologija, posuđe i pribor u kontaktu s hranom

HRNENISO19020:2017en prMikrobiologija u lancu hrane – Horizontalna metoda za imunoenzimsko dokazivanje prisutnosti stafilokoknihenterotoksinauhrani(ISO19020:2017;ENISO19020:2017)Microbiology of the food chain –Horizontalmethod for theimmunoenzymaticdetectionofstaphylococcalenterotoxinsinfoodstuffs(ISO19020:2017;ENISO19020:2017)

HZN/TO 573, Elektronički račun

HRNEN16931-1:2017en prElektronički račun – 1. dio: Semantički model podatakaosnovnihelemenataelektroničkogračuna(EN16931-1:2017)Electronicinvoicing–Part1:Semanticdatamodelofthecoreelementsofanelectronicinvoice(EN16931-1:2017)

HRSCEN/TS16931-2:2017en prElektroničkiračun–2.dio:ListasintaksiuskladusEN16931-1 (CEN/TS16931-2:2017)Electronicinvoicing–Part2:ListofsyntaxesthatcomplywithEN16931-1(CEN/TS16931-2:2017)


HZN/TO E2, Rotacijski strojevi

HRNEN60034-12:2017enprRotacijski električni strojevi – 12. dio: Zaletna svojstvajednobrzinskih trofaznih kaveznih indukcijskih motora (IEC60034-12:2016;EN60034-12:2017)Rotatingelectricalmachines–Part12:Startingperformanceof single-speed three-phase cage induction motors (IEC60034-12:2016;EN60034-12:2017)

HRNEN60034-18-42:2017en prRotacijski električni strojevi – Dio 18-42: Električnisustavi izolacije otporni na parcijalna izbijanja (tip II), koji se upotrebljavaju u rotacijskim električnim strojevimanapajanimaizpretvaračanapona–Kvalifikacijskaispitivanja (IEC60034-18-42:2017;EN60034-18-42:2017)Rotatingelectricalmachines–Part18-42:Partialdischargeresistant electrical insulation systems (Type II) used in rotating electricalmachinesfedfromvoltageconverters–Qualificationtests(IEC60034-18-42:2017;EN60034-18-42:2017)

HZN/TO E13, Oprema za mjerenje električne energije te upravljanje tarifom i potrošnjom

HRNEN62056-7-3:2017en prRazmjenapodatakamjerenja električne energije –OpremaDLMS/COSEM (Device Language Message Specification /CompanionSpecificationforEnergyMetering)–Dio7-3:Žičnii bežičniM-Bus komunikacijski profili za lokalne i susjednemreže(IEC62056-7-3:2017;EN62056-7-3:2017)Electricity metering data exchange – The DLMS/COSEM suite – Part 7-3: Wired and wireless M-Buscommunicationprofilesforlocalandneighbourhoodnetworks (IEC62056-7-3:2017;EN62056-7-3:2017)

HRNEN62056-8-6:2017en prRazmjenapodatakamjerenja električne energije –OpremaDLMS/COSEM (Device Language Message Specification/Companion Specification for Energy Metering) – Dio 8-6:PLC ISO/IEC12139-1komunikacijskiprofilvelikebrzinezasusjednemreže(IEC62056-8-6:2017;EN62056-8-6:2017)Electricity metering data exchange – The DLMS/COSEMSuite – Part 8-6: High speed PLC ISO/IEC 12139-1profile for neighbourhood networks (IEC 62056-8-6:2017; EN62056-8-6:2017)

HZN/TO E22, Energetska elektronika

HRNEN61800-9-1:2017en prElektromotorni sustavi prilagodljive brzine – Dio 9-1:Ekološko projektiranje za elektromotorne sustave, startere motora,energetskuelektronikuinjihovuupravljačkuprimjenu– Opći zahtjevi za određivanje energetske učinkovitostinorma za elektromotornu opremu uporabom proširenog pristupa proizvodu (EPA) i polu analitičkog modela (SAM) (IEC61800-9-1:2017;EN61800-9-1:2017)Adjustable speed electrical power drive systems –Part9-1:Ecodesignforpowerdrivesystems;motorstarters,power electronics and their driven applications – Generalrequirementsforsettingenergyefficiencystandardsforpowerdriven equipment using the extended product approach (EPA)andsemianalyticmodel(SAM)(IEC61800-9-1:2017;EN61800-9-1:2017)

HRNEN61800-9-2:2017en prElektromotorni sustavi prilagodljive brzine – Dio 9-2:Ekološko projektiranje za elektromotorne sustave, startere motora,energetskuelektronikuinjihovuupravljačkuprimjenu – Energetska učinkovitost za elektromotorne sustave i starteremotora(IEC61800-9-2:2017;EN61800-9-2:2017)Adjustablespeedelectricalpowerdrivesystems–Part9-2:Ecodesign for power drive systems, motor starters, powerelectronicsand theirdrivenapplications–Energyefficiencyindicators for power drive systems and motor starters (IEC61800-9-2:2017;EN61800-9-2:2017)

HZN/TO E34, Žarulje, svjetiljke i pripadna oprema

HRNEN60810:2015/A1:2017en prŽarulje za cestovna vozila – Izvedbeni zahtjevi (IEC60810:2014/am1:2017;EN60810:2015/A1:2017)Lamps for road vehicles – Performance requirements (IEC60810:2014/am1:2017;EN60810:2015/A1:2017)

HRNEN62612:2013/A11:2017en prŽarulje sa svjetlećim diodama s vlastitom predspojnomnapravom za opću uporabu u rasvjeti s naponomnapajanja većim od 50 V – Izvedbeni zahtjevi (EN62612:2013/A11:2017)Self-ballasted LED lamps for general lighting serviceswith supply voltages > 50 V – Performance requirements (EN62612:2013/A11:2017)

HRNEN62612:2013/A1:2017en prŽarulje sa svjetlećim diodama s vlastitom predspojnomnapravom za opću uporabu u rasvjeti s naponomnapajanja većim od 50 V – Izvedbeni zahtjevi (IEC62612:2013/am1:2015;EN62612:2013/A1:2017)Self-ballasted LED lamps for general lighting serviceswith supply voltages > 50 V – Performance requirements (IEC62612:2013/am1:2015;EN62612:2013/A1:2017)

HRNEN62717:2017en prModulisvjetlećihdiodazaopćurasvjetu–Izvedbenizahtjevi(IEC62717:2014,MOD+am1:2015,MOD;EN62717:2017)LEDmodulesforgenerallighting–Performancerequirements(IEC62717:2014,MOD+am1:2015,MOD;EN62717:2017)

HRNEN62931:2017en prCjevastežaruljesasvjetlećimdiodamaipodnoškomGX16t-5–Sigurnosnespecifikacije(IEC62931:2017;EN62931:2017)GX16t-5 capped tubular LED lamp – Safety specifications(IEC62931:2017;EN62931:2017)

HZN/TO E36, Izolatori

HRNEN50180-3:2015/A1:2017en prProvodni izolatori iznad 1 kV do 5� kV i od �50 A do 3,15 kA za transformatore punjene tekućinom – 3. dio: Zahtjevi zaučvršćenjaprovodnihizolatora(EN50180-3:2015/A1:2017)Bushingsabove1kVupto52kVandfrom250Ato3,15kA forliquidfilledtransformers–Part3:Requirementsforbushingfixations(EN50180-3:2015/A1:2017)

HZN/TO E44, Elektrotehnička sigurnost strojeva

HRNEN62745:2017en prSigurnoststrojeva–Zahtjevizabežičnesustaveupravljanjastrojevima(IEC62745:2017;EN62745:2017)Safety of machinery – Requirements for cableless controlsystemsofmachinery(IEC62745:2017;EN62745:2017)

HZN/TO E57, Upravljanje energetskim sustavom i pridružene komunikacije

HRNEN62325-451-1:2017en prOkvir za komunikaciju na tržištu električnom energijom – Dio 451-1: Poslovni proces potvrđivanja i kontekstualnimodel za CIM europsko tržište (IEC 62325-451-1:2017; EN62325-451-1:2017)Frameworkforenergymarketcommunications–Part451-1: Acknowledgement business process and contextualmodel for CIM European market (IEC 62325-451-1:2017; EN62325-451-1:2017)

HZN/TO E76, Sigurnost optičkoga zračenja i laserska oprema

HRNEN60825-1:2015/Ispr.1:2017en prSigurnost laserskih proizvoda – 1. dio: Razredba opreme izahtjevi(EN60825-1:2014/AC:2017)Safety of laser products – Part 1: Equipment classificationandrequirements(EN60825-1:2014/AC:2017)

HZN/TO E81, Zaštita od munje

HRNEN62561-1:2017en prKomponente sustava zaštite od munje (LPSC) – 1. dio:Zahtjevi za spojne komponente (IEC 62561-1:2017; EN62561-1:2017)LightningProtectionSystemComponents (LPSC)–Part 1: Requirementsforconnectioncomponents(IEC62561-1:2017; EN62561-1:2017)

HZN/TO E88, Vjetroagregati

HRNEN61400-12-1:2017en prVjetroagregati – Dio 12-1: Mjerenje značajka snagevjetroagregata koji proizvode električnu energiju (IEC61400-12-1:2017;EN61400-12-1:2017)Windturbines–Part12-1:Powerperformancemeasurementsofelectricityproducingwindturbines(IEC61400-12-1:2017;EN61400-12-1:2017)


HZN/TO E106, Elektromagnetska polja u ljudskome okolišu

HRNEN50647:2017en prOsnovnanorma za procjenu izloženosti radnika električnimimagnetskimpoljimaoduređajaiinstalacijazaproizvodnju,prijenosidistribucijuelektričneenergije(EN50647:2017)Basic standard for the evaluation of workers’ exposure toelectricandmagneticfieldsfromequipmentandinstallationsfortheproduction,transmissionanddistributionofelectricity(EN50647:2017)

HZN/TO E108, Sigurnost elektroničke opreme u području audio, video, informacijske i komunikacijske tehnologije

HRNEN62949:2017en prPosebni sigurnosni zahtjevi za opremu koja se priključujena informacijske i komunikacijskemreže (IEC 62949:2017; EN62949:2017)Particularsafetyrequirementsforequipmenttobeconnectedtoinformationandcommunicationnetworks(IEC62949:2017;EN62949:2017)

HZN/TO E500, Elektromagnetska kompatibilnost u elektrotehnici i telekomunikacijama

HRNEN55016-1-4:2012/A2:2017en prSpecifikacija uređaja i metoda za mjerenja radiosmetnjai otpornosti – Dio 1-4: Uređaji za mjerenje radiosmetnjai otpornosti – Antene i ispitna mjesta za mjerenje zračenih smetnja (CISPR 16-1-4:2010/A2:2017; EN55016-1-4:2010/A2:2017)Specification for radiodisturbanceand immunitymeasuringapparatus and methods – Part 1-4: Radio disturbanceand immunity measuring apparatus – Antennas and test sites for radiated disturbance measurements (CISPR16-1-4:2010/A2:2017;EN55016-1-4:2010/A2:2017)

HRNEN61000-4-39:2017en prElektromagnetska kompatibilnost (EMC) – Dio 4-39:Ispitne i mjerne tehnike – Zračeća polja u neposrednojblizini – Ispitivanje otpornosti (IEC 61000-4-39:2017; EN61000-4-39:2017)Electromagnetic Compatibility (EMC) – Part 4-39: Testingand measurement techniques – Radiated fields inclose proximity – Immunity test (IEC 61000-4-39:2017; EN61000-4-39:2017)

HZN/TO E501, Elektroakustika i ultrazvuk

HRNEN62127-2:2008/A2:2017en prUltrazvuk –Hidrofoni – 2. dio:Umjeravanje za ultrazvučnapolja do 40 MHz (IEC 62127-2:2007/am2:2017; EN62127-2:2007/A2:2017)Ultrasonics – Hydrophones – Part 2: Calibration forultrasonicfieldsupto40MHz(IEC62127-2:2007/am2:2017; EN62127-2:2007/A2:2017)

HZN/TO T4, Normizacija u telekomunikacijama

HRNEN300224V2.1.1:2017en prKopnena pokretna služba – Radijska oprema za uporabuu jednosmjernom pozivanju koja radi u frekvencijskompodručju 25 MHz - 470 MHz – Harmonizirana norma kojaobuhvaćabitnezahtjeveizčlanka3.2Direktive2014/53/EU (EN300224V2.1.1:2017)Land Mobile Service – Radio Equipment for use in aPaging Service operating within the frequency range �5 MHz - 470 MHz – Harmonised Standard covering the essentialrequirementsofarticle3.2ofDirective2014/53/EU(EN300224V2.1.1:2017)

HRNEN301357V2.1.1:2017en prBežičniaudiouređajiupodručjuod25MHzdo2000MHz – Harmonizirana norma koja obuhvaća bitne zahtjeve izčlanka3.2Direktive2014/53/EU(EN301357V2.1.1:2017)Cordless audio devices in the range �5 MHz to � 000 MHz – Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU (EN301357V2.1.1:2017)

HRNEN302296V2.1.1:2017en prDigitalnizemaljskiTVodašiljači–Harmonizirananormakojaobuhvaćabitnezahtjeveizčlanka3.2Direktive2014/53/EU(EN302296V2.1.1:2017)Digital Terrestrial TV Transmitters – Harmonised Standard covering the essential requirements of article 3.2 of Directive2014/53/EU(EN302296V2.1.1:2017)

HRNEN303413V1.1.1:2017en prSatelitske zemaljske postaje i sustavi (SES) – Prijamnici globalnoga satelitskog navigacijskog sustava (GNSS)– Radijska oprema koja radi u frekvencijskim pojasima od 1 164 MHz do 1 300 MHz i od 1 559 MHz do 1 610 MHz – Harmonizirana norma koja obuhvaća bitne zahtjeve izčlanka3.2Direktive2014/53/EU(EN303413V1.1.1:2017)SatelliteEarthStationsandSystems(SES);GlobalNavigationSatellite System (GNSS) receivers – Radio equipmentoperating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands – Harmonised Standardcovering the essential requirements of article 3.2 of Directive2014/53/EU(EN303413V1.1.1:2017)

HZN/TU I2, Strojarstvo 2

HRNEN15163:2017en prStrojeviiuređajizaiskorištavanjeiobraduprirodnogkamena–Sigurnosnizahtjevizapile(EN15163:2017)Machinesandinstallationsfortheexploitationandprocessingofnatural stone–Safety–Requirements fordiamondwiresaws(EN15163:2017)

HZN/TU N1, Nemetalni materijali 1

HRNEN16723-2:2017en prNatural gas and biomethane for use in transport andbiomethaneforinjectioninthenaturalgasnetwork–Part2:Automotivefuelspecifications(EN16723-2:2017)

HZN/TU S1, Zdravlje, okoliš i medicinska oprema 1

HRNENISO11609:2017en prStomatologija – Zubne paste – Zahtjevi, metode ispitivanja i označivanje(ISO11609:2017;ENISO11609:2017)Dentistry – Dentifrices – Requirements, test methods andmarking(ISO11609:2017;ENISO11609:2017)

HRNEN16844:2017en prEstetske medicinske usluge – Nekirurški medicinski postupci (EN16844:2017)Aesthetic medicine services – Non-surgical medical procedures(EN16844:2017)

HRNENISO19490:2017en prStomatologija – Instrument za podizanje membrane sinusa (ISO19490:2017;ENISO19490:2017)Dentistry – Sinus membrane elevator (ISO 19490:2017; ENISO19490:2017)

HZN/TU T1, Prijevoz, rukovanje materijalima i pakiranje 1

HRNEN2714-013:2017en prZrakoplovstvo – Kabeli, električni, jednožilni i višežilniza opću upotrebu – Radna temperatura između -55 °C i 260 °C – Dio 013: DR porodica, oklopljeni (spiralni) iobloženi,zaispisUVlaserskimpisačem–Normazaproizvod (EN2714-013:2017)Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between -55°Cand260°C–Part013:DRfamily,screened(spiral)and jacketed, UV laser printable – Product standard (EN2714-013:2017)

HRNEN2997-001:2017en prZrakoplovstvo – Spojnice, električne, kružne, opremljene snavojnim prstenom, otporne na vatru ili neotporne na vatru, radne temperature -65 °C do 175 °C neprekidno, 200 °Cneprekidno,260°Cvršno–001.dio:Tehničkaspecifikacija(EN2997-001:2017)Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant,operatingtemperatures-65°Cto175°Ccontinuous,200°Ccontinuous,260°Cpeak–Part001:Technicalspecification (EN2997-001:2017)

HRNEN3773-006:2017en prZrakoplovstvo – Automatski osigurači, jednopolni,temperaturno kompenzirani, nazivnih struja 1 A do �5 A – Dio 006: Ravni priključak 6,3 mm – Norma za proizvod (EN3773-006:2017)Aerospace series – Circuit breakers, single-pole, temperature compensated,ratedcurrents1Ato25A–Part006:6,3mmbladeterminal–Productstandard(EN3773-006:2017)


HRNEN4072:2016/Ispr.2:2017en prZrakoplovstvo – Vijci, sa 100° upuštenom normalnomglavom, s ujednačenim križnim urezom, normalnog strukausketolerancije,kratkognavoja,odleguretitana,prevučeniIVD aluminijem – Klasifikacija: 1100 MPa (pri temperaturi okoline)/425°C(EN4072:2016/AC:2017)Aerospace series – Screws, 100° countersunk normalhead, offset cruciform recess, close tolerance shank,short thread in titanium alloy, aluminium IVD coated –Classification:1100MPa(atambienttemperature)/425°C (EN4072:2016/AC:2017)

HRNEN4674-003:2017en prZrakoplovstvo–Električnikabeli,ugradnja–Samoomatajuća,oklopljena(EMI)zaštitnanavlaka–Dio003:Otvorenanavlaka–Unutarnjepodručjepodkontroliranimtlakom–EMIzaštita5kA–Temperaturnirasponod-65°Cdo200°C–Normazaproizvod(EN4674-003:2017)Aerospace series – Electrical cables, installation – Self-wrappingshielding(EMI)protectivesleeve–Part003:Opensleeve – Inside pressurized area – EMI protection 5 kA –Temperature range -65 °C to 200 °C–Product standard (EN4674-003:2017)

HRNEN4804:2017en prZrakoplovstvo –Prirubnički spojevi – Zakretna prirubnica s4otvorazapričvršćivanje,odlegurenikla–Nizoviuinčima(EN4804:2017)Aerospaceseries–Flangecouplings–Swivelflangewith4fasteningholes,innickelalloy–Inchseries(EN4804:2017)

HRNEN4805:2017en prZrakoplovstvo – Prirubnički spojevi – Spoj za zavarivanje,ravni, od čelika otpornog na toplinu – Nizovi u inčima (EN4805:2017)Aerospace series – Flange couplings – Weld coupling, Straight,inheatresistingsteel–Inchseries(EN4805:2017)

HRNEN4806:2017en prZrakoplovstvo – Prirubnički spojevi – Spoj za zavarivanje,ravni,odlegurenikla–Nizoviuinčima(EN4806:2017)Aerospace series – Flange couplings – Weld coupling, Straight,innickelalloy–Inchseries(EN4806:2017)

HRNEN4809:2017en prZrakoplovstvo–Prirubničkispojevi–Brtvasfluorougljičnombrtvom na aluminijskoj ploči s 3 otvora za pričvršćivanje–Nizoviuinčima(EN4809:2017)Aerospace series – Flange couplings – Gasket seal withfluorocarbonsealonaluminiumplatewith3fasteningholes–Inchseries(EN4809:2017)

HRNEN16603-50-15:2017en prSvemirsko inženjerstvo–CANprotokolproširenjasabirnice(EN16603-50-15:2017)Space engineering – CANbus extention protocol (EN16603-50-15:2017)

HZN/TU U1, Opća elektrotehnika 1

HRNEN60068-2-18:2017en prIspitivanje pri utjecaju okoliša – Dio 2-18: Ispitivanja– Ispitivanje R i naputak: Voda (IEC 60068-2-18:2017; EN60068-2-18:2017)Environmental testing – Part 2-18: Tests – Tests R andguidance:Water(IEC60068-2-18:2017;EN60068-2-18:2017)

HRNEN60664-3:2017en prKoordinacija izolacije za opremu niskonaponskih sustava –3.dio:Zaštitaodzagađenjaoblaganjem te stavljanjemukućišteilikalup(IEC60664-3:2016;EN60664-3:2017)Insulation coordination for equipment within low-voltagesystems – Part 3: Use of coating, potting or mouldingfor protection against pollution (IEC 60664-3:2016; EN60664-3:2017)

HRNEN60695-11-5:2017en prIspitivanjeopasnostiodpožara–Dio11-5:Ispitniplamenovi – Metoda ispitivanja s igličastim plamenom – Uređaj, postupak ispitivanja za potvrđivanje i upute (IEC60695-11-5:2016;EN60695-11-5:2017)Firehazard testing–Part11-5:Test flames–Needle-flametestmethod–Apparatus,confirmatorytestarrangementandguidance(IEC60695-11-5:2016;EN60695-11-5:2017)

HRNEN62321-7-2:2017en prUtvrđivanje određenih supstanci u elektrotehničkimproizvodima–Dio7-2:Šesterovalentnikrom–Određivanješesterovalentnog kroma (Cr(VI)) u polimerima i elektronici kolorimetrijskom metodom (IEC 62321-7-2:2017; EN62321-7-2:2017)Determination of certain substances in electrotechnicalproducts–Part 7-2:Hexavalent chromium–Determination ofhexavalentchromium(Cr(VI))inpolymersandelectronicsby the colorimetric method (IEC 62321-7-2:2017; EN62321-7-2:2017)

HZN/TU V1, Elektronika 1

HRNEN60068-2-69:2017en prEnvironmental testing – Part 2-69: Tests – Test Te/Tc:Solderability testing of electronic components and printedboards by the wetting balance (force measurement) method(IEC60068-2-69:2017;EN60068-2-69:2017)

HRNEN60749-3:2017en prSemiconductor devices – Mechanical and climatic test methods – Part 3: External visual examination (IEC60749-3:2017;EN60749-3:2017)

HRNEN60749-4:2017en prSemiconductor devices – Mechanical and climatic test methods–Part4:Dampheat,steadystate,highlyacceleratedstresstest(HAST)(IEC60749-4:2017;EN60749-4:2017)

HRNEN60749-6:2017en prSemiconductor devices – Mechanical and climatic test methods – Part 6: Storage at high temperature (IEC60749-6:2017;EN60749-6:2017)

HRNEN60749-9:2017en prSemiconductor devices – Mechanical and climatic test methods – Part 9: Permanence of marking (IEC60749-9:2017;EN60749-9:2017)

HRNEN60749-28:2017en prSemiconductor devices – Mechanical and climatic test methods–Part28:Electrostaticdischarge(ESD)sensitivitytesting – Charged device model (CDM) – device level (IEC60749-28:2017;EN60749-28:2017)

HRNEN61076-2-113:2017en prConnectorsforelectronicequipment–Productrequirements– Part 2-113: Circular connectors – Detail specification forconnectors with M12 screw locking with power and signalcontactsfordatatransmissionwithfrequencyupto100MHz(IEC61076-2-113:2017;EN61076-2-113:2017)

HRNEN61169-11:2017en prRadio-frequencyconnectors–Part11:SectionalspecificationforRFcoaxialconnectorswithinnerdiameterofouterconductor9,5 mm with threaded coupling – Characteristic impedance 50Ω(type4,1-9,5)(IEC61169-11:2017;EN61169-11:2017)

HRNEN61188-7:2017en prPrinted boards and printed board assemblies – Design and use–Part7:ElectroniccomponentzeroorientationforCADlibraryconstruction(IEC61188-7:2017;EN61188-7:2017)

HRNEN61291-5-2:2017en prOptical amplifiers – Part 5-2: Qualification specifications – Reliability qualification for optical fibre amplifiers (IEC61291-5-2:2017;EN61291-5-2:2017)

HRNEN61300-2-55:2017en prFibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-55:Tests–Strengthofmountedadaptor(IEC61300-2-55:2017; EN61300-2-55:2017)

HRNEN62433-3:2017en prEMCICmodelling–Part3:ModelsofIntegratedCircuitsforEMI behavioural simulation – Radiated emissions modelling (ICEM-RE)(IEC62433-3:2017;EN62433-3:2017)

HZN/TU W1, Energetska elektrotehnika 1

HRNEN61951-2:2017en prSekundarni članci i baterije koje sadrže alkalne ili drugenekiseleelektrolite–Prijenosnizapečaćenisekundarničlancii baterije – 2. dio: Nikal-metalni hidrid (IEC 61951-2:2017; EN61951-2:2017)Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary sealed cells and batteries for portable applications – Part 2: Nickel-metal hydride (IEC61951-2:2017;EN61951-2:2017)


HRNEN62282-4-102:2017en prTehnologija gorivih članaka – dio 1-102: Sustavi gorivihčlanaka za napajanje električnih industrijskih vozila– Metode za ispitivanje značajki (IEC 62282-4-102:2017; EN62282-4-102:2017)Fuelcelltechnologies–Part4-102:Fuelcellpowersystemsfor industrial electric trucks – Performance test methods (IEC62282-4-102:2017;EN62282-4-102:2017)

HRNEN62841-2-10:2017en prRučni elektromotorni alati, prijenosni alati i mehanizacijaza travnjake i vrtove – Sigurnost – Dio 2-10: Posebnizahtjevi za ručne mješalice (IEC 62841-2-10:2017; EN62841-2-10:2017)Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-10: Particular requirements for hand-held mixers (IEC62841-2-10:2017;EN62841-2-10:2017)

HRNEN62841-3-13:2017en prRučni elektromotorni alati, prijenosni alati i mehanizacijaza travnjake i vrtove – Sigurnost – Dio 3-13: Posebnizahtjevi za prijenosne bušilice (IEC 62841-3-13:2017; EN62841-3-13:2017)Electric motor-operated hand-held tools, transportable toolsandlawnandgardenmachinery–Safety–Part3-13: Particular requirements for transportable drills (IEC62841-3-13:2017;EN62841-3-13:2017)

1.3Prijedlozizaprihvaćanjestranihnorma u izvorniku

Temeljem Zakona o normizaciji (Narodne novine 80/�013) Hrvatski zavodzanormenaprijedlogtehničkihodboraobjavljujeraspravuoprijedloguzaprihvaćanjestranihnorma(međunarodnih,europskihinjemačkihnorma)kaohrvatskihnorma.Pisane primjedbe na prijedloge za prihvaćanje norma dostavljajuse Hrvatskome zavodu za norme (uz naznaku tehničkog odborai referencijsku oznaku norme) u roku od 30 dana od dana objaverasprave u službenom glasilu Hrvatskoga zavoda za norme (HZN e-glasilo).

HZN/TO 6, Papir, karton i pulpe

prEN 1�498 enPaper and board – Paper and board intended to come into contactwithfoodstuffs–Determinationofcadmium,chromiumandleadinanaqueousextractPapir i karton – Papir i karton koji dolazi u kontakt s prehrambenimproizvodima–Određivanjekadmija iolovauvodenom ekstraktu

HZN/TO 21, Protupožarna i vatrogasna oprema

prEN 1497�-1 enFixed firefighting systems – Water mist systems – Part 1:Design, installation, inspection and maintenanceStabilni protupožarni sustavi – Sustavi vodene magle – Projektiranje i ugradnja

HZN/TO 25, Ljevarstvo

prEN 156� enFounding – Malleable cast ironsLjevarstvo – Temperni lijevovi

HZN/TO 28, Naftni proizvodi i maziva

prEN ISO 39�4 enPetroleumproducts–Determinationofboilingrangedistribution–Gaschromatographymethod(ISO/DIS3924:2017)Naftniproizvodi–Određivanjepodručjadestilacije–Metodaplinskekromatografije(ISO/DIS3924:2017)

prEN ISO 4�64 enPetroleum products – Calculation of cetane index ofmiddle-distillate fuels by the four variable equation (ISO/DIS4264:2017)Naftni proizvodi – Izračunavanje cetanskog indeksa zasrednjedestilatnagorivapomoćujednadžbesčetiriveličine(ISO/DIS4264:2017)

ISO8216-1:2017enPetroleumproducts–Fuels(classF)classification–Part1:CategoriesofmarinefuelsNaftni proizvodi – Razredba goriva (razred F) – 1. dio:Kategorijebrodskihgoriva

ISO8216-99:2002enPetroleumproducts–Fuels(classF)–Classification–Part99: GeneralNaftniproizvodi–Goriva(razredF)–Klasifikacija–99.dio:Općenito

ISO8217:2017enPetroleum products – Fuels (class F) – Specifications ofmarinefuelsNaftniproizvodi–Goriva(razredF)–Specifikacijebrodskihgoriva

prEN 1�916 enPetroleumproducts–Determinationofaromatichydrocarbontypes in middle distillates – High performance liquidchromatographymethodwithrefractiveindexdetectionNaftniproizvodi–Određivanjetipovaaromatskihugljikovodikau srednjim destilatima – Metoda tekućinske kromatografijevisokogučinkasdetektoromindeksaloma

HZN/TO 34, Poljoprivredni i prehrambeni proizvodi

ISO2256:1984/DAmd1enDried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridisLinnaeus)–SpecificationSušena metvica (zelena) (Mentha spicata Linnaeus syn. MenthaviridisLinnaeus)–Specifikacija

ISO/DIS ��9� enCocoa beans – SamplingKakaozrno–Uzimanjeuzoraka

ISO/DIS �451 enCocoabeans–Specificationandqualityrequirements

HZN/TO 43, Akustika

ISO1996-2:2017enAcoustics – Description, measurement and assessment ofenvironmentalnoise–Part2:Determinationofenvironmentalnoise levelsAkustika–Opis,mjerenjeiocjenjivanjebukeokoliša–2.dio:Određivanjerazinabukeokoliša


prEN 1011-6 enWelding–Recommendationforweldingofmetallicmaterials–Part6:LaserbeamweldingZavarivanje – Preporuka za zavarivanje metalnih materijala –6.dio:Zavarivanjelaserom

HZN/TO 92, Zaštita od požara

prEN ISO 1716 enReactiontofiretestsforproducts–Determinationofthegrossheatofcombustion(calorificvalue)(ISO/DIS1716:2017)Ispitivanja reakcije na požar proizvoda – Određivanjebruto toplinskog potencijala (kalorična vrijednost) (ISO/DIS1716:2017)

HZN/TO 120, Koža i obuća

prEN ISO �370�-1 enLeather –Organic fluorine – Part 1: Determination of non-volatile compounds by extraction method using liquidchromatography(ISO/DIS23702-1:2017)

HZN/TO 126, Duhan i duhanski proizvodi

ISO13276:2017enTobacco and tobacco products – Determination of nicotinepurity–GravimetricmethodusingtungstosilicicacidDuhan i duhanski proizvodi – Određivanje čistoće nikotina–Gravimetrijskametodauporabomsilikovolframovekiseline

ISO15152:2003/DAmd2enTobacco–Determinationofthecontentoftotalalkaloidsasnicotine–Continuous-flowanalysismethodDuhan–Određivanjeudjela ukupnihalkaloida kaonikotina– Metoda analize kontinuirnog toka


HZN/TO 130, Grafička tehnologija

ISO2834-3:2008enGraphic technology – Laboratory preparation of test prints–Part3:ScreenprintinginksGrafičkatehnologija–Laboratorijskapripremaprobnihotisaka–3.dio:Sitotiskarskeboje

ISO12632:2015enGraphictechnology–Ink,paperandlabels–Requirementson hot alkali penetration and resistanceGrafička tehnologija – Bojilo, papir i etikete – Zahtjevi zapenetracijutoplelužineiotpornostnalužinu

ISO12637-2:2008enGraphictechnology–Vocabulary–Part2:PrepresstermsGrafičkatehnologija–Terminološkirječnik–2.dio:Naziviugrafičkojpripremi

ISO12637-4:2008enGraphictechnology–Vocabulary–Part4:PostpresstermsGrafičkatehnologija–Terminološkirječnik–4.dio:Naziviugrafičkojdoradi

ISO12640-3:2007enGraphic technology – Prepress digital data exchange – Part 3: CIELAB standard colour image data (CIELAB/SCID)Grafička tehnologija – Razmjena digitalnih podataka ugrafičkoj pripremi – 3. dio: CIELAB standardni podaci zakolornusliku(CIELAB/SCID)

ISO12640-4:2011enGraphic technology – Prepress digital data exchange –Part4:Widegamutdisplay-referredstandardcolourimagedata[AdobeRGB(1998)/SCID]Grafička tehnologija – Razmjena digitalnih podataka ugrafičkoj pripremi – 4. dio: Prikazivanje veličine gamutaodređenog standardnim podacima za kolornu sliku [AdobeRGB(1998)/SCID]

ISO12640-5:2013enGraphictechnology–Prepressdigitaldataexchange–Part5: Scene-referredstandardcolourimagedata(RIMM/SCID)Grafička tehnologija – Razmjena digitalnih podataka ugrafičkojpripremi–5.dio:Standardnipodacizakolornuslikuodređenimotivom(RIMM/SCID)

ISO12641-1:2016enGraphictechnology–Prepressdigitaldataexchange–Colourtargetsforinputscannercalibration–Part1:ColourtargetsforinputscannercalibrationGrafička tehnologija – Razmjena digitalnih podataka ugrafičkojpripremi–Kolornatestnapoljazaulaznukalibracijuskenera–1.dio:Kolorna testnapolja zaulaznukalibracijuskenera

ISO12643-5:2010enGraphic technology – Safety requirements for graphictechnology equipment and systems – Part 5: Stand-aloneplaten pressesGrafičkatehnologija–Sigurnosnizahtjevizagrafičkuopremuisustave–5.dio:Samostalnizaklopnistrojevi

ISO12647-7:2016enGraphic technology –Process control for the production ofhalftone colour separations, proof and production prints – Part 7: Proofing processes working directly from digitaldataGrafička tehnologija – Kontrola postupaka za proizvodnjurasterskih izvadaka, probnog i proizvodnog otiska – 7. dio:Probno otiskivanje direktno iz digitaliziranih podataka

ISO12647-8:2012enGraphic technology –Process control for the production ofhalf-tone colour separations, proof and production prints – Part 8: Validation print processes working directly fromdigital dataGrafička tehnologija – Kontrola postupaka za proizvodnjurasterskih izvadaka, probnog i proizvodnog otiska – 8. dio:Provjera tiskarskog procesa nastalog direktno iz digitaliziranih podataka

ISO14298:2013enGraphic technology – Management of security printingprocessesGrafičkatehnologija–Upravljanjeprocesimazaštitnogtiska

ISO14861:2015enGraphic technology–Requirements forcoloursoftproofingsystemsGrafičkatehnologija–Zahtjevisustavazavišebojnoprobnootiskivanje(softproof)

ISO15076-1:2010enImagetechnologycolourmanagement–Architecture,profileformatanddatastructure–Part1:BasedonICC.1:2010Tehnologijakolornogupravljanjaslike–Ustroj,formatprofilaistrukturapodataka–1.dio:NatemeljuICC.1:2010

ISO15341:2014enGraphic technology – Method for radius determination ofprinting cylindersGrafička tehnologija – Metoda određivanja polumjeratiskovnog cilindra

ISO15397:2014enGraphic technology – Communication of graphic paperpropertiesGrafičkatehnologija–Navođenjesvojstavagrafičkihpapira

ISO15930-7:2010enGraphic technology – Prepress digital data exchangeusing PDF – Part 7: Complete exchange of printing data (PDF/X-4)andpartialexchangeofprintingdatawithexternalprofilereference(PDF/X-4p)usingPDF1.6Grafička tehnologija – Razmjena digitalnih podataka ugrafičkojpripremipomoćuPDF-a–7.dio:Potpunarazmjenatiskarskihpodataka(PDF/X-4)idjelomičnarazmjenadigitalnihpodataka s vanjskim podacima profila (PDF/X-4p) pomoćuPDF 1.6

ISO15930-8:2010+Cor1:2011enGraphic technology – Prepress digital data exchangeusingPDF–Part8:Partialexchangeofprintingdatausing PDF1.6(PDF/X-5)Grafička tehnologija – Razmjena digitalnih podataka ugrafičkoj pripremi pomoću PDF-a – 8. dio: DjelomičnarazmjenadigitalnihpodatakapomoćuPDF1.6(PDF/X-5)

ISO16612-2:2010enGraphictechnology–Variabledataexchange–Part2:UsingPDF/X-4andPDF/X-5(PDF/VT-1andPDF/VT-2)Grafička tehnologija – Razmjena promjenljivih podatakadigitalnog tiska – 2 dio: Korištenje PDF/X-4 i PDF/X-5 (PDF/VT-1 i PDF/VT-�)

ISO16684-1:2012enGraphic technology – Extensible metadata platform (XMP)specification – Part 1: Data model, serialization and corepropertiesGrafička tehnologija – Specifikacija proširive platformemetapodataka(XMP)–1.dio:Modelpodataka,serijalizacijai temeljna svojstava

ISO16684-2:2014enGraphic technology – Extensible metadata platform (XMP)–Part2:DescriptionofXMPschemasusingRELAXNGGrafička tehnologija – Specifikacija proširive platformemetapodataka (XMP) – 2. dio: Opis XMP shema pomoćuRELAXNG

ISO16759:2013enGraphic technology–Quantificationandcommunication forcalculatingthecarbonfootprintofprintmediaproductsGrafička tehnologija – Kvantifikacija i komunikacija priizračunavanjuemisijestakleničkihplinova(ugljičniotisak)zaproizvode tiskanih medija

ISO16760:2014enGraphictechnology–Prepressdataexchange–PreparationandvisualizationofRGB images tobeused inRGB-basedgraphicsartsworkflowsGrafička tehnologija – Razmjena digitalnih podataka ugrafičkoj pripremi – Priprema i vizualizacijaRGB slika kojese upotrebljavaju u radnim tokovima (workflow) grafičkihilustracijatemeljenimnaRGB--u

ISO16762:2016enGraphictechnology–Post-press–Generalrequirementsfortransfer,handlingandstorageGrafička tehnologija – Grafička dorada – Opći zahtjevi zaprijenos, rukovanje i skladištenje

ISO16763:2016enGraphictechnology–Post-press–RequirementsforboundproductsGrafičkatehnologija–Grafičkadorada–Zahtjevizauvezaneproizvode

A1� HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije

ISO17972-1:2015enGraphictechnology–Colourdataexchangeformat–Part1:RelationshiptoCxF3(CxF/X)Grafička tehnologija – Format razmjene kolornih podataka–1.dio:OdnospremaCxF3(CxF/X)

ISO17972-2:2016enGraphictechnology–Colourdataexchangeformat(CxF/X)–Part2:Scannertargetdata(CxF/X-2)Grafička tehnologija – Format razmjene kolornih podataka(CxF/X)–2.dio:Ciljanipodacizaskener(CxF/X-2)

ISO18619:2015enImage technology colour management – Black pointcompensationTehnologija kolornog upravljanja slike – Kompenzacijaakromatsketočke(Blackpoint)

ISO18620:2016enGraphic technology – Prepress data exchange – ToneadjustmentcurvesexchangeGrafičkatehnologija–Razmjenadigitalnihpodatakaugrafičkojpripremi – Razmjena krivulja za podešavanje tonova

ISO19445:2016enGraphic technology – Metadata for graphic arts workflow–XMPmetadataforimageanddocumentproofingGrafičkatehnologija–Metapodacizaradnetokove(workflow)grafičkihilustracija–XMPmetapodacizaslikeiprobneotiskedokumenata

ISO19594:2017enGraphictechnology–Testmethodforthedeterminationofthebindingstrengthforperfect-boundproducts–Page-pull testworkingupwardsGrafička tehnologija – Metoda ispitivanja za određivanječvrstoće mekog uveza – Ispitivanje povlačenjem straniceprema gore

ISO28178:2009enGraphictechnology–ExchangeformatforcolourandprocesscontroldatausingXMLorASCIItextGrafičkatehnologija–FormatrazmjenekontrolnihpodatakabojaiprocesakorištenjemXMLiliASCIIteksta

HZN/TO 134, Gnojiva i poboljšivači tla

ISO/DIS 7409 enFertilizers – Marking – Presentation and declarationsGnojiva–Označivanje–Predstavljanjeideklariranje

HZN/TO 138, Plastične cijevi, spojnice i ventili za prijenos tekućina

prEN ISO 13056 en Plastics piping systems – Pressure systems for hot andcold water – Test method for leaktightness under vacuum (ISO13056:2011)

ENISO15874-2:2013/prA1enPlastics piping systems for hot and cold waterinstallations – Polypropylene (PP) – Part 2: Pipes (ISO15874-2:2013/DAM1:2017)Plastični cijevni sustavi za instalacije s toplom ihladnom vodom – Polipropilen (PP) – 2. dio: Cijevi (ISO15874-2:2013/DAM1:2017)

ENISO15874-3:2013/prA1enPlastics piping systems for hot and cold waterinstallations – Polypropylene (PP) – Part 3: Fittings (ISO15874-3:2013/DAM1:2017)Plastični cijevni sustavi za instalacije s toplom ihladnom vodom – Polipropilen (PP) – 3. dio: Spojnice (ISO15874-3:2013/DAM1:2017)

ENISO15874-5:2013/prA1enPlastics piping systems for hot and coldwater installations– Polypropylene (PP) – Part 5: Fitness for purpose of thesystem(ISO15874-5:2013/DAM1:2017)Plastični cijevni sustavi za instalacije s toplom i hladnomvodom–Polipropilen (PP)– 5. dio:Prikladnost sustava zauporabu(ISO15874-5:2013/DAM1:2017)

prEN ISO 1989� enPlastics piping systems–Thermoplastics pipes and fittingsfor hot and coldwater –Testmethod for the resistance ofjointstopressurecycling(ISO19892:2011)

prEN ISO 19893 enPlasticspipingsystems–Thermoplasticspipesandfittingsforhotandcoldwater–Testmethodfortheresistanceofmountedassembliestotemperaturecycling(ISO19893:2011)Plastični cijevni sustavi – Plastomerne cijevi i spojniceza toplu i hladnu vodu – Ispitna metoda za postojanost montiranihsklopovapremacikličkimpromjenamatemperature (ISO19893:2011)

prEN ISO �1��5-1 enPlastics piping systems for the trenchless replacementof underground pipeline networks – Part 1: Replacementon the line by pipe bursting and pipe extraction (ISO/DIS21225-1:2017)

prEN ISO �1��5-� enPlastics piping systems for the trenchless replacement ofunderground pipeline networks – Part 2: Replacement offthe line by horizontal directional drilling and impact moling (ISO/DIS21225-2:2017)

HZN/TO 146, Kvaliteta zraka

FprCEN ISO/TS �16�3 enWorkplace exposure –Assessment of dermal exposure tonano-objects and their aggregates and agglomerates (NOAA) (ISO/PRFTS21623:2017)Profesionalna izloženost – Procjena izloženosti koženanoobjektima i njihovim agregatima i aglomeratima (NOAA) (ISO/PRFTS21623:2017)

HZN/TO 147, Kvaliteta vode

prEN 17136 enWaterquality–Guidanceonfieldandlaboratoryproceduresforquantitativeanalysisandidentificationofmacro-invertebratesfrominlandsurfacewaters

HZN/TO 159, Ergonomija

prEN ISO �7501 enThe human-centred organization –Guidance formanagers(ISO/DIS27501:2017)Organizacija usmjerena prema čovjeku – Smjernica zamenadžere(ISO/DIS27501:2017)

HZN/TO 163, Toplinska izolacija

prEN 13494 enThermal insulation products for building applications –DeterminationofthetensilebondstrengthoftheadhesiveandofthebasecoattothethermalinsulationmaterialToplinsko-izolacijski proizvodi za primjenu u zgradarstvu –Određivanjevlačnečvrstoćeprionljivostiljepilaitemeljnogsloja na toplinsko-izolacijskom materijalu

prEN 13497 enThermal insulation products for building applications – Determination of the resistance to impact of external thermal insulation composite systems (ETICS)Toplinsko-izolacijski proizvodi za primjenu u zgradarstvu – Određivanje otpornosti na udar povezanih sustava zavanjsku toplinsku izolaciju (ETICS)

prEN 17139 enThermal insulation products for building – Factory madevegetalfibresbasedproducts(VFBP)Toplinsko-izolacijski proizvodi za zgrade – Tvorničkiproizvedeniproizvodinaosnovibiljnihvlakana(VFBP)

HZN/TO 165, Drvene konstrukcije

prEN 1459� enTimberstructures–Dowel-typefasteners–RequirementsDrvene konstrukcije – Štapasta spajala – Zahtjevi

HZN/TO 172, Optika i optički instrumenti

prEN ISO 11145 enOptics and photonics – Lasers and laser-related equipment –Vocabularyandsymbols(ISO/DIS11145:2017)Optikaifotonika–Laseriipridruženaoprema–Terminološkirječnikisimboli(ISO/DIS11145:2017)

prEN ISO 13694 enOptics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) densitydistributionOptikaifotonika–Laseriipridruženaoprema–Ispitnemetodezaraspodjelugustoćesnage(energije)laserskogsnopa


HZN/TO 182, Geotehničke konstrukcije

prEN ISO ��477-1 enGeotechnical investigation and testing – Testing ofgeotechnicalstructures–Part1:Pileloadtestbystaticaxiallyloadedcompression(ISO/DIS22477-1:2017)Geotehničkoistraživanjeiispitivanje–Ispitivanjegeotehničkihkonstrukcija – 1. dio: Ispitivanje nosivosti pilota statičkimtlačnimosnimopterećenjem(ISO/DIS22477-1:2017)

HZN/TO 207, Upravljanje okolišem

prEN ISO 14064-1 enGreenhouse gases – Part 1: Specification withguidance at the organization level for quantification andreporting of greenhouse gas emissions and removals (ISO/DIS14064-1:2017)Stakleničkiplinovi–1.dio:Specifikacijasasmjernicamanaraziniorganizacijezakvantificiranjeiizvješćivanjeoemisijamaiuklanjanjustakleničkihplinova(ISO/DIS14064-1:2017)

prEN ISO 14064-� enGreenhouse gases – Part 2: Specification with guidanceat the project level for quantification, monitoring andreportingofgreenhousegasemissionreductionsorremovalenhancements(ISO/DIS14064-2:2017)Staklenički plinovi – 2. dio: Specifikacija sa smjernicamana razini projekta zakvantificiranje,praćenje i izvješćivanjeo smanjivanju emisija ili povećanju uklanjanja stakleničkihplinova(ISO/DIS14064-2:2017)

HZN/TO 215, Medicinska informatika

prEN ISO 11�38 enHealth informatics – Identification of medicinal products –Dataelementsandstructures for theunique identificationand exchange of regulated information on substances (ISO/DIS11238:2017)Medicinskainformatika–Identifikacijamedicinskihproizvoda–Podaci i strukture za jedinstvenu identifikaciju i razmjenupropisanihinformacijaosastojcima(ISO/DIS11238:2017)


prEN 1�104 enResilientfloorcoverings–Corkfloortiles–SpecificationElastične podne obloge – Plutene podne ploče –Specifikacija

prEN 1714� enModularmultilayer floor coverings –Elementswith awoodpowder based surface layer – Specifications, requirementsand test methods

prEN ISO �3999 enResilientfloorcoverings–Determinationofdimensionalstabilityand curling after exposure to heat (ISO/DIS 23999:2017) Elastičnepodneobloge–Određivanjedimenzijskestabilnostiivalovitostinakonizlaganjatoplini(ISO/DIS23999:2017)

HZN/TO 502, Plinski uređaji

EN203-2-1:2014/prA1enGas heated catering equipment – Part 2-1: Specificrequirements–OpenburnersandwokburnersPlinskiuređajizaprofesionalnekuhinje–Dio2-1:Specifičnizahtjevi–Otvoreniplameniciiwokplamenici


prEN 10�64-� enSteelwireandwireproducts–Steelwireforropes–Part2: Cold drawn non alloy steel wire for ropes for generalapplicationsČeličnažicaižičaniproizvodi–Čeličnažicazaužad–2.dio: Hladno vučena nelegirana čelična žica za užad općenamjene


prEN ISO 6158 enMetallic and other inorganic coatings – Electrodeposited coatings of chromium for engineering purposes (ISO/DIS6158:2017)Metalne prevlake – Elektrokemijske kromatne prevlake za inženjerskenamjene(ISO/DIS6158:2017)

HZN/TO 505, Prijenos i distribucija plina

prEN 15001-1 enGasInfrastructure–Gasinstallationpipeworkwithanoperatingpressure greater than 0,5 bar for industrial installations andgreaterthan5barforindustrialandnon-industrialinstallations–Part1:Detailedfunctionalrequirementsfordesign,materials,construction, inspection and testingPlinska infrastruktura–Plinske instalacijeza radni tlakvećiod0,5barza industrijske instalacije i za tlakvećiod5barza industrijske i neindustrijske instalacije – 1. dio: Detaljnifunkcionalnizahtjevizaprojektiranje,materijale,konstrukciju,nadzor i ispitivanje

prEN 15001-� enGas supply systems – Gas installation pipework withan operating pressure greater than 0,5 bar for industrialinstallations and greater than 5 bar for industrial andnon-industrial installations – Part 2: Detailed functionalrequirementsforcommissioning;operationandmaintenancePlinska infrastruktura–Plinske instalacijeza radni tlakvećiod0,5barza industrijske instalacije i za tlakvećiod5barza industrijske i neindustrijske instalacije – 2. dio: Detaljnifunkcionalnizahtjevizaprobniradiodržavanje


prEN ISO �03�1 enPetroleum,petrochemicalandnaturalgasindustries–Safetyofmachineries–Poweredelevators(ISO/DIS20321:2017)

HZN/TO 513, Mjerne jedinice i mjerila

ISO1438:2017enHydrometry –Open channel flowmeasurement using thin-plateweirsHidrometrija – Mjerenje protoka u otvorenim kanalima primjenom tankostjenih preljeva

ISO4359:2013/Amd1:2017enFlowmeasurementstructures–Rectangular,trapezoidalandU-shapedflumes

prEN 1�480 enGasmeters–RotarydisplacementgasmetersPlinomjeri – Plinomjeri s rotacijskim klipovima

HZN/TO 515, Žičare, uspinjače i vučnice

prEN 1709 enSafety requirements for cableway installations designed tocarry persons – Precommissioning inspection and instructions formaintenanceandoperationalinspectionSigurnosni zahtjevi za žičare za prijevoz osoba – Preglediprije preuzimanja, održavanje, pregledi u tijeku uporabe iprovjere

prEN 1�9�7 enSafety requirements for cableway installations designed tocarry persons – RopesSigurnosnizahtjevizažičarezaprijevozosoba–Užad

HZN/TO 517, Posebne vrste konstrukcija

EN13374:2013/prA1enTemporaryedgeprotection systems–Product specification– Test methodsPrivremene ograde – Specifikacija proizvoda – Metodeispitivanja

HZN/TO 521, Usluge održavanja

prEN 15341 enMaintenance–MaintenanceKeyPerformanceIndicatorsOdržavanje–Ključnipokazateljiučinkovitostiodržavanja

HZN/TO 522, Karakterizacija i zbrinjavanje otpada

prEN 14701-4 enCharacterization of sludges–Filtration properties –Part 4:DeterminationofthedrainabilityofflocculatedsludgesKarakterizacija mulja – Filtracijska svojstva – 4. dio:Određivanjesposobnostiodvodnjavanjaflokuliranihmuljeva


HZN/TO 524, Inteligentni transportni sustavi

prEN 16157-1 enIntelligent transport systems – DATEX II data exchangespecifications for traffic management and information –Part1:ContextandFrameworkInteligentni transportni sustavi – DATEX II specifikacija zarazmjenu podataka za upravljanje prometom i informiranje–1.dio:Okruženjeiokvir

prEN 16157-� enIntelligent transport systems – DATEX II data exchangespecifications for traffic management and information –Part2:LocationreferencingInteligentni transportni sustavi – DATEX II specifikacija zarazmjenu podataka za upravljanje prometom i informiranje–2.dio:Referenciranjelokacija

prEN 16157-3 enIntelligent transport systems – DATEX II data exchangespecifications for traffic management and information –Part3:SituationPublicationInteligentni transportni sustavi – DATEX II specifikacije zarazmjenupodatakazaupravljanjeprometom i informacijeoprometu–3.dio:Objavasituacija

prEN 16157-7 enIntelligent transport systems – DATEX II data exchangespecifications for traffic management and information –Part7:CommondataelementsInteligentni transportni sustavi – DATEX II specifikacija zarazmjenu podataka za upravljanje prometom i informiranje–7.dio:Zajedničkielementipodataka

HZN/TO 525, Hidroizolacijski materijali i proizvodi za pokrivanje krovova

prEN 10�4 enClayroofingtilesfordiscontinuouslaying–Determinationofgeometric characteristicsGlineni crijep za prijeklopno polaganje – Određivanjegeometrijskihznačajka

HZN/TO 528, Oprema za željeznice

EN14363:2016/prA1enRailway applications – Testing and Simulation for theacceptance of running characteristics of railway vehicles–RunningBehaviourandstationarytestsŽeljeznički sustav – Ispitivanje i simulacija za prihvatljivostvoznih svojstava željezničkih vozila – Dinamička i statičkaispitivanja

EN15877-1:2012/prA1enRailwayapplications–Markingonrailwayvehicles–Part1:FreightwagonsŽeljezničkisustav–Oznakenaželjezničkimvozilima–1.dio:Teretni vagoni

EN16186-3:2016/prA1enRailway applications – Driver’s cab – Part 3: Design ofdisplaysŽeljeznički sustav – Upravljačnica – 3. dio: Projektiranjezaslona


prEN ISO 8067 enFlexiblecellularpolymericmaterials–Determinationof tearstrength(ISO/DIS8067:2017)Savitljivipjenastipolimernimaterijali–Određivanjezadernečvrstoće(ISO/DIS8067:2017)

prEN ISO 8307 enFlexible cellular polymeric materials – Determination ofresiliencebyballrebound(ISO/DIS8307:2017)Savitljivipjenastipolimernimaterijali–Određivanjeelastičnostiodskokomkuglice(ISO/DIS8307:2017)

prEN ISO 10�10 enPlastics – Methods for the preparation of samples forbiodegradationtestingofplasticmaterials(ISO10210:2012)

prEN ISO 14853 enPlastics – Determination of the ultimate anaerobicbiodegradation of plastic materials in an aqueoussystem – Method by measurement of biogas production (ISO14853:2016)

prEN ISO 15985 enPlastics – Determination of the ultimate anaerobicbiodegradation under high-solids anaerobic-digestion conditions – Method by analysis of released biogas (ISO15985:2014)

prEN 171�9 enContinuous-fibre-reinforced plastic composites – Pultrudedunidirectional rods – Determination of tensile properties inparalleltothefibredirection

prEN ISO 18830 enPlastics – Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sedimentinterface – Method by measuring the oxygen demand inclosedrespirometer(ISO18830:2016)

prEN ISO 19679 enPlastics – Determination of aerobic biodegradation ofnon-floating plastic materials in a seawater/sedimentinterface – Method by analysis of evolved carbon dioxide (ISO19679:2016)

prEN ISO �1301-1 enPlastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusionmaterials–Part1:Designationsystemandbasisforspecifications(ISO/DIS21301-1:2017)

prEN ISO �1301-� enPlastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusionmaterials–Part2:Preparationof test specimensanddeterminationofproperties(ISO/DIS21301-2:2017)

prEN ISO �1304-1 enPlastics – Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO/DIS21304-1:2017)

prEN ISO �9988-1 enPlastics–Polyoxymethylene(POM)mouldingandextrusionmaterials – Part 1: Designation system and basis forspecifications(ISO/DIS29988-1:2017)Plastika – Poli(oksimetilenski) (POM) materijali za kalupljenje i ekstrudiranje – 1. dio: Sustav označivanja i osnove zaspecifikacije(ISO/DIS29988-1:2017)

prEN ISO �9988-� enPlastics–Polyoxymethylene(POM)mouldingandextrusionmaterials – Part 2: Preparation of test specimens anddeterminationofproperties(ISO/DIS29988-2:2017)Plastika – Poli(oksimetilenski) (POM) materijali za kalupljenje i ekstrudiranje–2.dio:Pripremaispitnihuzorakaiodređivanjesvojstava(ISO/DIS29988-2:2017)


FprCEN/TS 1�697-50 enBituminousmixtures–Testmethods–Part 50:ResistancetoscuffingBitumenske mješavine – Metode ispitivanja – 50. dio:Otpornost na habanje

prEN 13036-5 enRoad and airfield surface characteristics – Test methods –Part5:DeterminationoflongitudinalunevennessindicesPovršinska svojstva cesta i aerodromskih operativnih površina –Metode ispitivanja–5.dio:Određivanje indeksauzdužneneravnosti

HZN/TO 534, Spremnici za teret

EN14116:2012+A1:2014/prA2enTanksfortransportofdangerousgoods–DigitalinterfaceforproductrecognitiondevicesforliquidfuelsSpremnicizaprijevozopasnihtvari–Digitalnosučeljeuređajazaprepoznavanjeproizvodazatekućagoriva

EN16657:2016/prA1enTanksforthetransportofdangerousgoods–TransporttankequipmentforoverfillpreventiondevicesforstatictanksSpremnici za prijevoz opasnih tvari – Oprema na transportnom spremniku za uređaje za sprječavanje prepunjenostinepomičnihspremnika

prEN 171�4 enHydrogenfuel–Productspecificationandqualityassurance–Protonexchangemembrane(PEM)fuelcellapplicationsforroad vehicles


prEN 171�7 enOutdoor hydrogen refuelling points dispensing gaseoushydrogenandincoroporatingfillingprotocols

prEN ISO 17�68 enGaseoushydrogenlandvehiclerefuellingconnectiondevices(ISO/DIS17268:2017)Priključni uređaji za punjenje gorivom terenskih vozila natekućivodik(ISO/DIS17268:2017)

HZN/TO 536, Vrata, prozori i staklo u graditeljstvu

prEN 57�-9 enGlass in building – Basic soda lime silicate glass products–Part9:ProductstandardStaklo u graditeljstvu – Proizvodi od osnovnog natrij-kalcij-silikatnogstakla–9.dio:Normazaproizvod

prEN 14178-1 enGlassinbuilding–Basicalkalineearthsilicateglassproducts–Part1:FloatglassStaklo u graditeljstvu – Osnovni zemnoalkalijski, silikatni, stakleniproizvodi–1.dio:Floatstaklo

prEN 14178-� enGlassinbuilding–Basicalkalineearthsilicateglassproducts–Part2:ProductstandardStaklo u graditeljstvu – Osnovni zemnoalkalijski, silikatni, stakleniproizvodi–2.dio:Normazaproizvod

EN16361:2013+A1:2016/prA2:2017enPower operated pedestrian doors – Product standard,performance characteristics – Pedestrian doorsets, otherthanswingtype,initiallydesignedforinstallationwithpoweroperationStrojno pogonjena vrata za pješake – Norma za proizvod, izvedbene značajke – Vrata za pješake, osimmimokretnihtipova, koja su u osnovi projektirana za ugradnju sa strojnim pogonom

HZN/TO 537, Tehnički crteži, dimenzijske i geometrijske specifikacije, opis proizvoda i odgovarajuća dokumentacija

prEN ISO 641�-1 enTechnical drawings – Simplified representation of pipelines– Part 1: General rules and orthogonal representation (ISO/FDIS6412-1:2017)Tehničkicrteži–Pojednostavljeniprikazcjevovoda–1.dio:Općapravilaiortogonalniprikaz(ISO/FDIS6412-1:2017)

prEN ISO 641�-� enTechnical drawings – Simplified representation of pipelines–Part2:Isometricprojection(ISO/FDIS6412-2:2017)Tehničkicrteži–Pojednostavljeniprikazcjevovoda–2.dio:Izometrijskaprojekcija(ISO/FDIS6412-2:2017)

prEN ISO 641�-3 enTechnical drawings – Simplified representation of pipelines –Part3:Terminalfeaturesofventilationanddrainagesystems(ISO/FDIS6412-3:2017)Tehničkicrteži–Pojednostavljeniprikazcjevovoda–3.dio: Značajke završetaka ventilacijskih i odvodnih sustava (ISO/FDIS6412-3:2017)

ENISO14405-2:2011/prA1enGeometrical product specifications (GPS) – Dimensionaltolerancing – Part 2: Dimensions other than linear sizes (ISO14405-2:2011/DAM1:2017)Geometrijske specifikacije proizvoda (GSP) – Tolerancijedimenzija – 2. dio: Dimenzije koje nisu duljinske (ISO14405-2:2011/DAM1:2017)

HZN/TO 539, Kemijski dezinficijensi i antiseptici

prEN 14885 enChemical disinfectants and antiseptics – Applicationof European Standards for chemical disinfectants andantisepticsKemijski dezinficijensi i antiseptici – Primjena europskihnormazakemijskedezinficijenseiantiseptike


prEN 18��-1 enHigh efficiency air filters (EPA;HEPA andULPA) – Part 1:Classification,performancetesting,markingVisokoučinkoviti zračni filtri (EPA, HEPA i ULPA) – 1. dio:Razredba,ispitivanjeznačajka,označivanje

FprEN 1�977-1 enThermal solar systems and components – Custom built systems – Part 1: General requirements for solar waterheaters and combisystemsSunčani toplinski sustavi i komponente – Sustavi izrađeniponarudžbi–1.dio:Općizahtjevizasunčanegrijačevodeikombinirane sustave

FprEN 1�977-� enThermal solar systems and components – Custom built systems–Part2:TestmethodsforsolarwaterheatersandcombisystemsSunčanitoplinskisustaviikomponente–Sustaviizrađeniponarudžbi–2.dio:Metodeispitivanjazasunčanegrijačevodei kombinirane sustave

FprEN 1�977-3 enThermal solar systems and components – Custom built systems–Part3:Performancetestmethodsforsolarwaterheater storesSunčani toplinski sustavi i komponente – Sustavi izrađenipo narudžbi – 3. dio: Metode ispitivanja radnih značajkaspremnikazasunčanegrijačevode

FprEN 1�977-4 enThermal solar systems and components – Custom built systems – Part 4: Performance test methods for solarcombistoresSunčanitoplinskisustaviikomponente–Sustaviizrađeniponarudžbi–4.dio:Metodeispitivanjaradnihznačajkasunčanihkombiniranih spremnika

FprEN 1�977-5 enThermal solar systems and components – Custom built systems – Part 5: Performance test methods for controlequipmentSunčanitoplinskisustaviikomponente–Sustaviizrađeniponarudžbi–5.dio:Metodeispitivanjeradnihznačajkaopremeza upravljanje

CEN/TR16798-2:2017enEnergy performance of buildings – Ventilation for buildings– Part 2: Interpretation of the requirements in EN 16798-1– Indoor environmental input parameters for design andassessmentof energyperformanceof buildingsaddressingindoor air quality, thermal environment, lighting and acoustics (Module M1-6)Energijska svojstva zgrada – Ventilacija u zgradama –2.dio:TumačenjezahtjevaunormiEN16798-1–Ulaznimikroklimatski parametri za projektiranje i procjenu energijske učinkovitosti zgrada koji se odnose na kvalitetu zraka,toplinskookruženje,rasvjetuiakustiku(ModulM1-6)

HZN/TO 544, Strojni elementi

prEN ISO 888 enFasteners–Bolts,screwsandstuds–Nominallengthsandthreadlengths(ISO888:2012)Spojni elementi – Vijci i svorni vijci – Nazivne duljine i navojne duljine(ISO888:2012)

prEN ISO 404� enFasteners–Electroplatedcoatingsystems(ISO/DIS4042:2017)Spojnielementi–Sustavelektrolitičkezaštite(ISO/DIS4042:2017)

HZN/TO 546, Očuvanje kulturne baštine

prEN 171�1 enConservationofculturalheritage–HistoricTimberStructures–GuidelinesfortheOnSiteAssessment

prEN 17135 enConservation of cultural heritage – Generale terms fordescribingthealterationsofobjects

prEN 17138 enConservationofculturalheritage–Methodsandmaterialsforcleaning porous inorganic materials

HZN/TO 555, Medicinski proizvodi

prEN 17141 enCleanrooms and associated controlled environments –BiocontaminationcontrolČisti prostori i odgovarajući kontrolirani okoliš – Kontrolazagađenjabiološkimmaterijalom



prEN 35�-4 enHearing protectors – Safety requirements and testing –Part4:Level-dependentear-muffsŠtitnicisluha–Sigurnosnizahtjeviiispitivanje–4.dio:Ušneškoljke ovisne o razini

prEN 35�-5 enHearing protectors – Safety requirements and testing –Part5:Activenoisereductionear-muffsŠtitnicisluha–Sigurnosnizahtjeviiispitivanje–5.dio:Ušneškoljke s aktivnom kompenzacijom šuma

prEN 35�-6 enHearing protectors – Safety requirements and testing –Part6:Ear-muffswithelectricalaudioinputŠtitnicisluha–Sigurnosnizahtjeviiispitivanje–6.dio:Ušneškoljkesaudio-električkimulazom

prEN 35�-7 enHearing protectors – Safety requirements and testing –Part7:Level-dependentear-plugsŠtitnicisluha–Sigurnosnizahtjeviiispitivanje–7.dio:Ušničepoviovisniorazini

prEN 35�-8 enHearing protectors – Safety requirements and testing –Part8:Entertainmentaudioear-muffsŠtitnici sluha – Sigurnosni zahtjevi i ispitivanje – 8. dio:Audioušne školjke namijenjene zabavi

prEN 35�-9 enHearing protectors – Safety requirements and testing –Part9:EarplugswithelectricalaudioinputŠtitnicisluha–Sigurnosnizahtjeviiispitivanje–9.dio:Ušničepovisaudio-električkimulazom

prEN 35�-10 enHearing protectors – Safety requirements and testing –Part10:EarplugswithentertainmentaudioinputŠtitnicisluha–Sigurnosnizahtjeviiispitivanje–10.dio:Ušničepićisaudioulazomnamijenjenizabavi

prEN ISO ��568-1 enFoot and leg protectors – Requirements and test methods for footwear components assessment – Metallic toecaps (ISO/DIS22568-1:2017)Štitnici stopala i nogu – Zahtjevi i metode ispitivanja za procjenu dijelovaobuće–Metalnekapice(ISO/DIS22568-1:2017)

prEN ISO ��568-� enFoot and leg protectors – Requirements and test methods for footwear component assessment –Part 2:Non-metallictoecaps(ISO/DIS22568-2:2017)Štitnici stopala i nogu – Zahtjevi i metode ispitivanja za procjenu dijelova obuće – 2. dio: Nemetalne kapice (ISO/DIS22568-2:2017)

prEN ISO ��568-3 enFoot and leg protectors – Requirements and test methods forfootwearcomponentsassessment–Part3:Metallicanti-perforationinsert(ISO/DIS22568-3:2017)Štitnici stopala i nogu – Zahtjevi i metode ispitivanja za procjenu dijelova obuće – 3. dio: Metalni antiperforacijskiuložak(ISO/DIS22568-3:2017)

prEN ISO ��568-4 enFoot and leg protectors – Requirements and test methods forfootwearcomponentsassessment–Part4:Non-metallicperforationresistantinsert(ISO/DIS22568-4:2017)Štitnici stopala i nogu – Zahtjevi i metode ispitivanja za procjenu dijelova obuće – 4.dio:Nemetalni antiperforacijskiuložak(ISO/DIS22568-4:2017)

HZN/TO 557, Zaštitna odjeća

EN16523-1:2015/prA1enDetermination of material resistance to permeation bychemicals – Part 1: Permeation by potentially hazardousliquidchemicalsunderconditionsofcontinuouscontactOdređivanje otpornosti materijala na permeaciju kemikalija–1.dio:Permeacijapotencijalnoopasnihtekućihkemikalijauuvjetima stalnog dodira

EN16523-2:2015/prA1enDetermination of material resistance to permeation bychemicals – Part 2: Permeation by potentially hazardousgaseouschemicalsunderconditionsofcontinuouscontactOdređivanje otpornosti materijala na permeaciju kemikalija–2.dio:Permeacijapotencijalnoopasnihplinovitihkemikalijau uvjetima stalnog dodira

HZN/TO 558, Zaštita dišnih putova

prEN 143 enRespiratoryprotectivedevices–Particlefilters–Requirements,testing, markingZaštitne naprave za disanje – Filtri za čestice – Zahtjevi,ispitivanje,označivanje

prEN 148-1 enRespiratory protective devices – Threads for facepieces–Part1:StandardthreadconnectionZaštitne naprave za disanje – Navoji za maske – 1. dio:Standardni spoj s navojem

prEN 14387 enRespiratoryprotectivedevices–Gas filter(s)andcombinedfilter(s)–Requirements,testing,markingZaštitnenapravezadisanje–Filtar(filtri)zaplinikombiniranifiltar(filtri)–Zahtjevi,ispitivanje,označivanje

HZN/TO 560, Tekstilni proizvodi

prENISO105-B03enTextiles–Testsforcolourfastness–PartB03:Colourfastnesstoweathering:Outdoorexposure(ISO/FDIS105-B03:2017)Tekstil – Ispitivanje postojanosti obojenja – Dio B03:Postojanost obojenja na atmosferske uvjete: Direktnoizlaganje(ISO/FDIS105-B03:2017)

prEN ISO 3175-4 enTextiles – Professional care; drycleaning and wetcleaningof fabrics and garments – Part 4: Procedure for testingperformance when cleaning and finishing using simulatedwetcleaning(ISO/DIS3175-4:2017)Tekstil – Profesionalna njega, kemijsko čišćenje i mokročišćenjeplošnihtekstilaiodjevnihpredmeta–4.dio:Postupakza ispitivanje svojstava primjenom simuliranog mokrog čišćenjapričišćenjuioplemenjivanju(ISO/DIS3175-4:2017)

prEN 17137 enTextiles–Determinationofthecontentofcompoundsbasedon chlorobenzenes and chlorotoluenes


EN13445-3:2014/prA12enUnfiredpressurevessels–Part3:DesignNeloženetlačneposude–3.dio:Projektiranje

EN13445-5:2014/prA2enUnfiredpressurevessels–Part5:InspectionandtestingNeloženetlačneposude–5.dio:Preglediispitivanje

HZN/TO 563, Sigurnost strojeva

EN13870:2015/prA1enFood processing machinery – Portion cutting machines –SafetyandhygienerequirementsStrojevi za preradu hrane – Strojevi za rezanje mesa – Sigurnosni i higijenski zahtjevi

HZN/TO 571, Sport, igrališta i ostali rekreacijski sadržaji i oprema

prEN 959 enMountaineering equipment – Rock anchors – Safetyrequirements and test methodsPlaninarska oprema – Stijenska sidra – Sigurnosni zahtjevi i metode ispitivanja

EN12277:2015/prA1enMountaineeringequipment–Harnesses–Safetyrequirementsand test methodsPlaninarska oprema – Pojasovi – Sigurnosni zahtjevi i metode ispitivanja

prEN 15�88-1 enSwimmingpools–Part1:SafetyrequirementsfordesignBazeni–1.dio:Sigurnosnizahtjevizaprojektiranje


prEN 15�88-� enSwimmingpools–Part2:SafetyrequirementsforoperationBazeni–2.dio:Sigurnosnizahtjevizaupravljanje

ENISO23537-1:2016/prA1enRequirements for sleeping bags – Part 1: Thermal anddimensionalrequirements(ISO23537-1:2016/DAmd1:2017)Zahtjevi za vreće za spavanje – 1. dio: Toplinski zahtjevi izahtjevizadimenzije(ISO23537-1:2016/DAmd1:2017)

HZN/TO 573, Elektronički račun

FprCEN/TS 16931-3-� enElectronic invoicing – Part 3-2: Syntax binding for ISO/IEC19845(UBL2.1)invoiceandcreditnoteElektroničkiračun–Dio3-2:SintaksnopovezivanjezanormuISO/IEC19845(UBL2.1),računiodobrenje

FprCEN/TS 16931-3-3 enElectronicinvoicing–Part3-3:SyntaxbindingforUN/CEFACTXMLIndustryInvoiceD16BElektroničkiračun–Dio3-3:SintaksnopovezivanjezanormuUN/CEFACTXMLIndustryInvoiceD16B

FprCEN/TS 16931-3-4 enElectronicinvoicing–Part3-4:SyntaxbindingforUN/EDIFACT INVOICD16BElektroničkiračun–Dio3-4:SintaksnopovezivanjezanormuUN/EDIFACTINVOICD16B

HZN/TO 574, Sustavi upravljanja kvalitetom, rizicima, vrijednostima i inovacijama

ISO10007:2017enQuality management – Guidelines for configurationmanagementUpravljanje kvalitetom – Smjernice za upravljanje konfiguracijom

HZN/TO E9, Električna oprema za željeznicu

prEN50238-1:2017enRailway applications – Compatibility between rolling stockandtraindetectionsystems–Part1:GeneralŽeljezničkisustav–Kompatibilnostizmeđuželjezničkihvozilaisustavadetekcijevlaka–1.dio:Općenito

EN62580-1:2016/A11:2017enElectronic railway equipment – On-board multimediaand telematic subsystems for railways – Part 1: GeneralarchitectureElektroničkaopremazaželjeznice–Željezničkimultimedijskiitelematičkipodsustavinavozilu–1.dio:Općaarhitektura

HZN/TO E11, Nadzemni vodovi

EN50341-2-13:2017/A1:2017enOverhead electrical lines exceedingAC 1 kV – Part 2-13:National Normative Aspects (NNA) for ITALY (based on EN50341-1:2012)Nadzemni električni vodovi izmjenične struje iznad 1 kV–Dio2-13:Nacionalninormativniaspekti(NNA)zaItaliju(natemeljuEN50341-1:2012)

HZN/TO E17, Sklopni i upravljački uređaji

prEN60947-4-1:2017enLow-voltageswitchgearandcontrolgear–Part4-1:Contactorsand motor-starters – Electromechanical contactors and motor-starters(IEC60947-4-1:201X)Niskonaponska sklopna aparatura – Dio 4-1: Sklopnici imotorski pokretači – Elektromehanički sklopnici i motorskipokretači(IEC60947-4-1:201X)

prEN62271-102:2017enHigh-voltage switchgear and controlgear – Part 102:Alternating current disconnectors and earthing switches (IEC62271-102:201X)

HZN/TO E31, Eksplozivne atmosfere

prEN ISO/IEC 80079-34 enExplosiveatmospheres–Part34:Applicationofqualitysystemsforequipmentmanufacture(ISO/IEC/DIS80079-34:2017)Eksplozivne atmosfere – 34. Dio: Primjena sustavaupravljanja kvalitetom u proizvodnji opreme (ISO/IEC/DIS80079-34:2017)

HZN/TO E57, Upravljanje energetskim sustavom i pridružene komunikacije

prEN61970-456:2017enEnergy management system application program interface(EMS-API) – Part 456: Solved power system state profiles(IEC61970-456:201X)Sučelje za aplikacije vođenja elektroenergetskog sustava(EMS-API)–456.dio:Riješeniprofilistanjaelektroenergetskogsustava(IEC61970-456:201X)

HZN/TO E61, Sigurnost električnih kućanskih i sličnih aparata

EN60335-2-27:2013/FprA2:2017enHousehold and similar electrical appliances – Safety –Part 2-27:Particular requirements for appliances forskin exposuretoopticalradiation(IEC60335-2-27:2009/am2:2015)

HZN/TO E62, Električna oprema u medicinskoj praksi

prEN60601-2-26:2017enMedical electrical equipment – Part 2-26: Particularrequirementsforthebasicsafetyandessentialperformanceofelectroencephalographs(IEC60601-2-26:201X)Medicinskaelektričnaoprema–Dio2-26:Posebnizahtjevizaosnovnusigurnostibitneradneznačajkeelektroencefalografa(IEC60601-2-26:201X)

HZN/TO E64, Električne instalacije i zaštita od električnog udara

prHD60364-5-56:2017enLow-voltage electrical installations – Part 5-56: Selectionand erection of electrical equipment – Safety services (IEC60364-5-56:201X)Niskonaponske električne instalacije – Dio 5-56: Odabir iugradnjaelektričneopreme–Instalacijezasigurnosnesvrhe(IEC60364-5-56:201X)

HZN/TO E72, Naprave za automatsko upravljanje u kućanstvu

prEN60730-2-8:2017enAutomatic electrical controls for household and similaruse – Part 2-8: Particular requirements for electricallyoperated water valves, including mechanical requirements (IEC60730-2-8:201X)Električne naprave za automatsko upravljanje ukućanstvu i sličnu uporabu – Dio 2-8: Posebni zahtjevi zaelektrične ventile za vodu, uključujući mehaničke zahtjeve (IEC60730-2-8:201X)

HZN/TO E79, Alarmni sustavi

prEN 50131-4 enAlarm systems – Intrusion and hold-up systems – Part 4:Warning devicesAlarmni sustavi – Protuprovalni i protuprovalni sustavi –4.dio:Uređajizaupozorenje

HZN/TO E106, Elektromagnetska polja u ljudskome okolišu

FprEN50364:2017enProduct standard for human exposure to electromagneticfieldsfromdevicesoperatinginthefrequencyrange0Hzto300GHz,usedinElectronicArticleSurveillance(EAS),RadioFrequencyIdentification(RFID)andsimilarapplicationsNorma proizvoda za određivanje izloženosti ljudielektromagnetskimpoljimauređajakojiradeufrekvencijskompodručjuod0Hzdo300GHz tesekoristezaelektroničkukontrolu proizvoda, radiofrekvencijsku identifikaciju i sličneprimjene

HZN/TO E501, Elektroakustika i ultrazvuk

EN62489-1:2010/prA2:2017enElectroacoustics –Audio-frequency induction loop systemsfor assisted hearing – Part 1: Methods of measuringand specifying the performance of system components (IEC62489-1:2010/am2:201X)Elektroakustika – Sustavi s indukcijskim petljama kao slušna pripomoćuaudiofrekvencijskomepodručju–1.dio:Metodemjerenja i određivanje mogućnosti sastavnice sustava (IEC62489-1:2010/am2:201X)



DraftETSIEN300175-1V2.6.6enDigital Enhanced Cordless Telecommunications (DECT) –CommonInterface(CI)–Part1:OverviewDigitalne poboljšane bežične telekomunikacije (DECT) –Zajedničkosučelje(CI)–1.dio:Pregled

DraftETSIEN300175-2V2.6.6enDigital Enhanced Cordless Telecommunications (DECT) –CommonInterface(CI)–Part2:PhysicalLayer(PHL)Digitalne poboljšane bežične telekomunikacije (DECT) –Zajedničkosučelje(CI)–2.dio:Fizičkisloj(PHL)

DraftETSIEN300175-3V2.6.6enDigital Enhanced Cordless Telecommunications (DECT) –Common Interface (CI)–Part3:MediumAccessControl(MAC) layerDigitalne poboljšane bežične telekomunikacije (DECT) – Zajedničko sučelje (CI) – 3. dio: Sloj kontrole pristupamediju (MAC)

DraftETSIEN300175-4V2.6.6enDigital Enhanced Cordless Telecommunications (DECT) –CommonInterface(CI)–Part4:DataLinkControl (DLC)layerDigitalne poboljšane bežične telekomunikacije (DECT)–Zajedničkosučelje(CI)–4.dio:Slojkontrolepodatkovneveze (DLC)

DraftETSIEN300175-5V2.6.6enDigital Enhanced Cordless Telecommunications (DECT) –CommonInterface(CI)–Part5:Network(NWK)layerDigitalne poboljšane bežične telekomunikacije (DECT) –Zajedničkosučelje(CI)–5.dio:Mrežni(NWK)sloj

DraftETSIEN300175-6V2.6.6enDigital Enhanced Cordless Telecommunications (DECT) –CommonInterface(CI)–Part6:IdentitiesandaddressingDigitalne poboljšane bežične telekomunikacije (DECT) –Zajedničkosučelje(CI)–6.dio:Identitetiiadresiranje

DraftETSIEN300175-7V2.6.7enDigital Enhanced Cordless Telecommunications (DECT) –CommonInterface(CI)–Part7:SecurityfeaturesDigitalne poboljšane bežične telekomunikacije (DECT) –Zajedničkosučelje(CI)–7.dio:Sigurnosneznačajke

DraftETSIEN300175-8V2.6.6enDigital Enhanced Cordless Telecommunications (DECT) –CommonInterface(CI)–Part8:Speechandaudiocodingand transmissionDigitalne poboljšane bežične telekomunikacije (DECT) –Zajedničkosučelje(CI)–8.dio:Kodiranjeiprijenosgovorai zvuka

DraftETSIEN301926V1.3.0enSatellite Earth Stations and Systems (SES) – Radio FrequencyandModulationStandardforTelemetry,CommandandRanging(TCR)ofCommunicationsSatellitesSatelitske zemaljske postaje i sustavi (SES) – Radiofrekvencijska i modulacijska norma za telemetriju,upravljanjeiodređivanjeradijusaleta(TCR)komunikacijskihsatelita

HZN/TU B1, Graditeljstvo 1

prEN 13�00-� enSpectatorfacilities–Layoutcriteriaofservicearea–Part2:Characteristics

FprCEN/TR 17113 enConstructionproducts–Assessmentofreleaseofdangeroussubstances –Radiation from construction products –DoseassessmentofemittedgammaradiationGrađevni proizvodi – Procjena otpuštanja opasnih tvari –Zračenjeizgrađevnihproizvoda–Procjenadozeemitiranoggama-zračenja

HZN/TU C1, Kemikalije, kemijsko inženjerstvo, poljoprivredni i prehrambeni proizvodi 1

prEN ISO 19399 enPaintsandvarnishes–Wedge-cutmethodfordeterminationoffilmthickness(scribeanddrillmethod)(ISO19399:2016)

prEN ISO �3900-1 enPigments and extenders – Methods of dispersion andassessment of dispersibility in plastics – Part 1: Generalintroduction(ISO23900-1:2015)Pigmenti i punila – Metode dispergiranja i ocjena sposobnosti dispergiranja u plastici – 1. dio: Opći uvod (ISO23900-1:2015)

prEN ISO �3900-� enPigments and extenders – Methods of dispersion andassessmentofdispersibilityinplastics–Part2:Determinationofcolouristicpropertiesandeaseofdispersioninplasticizedpolyvinylchloridebytwo-rollmilling(ISO23900-2:2015)Pigmenti i punila – Metode dispergiranja i ocjena sposobnosti dispergiranjauplastici–2.dio:Određivanjesvojstvaobojenjai lakoćedispergiranjaupolivinilkloridupostupkomdvostrukogvaljanja(ISO23900-2:2015)

prEN ISO �3900-3 enPigments and extenders – Methods of dispersion andassessmentofdispersibilityinplastics–Part3:Determinationof colouristic properties and ease of dispersion of blackand colour pigments in polyethylene by two-roll milling (ISO23900-3:2015)Pigmenti i punila – Metode dispergiranja i ocjena sposobnosti dispergiranja u plastici – 3. dio: Određivanjekolorističkihsvojstava i lakoćedispergiranjacrnih iobojenihpigmenata u polietilenu postupkom dvostrukog valjanja (ISO23900-3:2015)

prEN ISO �3900-4 enPigments and extenders – Methods of dispersionand assessment of dispersibility in plastics – Part 4:Determinationofcolouristicpropertiesandeaseofdispersionof white pigments in polyethylene by two-roll milling (ISO23900-4:2015)Pigmenti i punila – Metode dispergiranja i ocjena sposobnosti dispergiranja u plastici – 4. dio: Određivanje kolorističkihsvojstavailakoćedispergiranjabijelihpigmenataupolietilenupostupkomdvostrukogvaljanja(ISO23900-4:2015)

prEN ISO �3900-5 enPigments and extenders – Methods of dispersion andassessmentofdispersibilityinplastics–Part5:Determinationbyfilterpressurevaluetest(ISO23900-5:2015)Pigmenti i punila – Metode dispergiranja i ocjena sposobnosti dispergiranjauplastici–5.dio:Određivanjemetodomtlakapomoćufiltra(ISO23900-5:2015)

prEN ISO �3900-6 enPigments and extenders – Methods of dispersion andassessmentofdispersibilityinplastics–Part6:Determinationbyfilmtest(ISO23900-6:2015)Pigmenti i punila – Metode disperzije i ocjenjivanja nesposobnosti disperzije u plastici – 6. dio: Određivanjeispitivanjemfilma(ISO23900-6:2015)


EN474-1:2006+A4:2013/FprA5enEarth-moving machinery – Safety – Part 1: GeneralrequirementsStrojevi za zemljane radove – Sigurnost – 1. dio: Općizahtjevi

HZN/TU N1, Nemetalni materijali 1

prEN 1�130 enFeather and down – Test methods – Determination of thefillingpower(massicvolume)Perje i pahuljica –Metode ispitivanja –Određivanje snagepunjenja (volumen grude)


prEN 13795-1 enSurgical clothing and drapes – Requirements and test methods–Part1:SurgicaldrapesandgownsKirurška odjeća i prekrivači – Zahtjevi i metode ispitivanja –1.dio:Kirurškiprekrivačiiogrtači

prEN 13795-� enSurgical clothing and drapes – Requirements and test methods–Part2:CleanairsuitsKirurška odjeća i prekrivači – Zahtjevi i metode ispitivanja –2.dio:Operacijskaodijela


prEN ISO �0695 enEnteralfeedingsystems–Designandtesting(ISO/DIS20695:2017)Sustavizaunoshrane–Dizajniispitivanje(ISO/DIS20695:2017)


FprEN �114 enAerospace series –Aluminium 1050A-H14 –Wire for solidrivets–D≤10mm

FprEN �119 enAerospace series – Heat resisting alloy FE-PA�601 (X6NiCrTiMoV26-15) – Solution treated and precipitation treated–Wiresforrivets–2mm≤D≤10mm–Rm≥960MPa

FprEN �135 enAerospace series – Steel FE-PL61 – Carburized, hardened andtempered–Bar–De≤40mm

FprEN �137 enAerospaceseries–SteelFE-PL75–1100MPa≤Rm≤1250MPa –Bars–De≤100mm

FprEN �174 enAerospace series – Heat resisting alloy FE-PA�60� (X4NiCrTiMoV26-15) – Solution treated and precipitationtreated–Forgings–De≤100mm–Rm≥850MPa

FprEN ��1 enAerospace series – Steel FE-PL31 – Hardened and tempered –Hollowbars–3,5mm≤a≤55mm

FprEN �� enAerospace series – Steel FE-PL31 – Hardened and tempered –Handanddieforgings

FprEN �591-403 enAerospace series – Elements of electrical and opticalconnection–Testmethods–Part403:SinusoidalandrandomvibrationZrakoplovstvo–Elementielektričneioptičkeveze–Metodeispitivanja–403.dio:Sinusneislučajnevibracije

FprEN 3475-603 enAerospace series – Cables, electrical, aircraft use – Testmethods–Part603:ResistancetowetarctrackingZrakoplovstvo–Električnikabelizaupotrebuuzrakoplovstvu–Metodeispitivanja–603.dio:Otpornostnaiskrenjeuvlazi

FprEN 3475-604 enAerospace series – Cables, electrical, aircraft use – Testmethods–Part604:ResistancetodryarcpropagationZrakoplovstvo–Električnikabelizaupotrebuuzrakoplovstvu–Metodeispitivanja–604.dio:Otpornostnaiskrenjeusuhojsredini

FprEN 3475-605 enAerospace series – Cables, electrical, aircraft use – Testmethods–Part605:WetshortcircuittestZrakoplovstvo–Električnikabelizaupotrebuuzrakoplovstvu–Metode ispitivanja – 605. dio: Ispitivanje kratkog spoja uvlazi

FprEN 3904 enAerospaceseries–Washers,wirelockinginaluminiumalloy,anodized

FprEN 4400-1 enAerospace series – Aluminium and aluminium-and magnesium-alloys – Technical specification – Part 1: Aluminium andaluminium alloy plate

FprEN 4400-� enAerospace series – Aluminium and aluminium-and magnesium-alloys – Technical specification – Part 2: Aluminium andaluminium alloy sheet and strip

FprEN 4400-3 enAerospace series – Aluminium and aluminium-and magnesium-alloys – Technical specification – Part 3: Aluminium andaluminium alloy bar and section

FprEN 4400-6 enAerospace series – Aluminium and aluminium-and magnesium-alloys – Technical specification – Part 6: Aluminium alloyforgingstock

FprEN 465�-00� enAerospace series – Connectors, coaxial, radiofrequency–Part002:Specificationofperformances

FprEN 465�-�� enAerospace series – Connectors, coaxial, radio frequency–Part222:Type2,TNCinterface–Crimpversion–Squareflangereceptacle–Productstandard

FprEN 465�-3�0 enAerospace series – Connectors, coaxial, radio frequency –Part320:Type3,Ninterface–Crimpversion–Straightplug– Product standard

FprEN 4674-004 enAerospace series – Electrical cables, installation – Self-wrappingshielding(EMI)protectivesleeve–Part004:Opensleeve – Outside pressurized area – EMI protection 10 kA –Temperaturerange–65°Cto200°C–ProductstandardZrakoplovstvo–Električnikabeli,ugradnja–Samoomatajuća,oklopljena(EMI)zaštitnanavlaka–Dio004:Otvorenanavlaka– Vanjsko područje pod kontroliranim tlakom – EMI zaštita 10kA–Temperaturnirasponod–65°Cdo200°C–Normaza proizvod

FprEN 4708-104 enAerospace series – Sleeving; heat-shrinkable; for binding;insulation and identification – Part 104: Semi-rigidpolyvinylidene fluoride (PDVF) – Operating temperature –55°Cto175°C–ProductStandard

FprEN 4708-301 enAerospace series – Sleeving; heat-shrinkable, for binding,insulation and identification – Part 301: Adhesive linedpolyolefin sleevings – Operating temperature – 55 °C to 105°C-ProductStandard

FprEN 6041 enAerospace series – Non-metallic materials – Test method –Analysisofnon-metallicmaterials(uncured)byDifferentialScanning Calorimetry (DSC)

FprEN 6059-303 enAerospace series – Electrical cables, installation – Protection sleeves–Testmethods–Part303:Resistancetofluids

FprEN 9133 enAerospace series – Quality Management Systems –QualificationProcedureforAerospaceStandardProductsZrakoplovstvo – Sustavi upravljanja kvalitetom – Postupak kvalifikacijezastandardnedijeloveuzrakoplovstvu

FprEN 9145 enAerospace series – Requirements for Advanced ProductQualityPlanningandProductionPartApprovalProcess

FprEN 916� enAerospace series – Aerospace Operator Self-VerificationPrograms

FprEN 9��3-100 enProgramme Management – Configuration Management– Part 100:A guide for the application of the principles ofconfigurationmanagement

FprEN 9��3-101 enProgramme Management – Configuration Management –Part101:Configurationidentification

FprEN 9��3-10� enProgramme Management – Configuration Management –Part102:Configurationstatusaccounting

FprEN 9��3-103 enProgrammeManagement–ConfigurationManagement–Part103:ConfigurationVerifications,ReviewsandAudits

FprEN 9��3-104 enProgrammeManagement–ConfigurationManagement–Part104:ConfigurationControl

FprEN 9��3-105 enProgramme Management – Configuration Management–Part105:Glossary

FprEN 9300-010 enAerospace series – LOTAR – LOng Term Archiving and Retrievalofdigital technicalproductdocumentationsuchas3D,CADandPDMdata–Part010:OverviewDataFlow

FprEN 9300-110 enAerospace series – LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation suchas3D,CADandPDMdata–Part110:CADmechanical3DExplicitgeometryinformation

A�0 HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije

FprEN 9300-115 enAerospace series – LOTAR – LOng Term Archiving and Retrievalofdigital technicalproductdocumentationsuchas3D,CADandPDMdata–Part115:ExplicitCADassemblystructure

prEN 1684�-3 enPowered industrial trucks – Visibility – Test method andverification – Part 3: Reach trucks up to and including 10 000 kg

prEN 1684�-4 enPowered industrial trucks – Visibility – Test methods andverification–Part4:Industrialvariablereachtrucksuptoandincluding 10 000 kg capacity

prEN 1684�-6 enPowered industrial trucks – Visibility – Test methods andverification–Part6:Sit-oncounterbalancetrucksandroughterrain masted trucks greater than 10 000 kg capacity

prEN 1684�-7 enPowered industrial trucks – Visibility – Test method forverification – Part 7: Variable reach and masted containertruckshandlingfreightcontainersof6mlengthandlonger


CLC/TS50625-3-3:2017enCollection, logistics & treatment requirements for WEEE–Part3-3:Specificationforde-pollution–WEEEcontainingCRTsandflatpaneldisplaysZahtjevizaprikupljanje,logistikuiobraduotpadneelektričneielektroničkeopreme–Dio3-3:Specifikacijazauklanjanjeonečišćenja–Električnaielektroničkaoprema(WEEE)kojasadržikatodnecijevi(CRT)iravneekrane

HZN/TU V1, Elektronika 1

prEN60384-26:2017enFixedcapacitors foruse inelectronicequipment–Part 26: Sectional specification – Fixed aluminium electrolyticcapacitors with conductive polymer solid electrolyte (IEC60384-26:201X)

prEN61010-2-091:2017enSafetyrequirementsforelectricalequipmentformeasurement,controlandlaboratoryuse–Part2-091:ParticularrequirementsforcabinetX-raysystems(IEC61010-2-091:201X)Sigurnosni zahtjevi za mjernu, upravljačku i laboratorijskuelektričnuopremu–Dio2-091:Posebnizahtjevizarendgenskesustaveukućištu(IEC61010-2-091:201X)

prEN61290-4-3:2017enOpticalamplifiers–Testmethods–Part4-3:Powertransientparameters–Singlechannelopticalamplifiersinoutputpowercontrol(IEC61290-4-3:201X)

prEN61290-4-4:2017enOpticalamplifiers–Testmethods–Part4-4:Gaintransientparameters – Single channel optical amplifiers with gaincontrol(IEC61290-4-4:201X)

prEN61291-1:2017enOpticalamplifiers–Part1:Genericspecification(IEC61291-1:201X)

prEN61300-3-21:2017enFibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-21: Examinations and measurements – Switching time (IEC61300-3-21:201X)

prEN61757-1:2017enFibreopticsensors–Part1:Genericspecification(IEC61757-1:201X)

prEN62228-1:2017enIntegratedCircuits–EMCevaluationoftransceivers–Part1:Generalconditionsanddefinitions(IEC62228-1:201X)

prEN62343-3-4:2017enDynamic modules – Part 3-4: Performance specificationtemplates–Multicastopticalswitches(IEC62343-3-4:201X)

prEN62435-4:2017enElectronic components – Long-term storage of electronicsemiconductordevices–Part4:Storage(IEC62435-4:201X)

prEN63032:2017enFibre optic interconnecting devices and passive components –Fibreoptictuneablebandpassfilters–Genericspecification(IEC63032:201X)

prEN63041-1:2017enPiezoelectric Sensors – Part 1: Generic Specifications (IEC63041-1:201X)

prEN63041-2:2017enPiezoelectric Sensors – Part 2: Chemical and BiochemicalSensors(IEC63041-2:201X)

HZN/TU W1, Energetska elektrotehnika 1

EN62841-3-10:2015/prAA:2017enElectric motor-operated hand-held tools; transportabletoolsandlawnandgardenmachinery–Safety–Part3-10:Particularrequirementsfortransportablecut-offmachinesRučnielektromotornialati,prijenosnialati imehanizacijazatravnjakeivrtove–Sigurnost–Dio3-10:Posebnizahtjevizaprijenosne rezne alate

EN62841-3-1:2014/prAA:2017enElectric motor-operated hand-held tools, transportable tools and lawn and gardenmachinery –Safety –Part 3-1: ParticularrequirementsfortransportabletablesawsRučnielektromotornialati,prijenosnialati imehanizacijazatravnjakeivrtove–Sigurnost–Dio3-1:Posebnizahtjevizaprijenosne stolne pile

EN62841-3-6:2014/prAA:2017enElectric Motor-Operated Hand-Held Tools, Transportable ToolsandLawnandGardenMachinery–Safety–Part3-6:Particularrequirements for transportablediamonddrillswithliquid systemRučnielektromotornialati,prijenosnialati imehanizacijazatravnjakeivrtove–Sigurnost–Dio3-6:Posebnizahtjevizadijamantnebušilicesasustavomtekućine

EN62841-3-9:2015/prAA:2017enElectric motor-operated hand-held tools; transportabletools and lawn and gardenmachinery –Safety –Part 3-9: ParticularrequirementsfortransportablemitresawsRučnielektromotornialati,prijenosnialati imehanizacijazatravnjakeivrtove–Sigurnost–Dio3-9:Posebnizahtjevizaprijenosne kutne pile

1.4PovučenehrvatskenormeNa prijedlog tehničkog odbora ravnatelj Hrvatskoga zavoda zanormedonosiodlukuopovlačenjuhrvatskenormekadajedonesenanovahrvatskanorma ili kada jepostojećahrvatskanormapostalaneprimjenjiva. Kadajekojepodručjeuređenopropisimainekiodpropisa(pravilnik,naredba, naputak) upućuje na norme koje su povučene, one seprimjenjujusilom tihpropisa ibitće,do izmjenepropisa ili izradbenovih, na raspolaganju u Normoteci HZN-a.

HZN/TO 22, Cestovna vozila

HRNISO3536:2003en,frCestovnavozila–Sigurnosnastakla–Rječnik(ISO3536:1999)Road vehicles – Safety glazing materials – Vocabulary (ISO3536:1999)-zamijenjenas:HRNISO3536:2017

HRNISO7637-3:2013enCestovnavozila–Električnesmetnjekojenastajuvođenjemisprezanjem–Prijenoselektričnih tranzijenatakapacitivnimili induktivnim sprezanjem vodovima koji nisu namijenjeni napajanju(ISO7637-3:2007)Road vehicles – Electrical disturbances from conductionand coupling – Part 3: Electrical transient transmission bycapacitive and inductive coupling via lines other than supply lines(ISO7637-3:2007)-zamijenjenas:HRNISO7637-3:2017

HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije A�1

HRNISO11452-3:2001enCestovnavozila–Metodeispitivanjasastavnicanaelektričnesmetnje od uskopojasnoga zračenja elektromagnetskeenergije – 3. dio: Transverzalna elektromagnetska (TEM)komora(ISO11452-3:2001)Road vehicles – Component test method for electricaldisturbancesbynarrowbandradiatedelectromagneticenergy– Part 3: Transverse electromagnetic mode (TEM) cell (ISO11452-3:2001)-zamijenjenas:HRNISO11452-3:2017

HRNISO14230-2:2014enCestovna vozila – Dijagnostička veza preko K-linije (DoK-Line)–2.dio:Slojpodatkovneveze(ISO14230-2:2013)Roadvehicles–DiagnosticcommunicationoverK-line(DoK-Line)–Part2:Datalinklayer(ISO14230-2:2013)-zamijenjenas:HRNISO14230-2:2017

HRNISO15082:2003enCestovna vozila – Ispitivanja sigurnosnih stakala od krute plastike(ISO15082:1999)Roadvehicles–Testsforrigidplasticsafetyglazingmaterials(ISO15082:1999)-zamijenjenas:HRNISO15082:2017

HRNISO15501-1:2014enCestovna vozila – Sustavi za opskrbu stlačenim prirodnimplinom(SPP)–1.dio:Sigurnosnizahtjevi(ISO15501-1:2012)Roadvehicles–Compressednaturalgas(CNG)fuelsystems–Part1:Safetyrequirements(ISO15501-1:2012)-zamijenjenas:HRNISO15501-1:2017

HRNISO15501-2:2001enCestovna vozila – Sustavi za opskrbu vozila stlačenimprirodnim plinom, ugrađeni na vozilo – 2. dio: Metodeispitivanja(ISO15501-2:2001)Road vehicles – Compressed natural gas fuelling systems–Part2:Testmethods(ISO15501-2:2001)-zamijenjenas:HRNISO15501-2:2017

HRNISO16845:2004enCestovna vozila – Regulator mrežnog područja (CAN) –Postupakprovjereusklađenosti(ISO16845:2004)Roadvehicles–Controllerareanetwork(CAN)–Conformancetestplan(ISO16845:2004)-zamijenjenas:HRNISO16845-1:2017


HRNENISO636:2016enDodatni i potrošni materijali za zavarivanje – Šipke, žice idepoziti zaTIG zavarivanje nelegiranih i sitnozrnatih čelika–Razredba(ISO636:2015;ENISO636:2015)Welding consumables – Rods, wires and deposits fortungsteninertgasweldingofnon-alloyandfine-grainsteels–Classification(ISO636:2015;ENISO636:2015)-zamijenjenas:HRNENISO636:2017

HRNEN13479:2007enDodatni i potrošni materijali za zavarivanje – Opća normaza dodatne materijale i praškove za zavarivanje metalnih materijalataljenjem(EN13479:2004)Welding consumables – General product standard for fillermetals and fluxes for fusion welding of metallic materials (EN13479:2004)-zamijenjenas:HRNEN13479:2017

HRNENISO14555:2014enZavarivanje–Elektrolučnozavarivanjesvornjakaodmetalnihmaterijala(ISO14555:2014;ENISO14555:2014)Welding – Arc stud welding of metallic materials (ISO14555:2014;ENISO14555:2014)-zamijenjenas:HRNENISO14555:2017

HRNENISO15614-1:2007enSpecifikacijaikvalifikacijapostupakazavarivanjazametalnematerijale – Ispitivanje postupka zavarivanja – 1. dio: Elektrolučno i plinsko zavarivanje čelika te elektrolučnozavarivanje nikla i legura nikla (ISO 15614-1:2004; ENISO15614-1:2004)Specification and qualification of welding procedures formetallicmaterials–Weldingproceduretest–Part1:Arcandgas welding of steels and arc welding of nickel and nickelalloys(ISO15614-1:2004;ENISO15614-1:2004)-zamijenjenas:HRNENISO15614-1:2017

HRNENISO15614-1:2007/A1:2008enSpecifikacija i kvalifikacija postupaka zavarivanja zametalne materijale – Ispitivanje postupka zavarivanja – 1. dio: Elektrolučno i plinsko zavarivanje čelika teelektrolučnozavarivanjenikla i leguranikla–Amandman1 (ISO15614–1:2004/Amd1:2008;ENISO15614-1:2004/A1:2008)Specification and qualification of welding procedures formetallicmaterials–Weldingproceduretest–Part1:Arcandgas welding of steels and arc welding of nickel and nickelalloys – Amendment 1 (ISO 15614–1:2004/Amd 1:2008; ENISO15614-1:2004/A1:2008)-zamijenjenas:HRNENISO15614-1:2017

HRNENISO15614-1:2007/A2:2012enSpecifikacija i kvalifikacija postupaka zavarivanja zametalne materijale – Ispitivanje postupka zavarivanja – 1. dio: Elektrolučno i plinsko zavarivanje čelikate elektrolučno zavarivanje nikla i legura nikla (ISO15614-1:2004/Amd2:2012;ENISO15614-1:2004/A2:2012)Specification and qualification of welding procedures formetallicmaterials–Weldingproceduretest–Part1:Arcandgasweldingofsteelsandarcweldingofnickelandnickelalloys (ISO15614-1:2004/Amd2:2012;ENISO15614-1:2004/A2:2012)-zamijenjenas:HRNENISO15614-1:2017

HZN/TO 108, Mehaničke vibracije i udari

HRNISO1925:2008en,frMehaničke vibracije –Uravnoteženje–Terminološki rječnik(ISO1925:2001)Mechanicalvibration–Balancing–Vocabulary(ISO1925:2001)-zamijenjenas:HRNISO21940-2:2017

HZN/TO 136, Namještaj

HRNEN716-1:2013hr-enNamještaj – Dječji krevetići i sklopivi dječji krevetićiza kućnu uporabu – 1. dio: Sigurnosni zahtjevi (EN716-1:2008+A1:2013)Furniture–Children’scotsandfoldingcotsfordomesticuse–Part1:Safetyrequirements(EN716-1:2008+A1:2013)-zamijenjenas:HRNEN716-1:2017

HRNEN716-2:2013enNamještaj – Dječji krevetići i sklopivi dječji krevetićiza kućnu uporabu – 2. dio: Metode ispitivanja (EN716-2:2008+A1:2013)Furniture–Children’scotsandfoldingcotsfordomesticuse–Part2:Testmethods(EN716-2:2008+A1:2013)-zamijenjenas:HRNEN716-2:2017

HZN/TO 147/PO 2, Kvaliteta vode; Fizikalno-kemijske metode ispitivanja

HRNISO9697:2014enKvaliteta vode – Mjerenje ukupne beta aktivnosti u slatkojvodi–Metodadebelogizvora(ISO9697:2008)Water quality –Measurement of grossbetaactivity in non-salinewater–Thicksourcemethod(ISO9697:2008)-zamijenjenas:HRNENISO9697:2017

HZN/TO 147/PO 7, Kvaliteta vode; Mikrobiološka i biološka ispitivanja

HRNISO11731:2000enKakvoća vode – Detekcija i brojenje Legionella (ISO11731:1998)Water quality – Detection and enumeration of Legionella (ISO11731:1998)-zamijenjenas:HRNENISO11731:2017

HRNENISO11731-2:2008enKakvoća vode – Detekcija i brojenje Legionella – 2. dio:Izravnametodamembranskefiltracijezavodesmalimbrojembakterija(ISO11731-2:2004;ENISO11731-2:2008)Water quality – Detection and enumeration of Legionella –Part2:Directmembranefiltrationmethodforwaterswithlowbacterialcounts(ISO11731-2:2004;ENISO11731-2:2008)-zamijenjenas:HRNENISO11731:2017

HRNENVISO13843:2002enKakvoća vode – Smjernice za vrednovanje mikrobiološkihmetoda(ISO/TR13843:2000;ENVISO13843:2001)Water quality – Guidance on validation of microbiologicalmethods(ISO/TR13843:2000;ENVISO13843:2001)-zamijenjenas:HRNENISO13843:2017

A�� HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije

HZN/TO 179, Zidane konstrukcije

HRNEN15824:2009enSpecifikacije za vanjske i unutrašnje žbuke na osnoviorganskihveziva(EN15824:2009)Specificationsforexternalrendersandinternalplastersbasedonorganicbinders(EN15824:2009)-zamijenjenas:HRNEN15824:2017

HZN/TO 211, Geoinformacije/Geomatika

HRSISO/TS19103:2013enGeoinformacije–Jezikkonceptualnesheme(ISO/TS19103:2005)Geographic information – Conceptual schema language(ISO/TS19103:2005)-zamijenjenas:HRNISO19103:2017

HZN/TO 217, Kozmetika

HRNENISO16212:2011enKozmetika – Mikrobiologija – Brojenje kvasaca i plijesni (ISO16212:2008;ENISO16212:2011)Cosmetics–Microbiology–Enumerationofyeastandmould(ISO16212:2008;ENISO16212:2011)-zamijenjenas:HRNENISO16212:2017

HRNENISO18415:2011enKozmetika – Mikrobiologija – Dokazivanje specifičnihi nespecifičnih mikroorganizama (ISO 18415:2007; ENISO18415:2011)Cosmetics – Microbiology – Detection of specifiedand non-specified microorganisms (ISO 18415:2007; ENISO18415:2011)-zamijenjenas:HRNENISO18415:2017

HRNENISO21148:2010enKozmetika –Mikrobiologija –Opće upute zamikrobiološkaispitivanja(ISO21148:2005;ENISO21148:2009)Cosmetics – Microbiology – General instructions formicrobiologicalexamination(ISO21148:2005;ENISO21148:2009)-zamijenjenas:HRNENISO21148:2017

HRNENISO21149:2010enKozmetika–Mikrobiologija–Brojenjeidokazivanjeaerobnihmezofilnihbakterija(ISO21149:2006;ENISO21149:2009)Cosmetics – Microbiology – Enumeration and detection of aerobicmesophilicbacteria(ISO21149:2006;ENISO21149:2009)-zamijenjenas:HRNENISO21149:2017

HZN/TO 218, Drvo

HRNEN14915:2013enZidneistropneoblogeodcjelovitogadrva–Značajke,ocjenasukladnostiioznačivanje(EN14915:2013)Solid wood panelling and cladding – Characteristics,evaluationofconformityandmarking(EN14915:2013)-zamijenjenas:HRNEN14915:2017


HRNEN1471:2004enTekstilne podne obloge – Ocjena promjene izgleda (EN1471:1996)Textilefloorcoverings–Assessmentofchangesinappearance(EN1471:1996)-zamijenjenas:HRNENISO9405:2017

HRNEN1471:2004/A1:2008enTekstilne podne obloge – Ocjena promjene izgleda (EN1471:1996/A1:2003)Textilefloorcoverings–Assessmentofchangesinappearance(EN1471:1996/A1:2003)-zamijenjenas:HRNENISO9405:2017

HZN/TO 502, Plinski uređaji

HRNEN297/A4:2005enPlinski kotlovi za centralno grijanje – Kotlovi vrsteB11 i B11BS s atmosferskim plamenicima i nazivnimtoplinskim opterećenjem jednakim ili manjim od 70 kW (EN297:1994/A4:2004)Gas-firedcentralheatingboilers–TypeBboilers fittedwithatmospheric burners of nominal heat input not exceeding 70kW(EN297:1994/A4:2004)-zamijenjenas:HRNEN15502-2-2:2014

HRNEN297/A6:2004enPlinski kotlovi za centralno grijanje – Kotlovi vrsteB11 i B11BS s atmosferskim plamenicima i nazivnimtoplinskim opterećenjem jednakim ili manjim od 70 kW (EN297:1994/A6:2003)Gas-fired central heating boilers – Type B11 and B11BSboilers,fittedwithatmosphericburnersofnominalheatinputnotexceeding70kW(EN297:1994/A6:2003)-zamijenjenas:HRNEN15502-2-2:2014

HRNEN297:2000enPlinski kotlovi za centralno grijanje – Kotlovi vrsteB11 i B11BS s atmosferskim plamenicima i nazivnimtoplinskim opterećenjem jednakim ili manjim od 70 kW (EN297:1994+A2:1996+A3:1996+A5:1998)Gas-fired central heating boilers – Type B11 and B11BSboilersfittedwithatmosphericburnersofnominalheatinputnotexceeding70kW(EN297:1994+A2:1996+A3:1996+A5:1998)-zamijenjenas:HRNEN15502-2-2:2014

HRNEN297:2000/A2:2000/Ispr.1:2008enPlinski kotlovi za centralno grijanje – Kotlovi vrsteB11 i B11BS s atmosferskim plamenicima i nazivnimtoplinskim opterećenjem jednakim ili manjim od 70 kW (EN297:1994/A2:1996/AC:2006)Gas-fired central heating boilers – Type B11 and B11BSboilersfittedwithatmosphericburnersofnominalheatinputnotexceeding70kW(EN297:1994/A2:1996/AC:2006)-zamijenjenas:HRNEN15502-2-2:2014

HRNEN625:2000enPlinski kotlovi za centralno grijanje – Posebni zahtjevi za pripremuvrućesanitarnevodekodkombi-kotlovasnazivnimtoplinskim opterećenjem jednakim ili manjim od 70 kW (EN625:1995)Gas-firedcentralheatingboilers–Specificrequirementsforthe domestic hot water operation of combination boilers ofnominalheatinputnotexceeding70kW(EN625:1995)-zamijenjenas:HRNEN15502-2-2:2014

HRNEN677:2000enPlinski kotlovi za centralno grijanje – Posebni zahtjevi za kondenzacijskekotlovesnazivnim toplinskimopterećenjemjednakimilimanjimod70kW(EN677:1998)Gas-firedcentralheatingboilers–Specificrequirementsforcondensingboilerswithanominalheat inputnotexceeding(EN677:1998)-zamijenjenas:HRNEN15502-2-2:2014

HRNEN1643:2004enVentilski nadzorni sustavi za automatske zaporne ventile za plinskeplamenikeiplinskeuređaje(EN1643:2000)Valveprovingsystemsforautomaticshut-offvalvesforgasburnersandgasappliances(EN1643:2000)-zamijenjenas:HRNEN1643:2014

HRNEN15417:2008enPlinski kotlovi za centralno grijanje – Posebni zahtjevi za kondenzacijskekotlovesnazivnim toplinskimopterećenjemvećimod70kWalinevećimod1000KW(EN15417:2006)Gas-firedcentralheatingboilers–Specificrequirementsforcondensing boilers with a nominal heat input greater than 70kWbutnotexceeding1000kW(EN15417:2006)-zamijenjenas:HRNEN15502-2-2:2014


HRNENISO16120-1:2012enValjanažicaodnelegiranogčelikazavučenjeužicu–1.dio:Općizahtjevi(ISO16120-1:2011;ENISO16120-1:2011)Non-alloysteelwirerodforconversiontowire–Part1:Generalrequirements(ISO16120-1:2011;ENISO16120-1:2011)-zamijenjenas:HRNENISO16120-1:2017

HRNENISO16120-4:2012enValjanažicaodnelegiranogčelikazavučenjeužicu–4.dio: Posebni zahtjevi za valjanu žicu za posebnu primjenu (ISO16120-4:2011;ENISO16120-4:2011)Non-alloy steel wire rod for conversion to wire – Part 4:Specific requirements for wire rod for special applications(ISO16120-4:2011;ENISO16120-4:2011)-zamijenjenas:HRNENISO16120-4:2017


HRNEN15257:2007enKatodna zaštita – Razine osposobljenosti i potvrđivanjeosobljakojesebavikatodnomzaštitom(EN15257:2006)Cathodicprotection–Competencelevelsandcertificationofcathodicprotectionpersonnel(EN15257:2006)-zamijenjenas:HRNENISO15257:2017



HRNENISO16664:2008enAnaliza plina – Postupanje s plinovima i plinskim smjesama za umjeravanje–Upute(ISO16664:2004;ENISO16664:2008)Gasanalysis–Handlingofcalibrationgasesandgasmixtures–Guidelines(ISO16664:2004;ENISO16664:2008)-zamijenjenas:HRNENISO16664:2017

HZN/TO 530, Čelična užad, lanci, dizalične kuke, trake, omče i pribor

HRNISO606:2004enKratkočlanipogonskipreciznivaljčastiituljčastilanci,nosivespojniceipripadajućilančanici(ISO606:2004)Short-pitch transmission precision roller and bush chains, attachmentsandassociatedchainsprockets(ISO606:2004)-zamijenjenas:HRNISO606:2017

HRNISO4347:2004enPločastilanci,priključniciiglatkilančanici–Dimenzije,mjernesileiprekidnačvrstoća(ISO4347:2004)Leafchains,clevisesandsheaves–Dimensions,measuringforcesandtensilestrengths(ISO4347:2004)-zamijenjenas:HRNISO4347:2017

HRNISO15654:2004enMetodaispitivanjadinamičkeizdržljivostipogonskihpreciznihvaljčastihlanaca(ISO15654:2004)Fatigue testmethod for transmissionprecision rollerchains(ISO15654:2004)-zamijenjenas:HRNISO15654:2017


HRNENISO294-1:2004enPlastika – Injekcijsko prešani ispitci plastomernih materijala – 1. dio:Opća načela i prešanje višenamjenskihispitaka i štapića (ISO 294-1:1996+Amd 1:2001; ENISO294-1:1998+A1:2002)Plastics – Injection moulding of test specimensof thermoplastic materials – Part 1: Generalprinciples, and moulding of multipurpose and bartest specimens (ISO 294-1:1996+Amd 1:2001; ENISO294-1:1998+A1:2002)-zamijenjenas:HRNENISO294-1:2017

HRNENISO5659-2:2013enPlastika – Stvaranje dima – 2. dio: Određivanje optičkegustoće jednokomornim ispitivanjem (ISO 5659-2:2012; ENISO5659-2:2012)Plastics – Smoke generation – Part 2: Determination ofoptical density bya single-chamber test (ISO5659-2:2012; ENISO5659-2:2012)-zamijenjenas:HRNENISO5659-2:2017

HRNENISO6806:2014enGumena crijeva i crijevni uređaji za upotrebu u naftnimplamenicima–Specifikacija(ISO6806:2014;ENISO6806:2014)Rubber hoses and hose assemblies for use in oil burners–Specification(ISO6806:2014;ENISO6806:2014)-zamijenjenas:HRNENISO6806:2017


HRNEN12697-18:2004enBitumenske mješavine – Ispitne metode za asfaltproizvedenvrućimpostupkom–18.dio:Ocjeđivanjeveziva (EN12697-18:2004)Bituminous mixtures – Test methods for hot mix asphalt –Part18:Binderdrainage(EN12697-18:2004)-zamijenjenas:HRNEN12697-18:2017

HRNEN14187-1:2004enHladnebrtvenemase–1.dio:Ispitnametodazaodređivanjebrzineotvrdnjivanja(EN14187-1:2003)Cold applied joint sealants – Part 1:Test method for thedeterminationofrateofcure(EN14187-1:2003)-zamijenjenas:HRNEN14187-1:2017


HRNEN13141-3:2008enVentilacija u zgradama – Ispitivanje značajki dijelova/proizvodazaventilacijustambenihzgrada–3.dio:Otsisnenapezastanove(EN13141-3:2004)Ventilationforbuildings–Performancetestingofcomponents/productsforresidentialventilation–Part3:Rangehoodsforresidentialuse(EN13141-3:2004)-zamijenjenas:HRNEN13141-3:2017

HRNEN15239:2008enVentilacija u zgradama – Energijske značajke zgrada– Smjernice za provjeru ventilacijskih sustava (EN15239:2007)Ventilation for buildings – Energy performance ofbuildings –Guidelines for inspection of ventilation systems (EN15239:2007)-zamijenjenas:HRNEN16798-17:2017

HRNEN15240:2008enVentilacija u zgradama – Energijske značajke zgrada– Smjernice za provjeru sustava pripreme zraka (EN15240:2007)Ventilation for buildings – Energy performance of buildings– Guidelines for inspection of air-conditioning systems (EN15240:2007)-zamijenjenas:HRNEN16798-17:2017

HRNEN15242:2008enVentilacijau zgradama–Metodeproračunazaodređivanjeprotoka zraka u zgradama uključujući infiltraciju (EN15242:2007)Ventilation for buildings – Calculation methods for thedeterminationofairflowratesinbuildingsincludinginfiltration(EN15242:2007)-zamijenjenas:HRNEN16798-7:2017

HRNEN15243:2008enVentilacijauzgradama–Proračuntemperatura,opterećenjai energije u prostorijama zgrada sa sustavima klimatizacije prostora(EN15243:2007)Ventilation forbuildings–Calculationof room temperaturesandof loadandenergyforbuildingswithroomconditioningsystems(EN15243:2007)-zamijenjenas:HRICEN/TR16798-14:2017,HRNEN16798-13:2017,HRNEN16798-9:2017

HZN/TO 550, Opskrba vodom

HRNEN1017:2014enKemikalijekojeseupotrebljavajuuobradivodenamijenjeneljudskojpotrošnji–Polužarenidolomit(EN1017:2014)Chemicals used for treatment ofwater intended for humanconsumption–Half-burntdolomite(EN1017:2014)-zamijenjenas:HRNEN1017:2017

HZN/TO 551, Gradnja

HRNENISO10563:2008enGradnja zgrada – Brtvila – Određivanje promjene mase iobujma(ISO10563:2005;ENISO10563:2005)Buildingconstruction–Sealants–Determinationofchangeinmassandvolume(ISO10563:2005;ENISO10563:2005)-zamijenjenas:HRNENISO10563:2017


HRNEN1384:2012enKacigezajahačkeakrobatskeaktivnosti(EN1384:2012)Helmetsforequestrianactivities(EN1384:2012)-zamijenjenas:HRNEN1384:2017


HRNEN1439:2008enOprema i pribor za UNP – Postupak provjere boca za UNP prije,tijekominakonpunjenja(EN1439:2008)LPG equipment and accessories – Procedure for checkingLPGcylindersbefore,duringandafterfilling(EN1439:2008)-zamijenjenas:HRNEN1439:2017

A�4 HZN - Oglasnik za normativne dokumente 7/�017 • Rezultati hrvatske normizacije

HRNEN1860-1:2013enAparati, kruta goriva i sredstva za potpalu za roštiljanje –1.dio:Roštiljinakrutagoriva–Zahtjeviimetodeispitivanja(EN1860-1:2013)Appliances, solid fuels and firelighters for barbecueing –Part1:Barbecuesburningsolidfuels–Requirementsandtestmethods(EN1860-1:2013)-zamijenjenas:HRNEN1860-1:2017

HRNEN13952:2003enBocezaUNP–Postupcipunjenja(EN13952:2003)LPGcylinders–Fillingprocedures(EN13952:2003)-zamijenjenas:HRNEN13952:2017

HRNEN13952:2003/A1:2008enOprema i pribor za UNP – Postupci punjenja UNP boca (EN13952:2003/A1:2006)LPGequipmentandaccessories–FillingproceduresforLPGcylinders(EN13952:2003/A1:2006)-zamijenjenas:HRNEN13952:2017

HZN/TO Z2, Ocjenjivanje sukladnosti i akreditacija

HRSISO/PAS17001:2008enOcjenjivanjesukladnosti–Nepristranost–Načela izahtjevi(ISO/PAS17001:2005)Conformity assessment – Impartiality – Principles andrequirements(ISO/PAS17001:2005)- bez zamjene

HRSISO/PAS17002:2008enOcjenjivanje sukladnosti – Tajnost – Načela i zahtjevi (ISO/PAS17002:2004)Conformity assessment – Confidentiality – Principles andrequirements(ISO/PAS17002:2004)- bez zamjene

HRSISO/PAS17003:2008enOcjenjivanjesukladnosti–Prigovoriiprizivi–Načelaizahtjevi(ISO/PAS17003:2004)Conformityassessment–Complaintsandappeals–Principlesandrequirements(ISO/PAS17003:2004)- bez zamjene

HRSISO/PAS17004:2008enOcjenjivanjesukladnosti–Otkrivanje informacija–Načela izahtjevi(ISO/PAS17004:2005)Conformity assessement – Disclosure of information –Principlesandrequirements(ISO/PAS17004:2005)- bez zamjene

HRSISO/PAS17005:2010enOcjenjivanje sukladnosti – Upotreba sustava upravljanja –Načelaizahtjevi(ISO/PAS17005:2008)Conformity assessment – Use of management systems –Principlesandrequirements(ISO/PAS17005:2008)- bez zamjene


HRNEN15163:2008enStrojevi i uređaji za iskorištavanje i obradu prirodnogkamena – Sigurnosni zahtjevi za pile s dijamantnom sajlom (EN15163:2008)Machinesandinstallationsfortheexploitationandprocessingofnatural stone–Safety–Requirements fordiamondwiresaws(EN15163:2008)-zamijenjenas:HRNEN15163:2017


HRNENISO11609:2011enStomatologija – Zubne paste – Zahtjevi, metode ispitivanja i označivanje(ISO11609:2010;ENISO11609:2010)Dentistry – Dentifrices – Requirements, test methods andmarking(ISO11609:2010;ENISO11609:2010)-zamijenjenas:HRNENISO11609:2017


HRNEN2714-013:2008enNizoviozrakoplovstvu–Kabeli,električni,jednožilniivišežilniza opću upotrebu – Radna temperatura između –55 °C i 260 °C – 013. dio: DR porodica, Oklopljeni (spiralni) iobloženi,ispisivanjepomoćuUVlasera–Normazaproizvod (EN2714-013:2005)Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 013: DR family, screened(spiral) and jacketed, UV laser printable – Product standard (EN2714-013:2005)-zamijenjenas:HRNEN2714-013:2017

HRNEN2997-001:2011enNizovi o zrakoplovstvu – Spojnice, električne, kružne,opremljene s navojnim prstenom, otporne na vatru ili neotporne na vatru, radne temperature -65 °C do 175 °Cneprekidno, 200 °C neprekidno, 260 °C vršno – 001. dio:Tehničkaspecifikacija(EN2997-001:2011)Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant,operatingtemperatures-65°Cto175°Ccontinuous,200°Ccontinuous,260°Cpeak–Part001:Technicalspecification (EN2997-001:2011)-zamijenjenas:HRNEN2997-001:2017

HRNEN4072:2016/Ispr.1:2017enZrakoplovstvo–Vijci,sa100°upuštenomnormalnomglavom,s ujednačenim križnim urezom, normalnog struka usketolerancije, kratkog navoja, od legure titana, prevučeni IVDaluminijem–Klasifikacija:1100MPa(pritemperaturiokoline)/425°C(EN4072:2016/AC:2017)Aerospaceseries–Screws,100°countersunknormalhead,offsetcruciform recess,close toleranceshank,short threadin titanium alloy, aluminium IVD coated – Classification: 1100MPa(atambienttemperature)/425°C(EN4072:2016/AC:2017)-zamijenjenas:HRNEN4072:2016/Ispr.2:2017

HRNEN4674-003:2015enZrakoplovstvo–Električnikabeli,ugradnja–Samoomatajuća,oklopljena(EMI)zaštitnanavlaka–Dio003:Otvorenanavlaka–Unutarnjepodručjepodkontroliranimtlakom–EMIzaštita5kA–Temperaturnirasponod-65°Cdo200°C–Normazaproizvod(EN4674-003:2015)Aerospace series – Electrical cables, installation – Self-wrappingshielding(EMI)protectivesleeve–Part003:Opensleeve – Inside pressurized area – EMI protection 5 kA –Temperature range -65 °C to 200 °C–Product standard (EN4674-003:2015)-zamijenjenas:HRNEN4674-003:2017

1.6IspravcihrvatskihnormaU popisima hrvatskih norma objavljenim u ranijim brojevima službenogglasilapotkralesusepogreške.Niženavodimoispravneoznake i naslove hrvatskih norma. Navedeni ispravci smatraju se službenom informacijom i nisu nužno uključeni u norme koje suprethodno objavljene.

HZN/TO 23, Traktori i strojevi za poljoprivredu i šumarstvo

• umjestoHRNISO11784:2006

Radio-frekvencijskooznačavanježivotinja–Strukturakoda(ISO11784:1996+Amd1:2004)Radio-frequency identification of animals – Code structure(ISO11784:1996+Amd1:2004)

• treba bitiHRNISO11784:2006

Radiofrekvencijskaidentifikacijaživotinja–Strukturakoda(ISO11784:1996+Amd1:2004)Radio-frequency identification of animals – Code structure(ISO11784:1996+Amd1:2004)


• umjestoHRNISO11785:2006

Radio-frekvencijska identifikacija životinja – Tehničkikoncept(ISO11785:1996)Radio-frequencyidentificationofanimals–Technicalconcept(ISO11785:1996)

• treba bitiHRNISO11785:2006

Radiofrekvencijska identifikacija životinja – Tehničkikoncept(ISO11785:1996)Radio-frequencyidentificationofanimals–Technicalconcept(ISO11785:1996)

HZN/TO 555, Medicinski proizvodi

• umjestoHRNENISO80369-6:2016

Spojnici malog promjera za tekućine i plinove koji seupotrebljavajuuzdravstvu–6.dio:Spojnicizaneuroaksijalnuprimjenu(ISO80369-6:2016,ispravljenaverzija2016-11-15;ENISO80369-6:2016)Small bore connectors for liquids and gases in healthcareapplications–Part6:Connectors forneuraxial applications(ISO 80369-6:2016, Corrected version 2016-11-15; ENISO80369-6:2016)

• treba bitiHRNENISO80369-6:2016

Spojnicimalog promjera za tekućine i plinovezaprimjenu u zdravstvu – 6. dio: Spojnici za neuroaksijalnu primjenu(ISO 80369-6:2016, ispravljena verzija 2016-11-15; ENISO80369-6:2016)Small bore connectors for liquids and gases in healthcareapplications–Part6:Connectors forneuraxial applications(ISO 80369-6:2016, Corrected version 2016-11-15; ENISO80369-6:2016)


• umjestoHRSCLC/TS50625-3-2:2016

Zahtjevizaprikupljanje,logistikuiobraduotpadneelektričneielektroničkeopreme(WEEE)–Dio3-2:Tehničkaspecifikacijazauklanjanjeonečišćenja–Svjetiljke(CLC/TS50625-3-2:2016)Collection, logistics & Treatment requirements for WEEE–Part 3-2:Technical specification for de-pollution–Lamps(CLC/TS50625-3-2:2016)

• treba bitiHRSCLC/TS50625-3-2:2016

Zahtjevizaprikupljanje,logistikuiobraduotpadneelektričneielektroničkeopreme(WEEE)–Dio3-2:Tehničkaspecifikacijazauklanjanjeonečišćenja–Žarulje(CLC/TS50625-3-2:2016)Collection, logistics & Treatment requirements for WEEE–Part 3-2:Technical specification for de-pollution–Lamps(CLC/TS50625-3-2:2016)

1.7Nasloviobjavljenihhrvatskihnormanahrvatskomejeziku

Te su hrvatske norme ranije objavljene samo s naslovima na engleskome jeziku pa se sada objavljuju njihovi naslovi na hrvatskome jeziku,kojinisunužnouključeniunormekojesuprethodnoobjavljene.Obavijestonaslovimanahrvatskome jezikusmatraseslužbenominformacijom.

HZN/TO E500, Elektromagnetska kompatibilnost u elektrotehnici i telekomunikacijama

HRNEN61000-4-14:2001/A2:2012Elektromagnetskakompatibilnost (EMC)–Dio4-14: Ispitnei mjerne tehnike – Ispitivanje otpornosti na kolebanje naponazaopremučijaulaznastrujaneprelazi16Apofazi (IEC61000-4-14:1999/am2:2009;EN61000-4-14:1999/A2:2009)Electromagneticcompatibility(EMC)–Part4-14:Testingandmeasurementtechniques–Voltagefluctuationimmunitytestforequipmentwithinputcurrentnotexceeding16Aperphase(IEC61000-4-14:1999/am2:2009;EN61000-4-14:1999/A2:2009)


HRNEN301178-1V1.2.1:2009Elektromagnetska kompatibilnost i radijski spektar (ERM) – Prenosiva VHF radiotelefonska oprema za pomorskupokretnu službu u VHF pojasevima (samo za ne-GMDSSprimjene) – Tehničke karakteristike i metode ispitivanja (EN301178-1V1.2.1:2003)Electromagnetic compatibility and Radio spectrum Matters (ERM) – Portable Very High Frequency (VHF) radiotelephone equipment for themaritimemobile service operating in theVHF bands (for non-GMDSS applications only) – Part 1:Technical characteristics and methods of measurement (EN301178-1V1.2.1:2003)

HRNEN301178-1V1.3.1:2009Elektromagnetska kompatibilnost i radijski spektar (ERM) – Prenosiva VHF radiotelefonska oprema za pomorskupokretnu službu u VHF pojasevima (samo za ne-GMDSSprimjene) – Tehničke karakteristike i metode ispitivanja (EN301178-1V1.3.1:2007)Electromagnetic compatibility and Radio spectrum Matters (ERM) – Portable Very High Frequency (VHF) radiotelephone equipment for themaritimemobile service operating in theVHF bands (for non-GMDSS applications only) – Part 1:Technical characteristics and methods of measurement (EN301178-1V1.3.1:2007)

HRNEN301357V1.1.1:2009Elektromagnetska kompatibilnost i radiospektar (ERM) –Tehničke značajke i ispitnemetode za analogne bežičneširokopojasne audionaprave sa ugrađenim antenama kojerade u propisanom CEPT frekvencijskom području od 863MHzdo865MHz(EN301357V1.1.1:1999)ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM) – Technical characteristics and test methods foranalogue cordless wideband audio devices using integralantennas operating in the CEPT recommended 863 MHz to 865MHzfrequencyrange(EN301357V1.1.1:1999)

HRNEN301357-1V1.1.2:2009Elektromagnetska kompatibilnost i radiospektar (ERM) –Analognebežičneširokopojasneaudionapravesaugrađenimantenama koje rade u propisanom CEPT frekvencijskompodručjuod863MHzdo865MHz–1.dio:Tehničkeznačajkeiispitnemetode(EN301357-1V1.1.2:2000)ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM) – Analogue cordless wideband audiodevices using integral antennas operating in the CEPT recommended 863 MHz to 865 MHz frequency range – Part 1: Technical characteristics and test methods (EN301357-1V1.1.2:2000)

HRNEN301357-1V1.3.1:2009Elektromagnetska kompatibilnost i radiospektar (ERM) – Bežične audionaprave u području od 25 MHz to 2 000 MHz – 1. dio: Tehničke značajke i ispitne metode (EN301357-1V1.4.1:2008)Electromagnetic compatibility and Radio spectrum Matters (ERM) – Cordless audio devices in the range �5 MHz to 2000MHz–Part1:Technicalcharacteristicsandtestmethods(EN301357-1V1.3.1:2006)

HRNEN301357-1V1.4.1:2009Elektromagnetska kompatibilnost i radiospektar (ERM) – Bežične audionaprave u području od 25 MHz to 2 000 MHz – 1. dio: Tehničke značajke i ispitne metode (EN301357-1V1.4.1:2008)Electromagnetic compatibility and Radio spectrum Matters (ERM) – Cordless audio devices in the range �5 MHz to 2000MHz–Part1:Technicalcharacteristicsandtestmethods(EN301357-1V1.4.1:2008)

A26HZN-Oglasnikzanormativnedokumente7/2017•Rezultatimeđunarodneieuropskenormizacije

2 Rezultatimeđunarodneieuropskenormizacijerazvrstanipopredmetnomustroju

01.040.17 Mjeriteljstvoimjerenje.Fizikalne pojave(Rječnici)EuropskanormizacijaCENELEC

EN60051-1:2017Direct acting indicating analogue electrical measuring instruments and their accessories –Part 1:Definitions andgeneral requirements common to all parts (IEC 60051-1:2016)

MeđunarodnanormizacijaISO

ISO18405:2017Underwateracoustics–Terminology

01.040.25 Proizvodnatehnika(Rječnici)EuropskanormizacijaCENELEC

EN61511-1:2017Functional safety – Safety instrumented systems for the process industry sector – Part 1: Framework, definitions,system,hardwareandapplicationprogrammingRequirements(IEC61511-1:2016+Cor1:2016)

01.040.35 Informacijskatehnologija.Uredski strojevi(Rječnici)EuropskanormizacijaCENELEC

EN61511-1:2017Functionalsafety–Safetyinstrumentedsystemsfortheprocessindustry sector – Part 1: Framework, definitions, system,hardware and application programming Requirements (IEC61511-1:2016+Cor1:2016)

01.040.91 Konstrukcijskimaterijaliigradnja (Rječnici)EuropskanormizacijaCEN

EN13967:2012+A1:2017Flexiblesheetsforwaterproofing–Plasticandrubberdampproofsheets includingplasticand rubberbasement tankingsheet–Definitionsandcharacteristics

03.080.99 OstaleuslugeMeđunarodnanormizacijaISO

ISO18587:2017Translation services – Post-editing of machine translationoutput – Requirements

03.100.10 Nabava.Opskrba.LogistikaMeđunarodnanormizacijaISO

ISO20400:2017Sustainableprocurement–Guidance

03.100.30 UpravljanjeljudskimresursimaMeđunarodnanormizacijaISO/IEC

ISO/IECTR19788-11:2017Information technology – Learning, education and training–Metadatafor learningresources–Part11:MigrationfromLOM to MLR

03.100.40 IstraživanjeirazvojMeđunarodnanormizacijaISO

ISO21505:2017Project, programmeand portfoliomanagement –Guidanceon governance

03.100.70 SustaviupravljanjaMeđunarodnanormizacijaISO

ISO10007:2017Quality management – Guidelines for configurationmanagement

ISO/IEC27003:2017Information technology –Security techniques – Informationsecuritymanagementsystems–Guidance

IEC


03.120.10 Upravljanjekvalitetomi osiguravanjekvaliteteMeđunarodnanormizacijaISO

ISO10007:2017Quality management – Guidelines for configurationmanagement

03.120.30 PrimjenastatističkihmetodaMeđunarodnanormizacijaISO

ISO7870-8:2017Control charts –Part 8:Charting techniques for short runsandsmallmixedbatches

03.220.01 PrijevozopćenitoMeđunarodnanormizacijaISO

ISO24102-1:2013/Amd1:2017Intelligent transport systems – Communications access forlandmobiles (CALM) – ITS stationmanagement – Part 1:Localmanagement;Amendment1

ISO24102-3:2013/Amd1:2017Intelligent transport systems – Communications access forlandmobiles (CALM) – ITS stationmanagement – Part 3:Serviceaccesspoints;Amendment1

ISO24102-5:2013/Amd1:2017Intelligent transport systems – Communications access forlandmobiles (CALM) – ITS stationmanagement – Part 5:Fastserviceadvertisementprotocol(FSAP);Amendment1

ISO29281-1:2013/Amd1:2017Intelligent transport systems – Communication access forland mobiles (CALM) – Non-IP networking – Part 1: Fastnetworking&transportlayerprotocol(FNTP);Amendment1

HZN-Oglasnikzanormativnedokumente7/2017•Rezultatimeđunarodneieuropskenormizacije A27

07.100.30 MikrobiologijahraneMeđunarodnanormizacijaISO

ISO10273:2017Microbiology of the food chain –Horizontalmethod for thedetectionofpathogenicYersiniaenterocolitica

ISO16654:2001/Amd1:2017Microbiologyof foodandanimal feedingstuffs–Horizontalmethod for the detection of Escherichia coli O157 –Amendment1:AnnexB:Resultofinterlaboratorystudies

ISO22964:2017Microbiology of the food chain –Horizontalmethod for thedetectionofCronobacterspp.

11.040.40 Implantatizakirurgiju,protetikui ortotikuMeđunarodnanormizacijaISO

ISO14708-3:2017Implants for surgery – Active implantable medical devices–Part3:Implantableneurostimulators

11.040.70 OftalmološkaopremaMeđunarodnanormizacijaISO

ISO11979-8:2017Ophthalmic implants – Intraocular lenses – Part 8:Fundamental requirements

ISO/TR22979:2017Ophthalmic implants – Intraocular lenses – Guidance onassessmentoftheneedforclinicalinvestigationofintraocularlensdesignmodifications

11.060.20 StomatološkaopremaMeđunarodnanormizacijaISO

ISO9873:2017Dentistry – Intra-oral mirrors

11.100.20 Biološkovrednovanjemedicinskih proizvodaMeđunarodnanormizacijaISO

ISO10993-4:2017Biologicalevaluationofmedicaldevices–Part4:Selectionoftestsforinteractionswithblood

11.120.10 LijekoviMeđunarodnanormizacijaISO

ISO19610:2017Traditional Chinese medicine – General requirements forindustrial manufacturing process of red ginseng (Panaxginseng C.A. Meyer)

11.180.01 Pomagalazaosobesinvaliditetom općenitoEuropskanormizacijaCEN

EN16586-1:2017Railwayapplications–DesignforPRMuse–Accessibilityofpersonswithreducedmobilitytorollingstock–Part1:Stepsforaccessandegress

EN16586-2:2017Railway applications – Design for PRM use –Accessibilityof persons with reduced mobility to rolling stock – Part 2:Boardingaids

11.180.15 Pomagalazagluheiosobe oštećenogsluhaMeđunarodnanormizacijaIEC

IECTR63079:2017Codeofpracticeforhearing-loopsystems(HLS)

13.020.20 EkogospodarstvoMeđunarodnanormizacijaISO

ISO20400:2017Sustainableprocurement–Guidance

13.040.50 Emisijeplinovaizprijevoznih sredstavaMeđunarodnanormizacijaISO

ISO8178-1:2017Reciprocating internal combustion engines – Exhaustemission measurement – Part 1: Test-bed measurementsystemsofgaseousandparticulateemissions

ISO8178-4:2017Reciprocating internal combustion engines – Exhaustemissionmeasurement–Part4:Steady-stateandtransienttestcyclesfordifferentengineapplications

13.060.45 Ispitivanjevodeopćenito (uključujućiuzorkovanje)MeđunarodnanormizacijaISO

ISO5667-16:2017Waterquality–Sampling–Part16:Guidanceonbiotestingofsamples

13.140 UtjecajbukenaljudeMeđunarodnanormizacijaIEC

IEC61252:1993/Amd2:2017Amendment2–Electroacoustics–Specificationsforpersonalsoundexposuremeters

IEC61252:1993+Amd1:2000+Amd2:2017Electroacoustics–Specificationsforpersonalsoundexposuremeters

13.160 UtjecajvibracijaiudaranaljudeMeđunarodnanormizacijaISO

ISO28927-1:2009/Amd1:2017Hand-heldportablepowertools–Testmethodsforevaluationof vibration emission – Part 1:Angle and vertical grinders–Amendment1:Cuppedwirebrushes

13.180 ErgonomijaMeđunarodnanormizacijaISO

ISO9241-333:2017Ergonomics of human-system interaction – Part 333:Stereoscopic displays using glasses


13.220.40 Zapaljivostiponašanjematerijalai proizvodapriizgaranjuMeđunarodnanormizacijaISO

ISO4589-1:2017Plastics – Determination of burning behaviour by oxygenindex–Part1:Generalrequirements

ISO4589-2:2017Plastics – Determination of burning behaviour by oxygenindex–Part2:Ambient-temperaturetest

ISO4589-3:2017Plastics – Determination of burning behaviour by oxygenindex–Part3:Elevated-temperaturetest

13.220.50 Vatrootpornostgrađevnih materijalaielemenataEuropskanormizacijaCEN

EN1366-10:2011+A1:2017Fireresistancetestsforserviceinstallations–Part10:Smokecontrol dampers

13.260 Zaštitaodelektričnogudara.Rad podnaponomMeđunarodnanormizacijaIEC

IECTR61328:2017Liveworking–Guidelinesfortheinstallationoftransmissionanddistribution lineconductorsandearthwires–Stringingequipment and accessory item

17.020 MjeriteljstvoimjerenjeopćenitoMeđunarodnanormizacijaISO

ISO21748:2017Guidance for the use of repeatability, reproducibility andtrueness estimates in measurement uncertainty evaluation

17.140.01 Akustičkamjerenjaismanjenje bukeopćenitoMeđunarodnanormizacijaISO

ISO3745:2012/Amd1:2017Acoustics – Determination of sound power levels andsoundenergylevelsofnoisesourcesusingsoundpressure–Precisionmethodsforanechoicroomsandhemi-anechoicrooms;Amendment1


ISO26101:2017Acoustics – Test methods for the qualification of free-fieldenvironments

17.140.20 Bukakojuproizvodestrojevii opremaMeđunarodnanormizacijaIEC

IEC60704-2-3:2017Householdandsimilarelectricalappliances–Testcode forthe determination of airborne acoustical noise – Part 2-3:Particularrequirementsfordishwashers

17.140.30 Bukakojuproizvodeprijevozna sredstvaMeđunarodnanormizacijaISO

ISO11819-2:2017Acoustics–Measurementoftheinfluenceofroadsurfacesontrafficnoise–Part2:Theclose-proximitymethod


ISO18406:2017Underwateracoustics–Measurementofradiatedunderwatersoundfrompercussivepiledriving

17.140.50 ElektroakustikaMeđunarodnanormizacijaIEC

IEC60500:2017Underwater acoustics – Hydrophones – Properties ofhydrophonesinthefrequencyrange1Hzto500kHz

IEC61252:1993/Amd2:2017Amendment2–Electroacoustics–Specificationsforpersonalsoundexposuremeters

IEC61252:1993+Amd1:2000+Amd2:2017Electroacoustics–Specificationsforpersonalsoundexposuremeters

IEC61260-2:2016/Amd1:2017Amendment 1 – Electroacoustics – Octave-band and fractional-octave band filters – Part 2: Pattern evaluationtests

IEC61260-2:2016+Amd1:2017Electroacoustics –Octave-band and fractional-octave bandfilters–Part2:Patternevaluationtests

IEC61672-2:2013/Amd1:2017Amendment 1 – Electroacoustics – Sound level meters –Part2:Patternevaluationtests

IEC61672-2:2013+Amd1:2017Electroacoustics – Sound level meters – Part 2: Patternevaluation tests

IECTR63079:2017Codeofpracticeforhearing-loopsystems(HLS)

17.220.20 Mjerenjeelektričnihimagnetskih veličinaEuropskanormizacijaCENELEC

EN60051-1:2017Direct acting indicating analogue electrical measuring instruments and their accessories –Part 1:Definitions andgeneral requirements common to all parts (IEC60051-1:2016)

EN62052-11:2003/A1:2017Electricitymeteringequipment(AC)–Generalrequirements,tests and test conditions – Part 11: Metering equipment (IEC62052-11:2003/Amd1:2016)

EN62053-23:2003/A1:2017Electricity metering equipment (a.c.) – Particular requirements –Part23:Staticmetersforreactiveenergy(classes2and3)(IEC62053-23:2003/Amd1:2016)

EN62053-24:2015/A1:2017Electricity metering equipment (a.c.) – Particular requirements – Part 24: Static meters for reactive energyat fundamental frequency (classes 0,5 S, 1 S and 1) (IEC62053-24:2014/Amd1:2016)


19.120 Analizaveličinečestica.ProsijavanjeMeđunarodnanormizacijaISO

ISO20998-3:2017Measurement and characterization of particles by acousticmethods–Part3:Guidelinesfornon-lineartheory

21.100.10 KlizniležajeviMeđunarodnanormizacijaISO

ISO10129:2017Plain bearings–Testingof bearingmetals –Resistance tocorrosion by lubricants under static conditions

ISO12308:2017Plain bearings – Quality assurance of sample types –Definitions,applicationsandtesting

ISO13778:2017Plain bearings – Quality assurance of thin-walled halfbearings – Selective assembly of bearings to achieve anarrowclearancerange

21.100.20 ValjniležajeviMeđunarodnanormizacijaISO

ISO15243:2017Rollingbearings–Damageandfailures–Terms,characteristicsand causes

21.200 ZupčaniciMeđunarodnanormizacijaISO

ISO14104:2017Gears – Surface temper etch inspection after grinding,chemical method

21.220.10 Remenskipogoninjegovisastavni dijeloviMeđunarodnanormizacijaISO

ISO5295:2017Synchronous belts – Calculation of power rating and drivecentre distance

23.020.40 KriogeničkeposudeMeđunarodnanormizacijaISO

ISO23208:2017Cryogenicvessels–Cleanlinessforcryogenicservice

23.040.01 Cjevovodnesastavnidijelovii cjevovodiopćenitoEuropskanormizacijaCEN

EN13480-4:2012/A4:2017Metallicindustrialpiping–Part4:Fabricationandinstallation

EN13480-5:2012/A3:2017Metallicindustrialpiping–Part5:Inspectionandtesting

23.040.05 Cjevovodiidijelovizavanjske kanalizacijskesustaveEuropskanormizacijaCEN

EN752:2017Drainandsewersystemsoutsidebuildings–Sewersystemmanagement

23.100.01 Sustavizahidrauličkiipneumatski prijenosenergijeopćenitoMeđunarodnanormizacijaISO

ISO/TR16194:2017Pneumaticfluidpower–Assessmentofcomponentreliabilityby accelerated life testing – General guidelines andprocedures

23.100.99 Ostalisastavnidijelovisustavaza hidrauličniipneumatskiprijenos energijeEuropskanormizacijaCEN

EN14359:2017Gas-loadedaccumulatorsforfluidpowerapplications

25.040.01 Sustaviindustrijskeautomatizacije općenitoMeđunarodnanormizacijaISO

ISO20140-5:2017Automation systems and integration – Evaluating energy efficiency and other factors of manufacturing systemsthat influence the environment – Part 5: Environmentalperformanceevaluationdata

ISO22400-2:2014/Amd1:2017Automation systems and integration – Key performanceindicators (KPIs) formanufacturingoperationsmanagement–Part2:Definitionsanddescriptions–Amendment1:Keyperformanceindicatorsforenergymanagement

IEC

ISO20140-5:2017Automation systems and integration – Evaluating energy efficiency and other factors of manufacturing systemsthat influence the environment – Part 5: Environmentalperformanceevaluationdata

25.040.40 Mjerenjeiupravljanjeu industrijskimprocesimaEuropskanormizacijaCENELEC

EN61010-2-202:2017Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-202:Particular requirements for electrically operated valveactuators (IEC 61010-2-202:2016)

EN61511-1:2017Functional safety – Safety instrumented systems for the process industry sector – Part 1: Framework, definitions,system,hardwareandapplicationprogrammingRequirements(IEC 61511-1:2016+Cor1:2016)

EN61511-2:2017Functional safety – Safety instrumented systems for theprocessindustrysector–Part2:GuidelinesfortheapplicationofIEC61511-1(IEC 61511-2:2016)


EN61511-3:2017Functional safety – Safety instrumented systems for theprocessindustrysector–Part3:Guidanceforthedeterminationoftherequiredsafetyintegritylevels(IEC 61511-3:2016)

EN61987-11:2017Industrial-process measurement and control – Data structures and elements in -process equipment catalogues –Part 11: Lists of properties (LOPs) of measuring equipmentfor electronic data exchange – Generic structures (IEC 61987-11:2016)

EN61987-16:2017Industrial-process measurement and control – Data structures and elements in process equipment catalogues – Part 16:Listsofproperties (LOPs) fordensitymeasuringequipmentforelectronicdataexchange(IEC 61987-16:2016)

25.060.20 Diobeneisteznenapravezaalati obradakMeđunarodnanormizacijaISO

ISO26622-1:2017Modular taper interface with ball track system – Part 1:Dimensionsanddesignationofshanks

25.140.10 Pneumatski alatiMeđunarodnanormizacijaISO

ISO28927-1:2009/Amd1:2017Hand-heldportablepowertools–Testmethodsforevaluationof vibration emission – Part 1:Angle and vertical grinders–Amendment1:Cuppedwirebrushes

25.140.30 RučnopokretanialatiMeđunarodnanormizacijaISO

ISO4229:2017Assemblytoolsforscrewsandnuts–Single-headengineer’swrenches for lower torqueapplications–Maximumoutsidedimensionsofheadsandtesttorques

25.160.01 Zavarivanje,mekoitvrdolemljenje općenitoMeđunarodnanormizacijaISO

ISO19828:2017Welding for aerospace applications – Visual inspection ofwelds

25.160.20 Dodatniipotrošnimaterijaliza zavarivanjeMeđunarodnanormizacijaISO

ISO3580:2017Weldingconsumables–Coveredelectrodesformanualmetalarcweldingofcreep-resistingsteels–Classification

25.160.50 TvrdoimekolemljenjeEuropskanormizacijaCENELEC

EN62739-3:2017Testmethod forerosionofwavesolderingequipmentusingmoltenlead-freesolderalloy–Part3:Selectionguidanceoferosion test methods (IEC 62739-3:2017)

25.220.40 MetalneprevlakeMeđunarodnanormizacijaISO

ISO14713-1:2017Zinc coatings – Guidelines and recommendations for theprotection against corrosion of iron and steel in structures –Part1:Generalprinciplesofdesignandcorrosionresistance

ISO14713-3:2017Zinc coatings – Guidelines and recommendations for theprotection against corrosion of iron and steel in structures–Part3:Sherardizing

27.010 Tehnikaprijenosaenergijeitopline općenitoMeđunarodnanormizacijaIEC

IEC62325-451-4:2017Frameworkforenergymarketcommunications–Part451-4:Settlement and reconciliation business process, contextualandassemblymodelsforEuropeanmarket

27.015 Energijskaučinkovitost.Očuvanje energijeopćenitoEuropskanormizacijaCENELEC

CLC/TR50600-99-1:2017Information technology – Data centre facilities andinfrastructures – Part 99-1: Recommended practices forenergy management

27.020 MotorisunutrašnjimizgaranjemMeđunarodnanormizacijaISO

ISO8178-1:2017Reciprocating internal combustion engines – Exhaustemission measurement – Part 1: Test-bed measurementsystemsofgaseousandparticulateemissions

ISO8178-4:2017Reciprocating internal combustion engines – Exhaustemissionmeasurement–Part4:Steady-stateandtransienttestcyclesfordifferentengineapplications

27.070 GorivičlanciMeđunarodnanormizacijaIEC

IEC62282-4-102:2017Fuelcelltechnologies–Part4-102:Fuelcellpowersystemsforindustrialelectrictrucks–Performancetestmethods

27.160 SolarnaenergetikaEuropskanormizacijaCEN

EN15316-4-3:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 4-3: Heat generation systems, thermal solar andphotovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3

CEN/TR15316-6-1:2017Energy performance of buildings- Method for calculationof system energy requirements and system efficiencies – Part 6-1: Explanation and justification of EN 15316-1,Module M3-1, M3-4, M3-9, M8-1, M8-4


CEN/TR15316-6-6:2017Energy performance of buildings – Method for calculationof system energy performance and system efficiencies – Part 6-6: Explanation and justification of EN 15316-4-3,Module M3-8-3, M8-8-3

CEN/TR15316-6-7:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 6-7: Explanation and justification of EN 15316-4-4,Module M8-3-4, M8-8-4, M8-11-4

CEN/TR15316-6-9:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 6-9: Explanation and justification of EN 15316-4-8,Module M3-8-8

CENELEC

EN61215-2:2017Terrestrial photovoltaic (PV)modules –Design qualificationandtypeapproval–Part2:Testprocedures(IEC 61215-2:2016)

MeđunarodnanormizacijaIEC

IEC60364-7-712:2017Lowvoltageelectricalinstallations–Part7-712:Requirementsforspecialinstallationsorlocations–Solarphotovoltaic(PV)powersupplysystems

27.180 SustavivjetroagregataEuropskanormizacijaCENELEC

EN61400-25-6:2017Windenergygenerationsystems–Part25-6:Communicationsfor monitoring and control of wind power plants – Logicalnode classes and data classes for condition monitoring (IEC 61400-25-6:2016)

27.190 Biološki izvori i alternativni izvori energijeMeđunarodnanormizacijaISO

ISO14780:2017Solidbiofuels–Samplepreparation

ISO18125:2017Solidbiofuels–Determinationofcalorificvalue

ISO19743:2017Solidbiofuels–Determinationofcontentofheavyextraneousmaterials larger than 3,15 mm

29.030 MagnetnimaterijaliEuropskanormizacijaCENELEC

EN60404-8-6:2017Magnetic materials – Part 8-6: Specifications for individualmaterials–Softmagneticmetallicmaterials(IEC 60404-8-6:2016)

29.035.20 Plastičniigumeniizolacijski materijaliEuropskanormizacijaCENELEC

EN60674-3-8:2011/A1:2017Plastic films for electrical purposes –Part 3:Specificationsforindividualmaterials–Sheet8:Balancedbiaxiallyorientedpolyethylene naphthalate (PEN) films used for electricalinsulation (IEC 60674-3-8:2011/Amd1:2016)

29.060.10 ŽiceEuropskanormizacijaCENELEC

EN60317-67:2017Specificationsforparticulartypesofwindingwires–Part67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 (IEC 60317-67:2017)

EN60317-68:2017Specificationsforparticulartypesofwindingwires–Part68: Polyvinyl acetal enamelled rectangular aluminium wire, class 1�0 (IEC 60317-68:2017)

EN60317-69:2017Specificationsforparticulartypesofwindingwires–Part69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220 (IEC 60317-69:2017)

29.060.20 KabeliMeđunarodnanormizacijaIEC

IEC60287-2-3:2017Electriccables–Calculationofthecurrentrating–Part2-3:Thermal resistance – Cables installed in ventilated tunnels

29.080.30 IzolacijskisustaviEuropskanormizacijaCENELEC

EN61857-31:2017Electrical insulation systems – Procedures for thermalevaluation – Part 31: Applications with a designed life of 5 000 h or less (IEC 61857-31:2017)

29.100.10 MagnetskisastavnidijeloviEuropskanormizacijaCENELEC

EN62211:2017Inductive components – Reliability management (IEC 62211:2017)

29.120.10 ZaštitnecijevizaelektričnepotrebeMeđunarodnanormizacijaIEC

IEC61386-1:2008/AMD1:2017Conduit systems for cable management – Part 1: Generalrequirements

IEC61386-1:2008+AMD1:2017Conduit systems for cable management – Part 1: Generalrequirements

29.120.20 NapravezapovezivanjeMeđunarodnanormizacijaIEC

IEC60570:2003/AMD1:2017Amendment 1 – Electrical supply track systems forluminaires

IEC60570:2003+AMD1:2017Electricalsupplytracksystemsforluminaires

29.120.99 OstalielektričnipriborEuropskanormizacijaCENELEC

EN61242:1997/A13:2017Electricalaccessories–Cablereelsforhouseholdandsimilarpurposes


29.140.10 KapeidržačisvjetiljkiEuropskanormizacijaCENELEC

EN60061-1:1993/A55:2017Lamp caps and holders together with gauges for thecontrolofinterchangeabilityandsafety–Part1:Lampcaps (IEC 60061-1:1969/A55:2016)

EN60838-1:2017Miscellaneous lampholders –Part 1:General requirementsand tests (IEC 60838-1:2016)

EN60838-2-3:2017Miscellaneouslampholders–Part2-3:Particularrequirements– Lampholders for double-capped linear LED lamps (IEC 60838-2-3:2016)

29.140.30 Fluorescentnesvjetiljke.Svjetiljke sizbojemEuropskanormizacijaCENELEC

EN62532:2011/A1:2017Fluorescent induction lamps – Safety specifications (IEC 62532:2011/Amd1:2016)

29.140.40 RasvjetnatijelaMeđunarodnanormizacijaIEC



IEC60598-2-4:2017Luminaires – Part 2-4: Particular requirements – Portablegeneral purpose luminaire

29.140.50 RasvjetniinstalacijskisustaviMeđunarodnanormizacijaIEC



29.140.99 Ostalenormekojeseodnosena svjetiljkeEuropskanormizacijaCENELEC

EN61347-2-3:2011/A1:2017Lampcontrolgear–Part2-3:Particularrequirementsfora.c.and/or d.c. supplied electronic control gear for fluorescentlamps (IEC 61347-2-3:2011/Amd1:2016)

EN61347-2-13:2014/A1:2017Lamp controlgear – Part 2-13: Particular requirements ford.c.ora.c.suppliedelectroniccontrolgearforLEDmodules (IEC 61347-2-13:2014/Amd1:2016)

EN61995-1:2008/A1:2017Devices for the connection of luminaires for householdand similar purposes – Part 1: General requirements (IEC 61995-1:2005/Amd1:2016)

29.160.30 MotoriEuropskanormizacijaCENELEC

EN61800-5-1:2007/A1:2017Adjustablespeedelectricalpowerdrivesystems–Part5-1: Safety requirements – Electrical, thermal and energy (IEC 61800-5-1:2007/Amd1:2016)

EN61800-5-2:2017Adjustablespeedelectricalpowerdrivesystems–Part5-2:Safetyrequirements–Functional(IEC61800-5-2:2016)

29.180 Transformatori.PrigušniceEuropskanormizacijaCENELEC

EN62211:2017Inductive components – Reliability management (IEC 62211:2017)

29.200 Ispravljači.Pretvarači.Stabilizirano napajanjeEuropskanormizacijaCENELEC

EN62924:2017Railwayapplications–Fixedinstallations–StationaryenergystoragesystemforDCtractionsystems(IEC62924:2017)

29.220.01 GalvanskičlanciibaterijeopćenitoEuropskanormizacijaCENELEC

EN62281:2017Safetyof primaryandsecondary lithiumcells andbatteriesduring transport (IEC 62281:2016)

29.240.20 Vodovizaprijenosirazdiobu električneenergijeMeđunarodnanormizacijaIEC


29.240.99 Ostalaopremakojaseupotrebljava umrežamazaprijenosirazdiobu električneenergijeMeđunarodnanormizacijaIEC

IEC61954:2011/Amd2:2017Amendment2–Staticvarcompensators(SVC)–Testingofthyristor valves

IEC61954:2011+Amd1:2013+Amd2:2017Staticvarcompensators(SVC)–Testingofthyristorvalves

29.260.20 Električniuređajizaeksplozivnu atmosferuEuropskanormizacijaCENELEC

EN60079-30-1:2017Explosive atmospheres – Part 30-1: Electrical resistancetrace heating – General and testing requirements (IEC/IEEE 60079-30-1:2015,modified)


29.260.99 Ostalaelektričnaopremazaradu posebnimuvjetimaMeđunarodnanormizacijaIEC


29.280 OpremazaelektričnuvučuEuropskanormizacijaCENELEC

EN62924:2017Railwayapplications–Fixedinstallations–StationaryenergystoragesystemforDCtractionsystems(IEC 62924:2017)

31.060.70 EnergetskikondenzatoriMeđunarodnanormizacijaIEC

IEC60143-1:2015/COR1:2017Corrigendum1–Seriescapacitorsforpowersystems–Part1: General

31.080.01 PoluvodičkenapraveopćenitoMeđunarodnanormizacijaIEC

IEC60749-5:2017Semiconductor devices – Mechanical and climatic test methods–Part5:Steady-statetemperaturehumiditybiaslifetest

IEC62951-1:2017Semiconductor devices – Flexible and stretchablesemiconductor devices – Part 1: Bending test method forconductivethinfilmsonflexiblesubstrates

31.080.20 TiristoriMeđunarodnanormizacijaIEC

IEC61954:2011/Amd2:2017Amendment2–Staticvarcompensators(SVC)–Testingofthyristor valves

IEC61954:2011+Amd1:2013+Amd2:2017Staticvarcompensators(SVC)–Testingofthyristorvalves

31.140 PiezoelektričnenapraveEuropskanormizacijaCENELEC

EN60444-8:2017Measurement of quartz crystal unit parameters – Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2016)

31.180 TiskanikrugoviipločiceMeđunarodnanormizacijaIEC

IEC61188-7:2017Printed boards and printed board assemblies – Design and use–Part7:ElectroniccomponentzeroorientationforCADlibrary construction

31.190 Sklopovielektroničkihsastavnih dijelovaMeđunarodnanormizacijaIEC

IEC61188-7:2017Printed boards and printed board assemblies – Design and use–Part7:ElectroniccomponentzeroorientationforCADlibrary construction

IEC62090:2017Productpackagelabelsforelectroniccomponentsusingbarcodeandtwo-dimensionalsymbologies

31.200 Integriranikrugovi. MikroelektronikaEuropskanormizacijaCENELEC

EN62435-1:2017Electronic components – Long-term storage of electronicsemiconductordevices–Part1:General(IEC 62435-1:2017)

EN62435-2:2017Electronic components – Long-term storage of electronicsemiconductor devices –Part 2:Deteriorationmechanisms(IEC 62435-2:2017)

EN62435-5:2017Electronic components – Long-term storage of electronicsemiconductor devices – Part 5: Die and wafer devices (IEC 62435-5:2017)



31.220.01 Elektromehaničkisastavnidijelovi općenitoMeđunarodnanormizacijaIEC

IEC62951-1:2017Semiconductor devices – Flexible and stretchablesemiconductor devices – Part 1: Bending test method forconductivethinfilmsonflexiblesubstrates

31.240 Mehaničkekonstrukcijeza elektroničkuopremuEuropskanormizacijaCENELEC

EN61587-1:2017Mechanical structures for electronic equipment – Tests forIEC 60917 and IEC 60297 series – Part 1: Environmentalrequirements, test set-up and safety aspects for cabinets,racks, subracks and chassis under indoor condition use and transportation (IEC 61587-1:2016)

33.040.20 PrijenosnisustaviEuropskanormizacijaCENELEC

EN61970-301:2017Energy management system application program interface(EMS-API) – Part 301: Common information model (CIM)base (IEC 61970-301:2016)


33.040.99 Ostalaopremazakomunikacijske sustaveMeđunarodnanormizacijaIEC

IEC62766-4-2:2017Consumer terminal function for access to IPTV and openinternetmultimedia services – Part 4-2: Examples of IPTVprotocol sequences

33.050.01 Telekomunikacijskaterminalna opremaopćenitoEuropskanormizacijaETSI

ETSIEN303423V1.1.1:2017Environmental Engineering (EE); Electrical and electronichousehold and office equipment; Measurement ofnetworked standby power consumption of Interconnectingequipment;HarmonisedStandardcoveringthemeasurementmethod for EC Regulation 1275/2008 amended by EU Regulation 801/�013

33.060.20 PrijamnaiodašiljačkaopremaEuropskanormizacijaETSI

ETSIEN301178V2.2.2:2017Portable Very High Frequency (VHF) radiotelephone equipment for themaritimemobile service operating in theVHFbands(fornon-GMDSSapplicationsonly);HarmonisedStandardcoveringtheessentialrequirementsofarticle3.2ofDirective �014/53/EU

ETSI EN 301 908-3 V11.1.3 (�017IMT cellular networks; Harmonised Standard covering theessentialrequirementsofarticle3.2ofDirective2014/53/EU; Part3:CDMADirectSpread(UTRAFDD)BaseStations(BS)

ETSI EN 301 908-18 V11.1.� (�017IMT cellular networks; Harmonised Standard covering theessentialrequirementsofarticle3.2ofDirective2014/53/EU;Part 18: E-UTRA, UTRA and GSM/EDGE Multi-StandardRadio(MSR)BaseStation(BS)

ETSIEN302018V2.1.1:2017Transmitting equipment for the Frequency Modulated (FM)soundbroadcastingservice;HarmonisedStandardcoveringtheessentialrequirementsofarticle3.2ofDirective2014/53/EU

33.060.99 Ostalaopremaza radiokomunikacijeEuropskanormizacijaETSI

ETSIEN303146-4V1.1.2:2017ReconfigurableRadioSystems (RRS);MobileDevice (MD)informationmodelsandprotocols;Part4:RadioProgrammingInterface(RPI)

33.070.01 UslugepokretnemrežeopćenitoEuropskanormizacijaETSI

ETSI EN 301 908-3 V11.1.3 (�017IMT cellular networks; Harmonised Standard covering theessentialrequirementsofarticle3.2ofDirective2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations(BS)

ETSI EN 301 908-18 V11.1.� (�017IMT cellular networks; Harmonised Standard covering theessentialrequirementsofarticle3.2ofDirective2014/53/EU;Part 18: E-UTRA, UTRA and GSM/EDGE Multi-StandardRadio(MSR)BaseStation(BS)

33.070.99 OstalepokretneslužbeEuropskanormizacijaETSI



33.100.01 Elektromagnetskakompatibilnost općenitoEuropskanormizacijaCENELEC

EN55016-2-3:2017Specification for radiodisturbanceand immunitymeasuringapparatusandmethods–Part2-3:Methodsofmeasurementof disturbances and immunity – Radiated disturbancemeasurements(CISPR16-2-3:2016)

ETSI


ETSIEN301908-3V11.1.3:2017IMT cellular networks; Harmonised Standard covering theessentialrequirementsofarticle3.2ofDirective2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations(BS)

ETSIEN302017V2.1.1:2017Transmitting equipment for the Amplitude Modulated(AM) sound broadcasting service; Harmonised Standardcovering the essential requirements of article 3.2 of Directive �014/53/EU

33.100.10 ZračenjeEuropskanormizacijaCENELEC

EN55011:2016/A1:2017Industrial, scientific and medical equipment – Radio-frequencydisturbancecharacteristics–Limitsandmethodsofmeasurement(CISPR11:2015/Amd1:2016)

EN55014-1:2017Electromagneticcompatibility–Requirementsforhouseholdappliances, electric tools and similar apparatus – Part 1:Emission (CISPR14-1:2016+Cor1:2016)

ETSI

ETSIEN301908-3V11.1.3:2017IMT cellular networks; Harmonised Standard covering theessentialrequirementsofarticle3.2ofDirective2014/53/EU; Part3:CDMADirectSpread(UTRAFDD)BaseStations(BS)


IEC61000-3-11:2017Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations andflickerinpubliclow-voltagesupplysystems–Equipmentwithratedcurrent≤75Aandsubjecttoconditionalconnection


33.160.01 Audiosustavi, videosustavi i audiovizualnisustaviopćenitoEuropskanormizacijaCENELEC

EN62827-3:2017Wireless power transfer – Management – Part 3: Multiplesource control management (IEC 62827-3:2016)

33.160.99 Ostalaaudiooprema,videooprema iaudiovizualnaopremaMeđunarodnanormizacijaIEC

IEC62394:2017Servicediagnosticinterfaceforconsumerelectronicsproductsandnetworks–ImplementationforECHONET

33.170 TelevizijskiiradijskiprijenosEuropskanormizacijaCENELEC

EN62766-2-1:2017Consumer terminal function for access to IPTV and openinternet multimedia services – Part 2-1: Media formats (IEC 62766-2-1:2016)

EN62766-2-2:2017Consumer terminal function for access to IPTV and openinternet multimedia services – Part 2-2: HTTP adaptivestreaming (IEC 62766-2-2:2016)

EN62766-3:2017Consumer terminal function for access to IPTV and openinternet multimedia services – Part 3: Content metadata (IEC 62766-3:2016)

ETSI

ETSIEN300472V1.4.1:2017DigitalVideoBroadcasting(DVB);SpecificationforconveyingITU-RSystemBTeletextinDVBbitstreams

ETSIEN302017V2.1.1:2017Transmitting equipment for the Amplitude Modulated (AM)soundbroadcastingservice;HarmonisedStandardcoveringtheessentialrequirementsofarticle3.2ofDirective2014/53/EU

ETSIEN302018V2.1.1:2017Transmitting equipment for the Frequency Modulated (FM)soundbroadcastingservice;HarmonisedStandardcoveringtheessentialrequirementsofarticle3.2ofDirective2014/53/EU




33.180.10 SvjetlovodnavlaknaikabeliEuropskanormizacijaCENELEC

EN60793-1-1:2017Optical fibres – Part 1-1: Measurement methods and testprocedures–Generalandguidance(IEC 60793-1-1:2017)

33.200 Daljinskoupravljanje.Daljinsko mjerenjeMeđunarodnanormizacijaIEC

IEC61968-3:2017Applicationintegrationatelectricutilities–Systeminterfacesfor distributionmanagement –Part 3: Interface for networkoperations

IEC62056-8-6:2017Electricity metering data exchange – The DLMS/COSEMsuite–Part8-6:HighspeedPLCISO/IEC12139-1profileforneighbourhoodnetworks


35.020 Informacijskatehnologija(IT) općenitoEuropskanormizacijaCENELEC


EN60950-22:2017Information technology equipment – Safety – Part 22:Equipment to be installed outdoors (IEC 60950-22:2016)

35.030 SigurnostuinformacijskojtehnologijiMeđunarodnanormizacijaISO/IEC

ISO/IEC24759:2017Information technology – Security techniques – Testrequirementsforcryptographicmodules


35.040.40 Kodiranjeaudioinformacija, videoinformacija,multimedijskihi hipermedijskihinformacijaMeđunarodnanormizacijaISO/IEC

ISO/IEC14496-12:2015/Amd1:2017Information technology – Coding of audio-visual objects–Part12:ISObasemediafileformat–Amendment1:DRCExtensions

35.040.50 Tehnikeautomatskog prepoznavanjaipreuzimanja podatakaMeđunarodnanormizacijaIEC



35.040.99 Ostalenormekojeseodnosena kodiranjeinformacijaEuropskanormizacijaCENELEC


35.060 Jezicikojiseupotrebljavajuu informacijskojtehnologijiMeđunarodnanormizacijaISO/IEC

ISO/IEC19514:2017Informationtechnology–Objectmanagementgroupsystemsmodelinglanguage(OMGSysML)

35.100.20 SlojvezeizmeđupodatakaEuropskanormizacijaCENELEC

EN61987-11:2017Industrial-process measurement and control – Data structures and elements in -process equipment catalogues –Part 11: Listsofproperties(LOPs)ofmeasuringequipmentforelectronicdataexchange–Genericstructures(IEC 61987-11:2016)

35.100.30 MrežnislojMeđunarodnanormizacijaISO/IEC

ISO/IECTR29181-8:2017Informationtechnology–FutureNetwork–Problemstatementandrequirements–Part8:QualityofService

ISO/IECTR29181-9:2017Informationtechnology–FutureNetwork–Problemstatementandrequirements–Part9:Networkingofeverything

35.110 UmrežavanjeEuropskanormizacijaCENELEC



IEC62394:2017Servicediagnosticinterfaceforconsumerelectronicsproductsandnetworks–ImplementationforECHONET

35.160 MikroprocesorskisustaviEuropskanormizacijaCENELEC


35.180 Terminalnaidrugavanjskaoprema informacijsketehnologijeMeđunarodnanormizacijaISO

ISO9241-333:2017Ergonomics of human-system interaction – Part 333:Stereoscopic displays using glasses

35.240.15 Identifikacijskekarticei pripadajućenapraveMeđunarodnanormizacijaISO/IEC

ISO/IEC11695-3:2017Identification cards – Optical memory cards – Holographicrecording method – Part 3: Optical properties andcharacteristics

ISO/IEC18013-3:2017Informationtechnology–Personalidentification–ISO-compliant driving licence–Part 3:Access control, authentication andintegrity validation

35.240.30 PrimjeneIT-auobavješćivanju, dokumentacijiiizdavaštvuEuropskanormizacijaCENELEC



ISO18587:2017Translation services – Post-editing of machine translationoutput – Requirements

35.240.50 PrimjeneIT-auindustrijiEuropskanormizacijaCENELEC

EN61511-1:2017Functional safety – Safety instrumented systems for theprocess industry sector – Part 1: Framework, definitions,system,hardwareandapplicationprogrammingRequirements(IEC 61511-1:2016+Cor1:2016)

EN61511-2:2017Functional safety – Safety instrumented systems for theprocessindustrysector–Part2:GuidelinesfortheapplicationofIEC61511-1(IEC 61511-2:2016)

EN61511-3:2017Functional safety – Safety instrumented systems for theprocessindustrysector–Part3:Guidanceforthedeterminationoftherequiredsafetyintegritylevels(IEC 61511-3:2016)

EN61970-301:2017Energy management system application program interface(EMS-API) – Part 301: Common information model (CIM)base (IEC 61970-301:2016)

EN61987-11:2017Industrial-process measurement and control – Data structures and elements in -process equipment catalogues –Part 11: Listsofproperties(LOPs)ofmeasuringequipmentforelectronicdataexchange–Genericstructures(IEC 61987-11:2016)





35.240.60 PrimjeneIT-auprijevozuitrgoviniMeđunarodnanormizacijaISO

ISO24102-1:2013/Amd1:2017Intelligent transport systems – Communications access forlandmobiles (CALM) – ITS stationmanagement – Part 1:Localmanagement;Amendment1

ISO24102-3:2013/Amd1:2017Intelligent transport systems – Communications access forlandmobiles (CALM) – ITS stationmanagement – Part 3:Serviceaccesspoints;Amendment1

ISO24102-5:2013/Amd1:2017Intelligent transport systems – Communications access forlandmobiles (CALM) – ITS stationmanagement – Part 5:Fastserviceadvertisementprotocol(FSAP);Amendment1

ISO29281-1:2013/Amd1:2017Intelligent transport systems – Communication access forland mobiles (CALM) – Non-IP networking – Part 1: Fastnetworking&transportlayerprotocol(FNTP);Amendment1

35.240.63ITaplikacijezatrgovinuMeđunarodnanormizacijaIEC

IEC61000-3-11:2017Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations andflickerinpubliclow-voltagesupplysystems–Equipmentwithratedcurrent≤75Aandsubjecttoconditionalconnection


35.240.80 PrimjeneIT-autehnologijizaštite zdravljaMeđunarodnanormizacijaISO

ISO/IEEE11073-10417:2017Health informatics–Personalhealthdevicecommunication–Part10417:Devicespecialization–Glucosemeter

35.240.90ITaplikacijezaobrazovanjeMeđunarodnanormizacijaISO/IEC

ISO/IECTR19788-11:2017Information technology – Learning, education and training–Metadatafor learningresources–Part11:MigrationfromLOM to MLR

35.240.95InternetskeaplikacijeEuropskanormizacijaCENELEC

EN62766-2-1:2017Consumer terminal function for access to IPTV and openinternet multimedia services – Part 2-1: Media formats (IEC 62766-2-1:2016)

EN62766-2-2:2017Consumer terminal function for access to IPTV and openinternet multimedia services – Part 2-2: HTTP adaptivestreaming (IEC 62766-2-2:2016)

EN62766-3:2017Consumer terminal function for access to IPTV and openinternet multimedia services – Part 3: Content metadata (IEC 62766-3:2016)



35.240.99 PrimjeneIT-auostalimpodručjimaMeđunarodnanormizacijaIEC

IEC61968-3:2017Applicationintegrationatelectricutilities–Systeminterfacesfor distributionmanagement –Part 3: Interface for networkoperations


35.260 UredskistrojeviEuropskanormizacijaETSI


37.020 OptičkaopremaMeđunarodnanormizacijaISO

ISO20711:2017Optics and photonics – Environmental requirements – Test requirementsfortelescopicsystems

43.040.10 ElektričnaielektroničkaopremaEuropskanormizacijaCENELEC

EN62196-2:2017Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility and interchangeability requirements fora.c.pinandcontact-tubeaccessories(IEC 62196-2:2016)

43.060.10 Blokmotoraiunutarnjisastavni dijeloviMeđunarodnanormizacijaISO

ISO6624-1:2017Internalcombustionengines–Pistonrings–Part1:Keystoneringsmadeofcastiron

ISO6624-3:2017Internalcombustionengines–Pistonrings–Part3:Keystoneringsmadeofsteel


43.060.40 SustavigorivaMeđunarodnanormizacijaISO

ISO22241-3:2017Diesel engines – NOx reduction agent AUS 32 – Part 3:Handling, transportation, and storage

43.120 ElektričnacestovnavozilaEuropskanormizacijaCENELEC

EN62196-2:2017Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility and interchangeability requirements fora.c.pinandcontact-tubeaccessories(IEC 62196-2:2016)

43.140 MotocikliimopediMeđunarodnanormizacijaISO

ISO18243:2017Electrically propelled mopeds and motorcycles – Test specificationsandsafetyrequirementsforlithium-ionbatterysystems

45.020 ŽeljezničkatehnikaopćenitoEuropskanormizacijaCEN

EN15273-1:2013+A1:2016/AC:2017Railwayapplications–Gauges–Part1:General–Commonrulesforinfrastructureandrollingstock

45.060.01 Željezničkatračničkavozila općenitoEuropskanormizacijaCEN

EN15273-1:2013+A1:2016/AC:2017Railwayapplications–Gauges–Part1:General–Commonrulesforinfrastructureandrollingstock

45.060.20 VozilazategljenjeEuropskanormizacijaCEN

EN16586-1:2017Railwayapplications–DesignforPRMuse–Accessibilityofpersonswithreducedmobilitytorollingstock–Part1:Stepsforaccessandegress

EN16586-2:2017Railway applications – Design for PRM use –Accessibilityof persons with reduced mobility to rolling stock – Part 2:Boardingaids

47.020.70 OpremazanavigacijuiupravljanjeEuropskanormizacijaETSI



IEC62287-1:2017Maritime navigation and radiocommunication equipment andsystems–ClassBshipborneequimentoftheautomaticidentification system (AIS) – Part 1: Carrier-sense timedivision multiple access (CSTDMA) techniques

49.020 Zrakoploviisvemirskavozila općenitoMeđunarodnanormizacijaISO

ISO16192:2017Space systems – Experience gained in space projects(lessons learned) – Principles and guidelines

49.030.99 OstalevrstespojnihelemenataEuropskanormizacijaCEN

EN2285:2017Aerospaceseries–Bushes,plain,aluminiumalloy,withself-lubricating liner – Dimensions and loads

EN2286:2017Aerospace series – Bushes, flanged aluminium alloy, withself-lubricatingliner–Dimensionsandloads

49.035 Sastavnidijelovizazrakoplovne konstrukcijeEuropskanormizacijaCEN

EN6075:2017Aerospace series – Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107°C)–Inchseries

EN6076:2017Aerospaceseries–StaticsealelementsO-Ringforstraightthread tube fitting boss, ethylene-propylene, moulded,phosphateesterresistant(-55°Cto107°C)–Inchseries

49.080 Hidrauličniipneumatskisustavii sastavnidijelovizazrakoploveEuropskanormizacijaCEN

EN4810:2017Aerospaceseries–Flangecouplings–GasketsealwithnickelalloyCsealonheatresistingsteelplatewith3fasteningholes– Inch series


ISO9538:2017Aerospaceseries–Hydraulictubingjointsandfittings–Planarflexuretest

ISO18487-1:2017Aerospace series – Titanium tube for 35 MPa operatingpressure–Part1:Inchseries

49.140 SvemirskisustaviioperacijeMeđunarodnanormizacijaISO

ISO16192:2017Space systems – Experience gained in space projects(lessons learned) – Principles and guidelines


53.100 StrojevizazemljaneradoveMeđunarodnanormizacijaISO

ISO5006:2017Earth-moving machinery – Operator’s field of view – Testmethodandperformancecriteria

65.060.40 OpremazanjegubiljakaMeđunarodnanormizacijaISO

ISO5682-1:2017Equipmentforcropprotection– Spraying equipment –Part1:Testmethodsforsprayernozzles

ISO5682-2:2017Equipmentforcropprotection–Sprayingequipment–Part2:Test methods to assess the horizontal transverse distribution forhydraulicsprayers

ISO5682-3:2017Equipment for crop protection – Spraying equipment –Part3:Testmethodtoassesstheperformanceofvolume/area adjustment systems

65.060.80 OpremazašumarstvoMeđunarodnanormizacijaISO

ISO11681-2:2011/Amd1:2017Machinery for forestry – Portable chain-saw safetyrequirementsandtesting–Part2:Chain-sawsfortreeservice– Amendment 1

67.100.01 Mlijekoimliječniproizvodi općenitoMeđunarodnanormizacijaISO

ISO22964:2017Microbiology of the food chain –Horizontalmethod for thedetectionofCronobacterspp.

67.160.20 BezalkoholnapićaEuropskanormizacijaCEN

EN16857:2017Foodstuffs–Determinationofbenzene in soft drinks,otherbeveragesandvegetable-based infant foodsbyheadspacegaschromatographymassspectrometry(HS-GC-MS)

67.200.10 ŽivotinjskeibiljnemastiiuljaMeđunarodnanormizacijaISO

ISO3656:2011/Amd1:2017Animal and vegetable fats and oils – Determination ofultraviolet absorbance expressed as specificUV extinction;Amendment 1

67.230 ZapakiranaizgotovljenahranaEuropskanormizacijaCEN

EN16857:2017Foodstuffs–Determinationofbenzene in soft drinks,otherbeveragesandvegetable-based infant foodsbyheadspacegaschromatographymassspectrometry(HS-GC-MS)

71.040.20 Laboratorijskoposuđei odgovarajućaaparaturaEuropskanormizacijaCENELEC

EN61010-2-011:2017Safetyrequirementsforelectricalequipmentformeasurement,control,andlaboratoryuse–Part2-011:Particularrequirementsforrefrigeratingequipment(IEC 61010-2-011:2016)

EN61010-2-020:2017Safetyrequirementsforelectricalequipmentformeasurement,control,andlaboratoryuse–Part2-020:Particularrequirementsforlaboratorycentrifuges(IEC 61010-�-0�0:2016)

71.040.40 KemijskaanalizaMeđunarodnanormizacijaISO

ISO12963:2017Gasanalysis–Comparisonmethodsforthedeterminationofthecompositionofgasmixturesbasedonone-andtwo-pointcalibration

71.040.50 FizikalnokemijskemetodeanalizeMeđunarodnanormizacijaISO

ISO19214:2017Microbeam analysis – Analytical electron microscopy –Method of determination for apparent growth direction ofwirelikecrystalsbytransmissionelectronmicroscopy

73.040 UgljenMeđunarodnanormizacijaISO

ISO14180:2017Solid mineral fuels – Guidance on the sampling of coalseams

73.060.10 ŽeljezoverudeMeđunarodnanormizacijaISO

ISO/TR4688-1:2017Ironores–Determinationofaluminium–Part1:Flameatomicabsorption spectrometric method

75.160.40 BiogorivaMeđunarodnanormizacijaISO

ISO14780:2017Solidbiofuels–Samplepreparation

ISO18125:2017Solidbiofuels–Determinationofcalorificvalue

ISO19743:2017Solidbiofuels–Determinationofcontentofheavyextraneousmaterials larger than 3,15 mm

77.150.20 ProizvodiodmagnezijaMeđunarodnanormizacijaISO

ISO16220:2017Magnesium and magnesium alloys – Magnesium alloy ingots and castings


81.060.30 TehničkakeramikaMeđunarodnanormizacijaISO

ISO19628:2017Fine ceramics (advanced ceramics, advanced technical ceramics)–Thermophysicalpropertiesofceramiccomposites–Determinationofspecificheatcapacity

ISO19810:2017Fine ceramics (advanced ceramics, advanced technical ceramics) – Test method for self-cleaning performance ofsemiconducting photocatalytic materials under indoor lighting environment–Measurementofwatercontactangle

83.080.01 PlastikaopćenitoMeđunarodnanormizacijaISO

ISO4589-1:2017Plastics – Determination of burning behaviour by oxygenindex–Part1:Generalrequirements

ISO4589-2:2017Plastics – Determination of burning behaviour by oxygenindex–Part2:Ambient-temperaturetest

ISO4589-3:2017Plastics – Determination of burning behaviour by oxygenindex–Part3:Elevated-temperaturetest

ISO9370:2017Plastics– Instrumentaldeterminationofradiantexposure inweatheringtests–Generalguidanceandbasictestmethod

83.160.30 Gumezapoljoprivredneiostale strojeveMeđunarodnanormizacijaISO

ISO4251-1:2017Tyres (ply rating marked series) and rims for agriculturaltractors and machines – Part 1: Tyre designation anddimensions, and approved rim contours

ISO4251-2:2017Tyres (ply rating marked series) and rims for agriculturaltractorsandmachines–Part2:Tyreloadratings

91.010.30 TehničkiaspektiEuropskanormizacijaCEN

EN1993-1-5:2006/A1:2017Eurocode3 –Designof steel structures –Part 1-5:Platedstructural elements

EN1993-1-6:2007/A1:2017Eurocode3–Designofsteelstructures–Part1-6:StrengthandStabilityofShellStructures

91.040.01 GrađevineopćenitoMeđunarodnanormizacijaISO

ISO15686-7:2017Buildings and constructed assets – Service life planning–Part7:Performanceevaluationforfeedbackofservicelifedatafrompractice

91.040.10 JavnegrađevineEuropskanormizacijaCEN

EN13200-8:2017Spectatorfacilities–Part8:SafetyManagement

91.060.50 VrataiprozoriMeđunarodnanormizacijaISO

ISO19467:2017Thermalperformanceofwindowsanddoors–Determinationofsolarheatgaincoefficientusingsolarsimulator

91.080.13ČeličnekonstrukcijeEuropskanormizacijaCEN

EN1993-1-5:2006/A1:2017Eurocode3 –Designof steel structures –Part 1-5:Platedstructural elements

EN1993-1-6:2007/A1:2017Eurocode3–Designofsteelstructures–Part1-6:StrengthandStabilityofShellStructures

91.080.20 DrvenekonstrukcijeMeđunarodnanormizacijaISO

ISO/TR21136:2017Timberstructures–Vibrationperformancecriteriafortimberfloors

91.100.30 BetonibetonskiproizvodiEuropskanormizacijaCEN

EN451-1:2017Method of testing fly ash – Part 1: Determination of freecalciumoxidecontent

EN451-2:2017Methodoftestingflyash–Part2:Determinationoffinenessbywetsieving

91.100.50 Veziva.MaterijalizabrtvljenjeEuropskanormizacijaCEN

EN13967:2012+A1:2017Flexiblesheetsforwaterproofing–Plasticandrubberdampproofsheets includingplasticand rubberbasement tankingsheet–Definitionsandcharacteristics

EN14693:2017Flexiblesheetsforwaterproofing–Waterproofingofconcretebridge decks and other concrete surfaces trafficable byvehicles –Determination of the behaviour of waterproofingsheetsduringapplicationofmasticasphalt

91.120.10 ToplinskaizolacijaEuropskanormizacijaCEN

CEN/TR12831-2:2017Energyperformanceofbuildings–Methodforcalculationofthedesignheatload–Part2:ExplanationandjustificationofEN 1�831-1, Module M3-3

CEN/TR12831-4:2017Energyperformanceofbuildings–Methodforcalculationofthedesignheatload–Part4:ExplanationandjustificationofEN 1�831-3, Module M8-�, M8-3

EN15193-1:2017Energyperformanceofbuildings–Energyrequirements forlighting–Part1:Specifications,ModuleM9



CEN/TR15316-6-2:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 6-2: Explanation and justification of EN 15316-2,Module M3-5, M4-5

CEN/TR15316-6-3:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies –Part6-3:Explanationandjustificationof15316-3,ModuleM3-6, M4-6, M8-6

CEN/TR15316-6-4:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 6-4: Explanation and justification of EN 15316-4-1,Module M3-8-1, M8-8-1

CEN/TR15316-6-5:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 6-5: Explanation and justification of EN 15316-4-2,Module M3-8



CEN/TR15316-6-8:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 6-8: Explanation and justification of EN 15316-4-5 (District heating and cooling), Module M3-8-5, M4-8-5, M8-8-5, M11-8-5



CEN/TR15378-2:2017Energy performance of buildings – Heating systems andDHW in buildings – Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11

CEN/TR15378-4:2017Energy performance of buildings – Heating systems andDHW in buildings – Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10

CEN/TR15459-2:2017Energy performance of buildings – Economic evaluationprocedureforenergysystemsinbuildings–Part2:ExplanationandjustificationofEN15459-1,ModuleM1-14

EN16783:2017Thermal insulation products – Product category rules (PCR) for factorymade and in-situ formed products for preparingenvironmental product declarations

EN16947-1:2017Energy Performance of Buildings – Building ManagementSystem–Part1:ModuleM10-12


ISO19467:2017Thermalperformanceofwindowsanddoors–Determinationofsolarheatgaincoefficientusingsolarsimulator

91.140.10 SustavicentralnogagrijanjaEuropskanormizacijaCEN

EN12098-1:2017Energy Performance of Buildings – Controls for heatingsystems –Part 1: Control equipment for hotwater heatingsystems – Modules M3-5, 6, 7, 8

CEN/TR12831-2:2017Energyperformanceofbuildings–Methodforcalculationofthedesignheatload–Part2:ExplanationandjustificationofEN 1�831-1, Module M3-3


EN15316-1:2017Energyperformanceofbuildings–Methodforcalculationofsystemenergyrequirementsandsystemefficiencies–Part1:GeneralandEnergyperformanceexpression,ModuleM3-1,M3-4, M3-9, M8-1, M8-4

EN15316-2:2017Energyperformanceofbuildings–Methodforcalculationofsystemenergyrequirementsandsystemefficiencies–Part2:Space emission systems (heating and cooling), Module M3-5, M4-5

EN15316-3:2017Energyperformanceofbuildings–Methodforcalculationofsystemenergyrequirementsandsystemefficiencies–Part3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6

EN15316-4-2:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 4-2: Space heating generation systems, heat pumpsystems, Module M3-8-�, M8-8-�

EN15316-4-3:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 4-3: Heat generation systems, thermal solar andphotovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3

EN15316-4-4:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 4-4: Heat generation systems, building-integratedcogeneration systems, Module M8-3-4, M8-8-4, M8-11-4

EN15316-4-8:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies –Part4-8:Spaceheatinggenerationsystems,airheatingandoverhead radiant heating systems, including stoves (local), Module M3-8-8






CEN/TR15316-6-5:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 6-5: Explanation and justification of EN 15316-4-2,Module M3-8






EN15378-1:2017Energyperformanceofbuildings–HeatingsystemsandDHWinbuildings–Part1: Inspectionofboilers,heatingsystemsand DHW, Module M3-11, M8-11

CEN/TR15378-2:2017Energy performance of buildings – Heating systems andDHW in buildings – Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11

EN15378-3:2017Energyperformanceofbuildings–HeatingandDHWsystemsinbuildings–Part3:Measuredenergyperformance,ModuleM3-10, M8-10

CEN/TR15378-4:2017Energy performance of buildings – Heating systems andDHW in buildings – Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10

CEN/TR15459-2:2017Energy performance of buildings – Economic evaluationprocedureforenergysystemsinbuildings–Part2:ExplanationandjustificationofEN15459-1,ModuleM1-14

91.140.30 Sustaviprozračivanjai klimatizacijeEuropskanormizacijaCEN

EN1366-10:2011+A1:2017Fireresistancetestsforserviceinstallations–Part10:Smokecontrol dampers

EN15316-3:2017Energyperformanceofbuildings–Methodforcalculationofsystemenergyrequirementsandsystemefficiencies–Part3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6



91.140.50 Sustaviopskrbeelektričnom energijomEuropskanormizacijaCENELEC

EN62052-11:2003/A1:2017Electricitymeteringequipment(AC)–Generalrequirements,tests and test conditions – Part 11: Metering equipment (IEC62052-11:2003/Amd1:2016)

EN62053-23:2003/A1:2017Electricity metering equipment (a.c.) – Particular requirements –Part23:Staticmetersforreactiveenergy(classes2and3)(IEC62053-23:2003/Amd1:2016)

EN62053-24:2015/A1:2017Electricity metering equipment (a.c.) – Particular requirements – Part 24: Static meters for reactive energyat fundamental frequency (classes 0,5 S, 1 S and 1) (IEC62053-24:2014/Amd1:2016)


IEC60364-7-708:2017Low-voltageelectricalinstallations–Part7-708:Requirementsforspecialinstallationsorlocations–Caravanparks,campingparks and similar locations

IEC60364-7-712:2017Lowvoltageelectricalinstallations–Part7-712:Requirementsforspecialinstallationsorlocations–Solarphotovoltaic(PV)powersupplysystems


91.140.65 OpremazagrijanjevodeEuropskanormizacijaCEN


EN15316-3:2017Energy performance of buildings – Method for calculationof system energy requirements and system efficiencies – Part 3: Space distribution systems (DHW, heating andcooling), Module M3-6, M4-6, M8-6





91.140.99 Ostalenormekojeseodnosena zgradeEuropskanormizacijaCEN


91.160.01 RasvjetaopćenitoEuropskanormizacijaCEN


93.020 Zemljaniradovi.Iskopavanja. Temeljenje.PodzemniradoviMeđunarodnanormizacijaISO

ISO22476-11:2017Geotechnicalinvestigationandtesting–Fieldtesting–Part11: Flat dilatometer test

93.030 VanjskikanalizacijskisustaviEuropskanormizacijaCEN

EN752:2017Drainandsewersystemsoutsidebuildings–SewersystemmanagementŽ

93.100 GradnjaželjezničkihprugaEuropskanormizacijaCEN

EN13803:2017Railway applications – Track – Track alignment designparameters–Trackgauges1435mmandwider

97.030 Kućanskielektričniuređaji općenitoEuropskanormizacijaETSI


97.040.20 Štednjaci,radnistolovi,pećnicei sličniuređajiMeđunarodnanormizacijaIEC

IEC60335-2-36:2017Household and similar electrical appliances – Safety –Part2-36:Particular requirements forcommercialelectriccooking ranges, ovens, hobs and hob elements

IEC60335-2-37:2017Household and similar electrical appliances – Safety –Part2-37:Particular requirements forcommercialelectricdoughnutfryersanddeepfatfryers

IEC60335-2-39:2012/Amd1:2017Household and similar electrical appliances – Safety –Part2-39:Particular requirements forcommercialelectricmulti-purposecookingpans;Amendment1

IEC60335-2-39:2012+Amd1:2017Household and similar electrical appliances – Safety –Part2-39:Particular requirements forcommercialelectricmulti-purpose cooking pans

IEC60335-2-42:2002/Amd2:2017Amendment � – Household and similar electrical appliances –Safety–Part2-42:Particularrequirementsforcommercialelectricforcedconvectionovens,steamcookersandsteam-convection ovens

IEC60335-2-42:2002+Amd1:2008+Amd2:2017Household and similar electrical appliances – Safety –Part2-42:Particular requirements forcommercialelectricforced convection ovens, steam cookers and steam-convection ovens

IEC60335-2-47:2002/Amd2:2017Amendment � – Household and similar electrical appliances –Safety–Part2-47:Particularrequirementsforcommercialelectric boiling pans

IEC60335-2-47:2002+Amd1:2008+Amd2:2017CSVHousehold and similar electrical appliances – Safety –Part2-47:Particular requirements forcommercialelectricboiling pans

IEC60335-2-48:2002/Amd2:2017Amendment � – Household and similar electrical appliances –Safety–Part2-48:Particularrequirementsforcommercialelectric grillers and toasters

IEC60335-2-48:2002+Amd1:2008+Amd2:2017Household and similar electrical appliances – Safety –Part2-48:Particular requirements forcommercialelectricgrillers and toasters

97.040.30 KućanskirashladniuređajiMeđunarodnanormizacijaIEC

IEC60335-2-24:2010/AMD2:2017Household and similar electrical appliances – Safety –Part2-24:Particularrequirementsforrefrigeratingappliances,ice-creamappliancesandicemakers;Amendment2

IEC60335-2-24:2010+AMD1:2012+AMD2:2017Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigeratingappliances, ice-cream appliances and ice makers

97.040.40 StrojevizapranjeposuđaMeđunarodnanormizacijaIEC

IEC60704-2-3:2017Householdandsimilarelectricalappliances–Testcode forthe determination of airborne acoustical noise – Part 2-3:Particularrequirementsfordishwashers

97.120 Automatskoupravljanjeza kućanskuupotrebuEuropskanormizacijaCEN

EN16946-1:2017EnergyPerformanceofBuildings–InspectionofAutomation,Controls and Technical Building Management – Part 1:Module M10-11

EN16947-1:2017Energy Performance of Buildings – Building ManagementSystem–Part1:ModuleM10-12

EN63044-1:2017HomeandBuildingElectronicSystems(HBES)andBuildingAutomationandControlSystems(BACS)–Part1:Generalrequirements


97.140 NamještajEuropskanormizacijaCEN

EN16890:2017Children’sfurniture–Mattressesforcotsandcribs–Safetyrequirements and test methods

EN16955:2017Hardware for furniture – Tapered pressure tubes for self-supportinggassprings for theheightadjustmentof seating–Testmethodsandrequirementsforstrengthanddurability

97.190 OpremazadjecuEuropskanormizacijaCEN

EN16890:2017Children’sfurniture–Mattressesforcotsandcribs–Safetyrequirements and test methods

97.195 UmjetničkiiobrtničkipredmetiEuropskanormizacijaCEN

EN16853:2017Conservation of cultural heritage – Conservation process– Decision making, planning and implementation

97.200.10 Opremazakazalište,scenuistudioEuropskanormizacijaCEN


97.200.30 OpremazakampiranjeikampoveMeđunarodnanormizacijaIEC

IEC60364-7-708:2017Low-voltageelectricalinstallations–Part7-708:Requirementsforspecialinstallationsorlocations–Caravanparks,campingparks and similar locations

97.200.50 IgračkeMeđunarodnanormizacijaIEC

IEC62115:2017Electrictoys–Safety

97.220.10 SportskiobjektiEuropskanormizacijaCEN


Documents

Oglasnik za normativne dokumente · HRN ISO 15501-2:2017 en pr Cestovna vozila – Sustavi za stlačeni prirodni plin (SPP) kao gorivo – 2. dio: Metode ispitivanja (ISO 15501-2:2016)