parklex_panouri_din_lemn_pentru_placari_interioare

7/28/2019 parklex_panouri_din_lemn_pentru_placari_interioare

1/44

InternalThe durable, contemporary timbersolution.


2/44

over photo:

uipuzcoan Football Federation

roject: Izaskun Larzbal

hotography: Susana Archaga and Luis M. Ambrs

arklex 2000, Eucalyptus


3/44

The natural wood used to manufacture Parklex providesa look of quality and comfort for building interiors fromthe very first moment.

With Parklex, ceilings, walls and floors, in addition toany other surface, such as counter tops, bathroomsand even showers take on a new leading role.

If youre looking for quality and comfort, Parklex has awide range of natural wood finishes that achieve bothpurposes. In addition, its variety of finishes allowsdecorators and architects to be creative with combinationson any type of surface, allowing them to decorate thefloors, walls or ceiling in the same wood, providing thedegree of quality and comfort that only natural, high-quality materials can convey.

Indoor woodcoverings.


4/44

Floor,walls and

ceiling.

The same colors andfinishes throughout theinterior.

Parklex paneling may be installed on any surface:floors, walls and ceilings, combining aesthetic elementsor keeping the same colors and finishes throughoutthe interior, converting rooms into authentic enclosures,completely lined with natural wood panels.

Floors:

2000

3000

Walls and ceiling:

Dry areas:

500

Damp areas:

700

Recommended products:


5/44

Quality at

your feet.

It demonstrates itsquality where it suffersthe most wear.

The quality of Parklex comes from the materials andprocesses used to manufacture them. This quality isdemonstrated precisely where the product suffers themost wear: floors, transit spaces and areas of intensiveuse, where any material suffers a high level of wear.Parklex, however, performs at top levels in these areas,with its properties remaining unchanged. Simplemaintenance is all that is needed to prolong the life ofthese coverings, which makes them immediatelyeconomical.

Floors:

2000

3000



6/44

Silence:another form

of comfort.


7/44

Coverings for locationswith high acoustic ab-sorption requirements.

Noise and reverberation prevention is also a form ofcomfort. Parklex 500 is designed to be installed as anindoor wall and ceiling covering in locations with highacoustic absorption requirements: conference halls,presentation rooms, auditoriums, offices, etc., as wellas furniture coverings.These panels insulate rooms from outside noise or thatof nearby areas, providing an even greater feeling ofcomfort.

Walls and ceiling:

500



8/44

Excellent firebehavior. Parklexmeans peace of

mind.


9/44

Natural wood with thebest results for reactionto fire.

In addition to being manufactured from natural wood,the entire Parklex line is tested according to the newEuropean standard EN 13.501 regarding reaction tofire, obtaining the best results possible for organicmaterials.With Parklex, you are sure to make the right decision.

Floors:

2000

Walls and ceiling:

Dry areas:

500

Damp areas:

700



10/44

Bathrooms,gymnasiums, spasor pools: dont

relinquish comfort.

Cozy, moisture resistantspaces.

Moisture is a factor that generally determines the materialsused in bathrooms. Thanks to the production and treatmentprocesses Parklex uses on natural wood, it is now possibleto use Parklex coverings in any area of the bathroom,even in the shower, transforming them into areas that are

just as inviting as the rest of the interior.The Parklex line stands out for its moisture resistance,which also allows its problem-free use in gymnasiums,spas or pools, making these areas (and any other spacewhere appearance, hygiene, resistance and cleanlinessare important) exclusive places that are both pleasant andtotally unique.

Floors (bathrooms andgymnasiums):

2000


Walls and ceiling:

Damp areas:

700


11/44

ParklexProjects


12/44

Bilbao, May 14, 2007

Dear Sirs:

After ten years of intensive use, withs-

tanding the regular heavy machinery

traffic and the exposition of sculptures

weighing many tons, we would like to

express our satisfaction with the wood

floors in the Guggenheim Museum ga-

lleries (Manufacturer: Composites Gu-

rea, model Parklex 2000, lightened ash),

with regards to both the ease of cleaning

and their durability and strength.

Rogelio Diez

Maintenance and Installations Supervisor

GuggenheimBilbaoBilbao, Spain.

Architect: Frank O. Gehry

Project manager: Csar Caicoya

Parklex 2000, Museum Ash

Bilbao, 14 de mayo de 2007

Estimados Seores:

Tras diez aos de funcionamiento intensivo de los suelos

de madera en las Galeras del Museo Guggenheim

(Fabricante Composites Gurea, modelo Parklex 2000,

fresno clarificado), soportando el paso habitual de

maquinaria pesada y la exposicin de esculturas de gran

tonelaje, comunicamos nuestra satisfaccin con los

mismos, tanto en su facilidad de limpieza como en su

durabilidad y resistencia.


13/44

NavarranGovernmentPress RoomPamplona, Spain.

Architects: Javier Barcos Berruezo andManolo Enrquez Jimnez

Parklex 500, Walnut

Parklex 2000, Walnut


14/44

Marqus de RiscalHotelThe Luxury Collection.

Alava, Spain.

Architect: Frank O. Gehry

Project manager: Csar Caicoya

Parklex 500, Maple

Parklex 2000, Maple


15/44


16/44

Cepa 21 WineriesValladolid, Spain.

Architects: BSA Arquitectos

Interior design: TGA+Asociados andJavier Machimbarrena

Parklex 500, Maple

Burlada CulturalCenterNavarre, Spain.

Architect: Miguel Ayate Bariain

Parklex 500


17/44

Puerta de AmericaHotelMadrid, Spain.

Architect: Jean Nouvel

Parklex 2000


18/44

Zubieta XXI SportsComplexGuipuzcoa, Spain.

Project: Izaskun Larzbal, FernandoGrate and Agustn Oteiza

Photography: Susana Archaga and LuisM. Ambrs

Parklex 2000, Natural Beech


19/44

De la Pea StationBilbao, Spain.

Architect: GPD Studio

Parklex 500


20/44

La Perla HotelPamplona, Spain.

Architect: Javier Martnez Oroquieta

Parklex 500, Walnut


Thermae Bath SpaThe Minerva Bath.

Bath, United Kingdom.

Architect: Nicholas Grimshaw & Partners

Photography: Matt Cardy

Parklex 700, Maple


21/44

GuipuzcoanFootballFederationGuipuzcoa, Spain.

Project: Izaskun Larzbal


Parklex 2000, Eucalyptus


22/44

Attic in SanSebastianGuipuzcoa, Spain.

Interior design: Vernica Conejos

Parklex 2000, Museum Ash

COEC, CatalonianOdontologist andStomatologistAssociationBarcelona, Spain.

Architect: Pere Fosch i Alvarez

Parklex 3000, Maple


23/44

Beroa BarGuipuzcoa, Spain.

Design: Formak Studio

Parklex 2000 (floor)

Parklex 3000, Zebrano (bar)

Home inPamplonaNavarre, Spain.

Interior design: Hctor Elizaga


Parklex 2000, Maple


24/44

Air France, VIPLoungeNarita International Airport.

Tokyo, Japan.

Architect: No Duchaufour-Lawrance

Parklex 500, Reconstituted Oak

Parklex 2000, Reconstituted Oak


25/44

Electronics ArtsLondon, United Kingdom.

Architect: Foster + Partners

Photography: Nigel Young

Parklex 2000, Natural Beech

Amrey HotelBarcelona, Spain.

Architect: Ramn Domenech

Parklex 2000, Maple


26/44

Home in SanSebastianGuipuzcoa, Spain.

Interior design: Javier Machimbarrena



Home in PuertoPollenaMajorca, Spain.

Architect: Joan Riusech


Parklex 2000, Maple


27/44

Technicalcharacteristics


28/44

Rigorous testing guarantees Parklexs excellent performance.

Guarantees / Quality Certificates

About Parklex

Perfect adaptation to the project design is an essential requi-

rement. Thats why the technology used to manufacture Parklex

allows us to apply different finishes, all in natural wood, to

integrate them completely into the environment that is required

for each project.

Finishes

The variety of finishes and colors in natural and dyed panels

sets Parklex apart as a result of its versatility, making it the

ideal covering from any type of project.

Range

Providing service on an international level has meant establi-shing an extensive network of Parklex distributors on all five

continents. This allows us to work more closely with our clients

and offer them better service in a way that is more accessible

to them. It also lets us understand their needs perfectly and

first hand.

International

The best architects in the world use Parklex in their mostemblematic creations. Why is this so? Because they feel

comfortable and at ease, and because the results do not

disappoint them. Without a doubt, it is because at Parklex we

have been working for over 15 years on a daily basis with

architects from all over the world, including, for example,

Santiago Calatrava, Frank Gehry, Norman Foster, Jean Nouvel

and Nicholas Grimshaw, adapting our range to their require-

ments. This has made Parklex the natural wood covering of

choice in many of the best quality and best-known projects

in the world.

This can only be achieved by a brand with an absolute

guarantee, capable of offering the perfect product, totally

adapted to their needs, with problem-free application.

Architects

The surface is always made from 100% natural wood, treated

according to its application: to resist special weather conditions

or to perfectly resist the intensive use it might receive in

interiors.

Natural wood

Each type of Parklex is subjected to a different production

process, depending on its final application: interiors, exteriors,

damp areas, etc.

The base is always high-density laminated wood with a paper

fiber core that has been treated with thermosetting resins and

compressed at high pressure and temperature.

Production process


29/44

Parklex The ideal solution

Characteristics

Quality and performance are only the most visible resultsof Parklex. As if this werent enough, the advantages

offered by Parklex are evident from the momentit is installed, up to its long-term maintenance.

Strength.

Material for intensive use indoor areas is made with the highest

quality natural wood panels that have been impregnated using

the Gureprex system, which provides a series of benefits with

regards to abrasion, moisture resistance, hardness, scratch

resistance and dimensional stability that are far superior to

any of the varnish-treated products currently found on the

market.

Quality.

Parklex means quality. All our products have earned the CE

mark and carry an absolute guarantee. Exterior panels are

manufactured according to the European standard EN 438,

which applies to HPL (high pressure laminates). This is why

Parklex is the covering preferred by the worlds most prestigious

architects.

Moisture resistance.

The technology used by Parklex to manufacture the exterior

coverings completely guarantees them against extreme wea-

ther conditions: rain, sun, humidity and heat. This same

technology allows us to provide a material for interiors with

identical resistance properties. Parklex therefore provides the

ideal product for damp areas.

Fire behavior.

The entire Parklex line is classified according to the new

European standard EN 13.501-1:2002 regarding reaction to

fire, obtaining the best results possible for organic materials.

Ease of installation.

The floating flooring system is simple and low-cost. The rest

of the products may be easily installed, following clear, pro-

fessional instructions.

Maintenance.

Parklex does not require any sort of scraping or varnishing

as part of its maintenance. It need only be lightly cleansed

with a mop, using liquid ph-neutral soap and water.

Service.

Parklex has a technical support department to answer any

questions regarding product assembly and to give advice on

the most appropriate type of covering to meet every need.

Acoustic absorption.

Parklex 500 and Parklex 700 may be perforated, making them

the ideal materials for acoustic absorption. They have been

manufactured specifically for interiors where the acoustic

factor is important.


30/44

External

High-density stratified timberpanels for external use.

700

Natural timber ceiling and wall

finishes.

500

Natural timber finish for full

access raised floors.

3000

Stratified timber panels for in-

ternal use, with high resistance

to humidity.

Natural timber floor for ex-

treme wear environments.

2000

Internal

Floors

Walls andceilings

Damp areas

Dry areas

Floating

parquet

Raisedflooring

Faades Facade

Parklex product guide


31/44


32/44

Panel construction

Bakelite

Moisture resistant overlay

Natural timber veneer

HPL core


Balancing film

Parklex is manufactured from fine timber veneers, therefore the colour and grain of different batches will exhibit natural variations. Due to the limitations ofprinted media, the finishes printed in this catalogue are merely an approximation of their real color. For this reason, before placing any order, Parklexrecommends consulting our sales personnel to request actual samples.

Woodskin. A finish that allows you to

feel the grain and subtlety of natural

timber.

Smooth(3) . Traditional Parklex finish.

Reveals the simple, natural beauty of the

wood it is manufactured with.

Surface characteristics

Smooth Rubber

Special finishes

Chequerplate Rubber PerforatedChequerplate (3)

(1)Panels manufactured from joined timber

veneers. There may be as many as 12 veneer

pieces in each full panel (16 in the case of

stained finishes).

Stratified timber panels for internal use,with high resistance to humidity.

Parklex 700 is a high-density stratified natural timber panel,

made from kraft paper that has been treated with thermosetresins compressed under high pressures and temperatures,

finished with natural timber veneers.

(3)Only available in the following finishes:

Ambar, Antra, Copper, Gold, Onix, Quartz,

Rubi and Silver.

Assembly systems *

Exposed fastening. The Parklex panels

are fastened with stainless steel screws

or rivets to the treated wood or metal

substructure.

Hidden fastening, with special hanging

profiles. The Parklex panels are attached

to the aluminum substructure, using guide

profiles and hanging pins.

Hidden fastening, using adhesive. The

Parklex panels are fastened using adhesiveto the treated wood or metal substructure.

Hidden fastening, with caps. The Parklex

panels are attached with screws hiddenby caps with a diameter of 10,75mm and

a section of 2mm, using the same material

and finish as the panel.

For more information on installation, consult the Internal Parklex Assembly Catalogue

or our web page (www.parklex.com).

*

(2)Available only in a Smooth surface finish.

700

Finish range

Ayous NaturalAmbar (2) Antra (2)

Natural Zebrano (1)

Quercus (1) Natural Oak (1) Reconstituted Oak (1) Sapelli (1)

Wengue (1)

Museum Ash (1)

Onix (2) Quartz (2) Rubi (2) Silver (2)

OkumeWalnut (1)Maple (1)Green Beech (1)Natural Beech (1)Gold (2) Grey Beech (1)

Cherry (1)Bryna (1) Eucalyptus (1)Copper (2)Black


33/44

Technical characteristics

Thickness 6 mm | Surface finish Lisse

3. General

Dimensional stability EN 438-2 Part. 17 Cumulative dimensionalchange (t 6mm)

% max 0,300,60

Tensile strength EN ISO 527-2 Longitudinal directionTransversal direction

Mpa 60

Density EN ISO 1.183 Density gr/cc 1,35

Resistance to impact ylarge diameter ball

EN 438-2 Part. 21Maximun height for which no visible

surface craking or imprint greater than(t 6mm)

mm 1.800

Flexural modulus EN ISO 178Longitudinal directionTransversal direction Mpa

9.0009.000

Resistance to inmersion inboling water

EN 438-2 Part. 12 Moisture absorbedAppearance

%Degree

Flexural strength EN ISO 178Longitudinal directionTransversal direction Mpa

8080

224

ResultMesure UnitProperty or AttributeStandardTests

4. CE Safety requirements

Water vapour permeability EN 438-7 Part. 4.4Wet cup metedDry cup method

110250

Rsistance to fixings EN 438-7 Part. 4.5 Force Nw/mm 400

Content of pentachlorophenol EN 438-7 Part. 10 Content pentachlorophenol ppm Non detectable

Release of formaldehyde EN 438-7 Part. 10 Release of formaldehyde Rating E1


5. Fire reaction (UNE EN 13.501-1)

C S2 d0

B S2 d0

S

F

6 mm.

6 mm.

ResultThicknessSpec.

REV:002

/July2006

Panel dimensions

Other thicknesses may be available upon request.

3, 6, 8, 10, 12, 14, 18 and 22 mm.

Smooth thicknessLength x width

2440 x 1220 mm. 10, 12, 14, 18 and 22 mm.

Chequerplate thickness

2. Dimensional tolerances

Thickness (t) EN 438-2 Part. 5

6,0 t < 8,08,0 t < 12,012,0 t < 16,016,0 t < 20,020,0 t < 25,0

mm

0,400,500,600,700,80

Length and width EN 438-2 Part. 6 - mm +10 / -0

Edge straightness EN 438-2 Part. 7 - mm/m 1,5

Edge squareness EN 438-2 Part. 8 - mm/m 1,5


1. Inspection requirements

Colour, pattern andsurface finish EN 438-8 Apto. 5.2.2.3

Du e to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure

differences are considered as normal. Singularities such as knots and resin inclusions are not considered asdefects, but as a part of the dcor. There are differences in light fastness performances depending on the woodspecies and the source of the wood.



34/44

Panel construction

Gureprex wear resistant overlay


Resin bonded WBP plywood core

HPL balancer

Assembly systems *

Exposed fastening. The Parklex panels

are fastened with stainless steel screws

or rivets to the treated wood or metal

substructure.

Hidden fastening, with special hanging

profiles. The Parklex panels are attached

to the aluminum substructure, using guide

profiles and hanging pins.


Parklex panels are fastened using adhesive

to the treated wood or metal substructure.

Hidden fastening, with caps. The Parklex

panels are attached with screws hidden

by caps with a diameter of 10,75mm and

a section of 2mm, using the same materialand finish as the panel.



*

Acoustics

Parklex 500 acoustic is designed for

interior wall and ceiling finishes requiring

high levels of acoustic absorption.

It is machined in different forms and

dimensions allowing for the desired level

of acoustic performance.

Slots Perforated

Woodskin. A finish that allows you to

feel the grain and subtlety of natural

timber.



500

Natural timber ceiling and wall finishes.

Parklex 500 is a timber panel manufactured from 100% natural

timber fibres, pressed under high temperatures and impreg-nated with thermoset resins using our exclusive Gureprex

system.




stained finishes).

Finish range

Ayous Natural

Sapelli (1)Reconstituted Oak (1)Natural Oak (1)

Quercus (1)

Wengue (1) Natural Zebrano (1)

OkumeWalnut (1)Maple (1)Grey Beech (1) Natural Beech (1) Green Beech (1)

Bryna (1) Cherry (1) Eucalyptus (1) Museum Ash (1)AntraAmbar Black

Onix

Rubi


35/44


Thickness 6 mm


Thickness (t) EN 438-2 Part. 5 mm

+ 1,0 / - 0,6+ 1,0 / - 0,7+ 1,2 / - 0,8+ 1,3 / - 0,9+ 1,4 / - 1,0+ 1,6 / - 1,2+ 2,0 / - 1,6





t = 6,0t = 8,0t = 11,0t = 14,0t = 20,0t = 25,0t = 40,0



Due to the fact that wood is a natural product, each veneer may be considered as unique. Colour and structure




D S3 d0

B S2 d0

S

F

8 mm.

14 mm.

ResultThicknessSpec.

3. General

(A) Ayous Natural, Bryna, Cherry, Museum Ash, Grey Beech, Natural Beech, Maple and Reconstituted Oak.

Resistance to scratching EN 438-2 Part. 25 Force Rating

Lightfastness (xenon arc) EN 438-2 Part. 27 Contrast Grey scale rating4

4 (A)

Flexural modulus EN 310Longitudinal directionTransversal direction

Mpa 7.0006.000

Flexural strength EN 310Longitudinal direction

Transversal direction

Mpa70

60

2

Resistance to inmersion inboling water EN 438-2 Part. 12 Aspect Rating 4

Resistance to surface wear EN 438-2 Part. 10 Resistance to surface wear 50150


RevolutionsInitial wear pointWear resistance


Perpendicular tensilestrength

Water resistance EN 438-7 Part. 4.13.3 Thickness increase % 7

Release of formaldehyde EN 717-1 Release of formaldehyde Rating E1

Density - Density Gr/cc 0,75

ASTM C 297 Adhesion force Mpa 2

Content of pentachlorophenol EN 438-7 Part. 4.10 Content pentachlorophenol ppm 5

Glue-line quality EN 438-7 Part. 4.13.3 Expression of results Rating 5

Resistance to elevated

temperature EN 438-7 Part. 4.13.3 Aspect Result No damage

Resistance to fixings EN 438-7 Part. 4.5 Force Nw/mm 200

Bonding strength EN 438-7 Part. 4.7 Bond strength Mpa 1,420

Flexural tensile strength EN 438-7 Part. 4.8 Bond strength Mpa 1,420


REV:002

/July2006

Panel dimensions

8, 11, 14, 17, 20 and26 mm.

Smooth thicknessLength x width

2440 x 1220 mm.



36/44

Panel construction



Resin bonded WBP plywood core

HPL balancer


Resistance to abrasion AC4

Resistance to abrasion

Maintenance. The non-porous nature of

the surface prevents the penetration ofdirt. Parklex 2000 requires no specific

stripping or re-finishing.

Cleaning. Mop with water and (neutral)

gel soap.

Maintenance and cleaning

Matt.A finish that provides a high quality,

comfortable surface appearance that onlyauthentic natural timber can provide.


2000

Natural timber floor for extreme wearenvironments.

Parklex 2000 is a natural timber floating floor made from the

highest quality veneers, impregnated using our exclusiveGureprex system. This provides extraordinary qualities of

dimensional stability and resistance to both abrasion and

humidity.




stained finishes).

Assembly systems *

Floating parquet. Floating installation of

boards glued tongue-in-groove over a

layer of insulation.

Glued. Installation of tongue-in-groove

boards that are adhered to waterproof

DM, using lines of adhesive.

Parquet over underfloor heating. Insta-

llation as floating parquet over underfloor

heating.



*

Finish range

Ayous Natural


Quercus (1)




Onix

Rubi


37/44

Thickness 14 mm








Gap between pieces EN 13.329 - mm 0,20

Leap between pieces EN 13.329 - mm 0,15


3. General

Flexural modulus EN 310 MPa7.0006.000

Longitudinal directionTransversal direction

Flexural strength EN 310 MPa

70

60

Resistance to cigarettes burns EN 438-2 Part.30 Aspect Degree 2

Resistance to surface wear EN 438-2 Part.10 Initial point (IP) Revolutions

AC4

4.000

Resistance to immersion inboiling water

EN 438-2 Part. 12 Aspect Degree

Impact resistance(small diameter ball)

EN 438-2 Part. 20 Force resort Nw 10

Density - Density Gr/cc 0,75

Resistance to stain EN 438-2 Part. 26 Aspect Rating (Groups 1 and 2)Rating (Group 3)

54

Light fastness (xenon arc) EN 438-2 Part. 27 Contrast Grey scale rating 44 (A)

Resistance to scratching EN 438-2 Part. 25 Force Degree 3

4


Longitudinal direction

Transversal direction



B fl S111 mm.

ResultThickness

Panel dimensions and package measurements

RE

V:003

/Jan

2007


PACKAGE MEASUREMENTS

Contents per package Maximum contents per pallet

PANEL DIMENSIONS(14 mm. thickness)

Length x width

2450 x 188 mm.

2450 x 290 mm.

2450 x 590 mm.

m2

88,3

59,7

60,7

Kg

960

800

800

No. of panels

8

1

1

m2

3,68

0,71

1,44

Kg

40

9,5

17

No. panels

192

84

42

No. packages

24

-

-


Slide EN 13.983Dynamic coefficient of

friction 0,73

Water tightness EN 13.553 Water penetration Classification Watertight

Pentachlorophenol content EN 12.673 Concentration ppm 5

Thermal conductivity EN 12.524 Conductivity W/(m K) 0,17

Tendency to accumulationelectrostatic charges EN 1.815 Potential difference KV 2 KV

Electric resistance EN 1.801 Vertical resistance M 825


Formaldehyde release EN 717-1 Classification Rating E1


38/44

Panel construction



HPL balancer


Matt.A finish that provides a high quality,

comfortable surface appearance that onlyauthentic natural timber can provide.


3000

Natural timber finish for full access raisedfloors.

Parklex 3000 is a high-density stratified timber panel, impreg-

nated using our exclusive Gureprex system. It may be adheredto any type of support material (fibreboard, MDF, fibre cement,

galvanised steel etc.) normally used to construct full access

floors.


Parklex panels are attached to differenttypes of supports, using adhesive.

Assembly systems *



*




stained finishes).

Finish range

Ayous Natural


Quercus (1)




Onix

Rubi


39/44


Thickness 1 mm


Planimetry EN 438-2 Part. 9 - mm/m 120




Thickness (t) EN 438-2 Part. 5 mm 0,15 mm


t = 1 mm

3. General

Resistance to cigarettes burns EN 4382- Part.30 Aspect Degree 2

Resistance to stain EN 4382- Part.26 AspectGroups 1 and 2

Group 354

Resistance to immersion inboiling water EN 4382- Part.12 Delamination Pass/Fail

Dimensional stability at hightemperatures EN 438-2 Part. 17

LT % max

0,751,25

Resistance to scratching EN 438-2 Part. 25 Force Degree 3

Light fastness (xenon arc) EN 4382- Part.27 Contrast Grey scale rating 44 (A)

Impact resistance(small diameter ball) EN 4382- Part.20 Force resort Nw 10

Pass

Resistance to surface wear EN 438-2 Part. 10 Resistance to surface wearRevolutions

Abrasion classInitial wear point

AC44.000

Density EN ISO 1.183 Density Gr/cc 1,10








REV:002

/June2007

Measurements

1 mm.

ThicknessStandard

610 x 610 mm.

Special dimensions available for other applications, upon request.

Maximum

2440 x 1220 mm.


40/44

Panel construction

PVDF Antigraffiti overlay


HPL core


Balancing film

Bakelite

Everlook

Finish range

Ambar Antra Copper Gold Onix Quartz Rubi Silver


High-density stratified timber panels for

external use.

ExternalFacade

Other Parklex products

NOTE. For more information about this product, consult the

Parklex Exteriors Catalogue, the External Parklex Assembly

Catalogue or our web page (www.parklex.com).

Parklex Facade is a high-density stratified timber panel

manufactured from kraft paper treated with resins thermoset

under high pressure and temperature, finished with natural

timber veneers highly resistant to UV radiation and atmospheric

agents.

Parklex Facade includes Everlook, a special overlay that

dramatically increases the normal life of the panel, improving

UV resistance and colour stability. It also allows for the de-

velopment of new panels with an extensive range of finishes.

Smooth. Traditional Parklex finish.

Reveals the simple, natural beauty of the

wood it is manufactured with.



41/44

1. Semilcos head officeVicenza, Italy.

Architect: Pollini+Smania

2. HospitalKorea.Architect: Seo hae-cheon

3. Children MuseumIreland.

Architect: Traynor OToole

4.Alhambra Information pointsGranada, Spain.

Architect: Francisco Martnez Manso, Rafael

Soler Mrquez

Applications

1.

2. 3.

4.


42/44


43/44


44/44

3000

2000

500

700

Facade

Documents

parklex_panouri_din_lemn_pentru_placari_interioare