Perel Latvia SIA

Sveicināti!Jauni produkti

2008

Perel Latvia SIA

Metrel Sprieguma & nepārtrauktības testeri

MD1000 MD1100

•LED modelis

•LCD modelis

•CAT IV 1000V

•3 gadu garantija

•RCD nostrādes tests

•IP65

Perel Latvia SIA

Tehniskā specifikācija

MD 1000-LEDPamata raksturojums

Sprieguma tests - 12 V ÷ 690 VAutomātiska AC/DC pazīšanaNepārtrauktības tests līdz 500 kΩFāzes & griežlauka testsRCD nostrādes testsDiožu testsGaismas diožu displejs

MD 1100-LCDPamata raksturojums

Sprieguma tests - 12 V ÷ 690 VAutomātiska AC/DC pazīšanaNepārtrauktības tests līdz 2000 ΩFāzes & griežlauka testsRCD nostrādes testsDiožu tests

• Auto Power Off

• Data Hold

• Apgaismojams šķidro kristālu displejs

Perel Latvia SIA

MetrelMI-3101 EurotestAT

Fast measurement using AUTO SEGUENCY

Simple to use

Standardized test report

Automatically detects possible hazardous measurement

Perel Latvia SIA

MetrelMI-3101 EurotestAT

AUTO SEQUENCE ® - Enhanced test performance, patented by Metrel – one programmable procedure with several Single Tests in sequence.

•Clearly visible information on big 320x240 dots matrix display with backlight.

•Locator function enables tracing fuses, lines and faults. (like MI-2093 cable tester)

•Date and time, related to each saved result.

•On-line voltage monitor shows voltage levels for L-L, L-N and L-PE during the measurement.

•Fast, reliable and accurate Loop L-PE resistance measurement without RCD tripping.

•Built-in Fuse characteristics database for quick evaluation of measuring results at LINE/LOOP impedance testing.

•Field-proven Earth resistance measuring method which eliminates stray earth currents during the measurement.

•TN/TT/IT Earthing System support.

•Multi-functional schuko Plug commander for faster execution of a measuring sequence.

•Built-in internal memory with professionally organized structure with up to 2000 locations.

•QUERTY keypad for creating names in installation's structure.

Perel Latvia SIA

MetrelMI-3101 EurotestAT

Help menu with connection diagrams and short

descriptions for all available functions

Continuity test uses N and PE wires for measurements to enable N-PE

Continuity verification on live installation through schuko-plug.

This means Auto sequence needn’t be interrupted to switch mains off.

Perel Latvia SIA

MetrelMI-3101 EurotestAT

Automatic measurement of installation resistance between all three wire pairs: L-N, L-PE and N-PE up to 1 Gohm.

Test voltages: 50V, 100V, 250V, 500V or 1000V

Two-point and three-point earth resistance measurement.

Perel Latvia SIA

MetrelMI-3101 EurotestAT

Complete RCD analysis also in automatic 6-steps RCDBy providing various test current 10mA 1000mA.

Multipliers ½ I to 5*I, Current polarities and shapes, (sin AC, pulsed A, general G and selective S)

Precise measurements of L-N and L-L line impedance in wide voltage range. 30V 440V

Measures also in RCD protected line with RCD trip lock function.

Extensive fuse characteristics database with built-in limit values.

Perel Latvia SIA

MetrelMI-3101 EurotestAT

Qwerty keypad on screen !! Create test report quickly !! Both USB and RS232

Insert our personal remarks simply drop & drag interface

Perel Latvia SIA

MetrelMI-3101 EurotestATStandard set

Instrument, carrying bag + belt, test tips 3pcs, alligator clips, plug commander, USB cable, test cable, power adapter + NiMH cells, instruction manual long + short, conformity declaration, production verification data, PC SW Euro link-lite.

Optional Accessories

Tip commander, earth set 20m, fast cells, charger for 12 cell, probe lead, earth set 50m, three phase cable, three phase adapter, selective probe, receiver, PC SW Euro link pro

Perel Latvia SIA

Multi M700 & M730Noplūdes strāvu mērītājs

FEATURES ● High Sensitive for Low Range Leakage Current ● Suitable for Measurement of 4-20mA DC Controlled Circuit ● DC mV Analog Signal Output ● Lowest Influence from Magnetization & Terrestrial Magnetism ● Wide Measuring Ranges - up to DC 1000mA & AC 10A

M700 & M730 M700 M730

Perel Latvia SIA

Multi M700 & M730 Specifikācija

•Measuring function : AC/DC current •Safety Standard : IEC1010-032 CATⅡ 600V or CATⅢ 300V •Measuring method : Clamp CT M730 (Slid/Hook Type M700) •Jaw opening capability : 5mmφ M700 ; 30 mmφM730•Measuring ranges : DC 100mA/1000mA, AC 100mA/1000mA/10A (45Hz ～ 65Hz)•Display : Max. 2000 count on LCD •Zero adjustment : For DC current range, by "0 ADJ" switch •Signal Output : DC 100mV full scale to each range •Circuit voltage : less than AC/DC 500V •Auto power off : Approx. 10 minutes •Consumption Current : Approx. 9mA (approx. 200h for continuous use) •Accessories : Soft Case, Batteries, Instruction Manual

Perel Latvia SIA

Paldies!